The South African government started the development of a basic energy efficiency policy framework in 2005, including a voluntary label for refrigerators. This initial label was the intended precursor to a mandatory standards and labelling (S&L) programme, but the impacts achieved were only very limited. Based on this first experience, the South African Bureau of Standards (SABS) formed in 2008 a working group for the development of the new and more specific South African National Standard SANS 941. This standard identifies energy efficiency requirements, labelling and measurement methods as well as the maximum allowable standby power for a set of appliances as reliable basis for introducing a mandatory regulation. Nevertheless, due to many existing barriers, such as lack of funding and low priority assigned to the initiative, a very long period passed by between the S&L planning and final policy implementation. Finally, in November 2014, the South African government published mandatory performance standards coming into force in 2015/2016 for a first set of appliances consisting of refrigerators, washing machines, dryers, dishwashers, electric water heaters, ovens, A/C and heat pumps. To analyse the effectiveness of the new S&L programme and the potential influence of delays in the implementing process, the authors performed an immediate first-hand evaluation of the new policy.
As analytical reference base for available energy efficiency potentials, results from bottom-up scenario calculations will be presented exemplarily as case study for cold appliances covered by the S&L programme. A retrospective market study will show market trends before policy implementation and compare results with the new mandatory requirements. For the further policy analysis, a programme theory approach will be applied, in order to better understand why, how and under what conditions the policy works. Relationships with other energy efficiency policies and measures as well as positive or negative effects will be described. Furthermore, cause-impact relationships will be analysed to explain the functioning of the policy. Finally, success and failure factors will illustrate what needs to be done to achieve the desired energy efficiency targets. Henceforth, even though this study does not assess the direct transferability of the South African S&L programme to other regions, its findings could be relevant and useful for countries planning the implementation of similar policies.
Human nutrition is responsible for about 30% of the global natural resource use. In order to decrease resource use to a level in line with planetary boundaries, a resource use reduction in the nutrition sector by a factor 2 is suggested. A large untapped potential to increase resource efficiency and improve consumers' health status is assumed, but valid indicators and general guidelines to assess these impacts and limits can barely be found. Therefore we will have a try to define sustainable limits towards the individuals' daily diet and therefore stimulate current available scientific debate.
Within the paper an examination of existing indicators and assessment methods is carried out. We set the focus on health indicators, such as energy intake, and environmental indicators, such as the carbon or material footprint. The paper aims to provide first, an assessment of core indicators to explore the sustainability impact of foodstuff, and second, a deeper understanding and a discussion of sustainable limits for those dimensions of food and nutrition. Therefore we will discuss several ecological and health indicators which may be suitable to assess the sustainabilty impact and indicate differences or similarities. As a result it becomes obvious that several ecological indicators "point in the same direction" and therefore a discussion about the variability and the variety of these indicators has to be faced in the future. Further the definition of sustainable levels per indicator is an essential aspect to get an idea about the needed barriers for a sustainable nutrition, by now first steps had been made, but no binding guidelines are available yet. Therefore the paper suggests a few indications to set up sustainable levels for health and environmental indicators, based on the idea to reduce the resource use level up to 30-50% in 2030.
The international governance landscape on climate change mitigation is increasingly complex across multiple governance levels. Climate change mitigation initiatives by non-state stakeholders can play an important role in governing global climate change and contribute to avoiding unmanageable climate change. It has been argued that the UNFCCC could and should play a stronger role in "orchestrating" the efforts of these initiatives within the wider climate regime complex and thus inspire new and enhanced climate action. In fact, the Lima-Paris Action Agenda supporting cooperative climate action among state and non-state actors was supposed to be a major outcome of COP21.
There is little doubt that successful mitigation initiatives can create a momentum for climate protection. What is missing, is a systematic analysis of how this momentum can feed back into the UNFCCC negotiation process, inspiring also enhanced and more ambitious climate mitigation by states in future iterations of the cycle of nationally determined contributions under the Paris Agreement. This paper aims to close this gap: building on a structurational regime model, the article [1] develops a theory of change of how and through which structuration channels non-state initiatives can contribute to changing the politics of international climate policy; [2] traces existing UNFCCC processes and the Paris Agreement with a view to identifying entry points for a more direct feedback from non-state initiatives; and [3] derives recommendations on how and under which agenda items positive experiences can resonate within the UNFCCC negotiation process.
Wärmewende im Quartier
(2016)
Die Wärmewende ist als Teil der Energiewende ein gesellschaftliches Großprojekt. Für eine erfolgreiche Umsetzung benötigt die Wärmewende im Vergleich zur Stromwende vielfältigere und differenziertere Handlungsmechanismen. Es geht dabei nicht nur um den Ersatz fossiler Energieträger im Bereich der Wärmeversorgung durch regenerative Quellen, sondern vielmehr um einen systemischen Ansatz, der zudem eine stringente Forcierung von Energieeffizienzmaßnahmen, eine optimierte Verzahnung von Strom- und Wärmesystemen sowie eine zielgruppenspezifische Adressierung und Sensibilisierung von Akteursgruppen (hier: Kommunen, Privathaushalte, Industrie, GHD) erforderlich macht.
Im Rahmen der Energiewende haben sich erneuerbare Energien zur Stromerzeugung in Deutschland bereits etabliert. Um jedoch das volle Potenzial der Reduktion von fossilen Energien und Treibhausgasen (THG) auszuschöpfen, muss aus der Energiewende auch eine Wärmewende werden. Der Energieeinsatz für die Wärmebereitstellung der Industrie betrug im Jahr 2012 etwa 535 TWh (22 % des Endenergiebedarfs Deutschlands), hauptsächlich bereitgestellt durch Erdgas (48 %) und Steinkohle (17 %) 1. Damit wurden für die Wärmebereitstellung im Industriesektor rund 159 Mio. t CO2-äq emittiert, was 17 % der THG-Emissionen Deutschlands entspricht.
Aufgrund der Vielseitigkeit der einzelnen Branchen und Wärmeanwendungen im Industriesektor kann dieser Beitrag nur beispielhaft einzelne Komponenten für eine Wärmewende aufzeigen, die auch wiederum die Aktivitäten der einzelnen Autoren widerspiegeln. Ausgehend von einer nationalen Betrachtung und expliziten Modellierungsergebnissen für die energieintensive Industrie in NRW, werden einzelne Potenziale und Aktivitäten im Bereich der Wärmebereitstellung, -speicherung und -integration behandelt.
Als Beitrag zu einer fundierten Diskussion über adäquate Politikinstrumente in der Wärmewende hat der FVEE mit seinen Mitgliedsinstituten im September 2015 ein Positionspapier erstellt: "Erneuerbare Energien im Wärmesektor - Aufgaben, Empfehlungen und Perspektiven". Dieses gibt einen umfassenden Überblick über die Herausforderungen und Handlungsoptionen im Wärmesektor und bietet damit eine wichtige Orientierung bei der Gestaltung der Energiewende.
Um die Energiewende erfolgreich umzusetzen, plädiert der FVEE für eine deutliche Stärkung des Wärmesektors in der Energiepolitik und eine entschiedene und langfristig angelegte Politik der Wärmewende, die den besonderen Anforderungen des Wärmesektors gerecht wird. Im vorliegenden Beitrag werden ausgewählte Analyseergebnisse und Empfehlungen des Positionspapiers vorgestellt.
Die Transformation des Energieversorgungssystems zu einer dekarbonisierten Energiebereitstellung bedingt ein koordiniertes Zusammenspiel der Sektoren Strom, Wärme und Verkehr. Dabei ist die Kopplung des Stromsektors mit dem Wärmesektor eine der entscheidenden Maßnahmen bei der Transformation. Die Aufnahme von Wind- und Sonnenenergie in das Netz kann durch genaue Einspeiseprognosen optimiert werden, die Kopplung zum Wärmesektor mittels Wärmepumpen und Power-to-Heat (Heizstab) ermöglicht die weitere Flexibilisierung der Nachfrageseite. Diese Interaktion wird durch intelligente Lösungen der Systemtechnik für das Energie- und Netzmanagement ermöglicht. Die Entwicklung von entsprechenden Anreizsystemen, Marktmechanismen und Geschäftsmodellen ist ebenfalls erforderlich, um diese Kopplung auch wirtschaftlich erfolgreich zu gestalten. Der Beitrag stellt das im Forschungsvorhaben "Interaktion EE-Strom, Wärme und Verkehr" erstellte 80-Prozent-Szenario für das Jahr 2050 vor und zeigt anhand von Beispielen zukünftige Anforderungen und Entwicklungen zu dieser Thematik auf.
National policies for resource efficiency and waste management : structures, impacts, and deficits
(2015)
De-industrialization, climate and demographic changes are only a few key words that indicate the challenge of urban development in many industrialized countries for the coming decades. A fundamental transformation of infrastructure and the built environment is expected to adjust to future needs. Numerous concepts of integrating efficiency and renewable energy sources into urban planning were elaborated in recent years. Energy sufficiency in the meaning of voluntary demand reduction of energy intensive goods and services is the third and mostly forgotten pillar of sustainable development. However, organizational and spatial measures are needed to support behavior modification. This paper presents results of a transdisciplinary research design with local stakeholders and scientific experts to develop an understanding of what energy sufficiency might contribute to sustainable urban development. Based on the Multi-Level-Perspective of the transition research approach, it analyzes how stakeholders and experts define energy sufficiency structures for the shrinking district of Vohwinkel (Germany). The paper also shows a compilation and evaluation of measures which facilitate energy sufficient behavior in the fields of space heating and passenger transport on a local level. The methodological concept comprises expert interviews, thought experiments with stakeholders to develop a vision of an "energy sufficient Vohwinkel 2050" as well as a stakeholder workshop to discuss the results. A shrinking population is seen as a chance to actively adapt the built environment to foster energy sufficiency.
Energy systems with high shares of renewable electricity are feasible, but require balancing measures such as storage, grid exchange or demand-side management to maintain system stability. The demand for these balancing options cannot be assessed separately since they influence each other. Therefore, a model was developed to analyze these mutual dependencies by optimizing a concerted use of balancing technologies. This model is presented here. It covers the European electricity system in hourly resolution. Since this leads to a large optimization problem, several options for reducing system complexity are presented. The application of the model is illustrated with a case study outlining the effects of pumped hydro storage and controlled charging of electric vehicles in central Europe.
Questions regarding the societal impact of research, how to reach impact and what is needed to stabilize the effects are rising from various sides. Societal impact is seen as part of a social contract that exists between science and society. This entails that research must address pressing social issues which in turn implies a number of core challenges such as gathering evidence or the creation of actionable knowledge. The transdisciplinary research approach "real-world laboratory" is discussed as possible way to address and to overcome some of the challenges. A "real-world laboratory" currently being established in the city of Wuppertal serves as case study, linking conceptual and empirical investigations.
"Sufficiency" is beginning to emerge as a new value throughout Western societies and the question asked in this article is: Can we observe cases with actual opportunities to link successful business strategies of incumbents to principles of sufficiency? Thus, how feasible is sustainable entrepreneurship for incumbents? As an innovative conceptual approach, it will be analyzed how brand claims function as narrative translation mechanisms in situations where tensions emerge between corporate narratives and unexpected societal trends, e.g. the emergence of sufficient lifestyles. It will be shown that even though these are still a niche phenomenon, a focus on powerful brands and the narratives connected to them are an important element in understanding the role of incumbents in transitions to sustainability.
Small-scale residential biomass combustion for space heating and warm water production already holds a considerable share on overall energy production from biomass in Europe. In the existing regulative framework of EU air quality and climate protection targets, an extended usage of renewable biomass heating without an increase of harmful emissions is urgently needed. In this context, the FP7 project "EU-UltraLowDust" (ULD) aimed at the demonstration of highly efficient and ultra-low emission small-scale biomass combustion technologies and the development of supporting policy recommendations.
New combustion technology operating at almost zero particulate matter (PM) emissions has been demonstrated, rivalling even the performance of state-of-the-art natural gas fuelled systems. In this context, the authors analysed EU policy options for a faster diffusion of these new innovative technologies. The analysis presented in this paper is based on results from an original impact assessment with special focus on energy efficiency and emission scenarios, including the potential effects of a broad deployment of the new ULD technologies as well as the early replacement of poor performing existing installations.
As the derived results show that major shares of energy consumption and emissions from residential biomass combustion in the EU are caused by old heating systems, specific policy measures for new and existing installations have been analysed. Following this, a recommended and harmonized policy package for new Small Combustion Installations (SCI) to be put on the market as well as for existing SCI in the stock has been developed, which will be presented in this paper. The basic policy package addresses new installations and consists of a two-step approach, aiming at enhancing the current and forthcoming policies addressing the SCI market in Europe. A complementary second policy package for existing installations aims specifically at the early replacement of SCI already installed in the stock, which are characterized by low efficiency and high emissions.
Investments in urban transport should deliver the maximum economic, social and environmental benefits; in times of constrained budgets, projects' economic viability is often the deciding factor. This paper discusses the current practices and challenges facing cities in assessing urban transport interventions. On this basis, it develops options for decision-makers to appraise small-scale, sustainable urban transport policy measures.
The analysis of current appraisal practice shows that data requirements and complexity are cities’ main obstacles appraising projects and comparing potential alternatives. Additionally, there is often a risk that project appraisal enters the planning process too late to play any meaningful role. Conducting a Cost-benefit
analysis (CBA) ex-ante is often only approved if the implementation of the measure in question is already likely. Often, a CBA is a means to access funds rather than a basis for decision-making. Project appraisal of small-scale and non-infrastructure-based measures is often simply too expensive.
On the basis of these findings, the paper discusses the following alternatives to comprehensive CBAs: 1) learn from others, 2) use a simplified assessment method, 3) rely on norms and values. All of these options aim to cope with the trade-off between effort and certitude. In practice, some policy-makers may already apply one or more of these options, but this has not been documented in a systematic manner. A systematic documentation of such practices could be a major step forward for implementation of sustainable and integrated urban transport projects, as it would shed some light on the reasoning behind decisions, from which conclusions could be drawn on the likely follow-on effects thereof and also possible improvements to the process.
Jordan's electricity system has and continues to experience considerable pressures for reform due to continuous increase of electricity demand combined with high dependency on imported fossil fuels and a partially subsidised electricity market. In this paper we use the transitions pathways to examine and analyse pressures on the regime in relation to plausible future developments of particular niches such as renewable energy technologies. Our analysis is methodologically distinct in that we explicitly identify mechanisms operating in the system and relate those to existing scenarios to assess future developments. Currently, we see future developments being sensitive to the actions of key regime actors.
The electric utility sector in Australia, Germany and the U.S. are all going through major changes driven by declining sales, increasing use of distributed energy sources and policy responses to global climate change. This paper discusses efforts in each of these countries to reform their electric industries, address climate change and promote energy efficiency. Going forward, we see a role for government, utilities and private market energy efficiency efforts in all three countries, although the emphasis will vary by country and will evolve over time. Where all three parties can work together with a common vision, reform efforts are likely to be more successful and more sustained. In all three countries the future is uncertain. In the face of this uncertainty, energy efficiency supporters need to keep abreast of these changes, and find more flexible and nimble policy strategies for energy efficiency to prosper, as the future is likely to unfold in unexpected ways.
Energy efficiency of a range of domestic appliances covered by the labelling and ecodesign directives has improved significantly over the last 15 years. However, the power consumption of the German residential sector has remained relatively constant over this period. Besides other factors, such as decreasing average household size, the main reasons for this development were the increases of the types, features, size, equipment stock and usage times of appliances and devices in private households.
The project "Energy Sufficiency - strategies and instruments for a technical, systemic and cultural transformation towards sustainable restriction of energy demand in the field of construction and everyday life" investigates how the complementation of energy efficiency with energy sufficiency could lead to more user adequate domestic products and product-service systems and thereby result in an absolute reduction of power consumption.
In this project, energy sufficiency is defined as a strategy to reduce energy consumption by three approaches:
1. Quantitative reduction of sizes, features, usage times of devices etc.
2. Substitution of technical equipment in households by e.g.urban services.
3. Adjustment of technical services delivered by appliances toutility needed and desired by users.
The energy saving effects of an application of these approaches were modelled for different types of households and the energy saving potentials of energy sufficiency quantified. Innovative approaches for user adequate products and services were developed in open innovation workshops by the Design Thinking method. The paper summarizes some of the intermediate results of theoretical and transdisciplinary investigations of the project that runs until May 31, 2016. Furthermore, a first set of design criteria for user adequate appliances enabling energy sufficiency are developed based on these results. The paper concludes with suggestions for the future development of energy labelling and ecodesign derived from the design criteria and supplemented by examples of existing requirements according to the voluntary environmental label "Blauer Engel".
The efficiency strategy to exploit the potential for energy savings in buildings still is applied rather slowly in most countries. In addition, there are indications that energy savings are partly compensated particularly by wealth but also rebound effects, the "empty nest" (persistence of elderly people and couples in family homes), and cohort effects (e.g. vintages of people or buildings). In Germany, as in other European countries, the existing trend in housing is a continuously growing floor space per capita. Over the last decades it expanded from about 20 m2 in 1960 to currently 45 m2 per person. Forecasts expect a further increase to more than 50 m2 per person. Obviously, more floor space needs more energy for space heating and cooling, ventilation, and lighting, but it also allows the household to operate more and or bigger appliances, all of which increase energy consumption.
On the other hand, housing projects emerge offering relatively small private living spaces in combination with various shared spaces to use. Many of them are based on private initiatives. But what is the motivation behind it? And is there a higher need for new living concepts in the future?
The proposed paper presents main drivers of increasing floor space per capita in Germany and discusses the question if more space is necessary for higher comfort. It presents different examples of housing concepts that strive to achieve good living with less space and suggests a "building typology of sufficiency".
Finally, the paper discusses qualitatively to which extent these housing concepts can lead to less energy use and emissions. In this way sufficiency could be best friend with efficiency and tackle wealth, rebound, and other effects that counter-act efficiency progress. But therefore, as the paper concludes, politics and policies should recognise sufficiency as a field of action instead of referring to individual decisions and lifestyles.
Energy sufficiency policy : an evolution of energy efficiency policy or radically new approaches?
(2015)
In the last four decades, energy efficiency increased significantly in OECD countries. However, only during the most recent years, total energy consumption started to decrease a little, and much more slowly than energy efficiency potentials would suggest. Energy sufficiency has therefore gained new attention as a way to limit and reduce total energy consumption of a household or a country overall.
The project "Energiesuffizienz" funded by the German ministry for research has examined what energy sufficiency actually is, and what householders, household members but also manufacturers and local authorities could do to make electricity use in the home more sufficient. The focus of this paper is the policy part of the project - the first comprehensive analysis of an energy sufficiency policy.
The objective is to find out how policy can support market actors in using the energy sufficiency options identified. As for energy efficiency policy, it starts with the gathering of potential sufficiency actions and the analysis of the relevant barriers all market actors face, to derive recommendations for which policy instruments need to be combined to an effective policy package, and which other pre-conditions have to be met. Energy efficiency and energy sufficiency should not be seen as opposed to each other but work in the same direction - saving energy. Therefore, some instruments of the energy sufficiency policy package may be the same as for energy efficiency - such as energy taxation, and linear or progressive energy prices. Some may simply adapt technology-specific energy efficiency policy instruments. Examples are progressive appliance efficiency standards, standards based on absolute consumption, or providing energy advice. However, sufficiency may also require radical new approaches particularly to mitigate the drivers of non-sufficiency. They may range from promotion of completely different services for food and clothes cleaning, to instruments for limiting average dwelling floor area per person, or to a cap-and-trade system for the total electricity sales of a supplier to its customers, instead of an energy efficiency obligation. The paper presents these and other elements of an integrated energy sufficiency policy package resulting from this analysis.
The overall objective of the web-based consumer information tool Euro-Topten is to promote the market transformation towards energy efficient products. Euro-Topten informs consumers about the most energy efficient products in various categories and thereby aims to directly influence the purchasing decisions of individuals or professional buyers.
Providers of internet-based information tools are confronted with the problem, that there is no bidirectional interaction with the users. Hence, it is difficult to evaluate if the specific needs of users are addressed, if and how the user processes this information and to what extent the information influences the user's decision making process.
To study these questions, a web-based survey was conducted in two consecutive rounds. In the first round the survey focused on the assessment of the information tool itself and the motivation for using the Euro-Topten websites. This survey was online on all active Euro-Topten partner websites from October to December 2012. In total, 1791 users completed the survey.
In the second round, a subset of the survey population was queried again. 1,043 participants agreed to take part in a more comprehensive follow up survey, 383 completed the second survey between May and July 2013. The second survey concentrated on the question how Euro-Topten has influenced the purchasing behaviour of the survey participants. This gave significant insights on how the information on the Euro-Topten websites has affected purchasing decisions of the surveyed users.
Based on a comparison of performance indicators of the most efficient products recommended on the Euro-Topten websites with performance indicators of a base case product available on the market, avoided energy demand could be estimated for those users, who bought products from the Euro-Topten list. Based on these results, two impacts of Euro-Topten could be estimated: The influence of Euro-Topten on purchasing decision of users and the associated reductions in energy demand and CO2-emissions.
After a wave of privatizations in the end of the 1990s, the electrical power supply of many municipalities in Germany has been returned into public hands. Many municipalities discover chances and possibilities for local action, which arise with remunicipalisation. The local policy-makers realize that remunicipalisation offers the opportunity of implementing an independent energy policy at local level which is critical in creating a transformation to a sustainable energy system based on energy efficiency and renewable energies. The municipal ownership allows a strong governance towards more political influence in the local energy market. In addition, there is a clear opinion of the population: 81 % of citizens surveyed say they trust their local municipal utility, compared to only 26 % who say they trust corporations (VKU-Survey, 2010). In summary, there are many good reasons for local politicians to establish their own municipal utilities. The payback for municipalities is tangible when the local utility focuses on reliably providing affordable energy rather than on increasing its returns. The new municipal power utilities stimulate competition and contribute to the renewal / restructuring of the traditional energy market.
The founding of 72 municipal utilities since 2005 leads us to ask for the reasons. The study reviews the German trend towards municipal ownership of local utilities, assessing their performance based on 10 targets related to the energy transition, climate protection, and the local economic impact: 1. Achieving environmental objectives and organization of the local "Energiewende". 2. Higher local added value. 3. Harnessing tax regulations for improving municipal services. 4. Improving the income situation of the city. 5. Democratization of supply and stronger orientation towards the common good (public value). 6. Creating and protecting good jobs. 7. Acting in social responsibility in energy supply. 8. Expansion of eco-efficient energy services. 9. Harnessing customer relations and public image. 10. Materialising synergies with other sectors.
Based on expert opinions, the study finds out that the likelihood of these targets being reached is "high to very high". The aim of this article is to provide a compact and basic understanding of the possible reasons for the phenomenon of remunicipalisation.
Die Transformation des deutschen Energiesystems in Richtung signifikanter Reduktion energiebedingter CO2-Emissionen kann durch eine Abfolge verschiedener Phasen beschrieben werden. Phasenübergänge ergeben sich dabei aus strukturellen Erfordernissen im Gesamtsystem bei kontinuierlichem weiteren Ausbau erneuerbarer Energiewandler, insbesondere Sonne und Wind. Die anstehende zweite Phase der Transformation ist durch eine umfassende Systemintegration volatiler erneuerbarer Energien insbesondere im Bereich der Strombereitstellung geprägt. Dies erfordert sowohl eine flexible komplementäre Erzeugung als auch die Aktivierung von Flexibilitätsoptionen auf der Verbrauchsseite.
Die Energiewende stellt einen ambitionierten und zugleich hochkomplexen Transformationsprozess dar. Der vorliegende Artikel stellt acht Thesen auf, die dabei helfen können, die Herausforderungen besser zu verstehen und Ansatzpunkte für zukünftiges Handeln zu identifizieren sowie Forschungsbedarf aufzuzeigen.
Technologische Innovationen in den Bereichen erneuerbare Energien und Energieeffizienz bilden eine wesentliche Grundlage der weltweiten Energiesystemtransformation und wirken bei geeigneter Implementierung als Wertschöpfungsmotor. Die Größe und erhebliche Wachstumsdynamik der internationalen Märkte für Energietechnologien und -systeme macht die Positionierung deutscher Unternehmen auf diesen Märkten daher zu einem Thema von sehr weitreichender wirtschaftspolitischer Relevanz. Daraus ergibt sich die Frage, wie Deutschland von einer konsequenten Umsetzung der Energiewende und seiner damit verbundenen Vorreiterfunktion auf den internationalen Märkten für Energietechnologien profitieren kann.
Nach einer langen Phase der Stabilität ist die Stromwirtschaft in den vergangenen 15 Jahren stark in Bewegung geraten. Zunächst stand der Wechsel von staatlich überwachten und regulierten Gebietsmonopolen hin zu liberalisierten Erzeuger- und Verbrauchermärkten an. Im Moment befinden wir uns in einem ähnlichen Umbruch, weg von konventioneller hin zu erneuerbarer Energieerzeugung.
Im vorliegenden Beitrag soll der Leitfrage nachgegangen werden, ob die Paradigmen der einzelnen Phasen miteinander vereinbar sind, welche noch immer ihre Daseinsberechtigung haben und welche modifiziert werden sollten.
Die Akteurswende
(2015)
Die zunehmende Abkehr vom ursprünglichen EEG-Vergütungssystem mit einer festen Einspeisevergütung hin zu einer mehr und mehr marktorientierten Ausrichtung führt zu der Frage, ob die Umstrukturierung des EEG am Ende zu einer neuen Phase der Energiewende führt, der Neo-EEG-Phase.
Im vorliegenden Artikel werden die Veränderungen und Entwicklungsphasen des EEG mit besonderem Blick auf die Akteure des Stromsystems analysiert. Im Kontext der Energiewende können die zu beobachtenden und teils deutlich einschneidenden Veränderungen für alle Akteure des Systems durchaus als "Akteurswende" verstanden werden.
Die Energiewende in Deutschland ist ein seit Jahren viel diskutiertes Thema. Neben dem Wandel der Energieerzeugungssysteme hin zu regenerativen Energiequellen muss auch eine Steigerung der Energieeffizienz stattfinden. Nur durch Adaption beider Seiten der Erzeugung als auch des Verbrauchs, lassen sich die Herausforderungen meistern.
Neuerdings ist es wieder "hoffähig" geworden, von Suffizienz zu sprechen. Das ist auch gut so, denn die gewünschte Energiewende schreitet mit Sicherheit schneller und zielstrebiger voran, wenn Suffizienz-, Effizienz- und Konsistenzstrategien zusammenwirken. Neben den notwendigen technischen Veränderungen ist aber auch eine sozial-kulturelle Transformation erforderlich.
Michael Kopatz beschreibt den Weg zur Suffizienz anhand eines Wohnflächen-Moratoriums.
Während der gesamten Dauer seines Lebens ist der Mensch beständig mit dem Phänomen "Knappheit" konfrontiert. Er muss essen, trinken, sich vor den Unbilden der Natur schützen - und das unter widrigen Bedingungen wie Kälte und Hitze oder beschränkter Nahrungsverfügbarkeit in vielen Regionen der Erde. Vor diesem Hintergrund der "Knappheit" hat die Menschheit jedoch beeindruckende Zivilisationsleistungen vollbracht: die Entwicklung der Landwirtschaft seit dem Neolithikum, die Gründung von Städten, den Aufbau industrieller Produktion ab dem späten 18. Jahrhundert. Mit jedem Schritt entstanden dabei neue Erfahrungen von Fülle, im Sinne von materiellem Reichtum, aber auch von wachsendem Bewusstsein für die nichtmateriellen Faktoren, die ein erstrebenswertes Leben auszeichnen, z. B. Bildung, Kultur und gesellschaftliche Teilnahme.
Uwe Schneidewind definiert Suffizienz und erläutert die Hintergründe.
The role of gender concerns in the planning of small-scale energy projects in developing countries
(2014)
Techno-economic feasibility study of solar and wind based irrigation systems in Northern Colombia
(2014)
Water pumping systems powered by solar and wind energy are a clean, decentralized and economic alternative for the irrigation of crops. The intense droughts experienced in the last years in Northern Colombia due to particularly strong Nino Phenomena have reactivated the need of reliable water pumping irrigation systems in that region. This study aims to assess the techno economic feasibility of solar and wind based pumping irrigation system, taking as case study the Municipality of Piojo in the Atlantico department. In the first stage of the study the irrigation water requirements were determined by using the software CROPWAT based on two different crop patterns that represent existing feasible alternatives for small farmers of the region: i) a common crop pattern, which represent the current average distribution of crops for subsistence farming and ii) a fruit cash crop pattern that comprises crops for which well established markets in the region exist. Solar wind and diesel based pumping systems were sized based on the crop water demands for 1 ha. The unit irrigation costs of the three technologies, the two crop patterns and the three irrigation methods (surface, sprinkler and drip) were calculated and compared. The economical analysis was complemented with a cost-benefit analysis over 20 years. Our results show that both renewable energy based pumping systems (wind and solar) can cover the irrigation water demands of small farmers in the region. The economical analysis shows that windmills are the most cost effective solution followed by the solar pumping system. Diesel pumping system was the less cost effective, even though it does not comprise investment in water storage tank. The cost benefit analysis demonstrates that any irrigation system is financially unfeasible when providing water to a common crop pattern. In case of the fruit cash crop scenario the highest dividends were obtained by the wind pumping system and the lowest dividends by the diesel pumping system. The lowest payback period was obtained by the windmill after 7 years and could be even feasible after the fifth year if the surplus water would be used to irrigate larger areas. Dividends obtained in a fruit cash crop scenario with irrigation after 20 years were in the range of EUR 5200 and EUR 11200 higher than dividends obtained by the same crop pattern but without irrigation.
This paper draws upon an extensive transdisciplinary scenario development in the context of the stakeholder oriented preparation of the climate protection plan of the German federal state North Rhine-Westphalia, which is home to the most important heavy industry cluster in Europe. In that context we developed differentiated bottom up climate change mitigation strategies and scenarios for the major energy intensive industries aluminium, iron and steel, cement, lime, paper and steam cracker for olefin production together with representatives of industry as well as society.
In the light of the tremendous challenges facing the energy systems of the Middle East and North Africa (MENA), a number of concepts, roadmaps and scenario studies have emerged, describing potential transformation pathways towards a more sustainable, renewable-based, energy supply future in the region. Our article uses the scientific approach of "transition research" to analyze the most pertinent publications and concepts in this field to identify the key drivers and barriers for the transformation of the regional energy systems. The analysis likewise includes an assessment of possible indicators and indexes that can be used to monitor the sustainability of the transformation process of MENA energy systems.
Eine zukünftige Herausforderung der Energiewende wird darin bestehen, zunehmende Stromnetzeinspeisungen von fluktuierenden erneuerbaren Energien (FEE) in das Energiesystem zu integrieren. Neben den Flexibilitäten im Stromsystem sollten dabei auch die Möglichkeiten des Wärmemarktes zur Stabilisierung des Strommarktes berücksichtigt werden. So können Kraft-Wärme-Kopplungs-Anlagen (KWK), Elektroheizer und Wärmepumpen als Verbindungstechnologien zwischen Strom- und Wärmemarkt abhängig vom FEE-Dargebot und damit auch den Preissignalen des Strommarktes zu- bzw. abgeschaltet werden. Dazu werden Wärmespeicher benötigt, da die Flexibilisierung nur möglich ist, wenn die Produktion von der Wärmenutzung entkoppelt werden kann. Eine besonders aussichtsreiche Kopplung von Strom- und Wärmemarkt ist im Bereich der Fernwärmesysteme möglich, da sich hier große Energiemengen in Fernwärmespeichern im Vergleich zu dezentralen Lösungen kostengünstiger und effizienter speichern lassen.
Die Wahrung der Systemsicherheit muss perspektivisch von konventionellen Kraftwerken auf regenerative Energien und Kraft-Wärme-Kopplungsanlagen (KWK) verlagert werden. Diese sollen zukünftig Systemdienstleistungen übernehmen, um in zunehmendem Maße fluktuierende erneuerbare Energien (FEE) zu integrieren. Deutschland strebt an, im Jahr 2020 ein Viertel der elektrischen Energie aus KWK-Anlagen zu erzeugen. Damit werden diese Anlagen einen wesentlichen Teil der regelbaren Stromerzeugung ausmachen. Insbesondere die Erzeugung in dezentralen Blockheizkraftwerken (BHKW) wird zunehmen. Vor diesem Hintergrund stellt sich die Frage, ob dezentrale Anlagen überhaupt nennenswert zur Systemstabilität beitragen können.
Improving material efficiency in the manufacturing industry is a sustainability imperative for companies due to economic and environmental advantages such as the reduction of material costs and resource use. Innovative solutions in terms of material efficiency measures are diverse and widespread. As a systematic assessment of efficiency approaches and their effects are likely to support dissemination and deployment, this paper aims to develop an approach that helps to classify material efficiency measures. The classification approach presents different dimensions and properties of material efficiency measures based on a literature analysis regarding existing classification approaches as well as on work that has been conducted for the Eco-Innovation Observatory. The classification has been designed as basis for an empirical impact assessment of material efficiency measures based on a data sample that stems from the German Material Efficiency Agency.
Wasserelektrolyse und regenerative Gase als Schlüsselfaktoren für die Energiesystemtransformation
(2013)
Erneuerbare Energien und Energieeffizienz : Systemlösungen als Schlüsselelement der Energiewende
(2013)
Erneuerbare Energien und Energieeffizienz sind die Schlüsselstrategien für die Umsetzung einer klimaverträglichen Energieversorgung in Deutschland und weltweit. Dieser Beitrag soll die Kopplung zwischen erneuerbaren Energien und Energieeffizienz im Kontext von Systemlösungen aufzeigen. Diese Systemlösungen sollten schon sehr frühzeitig und systematisch im Kontext von technologischen Lösungen, von Infrastrukturansätzen und von Politikansätzen bedacht werden.
Ausgangspunkt einer Bewertung des Standes der Energiewende ist die Verständigung darüber, was sie konkret umfasst. Hier bietet sich die Zielmatrix des Energiekonzepts der Bundesregierung vom Herbst 2010 an, die allerdings um folgende Punkte zu erweitern ist: vollständiger Ausstieg aus der Atomenergie bis zum Jahr 2022; Steigerung des Anteils der Kraft-Wärme-Kopplung an der gesamten Stromerzeugung bis 2020 auf 25 Prozent.
Refrigerators and freezers (subsumed under the term "cold appliances") are among the most widely used electrical appliances in the residential sector all around the world. Currently, about 1.4 billion domestic cold appliances worldwide use about 650 TWh electricity, which is 1.2 times Germany’s total electricity consumption, and cause CO2 emissions of 450 million tons of CO2eq.
Although the specific electricity consumption per volume of cold appliances has decreased during recent years due to technical progress and policy instruments like labelling and eco-design requirements, total worldwide energy consumption of these appliances is on the increase. Scenario calculations were carried out for 10 world regions by the Wuppertal Institute. Results show that about half of the energy consumption could be saved with the most energy-efficient appliances available today, and even higher savings will be possible with next generation technologies by 2030. According to the analysis, these savings are usually very cost-effective.
All these aspects are part of the new website "bigEE.net - Your guide to energy efficiency in buildings" which aims to provide information about technical options but also about policies to support the development of energy-efficient appliances.
To initiate and foster market transformation of energy-efficient appliances it is highly advisable for policymakers to generate appliances-specific policy packages. Since each regional market has its specificity (e.g. energy prices, typical appliance affecting the cost effectiveness of efficient appliances), the barriers for the market transformation of single product groups are also specific and need to be addressed by appropriate policies and measures. Elements of measures to build appropriate specific policy packages for refrigerators will be presented in the paper, and the refrigerator package from California (USA) demonstrates the successful implementation of a sector-specific package.
Conventional new buildings in OECD countries with a history of building codes save about 50 % of energy compared to average buildings in the building stock. This improvement, however, is not enough to create a building standard with low lifetime costs nor to reach long-term climate protection targets. Much higher energy savings can already be achieved through proven high-efficiency building concepts bringing net economic benefits among other advantages.
A strategic approach to integrated building design is the key to achieving these high-energy savings at low or no extra cost in residential buildings. In our paper we describe the "Easy Efficiency Approach", which can reduce primary energy consumption by 40 to 60 % compared to conventional new building standards, or by 70% to 80% when compared to the primary energy consumption of the existing building stock, and should be regarded as the minimum. This strategy focuses on low-cost options, mainly passive options. Although it can already significantly reduce energy consumption, this first step will not be sufficient to reach long-term climate protection goals. It is thus necessary to implement and support what we call an "Advanced Efficiency Approach", with savings up to 90% , as compared to new building standards, as soon as possible to avoid lock-in effects. Further improvements, especially through the active use of renewable energies, reduce the net primary energy demand to 0 % and beyond.
According to the chosen strategy clearly defined energy performance ranges, with reference to possible savings, for different climate zones worldwide are given. In verifying this approach simulations with BAT (Best Available Technologies) buildings of different types (single family, multi family, high rise) were carried out in close cooperation with project partners. This data has also been verified through an empirical database of built examples both for energy consumption as well their economic soundness.
Strategic policy packages to deliver energy efficiency in buildings : their international evidence
(2013)
The project "bigEE - Bridging the Information Gap on Energy Efficiency in Buildings" presents comprehensive information for energy efficiency in buildings and the related policy on the international internet-based knowledge platform bigee.net.
To develop the evidence-based information required for bigee.net, we addressed in a different and more systematic way than usual the question of how policy can support improved building energy efficiency most effectively: We combined (1) a theoretical, actor-centred analysis of market-inherent barriers and incentives for all actors in the supply and use chain of (energy-efficient) buildings to derive a recommended package combining the types of policies and measures the actors need to overcome all these barriers, with (2) empirical evidence on model examples of good practice policy packages to check if advanced countries have indeed used the combination of policies we derived from the actor-centred analysis.
In this way, we found that the recommendable policy package for new buildings is similar to the well-known one for appliances, but with the objective to mainstream nearly zero energy buildings. By contrast, the task for existing buildings is two-dimensional - increasing the depth of renovation first, to savings of 50 to 80%, and then the rate of energy-efficient renovation to 2% or more p.a. - and so the policy package needs more emphasis on individual advice, incentives, and financing. The paper presents the recommended packages as well as a comparison of existing national policy packages from California (USA), China, Denmark, Germany, and Tunisia and what we learned from it for effective packages and implementation.
ESCOs for residential buildings : market situation in the European Union and policy recommendations
(2013)
Many European city governments have voluntarily committed to ambitious CO2-emission reduction targets until 2020 and 2050. Supported by dedicated structures and networks (e.g. Covenant of Mayors), local governments have already developed, or are currently developing, ambitious climate action plans, all pursuing the aim of radical CO2-emission reduction in the long term.
Though, the development of climate action plans is only a first step, as the actual crucial and more challenging part its implementation. Besides financial investments also additional capacities, improved institutional structures and innovative strategies are necessary to successfully implement ambitious policies within existing national and regional framework conditions. There is often more competition than co-operation between cities. However, exchanging on common challenges in order to find new solutions provides potential for innovative ideas and new views on own structures. In particular, methods and formats for self-assessment and mutual learning can support cities' stakeholders to overcome their implementation gap in local energy and climate policies.
This paper will present results from the first phase of the three year project "CASCADE", which was initiated by 19 European cities in co-operation with EUROCITIES. Within the project, implementation challenges are being addressed in an intensive process of self-assessment and mutual learning. The methodological "backbone" of this process is a qualitative benchmarking framework in the thematic fields of "Renewable energy sources and distributed energy generation", "Energy efficient buildings and districts" and “Energy in urban transport”. Up to a certain degree, existing local climate policy benchmarks provide a common exchange platform, but mainly for the comparison between cities. The CASCADE benchmarking framework goes beyond competitive comparisons. As a qualitative criteria-based assessment procedure it identifies key challenges and factors for a successful implementation of established local climate policy plans. These factors have been developed from a qualitative survey including interviews and workshops with representatives of the participating cities.
Six cities serve as examples. Self-assessment reports were provided based on the CASCADE benchmarking framework focussing on the implementation status of their local climate policies. These reports were reevaluated by four or five project partners from different cities in a desk-review process. During subsequent four-days peer learning visits, the CASCADE benchmarking framework was used again as a tool for an in-depth assessment of the local climate and energy action plans and the local activities towards implementation of these strategic documents. Finally, the visitors drafted a feedback report with recommendations and improvements for the hosts.
The paper describes the methodology of the CASCADE benchmarking framework for integrated learning, its applicability for peer learning processes, as well as first experiences and results from the peer learning visits.
What makes a good policy? : Guidance for assessing and implementing energy efficiency policies
(2013)
Which factors are crucial to successfully design and implement a "good practice" policy to increase the energy efficiency of buildings and appliances? This is one of the main challenges for the new web platform bigee.net that provides guidance on good practice policies.
In this paper we examine the question what "good practice" is by presenting a multi-criteria assessment scheme to analyse different policies worldwide.
The assessment scheme contains a set of criteria addressing key factors leading to the success of a policy as well as its outcomes: a good policy addresses all market players and barriers, avoids lost opportunities and lock-in effects, has ambitious and regularly updated energy efficiency levels, and spill-over effects. Other criteria are high energy savings and the calculated cost-effectiveness.
The assessment scheme provides a standardised data collection approach, which paves the way for both qualitative and quantitative evaluation. Furthermore, it can help policy-makers to transfer a successful policy.
The development of the scheme is based on a literature review of worldwide implemented policies and measures that promote energy-efficiency of buildings and appliances. Criteria were operationalized, including a ranking between 0 and 10. The ranking is a decisive factor whether the policy qualifies as good practice. To demonstrate the practicability of this scheme, the paper analyses a good practice example according to the assessment scheme: Energy-Efficient Refurbishment and Energy Efficient Construction programmes of the German public bank KfW.
Several low-carbon energy roadmaps and scenarios have recently been published by the European Commission and the International Energy Agency (IEA) as well as by various stakeholders such as Eurelectric, ECF and Greenpeace. Discussions of these studies mainly focus on technology options available on the electricity supply side and mostly omit the significant challenges that all of the scenarios impose on the energy demand side.
A comparison of 5 decarbonisation scenarios from 4 of the most relevant recent scenario studies for the EU shows that all of them imply significant efficiency improvements in traditional appliances, usually well above levels historically observed over longer periods of time. At the same time they assume substantial electrification of transportation and heating. The scenarios suggest that both of these challenges need to be tackled successfully for decarbonising the energy system.
With shares of renewable electricity reaching at least 60 % of supply in 2050 in almost all of the decarbonisation scenarios, the adaptation of demand to variable supply becomes increasingly important. This aspect of demand side management should therefore be part of any policy mix aiming for a low-carbon power system.
Based on a quantitative analysis of 5 decarbonisation scenarios and a comparison with historical evidence we derive the (implicit) new challenges posed by the current low-carbon roadmaps and develop recommendations for energy policy on the electricity demand side.
The role of cities in mitigating GHG emissions and thus tackling global warming has gained importance over the last years.Many cities have developed climate action plans, primarily to achieve long-term "low-carbon" mitigation goals set by national governments or (inter)national agreements. A mere adoption of high level targets, however, raises the question whether these targets are applicable for cities with very different framework conditions.
We argue that it is crucial to understand the socio-economic, geophysical, spatial, infrastructural and political framework of a city - a broad approach, which is generally missing in climate action plans. Thus, determining drivers and barriers for future development paths is neglected by local policies, which leads to a gap between ambition (target) and reality (implementation).
We exemplarily examine this hypothesis for the shrinking city of Oberhausen (Germany). Oberhausen, located in the Ruhr area,is a typical old industrial region, which has seen a decline of its industrial basis over the last decades. We analysed historical data and developed scenarios until 2030. Both show a significant decrease in CO2 emissions. A closer look, however, reveals that the reduction is primarily due to the economic transformation (less manufacturing, more service industry, accompanied by a decrease in population) and general energy efficiency developments following the implementation of national and EU policies. Although the city has implemented–and will further implement - many instruments and policies to reduce CO2 emissions, local barriers such as unemployment, low rents, low income, high per capita debts, etc. dramatically reduce the city's capacity for action.
The results show that Oberhausen's emission reductions do not reflect active energy policies but are mainly driven by an economic decline. To reach ambitious reduction targets, however, the city needs to be enabled to take action in achieving appropriate and reasonable targets.
Shifting baselines : the interdependency of local and national policies to reduce GHG emissions
(2013)
Climate change and thus low-carbon transitions are global challenges, which require commitment and effort on all political levels. As international climate politics has approached its limits over the last two decades, the role of cities has simultaneously gained in importance. Many cities1 worldwide have committed to ambitious climate protection targets, which often exceed national targets. However, cities cannot act in isolation. Their opportunities for action are embedded in an (inter)national policy framework, which may either support or hinder local actions. This gives rise to the question: which opportunities for climate protection do cities really have in a political system of multi-level governance?
This question can be illustrated using the city of Hamburg as an example for the German climate policy regime. The city aims to reduce its annual CO2 emissions by 2 million metric tons and attempts to quantify the impact of local and national policies and actions using a bottom-up monitoring approach. We therefore analyse more than 400 local actions with respect to the induced CO2 emission reductions. We also take a closer look at national and European policies and their impacts on local energy use and emissions. In total, 15 policies and instruments - broadly ranging from instruments to foster energy efficiencyin residential and non-residential buildings, in appliances and in the transport sector, to support renewable energy sources (including biofuels) and to uptake CHP - are considered.
Our approach consists in measuring separately the impact of local and national policies and actions on urban CO2 emissions. While the city of Hamburg has implemented many policies and actions, our results show that, a significant proportion of its CO2 reduction is due to national policies, in the context of the German "Energiewende", which cannot or can only indirectly be influenced by the city. The results imply that local commitment and effort is essential in addressing the global challenge, yet ambitious targets can only be met in the presence of a supportive national policy framework. The analysis shows that many policies and measures implemented at national level require supportive structures and activities at local level in order to bridge information and implementation gaps of these measures.
Nachhaltiges Ressourcen-Management : eine Herausforderung für die Politik und die Wissenschaft
(2013)
The need of recycling obsolete mobile phones has significantly
increased with the worldwide propagation of mobile phones and
their inherent rapid turnover. In this article, we examine the
acceptance of mobile phone return programs by using the
Technology Acceptance Model and multiple case studies. Our
findings can provide valuable recommendations for the setup of
future mobile phone return programs.
Wind energy that can neither be fed into the grid nor be used regionally must be curtailed. This paper proposes different options to deal with such surplus wind energy amounts in a time horizon until 2020. It assesses their ability to handle the surplus energy in a sustainable way using a multi criteria analysis. The paper bases on a study that was prepared for the Ministry for Climate Protection, Environment, Agriculture, Nature Conservation and Consumer Protection of North Rhine-Westphalia between 2010 and 2012.
The field of nutrition is facing numerous social, ecological and economic challenges in the coming decades. The food industry belongs to the most significant economic sectors worldwide and the increasing population of 9 billion in 2050 will cause a growing demand on food. So far, changing lifestyles, especially the global rising consumption of meat and dairy products are increasing environmental damage. Moreover our health and wellbeing are the direct result of healthy or unhealthy nourishment and influence follow-up indicators like individual and public health, the expense of the health sector and work productivity.
The material footprint is a tool to measure and optimize the resource consumption of both products and their ingredients and the production processes along the whole value chain. It covers the whole life cycle of the products, from the extraction of raw materials to the processing industry, distribution, consumption, recycling, and disposal. In order to decrease resource consumption to a level in line with the planetary boundaries, the material footprint of household consumption should achieve a level of six to eight tonnes per capita in a year by 2050. This means a reduction in natural resource consumption by a factor of 5 to 10 in Western European countries. In order to ensure a decent lifestyle for all people in 2050, also the material footprint of nutrition has to be reduced significantly by 2050.
The paper shows the relevance and role of nutrition in the overall material footprint of households on the basis of existing studies on the overall resource consumption caused by household consumption. Quantified meal and diet examples are given. It also discusses the causes of food waste and raises the question how a reduction of food waste is possible and can help decreasing the resource consumption in the food sector.
The cement industry is one of the major energy consuming and CO2 emitting sectors in China. In 2010, 1,868 million tons of cement has been produced, which accounted for 56.1% of the world's total cement production. The 11th Five-Year Plan (FYP) (2006-2010) included policy measures for CO2 emission abatement in cement production. Based on the main governmental framework of CO2 mitigation policies at national level in the cement sector, key policies and technologies used during this period are identified and their effects on CO2 reduction are assessed. This paper calculates the reduction of CO2 emissions related to four main policies and technologies for efficient cement production in the 11th and the 12th FYP (2011-2015) with 2005 as a reference year. These are waste heat recovery, closing outdated facilities, substitution for clinker production and other technologies aiming to increase energy efficiency. Due to these measures, we estimate that a total CO2 emission reduction during the 11th FYP of 397 million tonnes could be saved, which is considerably different to 185.75 million tonnes estimated by Zeng (2008) and 303 million tonnes by the NDRC by using different calculation methods. Of the four technologies, the 4th group of energy efficiency increasing techniques was the most important policy and avoided the largest amount of CO2 emissions. Previous energy intensity reduction was mainly due to the outdated production closing and energy efficiency improving. Based on the assessment of technology performance, it appears that there is still a large emission reduction potential in cement production processes. The paper calculates this potential for the 12th FYP period (2011-2015) based on these four identified policy measures. The result is compared to the Chinese government targets in the 12th FYP and promising future CO2 mitigation policies and technologies are proposed, such as the use of alternative energy.
Increasing urbanisation and climate change belong to the greatest challenges of the 21st century. A high share of global greenhouse gas emissions are estimated to originate in urban areas (40 % to 78 % according to UN Habitat 2010). Therefore, low carbon city strategies and concepts implicate large greenhouse gas (GHG) mitigation potentials. At the same time, with high population and infrastructure densities as well as concentrated economic activities, cities are particularly vulnerable to the impacts of climate change and need to adapt. Scarce natural resources further constrain the leeway for long-term, sustainable urban development. The Low Carbon Future Cities (LCFC) project aims at tapping this three-dimensional challenge and will develop an integrated strategy / roadmap, balancing low carbon development, gains in resource efficiency and adaptation to climate change. The study focuses on two pilot regions - one in China (Wuxi) and one in Germany (Düsseldorf+) - and is conducted by a German-Chinese research team supported by the German Stiftung Mercator. The paper gives an overview of first outcomes of the analysis of the status quo and assessment of the most likely developments regarding GHG emissions, climate impacts and resource use in Wuxi. The project developed an emission inventory for Wuxi to identify key sectors for further analysis and low carbon scenarios. The future development of energy demand and related CO2 emissions in 2030 were simulated in the current policy scenario (CPS), using five different sub-models. Selected aspects of Wuxi's current material and water flows were analysed and modelled for energy transformation and the building sector. Current and future climate impacts and vulnerability were investigated. Recent climatic changes and resulting damages were analysed, expected changes in temperature and precipitation in the coming four decades were projected using ensembles of three General Circulation Models. Although Wuxi's government started a path to implement a low carbon plan, the first results show that more ambitious efforts are needed to overcome the challenges faced.
Domestic sustainability innovations are considered to play a key role for pathways to sustainable consumption. The paper shows how open innovation processes can lead to such sustainable innovations, by means of an experimental and interactive infrastructure. It presents how – based on results of the LivingLab project conducted at the Wuppertal Institute within a European Consortium (Lead TU Delft) - currently an extended Sustainable LivingLab approach is developed and applied in two joint research projects at national and international level. To conceptualise this approach, we refer to recent proceedings in innovation and sustainability research, i.e. practice theory to analyse sustainable product design. Focusing on technical solutions and individual behaviour while assuming people's needs as fixed entities, disregards the dynamics of everyday practices in which technologies themselves create needs. Therefore, the consumer's position should be strengthened through userdriven innovation. LivingLabs are combined lab-/household systems, which put the user, i.e. the home occupant, and value chain related actors (producer, handicraft, etc.) on centre stage in the innovation process. We introduce its research agenda and the Three Phases Model of research. We hypothesise that at the end of this userintegrated innovation process developed products have a higher chance of successful diffusion. To illustrate this, we show how the LivingLab infrastructure is employed for the German InnovationCity Ruhr and how it can promote the development of user-centred sustainable consumption strategies.
Cities as "real world laboratories" for system innovations : theories, models and empirical designs
(2012)