Refine
Year of Publication
Document Type
- Report (72)
- Peer-Reviewed Article (71)
- Part of a Book (47)
- Conference Object (25)
- Working Paper (20)
- Book (8)
- Contribution to Periodical (8)
- Doctoral Thesis (3)
- Periodical Part (3)
Language
- English (257) (remove)
Division
- Stoffströme und Ressourcenmanagement (257) (remove)
This paper focuses on market incentives by the introduction of a construction minerals tax as an example of a resource tax. Currently, various European countries levy taxes or duties on primary construction materials, but a harmonisation of the taxation is not planned. Provided the tax rate has a perceptible price effect, the taxation of a resource can foster a demand management or the reduction of the raw material consumption and the governance of side and secondary effects. A construction minerals tax can target the stimulation of demand for secondary raw materials and recycled products, and - because the reuse of construction and demolition waste has technical limits - a stronger emphasis on the conservation of buildings and infrastructures. This has positive effects on the environment and the innovation efforts and it helps to internalise externalities. Germany, used as a case study in this paper, does not raise any taxes on other raw materials than energy sources at the federal level. For this reason, potential impacts of the introduction of a construction minerals tax will be explored and the results of a simulation will be provided.
Northrhine-Westphalia (NRW) is the largest land of the Federal Republic of Germany. Until the 1970ies the Ruhr-area with a population of about 12 million people and a strong coal, steel and chemical industry had been plagued with severe pollution. In the 1970ies environmental protection had emerged on the international and national policy agendas. The federal and regional government launched massive legislative and economic public interventions for cleaning-up rivers, soils and air. As a result, a highly competitive eco-industry emerged. The article outlines main features of ecoindustries, the structural change of the Ruhr area and regional economic cluster policies in support of eco-industries in NRW. It draws conclusions for eco-industry policy developing from end-of-pipe towards integrated preventive approaches.
Concerns over climate change and the security of industrial feedstock supplies have been opening a growing market for biobased materials. This development, however, also presents a challenge to scientists, policy makers, and industry because the production of biobased materials requires land and is typically associated with adverse environmental effects. This article addresses the environmental impacts of biobased materials in a meta-analysis of 44 life cycle assessment (LCA) studies. The reviewed literature suggests that one metric ton (t) of biobased materials saves, relative to conventional materials, 55 ± 34 gigajoules of primary energy and 3 ± 1 t carbon dioxide equivalents of greenhouse gases. However, biobased materials may increase eutrophication by 5 ± 7 kilograms (kg) phosphate equivalents/t and stratospheric ozone depletion by 1.9 ± 1.8 kg nitrous oxide equivalents/t. Our findings are inconclusive with regard to acidification (savings of 2 ± 20 kg sulfur dioxide equivalents/t) and photochemical ozone formation (savings of 0.3 ± 2.4 kg ethene equivalents/t). The variability in the results of life cycle assessment studies highlights the difficulties in drawing general conclusions. Still, common to most biobased materials are impacts caused by the application of fertilizers and pesticides during industrial biomass cultivation. Additional land use impacts, such as the potential loss of biodiversity, soil carbon depletion, soil erosion, deforestation, as well as greenhouse gas emissions from indirect land use change are not quantified in this review. Clearly these impacts should be considered when evaluating the environmental performance of biobased materials.
This paper addresses future perspectives for the management of resources on an international level. Failures of international open markets result in significant material leakage. Here, taking the example of material used vehicles, we develop elements of an international metal covenant that should allow for a more sustainable management of global material flows in that area. Our proposal is based on two principles: any regulation should actively seek industry participation, taking advantage of business interest in supplying a sufficient quantity of materials while lowering materials costs; and it should also address public issues such as sustainability of recycling and waste. In this paper we first analyse contracts as a tool for bridging gaps in knowledge when multiple actors are involved. We then give empirical evidence for material leakage in the case of used vehicles from Germany, before outlining the elements of a proposed international metals covenant. Finally, we analyse potential impacts and discuss legal and institutional issues.
The exploitation of coltan in Central Africa can be considered a case of conflict minerals due to its nature. Many international organizations and bodies, national governments and private sector organizations seek to address this conflict, in particular via transparency, certification and accountability along the material supply chain. This paper analyses the international trade dimension of coltan and gives evidence on the dimension of illicit trade of coltan. The authors start from the hypothesis that illicit trade of coltan sooner or later will enter the market and will be reflected in the statistics. The paper is structured in the following manner: first, a short section gives a profile of coltan production and markets; second, an overview of the mining situation in the Democratic Republic of Congo (DRC) and related actors. The third section addresses mechanisms, actors and measurement issues involved in the international trade of coltan. The final part draws lessons for certification and conflict analysis and offers some guidance for future research.
The paper identifies two main possible gateways to trace illegal trade in coltan: the neighboring countries, especially Rwanda, and the importing countries for downstream production, in particular China. Our estimation is that the value of such illicit trade comes close to $ 27 million annually (2009), roughly one-fifth of the world market volume for tantalum production. With regard to any certification the paper concludes that this will become challenging for business and policy: (a) Central Africa currently is the largest supplier of coltan on the world market, many actors profit from the current situation and possess abilities to hide responsibility; (b) China will need to accept more responsibility, a first step would be the acceptance of the OECD guidelines on due diligence; (c) better regional governance in Central Africa comprises of resource taxation, a resource fund and fiscal coordination. An international task force may provide more robust data, however more research will also be needed.
The green new deal and ecological industry policy : greening of manufacturing and energy generation
(2011)
Towards a set of indicators on sustainable consumption and production (SCP) for EEA reporting
(2010)
Resource-efficient construction : the role of eco-innovation for the construction sector in Europe
(2011)
Human societies face a threatening future of resource scarcity and environmental damages. This book addresses the challenge of turning these risks into opportunities and policies. It is a collection of high level contributions from experts of sustainable growth and sustainable resource management. Focussing on economics, sustainability, technology and policy, the book highlights system innovation, leapfrogging strategies of emerging economies, possible rebound effects and international market development. It puts natural resources centre stage and will make an important contribution to achieving the goal of a 21st century Green Economy.
Resource efficiency in Europe : policies and approaches in 31 EEA member and cooperating countries
(2011)
Development of scientific and technical foundations for a national waste prevention programme
(2010)
In a new waste hierarchy the amended EU Waste Framework Directive (WFD) (2008/98/EG) confirmed the prevention of waste as a priority measure to protect the environment with regard to the production and handling of waste. Amongst others the Member States are requested to promote waste prevention. According to article 29 par. 1 WFD the prevention measures have to be planned in terms of waste prevention programmes to be created by the Member States until December 12th 2013. These prevention programmes are to describe existing waste prevention measures and set waste prevention goals. The progress is to be monitored and assessed by targeting appropriate, specific qualitative or quantitative benchmarks for adopted waste prevention measures. The programmes may be included in waste management plans or other environmental programmes. By the objectives and measures of prevention programmes the environmental impacts associated with generation of waste shall be decoupled from economic growth.
Towards a resource policy : unleashing productivity dynamics and balancing international distortions
(2012)
The paper outlines guidelines and pillars of a resource policy. Two reasons favour the formulation of such policy: a demand to increase sluggish resource productivity growth as well as environmental damages occurring along material flows at an international scale. Thus, it is both the innovation and environmental perspective that legitimate policies. The paper surveys recent empirical trends. Referring to research on innovation and transition management, it develops guidelines for a resource policy, namely, market order, provision function, learning processes, market development, and orientation. It furthermore describes four instruments as potential pillars of a future policy mix: a tax on construction minerals, an ecologically differentiated VAT tax, and an international covenant for metals and an international convention for sustainable resource management. The paper finally reflects these guidelines and pillars against weaknesses and ongoing discussions of climate policy. It concludes that despite all uncertainties and complexities, a well-designed resource policy is on the verge of becoming essential for unleashing eco-innovation dynamics.
Managing solid waste is one of the biggest challenges in urban areas around the world. Technologically advanced economies generate vast amounts of organic waste materials, many of which are disposed to landfills. In the future, efficient use of carbon containing waste and all other waste materials has to be increased to reduce the need for virgin raw materials acquisition, including biomass, and reduce carbon being emitted to the atmosphere therefore mitigating climate change. At end-of-life, carbon-containing waste should not only be treated for energy recovery (e.g. via incineration) but technologies should be applied to recycle the carbon for use as material feedstocks. Thermochemical and biochemical conversion technologies offer the option to utilize organic waste for the production of chemical feedstock and subsequent polymers. The routes towards synthetic materials allow a more closed cycle of materials and can help to reduce dependence on either fossil or biobased raw materials. This chapter summarizes carbon-recycling routes available and investigates how in the long-term they could be applied to enhance waste management in both industrial countries as well as developing and emerging economies. We conclude with a case study looking at the system-wide global warming potential (GWP) and cumulative energy demand (CED) of producing high-density polyethylene (HDPE) from organic waste feedstock via gasification followed by Fischer–Tropsch synthesis (FTS). Results of the analysis indicate that the use of organic waste feedstock is beneficial if greenhouse gas (GHG) emissions associated with landfill diversion are considered.
Fossil independence and substantial reductions in CO2 emissions seem to be possible with 2nd generation biofuels. New technologies allow a full carbon-to-fuel conversion of non-edible plant parts such as straw or wood, and the cultivation of algae or salt-resistant plants uncouples bioenergy from food production. Nevertheless, impacts on biodiversity, global land and water use are widely unclear and their competitiveness with 1st generation biofuels and electric mobility is an open question. An interdisciplinary team of Empa, University of Zurich and the Wuppertal Institute of Climate, Environment and Energy evaluated the most sustainable production techniques and assessed their potential for our future mobility.
Consumption of natural resources should not exceed sustainable levels. The increasing use of biofuels and to some extent biomaterials, on top of rising food and feed demands, is causing countries to use a growing amount of global land, which may lead to land use conflicts and the expansion of cropland and intensive cultivation at the expense of natural ecosystems. Selective product certification cannot control the land use change triggered by growing overall biomass consumption. We propose a comprehensive approach to account for the global land use of countries for their domestic consumption, and assess this level with regard to globally acceptable levels of resource use, based on the concept of safe operating space. It is shown that the European Union currently uses one-third more cropland than globally available on a per capita basis and that with constant consumption levels it would exceed its fair share of acceptable resource use in 2030. As the use of global forests to meet renewable energy targets is becoming a concern, an approach to account for sustainable levels of timber flows is also proposed, based on the use of net annual increment, exemplified with preliminary data for Switzerland. Altogether, our approach would integrate the concept of sustainable consumption into national resource management plans; offering a conceptual basis and concrete reference values for informed policy making and urging countries to monitor and adjust their levels of resource consumption in a comprehensive way, respectful of the limits of sustainable supply.
As illustrated by the case studies of end-of-life vehicles and waste electric and electronic equipment, the approach of an extended producer responsibility is undermined by the exports of used and waste products. This fact causes severe deficits regarding circular flows, especially of critical raw materials such as platinum group metals. With regard to global recycling there seems to be a responsibility gap which leads somehow to open ends of waste flows and a loss or down-cycling of potential secondary resources. Existing product-orientated extended producer responsibility (EPR) approaches with mass-based recycling quotas do not create adequate incentives to supply waste materials containing precious metals to a high-quality recycling and should be amended by aspects of a material stewardship. The paper analyses incentive effects on EPR for the mentioned product groups and metals, resulting from existing regulations in Germany. It develops a proposal for an international covenant on metal recycling as a policy instrument for a governance-oriented framework to initiate systemic innovations along the complete value chain taking into account product group- and resource group-specific aspects on different spatial levels. It aims at the effective implementation of a central idea of EPR, the transition of a waste regime still focusing on safe disposal towards a sustainable management of resources for the complete lifecycle of products.
This contribution presents the state of the art of economy-wide material flow accounting. Starting from a brief recollection of the intellectual and policy history of this approach, we outline system definition, key methodological assumptions, and derived indicators. The next section makes an effort to establish data reliability and uncertainty for a number of existing multinational (European and global) material flow accounting (MFA) data compilations and discusses sources of inconsistencies and variations for some indicators and trends. The results show that the methodology has reached a certain maturity: Coefficients of variation between databases lie in the range of 10% to 20%, and correlations between databases across countries amount to an average R2 of 0.95. After discussing some of the research frontiers for further methodological development, we conclude that the material flow accounting framework and the data generated have reached a maturity that warrants material flow indicators to complement traditional economic and demographic information in providing a sound basis for discussing national and international policies for sustainable resource use.
During the last century, the consumption of materials for human needs increased by several orders of magnitude, even for non-renewable materials such as metals. Some data on annual consumption (input) and recycling/waste (output) can often be found in the federal statistics, but a clear picture of the main flows is missing. A dynamic material flow model is developed for the example of copper in Switzerland in order to simulate the relevant copper flows and stocks over the last 150 years. The model is calibrated using data from statistical and published sources as well as from interviews and measurements. A simulation of the current state (2000) is compared with data from other studies. The results show that Swiss consumption and losses are both high, at a level of about 8 and 2 kg/(cap year), respectively, or about three times higher than the world average. The model gives an understanding of the flows and stocks and their interdependencies as a function of time. This is crucial for materials whose consumption dynamics are characterised by long lifetimes and hence for relating the current output to the input of the whole past. The model allows a comprehensive discussion of possible measures to reduce resource use and losses to the environment. While increasing the recycling reduces losses to landfill, only copper substitution can reduce the different losses to the environment, although with a time delay of the order of a lifetime.
This paper analyses drivers for resource use and material productivity acrosscountries. This is not only relevant in light of soaring raw material prices but also because EU policies, such as the "Thematic Strategy on the Sustainable Use of Natural Resources" (COM [2005] 670), the EU Raw Materials Initiative (COM [2008] 699) and various similar policies internationally, seek to better manage materials along their life-cycle and across economies. In order to better understand the system dynamics of material use, our paper applies methodologies of material flow analysis and regression analysis to identify the major drivers for resource use and decoupling from GDP. Drivers are understood as those factors that exert influence on human activities to use resources. A panel data set is taken for the European Union for the years 1980–2000 (EU-15) and 1992–2000 (EU-25). The main drivers of resource use were found to be energy efficiency, new dwellings and roads construction activities. Shortcomings of the methodology are also discussed.
Economy-wide material flows
(2010)
Air emissions accounts
(2010)
This article addresses informational barriers to energy efficiency. It is a widely acknowledged result that an energy efficiency gap exists implying that the level of energy efficiency is at an inefficiently low level. Several barriers to energy efficiency create this gap and the presence of asymmetric information is likely to be one such barrier. The article finds that problems of moral hazard and adverse selection indeed can help explain the seemingly low levels of energy efficiency. The theory reveals two implications to policies on energy efficiency. First, the development of measures to enable contractual parties to base remuneration on energy performance must be enhanced, and second, the information on technologies and the education of consumers and installers on energy efficiency must be increased. Finally, it is found that the preferred EU policy instrument on energy efficiency, so far, seems to be the use of minimum requirements. Less used in EU legislation is the use of measuring and verification as well as the use of certifications. Therefore, it is concluded that the EU should consider an increased use of these instruments.
Overviewing the European carbon (C), greenhouse gas (GHG), and non-GHG fluxes, gross primary productivity (GPP) is about 9.3 Pg yr-1, and fossil fuel imports are 1.6 Pg yr-1. GPP is about 1.25% of solar radiation, containing about 360 × 1018 J energy - five times the energy content of annual fossil fuel use. Net primary production (NPP) is 50%, terrestrial net biome productivity, NBP, 3%, and the net GHG balance, NGB, 0.3% of GPP. Human harvest uses 20% of NPP or 10% of GPP, or alternatively 1‰ of solar radiation after accounting for the inherent cost of agriculture and forestry, for production of pesticides and fertilizer, the return of organic fertilizer, and for the C equivalent cost of GHG emissions. C equivalents are defined on a global warming potential with a 100-year time horizon. The equivalent of about 2.4% of the mineral fertilizer input is emitted as N2O. Agricultural emissions to the atmosphere are about 40% of total methane, 60% of total NO-N, 70% of total N2O-N, and 95% of total NH3-N emissions of Europe. European soils are a net C sink (114 Tg yr−1), but considering the emissions of GHGs, soils are a source of about 26 Tg CO2 C-equivalent yr-1. Forest, grassland and sediment C sinks are offset by GHG emissions from croplands, peatlands and inland waters. Non-GHGs (NH3, NOx) interact significantly with the GHG and the C cycle through ammonium nitrate aerosols and dry deposition. Wet deposition of nitrogen (N) supports about 50% of forest timber growth. Land use change is regionally important. The absolute flux values total about 50 Tg C yr-1. Nevertheless, for the European trace-gas balance, land-use intensity is more important than land-use change. This study shows that emissions of GHGs and non-GHGs significantly distort the C cycle and eliminate apparent C sinks.
This paper undertakes a step to explaining the international economics of resource productivity. It argues that natural resources are back on the agenda for four reasons: the demand on world markets continues to increase, the environmental constraints to using resources are relevant throughout their whole life cycle, the access to critical metals could become a barrier to the low carbon economy, and uneven patterns of use will probably become a source of resource conflicts. Thus, the issue is also of relevance for the transition to a low carbon economy. "Material Flow Analysis" is introduced as a tool to measure the use of natural resources within economies and internationally; such measurement methodology now is being harmonized under OECD auspices. For these reasons, the paper argues that resource productivity - that is the efficiency of using natural resources to produce goods and services in the economy - will become one of the key determinants of economic success and human well-being. An empirical chapter gives evidence on time series of resource productivity increases across a number of economies. Introducing the notion of "material flow innovation", the paper also discusses the innovation dynamics and issues of competitiveness. However, as the paper concludes, market barriers make a case for effective resource policies that should provide incentives for knowledge generation and get the prices right.
The papers for this special issue were originally contributed to the 2nd International Wuppertal Colloquium on "Sustainable Growth, Resource Productivity and Sustainable Industrial Policy - Recent Findings, new Approaches for Strategies and Policies" that was held from 10 to 12 September 2009 in Wuppertal, Germany. The intensive discussion during the Colloqium and the subsequent rigorous review process have helped to facilitate this process - we wish to thank all participants and contributers, as well as Sevan Hambarsoomian and Deniz Erdem for administrative support.
The physical dimension of international trade. Part 1: Direct global flows between 1962 and 2005
(2010)
The physical dimension of international trade is attaining increased importance. This article describes a method to calculate complete physical trade flows for all countries which report their trade to the UN. The method is based on the UN Comtrade database and it was used to calculate world-wide physical trade flows for all reporting countries in nine selected years between 1962 and 2005. The results show increasing global trade with global direct material trade flows reaching about 10 billion tonnes in 2005, corresponding to a physical trade volume of about 20 billion tonnes (adding both total imports and total exports). The share from European countries is declining, mainly in favour of Asian countries. The dominant traded commodity in physical units was fossil fuels, mainly oil. Physical trade balances were used to identify the dominant resource suppliers and demanders. Australia was the principal resource supplier over the period with a diverse material export structure. It was followed by mainly oil-exporting countries with varying volumes. As regards to regions, Latin America, south-east Asian islands and central Asia were big resource exporters, mostly with increasing absolute amounts of net exports. The largest net importers were Japan, the United States and single European countries. Emerging countries like the "Asian Tigers" with major industrial productive sectors are growing net importers, some of them to an even higher degree than European countries. Altogether, with the major exception of Australia and Canada, industrialized countries are net importers and developing countries and transition countries are net exporters, but there are important differences within these groups.
Comparative analysis of environmental impacts of maize-biogas and photovoltaics on a land use basis
(2010)
This study aims to stimulate the discussion on how to optimize a sustainable energy mix from an environmental perspective and how to apply existing renewable energy sources in the most efficient way. Ground-mounted photovoltaics (PV) and the maize-biogas-electricity route are compared with regard to their potential to mitigate environmental pressure, assuming that a given agricultural area is available for energy production. Existing life cycle assessment (LCA) studies are taken as abasis to analyse environmental impacts of those technologies in relation to conventional technology for power and heat generation. The life-cycle-wide mitigation potential per area used is calculated for the impact categories non-renewable energy input, green house gas (GHG) emissions, acidification and eutrophication. The environmental performance of each system depends on the scenario that is assumed for end energy use (electricity and heat supply have been contemplated). In all scenarios under consideration, PV turns out to be superior to biogas in almost all studied impact categories. Even when maize is used for electricity production in connection with very efficient heat usage, and reduced PV performance is assumed to account for intermittence, PV can still mitigate about four times the amount of green house gas emissions and non-renewable energy input compared to maize-biogas. Soil erosion, which can be entirely avoided with PV, exceeds soil renewal rates roughly 20-fold on maize fields. Regarding the overall Eco-indicator 99 (H) score under most favourable assumptions for the maize–biogas route, PV has still a more than 100% higher potential to mitigate environmental burden. At present, the key advantages of biogas are its price and its availability without intermittence. In the long run, and with respect to more efficient land use, biogas might preferably be produced from organic waste or manure, whereas PV should be integrated into buildings and infrastructures.
Economic performance of a country is generally being measured through GDP (Gross Domestic Product), a variable that has also become the de facto universal metric for "standards of living". However, GDP does not properly account for social and environmental costs and benefits. It is also difficult to achieve sustainable decision-making aiming at sustainable progress and well-being if welfare is being considered from a purely financial point of view. The study highlights the benefits and some of the shortcomings of GDP. It serves as a helpful and practicable instrument for monetary and fiscal policies. The real problem presumably is that GDP growth is too often confused with (sustainable) welfare growth in people's minds. While there certainly is a correlation between the two, this study shows that this is a highly conditional correlation, void of substantial causality for GDP levels observable in the European Union. In order to be able to assess people's well-being and general sustainable development in the sense of sustainability, an alternative instrument going beyond GDP is necessary. Using so called SWOT analyses, several alternative progress indicators have been assessed in the context of this study. On the one hand it was analysed how far ecological and social factors can be integrated in the GDP measurements. Thereby difficulties arose then trying to monetise these factors. As a further possibility indicators were analysed which are to replace GDP as a whole. The category supplementing GDP seems to be the most realistic and acceptable option for going beyond GDP. Within this approach, GDP is being complemented with additional environmental and/or social information. In order to make this kind of solution feasible the study claims the establishment of an overarching and transparent indicator system for improving economic decision-making in support of sustainable development.
Life Cycle Assessment (LCA) has matured over the past decades and become part of the broader field of sustainability assessment. To strengthen LCA as a tool and eventually increase its usefulness for sustainability decision-making, it is argued that there is a need to expand the ISO LCA framework by integration and connection with other concepts and methods. This paper explores the potential options for deepening and broadening the LCA methodologies beyond the current ISO framework for improved sustainability analysis. By investigating several environmental, economic and social assessment methods, the paper suggests some options for incorporating (parts of) other methods or combining with other methods for broadening and deepening the LCA.
This paper presents the strategy for a large EU-funded Integrated Project: EXIOPOL ("A New Environmental Accounting Framework Using Externality Data and Input-Output Tools for Policy Analysis"), with special attention for its part in environmentally extended (EE) input-output (IO) analysis. The project has three principal objectives: (a) to synthesize and further develop estimates of the external costs of key environmental impacts for Europe; (b) to develop an EE IO framework for the EU-27 in aglobal context, including as many of these estimates as possible, to allow for the estimation of environmental impacts (expressed as LCA themes, material requirement indicators, ecological footprints or external costs) of the activities of different economic sectors, final consumption activities and resource consumption; (c) to apply the results of the work to external costs and EE I-O for illustrative policy questions.
This paper reviews the current EU policy framework in view of its impact on hydrogen and fuel cell development. It screens EU energy policies, EU regulatory policies and EU spending policies. Key questions addressed are as follows: to what extent is the current policy framework conducive to hydrogen and fuel cell development? What barriers and inconsistencies can be identified? How can policies potentially promote hydrogen and fuel cells in Europe, taking into account the complex evolution of such a potentially disruptive technology? How should the EU policy framework be reformed in view of a strengthened and more coherent approach towards full deployment, taking into account recent technology-support activities? This paper concludes that the current EU policy framework does not hinder hydrogen development. Yet it does not constitute a strong push factor either. EU energy policies have the strongest impact on hydrogen and fuel cell development even though their potential is still underexploited. Regulatory policies have a weak but positive impact on hydrogen. EU spending policies show some inconsistencies. However, the large-scale market development of hydrogen and fuel cells will require a new policy approach which comprises technology-specific support as well as a supportive policy framework with a special regional dimension.
The paper aims to shed light on the methodological challenges of GHG monitoring at local level and to give an overview on current practices. Questions addressed are as follows: How do the methodologies which underlie different GHG inventory tools differ? What are the critical variables explaining differences between inventories? Can different GHG inventory tools be compatible - and/or interoperable - and under which conditions? The first section discusses methodological challenges related to the formation of local GHG inventories. Rather than giving a comprehensive overview on methodological problems, this section mainly highlights some of the central methodological challenges posed by local GHG inventories. This overview identifies critical variables and clarifies concepts that are necessary for the understanding of the subsequent analysis. In section two, some of the most advanced GHG inventory tools are analysed and the most important differences between these tools are highlighted. The paper concludes that the methodologies are not consistent. Local GHG inventories can thus hardly be compared. The paper gives research and policy recommendations towards greater comparability and sketches the requirements of an international protocol on urban GHG inventories.
The study "A Green New Deal for Europe" consists of two basic elements: Firstly it aims to cope with the economic crisis through intensive measures in order to systematically stimulate the eco-industries, to create jobs and to boost economic recovery. Secondly it aims at establishing the foundation for a green modernisation of the European economy. The study examines existing EU strategies policies and programs concerning their suitability to implement the Green New Deal. It proposes exemplary measures in the field of energy, mobility and resource use. The study has been compiled by the Wuppertal Institute on behalf of the Greens/European Free Alliance (EFA) Group in the European Parliament.
The global land area required to meet the German consumption of agricultural products for food and non-food use was quantified, and the related greenhouse gas (GHG) emissions, particularly those induced by land-use changes in tropical countries, were estimated. Two comprehensive business-as-usual scenarios describe the development corridor of biomass for non-food use in terms of energetic and non-energetic purposes. In terms of land use, Germany was already a net importer of agricultural land in 2004, and the net additional land required by 2030 is estimated to comprise 2.5–3.4 Mha. This is mainly due to biofuel demand driven by current policy targets. Meeting the required biodiesel import demand would result in an additional GWP of 23–37 Tg of CO2 equivalents through direct and indirect land-use changes. Alternative scenario elements outline the potential options for reducing Germany's land requirement, which reflect future global per capita availability.
Sustainable management of natural resources is a crucial element for a sustainable development, but also a precondition for economic growth. The book analyses raw materials supply and resource use in a global context. The contributions present state-of-the art results and perspectives on the availability of resources. They discuss factors such as demand from emerging and other countries as well as critical shortage of some materials together with the resulting consequences for economies. It also gives new views and perspectives on the sustainable growth in ermerging economies and examines the possibilities and experiences concerning the decoupling of resource use from economic growth. Moreover, it offers cross-country comparisons with emphasis on emerging countries. A key focus is placed on China regarding its domestic energy, climate and resource policy but also its developing foreign policy in Africa.
On the one hand, biofuels may provide environmental and social benefits, for instance, when local communities in developing countries are supplied with power and process energy from oil producing plants, in particular when they are grown on land which is not suited for food production. On the other hand, the ongoing expansion of large scale energy farming for transport biofuels can lead to various environmental and social problems. Corn production for ethanol (additive to petrol) for instance resulted in nutrient pollution of the Mississippi basin and the Gulf of Mexico. The growing demand of transport biofuels in Europe can only be met by increasing imports. This contributes to the conversion of grasslands, savannahs and forests in the tropics, losses of biodiversity and additional green house gas emissions. Even if the use of biomass for other purposes, for instance, the combined production of electricity and heat usually provides a better greenhouse gas balance than transport biofuels, energy cropping remains problematic for various reasons. Whereas, when biomass is used for material purposes first, and the energy is recovered from the subsequent waste, a multiple dividend can be gained. The authors address a number of measures for improvement. They also recommend that in view of the complex circumstances of biofuel production and application, current policy mandates and targets for biofuels should be reconsidered. Biomass policies need to be integrated into a broader perspective of sustainable resource management.
Sustainable Resource Management is the result of longlasting exhaustive research by the Wuppertal Institute. Looking at material flows, industrial and societal metabolism and their implications for the economy, this new book provides radical perspectives on how the global economy should use natural resources in intelligent ways that maximise well-being without destroying lifesupporting ecosystems. It presents a vision of the future and the fundamental elements necessary for the sustainable management of the Earth's resources. It argues that the need to manage the use of our natural resources at a sustainable level can be shaped into a great opportunity for innovation and for new institutions to govern change.
A model of the use of the platinum group metals (PGMs) platinum, palladium, and rhodium in Europe has been developed and combined with a model of the environmental pressures related to PGM production. Compared to the base case presented in Part I of this pair of articles, potential changes in PGM production and use are quantified with regard to cumulative and yearly environmental impacts and PGM resource use, for the period 2005–2020. Reducing sulfur dioxide (SO2) emissions of PGM producer Norilsk Nickel could cut the cumulative SO2 emissions associated with the use of PGMs in Europe by 35%. Cleaner electricity generation in South Africa could reduce cumulative SO2 emissions by another 9%. Increasing the recycling rate of end-of-life catalytic converters to 70% in 2020 could save 15% of the cumulative primary PGM input into car catalysts and 10% of the SO2 emissions associated with PGM production. In 2020, PGM requirements and SO2 emissions would be, respectively, 40% and 22% lower than the base case. Substituting palladium for part of the platinum in diesel catalysts, coupled with a probable palladium price increase, could imply 15% more cumulative SO2 emissions if recycling rates do not increase. A future large-scale introduction of fuel cell vehicles would require technological improvements to significantly reduce the PGM content of the fuel cell stack. The basic design of such vehicles greatly influences the vehicle power, a key parameter in determining the total PGM requirement.
World primary copper production is expected to increase due to growing demand. Reflecting the geographical divergence of copper deposits and demanding industries, copper is produced by various production paths, differing in regional and technological aspects and related environmental pressures. For the mitigation of environmental pressures related to global material flows and a more sustainable resource management, policy makers, producers and buyers require information on regional resource efficiencies and effects of the key processes within the global production chain. This study quantifies material flows of refined copper production and environmental pressures along the pyro‐ and hydrometallurgical paths for Chile and Germany. Inventories for involved unit processes are distinguished by region and most commonly applied technologies, including electric power supply. Different production paths are compared by environmental pressure indicators (primary energy requirements, total material requirements, water consumption, GHG emissions, solid waste disposal, sulphur dioxide and arsenic emissions). Alternative options for improvement of technologies and supply patterns in Chile and Germany are compared.
The policy framework for the promotion of hydrogen and fuel cells in Europe : a critical assessment
(2008)
In this article, we analyze flows of the platinum group metals (PGMs) platinum, palladium, and rhodium and the environmental impacts associated with their supply in Europe. A model of the use of PGMs in Europe has been developed, and this is combined with a model of environmental pressures related to PGM production. Seven industrial sectors and product groups form the main users of PGMs in Europe, comprising the chemical, petroleum, and glass industries; jewelry, dentistry, electronic equipment, and car catalysts. Most relevant environmental impacts of secondary production in Europe and primary PGM production in South Africa, Russia, and Canada are taken into account, including emissions of sulphur dioxide and carbon dioxide and total material requirement. The article quantifies the PGM flows to, from, and within Europe in 2004. The automotive industry is the single largest user of primary PGMs, and catalytic converters represent the major PGM end use. The chemical and glass industries also require large amounts of PGM but rely mostly on secondary metals. The environmental impacts of primary production exceed those of secondary production by far. An analysis of the use of car catalytic converters shows that as a result of efforts to reduce air pollutant emissions in Europe, other negative environmental impacts, such as point-source pollution and mining waste, are occurring elsewhere - for example, at extraction and refining sites in Siberia and South Africa.
This article introduces elements of a global governance regime for sustainable resource management. It argues that such an approach is needed to combat the negative impacts arising from resource extraction and use as well as to overcome the co‐ordination problems of decentralized action. A first section summarizes main conflicts arising from limited access to natural resources and security of supply, environmental impacts and the performance of resource‐rich developing countries. A second section analyses existing initiatives for sustainable resource management such as resource funds, efforts to increase transparency, programmes in development co‐operation, standards and certification, material efficiency and resource productivity as well as efforts to limit the consumption of natural resources. Though these initiative have their merits, the article concludes that more systematic institutional mechanisms are needed. The third section introduces those institutional mechanisms: it describes the International Panel for Sustainable Resource Management (launched in November 2007), outlines elements of an international convention on sustainable resource management, develops the agenda for an international agency on the issue and discusses the interaction with existing international bodies such as the World Trade Organization. Written as a policy paper, the paper formulates proposals for various actors, from small‐scale miners to large‐scale global companies and governments. Its intention is to stimulate the debate and to broaden the horizon on the global dimension of using minerals.
The Wuppertal Institute for Climate, Environment and Energy and the UNEP/Wuppertal Institute Collaborating Centre on Sustainable Consumption and Production (CSCP) set out to analyse Japanese dematerialisation and resource efficiency strategies within the 3R scope and searched for options of enhancing resource effi ciency strategies, commissioned by the German Federal Environment Agency. A further task of the project was to initiate a policy dialogue including stakeholders, academia, politics and Japanese and European environmental experts. The following paper summarises findings from the analyses, the results of the policy dialogues (Experts Workshop, 6 June 2007 and International Conference, 6 November 2007) and draws conclusions for a potential Japanese-European cooperation on the resource efficiency issue.
The use of materials and the generation of waste are linked to economic activities and in many projections these are assumed to be a constant ratio of the economic activities. This may be the case considering detailed economic activities and unchanged technology. However, the assumption of constant coefficients is questionable when linking material use and waste generation to aggregated economic activities. Therefore, in this paper, econometrics is used to test the assumption of constant waste coefficients empirically. The analyses show that an assumption of constant waste coefficients is not supported, generally, and amodel allowing for trendwise changing coefficients is developed and used for projections of waste and material flows in 25 European countries.
The material stocks in the anthroposphere are growing faster than ever due to urbanization and growing per capita use. Owing to the growing potential insecurity of raw material supply the evaluation of resources gains increasing attention. Despite growing utilization of anthropogenic deposits, ‘urban mining’ has not yet sufficiently been supported by specific exploration methods. An exploration method for anthropogenic deposits is proposed and described by application to the copper stocks of Switzerland. The method combines material flow analysis with a bottom‐up analysis of material stocks. The stock composition and temporal characteristics are analysed by surveys and literature analysis. The stock amounts to 269±31 kg capita -1 for the year 2000. The retrospective data are used as parameters to construct a dynamic stock model, which is calibrated by historical trade statistics. The potential for drafting scenarios is discussed. The stock situation in Switzerland is reviewed and compared with that of other regions.
This book considers corporate governance of sustainability from a co-evolutionary perspective. It explores the linkages between pro-active approaches at the corporate level, market-based incentives and environmental networks involving various actors. Relevant theory on corporate governance, competition, market failures and regulatory tools is also examined. The authors go on to present an assessment methodology suitable for empirical network analysis at the meso-level, and demonstrate its application using eight case studies. Based on these research results, Raimund Bleischwitz and his team draw important conclusions regarding policy analysis, sustainability assessment and the actors involved.
The enhanced use of biomass for the production of energy, fuels, and materials is one of the key strategies towards sustainable production and consumption. Various life cycle assessment (LCA) studies demonstrate the great potential of bio-based products to reduce both the consumption of non-renewable energy resources and greenhouse gas emissions. However, the production of biomass requires agricultural land and is often associated with adverse environmental effects such as eutrophication of surface and ground water. Decision making in favor of or against bio-based and conventional fossil product alternatives therefore often requires weighing of environmental impacts. In this article, we apply distance-to-target weighing methodology to aggregate LCA results obtained in four different environmental impact categories (i.e., non-renewable energy consumption, global warming potential, eutrophication potential, and acidification potential) to one environmental index. We include 45 bio- and fossil-based product pairs in our analysis, which we conduct for Germany. The resulting environmental indices for all product pairs analyzed range from -19.7 to +0.2 with negative values indicating overall environmental benefits of bio-based products. Except for three options of packaging materials made from wheat and cornstarch, all bio-based products (including energy, fuels, and materials) score better than their fossil counterparts. Comparing the median values for the three options of biomass utilization reveals that bio-energy (-1.2) and bio-materials (-1.0) offer significantly higher environmental benefits than bio-fuels (-0.3). The results of this study reflect, however, subjective value judgments due to the weighing methodology applied. Given the uncertainties and controversies associated not only with distance-to-target methodologies in particular but also with weighing approaches in general, the authors strongly recommend using weighing for decision finding only as a supplementary tool separately from standardized LCA methodology.