Refine
Year of Publication
Document Type
- Peer-Reviewed Article (22)
- Report (16)
- Working Paper (12)
- Conference Object (6)
- Contribution to Periodical (6)
- Part of a Book (5)
- Book (1)
Division
- Nachhaltiges Produzieren und Konsumieren (68) (remove)
Food production is responsible for approximately 17% of Germany's greenhouse gas (GHG) emissions. After retail, out-of-home catering is the second largest food sales channel in Germany. A variety of means on both the supply and demand side are necessary to stimulate, facilitate and encourage a more sustainable development and minimise GHG emissions in this sector. Nudges are one of these. This paper's focus lies on the demand side. Set in real-world laboratories, we use a standardised empirical approach to compare different nudging interventions belonging to the area of physical environment and consumers’ choice making process. We compare the effects of the same intervention across different settings and the effect of different, sequential nudging interventions in the same setting. Data was collected in eight workplace and school cafeterias in Germany over two project iterations (2016/2017; 2019/2020). A similar intervention design was applied. Comparability was assured by a harmonised menu. The first project iteration revealed that only one nudge (top menu position, +22.5%) led to significant increases in sustainable food choices, while results from the second iteration showed that all nudge interventions (best counter position, +11.6%; top menu position, +6,9%; label plus information, +15.9%) positively influenced consumer choice. Possible explanations such as the stricter compliance to the experimental design in the cafeterias but also societal developments such as the appearance of the Fridays for Future movement are discussed. As results vary between specific locations and settings, our findings suggest that nudges need to be adjusted to situational conditions for achieving highest efficacy.
Every diet has an impact on an individual's health status, the environment as well as on social aspects. In particular, ecological and social concerns are usually only vaguely assessed in the daily routines of out-of-home catering and a systematic sustainability assessment of meals is usually not carried out. Since May 2018, the menu calculator presented in this paper has been supporting stakeholders in various catering establishments with their sustainability assessment. The tool was developed within the NAHGAST project (www.nahgast.de) in cooperation with five practice partners and tested and validated by a total of 120 recipes. This article provides an overview of selected recipes' sustainability assessments (meals with fish and meat as well as vegetarian and vegan meals) and highlights the effects on the ecological, health and social dimensions.
Cross-country evidence on the adoption of energy-efficient retrofit measures (EERMs) in residential buildings is critical to supporting the development of national and pan-European policies aimed at fostering the energy performance upgrade of the building stock. In this light, the aim of this paper is to advance in the understanding of the probability of certain EERMs taking place in eight EU countries, according to a set of parameters, such as building typology, project types, and motivation behind the project. Using these parameters collected via a multi-country online survey, a set of discrete-choice (conditional logit) models are estimated on the probability of selecting a choice of any combination of 33 EERMs across the sampled countries. Results show that actions related to the building envelope are the most often-addressed across countries and single building elements or technology measures have a higher probability of being implemented. The modelling framework developed in this study contributes to the scientific community in three ways: (1) establishing an empirical relationship among EERMs and project (i.e., retrofit and deep retrofit), (2) identifying commonalities and differences across the selected countries, and (3) quantifying the probabilities and market shares of various EERMs.
The data centre industry (DCI) has grown from zero in the 1980s, to enabling 60% of the global population to be connected in 2021 via 7.2 million data centres. The DCI is based on a linear economy and there is an urgent need to transform to a Circular Economy to establish a secure supply chain and ensure an economically stable and uninterrupted service, which is particularly difficult in an industry that is comprised of ten insular subsectors. This paper describes the CEDaCI project which was established to address the challenge in this unique sector; this ground-breaking project employs a whole systems approach, Design Thinking and the Double Diamond methods, which rely on people/stakeholder engagement throughout. The paper reviews and assesses the impact of these methods and project to date, using quantitative and qualitative research, via an online sectoral survey and interviews with nine data centre and IT industry experts. The results show that the project is creating positive impact and initiating change across the sector and that the innovative output (designs, business models, and a digital tool) will ensure that sectoral transformation continues; the project methods and structure will also serve as an exemplar for other sectors.
Agriculture is an economic sector with massive impact on biodiversity and agrobiodiversity. Sustainable diets represent a critical policy leverage and a realistic opportunity to reduce the environmental impact of the agro-food sector while improving human health at the same time. Eating out is an increasingly common habit for many consumers and, by offering sustainable dishes, catering companies can play a central role. To do this, they need to understand and correctly assess the sustainability of their food portfolio, but assessment tools are not well established yet. The NAHGAST project, of which this study was part, developed and tested a sustainability assessment tool for catering companies based on concrete targets defined per meal. This study addresses the lack of methods to evaluate the impact of food on biodiversity, with a particular focus on agrobiodiversity. The work illustrates a context-specific application of an enhanced DPSIR model to structure information and select indicators, and proposes a transdisciplinary use of existing metrics. Further research is needed in order to define scientifically sound target values or sustainability ranges for each indicator per meal, in order to calculate them. Strengths and limits of the study are discussed.
The demand for metals from the entire periodic table is currently increasing due to the ongoing digitalization. However, their use within electrical and electronic equipment (EEE) poses problems as they cannot be recovered sufficiently in the end-of-life (EoL) phase. In this paper, we address the unleashed dissipation of metals caused by the design of EEE for which no globally established recycling technology exists. We describe the European Union's (EU) plan to strive for a circular economy (CE) as a political response to tackle this challenge. However, there is a lack of feedback from a design perspective. It is still unknown what the implications for products would be if politics were to take the path of a CE at the level of metals. To provide clarification in this respect, a case study for indium is presented and linked to its corresponding recycling-metallurgy of zinc and lead. As a result, a first material-specific rule on the design of so-called "anti-dissipative" products is derived, which actually supports designing EEE with recycling in mind and represents an already achieved CE on the material level. In addition, the design of electrotechnical standardization is being introduced. As a promising tool, it addresses the multi-dimensional problems of recovering metals from urban ores and assists in the challenge of enhancing recycling rates. Extending the focus to other recycling-metallurgy besides zinc and lead in further research would enable the scope for material-specific rules to be widened.
Die Wirtschaftsleistung von Deutschland ist durch die Corona-Pandemie stark beeinträchtigt. Um die Wirtschaft zu beleben, einigten sich die Regierungsparteien am 3. Juni 2020 in ihrem Koalitionsausschuss auf ein "Konjunktur- und Krisenbewältigungspaket" sowie ein "Zukunftspaket" in Höhe von insgesamt 130 Milliarden Euro. Für 2020 und 2021 sind fast 60 Maßnahmen vorgesehen, die von steuerlichen Vergünstigungen bei der Mehrwertsteuer bis hin zu konkreten Investitionen in Zukunftstechnologien reichen. Mit Blick auf den Klimaschutz beinhaltet das Maßnahmenpaket der Großen Koalition zwar gute Ansätze und viele wichtige Impulse, die allerdings zu verpuffen drohen, wenn sie nicht durch eine konsequente und nachhaltig ausgerichtete Klimapolitik flankiert werden. Zudem fehlen für den Klimaschutz wichtige Bereiche, wie Investitionen in die Kreislaufwirtschaft. Außerdem werden Maßnahmen zur Steigerung der Energieeffizienz nur unzureichend berücksichtigt. Gerade in diesen Bereichen hätten sich konjunkturbelebende Effekte und Klimaschutz in idealer Form ergänzen können, kritisiert das Wuppertal Institut. Dieses Diskussionspapier reagiert auf die vorliegenden Vorschläge und fasst zusammen, welche Maßnahmen im Rahmen der jetzt anstehenden Umsetzungsphase nachgebessert werden sollten und wo Ergänzungen notwendig sind.
Recent research on the natural resource use of private consumption suggests a sustainable Material Footprint of 8 tons per capita by 2050 in industrialised countries. We analyse the Material Footprint in Germany from 2015 to 2020 in order to test whether the Material Footprint decreases accordingly. We studied the Material Footprint of 113,559 users of an online footprint calculator and predicted the Material Footprint by seasonally decomposed autoregressive (STL-ARIMA) and exponential smoothing (STL-ETS) algorithms. We find a relatively stable Material Footprint for private consumption. The overall Material Footprint decreased by 0.4% per year between 2015 and 2020 on average. The predictions do not suggest that the Material Footprint of private consumption follows the reduction path of 3.3% per year that will lead to the sustainable consumption of natural resource
Die Modellierungs-Studie "Reparaturkosten-Empfehlung" wurde vom Wuppertal Institut im Auftrag der Verbraucherzentrale Nordrhein-Westfalen erstellt. Die Studie zielt auf die Berechnung von maximalen Reparaturkosten, die für eine Reparatur aus finanzieller Sicht sinnvoll für Verbraucherinnen und Verbraucher sind. Zusätzlich wird die ökologische Vorteilhaftigkeit von Reparaturen beispielhaft diskutiert.
Gesund, umweltfreundlich und sozialverträglich : wie ein Onlinetool hilft, nachhaltiger zu kochen
(2020)
Jede Kostform hat Auswirkungen auf den individuellen Gesundheitsstatus, die Umwelt und soziale Aspekte. Insbesondere ökologische und soziale Belange werden im Alltag der Außer-Haus-Verpflegung in der Regel nur vage abgeschätzt, eine systematische Nachhaltigkeitsbewertung von Speisen findet zumeist nicht statt. Seit Mai 2018 unterstützt der hier vorgestellte Menü-Rechner Akteure in unterschiedlichen Verpflegungseinrichtungen bei der Nachhaltigkeitsbewertung. Das Instrument wurde im Rahmen des NAHGAST-Projektes (www.nahgast.de) in Kooperation mit fünf Praxispartnern entwickelt und durch insgesamt 120 Rezepturen getestet und validiert. Der vorliegende Artikel gibt einen Überblick über Nachhaltigkeitsbewertungen ausgewählter Rezepturen (Gerichte mit Fisch und Fleisch, sowie vegetarische und vegane Gerichte) und stellt heraus, welche Effekte sich für die ökologische, gesundheitliche und soziale Dimension zeigen.