Refine
Year of Publication
Document Type
- Report (86)
- Contribution to Periodical (44)
- Peer-Reviewed Article (31)
- Working Paper (21)
- Part of a Book (16)
- Conference Object (4)
- Doctoral Thesis (3)
- Book (1)
- Master Thesis (1)
Division
- Kreislaufwirtschaft (207) (remove)
The rising popularity and strong increase in the number of electric bicycles make it necessary to consider the built-in resources as well as possible treatments after the use phase. The time lag between the purchase and the occurrence of relevant defects suggests significant increases in defective components. Especially the great dynamics of the market due to regular innovations, product renewals, and the lack of spare parts availability for older models make the long-term use by customers much more difficult than for conventional bicycles. Therefore, it is necessary to analyze circular business models for the electric bicycle market. In this way, the required structures for a sustainable electric bicycle industry can be created so that valuable materials do not go into disposal but undergo a new use phase. Based on the results of "AddRE-Mo-Value Preservation Scenarios for Urban Electromobility of Persons and Loads through Additive Manufacturing and Remanufacturing," a research project funded by the German Federal Ministry of Education and Research, this paper addresses four circular business models, two sales models, and two service models. The guiding research interest of this paper is the combination of remanufacturing and additive manufacturing from a business model perspective, analyzing the extent to which additive remanufacturing can be considered a solution for electric bicycles' circularity. After describing the approach and methods used to develop these four circular business models the business models are described and analyzed using the Business Model Canvas. Based on this analysis, it is shown that the combination of remanufacturing and additive manufacturing can be applied to the electric bicycle market and be integrated into both sales and service models. The description of these business models will help managers design viable business models in the context of sustainable electric bicycles. It also shows that the individual partners within the value chain must collaborate more closely. In the electric bicycle industry, a single company will probably not be able to close the product cycle completely. Further research is needed to develop concepts of the business models and examine their practical feasibility in technical and organizational operations to achieve a circular economy.
Der Regionalverband Ruhr (RVR) legte nach 2017 zum zweiten Mal seinen "Bericht zur Lage der Umwelt in der Metropole Ruhr" vor. Die aktuelle Analyse, die das Wuppertal Institut erstellte, beschreibt die Umwelt- und Lebenssituation im Ruhrgebiet anhand von 20 ausgewählten Indikatoren. Das Fazit der Wissenschaftlerinnen und Wissenschaftler: Es wurde bereits viel erreicht, jedoch nehmen der globale Klimawandel und seine Auswirkungen exponentiell an Tempo zu und betreffen alle Bereiche des menschlichen Lebens. Extreme Trockenperioden, Hitzewellen oder anhaltende Starkregenereignisse mit Überflutungen in bisher nicht gekannten Ausmaßen stellen auch das Ruhrgebiet vor neue und akute Herausforderungen.
Mit dem Ziel, das Kunststoffrecycling weiter zu steigern, wurden in diesem Vorhaben die Verfahren und Prozesse der werkstofflichen Verwertung von Kunststoffabfällen in den Blick genommen - von der Sortierung über die Aufbereitung bis hin zu einem erneuten Einsatz in der Produktion. Ausgehend von der Beschreibung des Standes der Technik wurden mögliche, innovative technische Optimierungspotenziale identifiziert und dargestellt, die zur Verbesserung der Rezyklatqualitäten und ihren Einsatzmöglichkeiten in Neuprodukten beitragen können. Für eine Bewertung der Umweltwirkungen der technischen Innovationen im Vergleich zum Stand wurden ökobilanzielle Berechnungen vorgenommen.
In dieser Studie werden detailliert dargestellt: die Verwendung von Kunststoffprodukten und Möglichkeiten des Rezyklateinsatzes im Baubereich, verwendete Kunststoffmengen, Rücknahmesysteme, Verwertungstechniken, aktueller Rezyklateneinsatz und Bauproduktverpackungen aus Kunststoff. Potentiale zur Steigerung des hochwertigen Rezyklateinsatzes wurden identifiziert und bestehende Hürden und Handlungsoptionen für Politik und Wirtschaft dargestellt. Aktueller Rezyklateinsatz sowie technische und mengenmäßige Potentiale sind stark abhängig vom Einsatzbereich der Kunststoffe. Die größten Hürden für einen Rezyklateinsatz sind dabei Produktlebensdauer, Rückbaufähigkeit und technische Anforderungen.
A main goal of this study - which also functions as deliverable 210078-D07 of the Circular Economy Beacons (CEB) project - is to evaluate currently available frameworks that measure and operationalise Circular Economy (CE), with a particular focus on the urban context. The regional focus lies on the Western Balkan region, which is at the centre of the project. Such "Urban Circularity Hotspot Frameworks" (UCHF) aim at providing decision support for policy makers, companies, citizens etc. regarding the transition to CE within cities. Based on the analysis of different frameworks, suggestions are derived regarding UCHF suitable for the specific characteristics of Western Balkan municipalities, i.e. a Circular Economy Beacons Urban Circularity Hotspot Framework (CEB-UCHF) ready for short-term implementation.
Seitdem Einweg-Plastikartikel wie Kunststofftüten und Strohhalme verboten wurden, sind Straßen und Strände sauberer geworden. Zudem wurde auch die öffentliche Diskussion über nachhaltigen Konsum intensiviert. Die Gesamtmenge an Kunststoff-Abfällen ließ sich mit "Plastikverboten" hingegen nicht signifikant reduzieren. Zu diesem Ergebnis kommt der vorliegende Polyproblem-Report der gemeinnützigen Röchling Stiftung und des Beratungshauses Wider Sense in Zusammenarbeit mit dem Wuppertal Institut. Die Autor*innen haben die Wirkung staatlicher Verbote von Einweg-Plastikprodukten unter die Lupe genommen und die Erfahrungen aus Deutschland, Kenia und Kalifornien analysiert.
The transition to a greener and more circular economy has been a European policy priority for several years. The Circular Economy Action Plan of 2020 underlines the ambition. The following EEA initiatives are meant to support the transition process:
- Bellagio Process on circular economy monitoring principles (EPA network);
- Enhancement of EEA indicators on circular economy (ETC/WMGE);
- Explorative work on novel data streams (FWC);
- Co-creation work - knowledge sharing of monitoring experience (ETC/Eionet).
The scope of the present task was to report on the co-creation process that was undertaken at the end of 2020. The co-creation process was organised to identify:
(i) best practices on monitoring strategies, data sources and target setting; and
(ii) areas of circularity measuring and monitoring that remain challenging and require additional investment.
The co-creation process partially built on the work done during the Bellagio Process/Initiative which was run in parallel. This ETC report presents and documents the evidence gathered throughout the co- creation process as well as providing a retrospective analysis of the links to the Bellagio Principles.
Ohne die Transformation unserer Wirtschaft in eine nachhaltige Kreislaufwirtschaft werden wir die planetaren Grenzen weiter überschreiten, die Klimaziele verfehlen und die Ökosysteme schädigen. Deutschlands Politik hat sich in einem Flickenteppich aus Strategien und Gesetzen verfangen, aus dem eine echte Kreislaufwirtschaft nicht in der notwendigen Geschwindigkeit hervorgehen kann. Der Versuch, einer verschwenderischen Wirtschaft allein mit den Mitteln des Abfallrechts beizukommen, kann nicht glücken.
Nötig ist vielmehr eine ganzheitliche, übergeordnete deutsche Kreislaufwirtschaftsstrategie mit ambitionierten nationalen Zielen. Das vorliegende Papier will zeigen, was sich konkret verändern muss und welche Hebel es braucht, um die Kreislaufwirtschaft signifikant voranzubringen.
Es ist Zeit zu handeln. Innovative Ideen, Konzepte und Forderungen liegen auf dem Tisch. Sie machen es möglich, Deutschland auf eine zirkuläre Zukunft auszurichten, Rohstoffe und Materialien konsequent im Kreislauf zu führen und der Wirtschaft Planungssicherheit zu geben. Kreislaufwirtschaft ist Zukunftswirtschaft. Sie muss Kernthema einer neuen Regierung werden.