Refine
Year of Publication
- 2014 (110) (remove)
Document Type
- Peer-Reviewed Article (40)
- Report (29)
- Part of a Book (15)
- Working Paper (11)
- Conference Object (8)
- Contribution to Periodical (4)
- Doctoral Thesis (2)
- Book (1)
Language
- English (110) (remove)
This report details current and potential recycling of critical metals in Waste from Electrical Electronic Equipment (WEEE). The term "critical metals" is used instead of "rare metals" because the concept incorporates not only supply but also demand. The EU needs access to these metals and recycling can be an important part of the supply-strategy.
The study shows that the current recycling of critical metals in WEEE is very low, but that the potential amount could be increased threefold within 2015. Improving of the recycling of critical metals requires a variety of initiatives tackling different week point in the overall process: better collection, better pre-processing and end-processing, limiting the export of WEEE or used products out of the EU and better design of the EEE-products.
This study shows that data on sales volumes, WEEE composition and the composition of critical metals in EEE is currently insufficient for detailed analysis and monitoring, and addressing this should be a priority. Further, more detailed information on components used in EEE product groups would enable recyclers to identify and access the most materially important components. Dialog between recyclers, smelters and manufacturers could also facilitate product design that supports the recycling process.
Although there are already some qualification offers available for enterprises to support resource efficiency innovations, the high potentials that can be identified especially for small and medium sized enterprises (SMEs) have not been activated until now. As successful change lies in the hands of humans, the main aim of vocational education has to be the promotion of organisational and cultural changes in the enterprises. As there is already a small but increasing number of enterprises that perform very well in resource efficiency innovations one question arises: What are typical characteristics of those enterprises? Leaning on a good-practice approach, the project "ResourceCulture" is going to prove or falsify the hypothesis that enterprises being successful with resource efficiency innovations have a specific culture of trust, which substantially contributes to innovation processes, or even initially enables them. Detailed empirical field research will light up which correlations between resource efficiency, innovation and cultures of trust can be found and will offer important aspects for the improvement of management instruments and qualification concepts for workplace training. The project seizes qualification needs that were likewise mentioned by enterprises and consultants, regarding the implementation of resource efficiency. This article - based on first empirical field research results - derives preliminary indications for the design of the qualification module for the target groups resource efficiency consultants and managers. On this basis and in order to implement "ResourceCulture" conceptual and methodological starting points for workplace training are outlined.
It is widely accepted that environmental awareness is essential, yet does not inevitably lead to responsible use of resources. Additional factors on the individual level include the meaning constructed by the term "resources" and the individual and social norms that influence the relevant behavior. Current didactic concepts do not take into account such aspects. Therefore, this article uses a didactic-psychological approach for designing an educational concept for raising awareness for a responsible use of natural resources. Combining insights of environmental psychology and of constructivist didactics, a general principal of "norm-oriented interpretation learning" is outlined to enrich the didactic debate on responsible and efficient resource use. Based on the presentation of a qualifying module for resource efficiency consultants as a practical example of resource education, a new didactical approach, namely "open-didactic exploration" (short form: ODE) is introduced. The article discusses the theory-based elements of ODE and illustrates a step by step process for designing educational materials. This adds to the theoretical debate about a didactic design for resource oriented education. Furthermore, this method can be directly used by practitioners developing education and training material (e.g., teachers, trainers in vocational education). The Wuppertal Institute developed and applied this method in numerous projects. The conclusion and outlook discusses future expectations and scope of the introduced ODE method as a contribution to foster "norm-oriented interpretation learning", suggesting perspectives for further development.
Techno-economic feasibility study of solar and wind based irrigation systems in Northern Colombia
(2014)
Water pumping systems powered by solar and wind energy are a clean, decentralized and economic alternative for the irrigation of crops. The intense droughts experienced in the last years in Northern Colombia due to particularly strong Nino Phenomena have reactivated the need of reliable water pumping irrigation systems in that region. This study aims to assess the techno economic feasibility of solar and wind based pumping irrigation system, taking as case study the Municipality of Piojo in the Atlantico department. In the first stage of the study the irrigation water requirements were determined by using the software CROPWAT based on two different crop patterns that represent existing feasible alternatives for small farmers of the region: i) a common crop pattern, which represent the current average distribution of crops for subsistence farming and ii) a fruit cash crop pattern that comprises crops for which well established markets in the region exist. Solar wind and diesel based pumping systems were sized based on the crop water demands for 1 ha. The unit irrigation costs of the three technologies, the two crop patterns and the three irrigation methods (surface, sprinkler and drip) were calculated and compared. The economical analysis was complemented with a cost-benefit analysis over 20 years. Our results show that both renewable energy based pumping systems (wind and solar) can cover the irrigation water demands of small farmers in the region. The economical analysis shows that windmills are the most cost effective solution followed by the solar pumping system. Diesel pumping system was the less cost effective, even though it does not comprise investment in water storage tank. The cost benefit analysis demonstrates that any irrigation system is financially unfeasible when providing water to a common crop pattern. In case of the fruit cash crop scenario the highest dividends were obtained by the wind pumping system and the lowest dividends by the diesel pumping system. The lowest payback period was obtained by the windmill after 7 years and could be even feasible after the fifth year if the surplus water would be used to irrigate larger areas. Dividends obtained in a fruit cash crop scenario with irrigation after 20 years were in the range of EUR 5200 and EUR 11200 higher than dividends obtained by the same crop pattern but without irrigation.
In the light of the tremendous challenges facing the energy systems of the Middle East and North Africa (MENA), a number of concepts, roadmaps and scenario studies have emerged, describing potential transformation pathways towards a more sustainable, renewable-based, energy supply future in the region. Our article uses the scientific approach of "transition research" to analyze the most pertinent publications and concepts in this field to identify the key drivers and barriers for the transformation of the regional energy systems. The analysis likewise includes an assessment of possible indicators and indexes that can be used to monitor the sustainability of the transformation process of MENA energy systems.
The diversification of the national electricity generation mix has risen to the top of Tunisia's energy planning agenda. Presently, natural gas provides 96% of the primary energy for electric power generation, but declining domestic gas reserves and a soaring electricity demand are urgently calling for alternative fuel strategies. Currently discussed diversification options include the introduction of coal and nuclear power plants and/or an increased use of renewable energies. This article presents a methodology to assess different electricity system transformation strategies. By combining an electricity market model with a subsequent multi-criteria decision analysis (MCDA), we evaluate five power mix scenarios regarding power generation costs as well as non-economic dimensions such as energy security, environmental impact and social welfare effects. Based on criteria valuations obtained during consultations with Tunisian stakeholders, a final, best-ranking electricity scenario was selected, consisting of 15% wind, 15% solar and 70% natural gas-generated electricity in the national power mix by 2030.
Global warming, the overall extraction of minerals and the expansion of cultivated land for biomass harvest are growing globally. These "Big Three" represent key environmental pressures which may lead to a continuous degradation of the living environment, if not controlled at levels with acceptable low risk. The situation is complex, because countries and regions consume products which require resources such as minerals and land in various parts of the world. Nevertheless, it is possible to measure the global resource use which is associated with the domestic consumption. In order to inform policies at the national and supranational level whether it may be necessary to adjust the incentive framework for industry and households, reference data are needed to compare the status quo of their countries with what may be deemed acceptable at a global level. This chapter outlines a rationale for the derivation of possible long-term targets for total material consumption of abiotic materials (TMCabiot) and global land use for crops (GLUcropland). The indicated targets are expressed in tentative per capita values which may serve as a first orientation and basis for further debate and research.
The current flow of carbon for the production, use, and waste management of polymer-based products is still mostly linear from the lithosphere to the atmosphere with rather low rates of material recycling. In view of a limited future supply of biomass, this article outlines the options to further develop carbon recycling (C-REC). The focus is on carbon dioxide (CO2) capture and use for synthesis of platform chemicals to produce polymers. CO2 may be captured from exhaust gases after combustion or fermentation of waste in order to establish a C-REC system within the technosphere. As a long-term option, an external C-REC system can be developed by capturing atmospheric CO2. A central role may be expected from renewable methane (or synthetic natural gas), which is increasingly being used for storage and transport of energy, but may also be used for renewable carbon supply for chemistry. The energy input for the C-REC processes can come from wind and solar systems, in particular, power for the production of hydrogen, which is combined with CO2 to produce various hydrocarbons. Most of the technological components for the system already exist, and, first modules for renewable fuel and polymer production systems are underway in Germany. This article outlines how the system may further develop over the medium to long term, from a piggy-back add-on flow system toward a self-carrying recycling system, which has the potential to provide the material and energy backbone of future societies. A critical bottleneck seems to be the capacity and costs of renewable energy supply, rather than the costs of carbon capture.
In contrast to the original investigation by William Stanley Jevons, compensations of energy savings due to improved energy efficiency are mostly analyzed by providing energy consumption or greenhouse gas emissions. In support of a sustainable resource management, this paper analyzes so-called rebound effects based on resource use. Material flows and associated expenditures by households allow for calculating resource intensities and marginal propensities to consume. Marginal propensities to consume are estimated from data of the German Socio-Economic Panel (SOEP) in order to account for indirect rebound effects for food, housing and mobility. Resource intensities are estimated in terms of total material requirements per household final consumption expenditures along the Classification of Individual Consumption according to Purpose (COICOP). Eventually, rebound effects are indicated on the basis of published saving scenarios in resource and energy demand for Germany. In sum, compensations due to rebound effects are lowest for food while the highest compensations are induced for mobility. This is foremost the result of a relatively high resource intensity of food and a relatively low resource intensity in mobility. Findings are provided by giving various propensity scenarios in order to cope with income differences in Germany. The author concludes that policies on resource conservation need to reconsider rebound effects under the aspect of social heterogeneity.
Purpose - Since the registration of the first clean development mechanism (CDM) project in 2004, the CDM has seen a dynamic expansion: the CDM pipeline currently comprises 6,725 projects generating 2.73 billion certified emission reductions (CERs) up to 2012. These CERs result in a substantial financial flow from Annex I to Non-Annex I countries. But CDM projects also result in investments in low carbon technologies, a substantial share of which is focused on the energy sector. The total installed capacity of all CDM projects amounts to 288,944 MW. However, the CDM is not widely taken up in Africa. This holds true for Africa's share in the CDM project pipeline (2.62 per cent), for Africa's share in CERs generated up to 2012 (3.58 per cent) and for the normalized CERs per capita, per country. Two hypothesizes are commonly discussed: first, the continent features low per capita emissions and low abatement potentials. Second, African countries may be hampered by weak institutional frameworks. This article reviews both hypotheses and presents new empirical data. The paper aims to discuss these issues.
Design/methodology/approach - Investigating the greenhouse gas (GHS) abatement potential of 16 energy-related sectors for 11 selected least developed countries in sub-Saharan Africa shows a total theoretical CDM potential of 128.6 million CERs per year. Analyzing investment indicators confirms that most countries are impeded by below average investment conditions.
Findings - It is concluded that Africa offers a considerable range of substantial abatement potentials. However, the weak institutional framework is limiting the uptake of the CDM in Africa. This is underpinned by an analysis which shows if a CDM sector has high investment cost, Africa will have a low share in the sector. If the sector has low investment needs per CER, Africa's share in the CDM sector will be bigger. Investment needs and Africa's share in the pipeline feature a negative correlation.
Research limitations/implications - Supporting CDM development in Africa should not be constraint to technical assistance. It will be crucial to develop an integrated financing approach, comprising the CDM as a co-financing mechanism, to overcome the institutional challenges.
Originality/value - Until today, there are few empirical studies that use concrete criteria and indicators to show why the CDM is underrepresented in Africa. The work presented here contributes to filling this gap.
Sustainability policy in the early 2000s is based on and therefore influenced by scientific literature on "transition". The importance of this link has inspired the authors to explore the structure of cooperating authors and citation networks in the field. In order to understand "transition" literature, we compare it with an alternative term for change, "transformation", which is also used in the context of socio-technical shifts towards sustainability. We expose the different structures of these fields with an overview of keywords, key references, key authors, and the coherence between references and authors. By analysing co-author and citation networks, we find large differences in these groups of documents. The transition literature is characterised by a large network of directly and indirectly cooperating authors with clear clusters; transformation literature contains smaller author networks. Key transition authors are predominantly Dutch. They repeatedly write together and cite each other's work. The transition literature is tightly knit with high degrees of internal references and a clearly distinguishable core. Transformation literature has fewer connections between authors and articles. The connecting articles, each with many global citations, form its basis. This analysis can be used as a step to continue the debate on the role of transition and transformation literature in sustainability and renewable energy policy. The transformation literature teaches us that older streams of thought are still relevant and may be used as "glue" for linking change with respect to sustainable energy to wider developments. Rediscovering existing literature in new combinations may lead to promising new views on sustainable energy.
This paper reflects the socio-economic power of renewable energy production cooperatives for a wider energy system transformation in Germany. Energy cooperatives have turned into important supporters of renewable and decentralised energy structures, due to their strong growth since the year 2006, their participation in local renewable energy projects and their democratic awareness. The cooperative form of coordinating local renewable energy projects applies to a decentralised energy system that is managed by many smaller firms - a system concept that is preferred by the majority of German citizens. However, there is not enough knowledge to understand to what extent this organisational form is able to unify a broad group of actors in promoting a renewable energy system (societal power) and to gather capital for elaborating renewable energy supply structures (economic power).
The reflection is based on an empirical assessment of all energy cooperatives that were registered in Germany before 31st December 2013. Their growth dynamic and their business approaches are discussed. A special focus lies on renewable energy production cooperatives. The study presents the development of their members, their capital, their profit and loss, as well as their investment intensity over a timeframe of three years (2010-2012). The socio-economic potential of renewable energy production cooperatives for supporting a renewable energy system is discussed against the background of empirical results.
Among the factors that decelerate progress of CCS demonstration and deployment is the lack of public acceptance of local projects in Germany as well as in other countries. The study presented here aims to take the issue of public CCS perceptions further by empirically investigating the relevance of different specifications of the three main steps of the CCS chain, i.e. capture, transport and storage. An experimental approach is chosen and applied in an online survey with a representative sample from Germany with 1830 participants. With regard to possible CO2 sources we varied whether the CO2 of a specific setting is captured i) as part of an energy-intensive industry process (e.g. production of steel or cement), ii) from a power plant running on biomass, or iii) a coal-fired power plant. For transport, half of the settings described made reference to transport of CO2 via pipelines, the other half did not provide information about transport. With regard to storage the setting descriptions i) either explained that CO2 can be stored in saline aquifers, ii) can be used to enhance gas production from an emptying natural gas field or iii) can be stored in a depleted natural gas field. We find that overall the average of the ratings for perception of the settings fall into the neutral part of the answering scale. If the source of CO2 is a coal-fired power plant the setting is perceived less positively than if it includes biomass or industry. A significant interaction effect between transport and storage specifications is observed. This points out that storage in saline aquifers is perceived more negatively than a combination with enhanced gas recovery while storage in a depleted natural gas field is rated less positively if a pipeline is mentioned and more positively if no transport option is mentioned.
Energy for transport
(2014)
Global transportation energy use is steeply rising, mainly as a result of increasing population and economic activity. Petroleum fuels remain the dominant energy source, reflecting advantages such as high energy density, low cost, and market availability. The movement of people and freight makes a major contribution to economic development and social well-being, but it also negatively impacts climate change, air quality, health, social cohesion, and safety. Following a review published 20 years ago in the Annual Review of Environment and Resources (then named the Annual Review of Energy and the Environment) by Lee Schipper, we examine current trends and potential futures, revising several major global transport/energy reports. There are significant opportunities to slow travel growth and improve efficiency. Alternatives to petroleum exist but have different characteristics in terms of availability, cost, distribution, infrastructure, storage, and public acceptability. The transition to low-carbon equitable and sustainable transport will take time but can be fostered by numerous short- and medium-term strategies that would benefit energy security, health, productivity, and sustainability.
Sustainable strategies
(2014)
At current primary steel production levels, the iron and steel industry will fail to meet the 80% emission reduction target without introduction of breakthrough technologies (Wörtler et al., 2013: 19). The current research analyses the technical and economical long-term potential of innovative primary steel production technologies in Germany throughout 2100. Techno-economic models are used to simulate three innovative ore-based steelmaking routes verses the reference blast furnace route (BF-BOF). The innovative routes in focus are blast furnace with CCS (BF-CCS), hydrogen direct reduction (H-DR), and iron ore electrolysis (EW). Energy and mass flows for the production of one tonne of crude steel (CS) are combined with hypothetical price, cost, and revenue data to evaluate the production routes economically, technically, and environmentally. This is a purely theoretical analysis and hence further external factors that may influence practical implementation or profitability are not considered.
Different future developments are considered by using three scenarios, representing an ambitious, a moderate, and a conservative transformation of the German energy sector. In general, looking into the future bares various uncertainties which should be reflected in a suitable manner.
According to the present scenario analysis, chances are that with rising prices for coal and CO2 allowances BF-BOF and even BF-CCS become unprofitable by mid-century. With a high share of renewable energy sources and high prices for CO2 allowances, H-DR and EW become economically attractive in the second half of the current century, when BF-based routes are long unprofitable. Energy and raw material efficiency is significantly higher for H-DR and EW and furthermore, the 80% reduction target by 2050 can be achieved in the ambitious scenario. However, high investment costs and high dependency on electricity prices prohibit a profitable implementation before 2030–2040 without further subsidies. EW is the most energy and resource efficient production route. Since continuous electricity is needed for the continuous operation, the electricity costs are 20–40% higher than for H-DR (with high-capacity hydrogen storage units). Even though hydrogen production implies efficiency losses compared to the EW route, the decoupling of hydrogen production from continuous operation of the steel plant through hydrogen storage offers the opportunity to use cheap excess renewable electricity. This makes the H-DR economically and environmentally the most attractive route and provides a crucial contribution to stabilize the grid and to store excess energy in a 100% renewable energy system.
Industry
(2014)
The buildings sector accounts for more than 30% of global greenhouse gas emissions. Despite the well-known economic viability of many energy-efficient renovation measures which offer great potential for reducing greenhouse gas emissions and meeting climate protection targets, there is a relatively low level of implementation. We performed a citation network analysis in order to identify papers at the research front and intellectual base on energy-efficient renovation in four areas: technical options, understanding decisions, incentive instruments, and models and simulation. The literature was reviewed in order to understand what is needed to sufficiently increase the number of domestic energy-efficient renovations and to identify potential research gaps. Our findings show that the literature on energy-efficient renovation gained considerable momentum in the last decade, but lacks a deep understanding of the uncertainties surrounding economic aspects and non-economic factors driving renovation decisions of homeowners. The analysis indicates that the (socio-economic) energy saving potential and profitability of energy-efficient renovation measures is lower than generally expected. It is suggested that this can be accounted for by the failure to understand and consider the underpinning influences of energy-consuming behaviour in calculations. Homeowners׳ decisions to renovate are shaped by an alliance of economic and non-economic goals. Therefore, existing incentives, typically targeting the economic viability of measures, have brought little success. A deeper understanding of the decisions of homeowners is needed and we suggest that a simulation model which maps the decision-making processes of homeowners may result in refining existing instruments or developing new innovative mechanisms to tackle the situation.
Living Labs for Sustainable Development aim to integrate users and actors for the successful generation of low-resource innovations in production-consumption systems. This paper investigates potentials of and measures towards the realization of a German Living Lab infrastructure to support actor-integrated sustainability research and innovations in Germany. Information was primarily derived from extensive dialog with experts from the fields of innovation, sustainable development and the Living Lab community (operators, users, etc.), which was facilitated through interviews and workshops. A status quo analysis revealed that, generally, the sustainability and Living Lab communities are hardly intertwined. Twelve Living Labs that explicitly consider sustainability aspects were identified. The application fields "Living and Working", "Town, Region and Mobility", and “Retail and Gastronomy" were identified as particularly suitable for investigation in Living Labs and highly relevant in terms of resource efficiency. Based on the analyses of drivers and barriers and SWOT, keystones for the development of a research infrastructure for user integrated development of sustainable products and services were formulated. Suggested strategies and measures include targeted funding programs for actor-integrated, socio-technical research based on a Living Lab network, a communication campaign, and programs to foster networking and the inclusion of SMEs.
The limited data availability, transparency and harmonisation in environmental assessments of products are bottlenecks for improved environmental and sustainability governance. Despite the progressive developments of information and communication systems, reliable, accurate, up-to-date data for assessing the resource use of products and services is still lacking. Resource accounting systems often have limited scope on single companies, processes or products. This paper presents an approach for an automated bottom-up accounting system for measuring resource efficiency at product and service level. It is based on a global collaborative network of resource accounting nodes connected for the accounting of natural resources use for products and services. Using an Internet-based service-oriented architecture, relevant and timely data is passed from supplier to customer recursively through the whole value chain to produce an "ecoCost" for each product or service. This conceptual paper reflects first experiences from partners of the myEcoCost project funded by European Commission (www.myecocost.com).
Based on a description of the starting position and the aim of the research project "Further development of a concept for monitoring and reporting of the International Climate Initiative (ICI)", this final report summarises the results generated in this endeavour. It also describes the key activities which were conducted to work out the results. In two years time, the project aimed to develop a scientifically sound and at the same time practical monitoring and reporting concept which should deliver information about the impacts of the ICI. It started from an initial analysis of the current ICI approach and of the monitoring and reporting approaches applied in other climate finance instruments.
This policy brief discusses the opportunities and obligations of host country DNAs within the Standardized Baselines framework and identifies options for strategic intervention. Host countries can, for example, intervene by selecting the right sectors for which they develop an SB in the first place. DNAs can also tailor their SBs to some extent to support certain technologies, fuels or feed- stocks over others by choosing the right level of aggregation of the sector to be covered. Last but not least, the paper discusses the DNAs' role in managing the data for the development and maintenance of the SB. Host countries should take full advantage of potential synergies between data collection for SBs and other data intensive processes such as national greenhouse gas inventories or national statistics. SBs and the data gathered in the process of developing them can also be a basis for the development of other mitigation instruments such as Nationally Appropriate Mitigation Actions (NAMAs) or New Market Mechanisms (NMM).
Generating social practices
(2014)
Changing consumer behaviour is key to reducing the environmental effects of industrialised societies. Social practice theories provide an integrated approach to understanding consumer behaviour. The mechanisms underlying the emergence and diffusion of social practices are however until now poorly understood. This paper presents a conceptual framework and an abstract agent-based simulation model for generating social practices which use and extend approaches from social practice theories. The main results are twofold. First, the simulation model is able to generate social practices, what confirms that the conceptual framework captures relevant elements and processes. Second, a new mechanism for behavioural lock-in is identified that provides additional insights into the widely acknowledged challenge of changing social practices and respective consumption.
The lack of suitable tools to assess sustainable mobility measures' costs, benefits and overall impacts is a significant factor impeding their implementation. Cost-benefit analysis (CBA) is often applied to large-scale infrastructure projects, but does not capture all relevant socio-economic impacts. Small-scale but potentially highly cost-effective measures often do not have the critical mass to warrant a thorough cost-benefit analysis. This paper reviews existing assessment methodologies, including their advantages, limitations and application to different urban mobility measures, and current assessment practice in cities based on survey results. Based on these analyses, a holistic approach for project appraisal is proposed, consisting of aspects of a multi-criteria analysis (MCA) and CBA and applicable to a variety of urban mobility measures.
There are a variety of economic and ecological benefits to increased resource efficiency. Social, institutional and technical innovations can all contribute towards efficiency increases. Companies face different hurdles in fostering such innovation. Small and medium-sized companies are subject to specific constraints that may prevent them from benefiting from innovation-induced resource efficiency improvements. Qualitative interviews were conducted among German small and medium-sized enterprises (SMEs) and intermediaries to identify barriers for resource efficiency innovations and to elaborate a policy mix at the federal level that could help SMEs to overcome these. We found five major barriers to resource efficiency innovations in German SMEs, comprising deficits in innovation culture, inter-firm cooperation along the value chain, finance, awareness and take-up of government funds. We propose a distinct policy mix as a response to this situation. The policy mix comprises the interlocking and synergistic elements of government funding schemes, innovation agents and innovation laboratories.
Policy evaluation is widely considered important for assessing policies for effectiveness and impact. Municipalities are among the political actors implementing energy and climate policy. Yet, few municipalities have introduced adequate instruments to monitor the effectiveness of their actions. Often, municipal actors consider local greenhouse gas (GHG) inventories to be sufficient to monitor the impact of their actions. This paper points out why the expectations placed on local GHG inventories as a monitoring instrument can rarely be met in practice. On the basis of German examples, it shall be shown that a thorough calculation of actual local energy and GHG reductions attributable to local efforts is often only partially possible, and is complicated by external factors. A supplementary approach to the top-down method is to evaluate local programmes from the bottom-up. This paper discusses efforts to develop an instrument for a bottom-up monitoring of the city of Hamburg's Climate Action Plan.
Using results-based finance for climate action : existing initiatives and the role of the CDM
(2014)
Results-based finance is receiving increasing attention, being considered as a potential key funding mode in climate finance. The Clean Development Mechanism has been cited to potentially contribute to this goal. Against this background, the policy brief outlines the rationale of the concept and analyses six climate change mitigation initiatives that build on the results-based finance approach. The analysis puts a special focus on the role of the CDM.
The Clean Development Mechanism (CDM) is in crisis. More and more market participants are leaving the sector. In the light of this development, some argue that governments should step in as buyers of Certified Emission Reductions (CERs). Given the limited volumes of public funding, however, governments will have to prioritise some projects over others. This policy brief therefore analyses national purchase programmes and multilateral carbon funds in order to identify criteria public investors are applying in the selection of the projects they finance. The aim is to identify a vision of a high quality CDM project that be can be made use of when designing a possible support programme.
The paper suggests a sustainable material footprint of eight tons, per person, in a year as a resource cap target for household consumption in Finland. This means an 80% (factor 5) reduction from the present Finnish average. The material footprint is used as a synonym to the Total Material Requirement (TMR) calculated for products and activities. The paper suggests how to allocate the sustainable material footprint to different consumption components on the basis of earlier household studies, as well as other studies, on the material intensity of products, services, and infrastructures. It analyzes requirements, opportunities, and challenges for future developments in technology and lifestyle, also taking into account that future lifestyles are supposed to show a high degree of diversity. The targets and approaches are discussed for the consumption components of nutrition, housing, household goods, mobility, leisure activities, and other purposes. The paper states that a sustainable level of natural resource use by households is achievable and it can be roughly allocated to different consumption components in order to illustrate the need for a change in lifestyles. While the absolute material footprint of all the consumption components will have to decrease, the relative share of nutrition, the most basic human need, in the total material footprint is expected to rise, whereas much smaller shares than at present are proposed for housing and especially mobility. For reducing material resource use to the sustainable level suggested, both social innovations, and technological developments are required.
A decent, or sufficient, lifestyle is largely considered an important objective in terms of a sustainable future. However, there can be strongly varying definitions of what a decent lifestyle means. From a social sustainability point of view, a decent lifestyle can be defined as the minimum level of consumption ensuring an acceptable quality of life. From an ecological sustainability point of view, a decent lifestyle can be defined as a lifestyle that does not exceed the carrying capacity of nature in terms of natural resource use. The paper presents results of a study on the natural resource use of 18 single households belonging to the lowest income decile in Finland. The yearly "material footprint" of each household was calculated on the basis of the data gathered in a questionnaire and two interviews. The results show that the natural resource use of the participating households was lower than the one of the average consumer. Furthermore, 12 of 18 households had a smaller material footprint than the "decent minimum" reference budget defined by a consumer panel. However, the resource use of all the households and lifestyles studied is still higher than long-term ecological sustainability would require. The paper concludes that the material footprint is a suitable approach for defining and measuring a decent lifestyle and provides valuable information on how to dematerialize societies towards sustainability.
The concept Material Input per Service Unit (MIPS) was developed 20 years ago as a measure for the overall natural resource use of products and services. The material intensity analysis is used to calculate the material footprint of any economic activities in production and consumption. Environmental assessment has developed extensive databases for life cycle inventories, which can additionally be adopted for material intensity analysis. Based on practical experience in measuring material footprints on the micro level, this paper presents the current state of research and methodology development: it shows the international discussions on the importance of accounting methodologies to measure progress in resource efficiency. The MIPS approach is presented and its micro level application for assessing value chains, supporting business management, and operationalizing sustainability strategies is discussed. Linkages to output-oriented Life Cycle Assessment as well as to Material Flow Analysis (MFA) at the macro level are pointed out. Finally we come to the conclusion that the MIPS approach provides relevant knowledge on resource and energy input at the micro level for fact-based decision-making in science, policy, business, and consumption.
Technology cooperation : update on the technology mechanism and options for using carbon markets
(2014)
This policy brief provides a general overview on the setup of the UNFCCC's Technology Mechanism, exploring potential synergies between the mechanism and carbon market instruments such as the CDM.
There are two branches of the Technology Mechanism: the Technology Executive Committee (TEC), which is tasked to give political advice, and the Climate Technology Centre and Network (CTCN), providing support and fostering the operationalization of technology transfer. Both institutions strongly focus on capacity building.
The CDM, instead, has contributed to technology transfer in practice. However, the transfer has largely focused on equipment and basic operational knowledge. The transfer of knowledge to adapt, advance and innovate has been limited so far.
Therefore, the two mechanisms could well complement each other. In theory, Programmes of Activities and Standardized Baselines under the CDM could be a means for developing country governments to strategically address financial barriers to technology transfer.
The objective of the concept paper is to propose an operational definition for what transformational change means in the context of NAMAs, taking into consideration ongoing discussions among NAMA experts, and to give an overview of theoretical approaches to sustainability transitions and transformational change, exploring their possible applicability to NAMAs. The theoretical approaches are the basis to propose hypotheses for the dynamics, indicators and success factors that foster transformational change, which is necessary to assess whether a NAMA intervention has been or can be transformational to achieve low carbon and sustainable development goals. This paper will serve as the basis for further exploration of a framework to assess the potential for transformational impacts of NAMAs.
This guidebook - developed by the Wuppertal Institute - is meant to accomplish two things: i) to provide some hands-on examples of how the transformational impact of capacity development activities can be enhanced and ii) to give some guidance on identifying which activities should be funded. Applying these guidelines will (hopefully) help to create the enabling conditions needed to increase the transformational impact of climate finance. Moreover, this guidebook should be seen as a bridge between the work of development cooperation and the global debate on transformation by giving guidance and demonstrating the practical value of this concept.
Since in 1992 the United Nations Conference on Environment and Development (UNCED) has been held in Rio de Janeiro, efforts to achieve sustainable development appear to have made only insufficient progress, as the results of the 2012 follow-up conference show. One reason for this is that among the various paths to sustainability being discussed, the strategies enjoying greater support are those that continue to be committed to economic and material growth, this as opposed to those that question the growth paradigm. Among the latter are the sufficiency and subsistence approaches. The sufficiency approach delves into the causes and (supposed) boons of a continuous increase in material and immaterial goods. With the demand that individuals not always be forced to always want more, it points out a way to a structural transition in society. The subsistence approach, on the other hand, seeks to draft a path to greater autonomy and quality of life by strengthening regional, local or indi-vidual self-provisioning. To be in harmony with sustainability, it must be possible to freely choose the two ways of life; they must not be mandated by the authorities.
A desirable future critically depends on our ability to ensure the supply of key resources while simultaneously respecting planetary boundaries. This paper looks at the potential implications of living within the "safe operating space" for people, business and the economy. It develops a positive vision of the future based on three pillars: a safe and fair use of global resources, a sustainable society, and a transformed economy. We review and build on recent sustainability visions to develop a holistic reflection on what life in 2050 could look like, and explore the key changes in the economy needed to get there. In particular we show that resource efficiency requires a systemic shift in values, innovation, governance and management regimes. We present a bold vision for Europe underlined by indicators and targets, explore transition challenges to getting there and conclude with a list of key policies needed for overcoming challenges and reaching the vision.
The 2014 United Nations Climate Change Conference had been scheduled from 1 to 12 December in Lima/Peru. While in the run-up to the conference, China and the US in a surprise bilateral move had announced plans to cut greenhouse gas emissions that exceeded expectations, the conference was characterised once again by a deep division between key players from the former so-called "developed" and "developing" world. The negotiations thus took 32 hours longer than planned and ended on Sunday morning at 1.22 am. More importantly, the conference failed almost completely to resolve the tasks it was supposed to do in order to prepare the last round of negotiations before next year's conference in Paris 2015, which is supposed to deliver a comprehensive future climate agreement. A team of researchers from the Wuppertal Institute attended the conference and have compiled a first assessment of the results.
This paper analyses the results of the climate conference in Lima 2014 in the light of the coming climate summit in Paris by the end of this year (COP21). The authors from the Wuppertal Institute make recommendations for the improvement of the current cooperation in the context of the climate convention and they suggest to complement the existing UN regime with a club of forerunner countries in order to provide new breath for international climate policy.
The results presented in this article illustrate how the local public was informed on specific Carbon Capture and Storage (CCS) projects by regional newspapers in Germany. The analyzed articles were published in four daily newspapers within the German regions where four CO2 onshore storage projects took place or have been planned. The articles were published between 2007 and 2011. In total, 1,115 newspaper articles about the four CO2 onshore storage projects were gathered and analyzed both qualitatively and quantitatively. Our results showed that the regional media coverage of CCS projects in Germany reached peaks in 2009 and 2010. The main topics changed within the media coverage and it is worth mentioning to what extent the media coverage of CCS disregarded topics with regard to economic, technical, ecological or scientific aspects on CCS. The overall evaluation of CCS within the articles is negative. While commercial CCS projects received more negative evaluation across newspaper articles; opinions about the research and industry project Ketzin were more neutral.
The food and agricultural sector will face numerous challenges in the next decades, arising from changing global production and consumption patterns, which currently go along with high resource use, causing ecological and socio-economic impacts. The aim of this paper is to illustrate and evaluate the practical applicability of the Hot Spot Analysis methodology in the context of supply chain management in companies. The HSA is a method to identify social and ecological problems along the entire life cycle of a product. Special emphasis is put on a customized implementation in the value chain beef of McDonald's Germany. The HSA of McDonald's beef value chain shows that the main ecological problems arise in the phase of raw material extraction, whereas the main social problems can be identified in the phase of slaughtering. Finally, the paper shows potentials and shortcomings of such a customized application and how the results can be implemented in the sustainability management of a company.
Despite rising prices for natural resources during the past 30 years, global consumption of natural resources is still growing. This leads to ecological, economical and social problems. So far, however, limited effort has been made to decrease the natural resource use of goods and services. While resource efficiency is already on the political agenda (EU and national resource strategies), there are still substantial knowledge gaps on the effectiveness of resource efficiency improvement strategies in different fields. In this context and within the project "Material Efficiency and Resource Conservation", the natural resource use of 22 technologies, products and strategies was calculated and their resource efficiency potential analysed. In a preliminary literature- and expert-based identification process, over 250 technologies, strategies, and products, which are regarded as resource efficient, were identified. Out of these, 22 subjects with high resource efficiency potential were selected. They cover a wide range of relevant technologies, products and strategies, such as energy supply and storage, Green IT, transportation, foodstuffs, agricultural engineering, design strategies, lightweight construction, as well as the concept "Using Instead of Owning". To assess the life-cycle-wide resource use of the selected subjects, the material footprint has been applied as a reliable indicator. In addition, sustainability criteria on a qualitative basis were considered. The results presented in this paper show significant resource efficiency potential for many technologies, products and strategies.
The paper examines policies and measures that promote the usage of pedelecs and that contribute to climate friendly passenger transportation thereby. As pedelecs allow the rider to pedal at lower efforts, pedelecs provide the potential to increase the share of bicycle trips in metropolitan regions with hilly landscapes and with a significant share of medium commuting distances. The paper develops attitude-based mobility types and defines their specific pedelec affinity based upon differentiated reasons to use a pedelec. Thereafter policies and measures are examined that foster purchase and usage of pedelecs, and factors influencing the modal behaviour of (potential) attitude-based target groups are defined. Quantification of climate protection effects is conducted based on two scenarios for the German city of Wuppertal, a city known for its steep slopes. The first scenario assumes business as usual, and the second scenario is based on the introduction of ambitious policies and measures to encourage purchase and usage of pedelecs. Following a mixed-method approach, qualitative scenario assumptions are calculated by a quantitative model, which incorporates the analyses on attitude-based mobility types respective pedelec affinities.The results indicate that ambitious promotion of pedelecs significantly contributes to climate change mitigation. Compared to business as usual, ambitious policies and measures to purchase and use pedelecs reduce CO2-emissions of passenger transport in Wuppertal by 11 per cent in 2050. A spatially inclusive and comprehensive 30 kph speed limit proves to be particularly effective. In the scenario of ambitious promotion of pedelecs, interventions solely fostering the purchase of pedelecs significantly increase the modal share of pedelecs, whereas in a business as usual case such efforts remain ineffective. The traditional bicycle profits from the promotion of pedelecs, but its increased usage does not bring about similar climate protection effects.
How urban transport projects are appraised : current practice in the EU ; a common practice reader
(2014)
Limits
(2014)
Poverty
(2014)
Rethink rather than rebound : a sufficiency revolution must precede the efficiency revolution
(2014)
The EU has set itself ambitious targets with regards to a significant reduction of its greenhouse gas emissions and has presented roadmaps depicting an overall decarbonisation of its economy by the middle of the century. In this context European policymakers and stakeholders are currently discussing the targets and the level of ambition of the 2030 climate and energy policy framework. The Commission is expected to present its own vision for the further development of the energy and climate policy framework in its White Paper "For a 2030 climate and energy policy framework". At this decisive point in the political debate the Wuppertal Institute presents a brief working paper that analyses some of the analytical work - particularly the underlying energy and GHG emission scenarios - behind the Commission's proposals to be presented in the forthcoming White Paper.
The 2010 UN climate conference in Cancún emphasized that "Parties should, in all climate change related actions, fully respect human rights". However, so far there is no further guidance. This article discusses the relevant legal human rights norms and two case studies from the Kyoto Protocol's Clean Development Mechanism (CDM). The first case (Bajo Aguán, Honduras) shows that the current absence of any international safeguards can lead to registration of highly problematic projects. The second case (Olkaria, Kenya) suggests that safeguards, introduced here as a side effect of World Bank involvement, can have a positive impact, but that it is necessary to have them based on human rights. It therefore seems recommendable that the UN climate regime develop mandatory human rights safeguards. In addition or alternatively, individual buyer countries or groups of countries, such as the European Union, could introduce their own additional requirements for CDM projects.
This paper draws upon an extensive transdisciplinary scenario development in the context of the stakeholder oriented preparation of the climate protection plan of the German federal state North Rhine-Westphalia, which is home to the most important heavy industry cluster in Europe. In that context we developed differentiated bottom up climate change mitigation strategies and scenarios for the major energy intensive industries aluminium, iron and steel, cement, lime, paper and steam cracker for olefin production together with representatives of industry as well as society.
Enabling the great transformation : transdisciplinarity as individual and institutional challenge
(2014)
Realizing a sustainable future in the Anthropocene requires a "great transformation." The massive technological, economic, social, and cultural change this implies is based on new forms of literacy and knowledge integration. It depends on a highly transdisciplinary "transformative science," i.e., scientific knowledge production that not only focuses on "system knowledge" but also on "target" and on "transformation" knowledge, and thus integrates different disciplines and practical expertise. The existing science system is actually not fulfilling this new social contract between science and society. Frontrunner institutions like the IASS and "transdisciplinary personalities" like Klaus Töpfer are important change agents to bring forward the transformative mission of a future Earth science.
A book promoting policies to make it easier to live the Good Life must do two things. Firstly, it must demonstrate that such policies are necessary; secondly, it must set out how such a policy programme is to be implemented. In other words, it has to show that the politics of sufficiency is feasible.
"The Politics of Sufficiency" deals with claims of feasibility, and with the objections to them. It demonstrates that a politics of the Good Life can be both justified and legitimated in modern free democratic societies - indeed, that it is an essential condition of such societies. The main section of the book sets out in detail how such a politics can be implemented, organised along four political dimensions. At the same time, this book can only represent a beginning, and that is its aim - a starting-point for a broad discussion over the coming years.
The present study investigates and compares the public perception of CO2 offshore storage, CO2 onshore storage and CO2 transport via pipeline in Germany nationwide and in two coastal regions. For this purpose, three representative surveys were carried out and analyzed with the methods of descriptive statistics and ordinal regressions. The results of our descriptive statistical analyses show clear regional differences with regard to self-reported awareness, factual knowledge, risk perceptions and general attitudes towards CO2 offshore/onshore storage and CO2 transport via pipeline. With regard to the public perception of the two storage options - offshore and onshore - no major differences could be identified: both are hardly accepted by the German public. In comparison to CO2 offshore storage/CO2 onshore storage, the attitudes towards CO2 transport via pipeline were perceptibly more positive in all regions. Our regression analyses revealed that the perceptions of the personal and societal risks of CO2 transport via pipeline/CO2 offshore storage/CO2 onshore storage as well as the perceptions of the personal and societal benefits of CCS are the most important direct determinants of general attitudes towards CO2 transport via pipeline, CO2 offshore storage and CO2 onshore storage.
Transport
(2014)
Global climate
(2014)
In what has become normal procedure at the international climate negotiations, the 2013 United Nations climate conference in Warsaw (the nineteenth Conference of the Parties (COP 19) to the United Nations Framework Convention on Climate Change (UNFCCC) and the ninth Conference of Parties serving as the Meeting of the Parties to the Kyoto Protocol (CMP 9)) once again seemed on the brink of collapse and concluded more than one day behind schedule, in the evening of Saturday 23 November 2013. However, on most of the key issues it made only scant progress.
This report lays out the main developments in Warsaw and assesses the main outcomes. It starts with the discussions under the Durban Platform on developing a new comprehensive climate agreement by 2015 and increasing short-term ambition and subsequently covers the issues relating to near-term implementation of previous decisions in the areas of emission reductions and transparency, adaptation, loss and damage, finance and technology.
Increasing concerns regarding the world's natural resources and sustainability continue to be a major issue for global development. As a result several political initiatives and strategies for green or resource-efficient growth both on national and international levels have been proposed. A core element of these initiatives is the promotion of an increase of resource or material productivity. This dissertation examines material productivity developments in the OECD and BRICS countries between 1980 and 2008. By applying the concept of convergence stemming from economic growth theory to material productivity the analysis provides insights into both aspects: material productivity developments in general as well as potentials for accelerated improvements in material productivity which consequently may allow a reduction of material use globally.The results of the convergence analysis underline the importance of policy-making with regard to technology and innovation policy enabling the production of resource-efficient products and services as well as technology transfer and diffusion.
In many developing countries large parts of the population are negatively affected by the lack of access to clean and affordable energy. Providing sustainable energy services to these people has been acknowledged as a key component to reduce poverty. One form of development assistance to address the needs of the energy-poor at the local level are small-scale renewable energy projects. Like all development interventions, these energy projects are not intended to produce short-term outputs, but to create long-term impacts. Thus, it has become increasingly important to evaluate and accurately assess their sustainability. But despite the widely recognized need to identify successes factors and explain failure only few studies exist that address the sustainability of small-scale of energy development efforts post implementation. Against this background the paper presents the results of a post-evaluation of 23 projects supported via the Sustainable Energy Project Support (SEPS) scheme of the WISIONS initiative run by the Wuppertal Institute. The analysis provides insights on the influence that socio-economic, environmental, geographic and gender factors can have on the sustainability of small-scale renewable energy projects in developing countries.
Access to sustainable and affordable energy services is a crucial factor in reducing poverty in developing countries. In particular, small-scale and community-based renewable energy projects are recognized as important forms of development assistance for reaching the energy poor. However, to date only a few empirical evaluations exist which analyze and compare the impact of these projects on local living conditions and their sustainability ex-post implementation.
To better understand the impacts and the conditions that influence sustainability of these projects, the research presented in this paper evaluated 23 local development projects post implementation. By applying an standardized evaluation design to a cross-sectional sample in terms of renewable energy sources (solar, wind, biomass, hydro), user needs (electricity, food preparation, lighting, productive uses), community management models, finance mechanisms and geographical locations, the review results provide valuable insights on the underlying conditions that influence the success or failure of these small-scale local energy interventions. The empirical evidence suggests that the sustainability of small-scale energy implementations (≤100 kW) in developing countries is determined by the same factors, independent of the socio-cultural, political and ecological context. These findings allow to better predict the long-term success of small sustainable energy projects in developing countries, this can help to improve project designs and increase the certainty for future investment decisions.
The role of gender concerns in the planning of small-scale energy projects in developing countries
(2014)
The brochure summarises the project's objectives and methodological approach, its key findings as well as conclusions. Both case studies have shown that technological solutions for low carbon development should be embedded in a well-developed institutional framework to foster their deployment and implementation. Therefore, recommendations for Wuxi include examples of innovative and integrated technical projects for increasing energy and resource efficiency, combining them with recommendations for the development of institutional frameworks. One element of such a framework could be a local energy agency in Wuxi, which would offer support and expertise to potential investors in low carbon technologies. Also for the German pilot region, the brochure offers concrete recommendations how to facilitate low carbon planning within the region.
In this manual, the consortium wants to share the key lessons we have learnt throughout this three-year project and, by doing so, to contribute to the scaling-up of low carbon city development in emerging economies, especially in China. This manual targets organisations from the scientific and civil society sectors that are involved in international low carbon city projects, especially those with a focus on Chinese cities, as well as local govern-ments that are eager to develop a comprehensive low carbon strategy.
Prospects of carbon capture and storage (CCS) in India's power sector : an integrated assessment
(2014)
Objective: The aim of the present article is to conduct an integrated assessment in order to explore whether CCS could be a viable technological option for significantly reducing future CO2 emissions in India. Methods: In this paper, an integrated approach covering five assessment dimensions is chosen. However, each dimension is investigated using specific methods (graphical abstract).
Results: The most crucial precondition that must be met is a reliable storage capacity assessment based on site-specific geological data since only rough figures concerning the theoretical capacity exist at present. Our projection of different trends of coal-based power plant capacities up to 2050 ranges between 13 and 111 Gt of CO2 that may be captured from coal-fired power plants to be built by 2050. If very optimistic assumptions about the country's CO2 storage potential are applied, 75 Gt of CO2 could theoretically be stored as a result of matching these sources with suitable sinks. If a cautious approach is taken by considering the country's effective storage potential, only a fraction may potentially be sequestered. In practice, this potential will decrease further with the impact of technical, legal, economic and social acceptance factors. Further constraints may be the delayed commercial availability of CCS in India, a significant barrier to achieving the economic viability of CCS, an expected net maximum reduction rate of the power plant’s greenhouse gas emissions of 71-74%, an increase of most other environmental and social impacts, and a lack of governmental, industrial or societal CCS advocates.
Conclusion and practice implications: Several preconditions need to be fulfilled if CCS is to play a future role in reducing CO2 emissions in India, the most crucial one being to determine reliable storage capacity figures. In order to overcome these barriers, the industrialised world would need to make a stronger commitment in terms of CCS technology demonstration, cooperation and transfer to emerging economies like India. The integrated assessment might also be extended by a comparison with other low-carbon technology options to draw fully valid conclusions on the most suitable solution for a sustainable future energy supply in India.
The report surveys current proposals and positions on issues such as differentiated participation of countries in the new agreement, a differentiated spectrum of commitments, effort sharing and options for how to organise the negotiation process. The report finds that for the level of participation, the selection of commitment types, and choice of effort-sharing approaches there is no silver bullet. A portfolio approach that incorporates multiple options may be most suited to ensure environmental effectiveness, cost- effectiveness and political feasibility.
The main objective of this article is to evaluate CO2 mitigation potential and to calculate costs avoided by the use of different CO2 mitigation technologies in China's cement sector, namely energy efficiency improvements, use of alternative fuels, clinker substitution and carbon capture and storage (CCS). Three scenarios are designed based on the projection of cement output and technology development over the next 40 years (2010–2050). 2.5, 4.7 and 4.3 Gt tonnes of CO2 will be saved totally in basic scenario and two low carbon scenarios up to 2050. By comparing these technologies along the scenarios, it can be concluded that CO2 emissions can mainly be reduced by energy efficiency improvements and use of alternative fuels. Clinker substitution, which reduces the clinker-to-cement ratio as well as energy intensity, results in significant cost advantages. CCS, including post-combustion capture and oxy-fuel combustion capture, could play an important role in the capture of CO2 in the cement industry, and is expected to be in commercial use by 2030.