Zukünftige Energie- und Industriesysteme
Refine
Has Fulltext
- yes (45) (remove)
Year of Publication
Document Type
- Peer-Reviewed Article (24)
- Report (11)
- Contribution to Periodical (4)
- Part of a Book (3)
- Book (1)
- Conference Object (1)
- Working Paper (1)
Language
- English (45) (remove)
Green hydrogen and synthetic fuels are increasingly recognized as a key strategic element for the progress of the global energy transition. The Middle East and North Africa (MENA) region, with its large wind and solar potential, is well positioned to generate renewable energy at low cost for the production of green hydrogen and synthetic fuels, and is therefore considered as a potential future producer and exporter. Yet, while solar and wind energy potentials are essential, other factors are expected to play an equally important role for the development of green hydrogen and synthetic fuels (export) sectors. This includes, in particular, adequate industrial capacities and infrastructures. These preconditions vary from country to country, and while they have been often mentioned in the discussion on green hydrogen exports, they have only been examined to a limited extent. This paper employs a case study approach to assess the existing infrastructural and industrial conditions in Jordan, Morocco, and Oman for the development of a green hydrogen and downstream synthetic fuel (export) sector.
Direct air capture (DAC) combined with subsequent storage (DACCS) is discussed as one promising carbon dioxide removal option. The aim of this paper is to analyse and comparatively classify the resource consumption (land use, renewable energy and water) and costs of possible DAC implementation pathways for Germany. The paths are based on a selected, existing climate neutrality scenario that requires the removal of 20 Mt of carbon dioxide (CO2) per year by DACCS from 2045. The analysis focuses on the so-called "low-temperature" DAC process, which might be more advantageous for Germany than the "high-temperature" one. In four case studies, we examine potential sites in northern, central and southern Germany, thereby using the most suitable renewable energies for electricity and heat generation. We show that the deployment of DAC results in large-scale land use and high energy needs. The land use in the range of 167-353 km2 results mainly from the area required for renewable energy generation. The total electrical energy demand of 14.4 TWh per year, of which 46% is needed to operate heat pumps to supply the heat demand of the DAC process, corresponds to around 1.4% of Germany's envisaged electricity demand in 2045. 20 Mt of water are provided yearly, corresponding to 40% of the city of Cologne's water demand (1.1 million inhabitants). The capture of CO2 (DAC) incurs levelised costs of 125-138 EUR per tonne of CO2, whereby the provision of the required energy via photovoltaics in southern Germany represents the lowest value of the four case studies. This does not include the costs associated with balancing its volatility. Taking into account transporting the CO2 via pipeline to the port of Wilhelmshaven, followed by transporting and sequestering the CO2 in geological storage sites in the Norwegian North Sea (DACCS), the levelised costs increase to 161-176 EUR/tCO2. Due to the longer transport distances from southern and central Germany, a northern German site using wind turbines would be the most favourable.
Transponder-based Aircraft Detection Lighting Systems (ADLS) are increasingly used in wind turbines to limit beacon operation times, reduce light emissions, and increase wind energy acceptance. The systems use digital technologies such as receivers of digital transponder signals, LTE/5G, and other information and communication technology. The use of ADLS will be mandatory in Germany both for new and existing wind turbines with a height of >100 m from 2023 (onshore) and 2024 (offshore), so a nationwide rollout is expected to start during 2022. To fully realize the benefits while avoiding risks and bottlenecks, a thorough and holistic understanding of the efforts required and the impacts caused along the life cycle of an ADLS is essential. Therefore, this study presents the first multi-aspect holistic evaluation of an ADLS. A framework for evaluating digital applications in the energy sector, previously developed by the authors, is refined and applied. The framework is based on multi-criteria analysis (MCA), life cycle assessment (LCA), and expert interviews. On an aggregated level, the MCA results show an overall positive impact from all stakeholders’ perspectives. Most positive impacts are found in the society and politics category, while most negative impacts are of technical nature. The LCA of the ADLS reveals a slightly negative impact, but this impact is negligible when compared to the total life cycle impact of the wind turbines of which the ADLS is a part. Besides the aggregated evaluation, detailed information on potential implementation risks, bottlenecks, and levers for life cycle improvement are presented. In particular, the worldwide scarcity of the required semiconductors, in combination with the general lack of technicians in Germany, lead to the authors’ recommendation for a limited prolongation of the planned rollout period. This period should be used by decision-makers to ensure the availability of technical components and installation capacities. A pooling of ADLS installations in larger regions could improve plannability for manufacturers and installers. Furthermore, an ADLS implementation in other countries could be supported by an early holistic evaluation using the presented framework.
Direct Air Capture (DAC) is increasingly being discussed as a possibility to limit climate change. In this study, a possible rollout of the DAC technology at German coastal areas is analysed based on an existing climate neutrality scenario. For the year 2045 the resulting costs as well as land, water and energy consumption are examined. It is concluded that a realization of the DAC technology in Germany might be possible from a technical point of view. However, there is a high demand for land and energy. Since a rollout is needed to start in 20 years at the latest, the required discussion and evaluation should be initiated as quickly as possible.
Roadmaps for India's energy future foresee that coal power will continue to play a considerable role until the middle of the 21st century. Among other options, carbon capture and storage (CCS) is being considered as a potential technology for decarbonising the power sector. Consequently, it is important to quantify the relative benefits and trade-offs of coal-CCS in comparison to its competing renewable power sources from multiple sustainability perspectives. In this paper, we assess coal-CCS pathways in India up to 2050 and compare coal-CCS with conventional coal, solar PV and wind power sources through an integrated assessment approach coupled with a nexus perspective (energy-cost-climate-water nexus). Our levelized costs assessment reveals that coal-CCS is expensive and significant cost reductions would be needed for CCS to compete in the Indian power market. In addition, although carbon pricing could make coal-CCS competitive in relation to conventional coal power plants, it cannot influence the lack of competitiveness of coal-CCS with respect to renewables. From a climate perspective, CCS can significantly reduce the life cycle GHG emissions of conventional coal power plants, but renewables are better positioned than coal-CCS if the goal is ambitious climate change mitigation. Our water footprint assessment reveals that coal-CCS consumes an enormous volume of water resources in comparison to conventional coal and, in particular, to renewables. To conclude, our findings highlight that coal-CCS not only suffers from typical new technology development related challenges - such as a lack of technical potential assessments and necessary support infrastructure, and high costs - but also from severe resource constraints (especially water) in an era of global warming and the competition from outperforming renewable power sources. Our study, therefore, adds a considerable level of techno-economic and environmental nexus specificity to the current debate about coal-based large-scale CCS and the low carbon energy transition in emerging and developing economies in the Global South.
Water availability plays an important role in the expansion planning of utility-scale solar power plants, especially in the arid regions of the Middle East and North Africa. Although these power plants usually account for only a small fraction of local water demand, competition for water resources between communities, farmers, companies, and power suppliers is already emerging and is likely to intensify in future. Despite this, to date there has been a lack of comprehensive studies analyzing interdependencies and potential conflicts between energy and water at local level. This study addresses this research gap and examines the linkages between water resources and energy technologies at local level based on a case study conducted in Ouarzazate, Morocco, where one of the largest solar power complexes in the world was recently completed. To better understand the challenges faced by the region in light of increased water demand and diminishing water supply, a mixed-method research design was applied to integrate the knowledge of local stakeholders through a series of workshops. In a first step, regional socio-economic water demand scenarios were developed and, in a second step, water saving measures to avoid critical development pathways were systematically evaluated using a participatory multi-criteria evaluation approach. The results are a set of water demand scenarios for the region and a preferential ranking of water saving measures that could be drawn upon to support decision-making relating to energy and water development in the region.
Especially in the arid areas of the Middle East and North Africa (MENA), water availability plays an important role in the expansion planning of industrial-scale solar power plants. Although power plants may account for only a very small portion of local water demand, competition for water with other sectors is expected to increase when water resources are insufficient for meeting local needs. This can lead to conflicts between different users (such as communities, farmers, tourism, businesses and utilities). Despite the increasing attention on the water-energy nexus, comprehensive studies analysing the interdependencies and potential conflicts between energy and water at the local level are absent.
To examine the linkages between water resources and energy technologies at the local level, this case study was selected because Morocco is one of the countries most affected by water scarcity and, at the same time, it is also one of the most promising countries in North Africa for the development of renewable energies and offers excellent conditions for solar and wind power plants. Nevertheless, the country's electricity system is still largely based on conventional energy sources, and the country is more than 95% dependent on energy imports. To strengthen the country's energy security and reduce the financial burden associated with energy imports, Morocco is pursuing an ambitious renewable energy expansion strategy: by 2020, around 42% of the national electricity demand should be met by renewable energies. In view of Morocco's ambitious plans, it is particularly important to identify the potential conflicts and synergies resulting from the expansion of renewable energies in relation to the water sector.
The energy sector today accounts for about 10% to 15% of global freshwater withdrawal. Most water in the energy sector is used for generating electricity, especially for cooling processes in thermal power plants. At the same time the demand for electricity is expected to increase significantly due to population growth and economic development in emerging and developing economies. Growing demand is also driven by electrification strategies pursued by industrialized countries to decarbonize their economies. With the global demand for electricity expected to increase significantly in the coming decades also the water demand in the power sector is expected to rise. However, due to the on-going global energy transition, the future structure of the power supply - and hence future water demand for power generation - is subject to high levels of uncertainty because the volume of water required for electricity generation varies significantly depending on both the generation technology and cooling system. In light of these challenges the objective of this analysis is to provide more systematic and robust answers in terms of the impacts of different decarbonization strategies in the electricity sector on water demand at global and regional level. The focus is on operational water use for electricity generation.
This report was prepared by the Wuppertal Institute in cooperation with the German Economic Institute as part of the SCI4climate.NRW project. The report aims to shed light on the possible phenomenon that the availability and costs of "green" energy sources may become a relevant location factor for basic materials produced in a climate-neutral manner in the future.
For this purpose, we introduce the term "Renewables Pull". We define Renewables Pull as the initially hypothetical phenomenon of a shift of industrial production from one region to another as a result of different marginal costs of renewable energies (or of secondary energy sources or feedstocks based on renewable energies).
Shifts in industrial production in the sense of Renewables Pull can in principle be caused by differences in the stringency of climate policies in different countries, as in the case of Carbon Leakage. Unlike Carbon Leakage, however, Renewables Pull can also occur if similarly ambitious climate policies are implemented in different countries. This is because Renewables Pull is primarily determined by differences in the costs and availability of renewable energies. In addition, Renewables Pull can also be triggered by cost reductions of renewable energies and by changing preferences on the demand side towards climate-friendly products. Another important difference to Carbon Leakage is that the Renewables Pull effect does not necessarily counteract climate policy.
Similar to Carbon Leakage, it is to be expected that Renewables Pull could become relevant primarily for very energy-intensive products in basic materials industries. In these sectors (e.g. in the steel or chemical industry), there is also the possibility that relocations of specific energy-intensive parts of the production process could trigger domino effects. As a result, large parts of the value chains previously existing in a country or region could also be subjected to an (indirect) Renewables Pull effect.
For the federal state of NRW, in which the basic materials industry plays an important role, the possible emergence of Renewables Pull is associated with significant challenges as climate policy in Germany, the EU and also worldwide is expected to become more ambitious in the future.
This report aims to enable and initiate a deeper analysis of the potential future developments and challenges associated with the Renewables Pull effect. Thus, in the final chapter of the report, several research questions are formulated that can be answered in the further course of the SCI4climate.NRW project as well as in other research projects.
The development of digital technologies is accelerating, enabling increasingly profound changes in increasingly short time periods. The changes affect almost all areas of the economy as well as society. The energy sector has already seen some effects of digitalization, but more drastic changes are expected in the next decades. Besides the very positive impacts on costs, system stability, and environmental effects, potential obstacles and risks need to be addressed to ensure that advantages can be exploited while adverse effects are avoided. A good understanding of available and future digital applications from different stakeholders' perspectives is necessary. This study proposes a framework for the holistic evaluation of digital applications in the energy sector. The framework consists of a combination of well-established methods, namely the multi-criteria analysis (MCA), the life cycle assessment (LCA), and expert interviews. The objective is to create transparency on benefits, obstacles, and risks as a basis for societal and political discussions and to supply the necessary information for the sustainable development and implementation of digital applications. The novelty of the proposed framework is the specific combination of the three methods and its setup to enable sound applicability to the wide variety of digital applications in the energy sector. The framework is tested subsequently on the example of the German smart meter roll-out. The results reveal that, on the one hand, the smart meter roll-out clearly offers the potential to increase the system stability and decrease the carbon emission intensity of the energy system. Therefore, the overall evaluation from an environmental perspective is positive. However, on the other hand, close attention needs to be paid to the required implementation and operational effort, the IT (information technology) and data security, the added value for the user, the social acceptance, and the realization of energy savings. Therefore, the energy utility perspective in particular results in an overall negative evaluation. Several areas with a need for action are identified. Overall, the proposed framework proves to be suitable for the holistic evaluation of this digital application.