Refine
Year of Publication
Document Type
- Report (72)
- Peer-Reviewed Article (71)
- Part of a Book (47)
- Conference Object (25)
- Working Paper (20)
- Book (8)
- Contribution to Periodical (8)
- Doctoral Thesis (3)
- Periodical Part (3)
Language
- English (257) (remove)
Division
- Stoffströme und Ressourcenmanagement (257) (remove)
The global demand for timber is increasing, with prognoses for the EU showing particularly high growth to meet renewable energy targets. However, there are limited options to meet rising timber demands within the EU, and global land competition to meet world food, energy and material needs, as well as to conserve high value nature areas, is increasing. This dissertation addresses the knowledge gap between the pressures of increased land use abroad and the underlying drivers of land use change. It argues that there is a high risk of problem shifting if EU policies to increase timber consumption are not accompanied by a monitoring system that accounts for consumption levels and provides a benchmark for sustainability.
The German government has set itself the target of reducing the country's GHG emissions by between 80 and 95% by 2050 compared to 1990 levels. Alongside energy efficiency, renewable energy sources are set to play the main role in this transition. However, the large-scale deployment of renewable energies is expected to cause increased demand for critical mineral resources. The aim of this article is therefore to determine whether the transformation of the German energy system by 2050 ("Energiewende") may possibly be restricted by a lack of critical minerals, focusing primarily on the power sector (generating, transporting and storing electricity from renewable sources). For the relevant technologies, we create roadmaps describing a number of conceivable quantitative market developments in Germany. Estimating the current and future specific material demand of the options selected and projecting them along a range of long-term energy scenarios allows us to assess potential medium- or long-term mineral resource restrictions. The main conclusion we draw is that the shift towards an energy system based on renewable sources that is currently being pursued is principally compatible with the geological availability and supply of mineral resources. In fact, we identified certain sub-technologies as being critical with regard to potential supply risks, owing to dependencies on a small number of supplier countries and competing uses. These sub-technologies are certain wind power plants requiring neodymium and dysprosium, thin-film CIGS photovoltaic cells using indium and selenium, and large-scale redox flow batteries using vanadium. However, non-critical alternatives to these technologies do indeed exist. The likelihood of supplies being restricted can be decreased further by cooperating even more closely with companies in the supplier countries and their governments, and by establishing greater resource efficiency and recyclability as key elements of technology development.
Biodiversity loss is widely recognized as a serious global environmental change process. While large-scale metal mining activities do not belong to the top drivers of such change, these operations exert or may intensify pressures on biodiversity by adversely changing habitats, directly and indirectly, at local and regional scales. So far, analyses of global spatial dynamics of mining and its burden on biodiversity focused on the overlap between mines and protected areas or areas of high value for conservation. However, it is less clear how operating metal mines are globally exerting pressure on zones of different biodiversity richness; a similar gap exists for unmined but known mineral deposits. By using vascular plants' diversity as a proxy to quantify overall biodiversity, this study provides a first examination of the global spatial distribution of mines and deposits for five key metals across different biodiversity zones. The results indicate that mines and deposits are not randomly distributed, but concentrated within intermediate and high diversity zones, especially bauxite and silver. In contrast, iron, gold, and copper mines and deposits are closer to a more proportional distribution while showing a high concentration in the intermediate biodiversity zone. Considering the five metals together, 63% and 61% of available mines and deposits, respectively, are located in intermediate diversity zones, comprising 52% of the global land terrestrial surface. 23% of mines and 20% of ore deposits are located in areas of high plant diversity, covering 17% of the land. 13% of mines and 19% of deposits are in areas of low plant diversity, comprising 31% of the land surface. Thus, there seems to be potential for opening new mines in areas of low biodiversity in the future.
National policies for resource efficiency and waste management : structures, impacts, and deficits
(2015)
The current utilisation of natural resources in Germany and Europe is not sustainable, as inter alia stated by the German government as well as by the European Commission. At the same time, increased resource efficiency could lead to various environmental but also economic benefits. This brief study commissioned by Changing Markets presents developments in the field of resource efficiency policies, analyses the status quo of resource consumption with a special focus on fast moving consumer goods and describes potential effects of resource conservations.
In the future, the capacities of renewable SNG (synthetic natural gas) will expand significantly. Pilot plants are underway to use surplus renewable power, mainly from wind, for electrolysis and the production of hydrogen, which is methanated and fed into the existing gas pipeline grid. Pilot projects aim at the energetic use of SNG for households and transport in particular for gas fueled cars. Another option could be the use of SNG as feedstock in chemical industry.
The early stage of development raises the question of whether SNG should be better used for mobility or the production of chemicals. This study compares the global warming potential (GWP) of the production of fossil natural gas (NG) and carbon-dioxide (CO2)-based SNG and its use for car transport versus chemical use in the form of synthesis gas. Since the potential of wind energy for SNG production is mainly located in northern Germany, the consequences by a growing distance between production in the North and transport to the South of Germany are also examined.
The results indicate that CO2-based SNG produced with wind power would lead to lower GWP when substituting NG for both uses in either transport or chemical production. Differences of the savings potential occur in short-distance pipeline transport. The critical factor is the energy required for compression along the process chain.
Reforming the EU VAT system to support the transition to a low-carbon and resource efficient economy
(2015)
This chapter discusses the question of ecologically differentiated value added taxes (VAT) as a tool to overcome tax-related cognitive barriers by connecting to an existing tax system. This is elaborated along several aspects: (a) The role indirect of consumption taxes for the economy, (b) the legal issues of the VAT system, (c) the EU harmonization efforts in this context, (d) the distributional implications of value added taxes. Following this, the chapter develops a proposal for a VAT reform (e). To this end, it looks at potential and existing differentiations between sectors, products and services, and product and service groups and turns to those consumption areas that are widely identified as particularly resource and carbon intensive and sets out how a harmonization of the overall system and an ecological differentiation in single consumption areas could be brought together. Potential impacts and effects are briefly discussed (f) and some conclusions are drawn (g). The subject addressed in the chapter is relevant from a policy perspective but mainly descriptive: It does not use innovative qualitative and quantitative tools.
The rising global demand for metals in a context of declining ore grades is driving the opening of new mines and the expansion of existing ones, disturbing substantial land areas (especially by open pits). However, how much land is currently disturbed globally? How much land could be disturbed by metal mining in 2050? This study investigates the global area disturbed by mining of iron, bauxite, copper, gold, and silver for the first time. The first part consists of the calculation of the specific land requirements, i.e. the area newly disturbed caused by the ore extraction at the mine site. The second part addresses the global area disturbed in the year 2011 whereas the third presents scenarios of how such area might evolve until 2050. The last part addresses the current and future pressures on global biodiversity by metal mines and shows possibilities for the future opening of new mines in low biodiversity areas, alleviating pressures in high biodiversity ones. This study presents the findings of the author´s dissertation hoping they are used as a frame to develop policies and incentives to reduce the amount of area directly disturbed by mines and their pressures on biodiversity.
The CO2 utilisation is discussed as one of the future low-carbon technologies in order to accomplish a full decarbonisation in the energy intensive industry. CO2 is separated from the flue gas stream of power plants or industrial plants and is prepared for further processing as raw material. CO2 containing gas streams from industrial processes exhibit a higher concentration of CO2 than flue gases from power plants; consequentially, industrial CO2 sources are used as raw material for the chemical industry and for the synthesis of fuel on the output side. Additionally, fossil resources can be replaced by substitutes of reused CO2 on the input side. If set up in a right way, this step into a CO2-based circular flow economy could make a contribution to the decarbonisation of the industrial sector and according to the adjusted potential, even rudimentarily to the energy sector.
In this study, the authors analyse potential CO2 sources, the potential demand and the range of applications of CO2. In the last chapter of the final report, they give recommendations for research, development, politics and economics for an appropriate future designing of CO2 utilisation options based upon their previous analysis.
A reduction in working hours is being considered to tackle issues associated with ecological sustainability, social equity and enhanced life satisfaction - a so-called triple dividend. With respect to an environmental dividend, the authors analyse the time use rebound effects of reducing working time. They explore how an increase in leisure time triggers a rearrangement of time and expenditure budgets, and thus the use of resources in private households. Does it hold true that time-intensive activities replace resource-intensive consumption when people have more discretionary time at their disposal? This study on environmental issues is complemented by introducing the parameters of voluntary social engagement and individual life satisfaction as potential co-benefits of rebound effects. In order to analyse the first dividend, a mixed methods approach is adopted, enabling two models of time use rebound effects to be applied. First, semi-standardised interviews reveal that environmentally ambiguous substitutions of activities occur following a reduction in working hours. Second, estimates for Germany from national surveys on time use and expenditure show composition effects of gains in leisure time and income loss. For the latter, we estimate the marginal propensity to consume and the marginal propensity to time use. The results show that time savings due to a reduction in working time trigger relevant rebound effects in terms of resource use. However, both the qualitative and quantitative findings put the rebound effects following a reduction in working time into perspective. Time use rebound effects lead to increased voluntary social engagement and greater life satisfaction, the second and third dividends.
For 20 years, the number of resource policy approaches with direct and indirect relations to raw materials, resource and material efficiency has grown enormously at national and international level. This discussion paper makes an inventory of different political and regulatory approaches that contain a direct or indirect reference to resources such as construction materials, industrial minerals, or metals. They are examined and evaluated regarding foci and resource priorities as well as further categories such as target lines, governance levels, indicators used, integration into wider target systems, specification, and implementation. The aim is to provide an overview of the spectrum of resource objectives in international, European, and national strategies, programs, and initiatives. The closer analysis of raw material targets embedded in the policy programs and legal approaches reveals that most goals lack a time frame and a concrete vision, thus remain at a strategic level. To complement the overview, the state of research in the field of modeling and simulation is briefly discussed. Concluding remarks concerning their relation to the objectives identified and the task of target setting complete the discussion.
Consumption-based CO2 emissions, which are commonly calculated by means of environmentally extended input-output analysis, are gaining wider recognition as a way to complement territorial emission inventories. Although their use has increased significantly in the last years, insufficient attention has been paid to the methodological soundness of the underlying environmental extension. This should follow the internationally agreed accounting rules of the System of Environmental-Economic Accounting, which addresses the activities undertaken by the residents of a country, independent from where these take place. Nonetheless, some footprint calculations use extensions that account for all the activities within the territory, which leads to methodological inconsistencies. Thus, this article introduces the most relevant conceptual differences between these accounting frameworks and shows the magnitude of the gap between them building on the data generated for the EXIOBASE model. It concludes that the differences are high for many countries and their magnitude is increasing over time.
The paper reflects the hypothesis that those technological and institutional innovations survive which extend the safe operating range (SOR) of the Humans-Technologies-Institutions (HTI) system (e.g. companies, cities, regions and countries). The multidimensional SOR of a country comprises in particular safe livelihood, quality of life, security, monetary stability, supply security and quality of the environment. A "mechanism of progress" is described involving the search for higher safety and independence of constraints. With innovation and learning in a key role, the mechanism leads to a relative decoupling of resource use and economic value added and a growing share of knowledge generation in the economy. Competition of HTI systems for scarce resources may lead to independence strategies such as enhanced resource efficiency. It may also lead to cooperation of competing HTI systems facilitated by new institutions thus forming an HTI system at higher level of complexity. While the consortium could coordinate their resource consumption within the boundaries of safe operating space, the partner HTI systems would further expand their SOR. Data is provided that net resource importing countries have developed higher material productivity thus increasing their independence from resource supply, and countries with such capability have gained higher innovation capacity.
A lack of proper treatment infrastructure and sufficient capacity for municipal solid waste (MSW) treatment is a crucial barrier for the environmentally sound management of waste. However, overcapacities, especially for waste incineration, also have to be taken into account regarding their potential impacts on recycling markets and waste treatment prices. This paper provides a comprehensive overview of existing MSW incineration plants and their capacities within Europe. In combination with the analysis of imports and exports of MSW for incineration, it provides an indication of over- and undercapacities for incineration plants. Among other things, the results show that in six of the 32 countries analysed in this study, capacities exceed more than 50% of the annual waste generation, while in two countries the total amount of waste generated annually is not enough to fill all the incineration plants.
The bioeconomy is gaining growing attention as a perceived win-win strategy for environment and economy in the EU. However, the EU already has a disproportionately high global cropland footprint compared to the world average, and uses more cropland than domestically available to supply its demand for agricultural products. There is a risk that uncontrolled growth of the bioeconomy will increase land use pressures abroad. For that reason, a monitoring system is needed to account for the global land use of European consumption. The aim of this paper is to take a closer look at the tools needed to monitor global cropland footprints, as well as the targets needed to benchmark development. This paper reviews recent developments in land footprint accounting approaches and applies the method of global land use accounting to calculate the global cropland footprint of the EU-27 for the years between 2000 and 2011. It finds a slight decrease in per capita cropland footprints over the past decade (of around 1% annually, reaching 0.29 ha/cap in 2011) and advocates promoting a further decrease in per capita cropland requirements (of around 2% annually) to reach global land use targets for keeping consumption within the safe operating space of planetary boundaries by 2030. It argues that strategic land reduction targets may still go hand in hand with the growth of a smart, innovative and sustainable bioeconomy by reinforcing the need for policies that support greater efficiency across the life-cycle and reduce wasteful and excessive consumption practices. Recommendations for further improving land footprint accounting are given.
The transition towards a circular economy is high on the political agenda and support for innovative business models can be seen as one of the key strategies for its implementation. Nevertheless most of these business models rely on an increasing generation of waste and thus undermine the prevention of waste as top of the waste hierarchy. The paper aims to link this debate to more systemic eco-innovations that offer economic market potentials by reduced material inputs and waste generation. This directs the attention to sufficiency strategies that surpass the level of individual consumer choices and regards the potentials of entrepreneurial sufficiency strategies. It takes the example of waste contracting modelsin Germany as a possible approach of resource-light business models that provide existing utility aspects with altered consumption patterns and decreased resource consumption. It describes environmental and economic benefits and draws conclusions on necessary policy framework conditions.
A future-oriented and sustainable "Leasing Society" is based on a combination of new and innovative serviceoriented business models, changed product and material ownership structures, increased and improved eco-design efforts, and reverse logistic structures. Together these elements have the potential to change the relationship between producers and consumers, and thereby create a new incentive structure in the economy regarding the use and re-use of resources. While the consumer in a leasing society buys a service (instead of a product), the producer in a leasing society retains the ownership of the product (instead of selling it) and sells the service of using the product. This creates producer incentives to re-use, remanufacture, and recycle products and materials and could become a cornerstone of the circular economy, depending on how the leasing society is implemented. While a predominantly positive picture of the success of a leasing society model and related business cases emerges from the bigger part of the available literature, this paper argues that the resource efficiency of respective business cases is highly dependent on the specific business case design. This paper develops a more cautious and differentiated definition of the leasing society by discussing relevant mechanisms and success factors of leasing society business cases. The leasing society is discussed from a micro business-oriented and a macro environment-oriented perspective complemented by a discussion of conditions for successful business models that reduce environmental impacts and resource footprints.
In early September 2014, about 4.000 scientists, activists and artists at the 4th International Conference on Degrowth sent out two messages.
1. Industrialized societies will change, either by disaster or by design. Accelerated resource exploitation and climate change can force societies into a transition. Or they swiftly develop new forms of economic, political and social organization which respect the planetary boundaries.
2. "Degrowth" has become a new social movement which translates scientific insights into cultural change, political change and social practice. Hence, the conference itself was an experiment on the potentials and limits of share economy, commoning and sufficiency.
A team of young scholars and activists from different German research institutes and non-govern- mental organisations prepared the conference. The team of the Wuppertal Institute was partly involved in the preperation of the conference. Scientists from all research groups took part in the conference, presenting and discussing project results.
The publication is a collection of contributions of the Wuppertal Institute to the conference and covers pivotal issues of the degrowth-debate: indicator development (Freyling & Schepelmann), working time reduction (Buhl), feminist theory (Biesecker & Winterfeld), and urban transition (Best).
Many countries have started to develop policy programs for the sustainable use of natural resources. Indicators and targets can cover both a territorial and a life-cycle-wide global perspective. This article focuses on how a safe operating space for global material resource use can be outlined based on existing economy-wide material flow indicators. It reflects on issues such as scale and systems perspective, as the choice of indicators determines the target "valves" of the socio-industrial metabolism. It considers environmental pressures and social aspects of safe and fair resource use. Existing proposals for resource consumption targets are reviewed, partially revisited, and taken as a basis to outline potential target values for a safe operating space for the extraction and use of minerals and biomass by final consumption. A potential sustainability corridor is derived with the Total Material Consumption of abiotic resources ranging from 6 to 12 t/person, the Total Material Consumption of biotic resources not exceeding 2 t/person, and the Raw Material Consumption of used biotic and abiotic materials ranging from 3 to 6 t/person until 2050. For policy, a "10-2-5 target triplet" can provide orientation, when the three indicators are assigned values of 10, 2, and 5 t/person, respectively.
Measuring progress towards sustainable development requires appropriate frameworks and databases. The System of Environmental-Economic Accounts (SEEA) is undergoing continuous refinement with these objectives in mind. In SEEA, there is a need for databases to encompass the global dimension of societal metabolism. In this paper, we focus on the latest effort to construct a global multi-regional input-output database (EXIOBASE) with a focus on environmentally relevant activities. The database and its broader analytical framework allows for the as yet most detailed insight into the production-related impacts and "footprints" of our consumption. We explore the methods used to arrive at the database, and some key relationships extracted from the database.
A desirable future critically depends on our ability to ensure the supply of key resources while simultaneously respecting planetary boundaries. This paper looks at the potential implications of living within the "safe operating space" for people, business and the economy. It develops a positive vision of the future based on three pillars: a safe and fair use of global resources, a sustainable society, and a transformed economy. We review and build on recent sustainability visions to develop a holistic reflection on what life in 2050 could look like, and explore the key changes in the economy needed to get there. In particular we show that resource efficiency requires a systemic shift in values, innovation, governance and management regimes. We present a bold vision for Europe underlined by indicators and targets, explore transition challenges to getting there and conclude with a list of key policies needed for overcoming challenges and reaching the vision.
This report details current and potential recycling of critical metals in Waste from Electrical Electronic Equipment (WEEE). The term "critical metals" is used instead of "rare metals" because the concept incorporates not only supply but also demand. The EU needs access to these metals and recycling can be an important part of the supply-strategy.
The study shows that the current recycling of critical metals in WEEE is very low, but that the potential amount could be increased threefold within 2015. Improving of the recycling of critical metals requires a variety of initiatives tackling different week point in the overall process: better collection, better pre-processing and end-processing, limiting the export of WEEE or used products out of the EU and better design of the EEE-products.
This study shows that data on sales volumes, WEEE composition and the composition of critical metals in EEE is currently insufficient for detailed analysis and monitoring, and addressing this should be a priority. Further, more detailed information on components used in EEE product groups would enable recyclers to identify and access the most materially important components. Dialog between recyclers, smelters and manufacturers could also facilitate product design that supports the recycling process.
Critical metals are in great demand by the electrical and electronics industry, so waste electrical and eletronic equipment represents a significant source of secondary raw materials. Owing to low recycling rates and the concomitant supply risks associated with critical metals, the closure of the material cycles is highly relevant to the German economy. Losses of these metals occur from collection until their material recovery, along the entire disposal chain of waste electrical and electronic equipment. This paper develops planning criteria for the design of collection groups to achieve higher recovery amounts of such metals. The aim is to clarify what amounts of metals exist, both product-specific and on the market, how the dismantling of the products is constructed and how collection groups can be arranged with planning criteria oriented towards resource conservation. The analysis is a snapshot using the example of indium and selected products. A procedure is presented and findings identified which are transferable to various critical metals and to waste electrical and electronic equipment. The results show that grouping of products according to resource amounts and the dismantling effort enables forward-looking and resource-efficient planning of the treatment of every single collection group.
Shifting the resource base for chemical and energy production from fossil feedstocks to renewable raw materials is seen by many as one of the key strategies towards sustainable development. The utilization of biomass for the production of fuels and materials has been proposed as an alternative to the petroleum-based industry. Current research and policy initiatives focus mainly on the utilization of lignocellulose biomass, originating from agriculture and forestry, as second generation feedstocks for the production of biofuels and electricity. These activities act on the assumption that significant amounts of biomass for non-food purposes are available. However, given a certain productivity per area, the current massive growth in global biofuels demand may in the long term only be met through an expansion of global arable land at the expense of natural ecosystems and in direct competition with the food-sector. Although many studies have shown the potential of biofuels production to reduce both, greenhouse gas emissions and non-renewable energy consumption, these production routes are still linear processes which depend on significant amounts of agricultural or forestry production area. Cascading use, i.e. when biomass is used for material products first and the energy content is recovered at end-of-life, may provide a greater environmental benefit than primary use as fuel. Considering waste and production residues as alternative feedstocks could help to further reduce pressures on global arable land. This research focused on thermochemical and biochemical technologies capable of utilizing organic waste or forestry residuals for energy, chemical feedstock, and synthetic materials (polymers) generation. Routes towards synthetic materials allow a closer cycle of materials and can help to reduce dependence on either fossil or biobased raw materials. The system-wide environmental burdens of three different technologies, including (1) municipal solid waste (MSW) gasification followed by Fischer-Tropsch synthesis (FTS), (2) plasma gasification of construction and demolition (C&D) wood for syngas production with energy recovery, and (3) forest residuals use in a biorefinery for polyitaconic acid (PIA) production, were assessed using life-cycle assessment. The first two studies indicated that MSW gasification and subsequent ethylene and polyethylene production via FTS has lower environmental impacts than conventional landfilling. In the future, as societies may shift towards the use of renewable energy, power offset by conventional waste-to-energy systems would not be as significant and chemicals production routes may then become increasingly competitive (in terms of environmental burdens) also to waste incineration. While production cost of Fischer-Tropsch derived chemicals seems not yet competitive to fossil-based chemicals provision, future price increases in global oil prices as well as changes in waste tipping fees, and efficiency gains on site of the waste conversion systems, may alter the economics and allow carbon recycling routes to reach a price competitive to fossil-based production routes. The third study found that plasma gasification of C&D wood for energy recovery has roughly similar environmental impacts than conventional fossil-based power systems. However, process optimization with respect to coal co-gasified, coke used as gasifier bed material, and fuel oil co-combusted in the steam boiler, would allow to significantly lower the system-wide environmental burdens. The fourth study looked at PIA production from softwood hemicellulose in a stream integrated approach (with the partially macerated wood and lignin being used in other existing processes such as pulp & paper plants for conventional pulp and bioenergy production). The assessment indicated lower global warming potential, energy demand, and acidification, for the wood-based PIA polymer, when compared to corn-based PIA and fossil-based polyacrylic acid (PAA). However, water use associated with wood-derived PIA was found to be higher than for fossil-based PAA production and land occupation is highest for the wood-derived polymer. It is hoped that results of this dissertation will add to the current debate on sustainable waste and biomass utilization and to establish future supply chains for green and sustainable chemical products.
The availability of life cycle inventories is one of the biggest challenges for life cycle wide environmental assessment. There are several life cycle assessment (LCA) databases providing inventory data as well as resource and emission profiles of processes for impact assessment methods like ReCiPe or IMPACT 2002+. But the use of these LCA databases for input oriented environmental assessment is very limited as they cover only a part of all relevant input flows. The paper describes current challenges when calculating the input oriented Material Input per Service Unit (MIPS) indicators based on LCA inventory data from the Ecoinvent database. Propositions are made how to address these challenges. As a conclusion, further need of research to reach a full compatibility of LCA databases and the MIPS concept is pointed out.
Crowdsourcing as a method of transdisciplinary research : tapping the full potential of participants
(2014)
Within the scope of citizen science projects, crowdsourcing has already expanded into scientific application areas. In this, its scientific potential is only partly exhausted, however.
It will be shown that transdisciplinary research is made up in content and structural aspects in such a way that crowdsourcing can fully unfold as a research method through varied participation possibilities, reflective processes and use of contemporary technical possibilities. Furthermore, mutual learning, understanding and the dissemination of knowledge strongly profits from effects that even result automatically in this context.
The scientific application of crowdsourcing represented here makes high demands on project management, but it is expected to turn out as an effective research method precisely in the area of transdisciplinary research.
EXIOPOL (A New Environmental Accounting Framework Using Externality Data and Input–Output Tools for Policy Analysis) was a European Union (EU)-funded project creating a detailed, global, multiregional environmentally extended Supply and Use table (MR EE SUT) of 43 countries, 129 sectors, 80 resources, and 40 emissions. We sourced primary SUT and input–output tables from Eurostat and non-EU statistical offices. We harmonized and detailed them using auxiliary national accounts data and co-efficient matrices. Imports were allocated to countries of exports using United Nations Commodity Trade Statistics Database trade shares. Optimization procedures removed imbalances in these detailing and trade linking steps. Environmental extensions were added from various sources. We calculated the EU footprint of final consumption with resulting MR EE SUT. EU policies focus mainly on energy and carbon footprints. We show that the EU land, water, and material footprint abroad is much more relevant, and should be prioritized in the EU's environmental product and trade policies.
The European Waste Framework Directive has defined waste prevention as top of the waste hierarchy meaning nothing less than a fundamental change of the sociotechnical system of waste infrastructures with all its economic, legal, social and cultural elements. Based on an empirical analysis of more than 300 waste prevention measures this paper assesses which prevention effects can realistically be achieved by applying the measures described in the German waste prevention programme or in those of other EU member states. Taking into account waste streams like packaging, food waste, bulky waste and production waste the results show that waste generation is not an unavoidable evil but can be significantly reduced at current level of technology.
The current flow of carbon for the production, use, and waste management of polymer-based products is still mostly linear from the lithosphere to the atmosphere with rather low rates of material recycling. In view of a limited future supply of biomass, this article outlines the options to further develop carbon recycling (C-REC). The focus is on carbon dioxide (CO2) capture and use for synthesis of platform chemicals to produce polymers. CO2 may be captured from exhaust gases after combustion or fermentation of waste in order to establish a C-REC system within the technosphere. As a long-term option, an external C-REC system can be developed by capturing atmospheric CO2. A central role may be expected from renewable methane (or synthetic natural gas), which is increasingly being used for storage and transport of energy, but may also be used for renewable carbon supply for chemistry. The energy input for the C-REC processes can come from wind and solar systems, in particular, power for the production of hydrogen, which is combined with CO2 to produce various hydrocarbons. Most of the technological components for the system already exist, and, first modules for renewable fuel and polymer production systems are underway in Germany. This article outlines how the system may further develop over the medium to long term, from a piggy-back add-on flow system toward a self-carrying recycling system, which has the potential to provide the material and energy backbone of future societies. A critical bottleneck seems to be the capacity and costs of renewable energy supply, rather than the costs of carbon capture.
Global warming, the overall extraction of minerals and the expansion of cultivated land for biomass harvest are growing globally. These "Big Three" represent key environmental pressures which may lead to a continuous degradation of the living environment, if not controlled at levels with acceptable low risk. The situation is complex, because countries and regions consume products which require resources such as minerals and land in various parts of the world. Nevertheless, it is possible to measure the global resource use which is associated with the domestic consumption. In order to inform policies at the national and supranational level whether it may be necessary to adjust the incentive framework for industry and households, reference data are needed to compare the status quo of their countries with what may be deemed acceptable at a global level. This chapter outlines a rationale for the derivation of possible long-term targets for total material consumption of abiotic materials (TMCabiot) and global land use for crops (GLUcropland). The indicated targets are expressed in tentative per capita values which may serve as a first orientation and basis for further debate and research.
While strategic studies on natural resources usually focus on the criticality of certain single materials, our paper starts from the inter-linkages between and among resources (called "the resource nexus"). It examines the impact any food and water stress may have on extraction activities in fragile states and regions. According to our approach, conflicts are likely to increase and may escalate in a number of countries, many of which are of relevance for the global supply of strategic materials. Future criticality for European and other industries, thus, is more likely to result from particular regions surpassing their adaptive capacities, and not mainly from limited availability or bottlenecks in the supply chain. The paper first develops a heuristic model of drivers for stress in resource-rich regions. Applying this approach, our paper then develops a global three-layered map along the dimensions of (i) future regional food and water stress, (ii) fragility of countries, and (iii) resource-rich countries with relevant reserves of strategic materials. As a result our paper tentatively identifies 15 countries at high risk and some 30 other countries being at relevant risk of causing resource supply disruptions. The conclusions underline the need to analyse those global inter-linkages and institutional mechanisms for strategic futures studies at a regional scale. As this may go beyond the capacities of actors on commodity markets, our paper also draws conclusions towards the establishment of an international data hub on the global resource nexus and for futures research. The paper points to some of the long-term implications of these issues.
Improving material efficiency in the manufacturing industry is a sustainability imperative for companies due to economic and environmental advantages such as the reduction of material costs and resource use. Innovative solutions in terms of material efficiency measures are diverse and widespread. As a systematic assessment of efficiency approaches and their effects are likely to support dissemination and deployment, this paper aims to develop an approach that helps to classify material efficiency measures. The classification approach presents different dimensions and properties of material efficiency measures based on a literature analysis regarding existing classification approaches as well as on work that has been conducted for the Eco-Innovation Observatory. The classification has been designed as basis for an empirical impact assessment of material efficiency measures based on a data sample that stems from the German Material Efficiency Agency.
Based on the European Waste Framework Directive and the German Recycling Management Act of 01.06.2012 the objectives for a national waste prevention programme were defined. As main objective, according to art. 1 WFD, the "prevention or reduction of the disadvantageous impacts of waste generation and management on the human health and the environment" is recommended. Indicators for a quantitative and qualitative monitoring are derived for both, the individual measures as well as for a waste prevention programme.
Carbon recycling, in which organic waste is recycled into chemical feedstock for material production, may provide benefits in resource efficiency and a more cyclical economy - but may also create "trade-offs" in increased impacts elsewhere. We investigate the system-wide environmental burdens and cost associated with carbon recycling routes capable of converting municipal solid waste (MSW) by gasification and Fischer-Tropsch synthesis into ethylene. Results are compared to business-as-usual (BAU) cases in which ethylene is derived from fossil resources and waste is either landfilled with methane and energy recovery (BAU#1) or incinerated (BAU#2) with energy recovery. Monte Carlo and sensitivity analysis is used to assess uncertainties of the results. Results indicate that carbon recycling may lead to a reduction in cumulative energy demand (CED), total material requirement (TMR), and acidification, when compared to BAU#1. Global warming potential is found to be similar or slightly lower than BAU#1 and BAU#2. In comparison to BAU#2, carbon recycling results in higher CED, TMR, acidification, and smog potential, mainly as a result of larger (fossil-based) energy offsets from energy recovery. However, if a renewable power mix (envisioned for the future) is assumed to be offset, BAU#2 impacts may be similar or higher than carbon recycling routes. Production cost per kilogram (kg) MSW-derived ethylene range between US$1.85 and US$2.06 (Jan 2011 US$). This compares to US$1.17 per kg for fossil-based ethylene. Waste-derived ethylene breaks even with its fossil-based counterpart at a tipping fee of roughly US$42 per metric ton of waste feedstock.
Calculating MIPS 2.0
(2013)
The Wuppertal Institute developed, in the early 1990s, an input-oriented lifecycle-wide resource accounting method, the "Material Input per Service-Unit" concept (MIPS), today also referred to as "Material Footprint". The official handbook applicable to products, services, and processes describes a MS Excel-based sequential approach for calculating MIPS. Today's computing power, available to every researcher, and access to software and databases dedicated to lifecycle analysis make calculating MIPS using matrix inversion possible. This also opens up possibilities for enhancing MIPS-models programmatically: parameterizing the foreground and background systems, batch modeling for producing time series, and computational algorithms enhancing interpretation. The article provides (1) an overview of the methods and tools used for calculating MIPS from its origins to today, and (2) demonstrates some of the programmatically enhanced capabilities offered to MIPS-practitioners.
Emscher 3.0 : from grey to blue - or, how the blue sky over the Ruhr region fell into the Emscher
(2013)
The river Emscher is - similar to the river Ruhr - the symbol of one of the internationally most renowned industrial regions: the Ruhr area with its 5 million inhabitants and an important location of key industries such as steel, chemical and materials industry. The revitalisation of the Emscher over the last 20 years marks a new phase in the region's history and is an impressive example of ecological and socio-economic transformation affecting all aspects of life along the river. What can we learn from the Emscher conversion for upcoming tasks in other infrastructure fields?
Several studies in Germany aimed at the development of a sound database on existing waste prevention measures by public bodies at the local, regional and federal levels. These results are the starting point for the creation of a national prevention program, which has to be presented by all European Member States until the end of 2013 - due to the revised European Waste Framework Directive. Based on this empirical foundation, this paper draws conclusions with regard to drivers and barriers for eco-innovations in the field of waste prevention. The analysis shows that an optimized adaptation of information on waste prevention to the needs of specific target groups is still missing but could be a relevant driver. With regard to barriers the results of the study show that waste prevention is by no means always a win–win-situation. Institutional frameworks are missing to coordinate the different interests and for the exchange of experiences that could help to realize learning effects regarding innovation approaches.
This chapter addresses material leakage as a major problem of international open markets for used goods, in particular for used vehicles. It develops elements of an international metal covenant that should allow for a more sustainable management of global material flows in that area. The arguments in favour of such a proposal are as follows: Any regulation should actively seek for industry participation, taking advantage of business interest in supplying a sufficient amount of materials while lowering materials cost. It should also address public issues such as sustainability of recycling and waste. A first section analyses contracts as a tool to overcome knowledge problems that occur when many actors are involved. A second short section gives empirical evidence for material leakage in the case of used vehicles from Germany. A third section develops elements of an international metal covenant. A fourth section analyses potential impacts and discusses legal and institutional issues. Finally, some conclusions are drawn.
This article presents the accounts of China's Total Material Requirement (TMR) during 1995–2008, which were compiled under the guidelines of Eurostat (2009) and with the Hidden Flow (HF) coefficients developed by the Wuppertal Institute. Subsequently, comparisons with previous studies are conducted. Using decomposition, we finally examine the influential factors that have changed the TMR of China. The main findings are the following: (1) During 1995–2008 China's TMR increased from 32.7 Gt to 57.0 Gt. Domestic extraction dominated China’s TMR, but a continuous decrease of its shares can be observed. In terms of material types, excavation constituted the biggest component of China's TMR, and a shift from biomass to metallic minerals is apparent; (2) Compared with two previous studies on China's TMR, the amounts of TMR in this study are similar to the others, whereas the amounts of the used part of TMR (Direct Material Input, DMI) are quite different as a result of following different guidelines; (3) Compared with developed countries, China's TMR per capita was much lower, but a continuous increase of this indicator can be observed; (4) Factors of Affluence (A) and Material Intensity (T), respectively, contributed the most to the increase and decrease of TMR, but the overall decrease effect is limited.
The Low Carbon Future Cities (LCFC) project aims at facing a three dimensional challenge by developing an integrated city roadmap balancing: low carbon development, gains in resource efficiency and adaptation to climate change. The paper gives an overview of the first outcomes of the analysis of the status quo and assessment of the most likely developments regarding GHG emissions, climate impacts and resource use in Wuxi - the Chinese pilot city for the LCFC project. As a first step, a detailed emission inventory following the IPCC guidelines for Wuxi has been carried out. In a second step, the future development of energy demand and related CO2 emissions in 2050 were simulated in a current policy scenario (CPS). In parallel, selected aspects of material and water flows for the energy and the building sector were analyzed and modeled. In addition, recent and future climate impacts and vulnerability were investigated. Based on these findings, nine key sectors with high relevance to the three dimensions could be identified. Although Wuxi's government has started a path to implement a low carbon plan, the first results show that, for the shift towards a sustainable low carbon development, more ambitious steps need to be taken in order to overcome the challenges faced.
Defining the prevention of waste as top priority of the waste hierarchy - as confirmed by the revised Waste Framework Directive (WFD) - is much more than a simple amendment of ways to deal with waste, but means nothing less than a fundamental change of the socio-technical system of waste infrastructures and requires a transition from end-of-pipe technologies towards an integrated management of resources. The WFD therefore obligates member states to develop national waste prevention programs as a new policy instrument with the development of waste prevention indicators as one of the core elements. The article discusses the limitations of waste-based key figures and shows the need for more process-oriented indicators. As part of the development of national waste prevention programs such indicators reveal the relevance of different barriers that have to be overcome in order to make prevention an effective top priority in the waste hierarchy. With regard to path dependencies caused by sunk costs in end-of-pipe waste infrastructures the absolute amount of integrated environmental investments, as well as their share of the total waste-related investments, can be seen as indicators for the level of innovation activities aimed at waste prevention. Sector-specific indicators for the production phase could be used as benchmarks and to highlight differences in the need for policy interventions.
Leasing society : study
(2012)
Europe in transition : paving the way to a green economy through eco-innovation ; annual report 2012
(2013)
Conflict minerals
(2012)
This study aims to investigate whether, to what extent and how a transition toward integrated flood management has taken place in the Dongting Lake area at the middle Yangtze. Accordingly, we conducted a longitudinal research of its flood management (1949–2009). We developed an analytical framework linking regime components to two societal learning types (double and triple-loop learning) that are key to a regime transition. Our study shows that the transition toward integrated flood management has already started, but the whole regime transformation will still take time to complete, due to, for example, the not-yet-ready decision-making processes that shape the structure changes as well as the incompatibilities between what is on paper and real implementation. To understand how the regime transition took place, we investigated where and how triple-loop learning was initiated as well as how so-called "informal learning processes" has contributed to the transition of Dongting flood management.
To achieve an efficient use and allocation of limited water resources and thus resolve increasing water use conflicts due to fast rising societal water demands, in 2000, the Chinese government started a management strategy of 'Construction of a Water Saving Society (WSS)'. It is guided by the principle that socio-economic development should consider the carrying capacity of the ecosystem and focuses on institutional innovation, building on the water rights concept. This paper explores the innovation process during the transition towards WSS by investigating the development course of the innovation process during the transition towards WSS, and the adaptive capacity of the existing water management regime underlying the innovation process. Accordingly, an analysis framework consisting of three types of governance activities and factors determining a regime's adaptive capacity was developed, based on the theory of transition management and adaptive governance. The Tianjin and Zhangye WSS experiments were selected for a deep understanding of local innovations. It is revealed that co-evolution of all three types of governance activities that are claimed to be essential for transition has taken place. However, the current adaptive capacity of the regime still needs further enhancement to support the transition towards the desired WSS in China. Finally, some general insights are provided for policy innovations in other political economies.
For decades, the Chinese government has been searching for solutions to cope with the increasing imbalance between the supply and demand of water in the Yellow River Basin. This paper aims at a better understanding of the development of the water allocation regime in the Yellow River Basin between 1950 and 2009, introducing a fresh perspective based on the notion of "regime transition". Accordingly, we investigated 1) whether so-called "Windows of Opportunity for Transition (WOPTs)" emerged, triggering a transition, and whether WOPT(s) resulted in a stable transition towards the new regime; 2) how informal learning processes and epistemic communities have contributed to the regime change. We adapted Kingdon's "multiple stream model" and identified four WOPTs from the 1950s, analyzing the reconfiguration process of the regime after the onset of the transition. Our examples of two types of informal learning processes demonstrate their contribution to the creation of WOPTs and the reconfiguration of the regime. Furthermore, this study indicates, in a qualitative manner, how epistemic communities contribute to the knowledge base of the regime, and thus to its development. Finally, we have provided a general insight into the further development of the water allocation regime and highlighted potential avenues for further studies.
This chapter is an excerpt from a study commissioned by the European Parliament, which examines EU subsidies for agriculture, fisheries, transport, energy and regional development. Based on proven methodologies for the identification and assessment of environmentally harmful subsidies, the study assesses the sustainability level of the sectoral policies and makes recommendations for a reform that would contribute to the alignment of the EU budget towards a more sustainable growth. The following sections provide the main findings of one of the largest fields of expenditure within the EU budget, the structural and cohesion policy.
In the past few decades, geochemically scarce metals have
become increasingly relevant for emerging technologies in
domains such as energy supply and storage, information and
communication, lighting or transportation, which are regarded as
cornerstones in the transition towards a sustainable post-fossil
society. Accordingly, the supply risks of scarce metals and possible
interventions towards their more sustainable use have been
subject to an intense debate in recent studies. In this article, we
integrate proposed intervention options into a generic life cycle
framework, taking into account issues related to knowledge
provision and to the institutional setting. As a result, we obtain
a landscape of intervention fields that will have to be further
specified to more specific intervention profiles for scarce metals
or metals families. The envisioned profiles are expected to have
the potential to reduce action contingency and to contribute to
meeting the sustainability claims often associated with emerging
technol ogies.
Multinational mining companies operating in Latin America increasingly publish sustainability reports which outline their contributions to sustainable development. Companies argue that reports help communities better understand the importance of the benefits created by mining. However, we argue that sustainabilityreporting can only play a role in improving a company's performance and reputation if the quality of the reported data is good enough to answer community-raised contentious issues and if such are tackled through a stakeholder engagement process which includes "anti-mining" groups. The paper examines a miningconflict in Argentina's Bajo de la Alumbrera open pit mine. The assessment is based on a content analysis of Alumbrera's Sustainability Report (SR), primarily from 2009, complemented with insights from the 2010 and 2011 reports. The study reveals that environmental and economic indicators are the most contentious and least reported. The reports examined only briefly acknowledge these issues, and fail to detail the procedures followed to identify and engage stakeholders.
Increasing urbanisation and climate change belong to the greatest challenges of the 21st century. A high share of global greenhouse gas emissions are estimated to originate in urban areas (40 % to 78 % according to UN Habitat 2010). Therefore, low carbon city strategies and concepts implicate large greenhouse gas (GHG) mitigation potentials. At the same time, with high population and infrastructure densities as well as concentrated economic activities, cities are particularly vulnerable to the impacts of climate change and need to adapt. Scarce natural resources further constrain the leeway for long-term, sustainable urban development. The Low Carbon Future Cities (LCFC) project aims at tapping this three-dimensional challenge and will develop an integrated strategy / roadmap, balancing low carbon development, gains in resource efficiency and adaptation to climate change. The study focuses on two pilot regions - one in China (Wuxi) and one in Germany (Düsseldorf+) - and is conducted by a German-Chinese research team supported by the German Stiftung Mercator. The paper gives an overview of first outcomes of the analysis of the status quo and assessment of the most likely developments regarding GHG emissions, climate impacts and resource use in Wuxi. The project developed an emission inventory for Wuxi to identify key sectors for further analysis and low carbon scenarios. The future development of energy demand and related CO2 emissions in 2030 were simulated in the current policy scenario (CPS), using five different sub-models. Selected aspects of Wuxi's current material and water flows were analysed and modelled for energy transformation and the building sector. Current and future climate impacts and vulnerability were investigated. Recent climatic changes and resulting damages were analysed, expected changes in temperature and precipitation in the coming four decades were projected using ensembles of three General Circulation Models. Although Wuxi's government started a path to implement a low carbon plan, the first results show that more ambitious efforts are needed to overcome the challenges faced.
The challenges of resource efficiency and appropriate strategies : a special issue in "SAPIENS"
(2011)
Natural resources are back on the agenda. After the rise of new economic powers such as China, India, and Brazil, global competition has perceptibly increased strategic concerns as regards high commodity prices and possible supply shortages. Germany, the EU, the United States, and many others have formulated raw material strategies that put concern over access and supply at center stage - but the environmental and the socio-political dimensions are widely neglected in these strategies. This paper underlines a new dimension of international relations and pleads for new approaches, called international resource politics, which can be used for ongoing debates concerning green economy and transition strategies.
Global trade is increasingly being challenged by observations of growing burden shifting, in particular of environmental problems. This paper presents the first worldwide calculations of shifted burden based on material flow indicators, in particular direct and indirect physical trade balances. This study covers the period between 1962 and 2005 and includes between 82 and 173 countries per year. The results show that indirect trade flow volumes have increased to around 41 billion tonnes in 2005. The traded resources with the highest share of associated indirect flows are iron, hard coal, copper, tin and increasingly palm oil. Regarding the burden balance between regions, Europe is the biggest shifter whereas Australia and Latin America are the largest takers of environmental burden due to resource extraction. To evaluate the findings from a global perspective, the results are analysed in terms of resource flow induced environmental pressure related to a country's land area in terms of total and per capita area. Resource endowment and population density seem to be more relevant in determining the physical trade balance, including indirect flows, than income level.