Refine
Has Fulltext
- yes (14)
Document Type
- Peer-Reviewed Article (14) (remove)
Language
- English (14) (remove)
Division
- Energie-, Verkehrs- und Klimapolitik (14) (remove)
Demand-side mitigation strategies have been gaining momentum in climate change mitigation research. Still, the impact of different approaches in passenger transport, one of the largest energy demand sectors, remains unclear. We couple a transport simulation model to an energy system optimisation model, both highly disintegrated in order to compare those impacts. Our scenarios are created for the case of Germany in an interdisciplinary, qualitative-quantitative research design, going beyond techno-economic assumptions, and cover Avoid, Shift, and Improve strategies, as well as their combination. The results show that sufficiency - Avoid and Shift strategies - have the same impact as the improvement of propulsion technologies (i.e. efficiency), which is reduction of generation capacities by one quarter. This lowers energy system transformation cost accordingly, but requires different kinds of investments: Sufficiency measures require public investment for high-quality public services, while efficiency measures require individuals to purchase more expensive vehicles at their own cost. These results raise socio-political questions of system design and well-being. However, all strategies are required to unleash the full potential of climate change mitigation.
There is a growing body of scientific evidence supporting sufficiency as an inevitable strategy for mitigating climate change. Despite this, sufficiency plays a minor role in existing climate and energy policies. Following previous work on the National Energy and Climate Plans of EU countries, we conduct a similar content analysis of the recommendations made by citizen assemblies on climate change mitigation in ten European countries and the EU, and compare the results of these studies. Citizen assemblies are representative mini-publics and enjoy a high level of legitimacy.
We identify a total of 860 mitigation policy recommendations in the citizen assemblies' documents, of which 332 (39 %) include sufficiency. Most of the sufficiency policies relate to the mobility sector, the least relate to the buildings sector. Regulatory instruments are the most often proposed means for achieving sufficiency, followed by fiscal and economic instruments. The average approval rate of sufficiency policies is high (93 %), with the highest rates for regulatory policies.
Compared to National Energy and Climate Plans, the citizen assembly recommendations include a significantly higher share of sufficiency policies (factor three to six) with a stronger focus on regulatory policies. Consequently, the recommendations can be interpreted as a call for a sufficiency turn and a regulatory turn in climate mitigation politics. These results suggest that the observed lack of sufficiency in climate policy making is not due to a lack of legitimacy, but rather reflects a reluctance to implement sufficiency policies, the constitution of the policy making process and competing interests.
Sufficiency measures are potentially decisive for the decarbonisation of energy systems but rarely considered in energy policy and modelling. Just as efficiency and renewable energies, the diffusion of demand-side solutions to climate change also relies on policy-making. Our extensive literature review of European and national sufficiency policies fills a gap in existing databases. We present almost 300 policy instruments clustered into relevant categories and publish them as "Energy Sufficiency Policy Database". This paper provides a description of the data clustering, the set-up of the database and an analysis of the policy instruments. A key insight is that sufficiency policy includes much more than bans of products or information tools leaving the responsibility to individuals. It is a comprehensive instrument mix of all policy types, not only enabling sufficiency action, but also reducing currently existing barriers. A policy database can serve as a good starting point for policy recommendations and modelling, further research is needed on barriers and demand-reduction potentials of sufficiency policy instruments.
Impact chains are used in many different fields of research to depict the various impacts of an activity and to visualize the system in which this activity is embedded. Research has not yet conceptualized impact chains specifically for energy sufficiency policies. We develop such a concept based on current evaluation approaches and extend these by adding qualitative elements such as success factors and barriers. Furthermore, we offer two case studies in which we test this concept with the responsible climate action managers. We also describe options for integrating these impact chains into different types of energy models, which are key tools in policy consulting.
The ambition to reach climate-neutral energy systems requires profound energy transitions. Various scenario studies exist which present different options to reach that goal. In this paper, key strategies for the transition to climate neutrality in Germany are identified through a meta-analysis of published studies, including scenarios which achieve at least a 95 % greenhouse gas emissions reduction by 2050 compared to 1990. It has been found that a reduction in energy demand, an expansion of domestic wind and solar energy, increased use of biomass as well as the importation of synthetic energy carriers are key strategies in the scenarios, with nuclear energy playing no role, and carbon capture and storage playing a very limited role. Demand-side solutions that reduce the energy demand have a very high potential to diminish the significant challenges of other strategies, which are all facing certain limitations regarding their sustainable potential. The level and and type of demand reductions differ significantly within the scenarios, especially regarding the options of reducing energy service demand.
Energy sufficiency is one of the three energy sustainability strategies, next to energy efficiency and renewable energies. We analyse to what extent European governments follow this strategy, by conducting a systematic document analysis of all available European National Energy and Climate Plans (NECPs) and Long-Term Strategies (LTSs). We collect and categorise a total of 230 sufficiency-related policy measures, finding large differences between countries. We find most sufficiency policies in the transport sector, when classifying also modal shift policies to change the service quality of transport as sufficiency policies. Types of sufficiency policy instruments vary considerably from sector to sector, for instance the focus on financial incentives and fiscal instruments in the mobility sector, information in the building sector, and financial incentive/tax instruments in cross-sectoral application. Regulatory instruments currently play a minor role for sufficiency policy in the national energy and climate plans of EU member states. Similar to energy efficiency in recent decades, sufficiency still largely referred to as micro-level individual behaviour change or necessary exogenous trends that will need to take place. It is not treated yet as a genuine field of policy action to provide the necessary framework for enabling societal change.
The expansion of photovoltaics in German cities has so far fallen short of expectations. The concept of "tenant electricity" ("Mieterstrom" in German), in which tenants of a building are supplied with solar power produced on site, offers great potential here. A study on behalf of the German Federal Ministry for Economic Affairs and Energy estimated the number of tenant households with good conditions for solar tenant electricity at 3.8 million. At the same time, the federal tenant electricity promotion scheme has been in place since 2017, but only about 1% of the annual budget has been claimed. The aim of this study is to identify the barriers for and drivers of diffusion of the tenant electricity model. To this end, a qualitative document analysis and a range of semi-structured expert interviews have been conducted. The theoretical framework used to guide the analysis is the multi-level perspective. The main barrier found for tenant electricity diffusion is the legal framework on the regime level, which also leads to high transaction costs of implementing tenant electricity. A social barrier is the inertia of some residents to actively concern themselves with their electricity supply and switch to a tenant electricity contract. Among its drivers are long-term trends such as the increasing electricity demand in urban areas, technical developments like blockchain technology and the increasing deployment of smart meters, and the EU Renewable Energy Directive. As long as the restrictive legal framework prevails, the further diffusion of tenant electricity will remain limited.
In order to calculate the financial return of energy efficiency measures, a cost-benefit analysis (CBA) is a proven tool for investors. Generally, however, most CBAs for investors have a narrow focus, which is - simply speaking - on investment costs compared with energy cost savings over the life span of the investment. This only provides part of the full picture. Ideally, a comprehensive or extended CBA would take additional benefits as well as additional costs into account. The objective of this paper is to reflect upon integrating into a CBA two important cost components: transaction costs and energy efficiency services - and how they interact. Even though this concept has not been carried out to the knowledge of the authors, we even go a step further to try to apply this idea. In so doing, we carried out a meta-analysis on relevant literature and existing data and interviewed a limited number of energy experts with comprehensive experience in carrying out energy services. Even though data is hardly available, we succeeded in constructing three real-world cases and applied an extended CBA making use of information gathered on transaction costs and energy services costs. We were able to show that, despite these additional cost components, the energy efficiency measures are economically viable. Quantitative data was not available on how energy services reduce transaction costs; more information on this aspect could render our results even more positive. Even though empirical and conceptual research must intensify efforts to design an even more comprehensive CBA, these first-of-its-kind findings can counterargue those that believe energy efficiency is not worth it (in monetary terms) due to transaction costs or energy services costs. In fact, this is good news for energy efficiency and for those that seek to make use of our findings to argue in favor of taking up energy efficiency investments in businesses.
Expenditure-based indicators of energy poverty : an analysis of income and expenditure elasticities
(2021)
Energy poverty is high up on national and European Union policy agendas. A number of possible indicators to measure the issue have been identified in the literature, but comparable data with European coverage is scarce. The EU Commission thus proposes four independent indicators on the "EU Energy Poverty Observatory" based on self-reported items from the pan-European surveys on income and living conditions (SILC) and household budgets (HBS). It is of increasing public interest to analyse social impacts of energy policies, and quantify energy poverty indicators also from modelling. This paper first shortly outlines how the expenditure-based indicators using HBS micro data may be directly linked to existing macroeconomic models through their defining variables (energy expenditure and income). As endogenous modelling based on micro data is difficult, the link may be country-specific elasticities. The main contribution of the paper is a systematic in-depth sensitivity analysis of the two indicators to changes in income and energy expenditure following varying patterns in the underlying distributions of the micro data. The results may be used by future soft links to models. The results display sometimes counterintuitive effects. We find that whether these indicators increase/decrease after a change of income or energy expenditure largely depends on the specific country-wise income and energy expenditure distribution between households on a micro-level. Due to their definition, the examined indicators are especially sensitive, when income changes alter the indicator threshold values, which in these cases are the median values in underlying distributions. We discuss these findings and relate them to several indicator shortcomings and potential remedies through changes in indicator definition.
The implementation of energy efficiency improvement actions not only yields energy and greenhouse gas emission savings, but also leads to other multiple impacts such as air pollution reductions and subsequent health and eco-system effects, resource impacts, economic effects on labour markets, aggregate demand and energy prices or on energy security. While many of these impacts have been studied in previous research, this work quantifies them in one consistent framework based on a common underlying bottom-up funded energy efficiency scenario across the EU. These scenario data are used to quantify multiple impacts by energy efficiency improvement action and for all EU28 member states using existing approaches and partially further developing methodologies. Where possible, impacts are integrated into cost-benefit analyses. We find that with a conservative estimate, multiple impacts sum up to a size of at least 50% of energy cost savings, with substantial impacts coming from e.g., air pollution, energy poverty reduction and economic impacts.
Energy sufficiency has recently gained increasing attention as a way to limit and reduce total energy consumption of households and overall. This paper presents both the partly new methods and the results of a comprehensive analysis of a micro- and meso-level energy sufficiency policy package to make electricity use in the home more sufficient and reduce at least the growth in per-capita dwelling size. The objective is to find out how policy can support households and their members, as individuals or as caregivers, but also manufacturers and local authorities in practicing energy sufficiency. This analysis needed an adapted and partly new set of methods we developed. Energy sufficiency does not only face barriers like energy efficiency, but also potential restrictions for certain household members or characteristics, and sometimes, preconditions have to be met to make more energy-sufficient routines and practices possible. All of this was analysed in detail to derive recommendations for which policy instruments need to be combined to an effective policy package for energy sufficiency. Energy efficiency and energy sufficiency should not be seen as opposed to each other but work in the same direction - saving energy. Therefore, some energy sufficiency policy instruments may be the same as for energy efficiency, such as energy pricing policies. Some may simply adapt technology-specific energy efficiency policy instruments. Examples include progressive appliance efficiency standards, standards based on absolute consumption, or providing energy advice. However, sufficiency may also require new policy approaches. They may range from promotion of completely different services for food and clothes cleaning, to instruments for limiting average dwelling floor area per person, or to a cap-and-trade system for the total electricity sales of a supplier to its customers, instead of an energy efficiency obligation.
The economic assessment of low-carbon energy options is the primary step towards the design of policy portfolios to foster the green energy economy. However, today these assessments often fall short of including important determinants of the overall cost-benefit balance of such options by not including indirect costs and benefits, even though these can be game-changing. This is often due to the lack of adequate methodologies.
The purpose of this paper is to provide a comprehensive account of the key methodological challenges to the assessment of the multiple impacts of energy options, and an initial menu of potential solutions to address these challenges.
The paper first provides evidence for the importance of the multiple impacts of energy actions in the assessment of low-carbon options.
The paper identifies a few key challenges to the evaluation of the co-impacts of low-carbon options and demonstrates that these are more complex for co-impacts than for the direct ones. Such challenges include several layers of additionality, high context dependency, and accounting for distributional effects.
The paper continues by identifying the key challenges to the aggregation of multiple impacts including the risks of overcounting while taking into account the multitude of interactions among the various co-impacts. The paper proposes an analytical framework that can help address these and frame a systematic assessment of the multiple impacts.
The paper presents the results of an ex-ante evaluation of the economy-wide benefits that may be achieved through the implementation of the 20-year Energy Efficiency Action Plan (EEAP) in Thailand. The objective of the EEAP is to reduce energy intensity by 25 % in 2030 compared to 2010. This is to be reached by reducing the projected energy consumption by 20 % or 38 Mtoe until 2030. We have specified an analytical framework, which allows for a calculation of the overall energy cost savings, energy import cost reductions and reduced CO2 emissions. Moreover, we calculated the induced energy efficiency investments, employment effects and impacts on governmental budget. The evaluation shows that an effective implementation of the plan may lead to a reduction in energy expenditure of 37.7 billion EUR by 2030. Moreover, the EEAP-induced energy savings will significantly reduce the greenhouse gas emissions as well as Thailand’s energy import costs and generate private investment in energy efficiency of about 5 billion EUR annually in 2030, which in turn may lead to about 300,000 new jobs. The size of the net impact of the plan on Thailand’s governmental budget is uncertain due to positive and negative effects on corporate and income tax revenues, expenses for unemployment benefits, governmental energy consumption, expenses for energy subsidies and energy tax income.
The European electricity market is linked to a carbon market with a fixed cap that limits greenhouse gas emissions. At the same time, a number of energy efficiency policy instruments in the EU aim at reducing the electricity consumption. This article explores the interactions between the EU's carbon market on the one hand and instruments specifically targeted towards energy end-use efficiency on the other hand. Our theoretical analysis shows how electricity demand reduction triggered by energy efficiency policy instruments affects the emission trading scheme. Without adjustments of the fixed cap, decreasing electricity demand (relative to business-as-usual) reduces the carbon price without reducing total emissions. With lower carbon prices, costly low emission processes will be substituted by cheaper high emitting processes. Possible electricity and carbon price effects of electricity demand reduction scenarios under various carbon caps are quantified with a long-term electricity market simulation model. The results show that electricity efficiency policies allow for a significant reduction of the carbon cap. Compared to the 2005 emission level, 30% emission reductions can be achieved by 2020 within the emission trading scheme with similar or even lower costs for the industrial sector than were expected when the cap was initially set for a 21% emission reduction.