Refine
Year of Publication
Document Type
- Conference Object (351) (remove)
Language
- English (351) (remove)
The ecological challenges of this decade have been clearly identified. The pressure of problems is increasing drastically; progress in climate protection or the preservation of biodiversity is insufficient. Little time is left to act. In consequence, we can only achieve and permanently secure social and environmental prosperity through far-reaching changes in economy and society.
As a socio-technical innovation, digitalisation can realise its full ecological potential above all where it helps to profoundly change today's lifestyles, consumption patterns, and economic practices with a clear commitment to sustainability. As the most urgent design task of the 21st century, it is important to put digitalisation's enormous creative power at the service of the great transformation. The "great transformation" refers to the comprehensive restructuring of technology, the economy, and society in order to deal with the social and ecological challenges of the 21st century. This is a task for state action in terms of both regulatory policy orientation and facilitating collective processes of change - new tasks call for new governance.
A digital-ecological statecraft is the indispensable prerequisite for effective state action to shape the social-ecological digital transformation. Using the example of the platform economy, we explore challenges, starting points, and (policy) measures.
Enhancing evaluations of future energy-related product policies with the digital product passport
(2022)
The EU Horizon 2020 project HiEff-BioPower (grant agreement No 727330, duration: 10/2016 - 09/2021) aimed at the development of a new, innovative, fuel flexible and highly efficient biomass CHP technology for a capacity range of 1 to 10 MW total energy output, suitable e.g. for on-site generation at larger residential apartment buildings or local heat grids. The new technology shall define a new milestone in terms of CHP efficiency and contribute to a sustainable energy supply based on renewable energies using otherwise unused residual biomass. It consists of a fuel-flexible updraft gasification technology with ultra-low particulate matter emissions, an integrated gas cleaning system and a solid oxide fuel cell (SOFC). The technology shall be applicable for a wide fuel spectrum for residual biomass (wood pellets, wood chips or selected agricultural fuels like agro-pellets) and achieve high gross electric (40%) and overall (90%) efficiencies as well as almost zero gaseous and particulate matter (PM) emissions (close or below the level of detection) as non-energy benefits. At the end of the project, final technology data has become available, as well as techno-economic analyses and market studies. Based on this data, this paper presents final results from the environmental impact assessment of the new HiEff-BioPower technology.
To achieve the EU's energy efficiency targets, both the rate of building energy renovation and its depth, i.e., the amount of energy savings post renovation need to be improved. Energy Performance Certificates (EPCs) are key to make energy efficiency measures transparent for the building market and to promote the energy efficiency of buildings through renovation. The revision of the Energy Performance of Buildings Directive (EPBD) is seen as a pre-condition to meet the Renovation Wave objectives and to reach a highly energy efficient and decarbonized building stock by 2050. One focus of the current revision of the EPBD is therefore the improvement of EPCs. QualDeEPC - High-quality Energy Performance Assessment and Certification in Europe Accelerating Deep Energy Renovation, funded under the EU's Horizon 2020 programme, is a project that aims to improve EPCs. Following an EU-wide review of existing EPC schemes, and extensive stakeholder discussions in the seven partner countries, QualDeEPC found that EPCs and EPC schemes need to enhance particularly in the following three ways:
1. Establish a close link between EPCs and deep energy renovation
2. Improve the quality of EPC schemes, i.e., both the EPCs and their data, and the processes of assessment, certification, verification
3. Improve cross-EU convergence of EPC schemes.
The Fit for 55 package stipulates a fair, competitive and green transition by 2030 and beyond. As part of this, increasing attention is given to the decarbonisation of the building stock: only 1 % of buildings in Europe are retrofitted each year, a number which must double if the EU is to meet its 2050 targets. Significant energy efficiency investments are needed, whilst the planned expansion of the EU-ETS to the building sector in 2026 will likely pass the carbon cost onto the consumer. This will increase the cost burden placed on low-income households, exacerbating energy poverty, if these two strategies are not counterbalanced by adequate policies and support mechanisms.
The European Private Rented Sector (PRS) is often side-lined by policymakers when implementing energy efficiency policies to tackle energy poverty. As many as 1 in 10 Europeans spend 40 % or more of their income on housing costs, with those in the PRS struggling with energy-related problems, such as poor energy efficiency and maintenance, to a much greater degree than the general population. Understanding these challenges and creating targeted policies is of critical scientific and policy importance.
To date, a pan-European policy on how to address energy poverty and energy efficiency improvements in the PRS is lacking; current European Union instruments to address such issues (including the Fit for 55, and the Clean Energy Package that preceded it) lack a dedicated approach towards the complex structural issues embedded in the European PRS. What is more, there is a limited understanding of the character of energy poverty in such residential dwellings, as well as policies to address energy injustices. We therefore examine current and historical disparities in energy poverty between the EU's PRS tenants and the general population by analysing a variety of quantitative indicators which reflect different dimensions of energy poverty. We then take stock of the policy landscape, identifying energy efficiency policies tailored to alleviate energy poverty in the PRS and common challenges. We subsequently interrogate possible solutions, drawing on existing good practice policies. In so doing, we aim to reduce the sector's political invisibility by addressing the lack of disaggregated, targeted data and dismantling barriers that currently lead to the PRS being disproportionately affected by energy poverty.
More and more cities are setting themselves ambitious climate protection targets, including CO2 neutrality. Schools are important institutions of cities and therefore they have to play a central role in achieving this goal.
With the investment backlog building up and pressure from the Friday for Future movement increasing, the Wuppertal Institute and Büro Ö-quadrat have initiated the project Schools4Future, aiming to support secondary schools to become climate-neutral. In cooperation with secondary school students and teachers, the project team evaluated the existing situation of the participating schools and developed GHG-balances and feasible climate protection concepts. For this purpose, an Excel-based carbon footprint (CF) assessment tool for schools has been developed which is freely available. The tool covers all important emission areas, including heating energy, electricity use, travel to and from schools, school trips, the school canteen and paper consumption. The students were found capable to conduct the CF assessment with the guidance of the teacher, information materials and support of the researchers. So far, six pilot schools have completed their CF assessment with emissions ranging between 335 and 944 kg CO2 per person.
In this paper we present the tool and compare the CF assessment of some schools. We further elaborate on how the tool and project has increased the climate awareness and self-efficacy of students and even stimulated measures by the school board.
The EU aims to become the first climate neutral continent. To achieve this goal, the industry sector needs to reduce its GHG emissions to net zero or at least close to net zero. This is a particularly challenging task due to the high energy demand especially of primary materials production and the little potential to reduce this energy intensity when switching to other production processes based on electricity or hydrogen. In order to identify robust strategies for achieving a net-zero-compatible industry sector, the paper at hand analyses the transformation of the industry sector as described by a number of recent climate neutrality scenarios for Germany. Apart from overall industry, a focus is set on the sectors of steel, chemicals and cement. The analysed scenarios show very deep GHG emission reductions in industry and they appear to be techno-economically feasible by the mid of the century, without relying on offsets or on shifts from domestic production to imports. The scenarios agree on a suite of core strategies to achieve this, such as direct and indirect electrification, energy efficiency and recycling as well as new technological routes in steel making and cement. The scenarios differ, however, regarding the future mix of electricity, hydrogen and biomass and regarding the future relevance of domestic production of basic chemicals.
Variations in quantity, quality and time availability of input materials pose a major risk to circular supply chains (CSC) and require new models for creating and evaluating adaptive and resilient CSC in the circular economy (CE). This can be achieved through consistent modelling of the overarching relationship between resource input- and output streams, without neglecting the associated risks.
The model proposed below consists of five components based on five resilience requirements for supply-chains (SCs). It provides a data-based recommended course of action for managers with a low entry-barrier. It consists of a CSC visualization, safety stock calculation, risk monitoring for each SC node, reporting logic, and a measurement catalogue. The inspiration for this model came from an innovative case study ("Zirkelmesser") in the metal processing industry, where secondary products and materials are used to produce new products. Here, the problem of maintaining the resource supply arose and led to resilience issues. The mentioned case study serves as an application example for the model application and contributes to making emerging circular supply chains predictable and more controllable, thus increasing their resilience.
An important instrument to enhance the market uptake of energy-efficient new buildings and the energy-efficient renovation of existing buildings in the European Union (EU) are the Energy Performance Certificates (EPC). However, their implementation and use has varied between EU Member States. The European Commission has therefore provided funding to a number of Horizon2020 projects to develop next-generation EPC schemes.
One of these is the QualDeEPC project, aiming to both improve quality and cross-EU convergence of EPC schemes, and particularly the link between EPCs and deep renovation. The objective of the project is to improve the practical implementation of the assessment, issuance, design, and use of EPCs as well as their renovation recommendations, in the participating countries and beyond.
This paper presents the policy proposals and concepts for tools that the QualDeEPC project has developed as priorities for enhanced EPC schemes:
- Improving the recommendations for renovation, which are provided on the EPCs, towards deep energy renovation
- An online tool for comparing EPC recommendations to deep energy renovation recommendations
- Creating Deep Renovation Network Platforms (One-stop Shops plus networking and joint communication of supply-side actors)
- Regular mandatory EPC assessor training (on assessment and renovation recommendations) required for certification/accreditation and registry
- Achieving a high user-friendliness of the EPC
- Voluntary/mandatory advertising guidelines for EPCs
- Improving compliance with the mandatory use of EPCs in real estate advertisements
The paper will focus on the aspects related to improving the impact of EPCs for stimulating deep renovation. It will also present lessons learnt from the discussion with stakeholders at national and European workshops and from the testing of the proposals and tools in around 100 buildings, as well as from the first steps of their country-specific adaptation.
Urban development faces numerous challenges in the 21st century and a central task is the sustainable and liveable design of the city. Can the concept of a Smart City be a tool to making cities more liveable and sustainable? To find out, we chose a biographical method to analyse the steps towards a successful Smart City and to better understand the structures behind it. We combine the innovation biography method with a process model from sustainability governance research, namely Steurer's sustainability governance model and apply them to Vienna's Smart City, especially the preparation of the Vienna Smart City framework strategy (Steurer & Trattnigg, 2010). On the one hand, this article shows that a transfer of the innovation biography method to urban research can generate deeper insights on urban development processes in general. On the other hand, the approach chosen can show that Vienna integrates the sustainable urban design into the process of Smart City design. So the smart and sustainable city design, often called for in theoretical contributions, is practised in Vienna. Due to its reconstructive character, the biographical method has revealed that it is possible to govern sustainability by using Smart City as an umbrella strategy, as long as one manages it in an integrated and holistic way, recognises trends and is able to acquire and use research funds effectively and efficiently.
The knowledge gained from the new method for urban and Smart City research is twofold. Firstly, the transfer of the method previously developed in the human sciences and subsequently for organisations, institutions and products and services also works in urban research. Second, the innovation biography provides in-depth insights into the process towards the Smart City and the stakeholders involved. The use of the biographical method highlights the relevance of good governance in terms of interdisciplinary cooperation on the one hand and high political commitment on the other through the micro-level perspective and is also sensitive enough to highlight the importance of an appropriate narrative in and for the process towards the Smart City.
The unprecedented challenge of reaching carbon neutrality before mid-century and a large share of it within 2030 in order to keep under the 1.5 or 2 °C carbon budgets, requires broad and deep changes in production and consumption patterns which, together with a shift to renewables and reinforced efficiency, need to be addressed through energy sufficiency. However, inadequate representations and obstacles to characterising and identifying sufficiency potentials often lead to an underrepresentation of sufficiency in models, scenarios and policies.
One way to tackle this issue is to work on the development of sufficiency assumptions at a concrete level where various implications such as social consequences, environmental co-benefits, conditions for implementation can be discussed. This approach has been developed as the backbone of a collaborative project, gathering partners in 20 European countries at present, aiming for the integration of harmonised national scenarios into an ambitious net-zero European vision.
The approach combines a qualitative discussion on the role of energy sufficiency in a "systemic" merit order for global sustainability, and a quantitative discussion of the level of sufficiency to be set to contribute to meeting 100 % renewables supply and net-zero emissions goals by 2050 at the latest. The latter is based on the use of a dashboard, which serves as a common descriptive framework for all national scenario trajectories and their comparison, with a view to harmonising and strengthening them through an iterative process.
A set of key sufficiency-related indicators have been selected to be included in the dashboard, while various interrelated infrastructural, economic, environmental, social or legal factors or drivers have been identified and mapped. This paves the way for strengthening assumptions through the elaboration of "sufficiency corridors" defining a convergent, acceptable and sustainable level of energy services in Europe. The process will eventually inform the potential for sufficiency policies through a better identification of leverages, impacts and co-benefits.
On the pathway to climate neutrality, EU member states are obliged to submit national energy and climate plans (NECPs) with planned policies and measures for decarbonization until 2030 and long-term strategies (LTSs) for further decarbonization until 2050. We analysed the 27 NECPs and 15 LTSs submitted by October 2020 using an interrater method. This paper focuses on energy sufficiency policies and measures in the transport sector.
We found a total of 236 sufficiency policy measures with more than half of them (53 %) in the transport/mobility sector. Additionally, we found 41 measures that address two or more sectors (cross-sectoral measures). From the explicit sufficiency measures within the transport sector, 82 % aim at modal shift. A reduction of transport volumes is much less addressed. Countries plan to use mainly fiscal and economic instruments. Those are in many cases investments in infrastructure of low-carbon transport modes and taxation instruments. Plans on decarbonisation measures are also frequently mentioned. The majority of cross-sectoral measures are carbon taxes or tax reforms, also economic instruments.
On the one hand it is encouraging that Member States strongly emphasize the transport sector in their NECPs and LTSs - at least quantitatively and concerning sufficiency measures - because this sector has been the worst-performing in climate mitigation so far. On the other hand, the measures described seem not sufficient to reach ambitious climate targets, and we doubt that the presented set of policy instruments will get the transport sector on track to mitigate greenhouse gas emissions in the necessary extent.
Consumption by private households in various areas of demand - housing, mobility, nutrition, services and products - contributes to around 10 % of total emissions in Germany. Of this, higher-income households are responsible for a disproportionate share. At the same time, many households often lack the knowledge, time, or motivation to deal with their own energy-relevant and climate-impacting behaviours. In this context, energy advice services play an important role for raising awareness, activating consumers and imparting knowledge about available options for action. However, conventional energy advice services are mostly limited to the topics of building and appliance energy efficiency - especially for middle- and high-income households - without considering private consumption behaviour and the related social practices as a whole. In practice, there has been little differentiation to date in addressing target groups in a way that takes into account different lifestyles and realities and the underlying values and motivations in a pluralistic society. The present paper presents a methodological approach to develop targeted energy advice approaches in urban environments that are oriented towards the motivations of different types of households with medium and high incomes. It proposes a three-step approach consisting of 1) a microdata-based population analysis to identify and categorize target subgroups, 2) an inventory of existing advice offers with regard to their coverage and approach and 3) a gap analysis based on the results of the preceding steps. Applied to a large city in Germany, the analysis finds that gaps are rarely found with regard to communicated facts but rather the way in which information is conveyed. Accordingly, recommendations relate to more effectively use windows of opportunity and framing of measures to match target group motivations.
In current German debates on sustainable urbanisation and urbanism, new urban actors reviving buildings, brownfields or whole neighbourhoods are discussed as potential drivers of urban transformation towards sustainability as well as potential co-producers for conventional actors in urban development and planning. These actor's projects can be understood as spatially confined niches for experimentation with (built) urban space itself. Building upon the concepts of niche entrepreneurship (Pesch et al., 2017) and the framework of strategic action field theory (Fligstein & McAdam, 2011; 2015), we ask how these actors secure support for their projects and how these projects in turn are altered in this process. Based upon a case study from Wuppertal, Germany, we show that in struggling for support of powerful actors, these actors often have to significantly compromise, and that these compromises can be understood as contextualisation in the project's spatial and institutional environment.
To what extent can designers direct their professional practices towards serving the common good? Design constitutes itself anew with every project. Each project is both conditioned and made possible through a unique constellation of actors, timeframes, objectives, skills, etc. which arise from both social values and political agendas. We discuss the different approaches of two selected design projects by the authors, and the respective strategies and methods. While the designers' ambition in both projects was certainly to change an existing situation into a preferred one - the first by the means of interactive user engagement, the second through the idea of semi-finished product semantics - we emphasize on the challenges and ambiguities arising from the evolutionary process of design, aiming at the common good. Eventually we conclude that design processes can serve as a tool to debate rather than create the common good.
Industrialized countries have committed to providing "new and additional" funding to developing countries for climate change mitigation and adaptation. However, lack of a common definition of "new and additional" undermines the climate process. This article aims to contribute to the discussion on the principle of additionality by assessing possible definitions. The article first contextualizes the guiding principles that led to the endorsement of "new and additional" finance within the history of international climate negotiations. Second, we survey definitions of "new and additional" put forward by industrialized countries as well as further proposed definitions put forward by scholars. Third, we assess the respective strengths and weaknesses of these definitions.
Our analysis shows that there is no singular formula that would resolve the problem of how to define additionality. Definitions that would be politically acceptable to developed countries are subject to gaming while definitions that are technically robust are politically difficult. We conclude that a combination of using innovative sources and defining specific future levels of development assistance ex ante may offer the best prospects for resolving the climate finance conundrum.
For some time, 3D printing has been a major buzzword of innovation in industrial production. It was considered a game changer concerning the way industrial goods are produced. There were early expectations that it might reduce the material, energy and transport intensity of value chains. However for quite a while, the main real world applications of additive manufacturing (AM) have been some rapid prototyping and the home-based production of toys made from plastics. On this limited basis, any hypotheses regarding likely impacts on industrial energy efficiency appeared to be premature. Notwithstanding the stark contrast between early hype and practical use, the diffusion of AM has evolved to an extent that at least for some applications allows for a preliminary assessment of its likely implications for energy efficiency.
Unlike many cross-cutting energy efficiency technologies, energy use of AM may vary substantially depending on industry considered and material used for processing. Moreover, AM may have much greater repercussions on other stages of value chains than conventional cross-cutting energy efficiency technologies. In case of AM with metals the following potential determinants of energy efficiency come to mind:
- A reduction of material required per unit of product and used during processing;
- Changes in the total number and spatial allocation of certain stages of the value chain; and
- End-use energy efficiency of final products.
At the same time, these various streams of impact on energy efficiency may be important drivers for the diffusion of AM with metals. This contribution takes stock of AM with metals concerning applications and processes used as well as early evidence on impacts on energy efficiency and combine this into a systematic overview. It builds on relevant literature and a case study on Wire Arc Additive Manufacturing performed within the REINVENT project.
The reduction of greenhouse gas (GHG) emissions by energyintensive industries to a net zero level is a very ambitious and complex but still feasible challenge, as recent studies show for the EU level. "Industrial Transformation 2050" by Material Economics (2019) is of particular relevance, as it shows how GHG-neutrality can be achieved in Europe for the sectors chemicals (plastics and ammonia), steel and cement, based on three main decarbonisation strategies. The study determines the resulting total demands for renewable electricity, hydrogen and for the capture and storage of CO2 (CCS). However, it analyses neither the regional demand patterns that are essential for the required infrastructure nor the needed infrastructure itself.
Against this background the present paper determines the regional distribution of the resulting additional demands for electricity, hydrogen and CCS in Europe in the case that the two most energy and CCS intensive decarbonisation strategies of the study above will be realised for the existing industry structure. It explores the future infrastructure needs and identifies and qualitatively assesses different infrastructure solutions for the largest industrial cluster in Europe, i.e. the triangle between Antwerp, Rotterdam and Rhine-Ruhr. In addition, the two industrial regions of Southern France and Poland are also roughly examined.
The paper shows that the increase in demand resulting from a green transformation of industry will require substantial adaptation and expansion of existing infrastructures. These have not yet been the subject of infrastructure planning. In particular, the strong regional concentration of additional industrial demand in clusters (hot spots) must be taken into account. Due to their distance from the high-yield but remote renewable power generation potentials (sweet spots), these clusters further increase the infrastructural challenges. This is also true for the more dispersed cement production sites in relation to the remote CO2 storage facilities. The existing infrastructure plans should therefore be immediately expanded to include decarbonisation strategies of the industrial sector.
Financial institutions play a crucial role in achieving the 2015 Paris Climate Agreement. They can manage capital flows for financing the required transformation towards a decarbonized industry. Currently established policy programs and regulations at European and national level increasingly address financial institutions to make their climate warming impact measurable and transparent. However, required science-based assessment methods have not been sufficiently developed so far.
This paper discusses methodological opportunities and challenges for measuring carbon footprints of financial institutions. Based on a scientific case study undertaken with the German GLS Bank, the authors introduce an innovative method for quantifying greenhouse gas emissions from a bank's asset with a focus on loans. The authors apply an input/output database to calculate greenhouse gas (GHG) intensities and allocate them with bank's loans and investments.
Moreover, the paper provides insights of calculating avoided GHG emissions initiated by a bank's investment and loans. In conclusion, a high degree of consistent and standardized assessment methods and guidelines need to be developed and applied to promote comparability and transparency.
The paper describes quantitative scenarios on a possible evolution of the EU petrochemical industry towards climate neutrality. This industry will be one of the remaining sectors in a climate neutral economy still handling hydrocarbon material to manufacture polymers. Concepts of a climate neutral chemical industry stress the need to consider the potential end-of-life emissions of polymers produced from fossil feedstock and draft the vision of using renewable electricity to produce hydrogen and to use renewable (hydro)carbon feedstock. The latter could be biomass, CO2 from the air or recycled feedstock from plastic waste streams.
The cost-optimization model used to develop the scenarios describes at which sites investments of industry in the production stock could take place in the future. Around 50 types of products, the related production processes and the respective sites have been collected in a database. The processes included cover the production chain from platform chemicals via intermediates to polymers. Pipelines allowing for efficient exchange of feedstock and platform chemicals between sites are taken into account as well. The model draws on this data to simulate capacity change at individual plants as well as plant utilization. Thus, a future European production network for petrochemicals with flows between the different sites and steps of the value chain can be sketched.
The scenarios described in this paper reveal how an electrification strategy could be implemented by European industry over time with minimized societal costs. Today's existing assets as well as geographical variance of energy supply and the development of demand for different plastic sorts are the major model drivers.
Finally, implications for the chemical industry, the energy system and national or regional governments are discussed.
Technological innovations in energy-intensive industries (EIIs) have traditionally emerged within the boundaries of a specific sector. Now that these industries are facing the challenges of deep decarbonisation and a significant reduction in greenhouse gas (GHG) emissions is expected to be achieved across sectors, cross-industry collaboration is becoming increasingly relevant for low-carbon innovation.
Accessing knowledge and other resources from other industrial sectors as well as co-developing innovative concepts around industrial symbiosis can be mutually beneficial in the search for fossil-free feedstocks and emissions reductions. In order to harness the potential of this type of innovation, it is important to understand not only the technical innovations themselves, but in particular the non-technical influencing factors that can drive the successful implementation of cross-industry collaborative innovation projects.
The scientific state of the art does not provide much insight into this particular area of research. Therefore, this paper builds on three separate strands of innovation theory (cross-industry innovation, low-carbon innovation and innovation in EIIs) and takes an explorative case-study approach to identify key influencing factors for cross-industry collaboration for low-carbon innovation in EIIs.
For this purpose, a broad empirical database built within the European joint research project REINVENT is analysed. The results from this project provide deep insights into the dynamics of low-carbon innovation projects of selected EIIs. Furthermore, the paper draws on insights from the research project SCI4Climate.NRW. This project serves as the scientific competence centre for IN4Climate.NRW, a unique initiative formed by politicians, industry and science to promote, among other activities, cross-industry collaboration for the implementation of a climate-neutral industry in the German federal state of North Rhine-Westphalia (NRW). Based on the results of the case study analysis, five key influencing factors are identified that drive the implementation of cross-industry collaboration for low-carbon innovation in EIIs: Cross-industry innovation projects benefit from institutionalised cross-industry exchange and professional project management and coordination. Identifying opportunities for regional integration as well as the mitigation of financial risk can also foster collaboration. Lastly, clear political framework conditions across industrial sectors are a key driver.
This paper analyses and compares industry sector transformation strategies as envisioned in recent German, European and global deep decarbonisation scenarios.
The first part of the paper identifies and categorises ten key strategies for deep emission reductions in the industry sector. These ten key strategies are energy efficiency, direct electrification, use of climateneutral hydrogen and/or synthetic fuels, use of biomass, use of CCS, use of CCU, increases in material efficiency, circular economy, material substitution and end-use demand reductions. The second part of the paper presents a meta-analysis of selected scenarios, focusing on the question of which scenario relies to what extent on the respective mitigation strategies.
The key findings of the meta-analysis are discussed, with an emphasis on identifying those strategies that are commonly pursued in all or the vast majority of the scenarios and those strategies that are only pursued in a limited number of the scenarios. Possible reasons for differences in the choice of strategies are investigated.
The paper concludes by deriving key insights from the analysis, including identifying the main uncertainties that are still apparent with regard to the future steps necessary to achieve deep emission reductions in the industry sector and how future research can address these uncertainties.
Comprehensive framework on asset management of transportation networks and resilience planning
(2018)
The concept of sufficiency - reducing energy uses beyond technical efficiency - is far-reaching and requires a reflection on human needs, energy services, urban structures, social norms, and the role of policies to support the shift towards lower-energy societies. In recent years, a growing body of literature has been published on energy sufficiency in various disciplines. However, there has been limited exchanges and cooperation among researchers so far, hindering the visibility and impact of this research. This paper presents an assessment of where sufficiency research stands, especially in the perspective of policy-making. It is the first overview paper issued in the context of the newly-founded ENOUGH network - International network for sufficiency research & policy, established in 2017. In the first part, we provide a condensed literature review on energy sufficiency, based on dozens of recent references collected through the network. Through four main themes (the nature of sufficiency, the challenges of modelling it, the barriers to its diffusion, and the approaches to foster it), we summarise the key issues and approaches. We then present what the scholars themselves see as the priorities for future research, promising sufficiency policy options, and key barriers that research should help overcome. We collected their views through a questionnaire completed by more than 40 knowledgeable authors and experts from various disciplines. We finally build on the previous parts to draw some recommendations on how sufficiency research could increase its impact, notably in relation to policy-making.
Reaching the climate goals for the building sector requires to improve insulation and to increase air tightness of buildings in order to minimize heat loss. To achieve these goals and to prevent risks to the health of occupants and damages to the building fabric due to insufficient removal of pollutants and humidity, broad implementation of Mechanical Ventilation and Heat Recovery (MVHR) systems is crucial.
Comparable and up to date figures on the market penetration of MVHR systems across the EU are hardly available. However, figures point to only a small share of residential buildings being currently equipped with such systems (cf. Riviere et al. 2009). For the German building stock the figure is estimated to be below 5% (Händel 2011). The paper presents insights into the reasons for the slow diffusion of HRV technologies in the German building stock. It builds on the results of a recently completed research project whose central aim was to identify actor-specific and structural barriers for the diffusion of efficient ventilation systems in apartment buildings and to examine how these barriers can be addressed.
The analysis is based on 40 semi-structured expert interviews with energy consultants, HVAC craftsmen, and housing companies, as well as guided in-depth interviews with private owners of apartment buildings or apartments that were evaluated by means of qualitative content analysis. Based on the collected data, seven barrier categories were identified, each containing a range of single barriers for the diffusion of efficient ventilation systems within the residential building stock.
Results of the analysis were quantitatively validated by means of online surveys and a household survey among 1,008 households. The paper points out interdependencies within the chain of effects leading up to the investment decision of building owners. Furthermore, based on good practice examples identified within the data collection process, it proposes different measures to address these barriers.
In 2016, the European Commission presented the Clean Energy for all Europeans Package , comprising legislative proposals to facilitate the clean energy transition within the EU, such as the revised EPBD 2010/31/EU and EED 2012/27/EU.Besides putting energy efficiency first and achieving global leadership in renewable energy, a third goal of the package was to provide a "fair deal to consumers" with "no one left behind"., While in some Member States the issue of energy poverty already was on the political agenda, enabling affordable access to basic energy services for all households and thus reducing energy poverty is now an explicit policy target of the revised EU Directives.
In order to assess and monitor the extent of the issue across the EU and address it by suitable measures, the concept of energy poverty needs to be defined, operationalised and measured. The paper aims to investigate the role of energy poverty indicators for policy making. To do so, it provides an overview on existing measurement approaches.Furthermore, the paper presents the development and current state of energy poverty across the EU using a set of four complementary indicators used by the EU Energy Poverty Observatory. These consensual and expenditure-based indicators are calculated using data from the EU Survey on Income and Living Conditions and the Household Budget Survey.
In addition, the paper highlights peculiarities of results on the different indicators, describes persisting issues with regard to their calculation and interpretation against the background of the underlying data base.
Based on the results of this analysis, further necessities of data collection and research are pointed out.
Improvements in energy efficiency have numerous impacts additional to energy and greenhouse gas savings. This paper presents key findings and policy recommendations of the COMBI project ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe").
This project aimed at quantifying the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in 2030. It covered the most relevant technical energy efficiency improvement actions in buildings, transport and industry.
Quantified impacts include reduced air pollution (and its effects on human health, eco-systems), improved social welfare (health, productivity), saved biotic and abiotic resources, effects on the energy system and energy security, and the economy (employment, GDP, public budgets and energy/EU-ETS prices). The paper shows that a more ambitious energy efficiency policy in Europe would lead to substantial impacts: overall, in 2030 alone, monetized multiple impacts (MI) would amount to 61 bn Euros per year in 2030, i.e. corresponding to approx. 50% of energy cost savings (131 bn Euros).
Consequently, the conservative CBA approach of COMBI yields that including MI quantifications to energy efficiency impact assessments would increase the benefit side by at least 50-70%. As this analysis excludes numerous impacts that could either not be quantified or monetized or where any double-counting potential exists, actual benefits may be much larger.
Based on these findings, the paper formulates several recommendations for EU policy making:
(1) the inclusion of MI into the assessment of policy instruments and scenarios,
(2) the need of reliable MI quantifications for policy design and target setting,
(3) the use of MI for encouraging inter-departmental and cross-sectoral cooperation in policy making to pursue common goals, and
(4) the importance of MI evaluations for their communication and promotion to decision-makers, stakeholders, investors and the general public.
What role do transaction costs play in energy efficiency improvements and how can they be reduced?
(2019)
Ex-ante policy evaluation requires a detailed understanding of how the subjects addressed by the policy react to its implementation. In the context of energy efficiency, policy measures typically aim at influencing investment decisions towards more efficient options.
As has been discussed widely in the context of the "energy efficiency gap", investments in energy efficiency improvements are frequently not conducted even though they seem cost-effective from a simple cost-benefit perspective, where transaction costs have been identified as one important barrier.
While transaction costs have been discussed widely from a conceptional perspective, empirical studies quantifying transaction costs and measures to reduce them are rare. This paper presents approaches, results and insights from a recently completed research project funded by the German Federal Energy Efficiency Center (BfEE), addressing transaction costs in various energy efficiency measures and the role of energy efficiency services to overcome the barrier.
We analyse a set of 11 energy efficiency investments covering private households, public institutions and the industry sector. We gather data on direct investment costs and energy cost savings and provide a detailed analysis of the various barriers and transaction costs associated with the implementation. We then analyse the costs of existing energy efficiency services using data provided by the BfEE. We compare the different cost elements and analyze the potential of energy efficiency services to reduce transaction costs.
We find that the role of transaction costs differs substantially between households, public institutions and companies and that the impact of energy efficiency services on transaction costs needs to be evaluated using different methodological approaches. We conclude that while data availability on disaggregated transaction costs is a major challenge, energy services can reduce transaction costs considerably.
In spite of differences in energy policies and supply, Japan and Germany have to master similar challenges: To reorganize the energy supply system towards - in the long term - being reliable, affordable, low in risks and resource use, and climate-neutral. At the same time, the ecological modernization should maintain or even strengthen international competitiveness. To better address these challenges, a bi-national expert council has been established between the two high-tech countries in 2016 - the GJETC.
The aim of the GJETC is to show that despite different starting points, a national energy transition can be more successful, if both countries learn from their strengths and also weaknesses, to avoid the latter. If the implementation of an energy transition in the two countries is socially and economically sound and advances technology innovation and deployment, it may not only double success, but can also serve as blue prints for other countries, especially due to learning from similarities and differences. For example: Why is per capita energy consumption higher in transport in Germany, but energy intensity higher in Japan's building sector? How can variable renewable energies be integrated in an efficient energy system at lowest costs?
The Council meets twice a year, holds stakeholder dialogues and outreach events, and prepares policy papers on strategic topics of mutual interest. Four comprehensive studies, each in cooperation of a German and a Japanese research institute, have been the basis for 15 joint key recommendations during the 1st phase. The 2nd phase to 2020 will study the role of hydrogen and digitalisation for the energy transition, as well as other topics. The paper presents the findings and recommendations of the GJETC of the first phase 2016-18 as well as first results of the second phase. It also reviews the setup of the GJETC and the way it works, to assess if and how it can serve as a role model of bilateral cooperation on the energy transition.
Estimating the sufficiency potential in buildings : the space between underdimensioned and oversized
(2019)
The emission reduction potential of energy efficiency and energy supply in buildings is estimated in various energy and climate action plans, scenarios, and potential analyses. But the third pillar of sustainability - sufficiency - is neglected in most studies.The increasing demand of space per person in the residential sector is a trend in most European countries. Its implication on energy use, demand for resources like land, building material, equipment, and waste production is enormous. Next to the ecological impact, the distribution of space has social and societal effects. Thus, sufficiency policies in the building sector complementing efficiency and energy policy are needed for a sustainable development of the European building stock.
But how can a sufficiency potential in the building sector be estimated? How much space and equipment is needed for a decent living and how much is too much? The paper proposes four areas of sufficiency in buildings: space, design and construction, equipment, and use. It presents a set of indicators, a quantitative estimate of energy savings from reduced per capita floor area, and visualises the sufficiency potential in European countries in an experimental approach. The final discussion focuses on the question: What does this mean for policy making?
"400,000 new homes per year are needed in German cities." This figure has been cited repeatedly in political discussions, media, and statements of different groups for a couple of years now. Living space is needed to mitigate the (further) inordinate increase of rents in some cities and regions and to ease finding appropriate flats at affordable prices for low- and medium-income households. But how to activate investors and the real estate market?
Having the triangle of sustainability in mind with its ecologic, social and economic cornerstones the discussion - metaphorically spoken - currently pulls the three corners: Which should have the highest priority?
The economically driven most favourable solution is lowering the requirements for new buildings such as the energy performance to make building cheaper. The social perspective prefers an increase of public social housing investments regardless of efficiency standards. And the ecological side argues that a high performance is needed to reach energy and climate targets in the buildings sector.
Starting at this point of discussion, firstly, the paper reflects the assumptions behind the numbers of new homes needed against a sufficiency background.
Secondly, it presents current changes in German building policies: a new legislation for energy supply and efficiency is currently in preparation.
It discusses the potential to integrate sufficiency aspects in building policies, focussing specifically on the new regulation, financial incentives, and energy advice.
The paper analyses if and to what extent it is likely to balance the three cornerstones of sustainability by integrating sufficiency aspects into efficiency policies. Household experiences with prepayment meters are used as an example to illustrate the potential for tapping efficiency and sufficiency potentials in low-income households considering social, economic, and ecological aspects. Based on the identified (in)consistencies, thirdly, it suggests further development in German policies to make better use of synergies between the ecologic, social and economic demands on buildings.
In recent years, many energy scenario studies have proven that a power supply system based on renewable energies (RE) >90 percent is feasible. However, existing scenarios differ significantly in the composition of generation technologies. Some scenarios focus on wind energy in the northern part of Europe, others base on a large utilisation of solar technologies in the south. Apart from the generation capacities, the needed technical flexibilisation strategies such as grid extension, demand flexibilisation and energy storage are generally known and considered in many scenarios. Yet, the impact of different renewable generation strategies on the local utilisation of flexibility options needs to be further assessed. Based upon the BMBF research project RESTORE2050, analyses have been carried out that focus on these interdependencies. The results of the project show that the local utilisation of flexibilisation options depends to a great extent on the technology focus of the long-term renewable expansion strategy. This applies for the spatial flexibilisation as provided by transnational interconnection capacities, especially the ones connecting regions with a surplus of power generation (e.g. GB, Norway and Spain). Another impact of the renewable scenario is seen on the required temporal flexibilisation of electricity generation and demand. In addition, the available options will compete for high utilisation in a future energy system. The differences in the utilisation of these applications, which base on the varying shares of photovoltaic (PV) and wind energy generation, lead to the conclusion that the decision about longterm RE expansion ought to be made very soon in order to avoid inefficient flexibility pathways. Otherwise, if the future RE structure will be kept open, adequate adoption of new flexibility options will be difficult, especially in case of technologies with long lead and realisation time (e.g. new power grids and large scale energy storage devices).
Living-Lab-as-a-Service : exploring the market and sustainability offers of living labs in Germany
(2018)
There is an increasing pressure that enhanced and novel energy technologies are swiftly adopted by the market to ensure meeting the energy and climate targets. An important issue with such novel developments is their risk to be stuck in the "valley of death", i.e. that their transition to the market is delayed or unsuccessful. Publicly supported demonstration projects could help to bridge the valley of death by reducing barriers to the adoption caused by missing information and perceived risks. A challenge for technology demonstrations in the industrial context is their often high investments that are required to prove their real-world benefits. Given the magnitude of such investments, it becomes crucial that public funding focuses on the most promising demonstration proposals. Structured evaluation processes can help to facilitate the identification of promising proposals and to improve the quality and transparency of decisions. This paper deals with a corresponding multi-staged multi-criteria decision support system (DSS) suggested to the German Federal Ministry for Economic Affairs and Energy. It deals with the evaluation of demonstration proposals across three stages: The first stage represents a filtering stage to identify those proposals relevant for further considerations. The second stage comprises a multi-criteria scoring method drawing on an evaluation against nineteen criteria. The final third stage serves to critically review the need for public funding of well-scored proposals. This contribution outlines the development of the DSS and its design and thus provides insights on proposal evaluating in energy research.
Converting electricity into heat offers the opportunity to make of use large scales of renewable (surplus) energy in the long run in order to reduce shut-downs of renewable power plants and to substitute fossil fuels. Electrification seems to be also very promising for industrial heat applications, as it enables high process temperatures to be achieved in a tailor-made and efficient way and enables the utilisation of other energy sources like waste heat, geothermal or ambient heat (via heat pumps). This article analyses theoretical and technical electrification potentials of Steam Generation and Other Process Heat Generation in the following energy-intensive branches: iron & steel, non-ferrous metal, iron foundries, refineries, base chemicals, glass, cement clinker and paper industry in Germany. Literature research, expert interviews as well as own modelling were conducted to determine potentials and their implementation barriers. Based on these methods, market potential to electrify industrial steam generation was estimated. On the basis of two climate protection scenarios, the effects of both a monovalent and a hybrid industrial power-to-heat strategy were quantified with regard to greenhouse gas reduction and energy efficiency (primary energy saving). The pathway towards electrification will be reflected by criteria such as path dependency, dependency of infrastructure and system compatibility. Recommendations for research and development as well as policies are derived from the overall analysis. The article shows that electrification can be an important option to achieving high CO2-savings in the industrial heating sector in a long-term perspective. However, the scenario calculations show that electrification does not in itself guarantee reduction of greenhouse gases or savings of primary energy. To reach these goals, it is essential to further develop industrial heat pumps and to map electrification and further development of renewable energy (including infrastructure such as power networks and storage facilities) in a concerted strategy.
The German federal state of North Rhine-Westphalia (NRW) is home to important clusters of energy-intensive basic materials industries. 15% of the EU's primary steel as well as 15% of high-value base chemicals are produced here. Together with refinery fuels, cement, lime and paper production (also overrepresented in NRW) these are the most carbon-intensive production processes of the industrial metabolism. To achieve the ambitious regional and national climate goals without relocating these clusters, carbon-neutral production will have to become standard by mid-century. We develop and evaluate three conceptual long-term scenarios towards carbon-neutral industry systems for NRW for 2050 and beyond:
* a first scenario depending on carbon capture and storage or use for heavy industries (iCCS),
* a second scenario sketching the direct electrification of industrial processes (and transport) and
* a third scenario relying on the import of low carbon energies (e.g. biomass, and synthetic fuels (like methanol) for the use in industries and transport. All scenarios share the assumption that electricity generation will be CO2-neutral by 2050.
For all three scenarios energy efficiency, primary energy demand for energy services and feedstock as well as the carbon balance are quantified. We apply a spatial-explicit analysis of production sites to allow for discussion of infrastructure re-use and net investment needs. Possible symbiotic relations between sectors are also included. The robustness of the three conceptualised future carbon-neutral industry systems is then analysed using a multi-criteria approach, including e.g. energy security issues and lock-ins on the way to 2050.
The Port of Rotterdam is an important industrial cluster mainly comprising of oil refining, chemical manufacturing and power and steam generation. In 2015, the area accounted for 18 % of the Netherlands' total CO2 emissions. The Port of Rotterdam Authority is aware that the port's economy is heavily exposed to future global and EU decarbonization policies, as the bulk of its activities focuses on trading, handling, converting and using fossil fuels. Based on a study for the Port Authority, our paper explores possible pathways of how the industrial cluster can keep its strong market position in Europe and still reduce its CO2 emissions by 98 % by 2050. The "Biomass and CCS" scenario assumes that large amounts of biomass can be supplied sustainably and will be used in the port for power generation as well as for feedstock for refineries and the chemical industry. Fischer-Tropsch fuel generation plays an important role in this scenario, allowing the port to become a key cluster for the production of synthetic fuels and feedstocks in Western Europe. The "Closed Carbon Cycle" scenario assumes that renewables-based electricity will be used at the port to supply heat and hydrogen for the synthetic generation of feedstock for the chemical industry. The carbon required for the chemicals will stem from recycled waste. Technologies particularly needed in this scenario are water electrolysis and gasification or pyrolysis to capture carbon from waste, as well as technologies for the production of base chemicals from syngas. The paper compares both scenarios with regard to their respective technological choices and infrastructural changes. The scenarios’ particular opportunities and challenges are also discussed. Using possible future pathways of a major European petrochemical cluster as an example, the paper illustrates options for deep decarbonisation of energy intensive industries in the EU and beyond.
In addition to the expansion of renewable energies, the efficient use of energy is crucial in order to ensure energy transition successful. The Federal Government of Germany has therefore set itself clear objectives with the National Energy Efficiency Action Plan (NAPE), which aims to reduce the primary energy consumption in Germany - compared to 2008 levels - by 20 per cent until 2020, and by 50 per cent until 2050. In addition, greenhouse gas emissions should fall by 40 per cent compared to 1990.
To reach this goal, the German Federal Ministry of Economic Affairs and Energy (BMWi) inter alia launched the "National Top Runner Initiative (NTRI)" in January 2016. It is an important component and concerns private homes, as well as industry, retail and services.
The NTRI is intended to bring energy efficient and high-quality appliances (so called Top Runners) onto the market more quickly, thus accelerate market replacement. For this purpose, motivation, knowledge and competence in product-related energy efficiency is to be strengthened and expanded along the whole value chain - from the appliance manufacturer to the retailer and the consumer. Manufacturers are pushed to develop more efficient products and consumers get valuable information about Top-Runner products and how they can benefit. In this context, retailers are especially relevant as they act as "gatekeeper" between manufacturers and consumers. They play a key role in advancing an energy efficient production and consumption. They do not only select the products but they also have a direct contact to consumers and influence the purchase decision. In this paper, special emphasis will be put on the role of retailers and the efforts of the National Top Runner Initiative will be illustrated. Barriers and incentives to motivate this target group will be elaborated.
Renewable energy plays a key role in the sustainable pathway towards a low carbon future and, despite new supply capacities, the transformation of the energy system also requires the adoption of a method which allows for the integration of increasing amounts of renewable energy. This requires a transition to more flexible processes at an industrial level and demand side management (DSM) is one possible way of achieving this transition. Currently, increased shares of variable renewable energy can cause the electricity supply to become more volatile and result in changes to the electricity market. In order to develop a new dynamic equilibrium to balance supply and demand, sufficient flexibility in demand is required. As adequate storage systems are not available in the short to medium term, the potential for large electricity consumers to operate flexibly is an attractive, pragmatic and feasible option. Recent studies in Germany suggest that there is significant potential for DSM in so-called "energy-intensive industries". However, the figures (which fall in the approximate range of 1,250-2,750 MW positive and 400-1,300 MW negative shiftable load) should be interpreted with caution. The range of industrial processes considered are diverse and vary from plant to plant, with the result that it is difficult to provide accurate calculations of the accumulated potential for Germany or the EU as a whole. Based on extensive surveys and panel discussions with representatives from energy-intensive industries (aluminum, cement, chemicals, iron & steel, pulp & paper), which together account for approximately one third of the industrial electricity demand in Germany, our paper provides an overview of both the opportunities and the barriers faced by DSM. One of the key findings is the possible loss in energy efficiency due to DSM: in order to decrease or increase production depending on the stability needs of the electricity system, plants and processes may no longer operate at their optimum levels. The effects on downstream production must also be taken into account in order to gain a more complete understanding of the overall effects of industrial DSM.
Contemporary combined heat and power (CHP) systems are often based on fossil fuels, such as natural gas or heating oil. Thereby, small-scale cogeneration systems are intended to replace or complement traditional heating equipment in residential buildings. In addition to space heating or domestic hot water supply, electricity is generated for the own consumption of the building or to be sold to the electric power grid.
The adaptation of CHP-systems to renewable energy sources, such as solid biomass applications is challenging, because of feedstock composition and heat integration. Nevertheless, in particular smallscale CHP technologies based on biomass gasification and solid oxide fuel cells (SOFCs) offer significant potentials, also regarding important co-benefits, such as security of energy supply as well as emission reductions in terms of greenhouse gases or air pollutants. Besides emission or air quality regulations, the development of CHP technologies for clean on-site small-scale power generation is also strongly incentivised by energy efficiency policies for residential appliances, such as e.g. Ecodesign and Energy Labelling in the European Union (EU). Furthermore, solid residual biomass as renewable local energy source is best suited for decentralised operations such as micro-grids, also to reduce long-haul fuel transports. By this means such distributed energy resource technology can become an essential part of a forward-looking strategy for net zero energy or even smart plus energy buildings.
In this context, this paper presents preliminary impact assessment results and most recent environmental considerations from the EU Horizon 2020 project "FlexiFuel-SOFC" (Grant Agreement no. 641229), which aims at the development of a novel CHP system, consisting of a fuel flexible smallscale fixed-bed updraft gasifier technology, a compact gas cleaning concept and an SOFC for electricity generation. Besides sole system efficiencies, in particular resource and emission aspects of solid fuel combustion and net electricity effects need to be considered. The latter means that vastly less emission intensive gasifier-fuel cell CHP technologies cause significant less fuel related emissions than traditional heating systems, an effect which is further strengthened by avoided emissions from more emission intensive traditional grid electricity generation. As promising result, operation "net" emissions of such on-site generation installations may be virtually zero or even negative. Additionally, this paper scopes central regulatory instruments for small-scale CHP systems in the EU to discuss ways to improve the framework for system deployment.
Heat integration and industrial symbiosis have been identified as key strategies to foster energy efficient and low carbon manufacturing industries (see e.g. contribution of Working Group III in IPCC's 5th assessment report). As energy efficiency potentials through horizontal and vertical integration are highly specific by site and technology they are often not explicitly reflected in national energy strategies and GHG emission scenarios. One of the reasons is that the energy models used to formulate such macro-level scenarios lack either the necessary high technical or the spatial micro-level resolution or both. Due to this lack of adequate tools the assumed huge existing potentials for energy efficiency in the energy intensive industry cannot be appropriately appreciated by national or EU level policies. Due to this background our paper describes a recent approach for a combined micro-macro energy model for selected manufacturing industries. It combines national level technical scenario modelling with a micro-modelling approach analogous to total site analysis (TSA), a methodology used by companies to analyse energy integration potentials on the level of production sites. Current spatial structures are reproduced with capacity, technical and energy efficiency data on the level of single facilities (e.g. blast furnaces) using ETS data and other sources. Based on this, both, the investments in specific technologies and in production sites are modelled and the evolvement of future structures of (interconnected) industry sites are explored in scenarios under different conditions and with different objectives (microeconomic vs. energy efficiency optimization). We further present a preliminary scenario that explores the relevance of these potentials and developments for the German steel industry.
Energy intensive industries are one of the fields in which strong increases of energy efficiency and deep decarbonisation strategies are particularly challenging. Although European energy intensive industries have already achieved significant energy and greenhouse gas reductions in the past, much remains to be done to make a significant contribution to achieving European as well as national climate mitigation targets of greenhouse gas emission reductions by -80% or more (compared to the baseline of 1990). North Rhine-Westphalia (NRW) is a European hotspot for coping with this challenge, accommodating more than 10% of the energy intensive industries of the EU28. It is also the first German state to have adopted its own Climate Law, enacting state-wide CO2 emission reductions by 80% until 2050 compared to 1990. The state government initiated the project "Platform Climate Protection and Industry North-Rhine Westphalia" to identify and develop the necessary far-reaching low carbon innovation strategies for energy intensive industries. Heart of the project was a dialogue process, which involved a broad spectrum of stakeholders from steel, chemical, aluminium, cement, glass and paper producing industries. Besides enhancing and broadening the knowledge on high efficiency and low-carbon technologies within industries, the aim was to explore possible pathways and preconditions for the application of these technologies in energy intensive industries as well as to strengthen the motivation of companies for initiatives and investments in technologies with lower CO2 emissions. The results of the dialogue shall provide a basis for a possible low-carbon industry roadmap NRW and may also serve as an example for other industrialized regions in the EU and globally. The paper sketches the structured dialogue process with the stakeholders from companies as well as industrial associations and presents the learnings regarding the engagement of energy intensive industries into ambitious climate policies on a regional level. These include existing limitations as well as chances in the respective sectors on the state level, regarding their economic and technical structures as well as their innovation systems. The findings are based on more than a dozen stakeholder workshops with industry companies and more than 150 individual representatives of NRW's energy intensive industries as well as on background research in the initial phase of the project.
Sustainable out-of-home nutrition can help achieve overarching sustainability goals through a transformation in demands of consumers in this growing market. Studies indicate that individual food choice behaviours in out-of-home settings relate to a wide set of personal, social and situational factors. These factors can be influenced by various intervention strategies. In an expert meeting and a focus group we invited caterers and consumers to generate, discuss and evaluate various practical intervention ideas. Both parties largely perceive the explored ideas as useful and agree on key intervention ideas. Overall caterers and consumers state to prefer nudging strategies over information and participation interventions.
Energy efficiency activities are high on the current EU energy policy agenda. Key policy instruments like the Energy Efficiency Directive (EED), the Energy Performance of Buildings Directive (EPBD) and the Energy Labelling Directive are under revision.
In a project for the German government, we therefore analysed the effectiveness and consistency of existing sectoral policy packages anew, to open the discussion on which policy changes to the EU's energy efficiency policy packages are crucial to reach the targets.
This comprehensive review addressed the industrial, buildings, and transport sectors plus the overarching governance framework (targets and roadmaps, EED, energy taxation and EU ETS). For each of these, the first step was a gap analysis of the main deficits in the sectoral policy packages, against effective model packages.
At first glance, the combination of energy efficiency policies at EU level seems already quite comprehensive. However, their design and implementation often lack a consistent and ambitious approach to leverage their full potential.
To give some examples of the many shortcomings identified, the governance framework suffers from exceptions and the transport sector being only marginally considered in the EED; an outdated Energy Tax Directive has very low minimum rates and several exception clauses; there is a lack of commitment to implement energy management systems and investment projects in large companies; a clear EU-wide definition of nearly zero energy buildings (nZEB) is missing; and the labelling of energy-using products is still confusing for consumers. Subsequently, we elaborated comprehensive policy recommendations to increase the effectiveness of all these policies, and to bridge some gaps with new policies. A list of priorities was established to sort them by their relevance.
A case study in the rural area of South Westphalia, Germany, showed the importance of independent intermediaries to support the development and implementation of sustainable energy and efficiency projects. The idea behind the project "Dorf ist Energie(klug)" (Village is Energy(smart)) was to foster, accompany, and support energy and efficiency projects in villages from the first idea to final implementation. Therefore, the South Westphalia Agency as independent intermediary initiated an application process in which villages could apply with their innovative energy and efficiency project ideas. During the following process the chosen "coaching villages" benefitted from the consultation of teams of thematic experts. Villages with less developed projects were supported through idea workshops with experts and study visits.
The accompanying scientific study evaluated the overall process focussing on the transferability, the sustainability and the quality of the process. Furthermore, a self evaluation tool for (energy) projects in villages was developed and tested in two of the participating coaching villages.
The paper gives a short insight into the project "Dorf ist Energie(klug)". It presents the methodology of the accompanying study and the results with a special focus on the role of the South Westphalia Agency as independent intermediary. Finally, it discusses the transferability and sustainability of the project.
Since human nutrition is responsible for about 30 % of the global natural resource use and in order to decrease resource use to a level in line with planetary boundaries, Lukas et al. (2016) proposed a re-source use reduction in the nutrition sector by a factor 2 (Material Footprint).
The catering sector needs clearly defined indicators to assess their business activities' impact on ecology, social aspects, economic value, and health status. Within the project NAHGAST two sets of indicators, called NAHGAST Meal-Basis and NAHGAST Meal-Pro were developed. The indicator sets are proposed to measure several, with sustainability-associated challenges, such as such as the ecological, social and economical effects, which may come along with the production and the consumption of a meal. Basically, the NAHGAST Meal-Basis deals with qualitative indicators, such as the amount of organic food per serving or the percentage of food wasted. This set is supposed to enable leaders to assess the sustainability of their meals and to visualize future improvements on a simplistic level. The NAHGAST Meal-Pro deals with a more sophisticated set of indicators, such as the carbon and material footprint or the cost recovery per meal. Both sets are underpinned with sus-tainable targets and elaborated as an Excel-based assessment tool, which is tested within a one-year case study. The usefulness and the limits of the tool, as well as current results of the implementation including pro-posed challenges, are discussed.
Food labels are able to support consumers in making more sustainable food choices in out-of-home consumption situations. Thereby, the effect of changing consumption behaviour depends on the format of food labels and on the information it provides. In order to assess the importance of the amount of information as well as the design of food labels displaying sustainability aspects, we test different formats of food labels using a best-worst choice design. So far, no research tested a variation of information depth while keeping label designs fixed. We find clear preferences across both dimensions. Results indicate that consumers regard labels with a higher information depth as more helpful in order to choose a sustainable meal. For the label design it became obvious that the slider-design is preferred over footprints and traffic light label design.
Energy sufficiency has recently gained increasing attention as a way to limit and reduce total energy consumption of households and overall. This paper presents selected results of a research project funded by the German Federal Ministry of Education and Research that examined the potentials and barriers for energy sufficiency with a focus on electricity in households, how household members perceive sufficiency practices, and how policymakers could support and encourage these. Bottom-up calculations for an average 2-person household in Germany yielded a total electricity savings potential from energy efficiency and sufficiency combined of theoretically up to 75 %.
The continuous growth of per capita living space was identified as one important driver for additional energy consumption both for heat and electricity. The paper will present findings of a representative survey of 600 persons responsible for the housework. It revealed that a part of the households is already practicing sufficiency options or are open towards these. Up to 30 % of these households can imagine, given the right conditions and policy support, to move to a smaller dwelling or to share an apartment with others when they are older.
Results of a first comprehensive analysis of an energy sufficiency policy to encourage and support households to sufficiency practices form the second part of the paper, with a focus on the feasibility and potential effectiveness of instruments for limiting the growth in average living space per person. This includes a case study on fostering communal housing projects as a measure to reduce living space. Further, the feasibility of a cap scheme for the total electricity sales of a supplier to its customers was examined. Instruments supporting energy-efficient and sufficient purchase and use of equipment complete the integrated energy sufficiency and efficiency policy package.
The paper will finally present the project's conclusions on an integrated energy sufficiency policy package resulting from this analysis.
The core objective of Energy Efficiency Watch 3 (EEW3) is to establish a constant feedback loop on the implementation of European and national energy efficiency policies and thus enable both compliance monitoring and mutual learning on effective policy making across the EU. The project team applied a mixed-method approach to assess energy efficiency policy developments in EU Member States. It analysed progress of national policies by screening official documents, sought experts' knowledge via an EU-wide survey and has been creating new consultation platforms with a wide spectrum of stakeholders including parliamentarians, regions, cities and business stakeholders. Analysis of the National Energy Efficiency Action Plans (NEEAPs), the expert survey with input from over 1,100 experts on policy ambition and progress in each Member State, as well as 28 Country Reports have been central elements in EEW3. This paper will present the main conclusions and policy recommendations of EEW3. In doing so, it will first summarise the findings of the document analysis based on the 28 Country Reports, showing developments of energy efficiency policies since the second NEEAP in 2011 in a cross-country overview for six sectors. These findings are then contrasted with the experts' perspective on progress in energy efficiency policies in their countries as collected in the EEW survey. Moreover, ten case studies of good practice energy efficiency policies are shown, three of them will be presented in more detail. The paper ends with key policy conclusions for improving the effectiveness of European energy efficiency policies. A key finding is that policy implementation has improved a lot since 2011 but more is needed to achieve the EED Art. 7 and other targets.
One of the most pressing issues of climate policy is how to get building owners to invest in the energy efficiency of their homes. The German federal government has set the goal of decreasing the energy demand of buildings by 80 to 95 percent until 2050. One pillar of the strategy to support building owners in this task is the provision of targeted energy advice, to both motivate owners to implement an energy efficiency refurbishment and help them to choose the most efficient measures. In this paper we analysed the demand for energy advice in three German cities of the Ruhr area finding the number of energy consulting provided to be extremely low compared to the stated goals. Based on the approach of joint knowledge production we invited stakeholders from the three cities to participate in a series of workshops in order to develop ideas how to more effectively bring homeowners and energy advisors together. As a result, different energy advice experiments were co-operatively developed for each city targeting different groups by using tailored channels for outreach. The evaluation of both the process as well as the outcome of the experiments indicates that while joint knowledge production is a suitable approach to enable knowledge transfer and formation of new networks between different stakeholders in science and practice, it does not necessarily lead to superior approaches with regard to effectively addressing a policy issue at hand. Apart from the experiment in which the window of opportunity change of building ownership was taken advantage of, participation of target groups in the experiments has been soberingly low, underlining the value of so-called trigger points when designing effective outreach strategies to building owners.
Energy efficiency improvements have numerous benefits/impacts additional to energy and greenhouse gas savings, as has been shown and analysed e.g. in the 2014 IEA Report on "Multiple Benefits of Energy Efficiency". This paper presents the Horizon 2020-project COMBI ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe"), aiming at calculating the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in 2030. The project covers the most relevant technical energy efficiency improvement actions and estimates impacts of reduced air pollution (and its effects on human health, eco-systems/crops, buildings), improved social welfare (incl. disposable income, comfort, health, productivity), saved biotic and abiotic resources, and energy system, energy security, and the macroeconomy (employment, economic growth and public budget). This paper explains how the COMBI energy savings potential in the EU 2030 is being modelled and how multiple impacts are assessed. We outline main challenges with the quantification (choice of baseline scenario, additionality of savings and impacts, context dependency and distributional issues) as well as with the aggregation of impacts (e.g. interactions and overlaps) and how the project deals with them. As research is still ongoing, this paper only gives a first impression of the order of magnitude for additional multiple impacts of energy efficiency improvements may have in Europe, where this is available to date. The paper is intended to stimulate discussion and receive feedback from the academic community on quantification approaches followed by the project.
Following the decisions of the Paris climate conference at the end of 2015 as well as similar announcements e.g. from the G7 in Elmau (Germany) in the summer of 2015, long-term strategies aiming at (almost) full decarbonisation of the energy systems increasingly move into the focus of climate and energy policy. Deep decarbonisation obviously requires a complete switch of energy supply towards zero GHG emission sources, such as renewable energy. A large number of both global as well as national climate change mitigation scenarios emphasize that energy efficiency will likewise play a key role in achieving deep decarbonization. However, the interdependencies between a transformation of energy supply on the one hand and the role of and prospects for energy efficiency on the other hand are rarely explored in detail.
This article explores these interdependencies based on a scenario for Germany that describes a future energy system relying entirely on renewable energy sources. Our analysis emphasizes that generally, considerable energy efficiency improvements on the demand side are required in order to have a realistic chance of transforming the German energy system towards 100 % renewables. Efficiency improvements are especially important if energy demand sectors will continue to require large amounts of liquid and gaseous fuels, as the production of these fuels are associated with considerable energy losses in a 100 % renewables future. Energy efficiency on the supply side will therefore differ considerably depending on how strongly the use of liquid and gaseous fuels in the various demand sectors can be substituted through the direct use of electricity. Apart from a general discussion of the role of energy efficiency in a 100 % renewable future, we also look at the role of and prospects for energy efficiency in each individual demand sector.
The European Horizon 2020-project COMBI ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe") aims at estimating the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in the year 2030. The project goal is to cover the most important technical potentials identified for the EU27 by 2030 and to come up with consistent estimates for the most relevant impacts: air pollution (and its effects on human health, eco-systems/crops, buildings), social welfare (including disposable income, comfort, health and productivity), biotic and abiotic resources, the energy system and energy security and the macro economy (employment, economic growth and the public budget). This paper describes the overall project research design, envisaged methodologies, the most critical methodological challenges with such an ex-ante evaluation and with aggregating the multiple impacts. The project collects data for a set of 30 energy efficiency improvement actions grouped by energy services covering all sectors and EU countries. Based on this, multiple impacts will be quantified with separate methodological approaches, following methods used in the respective literature and developing them where necessary. The paper outlines the approaches taken by COMBI: socio-economic modelling for air pollution and social welfare, resource modelling for biotic/abiotic and economically unused resources, General Equilibrium modelling for long-run macroeconomic effects and other models for short-run effects, and the LEAP model for energy system modelling. Finally, impacts will be aggregated, where possible in monetary terms. Specific challenges of this step include double-counting issues, metrics, within and cross-country/regional variability of effects and context-specificity.
A learning experience : integrating theory and practice for the implementation of INDCs ; thinkpiece
(2016)
A major cornerstone on the way to low-carbon sustainable development on a global scale will be a swift and effective implementation of all countries' INDCs submitted to the UNFCCC prior to Paris. However, doing so will require transforming development pathways away from currently pervasive carbon lock-ins. This can only be successful if countries take a systemic view on their development agendas, and link mitigation, adaptation and other developmental priorities together for a coherent overarching sustainable development strategy. The ownership for this process needs to be with the countries themselves as such strategies touch fundamentally upon national policy-making and implementation. At the same time, developing countries have access to bi- and multilateral financial and technical cooperation. To enable a systemic, country-led perspective, development cooperation needs to shift its paradigms away from currently prevalent project-level interventions.
A truly innovative and transformational shift with the objective of pursuing a low-carbon and climate resilient society needs to open up space for experimentation as new ways of doing things need to be put into practice. Experiments will not always be successful, but foster learning on a national as well as an international level on pitfalls and solutions in new approaches to low-carbon sustainable development. Not least, there needs to be a renewed focus on programmatic approaches that link various topical domains for a country-led process, and a critical look at development work that is "doomed to succeed".
Our article draws from systems theory, development studies and recent work on transitions studies and transformational change in the international domain. It links up different theoretical concepts with practical approaches in order to outline a future development agenda that will be owned by developing countries and supported non-invasively by bi- and multilateral development cooperation to foster low-carbon development pathways that are urgently needed to solve the climate crisis.
The South African government started the development of a basic energy efficiency policy framework in 2005, including a voluntary label for refrigerators. This initial label was the intended precursor to a mandatory standards and labelling (S&L) programme, but the impacts achieved were only very limited. Based on this first experience, the South African Bureau of Standards (SABS) formed in 2008 a working group for the development of the new and more specific South African National Standard SANS 941. This standard identifies energy efficiency requirements, labelling and measurement methods as well as the maximum allowable standby power for a set of appliances as reliable basis for introducing a mandatory regulation. Nevertheless, due to many existing barriers, such as lack of funding and low priority assigned to the initiative, a very long period passed by between the S&L planning and final policy implementation. Finally, in November 2014, the South African government published mandatory performance standards coming into force in 2015/2016 for a first set of appliances consisting of refrigerators, washing machines, dryers, dishwashers, electric water heaters, ovens, A/C and heat pumps. To analyse the effectiveness of the new S&L programme and the potential influence of delays in the implementing process, the authors performed an immediate first-hand evaluation of the new policy.
As analytical reference base for available energy efficiency potentials, results from bottom-up scenario calculations will be presented exemplarily as case study for cold appliances covered by the S&L programme. A retrospective market study will show market trends before policy implementation and compare results with the new mandatory requirements. For the further policy analysis, a programme theory approach will be applied, in order to better understand why, how and under what conditions the policy works. Relationships with other energy efficiency policies and measures as well as positive or negative effects will be described. Furthermore, cause-impact relationships will be analysed to explain the functioning of the policy. Finally, success and failure factors will illustrate what needs to be done to achieve the desired energy efficiency targets. Henceforth, even though this study does not assess the direct transferability of the South African S&L programme to other regions, its findings could be relevant and useful for countries planning the implementation of similar policies.
Human nutrition is responsible for about 30% of the global natural resource use. In order to decrease resource use to a level in line with planetary boundaries, a resource use reduction in the nutrition sector by a factor 2 is suggested. A large untapped potential to increase resource efficiency and improve consumers' health status is assumed, but valid indicators and general guidelines to assess these impacts and limits can barely be found. Therefore we will have a try to define sustainable limits towards the individuals' daily diet and therefore stimulate current available scientific debate.
Within the paper an examination of existing indicators and assessment methods is carried out. We set the focus on health indicators, such as energy intake, and environmental indicators, such as the carbon or material footprint. The paper aims to provide first, an assessment of core indicators to explore the sustainability impact of foodstuff, and second, a deeper understanding and a discussion of sustainable limits for those dimensions of food and nutrition. Therefore we will discuss several ecological and health indicators which may be suitable to assess the sustainabilty impact and indicate differences or similarities. As a result it becomes obvious that several ecological indicators "point in the same direction" and therefore a discussion about the variability and the variety of these indicators has to be faced in the future. Further the definition of sustainable levels per indicator is an essential aspect to get an idea about the needed barriers for a sustainable nutrition, by now first steps had been made, but no binding guidelines are available yet. Therefore the paper suggests a few indications to set up sustainable levels for health and environmental indicators, based on the idea to reduce the resource use level up to 30-50% in 2030.
The international governance landscape on climate change mitigation is increasingly complex across multiple governance levels. Climate change mitigation initiatives by non-state stakeholders can play an important role in governing global climate change and contribute to avoiding unmanageable climate change. It has been argued that the UNFCCC could and should play a stronger role in "orchestrating" the efforts of these initiatives within the wider climate regime complex and thus inspire new and enhanced climate action. In fact, the Lima-Paris Action Agenda supporting cooperative climate action among state and non-state actors was supposed to be a major outcome of COP21.
There is little doubt that successful mitigation initiatives can create a momentum for climate protection. What is missing, is a systematic analysis of how this momentum can feed back into the UNFCCC negotiation process, inspiring also enhanced and more ambitious climate mitigation by states in future iterations of the cycle of nationally determined contributions under the Paris Agreement. This paper aims to close this gap: building on a structurational regime model, the article [1] develops a theory of change of how and through which structuration channels non-state initiatives can contribute to changing the politics of international climate policy; [2] traces existing UNFCCC processes and the Paris Agreement with a view to identifying entry points for a more direct feedback from non-state initiatives; and [3] derives recommendations on how and under which agenda items positive experiences can resonate within the UNFCCC negotiation process.
National policies for resource efficiency and waste management : structures, impacts, and deficits
(2015)
De-industrialization, climate and demographic changes are only a few key words that indicate the challenge of urban development in many industrialized countries for the coming decades. A fundamental transformation of infrastructure and the built environment is expected to adjust to future needs. Numerous concepts of integrating efficiency and renewable energy sources into urban planning were elaborated in recent years. Energy sufficiency in the meaning of voluntary demand reduction of energy intensive goods and services is the third and mostly forgotten pillar of sustainable development. However, organizational and spatial measures are needed to support behavior modification. This paper presents results of a transdisciplinary research design with local stakeholders and scientific experts to develop an understanding of what energy sufficiency might contribute to sustainable urban development. Based on the Multi-Level-Perspective of the transition research approach, it analyzes how stakeholders and experts define energy sufficiency structures for the shrinking district of Vohwinkel (Germany). The paper also shows a compilation and evaluation of measures which facilitate energy sufficient behavior in the fields of space heating and passenger transport on a local level. The methodological concept comprises expert interviews, thought experiments with stakeholders to develop a vision of an "energy sufficient Vohwinkel 2050" as well as a stakeholder workshop to discuss the results. A shrinking population is seen as a chance to actively adapt the built environment to foster energy sufficiency.
Energy systems with high shares of renewable electricity are feasible, but require balancing measures such as storage, grid exchange or demand-side management to maintain system stability. The demand for these balancing options cannot be assessed separately since they influence each other. Therefore, a model was developed to analyze these mutual dependencies by optimizing a concerted use of balancing technologies. This model is presented here. It covers the European electricity system in hourly resolution. Since this leads to a large optimization problem, several options for reducing system complexity are presented. The application of the model is illustrated with a case study outlining the effects of pumped hydro storage and controlled charging of electric vehicles in central Europe.
Questions regarding the societal impact of research, how to reach impact and what is needed to stabilize the effects are rising from various sides. Societal impact is seen as part of a social contract that exists between science and society. This entails that research must address pressing social issues which in turn implies a number of core challenges such as gathering evidence or the creation of actionable knowledge. The transdisciplinary research approach "real-world laboratory" is discussed as possible way to address and to overcome some of the challenges. A "real-world laboratory" currently being established in the city of Wuppertal serves as case study, linking conceptual and empirical investigations.
"Sufficiency" is beginning to emerge as a new value throughout Western societies and the question asked in this article is: Can we observe cases with actual opportunities to link successful business strategies of incumbents to principles of sufficiency? Thus, how feasible is sustainable entrepreneurship for incumbents? As an innovative conceptual approach, it will be analyzed how brand claims function as narrative translation mechanisms in situations where tensions emerge between corporate narratives and unexpected societal trends, e.g. the emergence of sufficient lifestyles. It will be shown that even though these are still a niche phenomenon, a focus on powerful brands and the narratives connected to them are an important element in understanding the role of incumbents in transitions to sustainability.
Small-scale residential biomass combustion for space heating and warm water production already holds a considerable share on overall energy production from biomass in Europe. In the existing regulative framework of EU air quality and climate protection targets, an extended usage of renewable biomass heating without an increase of harmful emissions is urgently needed. In this context, the FP7 project "EU-UltraLowDust" (ULD) aimed at the demonstration of highly efficient and ultra-low emission small-scale biomass combustion technologies and the development of supporting policy recommendations.
New combustion technology operating at almost zero particulate matter (PM) emissions has been demonstrated, rivalling even the performance of state-of-the-art natural gas fuelled systems. In this context, the authors analysed EU policy options for a faster diffusion of these new innovative technologies. The analysis presented in this paper is based on results from an original impact assessment with special focus on energy efficiency and emission scenarios, including the potential effects of a broad deployment of the new ULD technologies as well as the early replacement of poor performing existing installations.
As the derived results show that major shares of energy consumption and emissions from residential biomass combustion in the EU are caused by old heating systems, specific policy measures for new and existing installations have been analysed. Following this, a recommended and harmonized policy package for new Small Combustion Installations (SCI) to be put on the market as well as for existing SCI in the stock has been developed, which will be presented in this paper. The basic policy package addresses new installations and consists of a two-step approach, aiming at enhancing the current and forthcoming policies addressing the SCI market in Europe. A complementary second policy package for existing installations aims specifically at the early replacement of SCI already installed in the stock, which are characterized by low efficiency and high emissions.
Investments in urban transport should deliver the maximum economic, social and environmental benefits; in times of constrained budgets, projects' economic viability is often the deciding factor. This paper discusses the current practices and challenges facing cities in assessing urban transport interventions. On this basis, it develops options for decision-makers to appraise small-scale, sustainable urban transport policy measures.
The analysis of current appraisal practice shows that data requirements and complexity are cities’ main obstacles appraising projects and comparing potential alternatives. Additionally, there is often a risk that project appraisal enters the planning process too late to play any meaningful role. Conducting a Cost-benefit
analysis (CBA) ex-ante is often only approved if the implementation of the measure in question is already likely. Often, a CBA is a means to access funds rather than a basis for decision-making. Project appraisal of small-scale and non-infrastructure-based measures is often simply too expensive.
On the basis of these findings, the paper discusses the following alternatives to comprehensive CBAs: 1) learn from others, 2) use a simplified assessment method, 3) rely on norms and values. All of these options aim to cope with the trade-off between effort and certitude. In practice, some policy-makers may already apply one or more of these options, but this has not been documented in a systematic manner. A systematic documentation of such practices could be a major step forward for implementation of sustainable and integrated urban transport projects, as it would shed some light on the reasoning behind decisions, from which conclusions could be drawn on the likely follow-on effects thereof and also possible improvements to the process.
Jordan's electricity system has and continues to experience considerable pressures for reform due to continuous increase of electricity demand combined with high dependency on imported fossil fuels and a partially subsidised electricity market. In this paper we use the transitions pathways to examine and analyse pressures on the regime in relation to plausible future developments of particular niches such as renewable energy technologies. Our analysis is methodologically distinct in that we explicitly identify mechanisms operating in the system and relate those to existing scenarios to assess future developments. Currently, we see future developments being sensitive to the actions of key regime actors.
The electric utility sector in Australia, Germany and the U.S. are all going through major changes driven by declining sales, increasing use of distributed energy sources and policy responses to global climate change. This paper discusses efforts in each of these countries to reform their electric industries, address climate change and promote energy efficiency. Going forward, we see a role for government, utilities and private market energy efficiency efforts in all three countries, although the emphasis will vary by country and will evolve over time. Where all three parties can work together with a common vision, reform efforts are likely to be more successful and more sustained. In all three countries the future is uncertain. In the face of this uncertainty, energy efficiency supporters need to keep abreast of these changes, and find more flexible and nimble policy strategies for energy efficiency to prosper, as the future is likely to unfold in unexpected ways.
Energy efficiency of a range of domestic appliances covered by the labelling and ecodesign directives has improved significantly over the last 15 years. However, the power consumption of the German residential sector has remained relatively constant over this period. Besides other factors, such as decreasing average household size, the main reasons for this development were the increases of the types, features, size, equipment stock and usage times of appliances and devices in private households.
The project "Energy Sufficiency - strategies and instruments for a technical, systemic and cultural transformation towards sustainable restriction of energy demand in the field of construction and everyday life" investigates how the complementation of energy efficiency with energy sufficiency could lead to more user adequate domestic products and product-service systems and thereby result in an absolute reduction of power consumption.
In this project, energy sufficiency is defined as a strategy to reduce energy consumption by three approaches:
1. Quantitative reduction of sizes, features, usage times of devices etc.
2. Substitution of technical equipment in households by e.g.urban services.
3. Adjustment of technical services delivered by appliances toutility needed and desired by users.
The energy saving effects of an application of these approaches were modelled for different types of households and the energy saving potentials of energy sufficiency quantified. Innovative approaches for user adequate products and services were developed in open innovation workshops by the Design Thinking method. The paper summarizes some of the intermediate results of theoretical and transdisciplinary investigations of the project that runs until May 31, 2016. Furthermore, a first set of design criteria for user adequate appliances enabling energy sufficiency are developed based on these results. The paper concludes with suggestions for the future development of energy labelling and ecodesign derived from the design criteria and supplemented by examples of existing requirements according to the voluntary environmental label "Blauer Engel".
The efficiency strategy to exploit the potential for energy savings in buildings still is applied rather slowly in most countries. In addition, there are indications that energy savings are partly compensated particularly by wealth but also rebound effects, the "empty nest" (persistence of elderly people and couples in family homes), and cohort effects (e.g. vintages of people or buildings). In Germany, as in other European countries, the existing trend in housing is a continuously growing floor space per capita. Over the last decades it expanded from about 20 m2 in 1960 to currently 45 m2 per person. Forecasts expect a further increase to more than 50 m2 per person. Obviously, more floor space needs more energy for space heating and cooling, ventilation, and lighting, but it also allows the household to operate more and or bigger appliances, all of which increase energy consumption.
On the other hand, housing projects emerge offering relatively small private living spaces in combination with various shared spaces to use. Many of them are based on private initiatives. But what is the motivation behind it? And is there a higher need for new living concepts in the future?
The proposed paper presents main drivers of increasing floor space per capita in Germany and discusses the question if more space is necessary for higher comfort. It presents different examples of housing concepts that strive to achieve good living with less space and suggests a "building typology of sufficiency".
Finally, the paper discusses qualitatively to which extent these housing concepts can lead to less energy use and emissions. In this way sufficiency could be best friend with efficiency and tackle wealth, rebound, and other effects that counter-act efficiency progress. But therefore, as the paper concludes, politics and policies should recognise sufficiency as a field of action instead of referring to individual decisions and lifestyles.
Energy sufficiency policy : an evolution of energy efficiency policy or radically new approaches?
(2015)
In the last four decades, energy efficiency increased significantly in OECD countries. However, only during the most recent years, total energy consumption started to decrease a little, and much more slowly than energy efficiency potentials would suggest. Energy sufficiency has therefore gained new attention as a way to limit and reduce total energy consumption of a household or a country overall.
The project "Energiesuffizienz" funded by the German ministry for research has examined what energy sufficiency actually is, and what householders, household members but also manufacturers and local authorities could do to make electricity use in the home more sufficient. The focus of this paper is the policy part of the project - the first comprehensive analysis of an energy sufficiency policy.
The objective is to find out how policy can support market actors in using the energy sufficiency options identified. As for energy efficiency policy, it starts with the gathering of potential sufficiency actions and the analysis of the relevant barriers all market actors face, to derive recommendations for which policy instruments need to be combined to an effective policy package, and which other pre-conditions have to be met. Energy efficiency and energy sufficiency should not be seen as opposed to each other but work in the same direction - saving energy. Therefore, some instruments of the energy sufficiency policy package may be the same as for energy efficiency - such as energy taxation, and linear or progressive energy prices. Some may simply adapt technology-specific energy efficiency policy instruments. Examples are progressive appliance efficiency standards, standards based on absolute consumption, or providing energy advice. However, sufficiency may also require radical new approaches particularly to mitigate the drivers of non-sufficiency. They may range from promotion of completely different services for food and clothes cleaning, to instruments for limiting average dwelling floor area per person, or to a cap-and-trade system for the total electricity sales of a supplier to its customers, instead of an energy efficiency obligation. The paper presents these and other elements of an integrated energy sufficiency policy package resulting from this analysis.
The overall objective of the web-based consumer information tool Euro-Topten is to promote the market transformation towards energy efficient products. Euro-Topten informs consumers about the most energy efficient products in various categories and thereby aims to directly influence the purchasing decisions of individuals or professional buyers.
Providers of internet-based information tools are confronted with the problem, that there is no bidirectional interaction with the users. Hence, it is difficult to evaluate if the specific needs of users are addressed, if and how the user processes this information and to what extent the information influences the user's decision making process.
To study these questions, a web-based survey was conducted in two consecutive rounds. In the first round the survey focused on the assessment of the information tool itself and the motivation for using the Euro-Topten websites. This survey was online on all active Euro-Topten partner websites from October to December 2012. In total, 1791 users completed the survey.
In the second round, a subset of the survey population was queried again. 1,043 participants agreed to take part in a more comprehensive follow up survey, 383 completed the second survey between May and July 2013. The second survey concentrated on the question how Euro-Topten has influenced the purchasing behaviour of the survey participants. This gave significant insights on how the information on the Euro-Topten websites has affected purchasing decisions of the surveyed users.
Based on a comparison of performance indicators of the most efficient products recommended on the Euro-Topten websites with performance indicators of a base case product available on the market, avoided energy demand could be estimated for those users, who bought products from the Euro-Topten list. Based on these results, two impacts of Euro-Topten could be estimated: The influence of Euro-Topten on purchasing decision of users and the associated reductions in energy demand and CO2-emissions.
After a wave of privatizations in the end of the 1990s, the electrical power supply of many municipalities in Germany has been returned into public hands. Many municipalities discover chances and possibilities for local action, which arise with remunicipalisation. The local policy-makers realize that remunicipalisation offers the opportunity of implementing an independent energy policy at local level which is critical in creating a transformation to a sustainable energy system based on energy efficiency and renewable energies. The municipal ownership allows a strong governance towards more political influence in the local energy market. In addition, there is a clear opinion of the population: 81 % of citizens surveyed say they trust their local municipal utility, compared to only 26 % who say they trust corporations (VKU-Survey, 2010). In summary, there are many good reasons for local politicians to establish their own municipal utilities. The payback for municipalities is tangible when the local utility focuses on reliably providing affordable energy rather than on increasing its returns. The new municipal power utilities stimulate competition and contribute to the renewal / restructuring of the traditional energy market.
The founding of 72 municipal utilities since 2005 leads us to ask for the reasons. The study reviews the German trend towards municipal ownership of local utilities, assessing their performance based on 10 targets related to the energy transition, climate protection, and the local economic impact: 1. Achieving environmental objectives and organization of the local "Energiewende". 2. Higher local added value. 3. Harnessing tax regulations for improving municipal services. 4. Improving the income situation of the city. 5. Democratization of supply and stronger orientation towards the common good (public value). 6. Creating and protecting good jobs. 7. Acting in social responsibility in energy supply. 8. Expansion of eco-efficient energy services. 9. Harnessing customer relations and public image. 10. Materialising synergies with other sectors.
Based on expert opinions, the study finds out that the likelihood of these targets being reached is "high to very high". The aim of this article is to provide a compact and basic understanding of the possible reasons for the phenomenon of remunicipalisation.
The role of gender concerns in the planning of small-scale energy projects in developing countries
(2014)
Techno-economic feasibility study of solar and wind based irrigation systems in Northern Colombia
(2014)
Water pumping systems powered by solar and wind energy are a clean, decentralized and economic alternative for the irrigation of crops. The intense droughts experienced in the last years in Northern Colombia due to particularly strong Nino Phenomena have reactivated the need of reliable water pumping irrigation systems in that region. This study aims to assess the techno economic feasibility of solar and wind based pumping irrigation system, taking as case study the Municipality of Piojo in the Atlantico department. In the first stage of the study the irrigation water requirements were determined by using the software CROPWAT based on two different crop patterns that represent existing feasible alternatives for small farmers of the region: i) a common crop pattern, which represent the current average distribution of crops for subsistence farming and ii) a fruit cash crop pattern that comprises crops for which well established markets in the region exist. Solar wind and diesel based pumping systems were sized based on the crop water demands for 1 ha. The unit irrigation costs of the three technologies, the two crop patterns and the three irrigation methods (surface, sprinkler and drip) were calculated and compared. The economical analysis was complemented with a cost-benefit analysis over 20 years. Our results show that both renewable energy based pumping systems (wind and solar) can cover the irrigation water demands of small farmers in the region. The economical analysis shows that windmills are the most cost effective solution followed by the solar pumping system. Diesel pumping system was the less cost effective, even though it does not comprise investment in water storage tank. The cost benefit analysis demonstrates that any irrigation system is financially unfeasible when providing water to a common crop pattern. In case of the fruit cash crop scenario the highest dividends were obtained by the wind pumping system and the lowest dividends by the diesel pumping system. The lowest payback period was obtained by the windmill after 7 years and could be even feasible after the fifth year if the surplus water would be used to irrigate larger areas. Dividends obtained in a fruit cash crop scenario with irrigation after 20 years were in the range of EUR 5200 and EUR 11200 higher than dividends obtained by the same crop pattern but without irrigation.