Refine
Has Fulltext
- no (208) (remove)
Year of Publication
- 2011 (208) (remove)
Document Type
- Contribution to Periodical (57)
- Part of a Book (49)
- Report (48)
- Working Paper (21)
- Conference Object (16)
- Peer-Reviewed Article (8)
- Book (7)
- Doctoral Thesis (2)
CDM-Reform
(2011)
Biogas and bio-methane that are based on energy crops are renewable energy carriers and therefore potentially contribute to climate protection. However, significant greenhouse gas emissions resulting from agricultural production processes must be considered, mainly resulting from agricultural production processes, as fertilizer use, pesticide etc.
This paper provides an integrated life cycle assessment (LCA) of biogas (i.e. bio-methane that has been upgraded and injected into the natural gas grid), taking into account the processes of fermentation, upgrading and injection to the grid for two different types of biogas plants thus examining the current state of the art as well as new, large-scale plants, operated by industrial players. Not only technical and engineering aspects are taken into account here, but also the choice of feedstock which plays an important role as to the overall ecological evaluation of bio-methane.
The substrates evaluated in this paper - aside from maize - are rye, sorghum, whole-crop-silage from triticale and barley, and the innovative options of agricultural grass (Landsberger Gemenge, a mixture of hairy vetch (vicia villosa), crimson clover (trifolium incarnátum) and Italian ryegrass (lolium multiflorum)) as well as a combination of maize and sunflower.
During the last century, the consumption of materials for human needs increased by several orders of magnitude, even for non-renewable materials such as metals. Some data on annual consumption (input) and recycling/waste (output) can often be found in the federal statistics, but a clear picture of the main flows is missing. A dynamic material flow model is developed for the example of copper in Switzerland in order to simulate the relevant copper flows and stocks over the last 150 years. The model is calibrated using data from statistical and published sources as well as from interviews and measurements. A simulation of the current state (2000) is compared with data from other studies. The results show that Swiss consumption and losses are both high, at a level of about 8 and 2 kg/(cap year), respectively, or about three times higher than the world average. The model gives an understanding of the flows and stocks and their interdependencies as a function of time. This is crucial for materials whose consumption dynamics are characterised by long lifetimes and hence for relating the current output to the input of the whole past. The model allows a comprehensive discussion of possible measures to reduce resource use and losses to the environment. While increasing the recycling reduces losses to landfill, only copper substitution can reduce the different losses to the environment, although with a time delay of the order of a lifetime.
This contribution presents the state of the art of economy-wide material flow accounting. Starting from a brief recollection of the intellectual and policy history of this approach, we outline system definition, key methodological assumptions, and derived indicators. The next section makes an effort to establish data reliability and uncertainty for a number of existing multinational (European and global) material flow accounting (MFA) data compilations and discusses sources of inconsistencies and variations for some indicators and trends. The results show that the methodology has reached a certain maturity: Coefficients of variation between databases lie in the range of 10% to 20%, and correlations between databases across countries amount to an average R2 of 0.95. After discussing some of the research frontiers for further methodological development, we conclude that the material flow accounting framework and the data generated have reached a maturity that warrants material flow indicators to complement traditional economic and demographic information in providing a sound basis for discussing national and international policies for sustainable resource use.
Resultado de la intervención intensiva antropogénica, la subcuenca ahora enfrenta serios problemas como la degradación de los suelos, deforestación y contaminación del agua. Estos impactos ambientales han provocado escasez del agua y disminución de su calidad a lo largo del transcurso del río y sus afluentes afectando la producción agropecuaria tanto como los ecosistemas dependientes del agua. Reconociendo estos problemas la administración municipal llegó a priorizar el territorio de la subcuenca. En este se promovió un proceso de concertación con actores locales de la subcuenca del Gil González con el fin de definir zonas de conservación, regeneración natural y fomento de sistemas de producción agrícola sostenible. Como mecanismo para promover estas medidas se estableció el Proyecto de Pagos por Servicios Ambientales Hídricos (PPSA-H) en la subcuenca del Río Gil González en el año 2007, lo cual forma parte del Programa Manejo Sostenible de los Recursos Naturales y Fomento de las Competencias Empresariales de la Cooperación Técnica Alemana (GIZ GmbH) en Nicaragua. El concepto de Pago por Servicios Ambientales Hídircos (PSA-H) esta aplicado como un mecanismo de incentivos financieros. Los planteamientos generales de la investigación están relacionados al concepto de PSA-H como una herramienta para la gestión integral de cuencas hidrográficas. Aparte de los planteamientos generales esta investigación trata de verificar específicamente la eficacia de la implementación del Proyecto de Pagos por Servicios Ambientales Hídricos (PSA-H) en la Subcuenca del Gil González como un caso de estudio.
From hydrological ecosystem service valuation to participatory integrated water resource management
(2011)
International comparison of energy labeling and standards for energy efficient and green buildings
(2011)
Resource efficiency in Europe : policies and approaches in 31 EEA member and cooperating countries
(2011)
Lastmanagement - neue Anforderungen und Einsatzfelder durch den Ausbau regenerativer Energien
(2011)
Wissensmanagement in der Wissenschaft umfasst alle Wissensprozesse von der Wissensproduktion durch Forschung über den Wissenstransfer bis hin zur Wissensspeicherung in Bibliotheken. Wissenschaft gilt heute als unverzichtbar zur Bewältigung von Herausforderungen - doch ist das deutsche Wissenschaftssystem dafür optimal gerüstet? Mit dem Analyseraster der Wissensmanagement-Debatte werden die Wissensprozesse in der Wissenschaft beschrieben und auf ihre Stärken und Schwächen hin durchleuchtet. Daraus ergeben sich Visionen für die wissenschaftliche Politikberatung und das wissenschaftliche Publizieren, aber auch neue theoretische Einsichten etwa zur Abgrenzung wissenschaftlichen Wissens gegen andere Arten der Wissenserzeugung, zum Verhältnis zwischen Grundlagenforschung und angewandter Forschung sowie zwischen Wissenschaft und Technik.
Energiewende
(2011)
Klärungen zum Stand der Antizipierbarkeit von Finanzcrashs : die Finanzsystemkrise von 2007/08
(2011)
Ackerfrüchte in den Tank?
(2011)
Iran as an energy-rich country faces many challenges in optimal utilization of its vast resources. High population and economic growth, generous subsidies program, and poor resource management have contributed to rapidly growing energy consumption and high energy intensity for the past decades. The continuing trend of energy consumption will bring about new challenges as it will shrink oil exports revenues restraining economic activities and lowering standard of living. This study intends to tackle some of the important challenges in the energy sector and to explore alternative scenarios for utilization of energy resources in Iran for the period 2005-2030. We use techo-economic or end-use approach along with econometric methods to model energy demand in Iran for different types (fuel, natural gas, electricity, and renewable energy) in all sectors of the economy (household, industry, transport, power plants, and others) and forecast it under three scenarios: Business As Usual (BAU), Efficiency, and Renewable Energy.
This study is the first comprehensive study that models the Iranian energy demand using the data at different aggregation levels and a combination of methods to illuminate the future of energy demand under alternative scenarios. The results of the study have great policy implications as they indicate a huge potential for energy conservation and therefore additional revenues and emission reduction under the efficiency scenario compared with the base scenario. Specifically, the total final energy demand under the BAU scenario will grow on average by 2.6 percent per year reaching twice the level as that in 2005. In contrast, the total final energy demand in the Efficiency scenario will only grow by 0.4 percent on average per year. The average growth of energy demand under the combined Efficiency and Renewable Energy scenarios will be 0.2 percent per year. In the BAU scenario, energy intensity will be reduced by about 30 percent by 2030, but will still be above today's world average. In the Efficiency scenario, however, energy intensity will decline by about 60 percent by 2030 to a level lower than the world average today. The energy savings under the Efficiency and Renewable scenarios will generate significant additional revenues and will lead to 45 percent reduction in CO2-emissions by 2030 as compared to the BAU trends.