Refine
Year of Publication
Document Type
- Report (84)
- Contribution to Periodical (43)
- Peer-Reviewed Article (31)
- Working Paper (21)
- Part of a Book (16)
- Conference Object (4)
- Doctoral Thesis (3)
- Book (1)
- Master Thesis (1)
Division
- Kreislaufwirtschaft (204) (remove)
Supply risks and environmental concerns drive the interest in critical raw material recycling in the European Union. Globally, waste electrical and electronic equipment (WEEE) is projected to increase by almost 40% until 2030. This waste stream can be a source of secondary raw materials. The determination of the economic feasibility of recycling and recovering specific materials is a data-intensive, time-consuming, and case-specific task. This study introduced a two-part evaluation scheme consisting of upper continental crust concentrations and raw material prices as a simple tool to indicate the potential and limitations of critical raw material recycling. It was applied to the case of light-emitting diodes (LED) lamps in the EU. A material flow analysis was conducted, and the projected waste amounts were analyzed using the new scheme. Indium, gallium, and the rare earth elements appeared in low concentrations and low absolute masses and showed only a small revenue potential. Precious metals represented the largest revenue share. Future research should confirm the validity and usefulness of the evaluation scheme.
Artificial intelligence in the sorting of municipal waste as an enabler of the circular economy
(2021)
The recently finalized research project "ZRR for municipal waste" aimed at testing and evaluating the automation of municipal waste sorting plants by supplementing or replacing manual sorting, with sorting by a robot with artificial intelligence (ZRR). The objectives were to increase the current recycling rates and the purity of the recovered materials; to collect additional materials from the current rejected flows; and to improve the working conditions of the workers, who could then concentrate on, among other things, the maintenance of the robots. Based on the empirical results of the project, this paper presents the main results of the training and operation of the robotic sorting system based on artificial intelligence, which, to our knowledge, is the first attempt at an application for the separation of bulky municipal solid waste (MSW) and an installation in a full-scale waste treatment plant. The key questions for the research project included (a) the design of test protocols to assess the quality of the sorting process and (b) the evaluation of the performance quality in the first six months of the training of the underlying artificial intelligence and its database.
Der Begriff "Pfand" umfasst in seinen konkreten Anwendungen ganz unterschiedliche Konzepte, die sich mit unterschiedlichen Zielsetzungen auf verschiedene Produktgruppen beziehen und dabei sehr unterschiedliche Effekte auslösen. Zentrales Ziel dieser Kurzstudie ist es, zu einer etwas differenzierteren Betrachtung von Pfandsystemen beizutragen und auf die Stärken und Schwächen in den verschiedenen Anwendungskontexten hinzuweisen. Mit diesem Ziel werden in Kapitel 2 verschiedene Best-Practice-Beispiele dargestellt, bei denen die Einführung von Pfandsystemen in verschiedenen Formen zur Umsetzung einer Kreislaufwirtschaft beigetragen haben. Kapitel 3 beschreibt die verschiedenen Kriterien, auf deren Basis sich unterschiedliche Pfandsysteme für konkrete Produktgruppen begründen lassen könnten; ein spezifischer Fokus wird hierbei auf Verpackungssysteme gelegt. Im abschließenden Kapitel 4 werden davon ausgehend Handlungsempfehlungen entwickelt, wie das Instrument Pfand in Deutschland in möglichst effizienter Form genutzt werden könnte.
Electronics containing growing quantities of high value and critical metals are increasingly used in automobiles. The conventional treatment practice for end-of-life vehicles (ELV) is shredding after de-pollution and partial separation of spare parts. Despite opportunities for resource recovery, the selective separation of components containing relevant amounts of critical metals for the purpose of material recycling is not commonly implemented. This article is aimed to contribute to recycling strategies for future critical metal quantities and the role of extended material recovery from ELVs. The study examines the economic feasibility of dismantling electronic components from ELVs for high value metal recycling. The results illustrate the effects of factors as dismantling time, labour costs and logistics on the economic potential of resource recovery from ELVs. Manual dismantling is profitable for only a few components at the higher labour costs in western/northern parts of Europe and applicable material prices, including the inverter for hybrid vehicles, oxygen sensor, side assistant sensor, distance and near distance sensors. Depending on the vehicle model, labour costs and current material prices, manual dismantling can also be cost-efficient for also some other such as the heating blower, generator, starter, engine and transmission control, start/stop motor, drive control, infotainment and chassis control.
Elektro- und Elektronikaltgeräte zählen zu den am schnellsten wachsenden Abfallströmen in Europa. Reparatur und Wiederverwendung können durch eine Verlängerung der Produktnutzungsdauer dazu beitragen, dass weniger Abfall entsorgt werden muss und Ressourcen durch die Vermeidung von Neuproduktion eingespart werden. In der Europäischen Abfallrahmenrichtlinie (2008/98/EG) wird der "Vorbereitung zur Wiederverwendung" ein hoher Stellenwert eingeräumt; die Abfallvermeidung hat, gefolgt von der "Vorbereitung zur Wiederverwendung", eindeutig Priorität gegenüber dem Recycling. Die Abfallhierarchie verspricht zwar implizit ökologische Vorteile der "Vorbereitung zur Wiederverwendung", allerdings wurden die institutionell-ökologischen Zusammenhänge des Konzepts in der Forschungsdebatte bislang vernachlässigt. Somit sind die tatsächlichen Ressourceneinsparpotenziale der "Vorbereitung zur Wiederverwendung" noch weitgehend unerforscht. Vor diesem Hintergrund zielt das Dissertationsprojekt darauf ab, ein Verständnis dafür zu entwickeln, wie spezifische Kontexte (beispielsweise die rechtlichen Rahmenbedingungen, ökonomische oder informatorische Aspekte) die "Vorbereitung zur Wiederverwendung" von Produkten aus der Ressourcenperspektive beeinflussen. Dafür wurden die institutionell-ökologischen Zusammenhänge der "Vorbereitung zur Wiederverwendung" integrativ betrachtet, und zwar mit Fokus auf ausgewählte Geräte - Flachbildmonitore (FlaMo's), Kaffeefiltermaschinen (KaFil's), Kaffeepadmaschinen (Ka-Pad's), Lautsprecherboxen (LauS) und Waschmaschinen (WaMa's) - und im Sinne einer vergleichenden Analyse von zwei abfallstrukturell-charakteristischen Regionen - Flandern und Nordrhein-Westfalen. Die interdisziplinäre Fragestellung der Arbeit erforderte die Anwendung qualitativer Methoden für die tiefgründige Untersuchung der "Vorbereitung zur Wiederverwendung" in den verschiedenen institutionellen Systemen, aber auch quantitative Methoden im Hinblick auf die zahlenmäßige Bewertung der Ressourceneinsparpotenziale. Zentrale Datenerhebungsinstrumente waren fallbeispielbezogene öffentliche Dokumente und Webseiten, die Analyse betriebsinterner Dokumentationen, Literaturauswertungen, Stichprobenerhebungen, Beobachtungen und Experteninterviews.
ReUse und Secondhand in Deutschland : Einstellungen zum Thema Abfallvermeidung und Nachhaltigkeit
(2020)
Umweltschutz und Nachhaltigkeit bestimmen seit Jahren die öffentlichen Debatten sowie zunehmend das Handeln privater Haushalte. Eine Mehrheit geht davon aus, dass die Bedeutung nachhaltigen Handelns weiter wachsen wird. Allerdings fällt es vielen anscheinend schwer, nicht nur nachhaltig zu denken, sondern auch zu handeln. Eine Studie des Wuppertal Instituts in Zusammenarbeit mit eBay Kleinanzeigen zeigt diese Diskrepanz. Deutlich werden auch Unterschiede im Konsumverhalten jüngerer und älterer Menschen. Dennoch: Immer mehr Menschen tragen aktiv zum Klimaschutz bei und kaufen oder verkaufen beispielsweise gebrauchte Artikel. Nahezu jeder hat hierzulande bereits einmal etwas Gebrauchtes verkauft. Jeder Zweite hat bereits einmal Gebrauchtes gekauft. Ungeachtet dessen liegen in deutschen Haushalten durchschnittlich rund 1.300 Euro in Form ungenutzter Dinge und verborgener Schätze.
The need for a transition towards a circular economy (CE) is evident, as the current economic model is based on the exploitation of far more resources than the planet can replenish sustainably. A significant part of this economic transition is the inception of new, CE-oriented startups and business activities. While business model frameworks (BMF), such as the Business Model Canvas (BMC), were at the center of discussions about structuring business ideas in the beginning of the millennium, the conversation must now shift towards circular BMFs (CBMF). This paper follows the Design Research Methodology (DRM) for an empirical approach to devising a novel CBMF, including expert interviews as well as a first application of the framework with a startup. Throughout this process, a new and innovative tool called Circular Business Framework (CBF) was created and tested based on CE principles.
Die Wirtschaftsleistung von Deutschland ist durch die Corona-Pandemie stark beeinträchtigt. Um die Wirtschaft zu beleben, einigten sich die Regierungsparteien am 3. Juni 2020 in ihrem Koalitionsausschuss auf ein "Konjunktur- und Krisenbewältigungspaket" sowie ein "Zukunftspaket" in Höhe von insgesamt 130 Milliarden Euro. Für 2020 und 2021 sind fast 60 Maßnahmen vorgesehen, die von steuerlichen Vergünstigungen bei der Mehrwertsteuer bis hin zu konkreten Investitionen in Zukunftstechnologien reichen. Mit Blick auf den Klimaschutz beinhaltet das Maßnahmenpaket der Großen Koalition zwar gute Ansätze und viele wichtige Impulse, die allerdings zu verpuffen drohen, wenn sie nicht durch eine konsequente und nachhaltig ausgerichtete Klimapolitik flankiert werden. Zudem fehlen für den Klimaschutz wichtige Bereiche, wie Investitionen in die Kreislaufwirtschaft. Außerdem werden Maßnahmen zur Steigerung der Energieeffizienz nur unzureichend berücksichtigt. Gerade in diesen Bereichen hätten sich konjunkturbelebende Effekte und Klimaschutz in idealer Form ergänzen können, kritisiert das Wuppertal Institut. Dieses Diskussionspapier reagiert auf die vorliegenden Vorschläge und fasst zusammen, welche Maßnahmen im Rahmen der jetzt anstehenden Umsetzungsphase nachgebessert werden sollten und wo Ergänzungen notwendig sind.
Digitale Treffen, Videokonferenzen, Streaming - die Coronakrise hat unseren beruflichen und privaten Alltag mit einem Schlag in virtuelle Räume katapultiert und die Digitalisierung vorangetrieben. Daraus lassen sich auch Lehren für den Einsatz von digitalen Technologien für die nachhaltige Entwicklung ziehen.
Auf dem Weg zu einer ressourceneffizienten Gesellschaft bedarf es richtiger Rahmenbedingungen, Informationen und Handlungsalternativen. Eine Möglichkeit, diese Voraussetzungen zu schaffen, ist ein kommunales Zero-Waste-Konzept. Zero Waste lässt sich übersetzen mit "Null Abfall, null Verschwendung" und verfolgt das Ziel, möglichst wenig Abfall zu produzieren sowie effizient und sparsam mit Ressourcen umzugehen. Ein solches Konzept wie in Kiel ist die Basis für eine Zertifizierung als Zero Waste City, eine Auszeichnung, die der europäische Verein Zero Waste Europe vergibt. 2007 wurde die italienische Gemeinde Capannori zur ersten Zero Waste City in Europa erklärt, seitdem sind knapp 400 europäische Gemeinden dieser Bewegung gefolgt.
The ultimate goal of German Resource Efficiency Programme (ProgRess) is to make the extraction and use of natural resources more sustainable and reduce associated environmental pollution as much as possible. By doing this - also with responsibility towards future generations - the programme should create a prerequisite for securing a long-term high quality of life. To bring the policy approaches formulated in ProgRess to reality, efforts to implement resource efficiency measures have to be increased at all levels - from international to regional to local.
The chapter intends to provide an impetus for the current debate on ProgRess policy development. The chapter identifies, analyses and describes deficits and possibilities of vertical integration of the German programme in particular and derives recommendations for action which may also serve as indications for other strategies. The following sections are based on results of the advisory report "Vertical integration of the national resource efficiency programme ProgRess (VertRess)", conducted by the German Institute of Urban Affairs (Difu) and the Wuppertal Institute for Climate, Environment and Energy on behalf of the German Environmental Agency (UBA) and the Federal Ministry of the Environment, Nature Conservation and Nuclear Safety (BMU).
2013 wurde das Abfallvermeidungsprogramm des Bundes verabschiedet. Mit dem Programm sollten Abfallmengen reduziert werden. Das Programm wurde einer kritischen Bewertung unterzogen und wird nun im Jahr 2020 fortgeschrieben. Dafür wurden in einer UBA-Studie prioritäre Abfallströme und Konzepte erarbeitet und Maßnahmenvorschläge entwickelt, um die Abfallvermeidung zukünftig konkreter auszugestalten.
The waste prevention program (WPP) from 2013 must be evaluated every 6 years and updated if necessary. The review and evaluation of the implementation of the WPP took place within the scope of the project. Based on the analysis results for the implementation of the WPP at federal, state and municipal level and an assessment of existing prevention potentials, concrete proposals for a possible further development and updating of the program on prioritized waste streams and corresponding priority prevention approaches were developed. In addition, structural adjustment and change needs of the WPP were worked out and further research was shown.
Mehr als sechs Millionen Tonnen Kunststoffabfälle fallen in Deutschland jährlich an, nur etwas weniger als die Hälfte kann werk- und rohstofflich genutzt werden, der Rest wird verbrannt. Gerade gemischte Kunststoffarten erschweren das Recycling. Hier bietet sich das chemische Recycling (Pyrolyse) an. Bei diesem Verfahren werden die Stoffe durch hohe Temperaturen zersetzt und in kleinere Moleküle aufgespalten. Diese lassen sich im Sinne der Kreislaufwirtschaft in neue Kunststoffe oder chemische Grundstoffe überführen. Die Schätzungen gehen von bis zu zwei Millionen Tonnen Kunststoffabfall jährlich aus, der auf diese Weise wiederverwendet werden könnte.
Das vorliegende Diskussionspapier zeigt, dass Pyrolyse von gemischten Kunststoffabfällen die chemische Industrie sowie die Abfallwirtschaft klimafreundlicher gestalten kann. Im Papier geht das Autorenteam auf die Potenziale und Entwicklungsperspektiven für Nordrhein-Westfalen ein mit dem Ziel, wissenschaftliche Grundlagen für Investitionsentscheidungen und Projektentwicklung im Sinne der Kreislaufwirtschaft zu schaffen.
Ausweg aus dem Einweg? : Auswirkungen der Coronakrise auf das Verpackungsaufkommen in Deutschland
(2020)
Das im Auftrag des Umweltschutzamts Kiel entwickelte Zero-Waste-Konzept zeigt anhand eines umfangreichen Handlungsplans, wie Kiel zur "Zero Waste City" werden kann. Das Konzept ist die Basis für eine Zertifizierung als "Zero Waste City" - eine Auszeichnung, die der europäische Verein Zero Waste Europe vergibt. Nachdem im Jahr 2007 die italienische Gemeinde Capannori zur ersten "Zero Waste City" in Europa erklärt wurde, haben sich knapp 400 europäische Gemeinden dieser Bewegung angeschlossen.
Für das Kieler Zero-Waste-Konzept stellten die Forschenden insgesamt 20 konkrete Ziele auf, die helfen, Abfall zu reduzieren, die Wiederverwendung von Produkten zu steigern und die Abfalltrennung zu verbessern. Kiels ambitioniertes Ziel: Die Stadt will die Maßnahmen, die innerhalb des Zero-Waste-Konzepts ermittelt wurden, zwischen 2025 und 2050 umsetzen und bis 2035 die Gesamtabfallmenge pro Kopf und Jahr durchschnittlich um 15 Prozent senken, die Haus- und Geschäftsabfälle - also Restabfälle - bis zum Jahr 2035 halbieren und langfristig auf 50 Kilogramm pro Kopf und Jahr reduzieren.
Effectiveness and efficiency of food-waste prevention policies, circular economy, and food industry
(2020)
The earth as we know it can only continue to exist if humanity finds a way to switch to a sustainable use of energy and resources. This work contributes to the research carried out to achieve this goal by improving the coating of adsorptive materials. These are used in heat transformation and drying processes that allow for efficient temperature and humidity control in buildings. A central component of these adsorptive coatings is the binder that acts as "glue" in the manufacturing of the coating. In this work the methods to evaluate binder performance regarding their thermal stability under the process conditions, their mechanical stability and their influence on the adsorptive properties of the coating were established. The coatings have to meet special requirements due to the thermal stresses and low pressure atmosphere they experience in these applications. A selection of silicone binders was then characterized with the established tests according to these requirements. Additionally a selection of inorganic binders was investigated because they allow for the use of high desorption temperatures and thus a high energy efficiency of the process. Out of these binders Silres® MP50E emerged as the most promising one due to very good adsorptive properties of the coating, its good temperature stability and ease of use. While some of the inorganic binders showed very good adsorptive properties and temperature stability the mechanical stability of all inorganic binders was not sufficient for their use in adsorption heat transformation technology. This is the first time that a broad selection of binders was evaluated with regards to adsorptive coatings and the results published in literature. With a suitable binder identified, the next step was to optimize the coating of the heat exchangers in order to work out how to manufacture the most efficient and powerful heat exchangers. Samples with different coating thicknesses were manufactured in small scale and full scale and their adsorption behavior was characterized. It could be shown for the first time that it is possible to increase energy efficiency by improving the mass ration of adsorber to coating and increase the delivered power at the same time. This was shown for small and full scale samples. It was shown that under the corresponding conditions the heat transfer from the coating layer to the adsorber metal substrate is the limiting step in the process. These results can now be used for the planning and construction of adsorbers. With knowledge of a suitable binder and how to coat efficient, powerful adsorbers, the coating process itself was improved to allow for industrial scale manufacturing. A central point here is the ability to control slurry rheology. Out of many rheology additives those that are suited for the application in adsorption heat transformation were identified and their influence on the slurry rheology thoroughly characterized. Additionally the process of slurry preparation could be simplified for several different adsorbents. Here it was shown that the supersonic deagglomeration step is not necessary to prepare a slurry. Extending the possible coating techniques and in addition to the dip coating process used so far, the spray coating of adsorptive coatings was established for the first time in literature. This process is widely used in the industry and allows for easier plugin into existing coating processes. For the coating of high resolution patterns a proof of concept of the screen printing process was carried out.
Das Vorhaben analysiert 1.) die Argumente verschiedener Positionen im Wachstumsdiskurs und formuliert eine idealtypische "vorsorgeorientierte Postwachstumsposition". Er präsentiert zudem Ursachen von Wirtschaftswachstum und identifiziert gesellschaftliche Bereiche, deren Funktion vom Wirtschaftswachstum abhängen könnte. Darüber hinaus werden Reformvorschläge diskutiert, um diese Wachstumsabhängigkeit zu verringern. Das Vorhaben untersucht 2.) die Relevanz der Postwachstumsdebatte für Ressourcenpolitik und eine entsprechende Instrumentierung. Außerdem werden 3.) konstitutive Kernelemente einer nachhaltigen (Postwachstums-)Gesellschaft bestimmt. Das Vorhaben setzt damit Impulse zur gesellschaftlichen Debatte über die Ausgestaltung und Instrumentierung von Transformationspfaden für "gesellschaftliches Wohlergehen innerhalb planetarer Grenzen".
The study sheds light on the background of the prevention of plastic waste from packaging and disposable products by explaining the need for action, the environmental impacts and risks to human health. Experiences of the members of the PREVENT Waste Alliance and their partners in the prevention of plastic waste by multi-actor partnerships are presented by means of 17 best practice examples. Finally, the study gives recommendations for the reduction of plastic waste and the further work of the PREVENT Waste Alliance. These include success factors for waste prevention, necessary next steps and conclusions regarding the necessary political framework conditions.
Businesses like Airbnb have shown that a successful circular economy (CE) business can operate exclusively online. Although online communication and web appearance attributes have been subject to academic research given accelerated digitization, there is still a lack of knowledge about online attributes and their role in facilitating CE. We close the portrayed knowledge gap by conducting a discrete-choice experiment with best to worst scaling and focusing on the effect of CE experience on the perception of a CE website by ranking nine online attributes, grouped in three subsets. We therefore contribute by identifying online attributes that are perceived as favorable for CE businesses and detect how participation in CE activities affects the perception of these attributes. We find that third-party associated online attributes (e.g., user reviews or third-party guarantees) rank significantly higher throughout CE consumption patterns of the sample, being always amongst the top three attributes. This novel finding on online preferences opens a new direction for further research, as well as allows practitioners to optimize online operations accordingly. Furthermore, we find that users without prior touchpoints with CE have a higher need for information about the business model as compared to CE active users who are more interested in community related attributes.
We conducted a random allocation experiment at fashion week in Berlin in 2017, testing how face-to-face (f2f) communication affects sales of a fashion start-up focusing on second-hand. The experiment revealed that 11% of guests of an f2f event afterwards turned paying customers with an average basket size 11.8% higher than the overall sales event average. We add insights to research on entrepreneurial practice as well as on offline operations in the context of circular consumption in fashion, exposing the leveraging effect of f2f communication for customer acquisition and revenue of start-ups in the field of sustainable fashion.
Künstliche Intelligenz in der Siedlungsabfallsortierung als Wegbereiter der Kreislaufwirtschaft
(2020)
Thema des vorliegenden Textes sind Wandlungsprozesse, die - so die Annahme - Voraussetzung sind, um eine ressourcenleichte Gesellschaft zu realisieren. Für den Fall, dass kleine Veränderungen oder Eingriffe nicht ausreichen, sondern vielmehr radikale Veränderungen im systemischen Gefüge erforderlich sind, entwickelt dieser Band das Konzept des "Systemsprungs" und dessen Rolle bei der Realisierung einer Ressourcenleichten Gesellschaft. Als Zugang zur Konzeption des Begriffs dienen bereits existierende Ansätze aus unterschiedlichen wissenschaftlichen Disziplinen. Es erfolgt dann mit der Untersuchung der Transformationsforschung die Bezugnahme auf einen Forschungsansatz, welcher den Übergang zu einer nachhaltigeren Lebensweise bzw. Gesellschaft zu erforschen und - als transformative Forschung - zu gestalten sucht. Kapitel 3 setzt die Diskussion aus dem Blickwinkel der Zukunftsforschung fort und analysiert verschiedene Konzepte von Auslösern radikaler Prozesse des Systemwandels.
Der vorliegende Bericht ist Band 4 der abschließenden Berichterstattung zum Projekt "Erfolgsbedingungen für Systemsprünge und Leitbilder einer Ressourcenleichten Gesellschaft". Es zeigt sich, dass in der Gesellschaft heute schon ein ausgeprägtes Bewusstsein für die Notwendigkeit des schonenden Umgangs mit natürlichen Ressourcen existiert. Gleichzeitig bestehen aber zahlreiche Ungewissheiten bezüglich der Möglichkeiten, dies umzusetzen. Es werden verschiedenste gesellschaftliche und wirtschaftliche Zwänge wahrgenommen, die einer entsprechenden Umsetzung derzeit entgegenstehen. Insgesamt aber wird in der Gesellschaft eine grundlegende Veränderungs-bereitschaft - oder oftmals eher noch: Veränderungssehnsucht - erkennbar. Als Motive dafür sind neben der Schonung begrenzt vorhandener natürlicher Ressourcen auch eine Entlastung bezüglich (in der Wahrnehmung der Betroffenen) oft ebenfalls bis an Belastbarkeitsgrenzen genutzter menschlicher Ressourcen relevant. Aus der Alltagsperspektive heraus sind in einer Ressourcenleichten Gesellschaft also ökologische und soziale Fragestellungen untrennbar miteinander verbunden.
Auf dem Weg in eine Ressourcenleichte Gesellschaft benötigen die betroffenen Akteurinnen und Akteure Leitbilder, an denen sie einen massiven Wandel wie diesen orientieren können. Der vorliegende Band stellt fünf solcher Leitbilder dar. Sie waren Hauptbestandteil des Projekts "Erfolgsbedingungen für Systemsprünge und Leitbilder einer ressourcenleichten Gesellschaft" und wurden mithilfe der Szenario -Methode erstellt. Inhaltlich wurden sie von Pionierinnen und Pionieren sowie Expertinnen und Experten ressourcenleichten Lebens erarbeitet, so dass alltagsnahe, praxistaugliche Elemente für die Leitbilder entwickelt wurden. Die Leitbilder zeigen eine große Spannbreite von Möglichkeiten, einen massiven gesellschaftlichen Wandel, wie er für eine Ressourcenleichte Gesellschaft nötig wäre, zu erreichen. Entsprechend unterschiedlich sind auch die möglichen Ressourcenschonungseffekte. Diese werden abschließend dargestellt und miteinander verglichen.
Digitalisation is in full swing and it is changing and influencing the world of the 21st century as no other dynamics of change has done before. Dealing with its impacts and at the same time shaping digitalisation itself is therefore a core task for achieving a globally sustainable transformation (German Advisory Council on Global Change - WGBU, 2019). But which direction should digitalisation take to ensure that it makes e ective contributions to globally sustainable development? And what is the specific approach needed to steer digitalisation in the right direction?
Because prevention is closely linked to complex consumption patterns, even cultural changes, such as increasing environmental awareness, changes in the average size of households or changes in the industrial structure of an economy, are relevant factors for the interpretation of changes in the generation of waste - it is more or less impossible to isolate the effect of specific waste prevention measures in this complex system. This must be considered, in particular, in international comparisons of policies and their potential transferability. The guidelines of the European Commission on waste prevention also point to the particular problem of data availability in the area of prevention: as waste statistics focus mainly on the treatment and fate of wastes, they are often of limited value for prevention of waste because they don't give sufficient information about their origins or reasons for their generation.
Against this background, this report has the following objectives:
Chapter 2 discusses strengths and weaknesses of typical waste-based prevention indicators; Chapter 3 analyses possible indicators that consider an upstream perspective and take into account the ecological rucksacks of products and components that have become waste; Chapter 4 focuses on specific product groups that could be targeted by waste prevention indicators.
In general, the report describes the complexity of measuring waste prevention and outlines pros and cons of possible approaches. The final chapter aims to draw rather pragmatic conclusions on possibly most preferable options for future policy-making.
Das Kreislaufwirtschaftsgesetz (KrWG) verlangt mit Bezug auf das Abfallvermeidungsprogramm (AVP) die Benennung zweckmäßiger Maßstäbe für Abfallvermeidungsmaßnahmen (AVM), anhand derer die Fortschritte bei der Entkopplung der mit der Abfallerzeugung verbundenen Auswirkungen auf Mensch und Umwelt vom Wirtschaftswachstum erfasst werden können. Das AVP benennt mögliche Indikatoren, allerdings ist unklar, inwieweit diese das Entstehen von Abfällen darstellen oder die Effekte von AVM abbilden können. Mögliche Bewertungsmaßstäbe für die Messung des Abfallvermeidungserfolges wurden analysiert, auf ihre Eignung geprüft und ein Set an Indikatoren erarbeitet, um eine kontinuierliche Messung des Erfolges von AVM zu ermöglichen.
Die Autoren verdeutlichen in diesem Papier, dass der Megatrend Digitalisierung nicht zwingend unkontrollierbar über die Wirtschaft und die Gesellschaft hereinbricht. Seine Wirkung hängt vom menschlichen Verhalten, von der Gestaltung neuer Prozessen in Organisationen, aber auch Anpassungen der gesetzlichen Rahmenbedingungen ab. Dieses sozio-kulturelle, organisatorische und institutionelle Umfeld der digitalen Innovationen könne und müsse im Sinne ökologischer Nachhaltigkeit beeinflusst werden. Politik sei hier aufgefordert auf der Basis fundierter Analysen flankierend tätig zu werden. Die Autoren fordern daher, für die Digitalwirtschaft eine eigene sektorspezifische Politik zu entwickeln, wie sie für andere umweltrelevante Sektoren - etwa die Energiewirtschaft, Chemieindustrie oder Autoindustrie - bereits etabliert ist.
Abfallwirtschaftliche Produktverantwortung unter Ressourcenschutzaspekten (RePro) : Abschlussbericht
(2019)
Elektro- und Elektronikaltgeräte enthalten eine Vielzahl von umwelt- und ressourcenrelevanten Metallen wie Gold und Neodym, welche derzeit noch nicht optimal recycelt werden. Im vorliegenden Projekt wurden die Mengenpotenziale von 10 dieser Metalle in 30 ressourcenrelevanten Elektrogerätearten quantifiziert und die bestehenden Verluste bei der Elektroaltgeräte-Entsorgung von der Sammlung über die Behandlung bis zur Metallrückgewinnung über Mengenstrombilanzen ermittelt, teilweise unterstützt durch Sortieranalysen und Behandlungsversuche. Die Studie leitet daraus Maßnahmenempfehlungen zur Optimierung der Erfassungsstrukturen sowie der Behandlungs- und Verwertungssysteme für Elektroaltgeräte aus privaten Haushalten zur Rückgewinnung der betrachteten Metalle ab.
Addressing food waste prevention is one target of the Sustainable Development Goals (SDGs) and a major task for the UN Environmental Programme and the European Commission. It is promising in terms of its environmental saving potential. However, it also leads to consumers being able to save money, which they then are likely to spend, thus again causing a negative environmental impact. This dimension of the so-called indirect rebound effect, which prevents the desired ecological benefits from being achieved, is investigated in this paper. By using a single-region environmentally extended input-output model from a production perspective, the indirect rebound effects from food waste prevention in Germany are analysed. Any political action needs to consider not only a differentiation in income class, but also alternative concepts such as the principles of sufficiency in order to achieve all ecological benefits and specifically the third target of SDG 12.
Eine sich vorrangig auf technologische Innovationen und Entlastungsgewinne stützende Wirtschafts- und Umweltpolitik wird für die dauerhafte Senkung der Ressourcennutzung nicht ausreichen. Es bedarf auch kultureller Veränderungen im Umgang mit Ressourcen und ambitionierter und wegweisender politischer Maßnahmen.
Each year, approximately one-third of the food produced for human consumption is lost or wasted worldwide. The waste of resources used for this food has significant environmental impacts in terms of land and water use as well as greenhouse gas emissions. Consequently, one of the targets of the UN sustainable development goals is to halve per capita global food waste at the retail and consumer levels and reduce food losses along production and supply chains by 2030. However, sufficient knowledge about the suitability of instruments for food waste prevention is still lacking. The purpose of this paper is therefore threefold: first, it outlines the generation and causes of food losses and waste. Second, it discusses good practices from different countries, such as laws to reduce food waste, voluntary agreements, awareness campaigns and results from behavioural economics. Finally, based on these findings, this paper identifies barriers to as well as requirements for the implementation of effective and efficient instruments.
Der Anlass für die Evaluation des Deutschen Ressourceneffizienzprogramms ProgRess ist seine Fortschreibung im Jahr 2020. In zahlreichen Interviews identifizieren die Autorinnen und Autoren Stärken und Schwächen und zeigen Wege für eine institutionelle und strategische Weiterentwicklung auf. Die Bedeutung des Programms wird als überwiegend positiv, die bisherigen Ressourceneffizienzwirkungen hingegen als durchwachsen bewertet. Den Umsetzungsstand konnten die Befragten wenig beurteilen, da Indikatoren bislang nur für einen Teil der Maßnahmen vorhanden sind. Eine Priorisierung der Aktivitäten, verbindlichere Instrumente und Zielvorgaben sowie eine bessere Mittelausstattung gehören zu den Empfehlungen.
Ziel dieses Berichts im Rahmen des Projekts "Erfolgsbedingungen für Systemsprünge und Leitbilder einer Ressourcenleichten Gesellschaft" ist es, eine solche Ressourcenleichte Gesellschaft zu definieren. Hierzu wird zunächst der Rahmen für eine Ressourcenleichte Gesellschaft durch Aufbereitung der relevanten Diskurse bestimmt. Kapitel 1 zeichnet die zeitgeschichtliche Entwicklung des ressourcenbezogenen Nachhaltigkeitsdiskurses von 1972 bis in die Gegenwart nach. Aus dieser Analyse werden relevante Gesichtspunkte für eine Ressourcenleichte Gesellschaft identifiziert und am Ende des Kapitels in einer Übersicht dargestellt. Das zweite Kapitel entwickelt darauf aufbauend den bereits genannten definitorischen Rahmen, d.h. es erfolgt eine grundsätzliche Erarbeitung der normativen Kriterien, die eine solche Gesellschaft ausmachen sollte. Kapitel 3 skizziert dann existierende Zugänge zur Ressourcenleichten Gesellschaft und zeigt wichtige Merkmale dieser Ansätze auf, welche zur Entwicklung der Ressourcenleichten Gesellschaft durch Kontrastierung oder Übernahme von Merkmalen beitragen können.
Der vorliegende Bericht fasst die Inhalte des Projekts "Erfolgsbedingungen für Systemsprünge und Leitbilder einer Ressourcenleichten Gesellschaft" im Überblick zusammen und diskutiert diese. Er stellt damit den ersten Band der Berichte zu diesem Projekt dar. Nach einer Einführung wird die Ressourcenleichte Gesellschaft als ressourcenschonende, weitgehend dematerialisierte Gesellschaft mit hoher Lebensqualität definiert. Es folgt eine Vorstellung der Methodik bei der Leitbildentwicklung und die Skizzierung der Leitbilder selbst. Daraufhin werden die Ergebnisse von Diskussionen zu den Leitbildern mit Expertinnen und Experten in sogenannten Stakeholder-Workshops auf der einen Seite sowie mit Vertreterinnen und Vertretern der verschiedenen sozialen Milieus in Fokusgruppen und einer moderierten Online Community auf der anderen Seite dargestellt.
Aufgrund der perspektivisch insbesondere mit dem benötigten weiteren Ausbau der erneuerbaren Energien verbundenen weiter zunehmenden Auswirkungen der Energiesystemtransformation auf Landschaft und Ökosysteme erscheint es angemessen, dass Politik und Gesellschaft die Naturverträglichkeit der Energiewende bzw. ihrer konkreten Ausgestaltung stärker in den Blick nehmen als bisher. Denn eine angemessene Berücksichtigung und darauf aufbauende weitest mögliche Minderung der negativen Einflüsse von Energiewende-Maßnahmen auf die Natur ist aus verschiedenen Gründen von Bedeutung: Zum einen ist die gesellschaftliche Akzeptanz für das Gelingen der Energiewende entscheidend und eine weitgehend naturverträgliche Ausgestaltung der Energiewende kann diese Akzeptanz befördern. Zum anderen sind intakte Ökosysteme für das menschliche Wohlergehen von hoher Bedeutung und es kann darüberhinaus argumentiert werden, dass ihnen unabhängig vom Wert für den Menschen auch ein intrinsischer Wert zugesprochen werden sollte. (Zusätzliche) Ökosystemstörungen sollten folglich so weit wie möglich vermieden werden.
Vor diesem Hintergrund hat der Naturschutzbund Deutschland e.V. das Wuppertal Institut beauftragt, in dem vorliegenden Bericht mögliche Maßnahmen zu identifizieren und zu beschreiben, die sowohl wesentliche Beiträge zur Erreichung der Ziele der Energiewende leisten können, deren Umsetzung gleichzeitig aber nach derzeitigem Wissensstand keine oder nur geringe negative Auswirkungen auf die Natur hätte. Der Bericht soll dabei helfen, die Aufmerksamkeit auf gegenwärtig nicht ausgeschöpfte, von der Energiepolitik und auch von vielen vorliegenden Energiewende-Studien nicht oder wenig beachtete aber wahrscheinlich naturschutzgerechtere Klimaschutzoptionen zu richten und diese Optionen besser zu verstehen.
Seit einigen Jahren erfährt die Abfallwirtschaft unter dem Schlagwort "Kreislaufwirtschaft" einen massiven Perspektivwechsel: Nach den Vorstellungen der Europäischen Kommission, die 2015 ihren Aktionsplan Kreislaufwirtschaft vorgestellt hat, sollen Abfälle in Zukunft in erster Linie als potenzieller Rohstoff gesehen werden; sowohl die in einzelnen Produkten enthaltenen natürlichen Ressourcen als auch deren ökonomischer Wert sollen am Ende der Nutzungsphase möglichst optimal erhalten bleiben. Angesichts der Rohstoffarmut in Europa sollen die Abfälle recycelt und wieder in den Produktionsprozess zurückfließen, um so auch langfristig die europäische Wettbewerbsfähigkeit sicherzustellen.
Damit geraten jedoch auch neue Fragen in den Fokus: Was genau passiert eigentlich mit unserem Müll? Wo bleibt er, und in welchen Teilen der Welt wird er recycelt? Und wer hat dann Zugriff auf die Rohstoffe, die aus ihm zurückgewonnen werden?
Digital platforms may yield a host of advantages in putting circular economy into effect. This paper analyses the related chances and discusses requirements of digital platforms for the realization of a circular economy. It specifically points to potential solutions offered by digital platforms for existing barriers. From there it identifies issues that need specific attendance to create economically and ecologically functional platforms. Three economically relevant perspectives are discussed for this: a management perspective, a legislative perspective and a social/systems perspective.
A policy mix for resource efficiency in the EU : key instruments, challenges and research needs
(2019)
Against the background of an often wasteful use of natural resources, the European Union has made resource efficiency a top policy priority. Policy formulation is, however, at a very early stage in many Member States, with often vague notions of what resource efficiency means, characterised by fragmented instruments and overlapping competencies. This paper develops a conceptual framework for defining, assessing and developing resource efficiency policy mixes. It argues that a mix of policies and instruments is best suited to overcoming the complex challenges of the 21st Century. Such a mix addresses multiple resource domains at a strategic, high level and contains interacting instruments targeting multiple actors, levels of governance and sectors and life-cycle stages of resource use. This paper looks at criteria for effective resource efficiency policy instruments, presents both an indicative policy mix across 9 policy domains and case studies (on environmental harmful subsidies, supply chain efficiency in food systems and product-service systems) and identifies key challenges to overcome trade-offs in instrument design, maximise synergies, reduce conflicts, promote coherence, coordinate activities and move from theory to practice. Research needs are discussed regarding who shall devise, implement, and coordinate such a policy mix, considering negotiating power, timing and complexity.
Digitaler Kreislauf
(2018)
Die ersten Stufen der Abfallhierarchie : Abfallvermeidung und Vorbereitung zur Wiederverwendung
(2018)
In this paper three approaches on transitions pathways are combined to study the role of agricultural nature conservation in the Dutch land use domain for achieving internationally agreed climate and biodiversity targets. The three perspectives used are the Multilevel Perspective (MLP), Initiative Based Learning (IBL) and Integrated Assessment Modelling (IAM). The analysis provides insights in how the combination of different research approaches can lead to more comprehensive policy advice on how agricultural nature conservation could help to achieve internationally agreed sustainability goals related to climate change and biodiversity. IAM shows under which conditions agricultural nature conservation could be consistent with European and global long-term goals regarding food security, biodiversity and climate. MLP provides insight into the extent in which agricultural nature conservation has affected or changed the existing nature and agricultural regimes. IBL, finally, reveals the challenges of encouraging agricultural nature conservation with policy measures. Our analysis shows that a combined perspective provides a deeper understanding of the underlying processes, reasons and motives of agricultural nature conservation, leading to more comprehensive policy recommendations.
Deutschland verfügt über eines der weltweit führenden Systeme im Bereich der Abfallwirtschaft - vorrangiges Ziel ist es, Abfall sicher und umweltschonend zu entsorgen. Allerdings kommen nur ca. 14 Prozent der in der Industrie eingesetzten Rohstoffe aus dem Recycling, der Rest sind noch immer Primärmaterialien. Kreislaufwirtschaft findet noch nicht ausreichend statt: Rezyklate, aus Abfällen gewonnene Sekundärrohstoffe, werden noch weit unterhalb der möglichen Mengen in Produktions- und Nutzungsprozesse zurückführt. Werteverlust, Abhängigkeit von volatilen Rohstoffmärkten, geringere Ressourcenproduktivität und Externalitäten in Form von Umweltverschmutzung ließen sich damit vermeiden. Eine Digitalisierungsoffensive in Industrie und Abfallwirtschaft könnte dies bewirken. Eine Studie des Bundesministeriums für Umwelt, Naturschutz, Bau und Reaktorsicherheit (BMUB) verweist darauf, dass kein Umweltleitmarkt so stark von der Digitalisierung profitieren könnte wie die Kreislaufwirtschaft - und dass gleichzeitig kein Sektor bisher so schlecht aufgestellt ist.
Germany's waste management system is one of the world's most advanced - its primary objective is to dispose of waste in a way that is safe for both people and the environ- ment. However, only about 14 per cent of the raw materials used in industry are derived from recycling processes; the remainder are still sourced from primary materials. The circular economy is not yet being implemented on a large enough scale. Recyclates or recycled materials, i.e. secondary raw materials recovered from waste, are being fed back into production and usage processes at volumes that are far below what is possible. If this system were to be improved, loss of value, dependence on volatile commodity markets, lower resource productivity, and externalities in the form of environmental pollution could be avoided. A drive towards digitalisation in industry and the waste management sector could make this happen. A study by the German Federal Ministry for the Environment, Nature Conservation, Building and Nuclear Safety (BMUB) indicates that no other lead market in the environmental sector stands to benefit from digitalisation more than the circular economy - and that, at the same time, no sector has ever been so poorly positioned.
Assessing global resource use : a systems approach to resource efficiency and pollution reduction
(2017)
The growing demand for timber, in particular for renewable energy, increases pressures on global forests and requires a robust monitoring system to ensure sustainability. This article takes a first step toward more systemic monitoring by asking how the global use of forests by EU consumers can be accounted for. Specifically, this article builds on and develops the method of global land use accounting to account for the EU-27's consumption of primary timber between 2002 and 2011 in terms of both volume and forest area. It assesses international trade flows for around 100 commodities and converts them into a volume of primary raw timber based on conversion values. Results reveal that both imports and exports increased over the assessed time period, with primary EU-27 timber estimated to be around 1 m3/cap in 2011. Gaps, uncertainty and a lack of harmonization regarding especially trade data and conversion values are key challenges to further improving the robustness of the method and reliability of results. Future research may focus on improving the method to address in particular recycled and recovered flows as well as the question of whether area or volume is the most appropriate metric for further development of a forest footprint indicator.
The growing demand for wood to meet EU renewable energy targets has increasingly come under scrutiny for potentially increasing EU import dependence and inducing land use change abroad, with associated impacts on the climate and biodiversity. This article builds on research accounting for levels of primary timber consumption - e.g., toward forest footprints - and developing reference values for benchmarking sustainability - e.g., toward land use targets - in order to improve systemic monitoring of timber and forest use. Specifically, it looks at future trends to assess how current EU policy may impact forests at an EU and global scale. Future demand scenarios are based on projections derived and adapted from the literature to depict developments under different scenario assumptions. Results reveal that by 2030, EU consumption levels on a per capita basis are estimated to be increasingly disproportionate compared to the rest of the world. EU consumption scenarios based on meeting around a 40% share of the EU renewable energy targets with timber would overshoot both the EU and global reference value range for sustainable supply capacities in 2030. Overall, findings support literature pointing to an increased risk of problem shifting relating to both how much and where timber needed for meeting renewable energy targets is sourced. It is argued that a sustainable level of timber consumption should be characterized by balance between supply (what the forest can provide on a sustainable basis) and demand (how much is used on a per capita basis, considering the concept of fair shares). To this end, future research should close data gaps, increase methodological robustness and address the socio-political legitimacy of the safe operating space concept towards targets in the future. A re-use of timber within the economy should be supported to increase supply options.
With the introduction of the Roadmap to a Resource Efficient Europe (2011) and the more recent commitment of The Action Plan towards the Circular Economy (2015), the European Commission (EC) has expressed its fundamental interest to substantially improve the resource efficiency of the European economy and enable the transition towards the Circular Economy (CE). This policy push has meanwhile been complemented by some quite ambitious national programmes for RE and CE and institutional advances but it is not yet bound to targets or mandatory reporting.
Against this background, the objective of this paper is to give a comprehensive overview of the current policy frameworks at EU and a selection of MSs and provide insights into the elements shaping policy processes. The analytical framework relies on three essential interconnected components: the policy framework, the economic incentive system and economic side policies which are relevant in the context of RE and CE and actor constellations. The paper does this looking at the interface between EU-MSs. The analysis is based on different empirical surveys in which the policy development is observed and discussed (EEA 2011, 2016a, 2016b, EIO 2013, 2014, 2016) and a comprehensive review of legislative and policy frameworks at the EU and selected MSs, undertaken as part of the project POLFREE (Policy option for a Resource-Efficient Economy) (Domenech et al., 2014, Bahn-Walkowiak et al., 2014). The analysis reveals that policy frameworks for RE/CE are complex and fragmented as competing goals and visions reduce effectiveness of measures. The paper makes recommendations as to how EU and MS policies could improve RE in a coordinated way, but recognizes that achieving such coordination will be challenging in the current political context.
This report is a deliverable of the project "Bridging the raw materials knowledge gap for reuse and remanufacturing professionals" (ReUK) and of the second work package "Identification of knowledge gaps and industry needs". Funded by the Knowledge and Innovation Community for Raw Materials, ReUK will develop life-long education services tailor-made for the needs of the reuse- and remanufacturing sector in Europe. The present "Report on ten knowledge gaps" represents a further key step in delivering these services.
This report examines the role of waste management in the context of a circular economy transition. Key challenges relate to moving beyond the perception of "waste as a problem" to "waste as a resource". To this end high levels of cooperation are needed between the waste industry and enterprises engaged in circular economy business models. Collecting high quality waste streams for re-use, remanufacturing and recycling also requires citizen engagement and integrated infrastructure development from the municipal to the EU level. Ultimately, both waste prevention as well as a widespread growth in circular economy activities will require a coherent and holistic approach that takes recovery options into account at every stage of the product life cycle. Co-benefits will include reducing environmental burden as well as creating both high-skilled and low-skilled jobs for an inclusive, green economy. In concrete terms, this report examines five waste streams identified in the EU's Circular Economy Action Plan: municipal waste, packaging waste, food waste, bio-waste and critical raw materials. It looks at the current state of policy development, presents trends and data comparing Member State performance, reviews the state of technological development, and assesses employment opportunities relevant to each waste stream in the overarching context of assessing progress toward the circular economy transition in the EU. Case studies of specific options for collecting and treating waste based on experiences in Denmark, Italy and Slovenia complement the more macro-level analysis of trends. Finally, key policy options are identified, in particular focused on ways to prevent waste, align circular economy and waste management objectives and improve the quality and reliability of indicators toward more robust monitoring.
The paper undertakes a closer look on the relation of institutions and policy mixes within the multi-level scope of the European Union in the policy field of resource efficiency and maps out different configurations. Based on an extensive analysis of scope, foci, instruments and especially the distribution of institutional responsibilities in 32 EU countries, the paper aims to amplify the categorisation of policy mix characteristics developed by Rogge and Reichardt by considerations on the institutional background of policy mixes. It specifically brings into question the potential impact of different institutional settings on the consistency and coherence of approaches in this evolving policy field. Resource efficiency is an eminently cross-cutting policy concept and a specific interesting unit of analysis due to the observable heterogeneity of implementation approaches. However, it is still mainly disconnected from energy issues and, at the same time, EU policy has shifted to the circular economy approach, indicating further need for streamlining with the resource efficiency approach. The paper stresses the need to include institutional and multi-level governance issues for policy design and the development of policy mixes, especially in the context of the now refocused resource efficiency agenda to the transition to a circular economy.
Against the background of the question which role tax based instruments have to play in policy mixes to counteract the unbroken growth trend of global resource use, this chapter initially describes how the insights from a country comparative study on national resource policy frameworks could be linked to instruments for the internalisation of external environmental costs on a European scale. On the basis of a project specific but substantiated resource use vision and potential governance principles for three transition processes to reach the goals, the tax concepts are subsequently connected to simulation scenarios in order to illustrate the resource impacts that could be achieved by those policy reforms. Conclusively, barriers to such fundamental changes of framework conditions are briefly reflected upon and some conclusions are drawn.
Facing an ever-increasing global consumption of natural resources and related environmental as well as socioeconomic challenges, the transition towards a circular economy will be of crucial importance. The issue is high on the political agenda, especially since the European Commission published its Circular Economy Action Plan in December 2015. Apparently different stakeholders have very different perceptions of the concept as well as different expectations for its implementation. During a workshop series by the Friedrich Ebert Stiftung, experts from policy, science, administration, industry and unions discussed key issues for the circular economy: What's the status quo in Germany? How can the circular economy be implemented in a comprehensive and efficient way? Which instruments are available? Is the legal framework on EU and national level sufficient for the evolvement of a circular economy? What is the role of the consumer? What are the economic potentials especially with regard to job creation? How can research and innovation policy contribute to this process? This paper aims to summarise the different discussions.
Stepping up waste prevention : challenges and opportunities for national waste prevention programmes
(2017)
To minimize the impact of end-of life vehicles on the environment they have to be managed in accordance with the legal requirements. Against this background it is important to comprehend the whereabouts of permanently decommissioned passenger cars. From the available statistical sources it was only possible to account for the whereabouts in parts for the last years. The subject-matter of the research project was the closure of this "statistical gap" to the maximum extent possible. The objectives of the project were the identification of the possible reasons underlying the "statistical gap", the determination, itemisation and, to the maximum extent possible, quantification of information on the actual whereabouts of permanently decommissioned vehicles and the development of measures and instruments that can be used to permanently improve the data situation.
Altfahrzeuge enthalten sowohl Schadstoffe als auch Wertstoffe und sind daher nach den Vorgaben der Altfahrzeugverordnung ordnungsgemäß zu behandeln und zu verwerten. Gefahren für die Umwelt können so vermieden und Wertstoffe zurückgewonnen werden. Dementsprechend ist es wichtig, dass die ordnungsgemäße Behandlung und Verwertung von Altfahrzeugen auch belegt werden kann. Grundlegend ist vor diesem Hintergrund, dass nachvollziehbar ist, wo Fahrzeuge verbleiben, die außer Betrieb gesetzt und in Deutschland nicht wieder zum Straßenverkehr zugelassen werden. Mit den vorliegenden statistischen Angaben war dies in den letzten Jahren nur teilweise möglich. Beispielsweise war vor Projektbeginn für das Jahr 2013 der Verbleib von 1,18 Millionen Fahrzeugen nicht aufklärbar. Ziel des Vorhabens war es daher, den Verbleib von außer Betrieb gesetzten Fahrzeugen möglichst lückenlos aufzuklären. Darauf aufbauend erarbeiteten die Autoren Vorschläge, um die Datenlage dauerhaft zu verbessern.
Renewable energy targets in the European Union (EU) have raised the demand for timber and are expected to increase dependence on imports. However, EU timber consumption levels are already disproportionally high compared to the rest of the world. The question is, how much timber is available for the EU to sustainably harvest and import, in particular considering sustainable forest management practices, a safe operating space for land-system change, and the global distribution of "common good" resources. This article approaches this question from a supply angle to develop a reference value range for the current as well as future sustainable supply of timber at the EU-27 and global levels. For current supply estimates, national-level data on forest area available for wood supply, productivity in that area, as well as the rate available for harvest were collected and aggregated into three potential supply scenarios. For future supply estimates, a safe operating space scenario halting land use change, a sensitivity analysis, and a literature review were performed. To provide both a comparison of global versus EU sustainable supply capacities and to develop a benchmark toward evaluating and comparing levels of consumption to sustainable supply capacities, per capita calculations were made. Results revealed that the per capita sustainable supply potential of EU forests is estimated to be around three times higher than the global average in 2050. Whether a global or EU reference value is more appropriate for EU policy orientation, considering both strengthened economic and cultural ties to the forest in forest-rich countries as well as the need to prevent problem shifting associated with exporting land demands abroad, is discussed. Further research is needed to strengthen and harmonize data, improve methods for modeling future scenarios and incorporate interdisciplinary and multi-stakeholder perspectives toward the development of robust and politically relevant reference values for sustainable consumption levels.
The contribution of the EU bioeconomy to sustainable development depends on how it is implemented. A high innovation potential is accompanied by considerable risks, in particular regarding the exacerbation of global land use conflicts. This article argues that a systemic monitoring system capable of connecting human-environment interactions and multiple scales of analysis in a dynamic way is needed to ensure that the EU bioeconomy transition meets overarching goals, like the Sustainable Development Goals. The monitoring should be centered around a dashboard of key indicators and targets covering environmental, economic, and social aspects of the bioeconomy. With a focus on the land dimension, this article examines the strengths and weakness of different economic, environmental and integrated models and methods for monitoring and forecasting the development of the EU bioeconomy. The state of research on key indicators and targets, as well as research needs to integrate these aspects into existing modeling approaches, are assessed. The article concludes with key criteria for a systemic bioeconomy monitoring system.
Bisher ist die vollständige Schließung von Stoffkreisläufen durch die Verwendung von Abfällen als Ressource in Deutschland nur eine Vision. Der Beitrag führt das Konzept der Kreislaufwirtschaft ein und konkretisiert es am Beispiel der Reparatur und Wiederverwendung von Produkten. Anschließend werden Hemmnisse betrachtet, die es auf dem Weg zur Kreislaufwirtschaft zu überwinden gilt und mögliche Lösungsansätze beschrieben.
Im Rahmen des Projektes werden mögliche Bewertungsmaßstäbe für die Erfolgsmessung von Abfallvermeidungsmaßnahmen vertiefend analysiert und bewertet sowie ein passendes Set an Indikatoren erarbeitet und ein geeignetes Daten-Erfassungskonzeptes entwickelt. Bezogen auf das Datenerfassungskonzept gibt es im Bereich Wiederverwendung (WV) erhebliche Datenlücken zu den tatsächlich wiederverwendeten Mengen gebrauchter Produkte. Der vorliegende Zwischenbericht enthält die Ergebnisse einer ersten Datenerhebung auf Basis einer Befragung der 400 Wiederverwendungseinrichtungen in Deutschland. Ergänzend wurde das Potential der aus Online-Angeboten gewinnbaren Gebrauchtprodukte zur WV recherchiert.