Refine
Has Fulltext
- yes (46) (remove)
Year of Publication
Document Type
- Peer-Reviewed Article (15)
- Report (14)
- Working Paper (13)
- Contribution to Periodical (3)
- Part of a Book (1)
As illustrated by the case studies of end-of-life vehicles and waste electric and electronic equipment, the approach of an extended producer responsibility is undermined by the exports of used and waste products. This fact causes severe deficits regarding circular flows, especially of critical raw materials such as platinum group metals. With regard to global recycling there seems to be a responsibility gap which leads somehow to open ends of waste flows and a loss or down-cycling of potential secondary resources. Existing product-orientated extended producer responsibility (EPR) approaches with mass-based recycling quotas do not create adequate incentives to supply waste materials containing precious metals to a high-quality recycling and should be amended by aspects of a material stewardship. The paper analyses incentive effects on EPR for the mentioned product groups and metals, resulting from existing regulations in Germany. It develops a proposal for an international covenant on metal recycling as a policy instrument for a governance-oriented framework to initiate systemic innovations along the complete value chain taking into account product group- and resource group-specific aspects on different spatial levels. It aims at the effective implementation of a central idea of EPR, the transition of a waste regime still focusing on safe disposal towards a sustainable management of resources for the complete lifecycle of products.
Concerns over climate change and the security of industrial feedstock supplies have been opening a growing market for biobased materials. This development, however, also presents a challenge to scientists, policy makers, and industry because the production of biobased materials requires land and is typically associated with adverse environmental effects. This article addresses the environmental impacts of biobased materials in a meta-analysis of 44 life cycle assessment (LCA) studies. The reviewed literature suggests that one metric ton (t) of biobased materials saves, relative to conventional materials, 55 ± 34 gigajoules of primary energy and 3 ± 1 t carbon dioxide equivalents of greenhouse gases. However, biobased materials may increase eutrophication by 5 ± 7 kilograms (kg) phosphate equivalents/t and stratospheric ozone depletion by 1.9 ± 1.8 kg nitrous oxide equivalents/t. Our findings are inconclusive with regard to acidification (savings of 2 ± 20 kg sulfur dioxide equivalents/t) and photochemical ozone formation (savings of 0.3 ± 2.4 kg ethene equivalents/t). The variability in the results of life cycle assessment studies highlights the difficulties in drawing general conclusions. Still, common to most biobased materials are impacts caused by the application of fertilizers and pesticides during industrial biomass cultivation. Additional land use impacts, such as the potential loss of biodiversity, soil carbon depletion, soil erosion, deforestation, as well as greenhouse gas emissions from indirect land use change are not quantified in this review. Clearly these impacts should be considered when evaluating the environmental performance of biobased materials.
This article presents the accounts of China's Total Material Requirement (TMR) during 1995–2008, which were compiled under the guidelines of Eurostat (2009) and with the Hidden Flow (HF) coefficients developed by the Wuppertal Institute. Subsequently, comparisons with previous studies are conducted. Using decomposition, we finally examine the influential factors that have changed the TMR of China. The main findings are the following: (1) During 1995–2008 China's TMR increased from 32.7 Gt to 57.0 Gt. Domestic extraction dominated China’s TMR, but a continuous decrease of its shares can be observed. In terms of material types, excavation constituted the biggest component of China's TMR, and a shift from biomass to metallic minerals is apparent; (2) Compared with two previous studies on China's TMR, the amounts of TMR in this study are similar to the others, whereas the amounts of the used part of TMR (Direct Material Input, DMI) are quite different as a result of following different guidelines; (3) Compared with developed countries, China's TMR per capita was much lower, but a continuous increase of this indicator can be observed; (4) Factors of Affluence (A) and Material Intensity (T), respectively, contributed the most to the increase and decrease of TMR, but the overall decrease effect is limited.
The CO2 utilisation is discussed as one of the future low-carbon technologies in order to accomplish a full decarbonisation in the energy intensive industry. CO2 is separated from the flue gas stream of power plants or industrial plants and is prepared for further processing as raw material. CO2 containing gas streams from industrial processes exhibit a higher concentration of CO2 than flue gases from power plants; consequentially, industrial CO2 sources are used as raw material for the chemical industry and for the synthesis of fuel on the output side. Additionally, fossil resources can be replaced by substitutes of reused CO2 on the input side. If set up in a right way, this step into a CO2-based circular flow economy could make a contribution to the decarbonisation of the industrial sector and according to the adjusted potential, even rudimentarily to the energy sector.
In this study, the authors analyse potential CO2 sources, the potential demand and the range of applications of CO2. In the last chapter of the final report, they give recommendations for research, development, politics and economics for an appropriate future designing of CO2 utilisation options based upon their previous analysis.
Diese Studie untersucht den Zusammenhang zwischen Globalisierung, also der Zunahme der weltweiten Handelsverflechtungen, und ausgewählten ökologischen Implikationen unter besonderer Berücksichtigung von "Nord-Süd-Konstellationen". Obgleich der weltweite Handel sich Mitte der 90er Jahre deutlich vom Weltwirtschaftswachstum abgehoben hat und seitdem nahezu dreimal schneller ansteigt als das Weltsozialprodukt, steigen ausgewählte weltweite Umweltbelastungsindikatoren in Form von Energieverbrauch und CO2-Emissionen nicht in dem Maße an wie der Welthandel. Globalisierung führt offenbar nicht zu einem im gleichen Ausmaß ansteigenden globalen Umweltverbrauch. Im Rahmen einer derartigen Entkoppelung kann es jedoch hypothetisch zu Verlagerungen kommen. Derartige Verlagerungseffekte werden im vorliegenden Papier exemplarisch am Beispiel der globalen Stoffstromverflechtungen der Europäischen Union untersucht. Es zeigt sich, dass im Verlauf der Globalisierung die EU-Länder vermehrt Umweltbelastungen in die Länder des Südens verlagert haben, vor allem in Form von ökologischen Rucksäcken der Rohstoffimporte. Gleichzeitig wurde der Druck auf die inländische Umwelt in Form von Ressourcenabbauprozessen reduziert. Des Weiteren wurden vermehrt "umweltbelastungsintensive" Waren aus Schwellenländern und Entwicklungsländern importiert. Diese zeichnen sich durch emissionsseitige Umweltbelastungen in den jeweiligen Schwellenländern und Entwicklungsländern aus (industrielle Luft- und Wasseremissionen, Schwermetallemissionen). Dabei diente das verstärkt aus ausländischen Ressourcen gedeckte Materialaufkommen in der EU weniger dem inländischen Konsum; es wurde vor allem zur Herstellung von Gütern für den Export verwendet, und zeigt somit einen zunehmenden Beitrag der EU zum Ressourcenaufwand anderer Ökonomien an. Das Papier leitet ab, dass bei einer Strategie der Ressourcen-Produktivitätssteigerung in Industrieländern, die internationale Dimension unbedingt zu berücksichtigen ist. Längerfristig sollte der Ressourcenverbrauch der EU auch in absoluten Mengen vermindert werden. Dies wäre auch erforderlich, um die Umweltbelastungen durch Importe und Exporte zu vermindern.
This paper examines the connection between globalisation, with its growth in world trade links, and certain ecological effects especially concerning "North-South" relations. Although world trade in the mid-nineties was significantly uncoupled from growth trends in the world economy, so that since then it has increased nearly three times faster than the global GDP, certain indicators of energy use and CO2 emissions have not developed proportionately to world trade; globalisation evidently does not lead to a situation where pressures on the environment are increasing to the same extent worldwide. This de-linking may, however, result in the kind of shifts that we examine here with reference to the material trade flows of the European Union. It will be shown that, in the course of globalisation, the countries of the EU have increasingly shifted environmental burdens on to the countries of the South, especially in the form of ecological rucksacks of imported raw materials, while at the same time reducing the pressure on their own domestic environment by extracting fewer material resources. Furthermore, goods whose production places intensive pressure on the environment (industrial emissions into the atmosphere and water, heavy metal emissions, etc.) have been increasingly imported from newly industrializing or developing countries. The greater covering of material requirements from foreign resources has served not so much the EU's internal consumption as its own production of export goods; this shows that the EU has an increasing share in the resource requirement of other economies. The paper concludes that it is absolutely necessary to consider the international dimension in any strategy for more productive use of resources in industrial countries. In the long term, the EU's resource use should also be reduced in absolute terms. This will also be necessary in order to reduce the pressure on the environment due to imports and exports.
Im Auftrag des Bundesforschungsministeriums hat das Wuppertal Institut eine Studie zur systemischen Betrachtung und Modellierung der Bioökonomie erstellt. Sie zeigt Wege auf, die komplexen sozio-ökonomischen Zusammenhänge und Umweltauswirkungen der Bioökonomie zu erfassen und soll als Grundlage für den Aufbau eines kontinuierlichen Monitorings dienen. Die Autor(inn)en erfassten Indikatoren und Modellierungsmethoden mit Bezug zur Bioökonomie und weisen auf bestehende Lücken hin: Diese finden sich vor allem bei der Erfassung neuer technologiegetriebener Sektoren, der systemischen Betrachtung eines nachhaltigen Konsums und bei der Modellierung der Zusammenhänge zwischen Innovationen, Wirtschaftswachstum und Ressourcenverbrauch (insbesondere die Landnutzung).
Zur Umsetzung eines systemischen Monitorings empfiehlt die Studie das folgende Vorgehen: Unter Zuhilfenahme des DPSIR-Konzeptes (Analyse von Wirkungsbeziehungen nach Driving forces, Pressures, States, Impacts und Responses) sollten Schlüsselindikatoren und Nachhaltigkeitsziele in einem Indikatoren-"Dashboard" zusammengeführt werden. Benötigt wird zudem ein Werkzeugkasten von Methoden, der vor allem integrierte Analyse- und Bewertungsmodelle sowie ein systemisch konzipiertes Metamodell umfasst.