Addressing food waste prevention is one target of the Sustainable Development Goals (SDGs) and a major task for the UN Environmental Programme and the European Commission. It is promising in terms of its environmental saving potential. However, it also leads to consumers being able to save money, which they then are likely to spend, thus again causing a negative environmental impact. This dimension of the so-called indirect rebound effect, which prevents the desired ecological benefits from being achieved, is investigated in this paper. By using a single-region environmentally extended input-output model from a production perspective, the indirect rebound effects from food waste prevention in Germany are analysed. Any political action needs to consider not only a differentiation in income class, but also alternative concepts such as the principles of sufficiency in order to achieve all ecological benefits and specifically the third target of SDG 12.
Renewable energy targets in the European Union (EU) have raised the demand for timber and are expected to increase dependence on imports. However, EU timber consumption levels are already disproportionally high compared to the rest of the world. The question is, how much timber is available for the EU to sustainably harvest and import, in particular considering sustainable forest management practices, a safe operating space for land-system change, and the global distribution of "common good" resources. This article approaches this question from a supply angle to develop a reference value range for the current as well as future sustainable supply of timber at the EU-27 and global levels. For current supply estimates, national-level data on forest area available for wood supply, productivity in that area, as well as the rate available for harvest were collected and aggregated into three potential supply scenarios. For future supply estimates, a safe operating space scenario halting land use change, a sensitivity analysis, and a literature review were performed. To provide both a comparison of global versus EU sustainable supply capacities and to develop a benchmark toward evaluating and comparing levels of consumption to sustainable supply capacities, per capita calculations were made. Results revealed that the per capita sustainable supply potential of EU forests is estimated to be around three times higher than the global average in 2050. Whether a global or EU reference value is more appropriate for EU policy orientation, considering both strengthened economic and cultural ties to the forest in forest-rich countries as well as the need to prevent problem shifting associated with exporting land demands abroad, is discussed. Further research is needed to strengthen and harmonize data, improve methods for modeling future scenarios and incorporate interdisciplinary and multi-stakeholder perspectives toward the development of robust and politically relevant reference values for sustainable consumption levels.
How do recent changes in consumption in the wake of the COVID-19 pandemic affect the avoidance of packaging waste? How can an increase in packaging waste be countered and the previous trend towards unpackaged and reusable solutions be revived and promoted?
To tackle these questions, we use a systemic approach that regards packaging as a network of interrelated interests of industry (manufacturing and logistics), trade (retail and catering), consumers and the waste management sector. To analyse this network, we applied three methods. First, we analysed secondary sources such as surveys. Second, we conducted semi-structured interviews with seven actors from industry, consumer education and waste management in May and June 2020. Third, we used the questions from the interview guideline to do an online survey among representatives of the public waste management industry.
Nowadays, high expectations are set for a digitally enabled circular economy (CE), to enhance resource efficiency. Tracing, tracking, and storing information is most important for this. In this paper, the application of Internet of Things (IoT) and Distributed Ledger Technology (Blockchain) are hence discussed by presenting the case of professional Electrical and Electronic Equipment (EEE) in Italy. Within the context of CE, prevention of electronic waste (WEEE) is extremely relevant as it is a fast-growing waste stream, and the products contain environmentally damaging substances as well as valuable and rare materials. The use of a proper combination of IoT and blockchain can help the producers to keep control on products until EEE end-of-life, while promoting CE strategies and supporting decision-making. Based on the outcomes of five interviews conducted in 2019 to companies of the EEE sector, potential improvements in the EEE end-of-use management are discussed. After providing the definition of requirements for both the technical solution and its testing are provided, three solution variations and the related business models are created and presented, as well as considerations on their environmental and economic impacts. The study shows how digital technologies can support the appropriate and circular management of EEE products and WEEE.
Unvermeidbare Emissionen aus der Abfallbehandlung : Optionen auf dem Weg zur Klimaneutralität
(2022)
Auch die thermische Abfallbehandlung in Deutschland kann zu einem Baustein des klimaneutralen Wirtschaftens werden. Allerdings sind dafür noch verschiedene Voraussetzungen zu schaffen. Technisch sind neben den bereits bekannten weitere innovative Verfahren in der Entwicklung; nicht zu vernachlässigen ist zudem die anspruchsvolle Aufgabe des CO2-Handlings. Hier ist zum einen der Aufbau der benötigten Infrastruktur zu nennen. In Bezug auf die Nutzung des abgetrennten CO2 ist auch die Industrie gefragt, um sektorübergreifende, klimafreundliche Use-Cases und Geschäftsmodelle rund um CCU und die weitmöglichste Schließung von Kohlenstoffkreisläufen zu entwickeln. Entsprechende Regularien und Marktanreize sind politisch zu setzen.
With the introduction of the Roadmap to a Resource Efficient Europe (2011) and the more recent commitment of The Action Plan towards the Circular Economy (2015), the European Commission (EC) has expressed its fundamental interest to substantially improve the resource efficiency of the European economy and enable the transition towards the Circular Economy (CE). This policy push has meanwhile been complemented by some quite ambitious national programmes for RE and CE and institutional advances but it is not yet bound to targets or mandatory reporting.
Against this background, the objective of this paper is to give a comprehensive overview of the current policy frameworks at EU and a selection of MSs and provide insights into the elements shaping policy processes. The analytical framework relies on three essential interconnected components: the policy framework, the economic incentive system and economic side policies which are relevant in the context of RE and CE and actor constellations. The paper does this looking at the interface between EU-MSs. The analysis is based on different empirical surveys in which the policy development is observed and discussed (EEA 2011, 2016a, 2016b, EIO 2013, 2014, 2016) and a comprehensive review of legislative and policy frameworks at the EU and selected MSs, undertaken as part of the project POLFREE (Policy option for a Resource-Efficient Economy) (Domenech et al., 2014, Bahn-Walkowiak et al., 2014). The analysis reveals that policy frameworks for RE/CE are complex and fragmented as competing goals and visions reduce effectiveness of measures. The paper makes recommendations as to how EU and MS policies could improve RE in a coordinated way, but recognizes that achieving such coordination will be challenging in the current political context.
The contribution of the EU bioeconomy to sustainable development depends on how it is implemented. A high innovation potential is accompanied by considerable risks, in particular regarding the exacerbation of global land use conflicts. This article argues that a systemic monitoring system capable of connecting human-environment interactions and multiple scales of analysis in a dynamic way is needed to ensure that the EU bioeconomy transition meets overarching goals, like the Sustainable Development Goals. The monitoring should be centered around a dashboard of key indicators and targets covering environmental, economic, and social aspects of the bioeconomy. With a focus on the land dimension, this article examines the strengths and weakness of different economic, environmental and integrated models and methods for monitoring and forecasting the development of the EU bioeconomy. The state of research on key indicators and targets, as well as research needs to integrate these aspects into existing modeling approaches, are assessed. The article concludes with key criteria for a systemic bioeconomy monitoring system.
Supply risks and environmental concerns drive the interest in critical raw material recycling in the European Union. Globally, waste electrical and electronic equipment (WEEE) is projected to increase by almost 40% until 2030. This waste stream can be a source of secondary raw materials. The determination of the economic feasibility of recycling and recovering specific materials is a data-intensive, time-consuming, and case-specific task. This study introduced a two-part evaluation scheme consisting of upper continental crust concentrations and raw material prices as a simple tool to indicate the potential and limitations of critical raw material recycling. It was applied to the case of light-emitting diodes (LED) lamps in the EU. A material flow analysis was conducted, and the projected waste amounts were analyzed using the new scheme. Indium, gallium, and the rare earth elements appeared in low concentrations and low absolute masses and showed only a small revenue potential. Precious metals represented the largest revenue share. Future research should confirm the validity and usefulness of the evaluation scheme.
The paper undertakes a closer look on the relation of institutions and policy mixes within the multi-level scope of the European Union in the policy field of resource efficiency and maps out different configurations. Based on an extensive analysis of scope, foci, instruments and especially the distribution of institutional responsibilities in 32 EU countries, the paper aims to amplify the categorisation of policy mix characteristics developed by Rogge and Reichardt by considerations on the institutional background of policy mixes. It specifically brings into question the potential impact of different institutional settings on the consistency and coherence of approaches in this evolving policy field. Resource efficiency is an eminently cross-cutting policy concept and a specific interesting unit of analysis due to the observable heterogeneity of implementation approaches. However, it is still mainly disconnected from energy issues and, at the same time, EU policy has shifted to the circular economy approach, indicating further need for streamlining with the resource efficiency approach. The paper stresses the need to include institutional and multi-level governance issues for policy design and the development of policy mixes, especially in the context of the now refocused resource efficiency agenda to the transition to a circular economy.
The need for a transition towards a circular economy (CE) is evident, as the current economic model is based on the exploitation of far more resources than the planet can replenish sustainably. A significant part of this economic transition is the inception of new, CE-oriented startups and business activities. While business model frameworks (BMF), such as the Business Model Canvas (BMC), were at the center of discussions about structuring business ideas in the beginning of the millennium, the conversation must now shift towards circular BMFs (CBMF). This paper follows the Design Research Methodology (DRM) for an empirical approach to devising a novel CBMF, including expert interviews as well as a first application of the framework with a startup. Throughout this process, a new and innovative tool called Circular Business Framework (CBF) was created and tested based on CE principles.