Refine
Document Type
- Report (33)
- Peer-Reviewed Article (27)
- Working Paper (7)
- Part of a Book (5)
- Conference Object (4)
- Doctoral Thesis (2)
- Contribution to Periodical (1)
Language
- English (79) (remove)
Division
- Kreislaufwirtschaft (79) (remove)
Electronics containing growing quantities of high value and critical metals are increasingly used in automobiles. The conventional treatment practice for end-of-life vehicles (ELV) is shredding after de-pollution and partial separation of spare parts. Despite opportunities for resource recovery, the selective separation of components containing relevant amounts of critical metals for the purpose of material recycling is not commonly implemented. This article is aimed to contribute to recycling strategies for future critical metal quantities and the role of extended material recovery from ELVs. The study examines the economic feasibility of dismantling electronic components from ELVs for high value metal recycling. The results illustrate the effects of factors as dismantling time, labour costs and logistics on the economic potential of resource recovery from ELVs. Manual dismantling is profitable for only a few components at the higher labour costs in western/northern parts of Europe and applicable material prices, including the inverter for hybrid vehicles, oxygen sensor, side assistant sensor, distance and near distance sensors. Depending on the vehicle model, labour costs and current material prices, manual dismantling can also be cost-efficient for also some other such as the heating blower, generator, starter, engine and transmission control, start/stop motor, drive control, infotainment and chassis control.
Germany's eco-innovation performance has declined compared to previous reports and scores 123 against 100 of the EU average. It is still quite high with respect to the input side of eco-innovation and relatively good, i.e. above EU average concerning socio-economic and eco- innovative outputs. However, the revised eco-innovation index shows weaknesses in eco-innovation activities and environmental outcomes. All in all, Germany ranks 6 this year.
Digitalisation is taking place at a fast pace in all European countries and it is transforming the economies, societies, communication, jobs and the necessary skills for the workplace and everyday life. The Covid-19 pandemic is also accelerating digitalisation at many levels.
To address the great challenges resulting from this, the European Commission has launched the Green Deal, a long-term transformation strategy towards an innovative and sustainable society. Three important initiatives under the Green Deal are the New Circular Economy Action Plan, the Biodiversity Strategy for 2030 and the Zero Pollution Action Plan. The various strategies and action plans draw up a large portfolio of measures, instruments and milestones that are always linked to digital technologies. Ideally, these are eco-innovative and sustainable and contribute to improving living conditions in Europe.
The EIO Biennial Report 2020, which looks at a different topic every two years, considers digitalisation a major opportunity to accelerate the transition to a circular Europe. In the current report, the authors provide an overview of eco-innovation trends, illustrated by digital technology and policy practices that can further drive the circular economy.
The paper undertakes a closer look on the relation of institutions and policy mixes within the multi-level scope of the European Union in the policy field of resource efficiency and maps out different configurations. Based on an extensive analysis of scope, foci, instruments and especially the distribution of institutional responsibilities in 32 EU countries, the paper aims to amplify the categorisation of policy mix characteristics developed by Rogge and Reichardt by considerations on the institutional background of policy mixes. It specifically brings into question the potential impact of different institutional settings on the consistency and coherence of approaches in this evolving policy field. Resource efficiency is an eminently cross-cutting policy concept and a specific interesting unit of analysis due to the observable heterogeneity of implementation approaches. However, it is still mainly disconnected from energy issues and, at the same time, EU policy has shifted to the circular economy approach, indicating further need for streamlining with the resource efficiency approach. The paper stresses the need to include institutional and multi-level governance issues for policy design and the development of policy mixes, especially in the context of the now refocused resource efficiency agenda to the transition to a circular economy.
The key objective of this deliverable is to gain insights on and assess how CE is being implemented and R&I is being funded at regional level, e.g., via the RIS3 strategy and Structural Funds. As such it sets the scope for the project and provides the background against which programmes and measures can be understood, assessed, developed and recommended in succinct tasks and work packages. The objective of this report is to provide a concise overview of the current R&I priorities, as expressed in running and newly introduced funding and legislative measures with respect to Circular Economy in European countries and regions.
Against the background of the question which role tax based instruments have to play in policy mixes to counteract the unbroken growth trend of global resource use, this chapter initially describes how the insights from a country comparative study on national resource policy frameworks could be linked to instruments for the internalisation of external environmental costs on a European scale. On the basis of a project specific but substantiated resource use vision and potential governance principles for three transition processes to reach the goals, the tax concepts are subsequently connected to simulation scenarios in order to illustrate the resource impacts that could be achieved by those policy reforms. Conclusively, barriers to such fundamental changes of framework conditions are briefly reflected upon and some conclusions are drawn.
On the basis of a literature research, this subtask develops a conceptional framework for a common understanding of CE within the project team and for the following work packages and tasks. After a brief introduction into the objectives and the context of a circular economy, a more elaborated look into the necessity of an explicit understanding of CE, the objectives, the spatial perspective of CE and the specific challenges within the CICERONE context will be done, in order to develop a basis for a common understanding within the project context. Circular economy can and has to be understood as an (eco-)innovation agenda. Therefore, the paper investigates the role policy has to play to support innovation for a CE transition, for creating the framework conditions and why CE has also to be build from the ground up. Finally, the paper looks from two perspectives at emerging trends and business models in a CE to sketch next steps towards the transition in a selection of central sectors. Conclusions are drawn on the basis of the insights gained by the preceding chapters.
The earth as we know it can only continue to exist if humanity finds a way to switch to a sustainable use of energy and resources. This work contributes to the research carried out to achieve this goal by improving the coating of adsorptive materials. These are used in heat transformation and drying processes that allow for efficient temperature and humidity control in buildings. A central component of these adsorptive coatings is the binder that acts as "glue" in the manufacturing of the coating. In this work the methods to evaluate binder performance regarding their thermal stability under the process conditions, their mechanical stability and their influence on the adsorptive properties of the coating were established. The coatings have to meet special requirements due to the thermal stresses and low pressure atmosphere they experience in these applications. A selection of silicone binders was then characterized with the established tests according to these requirements. Additionally a selection of inorganic binders was investigated because they allow for the use of high desorption temperatures and thus a high energy efficiency of the process. Out of these binders Silres® MP50E emerged as the most promising one due to very good adsorptive properties of the coating, its good temperature stability and ease of use. While some of the inorganic binders showed very good adsorptive properties and temperature stability the mechanical stability of all inorganic binders was not sufficient for their use in adsorption heat transformation technology. This is the first time that a broad selection of binders was evaluated with regards to adsorptive coatings and the results published in literature. With a suitable binder identified, the next step was to optimize the coating of the heat exchangers in order to work out how to manufacture the most efficient and powerful heat exchangers. Samples with different coating thicknesses were manufactured in small scale and full scale and their adsorption behavior was characterized. It could be shown for the first time that it is possible to increase energy efficiency by improving the mass ration of adsorber to coating and increase the delivered power at the same time. This was shown for small and full scale samples. It was shown that under the corresponding conditions the heat transfer from the coating layer to the adsorber metal substrate is the limiting step in the process. These results can now be used for the planning and construction of adsorbers. With knowledge of a suitable binder and how to coat efficient, powerful adsorbers, the coating process itself was improved to allow for industrial scale manufacturing. A central point here is the ability to control slurry rheology. Out of many rheology additives those that are suited for the application in adsorption heat transformation were identified and their influence on the slurry rheology thoroughly characterized. Additionally the process of slurry preparation could be simplified for several different adsorbents. Here it was shown that the supersonic deagglomeration step is not necessary to prepare a slurry. Extending the possible coating techniques and in addition to the dip coating process used so far, the spray coating of adsorptive coatings was established for the first time in literature. This process is widely used in the industry and allows for easier plugin into existing coating processes. For the coating of high resolution patterns a proof of concept of the screen printing process was carried out.
The construction sector is the second largest area for the application for plastics. Due to the long life times of construction products, the implementation of the circular economy faces its own challenges. To investigate this challenge, the study covers a market study for Germany, voluntary take-back and recycling schemes of construction products, as well as the use of plastic recyclates in construction products. In addition, plastic packaging of construction products is covered. Opportunities and barriers to the use of recycled plastics in construction products are derived from the intersection of available technologies, recyclate supply, and technical requirements for construction products. The report concludes with recommendations to various stakeholders on how to promote the use of recyclates in construction products and their packaging. Important points here are the introduction of a recyclate quota for films as construction product packaging and the description of recycling possibilities and recyclate content in the technical documentation of construction products.