Refine
Year of Publication
- 2020 (71) (remove)
Document Type
- Peer-Reviewed Article (37)
- Report (12)
- Conference Object (8)
- Part of a Book (6)
- Contribution to Periodical (3)
- Working Paper (3)
- Master Thesis (2)
Language
- English (71) (remove)
D2.1 report on local EPC situation and cross-country comparison matrix : QualDeEPC H2020 project
(2020)
Considering that 40% of the European Union's energy consumption can be traced back to its buildings, it is essential to improve their energy efficiency in order to achieve the EU's energy efficiency targets. Both the rate of energy renovation and its depth, i.e. the amount of energy savings during a renovation, need to be improved. Energy Performance Certificates (EPC), regulated by the EU's Energy Performance of Buildings Directive (EPBD), are an important instrument to enhance the market uptake of energy-efficient new buildings and the energy-efficient renovation of existing buildings.
Against this background, the Horizon2020 funded project QualDeEPC will work on EU-wide convergence of the building assessment and the issuance, design, and use of quality-enhanced EPCs as well as their recommendations for building renovation. The aim is to make these recommendations coherent with deep energy renovation towards a nearly-zero energy building stock by 2050.
The first part of the QualDeEPC project (work package 2) aims to identify the priorities for elements of EPC schemes that show a need to be improved, and for which the project will investigate further and propose how the elements can be improved. The first step in identifying these priorities is taking stock of the existing EPC schemes. Based on the input from all national consortium partners and other sources, the Wuppertal Institute prepared this detailed overview of the country-specific EPC assessment and certification procedures and their links to other policies and programmes, existing initiatives, and projects. The analysis was based on a list of almost 50 potential options for enhancing the existing EPC schemes.
The aim of this deliverable is to present this stock-taking by a detailed analysis on which of the potential enhanced EPC elements are already implemented in which form in which country, covering all 28 countries that were EU member states until 31 January 2020. All partners conducted bilateral interviews with the major actors in the EPC procedures, including executive bodies on EPC at regional and/or national level. For countries not represented in the Consortium, Wuppertal Institut and EAP conducted specific literature research, e.g. from the Concerted Action EPBD, and aimed to obtain contributions from other member states. The information collected allows a detailed presentation on the elements implemented as well as a cross-country comparison matrix (see Annex I) in this report, which outlines the current EPC practices across the EU regarding the elements of a good practice scheme or innovative improvement options, their comparability, compliance with EU legislation, and to which extent they differ or converge.
The results show, once more, the high diversity in EPC schemes across the EU. They also provide useful information in at least two directions: 1) which improvement options are not yet implemented at all or in sufficient quality in most QualDeEPC partner countries as well as other EU member states, and could therefore be interesting candidates for the further work of the QualDeEPC project in development, testing, discussion, and possibly implementation of elements for enhanced and converging EPC schemes; and 2) which countries, within or beyond the QualDeEPC project, offer good practice examples for the implementation of these options that could serve to guide the development and implementation in other countries. This deliverable will thus serve as a basis for the upcoming tasks to develop priorities and actual proposals for improvement of EPC schemes.
CICERONE aims to bring national, regional and local governments together to jointly tackle the circular economy transition needed to reach net-zero carbon emissions and meet the targets set in the Paris Agreement and EU Green Deal. This document represents one of the key outcomes of the project: a Strategic Research & Innovation Agenda (SRIA) for Europe, to support owners and funders of circular economy programmes in aligning priorities and approaching the circular economy transition in a systemic way.
The German-Japanese Energy Transition Council (GJETC) was established in 2016 by experts from research institutions, energy policy think tanks, and practitioners in Germany and Japan.
The objectives and main activities of the Council and the supporting secretariats are to identify and analyze current and future issues regarding policy frameworks, markets, infrastructure, and technological developments in the energy transition, and to hold Council meetings to exchange ideas and propose better policies and strategies. In its second project phase (2018-2020), the GJETC had six members from academia on the Japanese side, and eight members on the German side, with one Co-Chair from each country.
From October 2018 to March 2020, the GJETC worked on and debated six topics:
1) Digitalization and the energy transition. 2) Hydrogen society. 3) Review of German and Japanese long-term energy scenarios and their evaluation mechanism. 4) Buildings, energy efficiency, heating/cooling. 5) Integration costs of renewable energies. 6) Transport and sector coupling.
The outputs and the recommendations of the second phase of the GJETC are summarized in this report.
Every diet has an impact on an individual's health status, the environment as well as on social aspects. In particular, ecological and social concerns are usually only vaguely assessed in the daily routines of out-of-home catering and a systematic sustainability assessment of meals is usually not carried out. Since May 2018, the menu calculator presented in this paper has been supporting stakeholders in various catering establishments with their sustainability assessment. The tool was developed within the NAHGAST project (www.nahgast.de) in cooperation with five practice partners and tested and validated by a total of 120 recipes. This article provides an overview of selected recipes' sustainability assessments (meals with fish and meat as well as vegetarian and vegan meals) and highlights the effects on the ecological, health and social dimensions.
Germany's eco-innovation performance has declined compared to previous reports and scores 123 against 100 of the EU average. It is still quite high with respect to the input side of eco-innovation and relatively good, i.e. above EU average concerning socio-economic and eco- innovative outputs. However, the revised eco-innovation index shows weaknesses in eco-innovation activities and environmental outcomes. All in all, Germany ranks 6 this year.
In current German debates on sustainable urbanisation and urbanism, new urban actors reviving buildings, brownfields or whole neighbourhoods are discussed as potential drivers of urban transformation towards sustainability as well as potential co-producers for conventional actors in urban development and planning. These actor's projects can be understood as spatially confined niches for experimentation with (built) urban space itself. Building upon the concepts of niche entrepreneurship (Pesch et al., 2017) and the framework of strategic action field theory (Fligstein & McAdam, 2011; 2015), we ask how these actors secure support for their projects and how these projects in turn are altered in this process. Based upon a case study from Wuppertal, Germany, we show that in struggling for support of powerful actors, these actors often have to significantly compromise, and that these compromises can be understood as contextualisation in the project's spatial and institutional environment.
Digitalisation is taking place at a fast pace in all European countries and it is transforming the economies, societies, communication, jobs and the necessary skills for the workplace and everyday life. The Covid-19 pandemic is also accelerating digitalisation at many levels.
To address the great challenges resulting from this, the European Commission has launched the Green Deal, a long-term transformation strategy towards an innovative and sustainable society. Three important initiatives under the Green Deal are the New Circular Economy Action Plan, the Biodiversity Strategy for 2030 and the Zero Pollution Action Plan. The various strategies and action plans draw up a large portfolio of measures, instruments and milestones that are always linked to digital technologies. Ideally, these are eco-innovative and sustainable and contribute to improving living conditions in Europe.
The EIO Biennial Report 2020, which looks at a different topic every two years, considers digitalisation a major opportunity to accelerate the transition to a circular Europe. In the current report, the authors provide an overview of eco-innovation trends, illustrated by digital technology and policy practices that can further drive the circular economy.
Science and education are central fields and a lever for sustainable development. With the newly developed student teaching and learning format "Transformative Innovation Lab" - TIL for short - students are to be enabled to conduct independent transformative research. To this end, the researchers, under the direction of the Wuppertal Institute, developed and tested the new learning concept in the project "Development, testing and dissemination of new qualification offers for 'change agents' for transformative learning using the real-world laboratory approach" (EEVA). The detailed results and numerous implementation tips have been published in a practical handbook aimed at academic teaching staff and other multipliers.
For some time, 3D printing has been a major buzzword of innovation in industrial production. It was considered a game changer concerning the way industrial goods are produced. There were early expectations that it might reduce the material, energy and transport intensity of value chains. However for quite a while, the main real world applications of additive manufacturing (AM) have been some rapid prototyping and the home-based production of toys made from plastics. On this limited basis, any hypotheses regarding likely impacts on industrial energy efficiency appeared to be premature. Notwithstanding the stark contrast between early hype and practical use, the diffusion of AM has evolved to an extent that at least for some applications allows for a preliminary assessment of its likely implications for energy efficiency.
Unlike many cross-cutting energy efficiency technologies, energy use of AM may vary substantially depending on industry considered and material used for processing. Moreover, AM may have much greater repercussions on other stages of value chains than conventional cross-cutting energy efficiency technologies. In case of AM with metals the following potential determinants of energy efficiency come to mind:
- A reduction of material required per unit of product and used during processing;
- Changes in the total number and spatial allocation of certain stages of the value chain; and
- End-use energy efficiency of final products.
At the same time, these various streams of impact on energy efficiency may be important drivers for the diffusion of AM with metals. This contribution takes stock of AM with metals concerning applications and processes used as well as early evidence on impacts on energy efficiency and combine this into a systematic overview. It builds on relevant literature and a case study on Wire Arc Additive Manufacturing performed within the REINVENT project.