Refine
Year of Publication
Document Type
- Peer-Reviewed Article (635) (remove)
Language
- English (635) (remove)
Division
Every diet has an impact on an individual’s health status, the environment, as well as on social concerns. A growing number of meals are consumed in the out-of-home catering sector, in which a systematic sustainability assessment is not part of common practice. In order to close this gap, an instrument was developed as part of the NAHGAST project. After more than one year of using the NAHGAST online tool, it needs to be assessed what positive environmental influences can be realized by using the tool. For this reason, this article deals with the question of whether an online tool can enable stakeholders from the out-of-home consumption sector to revise their meals with regard to aspects of a sustainable diet. In addition, it will be answered how precise recipe revisions of the most popular lunchtime meals influence the material footprint as well as the carbon footprint. In conclusion, an online tool can illustrate individual sustainability paths for stakeholders in the out-of-home consumption sector and enables an independent recipe revision for already existing meals. The results show that even slight changes in recipes could lead to savings of up to a third in carbon footprint as well as in material footprint. In relation to the out-of-home consumption sector, this results in the potential for substantial multiplication effects that will pave the way for the dissemination of sustainable nutrition.
Creating statistics for China's building energy consumption using an adapted energy balance sheet
(2019)
China's regular energy statistics does not include the building sector, and data on building energy demand is included in other types of energy consumption in the Energy Balance Sheet (EBS). Therefore data on building energy demand is not collected based on statistics, but rather calculated or estimated by various approaches in China. This study aims at developing and testing China's building energy statistics by applying an adapted EBS. The advantage of the adapted EBS is that statistical data is from the regular statistical system and no additional statistical efforts are needed. The research result shows that the adapted EBS can be included in China regular energy statistical system and can be standardized in a transparent way. Testing of the adapted EBS shows that China's building energy demand has shown an annual increase of 7.6% since 2001, and a lower contribution to the total energy demand as compared to the developed world. There is also a close link to lifestyle and living standard while industrial energy demand is mainly driven by economy and decoupling of building energy demand with increasing of building floor area, this is due to a considerable improvement of building energy efficiency. The adapted EBS creates a method for China conducting statistics of building energy consumption at the sector level in a uniform way and serves as the basis for any sound building energy efficiency policy decisions.
For achieving a transition towards sustainable development, central importance is attached to science and education, and especially higher education. Suitable formats are needed for empowering students to perform transformative research. On the basis of transdisciplinary and transformative real-world laboratory research and futures studies, we develop encompassing learning and teaching module: the Transformative Innovation Lab (til). The lab builds on insights into five key competencies and three types of knowledge needed for developing socially robust sustainability innovations. In this paper, the main features of this experiential and reflexive format are presented and linked to a handbook for facilitating the lab. Central learnings for implementing the format in existing study programmes from two test runs at two German universities are shared and discussed.
Course change: navigating urban passenger transport toward sustainability through modal shift
(2022)
Staying within the 2 °C (preferably 1.5 °C) limit requires fast and fundamental system changes, also in urban passenger transport. Shifting car traffic to environmentally friendly transport modes is one central strategy to make urban transport more sustainable and climate friendly. However, in most cities car use remains high. Therefore, this paper analyzes what course change is needed regarding direction, scale and speed of change for urban sustainability and climate protection reasons. The paper analyzes the role of modal shift as a strategy in itself and in relation to land-use (avoid) and efficiency (improve) measures. The paper draws on insights from European frontrunning cities and explorative forecasting scenarios calculated with the sophisticated integrated land-use transport model "Ruhr Region 2050". The paper suggests that a significant reduction of urban car use is needed (direction) that roughly equals a fast halving of car use (scale), which has proven feasible under the current socio-political conditions by annual reduction rates of 0.5 to 1.5 percentage points of the trip-based modal share of car use (speed). Significantly reducing car use requires comprehensive and high-intensive measures that go far beyond usual practices. Modal shift measures need to play a crucial role in integrated approaches with land-use (avoid) and efficiency (improve) measures because they have the potential to significantly reduce car use and CO2 emissions and because they can produce comparatively fast effects - which makes modal shift measures first aid approaches to achieve a fast "bending of the curve" of excessive car use and growing CO2 emissions.
Technological breakthroughs and policy measures targeting energy efficiency and clean energy alone will not suffice to deliver Paris Agreement-compliant greenhouse gas emissions trajectories in the next decades. Strong cases have recently been made for acknowledging the decarbonisation potential lying in transforming linear economic models into closed-loop industrial ecosystems and in shifting lifestyle patterns towards this direction. This perspective highlights the research capacity needed to inform on the role and potential of the circular economy for climate change mitigation and to enhance the scientific capabilities to quantitatively explore their synergies and trade-offs. This begins with establishing conceptual and methodological bridges amongst the relevant and currently fragmented research communities, thereby allowing an interdisciplinary integration and assessment of circularity, decarbonisation, and sustainable development. Following similar calls for science in support of climate action, a transdisciplinary scientific agenda is needed to co-create the goals and scientific processes underpinning the transition pathways towards a circular, net-zero economy with representatives from policy, industry, and civil society. Here, it is argued that such integration of disciplines, methods, and communities can then lead to new and/or structurally enhanced quantitative systems models that better represent critical industrial value chains, consumption patterns, and mitigation technologies. This will be a crucial advancement towards assessing the material implications of, and the contribution of enhanced circularity performance to, mitigation pathways that are compatible with the temperature goals of the Paris Agreement and the transition to a circular economy.
This paper presents the evaluation of a regional energy efficiency programme implemented in two "départements" of France. Électricité de France (EDF), a French energy company, provides refurbishment advice and financial incentives to end-users in the residential sector as well as specific training courses and certification to local installation contractors and building firms. Refurbishment measures analysed in this paper are efficient space heating equipment (condensing boilers, heat pumps and wood stoves or boilers), solar water heating systems and the installation of double-glazed windows. A billing analysis based on a survey of programme participants' energy consumption is used to calculate the energy savings attributed to the programme. In order to receive an economic feedback of this demonstration programme, the evaluation of both saved energy and programme costs is of importance. Detailed knowledge of the programme's cost-effectiveness is essential for EDF to achieve the saving obligations imposed by the French White Certificate scheme at the lowest cost. Results of this evaluation can support the development and implementation of further energy efficiency programmes with similar characteristics in other regions of France. The cost-effectiveness is determined from the perspective of the programme participant and the society as well as the energy company in charge of the programme. All cost and benefit components are calculated in Euro per kilowatt-hour, which allows a direct comparison of levelized costs of conserved energy with the avoidable costs of the energy supply system.
During the last century, the consumption of materials for human needs increased by several orders of magnitude, even for non-renewable materials such as metals. Some data on annual consumption (input) and recycling/waste (output) can often be found in the federal statistics, but a clear picture of the main flows is missing. A dynamic material flow model is developed for the example of copper in Switzerland in order to simulate the relevant copper flows and stocks over the last 150 years. The model is calibrated using data from statistical and published sources as well as from interviews and measurements. A simulation of the current state (2000) is compared with data from other studies. The results show that Swiss consumption and losses are both high, at a level of about 8 and 2 kg/(cap year), respectively, or about three times higher than the world average. The model gives an understanding of the flows and stocks and their interdependencies as a function of time. This is crucial for materials whose consumption dynamics are characterised by long lifetimes and hence for relating the current output to the input of the whole past. The model allows a comprehensive discussion of possible measures to reduce resource use and losses to the environment. While increasing the recycling reduces losses to landfill, only copper substitution can reduce the different losses to the environment, although with a time delay of the order of a lifetime.
Last year's conference of the global climate change regime took place from 2 until 15 December 2019 in Madrid, Spain. Despite marking a new record for overtime in the history of the UNFCCC, the conference did not only fail to meet the increasing public demand for swift and strong climate action, it also failed on its formal mandate to finalise the Paris rulebook. A record number of issues were left unresolved and shelved for the next session. COP25 thereby highlighted how much work still lies ahead both domestically and internationally if 2020 is to see a step-up in climate action that is consistent with the long-term goal of the Paris Agreement.
As the recent withdrawal of the United States from the Paris Agreement has shown, political volatility directly affects climate change mitigation policies, in particular in sectors, such as transport associated with long-term investments by individuals (vehicles) and by local and national governments (urban form and transport infrastructure and services). There is a large potential for cost-effective solutions to reduce greenhouse gas emissions and to improve the sustainability of the transport sector that is yet unexploited. Considering the cost-effectiveness and the potential for co-benefits, it is hard to understand why efficiency gains and CO2 emission reductions in the transport sector are still lagging behind this potential. Particularly interesting is the fact that there is substantial difference among countries with relatively similar economic performances in the development of their transport CO2 emissions over the past thirty years despite the fact that these countries had relatively similar access to efficient technologies and vehicles. This study aims to explore some well-established political science theories on the particular example of climate change mitigation in the transport sector in order to identify some of the factors that could help explain the variations in success of policies and strategies in this sector. The analysis suggests that institutional arrangements that contribute to consensus building in the political process provide a high level of political and policy stability which is vital to long-term changes in energy end-use sectors that rely on long-term investments. However, there is no direct correlation between institutional structures, e.g., corporatism and success in reducing greenhouse gas emissions in the transport sector. Environmental objectives need to be built into the consensus-based policy structure before actual policy progress can be observed. This usually takes longer in consensus democracies than in politically more agile majoritarian policy environments, but the policy stability that builds on corporatist institutional structures is likely to experience changes over a longer-term, in this case to a shift towards low-carbon transport that endures.
Practices of urban experimentation are currently seen as a promising approach to making planning processes more collaborative and adaptive. The practices develop not only in the context of ideal-type concepts of urban experiments and urban labs but also organically in specific governance contexts. We present such an organic case in the city of Wuppertal, Germany, centred around a so-called change-maker initiative, "Utopiastadt." This initiative joined forces with the city administration and collaborated with a private property owner and the local economic development agency in an unusual planning process for the development of a central brownfield site. Ultimately, the consortium jointly published a framework concept that picked up the vision of the "Utopiastadt Campus" as an open-ended catalyst area for pilot projects and experiments on sustainability and city development. The concept was adopted by the city council and Utopiastadt purchased more than 50% of the land. In order to analyse the wider governance context and power struggles, we apply the social-constructivist theory of Strategic Action Fields (SAFs). We focused on the phases of contention and settlement, the shift in interaction forms, the role of an area development board as an internal governance unit and the influences of proximate fields, strategic action, and state facilitation on the development. We aim to demonstrate the potential of the theory of SAFs to understand a long-term urban development process and how an episode of experimentation evolved within this process. We discuss the theory's shortcomings and reflect critically on whether the process contributed to strengthening collaborative and experimental approaches in the governance of city development.
The discrepancy between ecologically conscious attitudes and actual behaviour is described as an inner resistance, and as connected with a propensity to ignore the external costs of wealth. Evidence is presented that this propensity is based on pro-material traits such as the positional attitude and the passion for goods. These traits are traced back to control orientation, whereas ecological responsibility is shown to be related to autonomy orientation. The societal origins of these basic orientations, and hence the conditions of reinforcing post-materially and ecologically minded behaviour, are discussed.
Businesses like Airbnb have shown that a successful circular economy (CE) business can operate exclusively online. Although online communication and web appearance attributes have been subject to academic research given accelerated digitization, there is still a lack of knowledge about online attributes and their role in facilitating CE. We close the portrayed knowledge gap by conducting a discrete-choice experiment with best to worst scaling and focusing on the effect of CE experience on the perception of a CE website by ranking nine online attributes, grouped in three subsets. We therefore contribute by identifying online attributes that are perceived as favorable for CE businesses and detect how participation in CE activities affects the perception of these attributes. We find that third-party associated online attributes (e.g., user reviews or third-party guarantees) rank significantly higher throughout CE consumption patterns of the sample, being always amongst the top three attributes. This novel finding on online preferences opens a new direction for further research, as well as allows practitioners to optimize online operations accordingly. Furthermore, we find that users without prior touchpoints with CE have a higher need for information about the business model as compared to CE active users who are more interested in community related attributes.
This paper investigates the multimodal nature of urban congestion and network performance, with the aim of developing practice ready policy tools to alleviate the adverse effects of excess demand, no matter in which mode it realizes. As part of the efforts to get an overall understanding of how congestion is defined in various disciplines, we conduct a literature review of relevant engineering and microeconomics studies. The investigation reveals the main areas where contradiction can be identified between engineering and economics approaches. In a second step, we investigate the results of an expert survey about the principles of congestion analysis from a multimodal perspective. The main contribution of the paper is twofold. First, we draw attention to the pitfalls of oversimplified and narrow viewpoints on congestion. Second, we operationalize these principles in order to enable decision makers to assess the impact of urban transport measures on congestion.
The European Landscape Convention urges countries to involve stakeholders including citizens in the governance of ordinary (urban) landscapes. This paper studies conflicting stakeholder perspectives on urban landscape quality in the context of urban sustainability transitions in six European urban regions in the Netherlands, Italy, France, Croatia, Belarus and the Russian Federation. Repertory grid technique helped to identify the dimensions through which persons evaluate urban landscape quality. Ninety-three (93) interviewees elicited 1400 bipolar constructs, such as "Edible green - Concrete" or "Community, group - Loneliness". They then selected two constructs they consider most relevant in the context of urban sustainability transitions, and ranked all pictures on a 10-points scale. The rankings were analyzed using Multiple Correspondence Analysis. We find that, in spite of the many social and cultural differences between the regions, stakeholders largely agree on the preferred direction of urban transitions; more green and blue spots where people can meet and undertake joint (leisure) activities. The main conflict is between, on the one hand, a preference for organized development and beautification and, on the other hand, naturalness (permeability of soil) and organic development. The paper considers several challenges for transition governance.
In recent decades, better data and methods have become available for understanding the complex functioning of cities and their impacts on sustainability. This review synthesizes the recent developments in concepts and methods being used to measure the impacts of cities on environmental sustainability. It differentiates between a dominant trend in research literature that concentrates on the accounting and allocation of greenhouse gas emissions and energy use to cities and a reemergence of studies that focus on the direct and indirect material and resource flows in cities. The methodological approaches reviewed may consider cities as either producers or consumers, and all recognize that urban environmental impacts can be local, regional, or global. As well as giving an overview of the methodological debates, we examine the implications of the different approaches for policy and the challenges these approaches face in their application on the field.
Urban areas, being responsible for large shares of global greenhouse gas emissions, are important arenas for achieving global decarbonisation. However, the systemic challenge of decarbonisation requires deep structural changes - transitions - that take place across multiple scales and along entire value chains. We argue in this article that understanding the role of urban areas for global decarbonisation therefore requires consideration of their context and analysis of urban areas' contributions to transitions that extend past the individual urban area. We develop an analytical framework that proposes three principal ways urban areas contribute to low-carbon transitions and ten competences that regional and local governance actors have to support them. We apply this framework to the Cologne metropolitan area in Germany to demonstrate the ability of our framework to relate urban-scale activities to more encompassing low-carbon transitions. The paper concludes with future research possibilities.
In order to ensure security of supply in a future energy system with a high share of volatile electricity generation, flexibility technologies are needed. Industrial demand-side management ranks as one of the most efficient flexibility options. This paper analyses the effect of the integration of industrial demand-side management through the flexibilisation of aluminium electrolysis and other flexibilities of the electricity system and adjacent sectors. The additional flexibility options include electricity storage, heat storage in district heating networks, controlled charging of electric vehicles, and buffer storage in hydrogen electrolysis. The utilisation of the flexibilities is modelled in different settings with an increasing share of renewable energies, applying a dispatch model. This paper compares which contributions the different flexibilities can make to emission reduction, avoidance of curtailment, and reduction of fuel and CO2 costs, and which circumstances contribute to a decrease or increase of overall emissions with additional flexibilities. The analysis stresses the rising importance of flexibilities in an energy system based on increasing shares of renewable electricity generation, and shows that flexibilities are generally suited to reduce carbon emissions. It is presented that the relative contribution towards the reduction of curtailment and costs of flexibilisation of aluminium electrolysis are high, whereby the absolute effect is small compared to the other options due to the limited number of available processes.
This paper compares the one-sector neoclassical (Solow) growth model with a neo-Austrian growth model. The solutions of the neoclassical growth model in terms of the golden rule of accumulation and the Ramsey rule are well known, and these conditions are compared with the outcomes of the neo-Austrian growth model, which we derive using a basic three-process model.
In the future, the capacities of renewable SNG (synthetic natural gas) will expand significantly. Pilot plants are underway to use surplus renewable power, mainly from wind, for electrolysis and the production of hydrogen, which is methanated and fed into the existing gas pipeline grid. Pilot projects aim at the energetic use of SNG for households and transport in particular for gas fueled cars. Another option could be the use of SNG as feedstock in chemical industry.
The early stage of development raises the question of whether SNG should be better used for mobility or the production of chemicals. This study compares the global warming potential (GWP) of the production of fossil natural gas (NG) and carbon-dioxide (CO2)-based SNG and its use for car transport versus chemical use in the form of synthesis gas. Since the potential of wind energy for SNG production is mainly located in northern Germany, the consequences by a growing distance between production in the North and transport to the South of Germany are also examined.
The results indicate that CO2-based SNG produced with wind power would lead to lower GWP when substituting NG for both uses in either transport or chemical production. Differences of the savings potential occur in short-distance pipeline transport. The critical factor is the energy required for compression along the process chain.
For the option of “carbon capture and storage”, an integrated assessment in the form of a life cycle analysis and a cost assessment combined with a systematic comparison with renewable energies regarding future conditions in the power plant market for the situation in Germany is done. The calculations along the whole process chain show that CCS technologies emit per kWh more than generally assumed in clean-coal concepts (total CO2 reduction by 72-90% and total greenhouse gas reduction by 65-79%) and considerable more if compared with renewable electricity. Nevertheless, CCS could lead to a significant absolute reduction of GHG-emissions within the electricity supply system. Furthermore, depending on the growth rates and the market development, renewables could develop faster and could be in the long term cheaper than CCS based plants. Especially, in Germany, CCS as a climate protection option is phasing a specific problem as a huge amount of fossil power plant has to be substituted in the next 15 years where CCS technologies might be not yet available. For a considerable contribution of CCS to climate protection, the energy structure in Germany requires the integration of capture ready plants into the current renewal programs. If CCS retrofit technologies could be applied at least from 2020, this would strongly decrease the expected CO2 emissions and would give a chance to reach the climate protection goal of minus 80% including the renewed fossil-fired power plants.
Comparative analysis of environmental impacts of maize-biogas and photovoltaics on a land use basis
(2010)
This study aims to stimulate the discussion on how to optimize a sustainable energy mix from an environmental perspective and how to apply existing renewable energy sources in the most efficient way. Ground-mounted photovoltaics (PV) and the maize-biogas-electricity route are compared with regard to their potential to mitigate environmental pressure, assuming that a given agricultural area is available for energy production. Existing life cycle assessment (LCA) studies are taken as abasis to analyse environmental impacts of those technologies in relation to conventional technology for power and heat generation. The life-cycle-wide mitigation potential per area used is calculated for the impact categories non-renewable energy input, green house gas (GHG) emissions, acidification and eutrophication. The environmental performance of each system depends on the scenario that is assumed for end energy use (electricity and heat supply have been contemplated). In all scenarios under consideration, PV turns out to be superior to biogas in almost all studied impact categories. Even when maize is used for electricity production in connection with very efficient heat usage, and reduced PV performance is assumed to account for intermittence, PV can still mitigate about four times the amount of green house gas emissions and non-renewable energy input compared to maize-biogas. Soil erosion, which can be entirely avoided with PV, exceeds soil renewal rates roughly 20-fold on maize fields. Regarding the overall Eco-indicator 99 (H) score under most favourable assumptions for the maize–biogas route, PV has still a more than 100% higher potential to mitigate environmental burden. At present, the key advantages of biogas are its price and its availability without intermittence. In the long run, and with respect to more efficient land use, biogas might preferably be produced from organic waste or manure, whereas PV should be integrated into buildings and infrastructures.
Biomass-fueled combined heat and power systems (CHPs) can potentially offer environmental benefits compared to conventional separate production technologies. This study presents the first environmental life cycle assessment (LCA) of a novel high-efficiency bio-based power (HBP) technology, which combines biomass gasification with a 199 kW solid oxide fuel cell (SOFC) to produce heat and electricity. The aim is to identify the main sources of environmental impacts and to assess the potential environmental performance compared to benchmark technologies. The use of various biomass fuels and alternative allocation methods were scrutinized. The LCA results reveal that most of the environmental impacts of the energy supplied with the HBP technology are caused by the production of the biomass fuel. This contribution is higher for pelletized than for chipped biomass. Overall, HBP technology shows better environmental performance than heat from natural gas and electricity from the German/European grid. When comparing the HBP technology with the biomass-fueled ORC technology, the former offers significant benefits in terms of particulate matter (about 22 times lower), photochemical ozone formation (11 times lower), acidification (8 times lower) and terrestrial eutrophication (about 26 times lower). The environmental performance was not affected by the allocation parameter (exergy or economic) used. However, the tested substitution approaches showed to be inadequate to model multiple environmental impacts of CHP plants under the investigated context and goal.
This paper addresses future perspectives for the management of resources on an international level. Failures of international open markets result in significant material leakage. Here, taking the example of material used vehicles, we develop elements of an international metal covenant that should allow for a more sustainable management of global material flows in that area. Our proposal is based on two principles: any regulation should actively seek industry participation, taking advantage of business interest in supplying a sufficient quantity of materials while lowering materials costs; and it should also address public issues such as sustainability of recycling and waste. In this paper we first analyse contracts as a tool for bridging gaps in knowledge when multiple actors are involved. We then give empirical evidence for material leakage in the case of used vehicles from Germany, before outlining the elements of a proposed international metals covenant. Finally, we analyse potential impacts and discuss legal and institutional issues.
The exploitation of coltan in Central Africa can be considered a case of conflict minerals due to its nature. Many international organizations and bodies, national governments and private sector organizations seek to address this conflict, in particular via transparency, certification and accountability along the material supply chain. This paper analyses the international trade dimension of coltan and gives evidence on the dimension of illicit trade of coltan. The authors start from the hypothesis that illicit trade of coltan sooner or later will enter the market and will be reflected in the statistics. The paper is structured in the following manner: first, a short section gives a profile of coltan production and markets; second, an overview of the mining situation in the Democratic Republic of Congo (DRC) and related actors. The third section addresses mechanisms, actors and measurement issues involved in the international trade of coltan. The final part draws lessons for certification and conflict analysis and offers some guidance for future research.
The paper identifies two main possible gateways to trace illegal trade in coltan: the neighboring countries, especially Rwanda, and the importing countries for downstream production, in particular China. Our estimation is that the value of such illicit trade comes close to $ 27 million annually (2009), roughly one-fifth of the world market volume for tantalum production. With regard to any certification the paper concludes that this will become challenging for business and policy: (a) Central Africa currently is the largest supplier of coltan on the world market, many actors profit from the current situation and possess abilities to hide responsibility; (b) China will need to accept more responsibility, a first step would be the acceptance of the OECD guidelines on due diligence; (c) better regional governance in Central Africa comprises of resource taxation, a resource fund and fiscal coordination. An international task force may provide more robust data, however more research will also be needed.
Resource efficiency in production and technological innovations are inadequate for considerably reducing the current use of natural resources. Both social innovations and a complementary and equally valued strategy of sustainable consumption are required: goods must be used longer, and services that support collaborative consumption (CC) patterns must be extended. "Using rather than owning" strategies, such as product sharing, have the potential to conserve resources. Based on the results of different German studies, this article highlights the resource-saving potentials of CC patterns and recommendations proposed for policies and further research questions. The purpose of this paper is to show that a general resource-saving potential can be realized by "use rather than own" schemes, depending on the application field and the framework for implementation. CC is suitable for making a positive contribution to achieving the Factor 10 target by playing an important role in changing consumer patterns.
The paper sketches out a theoretical framework for analysing the interplay between eco-efficiency, cognition and institutions. It derives from analytical shortfalls of the prevailing literature, which features strongly engineering and business economics, by using insights from New Institutional Economics, from Cognitive Science and, partly, from Evolutionary Economics. It emphasises the role cognition and institutions play in the adoption of "green" technologies by firms. A cognitive perspective derives from recent research on simple heuristics and context-based rationality; it is proposed that those findings can serve to analyse decision-making of individual actors respectively firms and, thus, should complement economic analysis. A second proposition is that eco-efficiency and normative rules such as a Factor Four strongly rely upon institutions, i.e. the ability of institutions to evolve over time and the development of those institutions that are most appropriate to enhance technological change. In this regard, business institutions and competition are crucial, but regulatory needs remain in order to safeguard continuity of knowledge creation. The framework allows for an analysis why overall adoption of eco-efficiency still can be considered relatively slow and why some markets and firms are far ahead. As a brief case study the article reflects upon German waste law's ability to enhance eco-efficiency.
Six German scenario studies on urban passenger transport for Munich 2058, Wuppertal 2050, Eastern Ruhr Region 2030, Tuebingen 2030, Cologne 2020 and Hanover Region 2020 investigate the key question: With which strategies and on what kind of scale, is it possible to reduce the carbon dioxide emissions of urban passenger transport to accomplish the 2 °C climate protection goal with a consequently huge reduction of greenhouse gas emissions by 80% to 95% by 2050 in relation to the base year 1990? The scenarios show that the major challenge of a "climate-friendly city transport" can be achieved by appropriate measures (regarding direction and scale): in small and medium-sized cities, large cities, cities of over a million people, and metropolitan regions. The scenarios demonstrate the extent to which the considered measures contribute to the CO2 reduction, and which gap to the achievement of the goal remains if that which is currently regarded as realistic in practice is really implemented in future. Thus, they illustrate the conflict between that which is necessary for climate protection and that which is currently considered feasible in politics. The scenarios show that it is essential to act quickly and appropriately, and not hesitantly or without conviction.
This paper analyses the results of the climate conference in Lima 2014 in the light of the coming climate summit in Paris by the end of this year (COP21). The authors from the Wuppertal Institute make recommendations for the improvement of the current cooperation in the context of the climate convention and they suggest to complement the existing UN regime with a club of forerunner countries in order to provide new breath for international climate policy.
The 2011 Japanese earthquake and tsunami, and the consequent accident at the Fukushima nuclear power plant, have had consequences far beyond Japan itself. Reactions to the accident in three major economies Japan, the UK, and Germany, all of whom were committed to relatively ambitious climate change targets prior to the accident are examined. In Japan and Germany, the accident precipitated a major change of policy direction. In the UK, debate has been muted and there has been essentially no change in energy or climate change policies. The status of the energy and climate change policies in each country prior to the accident is assessed, the responses to the accident are described, and the possible impacts on their positions in the international climate negotiations are analysed. Finally, the three countries' responses are compared and some differences between them observed. Some reasons for their different policy responses are suggested and some themes, common across all countries, are identified. Policy relevance: The attraction of nuclear power has rested on the promise of low-cost electricity, low-carbon energy supply, and enhanced energy independence. The Fukushima accident, which followed the Japanese tsunami of March 2011, has prompted a critical re-appraisal of nuclear power. The responses to Fukushima are assessed for the UK, Germany, and Japan. Before the accident, all three countries considered nuclear as playing a significant part in climate mitigation strategies. Although the UK Government has continued to support nuclear new build following a prompt review of safety arrangements, Japan and Germany have decided to phase out nuclear power, albeit according to different timescales. The factors that explain the different decisions are examined, including patterns of energy demand and supply, the wider political context, institutional arrangements, and public attitudes to risk. The implications for the international climate negotiations are also assessed.
2020 was meant to be the year of climate ambition. Then the COVID-19 pandemic struck, the Glasgow conference was postponed to November 2021, and climate policy generally appeared to have been put on the backburner. But towards the end of the year prospects seemed to brighten with a series of zero-emission pledges and the election of Joe Biden as US President. This article analyses what the year of the pandemic achieved in terms of combating climate change. This article first summarizes the virtual events that were organised to substitute for the physical UNFCCC conferences and what progress was or was not made on the outstanding items of the "Paris rulebook", implementation of the Gender Action Plan, and other items. Subsequently, the article surveys the status of NDC updates and to what extent recovery programmes have been used to advance climate action. Finally, the article takes a closer look at the current dynamics among non-Party actors. In summary, while formal negotiations essentially stopped in the year of the pandemic, the conservation did not. However, implementation is still lagging far behind the ambitious targets that have been set. While implementation is mostly the domain of national policy, the international process has a number of options at its disposal to foster climate action.
As of June 2017, 150 countries have ratified the Paris Climate Agreement. This agreement calls for, among other things, strong reductions in CO2 emissions by 2030 and beyond. This paper reviews the Nationally Determined Contribution (NDCs) plans of six Association of Southeast Asian Nations (ASEAN) countries and compares their current and projected future CO2 levels across sectors, and their stated targets in the context of their economic and demographic situations. This comparison reveals wide variations in the types of targets, with the "ambition" level changing as the perspective changes from total CO2 to CO2/capita and per unit gross domestic product (GDP). We also review national plans as stated in NDCs and find that while there are many types of policies listed, few are quantified and no attempts are made to score individual or groups of policies for their likelihood in achieving stated targets. We conclude that more analysis is needed to better understand the possible impacts of current policies and plans on CO2 emissions, and whether current plans are adequate to hit targets. Considerations on better aligning targets are also provided.
Purpose - This paper sets out to tackle the issue of climate change from a business perspective. It seeks to discuss why it is important to take climate change considerations into account in business decisions, how this can be done and what further action is required from managers and business scholars.
Design/methodology/approach - The paper describes ways of reducing emissions and adapting to climate change that can be implemented by any business. As an illustration, the proposed climate strategy of a large European utility company, RWE, is provided.
Findings - There are numerous ways to reduce emissions within business operations, along the supply chain and surrounding product usage and disposal. Climate-proofing operations is also becoming increasingly pertinent to businesses.
Research limitations/implications - New ways have to be found yet in order to take emission reductions to a more ambitious level by altering patterns of production and consumption.
Practical implications - The paper discusses how businesses can reduce their carbon footprint and anticipate changes in the physical and political environment related to climate change.
Originality/value - The paper is of value to managers who, today, are expected not only to reduce emissions from operations, but also to gain an awareness of the physical, political and social risks stemming from the impacts of climate change.
The Paris Agreement marks a milestone in international climate policy. Though, the positive appraisal was not unanimous. This article will argue that the Paris Agreement embraces a new paradigm. Climate change is no longer seen as a clear-cut environmental problem, nor as a developmental issue, but as a challenge to fundamentally transform global societies. While criticism through the lens of the former paradigms is worthwhile, the Paris Agreement should be acknowledged as a pacemaker for the transformation processes that lay ahead of us.
International climate policy is one of the most fascinating issues in foreign policy, yet in recent years it has become one of the most contentious. The failure of the conference in The Hague revealed, among other things, strongunderlying rifts in the transatlantic relationship. As the self-acclaimed worldleader, the United States is not in a position to exert leadership in this vital area owing to a mixture of constitutional constraints and an ever-growing cultural dependence on fossil fuels such as oil and gas. It therefore falls to the European Union to take up this challenge. This will require careful coalition building with the rest of the world as well as confidence in the ability of Europe to develop a united position, to stick to that position and to translate the rules of the Kyoto Protocol into stringent domestic climate policy. The climate change regime is at a crossroads. At the resumed COP-6 con-ference, the Parties must decide whether to continue the process under theassumption ‘that global problems require global solutions’ or whether to turn to the more regional concept of "think globally, act locally". In either case, steering climate policy in this century on to a successful path will require the skills and dedication not only of natural scientists and technology developers, but also of those in the foreign policy community.
This paper examines the Global Climate Action Agenda (GCAA) and discusses options to improve sub- and non-state involvement in post-2020 climate governance. A framework that stimulates sub- and non-state action is a necessary complement to national governmental action, as the latter falls short of achieving low-carbon and climate-resilient development as envisaged in the Paris Agreement. Applying design principles for an ideal-type orchestration framework, we review literature and gather expert judgements to assess whether the GCAA has been collaborative, comprehensive, evaluative and catalytic. Results show that there has been greater coordination among orchestrators, for instance in the organization of events. However, mobilization efforts remain event-driven and too little effort is invested in understanding the progress of sub- and non-state action. Data collection has improved, although more sophisticated indicators are needed to evaluate climate and sustainable development impacts. Finally, the GCAA has recorded more action, but relatively little by actors in developing countries. As the world seeks to recover from the COVID-19 crisis and enters a new decade of climate action, the GCAA could make a vital contribution in challenging times by helping governments keep and enhance climate commitments; strengthening capacity for sub- and non-state action; enabling accountability; and realizing sustainable development.
Cleaner vehicles
(2016)
This review of sources has assessed existing evidence for economic benefits arising from innovations or interventions that aim to improve the environmental performance of vehicles - such as enhancements to engine and vehicle technologies or improved fuels. It is designed to support cities in their decision making and measure selection process. The article is one of 22 reviews published in this volume.
There is a growing body of scientific evidence supporting sufficiency as an inevitable strategy for mitigating climate change. Despite this, sufficiency plays a minor role in existing climate and energy policies. Following previous work on the National Energy and Climate Plans of EU countries, we conduct a similar content analysis of the recommendations made by citizen assemblies on climate change mitigation in ten European countries and the EU, and compare the results of these studies. Citizen assemblies are representative mini-publics and enjoy a high level of legitimacy.
We identify a total of 860 mitigation policy recommendations in the citizen assemblies' documents, of which 332 (39 %) include sufficiency. Most of the sufficiency policies relate to the mobility sector, the least relate to the buildings sector. Regulatory instruments are the most often proposed means for achieving sufficiency, followed by fiscal and economic instruments. The average approval rate of sufficiency policies is high (93 %), with the highest rates for regulatory policies.
Compared to National Energy and Climate Plans, the citizen assembly recommendations include a significantly higher share of sufficiency policies (factor three to six) with a stronger focus on regulatory policies. Consequently, the recommendations can be interpreted as a call for a sufficiency turn and a regulatory turn in climate mitigation politics. These results suggest that the observed lack of sufficiency in climate policy making is not due to a lack of legitimacy, but rather reflects a reluctance to implement sufficiency policies, the constitution of the policy making process and competing interests.
The construction sector is the second largest area for the application for plastics. Due to the long life times of construction products, the implementation of the circular economy faces its own challenges. To investigate this challenge, the study covers a market study for Germany, voluntary take-back and recycling schemes of construction products, as well as the use of plastic recyclates in construction products. In addition, plastic packaging of construction products is covered. Opportunities and barriers to the use of recycled plastics in construction products are derived from the intersection of available technologies, recyclate supply, and technical requirements for construction products. The report concludes with recommendations to various stakeholders on how to promote the use of recyclates in construction products and their packaging. Important points here are the introduction of a recyclate quota for films as construction product packaging and the description of recycling possibilities and recyclate content in the technical documentation of construction products.
The rising popularity and strong increase in the number of electric bicycles make it necessary to consider the built-in resources as well as possible treatments after the use phase. The time lag between the purchase and the occurrence of relevant defects suggests significant increases in defective components. Especially the great dynamics of the market due to regular innovations, product renewals, and the lack of spare parts availability for older models make the long-term use by customers much more difficult than for conventional bicycles. Therefore, it is necessary to analyze circular business models for the electric bicycle market. In this way, the required structures for a sustainable electric bicycle industry can be created so that valuable materials do not go into disposal but undergo a new use phase. Based on the results of "AddRE-Mo-Value Preservation Scenarios for Urban Electromobility of Persons and Loads through Additive Manufacturing and Remanufacturing," a research project funded by the German Federal Ministry of Education and Research, this paper addresses four circular business models, two sales models, and two service models. The guiding research interest of this paper is the combination of remanufacturing and additive manufacturing from a business model perspective, analyzing the extent to which additive remanufacturing can be considered a solution for electric bicycles' circularity. After describing the approach and methods used to develop these four circular business models the business models are described and analyzed using the Business Model Canvas. Based on this analysis, it is shown that the combination of remanufacturing and additive manufacturing can be applied to the electric bicycle market and be integrated into both sales and service models. The description of these business models will help managers design viable business models in the context of sustainable electric bicycles. It also shows that the individual partners within the value chain must collaborate more closely. In the electric bicycle industry, a single company will probably not be able to close the product cycle completely. Further research is needed to develop concepts of the business models and examine their practical feasibility in technical and organizational operations to achieve a circular economy.
Real-world laboratories (RwLs) often put researchers in highly demanding research contexts regarding their roles and self-conceptions. Helpful roles of researchers have been described but still little is known about the factors influencing the adoption of certain roles. Using data from three parallel RwLs in Wuppertal, Germany, we found four roles of researchers: the reflective scientist, the facilitator, the change agent and the (self-)reflexive scientist. We sequenced the RwLs into situations and analysed them by RwL process steps and conditions, considering the roles of researchers as outcomes. Although the conditions convey only limited explanatory power, there was a consistent picture that being pressured to carry out real-world action, having a practice partner with fewer resources and working without a functional project group is (in conjunction) sufficient to cause the researcher to partake in activities beyond conventional research. Process steps played a minor role. Our research on factors influencing the adoption of roles may help RwL researchers to perform their roles as intended.
As illustrated by the case studies of end-of-life vehicles and waste electric and electronic equipment, the approach of an extended producer responsibility is undermined by the exports of used and waste products. This fact causes severe deficits regarding circular flows, especially of critical raw materials such as platinum group metals. With regard to global recycling there seems to be a responsibility gap which leads somehow to open ends of waste flows and a loss or down-cycling of potential secondary resources. Existing product-orientated extended producer responsibility (EPR) approaches with mass-based recycling quotas do not create adequate incentives to supply waste materials containing precious metals to a high-quality recycling and should be amended by aspects of a material stewardship. The paper analyses incentive effects on EPR for the mentioned product groups and metals, resulting from existing regulations in Germany. It develops a proposal for an international covenant on metal recycling as a policy instrument for a governance-oriented framework to initiate systemic innovations along the complete value chain taking into account product group- and resource group-specific aspects on different spatial levels. It aims at the effective implementation of a central idea of EPR, the transition of a waste regime still focusing on safe disposal towards a sustainable management of resources for the complete lifecycle of products.
Causal strands for social bonds : a case study on the credibility of claims from impact reporting
(2022)
The study investigates if causal claims based on a theory-of-change approach for impact reporting are credible. The authors use their most recent impact report for a Social Bond to show how theory-based logic models can be used to map the sustainability claims of issuers to quantifiable indicators. A single project family (homeownership loans) is then used as a case study to test the underlying hypotheses of the sustainability claims. By applying Bayes Theorem, evidence for and against the claims is weighted to calculate the degree to which the belief in the claims is warranted. The authors found that only one out of three claims describe a probable cause–effect chain for social benefits from the loans. The other two claims either require more primary data to be corroborated or should be re-defined to link the intervention more closely and robustly with the overarching societal goals. However, all previous reported indicators are below the thresholds of the most conservative estimates for fractions of beneficiaries in the paper at hand. We conclude that the combination of a Theory-of-Change with a Bayesian Analysis is an effective way to test the plausibility of sustainability claims and to mitigate biases. Nevertheless, the method is - in the presented form - also too elaborate and time-consuming for impact reporting in the sustainable finance market.
On the one hand, a large number of companies have committed to achieve net zero emissions and many of them foresee to offset some remaining emissions with carbon credits, suggesting a surge of future demand. Yet, the supply side of the voluntary carbon market is struggling to align its business model with the new legal architecture of the Paris Agreement. This article juxtaposes these two perspectives. It provides an overview of the plans of 482 major companies with some form of neutrality/net zero pledge and traces the struggle on the supply side of the voluntary carbon market to come up with a viable business model that ensures environmental integrity and contributes to achieving the objectives of the Paris Agreement. Our analysis finds that if carbon credits are used to offset remaining emissions against neutrality objectives, these credits need to be accounted against the host countries' Nationally Determined Contributions (NDCs) to ensure environmental integrity. Yet, operationalizing this approach is challenging and will require innovative solutions and political support.
Key policy insights:
There is a growing mismatch between the faith placed in carbon credits by private sector companies and the continued quest for a common position of the main suppliers of the voluntary carbon market.
The voluntary carbon market has not yet found a way to align itself with the new legal architecture of the Paris Agreement in a credible and legitimate way.
Public policy support at the national and international level will be needed to operationalize a robust approach for the market’s future activities.
As investors and financial intermediaries, private banks are increasingly confronted with climate change concerns. But to what extent do banks identify as the changemakers driving climate alignment forward? To advance this question, this paper analyzes the South African banking sector with a specific focus on Standard Bank and Nedbank as exemplary case studies. Relying on the concept of "climate mainstreaming", we critically assess the banks' annual reports and compare their self-portrayal with publicly available sources on the bank's business practices, chiefly provided by non-governmental organizations and media. We find that Nedbank pushes a holistic narrative of climate change as an inevitable business opportunity. Standard Bank, in turn, relies on a "narrative of balance" between climate change and other profit-oriented investments to safeguard its stakes in the fossil industry. In so doing, this paper sheds light on greenwashing practices within disclosure specifically and the lack of binding corporate regulation more generally.
The Global Stocktake (GST) takes a central role within the architecture of the Paris Agreement, with many hoping that it will become a catalyst for increased mitigation ambition. This paper outlines four governance functions for an ideal GST: pacemaker, ensurer of accountability, driver of ambition and provider of guidance and signal. The GST can set the pace of progress by stimulating and synchronizing policy processes across governance levels. It can ensure accountability of Parties through transparency and public information sharing. Ambition can be enhanced through benchmarks for action and transformative learning. By reiterating and refining the long term visions, it can echo and amplify the guidance and signal provided by the Paris Agreement. The paper further outlines preconditions for the effective performance of these functions. Process-related conditions include: a public appraisal of inputs; a facilitative format that can develop specific recommendations; high-level endorsement to amplify the message and effectively inform national climate policy agendas; and an appropriate schedule, especially with respect to the transparency framework. Underlying information provided by Parties complemented with other (scientific) sources needs to enable benchmark setting for collective climate action, to allow for transparent assessments of the state of emissions and progress of a low-carbon transformation. The information also needs to be politically relevant and concrete enough to trigger enhancement of ambition. We conclude that meeting these conditions would enable an ideal GST and maximize its catalytic effect.
The current flow of carbon for the production, use, and waste management of polymer-based products is still mostly linear from the lithosphere to the atmosphere with rather low rates of material recycling. In view of a limited future supply of biomass, this article outlines the options to further develop carbon recycling (C-REC). The focus is on carbon dioxide (CO2) capture and use for synthesis of platform chemicals to produce polymers. CO2 may be captured from exhaust gases after combustion or fermentation of waste in order to establish a C-REC system within the technosphere. As a long-term option, an external C-REC system can be developed by capturing atmospheric CO2. A central role may be expected from renewable methane (or synthetic natural gas), which is increasingly being used for storage and transport of energy, but may also be used for renewable carbon supply for chemistry. The energy input for the C-REC processes can come from wind and solar systems, in particular, power for the production of hydrogen, which is combined with CO2 to produce various hydrocarbons. Most of the technological components for the system already exist, and, first modules for renewable fuel and polymer production systems are underway in Germany. This article outlines how the system may further develop over the medium to long term, from a piggy-back add-on flow system toward a self-carrying recycling system, which has the potential to provide the material and energy backbone of future societies. A critical bottleneck seems to be the capacity and costs of renewable energy supply, rather than the costs of carbon capture.
Addressing the prevailing mode of high-carbon lifestyles is crucial for the transition towards a net-zero carbon society. Existing studies fail to fully investigate the underlining factors of unsustainable lifestyles beyond individual determinants nor consider the gaps between current footprints and reduction targets. This study examines latent lifestyle factors related to carbon footprints and analyzes gaps between decarbonization targets and current lifestyles of major consumer segments through exploratory factor analysis and cluster analysis. As a case study on Japanese households, it estimates carbon footprints of over 47,000 households using expenditure survey microdata, and identifies high-carbon lifestyle factors and consumer segments by multivariate regression analysis, factor analysis, and cluster analysis. Income, savings, family composition, house size and type, ownership of durables and automobiles, and work style were confirmed as determinants of high-footprint Japanese households, with eight lifestyles factors, including long-distance leisure, materialistic consumption, and meat-rich diets, identified as the main contributory factors. The study revealed a five-fold difference between lowest and highest footprint segments, with all segments overshooting the 2030 and 2050 decarbonization targets. The findings imply the urgent need for policies tailored to diverse consumer segments and to address the underlying causes of high-carbon lifestyles especially of high-carbon segments.
Consumption-based CO2 emissions, which are commonly calculated by means of environmentally extended input-output analysis, are gaining wider recognition as a way to complement territorial emission inventories. Although their use has increased significantly in the last years, insufficient attention has been paid to the methodological soundness of the underlying environmental extension. This should follow the internationally agreed accounting rules of the System of Environmental-Economic Accounting, which addresses the activities undertaken by the residents of a country, independent from where these take place. Nonetheless, some footprint calculations use extensions that account for all the activities within the territory, which leads to methodological inconsistencies. Thus, this article introduces the most relevant conceptual differences between these accounting frameworks and shows the magnitude of the gap between them building on the data generated for the EXIOBASE model. It concludes that the differences are high for many countries and their magnitude is increasing over time.
German electricity giants have recently taken high-level decisions to remove selected fossil fuel operations from their company portfolio. This new corporate strategy could be seen as a direct response to the growing global influence of the fossil fuel divestment campaign. In this paper we ask whether the divestment movement currently exerts significant influence on decision-making at the top four German energy giants - E.On, RWE, Vattenfall and EnBW. We find that this is not yet the case. After describing the trajectory of the global fossil fuel divestment campaign, we outline four alternative influences on corporate strategy that, currently, are having a greater impact than the divestment movement on Germany's power sector. In time, however, clear political decisions and strong civil support may increase the significance of climate change concerns in the strategic management of the German electricity giants.
Cities around the globe are implementing innovative transport solutions as part of measures to address pertinent socio-economic and environmental challenges in urban areas and help drive the transition to low carbon development. Planning and implementing such solutions require an effective and collective approach that includes the needs and aspirations of all relevant stakeholders. In the planning and implementation of urban transport projects, capacity building components have assumed great significance but seem to be the most eluded activity for project implementers. The Living Lab concept, which allows for co-creation in innovation development, presents the opportunity to adopt innovative participatory approach in capacity building activities in transport projects; and is largely seen as a potential catalyst for rapid transformation to low carbon and sustainability transitions in cities. To this end, this paper highlights the usefulness of the Living Lab approach and provides some perspectives on how key elements of the approach are adapted in the process of assessing the capacity needs of nine (9) cities in planning and implementing e-mobility innovations. The cities are participating in an innovation research project. In the case studied, the project’s capacity needs assessment process was analyzed using an assessment framework built on four (4) key elements of the Living Lab approach, namely: extent of real-life contextualization, level of participation, diversity of stakeholders, and the time span of engagement. Insights from the assessment suggest that relevant project partners and city representatives with diverse expertise were actively involved from the onset and throughout the first 5 months of the project in defining and refining the capacity needs of partner cities based on local e-mobility conditions. This co-creative process helped determine priority areas where the need for capacity building mostly lied. Designing and operationalizing capacity building interventions tailored to the identified needs, as realized in the project, could therefore help build the necessary capacity and complement other measures aimed at developing e-mobility in the project’s partner cities.
Rising energy costs have led to increased discussion about the social impact of the energy transition in Germany in recent years. In 2021, a gradually increasing CO2 tax was introduced. This paper analyzes the question of whether a CO2 tax can be socially just. Using data analysis and desk research, correlations between income and energy consumption in Germany are shown. In a short analysis, it is investigated which additional burdens different types of private households have to expect in the coming years due to the introduction of CO2 pricing on energy. In particular, the introduction of a per capita flat rate fed by CO2 tax revenues could be a suitable way to reduce the burden on low-income households.
The availability of life cycle inventories is one of the biggest challenges for life cycle wide environmental assessment. There are several life cycle assessment (LCA) databases providing inventory data as well as resource and emission profiles of processes for impact assessment methods like ReCiPe or IMPACT 2002+. But the use of these LCA databases for input oriented environmental assessment is very limited as they cover only a part of all relevant input flows. The paper describes current challenges when calculating the input oriented Material Input per Service Unit (MIPS) indicators based on LCA inventory data from the Ecoinvent database. Propositions are made how to address these challenges. As a conclusion, further need of research to reach a full compatibility of LCA databases and the MIPS concept is pointed out.
Calculating MIPS 2.0
(2013)
The Wuppertal Institute developed, in the early 1990s, an input-oriented lifecycle-wide resource accounting method, the "Material Input per Service-Unit" concept (MIPS), today also referred to as "Material Footprint". The official handbook applicable to products, services, and processes describes a MS Excel-based sequential approach for calculating MIPS. Today's computing power, available to every researcher, and access to software and databases dedicated to lifecycle analysis make calculating MIPS using matrix inversion possible. This also opens up possibilities for enhancing MIPS-models programmatically: parameterizing the foreground and background systems, batch modeling for producing time series, and computational algorithms enhancing interpretation. The article provides (1) an overview of the methods and tools used for calculating MIPS from its origins to today, and (2) demonstrates some of the programmatically enhanced capabilities offered to MIPS-practitioners.
In Germany, the number of renewable energy prosumers has increased rapidly since 2000. However, the development of prosumers has faced and will continue to face various economic, social, and technological challenges, which have triggered the emergence of a number of innovative business models (BM). This paper enriches the empirical basis for prosumer-oriented BMs by investigating two BM innovations in Germany (P2P electricity trading and aggregation of small-size prosumers) drawing on business model and socio-technical transition theories. A mix of qualitative data collection methods, including document analysis and semi-structured expert interviews, was applied. We found that while both BMs can potentially address the challenges associated with renewable energy prosumer development in Germany, small-scale prosumers’ participation in both BMs has been limited so far. We identified various internal and external drivers and barriers for scaling up these BMs for prosumer development in Germany. Despite these barriers, both aggregation and centralized P2P targeting prosumers may potentially be also taken up by incumbent market actors such as utilities. Decentralized P2P on the other hand still faces significant internal and external barriers for upscaling. Based on the analysis, the paper provides policy recommendations with respect to the identified drivers and barriers. From a theoretical perspective, our findings provide further evidence to challenge the dichotomous understanding of niche actors and incumbents, the latter of which are often theorized to be resistant to radical innovations.
Nigeria is Africa's top cement producer and could be on course to be one of the top producers globally. The goal of this study is to identify and critically examine the pathways available to Nigeria to meet its decarbonisation goals in the cement sector. Based on a literature review, the study assesses demand drivers and decarbonisation potentials for the sector. It then presents two different quantitative pathways for growth in production of cement by 2050, and three different pathways for decarbonisation of the sector. Using published data and a scenario analysis tool, the study calculates how the sector's emissions might evolve under each of these pathways. The results indicate that, in the most ambitious scenario, emissions from the sector can plateau by the late 2030s, resulting in an overall increase of 21% by 2050 (compared to 2015 levels). Achieving this scenario is necessary in order to put the sector on a path to net zero emissions beyond 2050. The scenario is driven by reductions in both energy-related and process emissions, as well as a small share of carbon capture and storage and demand management. A moderately ambitious scenario that relies mostly on savings on energy-related emissions results in an 84% increase in emissions by 2050. Finally, the Business-as-Usual scenario results in an almost tripling of emissions by 2050. The results indicate a strong potential for policies to drive improvements in energy efficiency and clinker-to-cement ratio. Critical areas of uncertainty within the assumptions include the production rates (including the evolution of the export market) and the fuel mix.
The COVID-19 pandemic has affected human mobility via lockdowns, social distancing rules, home quarantines, and the full or partial suspension of transportation. Evidence-based policy recommendations are urgently needed to ensure that transport systems have resilience to future pandemic outbreaks, particularly within Global South megacities where demand for public transport is high and reduced access can exacerbate socio-economic inequalities. This study focuses on Metro Manila - a characteristic megacity that experienced one of the most stringent lockdowns worldwide. It analyzes aggregated cell phone and GPS data from Google and Apple that provide a comprehensive representation of mobility behavior before and during the lockdown. While significant decreases are observed for all transport modes, public transport experienced the largest drop (-74.5 %, on average). The study demonstrates that: (i) those most reliant on public transport were disproportionately affected by lockdowns; (ii) public transport was unable to fulfil its role as public service; and, (iii) this drove a paradigm shift towards active mobility. Moving forwards, in the short-term policymakers must promote active mobility and prioritize public transport to reduce unequal access to transport. Longer-term, policymakers must leverage the increased active transport to encourage modal shift via infrastructure investment, and better utilize big data to support decision-making.
Sufficiency measures are potentially decisive for the decarbonisation of energy systems but rarely considered in energy policy and modelling. Just as efficiency and renewable energies, the diffusion of demand-side solutions to climate change also relies on policy-making. Our extensive literature review of European and national sufficiency policies fills a gap in existing databases. We present almost 300 policy instruments clustered into relevant categories and publish them as "Energy Sufficiency Policy Database". This paper provides a description of the data clustering, the set-up of the database and an analysis of the policy instruments. A key insight is that sufficiency policy includes much more than bans of products or information tools leaving the responsibility to individuals. It is a comprehensive instrument mix of all policy types, not only enabling sufficiency action, but also reducing currently existing barriers. A policy database can serve as a good starting point for policy recommendations and modelling, further research is needed on barriers and demand-reduction potentials of sufficiency policy instruments.
Building a "theory of sustainable development" : two salient conceptions within the German discourse
(2008)
This paper identifies a lack in sustainability science, of a well-founded normative basis, for the justification of sustainable development. In order to fill this gap, we aim at calling attention to two of the salient conceptions in the German discourse, namely the "Theory of Strong Sustainability" developed at the University of Greifswald and the "Integrative Sustainability Concept" proposed by the Helmholtz Association of German Research Centres (HGF), the biggest research institution in Germany. Both conceptions highly value the justification of a strong theoretical and normative core of sustainable development. This paper suggests that a well-founded "theory of sustainable development" provides the distinctiveness that allows the assessment whether or not there is progress towards sustainability. A clear scientific comprehension of sustainability may inform politics in sustainability affairs and function as a rational corrective for the otherwise diffuse discussion in the general public.
Policy evaluation is widely considered important for assessing policies for effectiveness and impact. Municipalities are among the political actors implementing energy and climate policy. Yet, few municipalities have introduced adequate instruments to monitor the effectiveness of their actions. Often, municipal actors consider local greenhouse gas (GHG) inventories to be sufficient to monitor the impact of their actions. This paper points out why the expectations placed on local GHG inventories as a monitoring instrument can rarely be met in practice. On the basis of German examples, it shall be shown that a thorough calculation of actual local energy and GHG reductions attributable to local efforts is often only partially possible, and is complicated by external factors. A supplementary approach to the top-down method is to evaluate local programmes from the bottom-up. This paper discusses efforts to develop an instrument for a bottom-up monitoring of the city of Hamburg's Climate Action Plan.
Only three days after the beginning of the nuclear catastrophe in Fukushima, Japan, on 11 March 2011, the German government ordered 8 of the country's 17 existing nuclear power plants (NPPs) to stop operating within a few days. In summer 2011 the government put forward a law - passed in parliament by a large majority - that calls for a complete nuclear phase-out by the end of 2022. These government actions were in contrast to its initial plans, laid out in fall 2010, to expand the lifetimes of the country's NPPs.
The immediate closure of 8 NPPs and the plans for a complete nuclear phase-out within little more than a decade, raised concerns about Germany's ability to secure a stable supply of electricity. Some observers feared power supply shortages, increasing CO2-emissions and a need for Germany to become a net importer of electricity.
Now - a little more than a year after the phase-out law entered into force - this paper examines these concerns using (a) recent statistical data on electricity production and demand in the first 15 months after the German government's immediate reaction to the Fukushima accident and (b) reviews the most recent projections and scenarios by different stakeholders on how the German electricity system may develop until 2025, when NPPs will no longer be in operation.
The paper finds that Germany has a realistic chance of fully replacing nuclear power with additional renewable electricity generation on an annual basis by 2025 or earlier, provided that several related challenges, e.g. expansion of the grids and provision of balancing power, can be solved successfully. Already in 2012 additional electricity generation from renewable energy sources in combination with a reduced domestic demand for electricity will likely fully compensate for the reduced power generation from the NPPs shut down in March 2011.
If current political targets will be realised, Germany neither has to become a net electricity importer, nor will be unable to gradually reduce fossil fuel generated electricity. Whether the reduction in fossil fuel use will be sufficient to adequately contribute to national greenhouse gas mitigation targets significantly depends on an active policy to promote electricity savings, continuous efforts to increase the use of renewables and a higher share of natural gas (preferably used in combined heat and power plants) in fossil fuel power generation.
This article enriches the existing literature on the importance and role of the social sciences and humanities (SSH) in renewable energy sources research by providing a novel approach to instigating the future research agenda in this field. Employing a series of in-depth interviews, deliberative focus group workshops and a systematic horizon scanning process, which utilised the expert knowledge of 85 researchers from the field with diverse disciplinary backgrounds and expertise, the paper develops a set of 100 priority questions for future research within SSH scholarship on renewable energy sources. These questions were aggregated into four main directions: (i) deep transformations and connections to the broader economic system (i.e. radical ways of (re)arranging socio-technical, political and economic relations), (ii) cultural and geographical diversity (i.e. contextual cultural, historical, political and socio-economic factors influencing citizen support for energy transitions), (iii) complexifying energy governance (i.e. understanding energy systems from a systems dynamics perspective) and (iv) shifting from instrumental acceptance to value-based objectives (i.e. public support for energy transitions as a normative notion linked to trust-building and citizen engagement). While this agenda is not intended to be—and cannot be—exhaustive or exclusive, we argue that it advances the understanding of SSH research on renewable energy sources and may have important value in the prioritisation of SSH themes needed to enrich dialogues between policymakers, funding institutions and researchers. SSH scholarship should not be treated as instrumental to other research on renewable energy but as intrinsic and of the same hierarchical importance.
Dominant agricultural and food systems lead to continuous resource depletion and unacceptable environmental and social impacts. While current calls for changing agrifood systems are increasingly framed in the context of sustainability transitions, they rarely make an explicit link to transition studies to address these systemic challenges, nor do transition scholars sufficiently address agri-food systems, despite their global pertinence. From this viewpoint, we illustrate several gaps in the agri-food systems debate that sustainability transition studies could engage in. We propose four avenues for research in the next decade of transition research on agri-food systems: 1) Crossscale dynamics between coupled systems; 2) Social justice, equity and inclusion; 3) Sustainability transitions in low- and middle-income countries; 4) Cross-sectoral governance and system integration. We call for a decade of new transition research that moves beyond single-scale and sector perspectives toward more inclusive and integrated analyses of food system dynamics.
The German government aims to achieve virtually climate-neutral building stock by 2050 to tackle climate change. To realise this goal, comprehensive policy packages based on neoclassical economic theory are in place to foster energy efficiency investment. However, in the building sector, there is increasingly a gap between this aspiration and the reality. It is claimed that one of the main reasons for this is that the existing policy framework fails to address the specific characteristics and needs of different groups of building owners. This is a particular challenge in Germany, where 80% of all dwellings are owned privately and 37% are rented out by small private landlords (SPL). Despite the significant numbers of SPL, they often follow black box decision-making processes when considering energy renovations. In this study, the author uses an explanatory model to understand the decision-making processes of SPL, combining theoretical aspects from different research disciplines. This model was applied to a low-demand housing market in a neighbourhood in the Ruhr area. Eighteen semi-structured interviews (each lasting between 37 and 115 min) were conducted, demonstrating that in addition to economic factors, the values, beliefs, norms and routines of SPL - as well as their personal capabilities and contextual factors - play an important role in their decision-making. Based on the findings, recommendations are made for enhancing the effectiveness of existing energy efficiency policies and other supporting instruments (e.g. tenancy law and social legislation), tailored to the specific needs of SPL.
Consumption of natural resources should not exceed sustainable levels. The increasing use of biofuels and to some extent biomaterials, on top of rising food and feed demands, is causing countries to use a growing amount of global land, which may lead to land use conflicts and the expansion of cropland and intensive cultivation at the expense of natural ecosystems. Selective product certification cannot control the land use change triggered by growing overall biomass consumption. We propose a comprehensive approach to account for the global land use of countries for their domestic consumption, and assess this level with regard to globally acceptable levels of resource use, based on the concept of safe operating space. It is shown that the European Union currently uses one-third more cropland than globally available on a per capita basis and that with constant consumption levels it would exceed its fair share of acceptable resource use in 2030. As the use of global forests to meet renewable energy targets is becoming a concern, an approach to account for sustainable levels of timber flows is also proposed, based on the use of net annual increment, exemplified with preliminary data for Switzerland. Altogether, our approach would integrate the concept of sustainable consumption into national resource management plans; offering a conceptual basis and concrete reference values for informed policy making and urging countries to monitor and adjust their levels of resource consumption in a comprehensive way, respectful of the limits of sustainable supply.
The paper presents the results of an ex-ante evaluation of the economy-wide benefits that may be achieved through the implementation of the 20-year Energy Efficiency Action Plan (EEAP) in Thailand. The objective of the EEAP is to reduce energy intensity by 25 % in 2030 compared to 2010. This is to be reached by reducing the projected energy consumption by 20 % or 38 Mtoe until 2030. We have specified an analytical framework, which allows for a calculation of the overall energy cost savings, energy import cost reductions and reduced CO2 emissions. Moreover, we calculated the induced energy efficiency investments, employment effects and impacts on governmental budget. The evaluation shows that an effective implementation of the plan may lead to a reduction in energy expenditure of 37.7 billion EUR by 2030. Moreover, the EEAP-induced energy savings will significantly reduce the greenhouse gas emissions as well as Thailand’s energy import costs and generate private investment in energy efficiency of about 5 billion EUR annually in 2030, which in turn may lead to about 300,000 new jobs. The size of the net impact of the plan on Thailand’s governmental budget is uncertain due to positive and negative effects on corporate and income tax revenues, expenses for unemployment benefits, governmental energy consumption, expenses for energy subsidies and energy tax income.
It has been widely recognized that there is an urgent need for more sustainable urban transport policy and planning. To understand ambitious policy approaches, "relatively successful" cities are regularly subject of analyses. This paper also focuses on relatively successful cities - by reviewing the application documents of the winner cities of the European Green Capital Award (EGCA). Award schemes not only aim to reward leading participants, but likewise aim to contribute to knowledge transfer and the dissemination of good practice examples to non-participants. So far award schemes and good practice approaches have received limited attention by research. This paper reviews and analyses the application forms of the EGCA winning cities to learn about ambitious policy approaches to sustainable and climate-friendly urban transport.
There are a variety of economic and ecological benefits to increased resource efficiency. Social, institutional and technical innovations can all contribute towards efficiency increases. Companies face different hurdles in fostering such innovation. Small and medium-sized companies are subject to specific constraints that may prevent them from benefiting from innovation-induced resource efficiency improvements. Qualitative interviews were conducted among German small and medium-sized enterprises (SMEs) and intermediaries to identify barriers for resource efficiency innovations and to elaborate a policy mix at the federal level that could help SMEs to overcome these. We found five major barriers to resource efficiency innovations in German SMEs, comprising deficits in innovation culture, inter-firm cooperation along the value chain, finance, awareness and take-up of government funds. We propose a distinct policy mix as a response to this situation. The policy mix comprises the interlocking and synergistic elements of government funding schemes, innovation agents and innovation laboratories.
Demand-side mitigation strategies have been gaining momentum in climate change mitigation research. Still, the impact of different approaches in passenger transport, one of the largest energy demand sectors, remains unclear. We couple a transport simulation model to an energy system optimisation model, both highly disintegrated in order to compare those impacts. Our scenarios are created for the case of Germany in an interdisciplinary, qualitative-quantitative research design, going beyond techno-economic assumptions, and cover Avoid, Shift, and Improve strategies, as well as their combination. The results show that sufficiency - Avoid and Shift strategies - have the same impact as the improvement of propulsion technologies (i.e. efficiency), which is reduction of generation capacities by one quarter. This lowers energy system transformation cost accordingly, but requires different kinds of investments: Sufficiency measures require public investment for high-quality public services, while efficiency measures require individuals to purchase more expensive vehicles at their own cost. These results raise socio-political questions of system design and well-being. However, all strategies are required to unleash the full potential of climate change mitigation.
In the face of growing popularity of eco-feedback innovations, recent studies draw attention to the relevance of the human factor for a more effective design of eco-feedback. This paper explores these challenges more deeply by employing a mixed methods approach. We provide in-situ insights from a Living Lab experiment on the effect of smart home systems and traffic light feedback on heating energy consumption in private households. Our results from an interrupted time series analysis of logged data on indoor room temperature, CO2 concentration and consumption of natural gas show that the interventions do not affect heating as expected, neither for automating behaviour via high-tech smart home systems nor via low-tech traffic light feedback. Smart home systems do not promise a significant reduction of heating energy consumption and a traffic light feedback on indoor air quality does not lead to a reaction of indoor CO2 concentrations, but may reduce heating energy consumption. Qualitative interviews on heating practices of participants suggests that comfort temperatures, lack of competences and inert heating systems do override expected effects of the feedback interventions. We propose that high-tech smart home systems should carefully consider the handling competences of users. Low-tech feedback products on the other hand should by design stronger address user experience factors like comfort temperatures.
Simulation modeling is useful to understand the mechanisms of the diffusion of innovations, which can be used for forecasting the future of innovations. This study aims to make the identification of such mechanisms less costly in time and labor. We present an approach that automates the generation of diffusion models by: (1) preprocessing of empirical data on the diffusion of a specific innovation, taken out by the user; (2) testing variations of agent-based models for their capability of explaining the data; (3) assessing interventions for their potential to influence the spreading of the innovation. We present a working software implementation of this procedure and apply it to the diffusion of water-saving showerheads. The presented procedure successfully generated simulation models that explained diffusion data. This progresses agent-based modeling methodologically by enabling detailed modeling at relative simplicity for users. This widens the circle of persons that can use simulation to shape innovation.
Power-law city-size distributions are a statistical regularity researched in many countries and urban systems. In this history of science treatise we reconsider Felix Auerbach’s paper published in 1913. We reviewed his analysis and found (i) that a constant absolute concentration, as introduced by him, is equivalent to a power-law distribution with exponent ≈1, (ii) that Auerbach describes this equivalence, and (iii) that Auerbach also pioneered the empirical analysis of city-size distributions across countries, regions, and time periods. We further investigate his legacy as reflected in citations and find that important follow-up work, e.g. by Lotka (Elements of physical biology. Williams & Wilkins Company, Baltimore, 1925) and Zipf (Human behavior and the principle of least effort: an introduction to human ecology, Martino Publishing, Manfield Centre, CT (2012), 1949), does give proper reference to his discovery - but others do not. For example, only approximately 20% of city-related works citing Zipf (1949) also cite Auerbach (Petermanns Geogr Mitteilungen 59(74):74–76, 1913). To our best knowledge, Lotka (1925) was the first to describe the power-law rank-size rule as it is analyzed today. Saibante (Metron Rivista Internazionale di Statistica 7(2):53–99, 1928), building on Auerbach and Lotka, investigated the power-law rank-size rule across countries, regions, and time periods. Zipf's achievement was to embed these findings in his monumental 1949 book. We suggest that the use of “Auerbach–Lotka–Zipf law” (or "ALZ-law") is more appropriate than "Zipf's law for cities", which also avoids confusion with Zipf’s law for word frequency. We end the treatise with biographical notes on Auerbach.
This study analyzes the usefulness of an attitude-based target group approach in predicting the ecological impact of mobility behavior. Based on a survey of 1,991 inhabitants of three large German cities, constructs derived from an expanded version of the Theory of Planned Behavior were used to identify distinct attitude-based target groups. Five groups were identified, each representing a unique combination of attitudes, norms, and values. The groups differed significantly from each other with regard to travel-mode choice, distances traveled, and ecological impact. In comparison with segmentations based on sociodemographic and geographic factors, the predictive power of the attitude-based approach was higher, especially with regard to the use of private motorized modes of transportation. The opportunities and limits of reducing the ecological impact of mobility behavior on the basis of an attitude-based target group approach are discussed.
The need for sustainable energy management at the municipal level is growing, in order to meet EU climate goals. Multiple initiatives have been launched to support municipalities in energy planning and strategy development process. Despite available support, research shows mixed results about implementation of plans and strategies. This research paper analyses what targets municipalities set, how they monitor implementation of their sustainable energy action plans (SEAPs) and searches for the most important factors that have enabled or hindered the implementation of local SEAPs at Latvia. The article shows that, in some cases, there is evidence that SEAP development is a project-based activity, supported by external experts. From municipal personnel point of view, it is a project that ends with approved SEAP, but not a part of their future daily routine. Eventually implementation of the plan is difficult, because municipalities lack experience in daily management of energy data, distribution of responsibilities and implementation of procedures. Municipalities also tend to exclude important stakeholders in their SEAPs, like, private sector, household sector and transport sector, which lead to lower targets and lower achievements in GHG reduction.
The growing demand for wood to meet EU renewable energy targets has increasingly come under scrutiny for potentially increasing EU import dependence and inducing land use change abroad, with associated impacts on the climate and biodiversity. This article builds on research accounting for levels of primary timber consumption - e.g., toward forest footprints - and developing reference values for benchmarking sustainability - e.g., toward land use targets - in order to improve systemic monitoring of timber and forest use. Specifically, it looks at future trends to assess how current EU policy may impact forests at an EU and global scale. Future demand scenarios are based on projections derived and adapted from the literature to depict developments under different scenario assumptions. Results reveal that by 2030, EU consumption levels on a per capita basis are estimated to be increasingly disproportionate compared to the rest of the world. EU consumption scenarios based on meeting around a 40% share of the EU renewable energy targets with timber would overshoot both the EU and global reference value range for sustainable supply capacities in 2030. Overall, findings support literature pointing to an increased risk of problem shifting relating to both how much and where timber needed for meeting renewable energy targets is sourced. It is argued that a sustainable level of timber consumption should be characterized by balance between supply (what the forest can provide on a sustainable basis) and demand (how much is used on a per capita basis, considering the concept of fair shares). To this end, future research should close data gaps, increase methodological robustness and address the socio-political legitimacy of the safe operating space concept towards targets in the future. A re-use of timber within the economy should be supported to increase supply options.
The German government has set itself the target of reducing the country's GHG emissions by between 80 and 95% by 2050 compared to 1990 levels. Alongside energy efficiency, renewable energy sources are set to play the main role in this transition. However, the large-scale deployment of renewable energies is expected to cause increased demand for critical mineral resources. The aim of this article is therefore to determine whether the transformation of the German energy system by 2050 ("Energiewende") may possibly be restricted by a lack of critical minerals, focusing primarily on the power sector (generating, transporting and storing electricity from renewable sources). For the relevant technologies, we create roadmaps describing a number of conceivable quantitative market developments in Germany. Estimating the current and future specific material demand of the options selected and projecting them along a range of long-term energy scenarios allows us to assess potential medium- or long-term mineral resource restrictions. The main conclusion we draw is that the shift towards an energy system based on renewable sources that is currently being pursued is principally compatible with the geological availability and supply of mineral resources. In fact, we identified certain sub-technologies as being critical with regard to potential supply risks, owing to dependencies on a small number of supplier countries and competing uses. These sub-technologies are certain wind power plants requiring neodymium and dysprosium, thin-film CIGS photovoltaic cells using indium and selenium, and large-scale redox flow batteries using vanadium. However, non-critical alternatives to these technologies do indeed exist. The likelihood of supplies being restricted can be decreased further by cooperating even more closely with companies in the supplier countries and their governments, and by establishing greater resource efficiency and recyclability as key elements of technology development.
Assessing the natural resource use and the resource efficiency potential of the Desertec concept
(2013)
Considering global warming, increasing commodity prices, and the dramatic consequences of the over-exploitation and overuse of resources, a transition to a renewable energy supply is necessary. This requires an (resource) efficient and renewable supply of operating reserve. In this article, a possible solution to this problem is analysed: the Desertec concept. It is meant to convert solar energy in areas with high solar irradiation into electrical energy by means of Concentrated Solar Power (CSP) transferring this energy by High Voltage Direct Current (HVDC) lines into the whole European Union Middle East and North Africa (EU-MENA) area. In order to assess the resource efficiency potential of Desertec, three different kinds of CSP plants (parabolic trough, Fresnel collector and central receiver of the building classes Inditep, Novatec and Solar Tres) including heat storage systems (Molten Salt and Phase-Changing-Material) and the necessary HVDC are analysed using the Material Input per Service Unit (MIPS) methodology. The assessment is accomplished for three different locations (Morocco, Tunisia and Egypt) and two points of time (2025 and 2050). With these results, a scenario of electricity supply in Germany in 2050 with a 20% share of solar power import is calculated. Central receivers are the most resource efficient ones: their consumption of abiotic materials is only half of parabolic trough plants and two thirds of Fresnel trough plants. Water and air consumption is the lowest of all analyzed CSP plants as well. The scenario for Germany's fuel mix in 2050 shows that a predominantly renewable fuel mix reduces the consumption of abiotic materials by 75%, of water by 60% and of air by 45%. Only the consumption of biotic materials rises due to the higher share of biomass conversion.
Agriculture is an economic sector with massive impact on biodiversity and agrobiodiversity. Sustainable diets represent a critical policy leverage and a realistic opportunity to reduce the environmental impact of the agro-food sector while improving human health at the same time. Eating out is an increasingly common habit for many consumers and, by offering sustainable dishes, catering companies can play a central role. To do this, they need to understand and correctly assess the sustainability of their food portfolio, but assessment tools are not well established yet. The NAHGAST project, of which this study was part, developed and tested a sustainability assessment tool for catering companies based on concrete targets defined per meal. This study addresses the lack of methods to evaluate the impact of food on biodiversity, with a particular focus on agrobiodiversity. The work illustrates a context-specific application of an enhanced DPSIR model to structure information and select indicators, and proposes a transdisciplinary use of existing metrics. Further research is needed in order to define scientifically sound target values or sustainability ranges for each indicator per meal, in order to calculate them. Strengths and limits of the study are discussed.
Tackling fuel poverty has become an increasingly important issue on many European countries' political agendas. Consequently, national governments, local authorities and NGOs have established policies and programmes to reduce the fuel poverty vulnerability of households. However, evaluations of such policies and programmes show that they barely reach those who are most in need. The reasons for this failure are diverse and include fuel poverty measurement metrics, local scale data availability and policy design. This raises the question of how fuel poor homes can be more effectively identified and targeted to ensure that limited local and national budgets are used to benefit those who most need help.
Area-based approaches, which pinpoint spatial units highly affected by fuel poverty due to their specific characteristics, offer an opportunity for creating more tailored policies and programmes. In this study, the author developed a GIS-MCDA (Multi-Criteria Decision Analysis), using an AHP (Analytical Hierarchy Process) and applied the approach to the German city of Oberhausen. The overall issue of fuel poverty was broken down into three vulnerability dimensions (heating burden, socio-economic and building vulnerability), the relative importance of fuel poverty criteria and the dimensions were evaluated by experts, and an overall Fuel Poverty Index was created to assess the relative fuel poverty vulnerability of 168 urban neighbourhoods.
The analysis offers insights into the spatial pattern of fuel poverty within a city and thus provides an opportunity to channel efforts towards households in those neighbourhoods most in need. It also demonstrates that a trade-off between ecological and social targets should be considered in the development of future policies for tackling fuel poverty.
Artificial intelligence in the sorting of municipal waste as an enabler of the circular economy
(2021)
The recently finalized research project "ZRR for municipal waste" aimed at testing and evaluating the automation of municipal waste sorting plants by supplementing or replacing manual sorting, with sorting by a robot with artificial intelligence (ZRR). The objectives were to increase the current recycling rates and the purity of the recovered materials; to collect additional materials from the current rejected flows; and to improve the working conditions of the workers, who could then concentrate on, among other things, the maintenance of the robots. Based on the empirical results of the project, this paper presents the main results of the training and operation of the robotic sorting system based on artificial intelligence, which, to our knowledge, is the first attempt at an application for the separation of bulky municipal solid waste (MSW) and an installation in a full-scale waste treatment plant. The key questions for the research project included (a) the design of test protocols to assess the quality of the sorting process and (b) the evaluation of the performance quality in the first six months of the training of the underlying artificial intelligence and its database.
To address climate change, the decarbonisation of Germany's existing building stock urgently needs to be prioritised. However, the rate and depth of refurbishment has lagged behind official targets for years. This is a particular problem in the rental sector, where the costs and benefits of energy efficiency measures tend to be unevenly distributed between landlords and tenants (the so-called "landlord-tenant dilemma"). Within the context of the current policy landscape, investments in energy efficiency consequently make most sense for landlords if the upfront costs can be refinanced via increased rental income or reduced vacant periods. This paper seeks to investigate the validity of this statement at city level by using a large dataset from one of Germany’s main internet property platforms to examine how the willingness of tenants to pay for energy efficiency varies across residential locations in the city of Wuppertal.
The small-scale spatial analysis highlights the existence of a price premium for energy efficiency in the rental market for apartments; however, this premium is generally small (especially in comparison to other property enhancements, especially visible improvements) or even non-existent in some residential areas. Consequently, investing in energy efficiency is rarely an attractive option for landlords. Therefore, strong policy action, aligned with social and urban development policy objectives, is necessary to establish an effective incentive structure in the market and make investing in energy efficiency more attractive for both landlords and tenants.
Energy Efficiency First (EEF) is an established principle for European Union (EU) energy policy design. It highlights the exploitation of demand-side resources and prioritizes cost-effective options from the demand-side over other options from a societal cost-benefit perspective. However, the involvement of multiple decision-makers makes it difficult to implement. Therefore, we propose a flexible decision-tree framework for applying the EEF principle based on a review of relevant areas and examples. In summary, this paper contributes to applying the EEF principle by defining and distinguishing different types of cases - (1) policy-making, and (2) system planning and investment - identifying the most common elements, and proposing a decision-tree framework that can be flexibly constructed based on the elements for different cases. Finally, we exemplify the application of this framework with two example cases: (1) planning for demand-response in the power sector, and (2) planning for a district heating system.
The European Commission has established the Eco Management and Auditing Scheme (EMAS) to promote and institutionalize corporate environmental management and environmental audits. This article summarizes a study primarily concerned with the execution of an ecoaudit in a medium-sized furniture enterprise according to the rules of EMAS. Material flow accounting was used to assess and analyze the "gate-to-gate" and "cradle-to-grave" environmental impacts related to the firm's products and activities. A resource management strategy was developed that permits the determination of methods for firm-specific material flow management, product management, and ecological product design to improve environmental performance as seen from the vantage point of resource efficiency.
The enhanced use of biomass for the production of energy, fuels, and materials is one of the key strategies towards sustainable production and consumption. Various life cycle assessment (LCA) studies demonstrate the great potential of bio-based products to reduce both the consumption of non-renewable energy resources and greenhouse gas emissions. However, the production of biomass requires agricultural land and is often associated with adverse environmental effects such as eutrophication of surface and ground water. Decision making in favor of or against bio-based and conventional fossil product alternatives therefore often requires weighing of environmental impacts. In this article, we apply distance-to-target weighing methodology to aggregate LCA results obtained in four different environmental impact categories (i.e., non-renewable energy consumption, global warming potential, eutrophication potential, and acidification potential) to one environmental index. We include 45 bio- and fossil-based product pairs in our analysis, which we conduct for Germany. The resulting environmental indices for all product pairs analyzed range from -19.7 to +0.2 with negative values indicating overall environmental benefits of bio-based products. Except for three options of packaging materials made from wheat and cornstarch, all bio-based products (including energy, fuels, and materials) score better than their fossil counterparts. Comparing the median values for the three options of biomass utilization reveals that bio-energy (-1.2) and bio-materials (-1.0) offer significantly higher environmental benefits than bio-fuels (-0.3). The results of this study reflect, however, subjective value judgments due to the weighing methodology applied. Given the uncertainties and controversies associated not only with distance-to-target methodologies in particular but also with weighing approaches in general, the authors strongly recommend using weighing for decision finding only as a supplementary tool separately from standardized LCA methodology.
The article estimates the natural resource consumption due to nutrition from the supply and demand sides. Using the MIPS (Material Input per Service Unit) methodology, we analyzed the use of natural resources along the supply chains of three Italian foodstuffs: wheat, rice and orange-based products. These figures were then applied for evaluating the sustainability of diets in 13 European countries. The results outline which phases in food production are more natural resource demanding than others. We also observed different levels of sustainability in the European diets and the effect of different foodstuffs in the materials, water and air consumption.
The multi-level perspective has successfully been applied to the analysis of complex sector transitions in the energy, the health or the food production sector. Is this framework also helpful to understand and give prescriptive advice for sustainability transformations within a national science system? Based on a comprehensive study of the diffusion of transdisciplinary sustainability research in Germany, this article analyzes the institutional dimension of a changing science-society relation in the German science system. It uses the multi-level perspective as a fruitful heuristic in order to identify potential pathways for a broader diffusion of transdisciplinary sustainability science. The importance of niche coalitions of frontrunner universities and research institutes are highlighted.
The objective of analytical strategic environmental assessment (ANSEA) is to provide a decision-centred approach to the SEA process. The ANSEA project evolved from the realisation that, in many cases, SEA, as currently practised, is not able to ensure an appropriate integration of environmental values. The focus of SEA is on predicting impacts, but the tool takes no account of the decision-making processes it is trying to influence. At strategic decision-making levels, in turn, it is often difficult to predict impacts with the necessary exactitude. The decision-making sciences could teach some valuable lessons here. Instead of focusing on the quantitative prediction of environmental consequences, the ANSEA approach concentrates on the integration of environmental objectives into decision-making processes. Thus, the ANSEA approach provides a framework for analysing and assessing the decision-making processes of policies, plans and programmes (PPP). To enhance environmental integration into the decision-making process, decision windows (DW) can be identified. The approach is designed to be objective and transparent to ensure that environmental considerations are taken into account, or - from an ex-post perspective - to allow an evaluation of how far environmental considerations have been integrated into the decision-making process under assessment. The paper describes the concepts and the framework of the ANSEA approach and discusses its relation to SEA and the EC Directive.
The current momentum in the electrification of the car fuels hope for a transition in mobility. However, electric vehicles have failed before and it is thus asked: What is the potential of e-mobility developing as a sustainable system innovation? In order to deal with this challenge analytically, a theoretical framework is developed: the concepts of transformative capacity of a new technology (do electric vehicles trigger "social" innovations, e.g. new business models or use patterns?) and system adaptability (how stable is the mobility regime?) are introduced and the issue of sustainability is discussed. This framework will be explored for the German innovation system for e-mobility. It can be shown that electric cars will only be successful when part of a system innovation and that the German innovation system is dominated by regime actors and thus potentially used as a way to fend off more substantial change.
Direct air capture (DAC) combined with subsequent storage (DACCS) is discussed as one promising carbon dioxide removal option. The aim of this paper is to analyse and comparatively classify the resource consumption (land use, renewable energy and water) and costs of possible DAC implementation pathways for Germany. The paths are based on a selected, existing climate neutrality scenario that requires the removal of 20 Mt of carbon dioxide (CO2) per year by DACCS from 2045. The analysis focuses on the so-called "low-temperature" DAC process, which might be more advantageous for Germany than the "high-temperature" one. In four case studies, we examine potential sites in northern, central and southern Germany, thereby using the most suitable renewable energies for electricity and heat generation. We show that the deployment of DAC results in large-scale land use and high energy needs. The land use in the range of 167-353 km2 results mainly from the area required for renewable energy generation. The total electrical energy demand of 14.4 TWh per year, of which 46% is needed to operate heat pumps to supply the heat demand of the DAC process, corresponds to around 1.4% of Germany's envisaged electricity demand in 2045. 20 Mt of water are provided yearly, corresponding to 40% of the city of Cologne's water demand (1.1 million inhabitants). The capture of CO2 (DAC) incurs levelised costs of 125-138 EUR per tonne of CO2, whereby the provision of the required energy via photovoltaics in southern Germany represents the lowest value of the four case studies. This does not include the costs associated with balancing its volatility. Taking into account transporting the CO2 via pipeline to the port of Wilhelmshaven, followed by transporting and sequestering the CO2 in geological storage sites in the Norwegian North Sea (DACCS), the levelised costs increase to 161-176 EUR/tCO2. Due to the longer transport distances from southern and central Germany, a northern German site using wind turbines would be the most favourable.
Africa and in particular African Least Developed Countries have to a large extent been neglected by the Clean Development Mechanism (CDM). This article reviews the mechanism's performance in the region and highlights current developments. The analysis is based on a quantitative breakdown of data provided by the United Nations Environment Programme and Technical University of Denmark (UNEP/DTU) CDM Pipeline and was complemented by interviews with selected investors. The findings indicate that despite the various support measures for underrepresented regions, the overall share of African CDM activities continues to be low. The significant rise in the share of Programmes of Activities of recent years cannot make up for the continuing low numbers of African stand-alone projects. Further, the collapse of the compliance market has proved fatal in terms of timing: ongoing efforts to support the development of a genuine African carbon market were suffocated by the lack of demand for Certified Emission Reductions at a moment when capacity building had started to bear fruit. Consequently, instead of being a mitigation tool with significant scale, the future role of the CDM in Africa might be limited to the voluntary market, while at the same time serving as a tool to foster sustainable development, with mitigation benefits.
Roadmaps for India's energy future foresee that coal power will continue to play a considerable role until the middle of the 21st century. Among other options, carbon capture and storage (CCS) is being considered as a potential technology for decarbonising the power sector. Consequently, it is important to quantify the relative benefits and trade-offs of coal-CCS in comparison to its competing renewable power sources from multiple sustainability perspectives. In this paper, we assess coal-CCS pathways in India up to 2050 and compare coal-CCS with conventional coal, solar PV and wind power sources through an integrated assessment approach coupled with a nexus perspective (energy-cost-climate-water nexus). Our levelized costs assessment reveals that coal-CCS is expensive and significant cost reductions would be needed for CCS to compete in the Indian power market. In addition, although carbon pricing could make coal-CCS competitive in relation to conventional coal power plants, it cannot influence the lack of competitiveness of coal-CCS with respect to renewables. From a climate perspective, CCS can significantly reduce the life cycle GHG emissions of conventional coal power plants, but renewables are better positioned than coal-CCS if the goal is ambitious climate change mitigation. Our water footprint assessment reveals that coal-CCS consumes an enormous volume of water resources in comparison to conventional coal and, in particular, to renewables. To conclude, our findings highlight that coal-CCS not only suffers from typical new technology development related challenges - such as a lack of technical potential assessments and necessary support infrastructure, and high costs - but also from severe resource constraints (especially water) in an era of global warming and the competition from outperforming renewable power sources. Our study, therefore, adds a considerable level of techno-economic and environmental nexus specificity to the current debate about coal-based large-scale CCS and the low carbon energy transition in emerging and developing economies in the Global South.
The target of zero emissions sets a new standard for industry and industrial policy. Industrial policy in the twenty-first century must aim to achieve zero emissions in the energy and emissions intensive industries. Sectors such as steel, cement, and chemicals have so far largely been sheltered from the effects of climate policy. A major shift is needed, from contemporary industrial policy that mainly protects industry to policy strategies that transform the industry. For this purpose, we draw on a wide range of literatures including engineering, economics, policy, governance, and innovation studies to propose a comprehensive industrial policy framework. The policy framework relies on six pillars: directionality, knowledge creation and innovation, creating and reshaping markets, building capacity for governance and change, international coherence, and sensitivity to socio-economic implications of phase-outs. Complementary solutions relying on technological, organizational, and behavioural change must be pursued in parallel and throughout whole value chains. Current policy is limited to supporting mainly some options, e.g. energy efficiency and recycling, with some regions also adopting carbon pricing, although most often exempting the energy and emissions intensive industries. An extended range of options, such as demand management, materials efficiency, and electrification, must also be pursued to reach zero emissions. New policy research and evaluation approaches are needed to support and assess progress as these industries have hitherto largely been overlooked in domestic climate policy as well as international negotiations.
Research on sustainability transitions has expanded rapidly in the last ten years, diversified in terms of topics and geographical applications, and deepened with respect to theories and methods. This article provides an extensive review and an updated research agenda for the field, classified into nine main themes: understanding transitions; power, agency and politics; governing transitions; civil society, culture and social movements; businesses and industries; transitions in practice and everyday life; geography of transitions; ethical aspects; and methodologies. The review shows that the scope of sustainability transitions research has broadened and connections to established disciplines have grown stronger. At the same time, we see that the grand challenges related to sustainability remain unsolved, calling for continued efforts and an acceleration of ongoing transitions. Transition studies can play a key role in this regard by creating new perspectives, approaches and understanding and helping to move society in the direction of sustainability.
In material development processes, the question if a new alloy is more sustainable than the existing one becomes increasingly significant. Existing studies on metals and alloys show that their composition can make a difference regarding the environmental impact. In this case study, a recently developed air hardening forging steel is used to produce a U-bolt as an example component in automotive engineering. The production process is analyzed regarding the environmental performance and compared with the standard quench and tempering steels 42CrMo4 and 33MnCrB5-2. The analysis is based on results from applying the method of Life Cycle Assessment. First, the production process and the alterations on material, product, and process level are defined. The resulting process flows were quantified and attributed with the environmental impacts covering Carbon Footprint, Cumulative Energy Demand, and Material Footprint as they represent best the resource-, energy- and thus carbon-intensive steel industry. The results show that the development of the air hardening forging steel leads to a higher environmental impact compared to the reference alloys when the material level is considered. Otherwise, the new steel allows changes in manufacturing process, which is why an additional assessment on process level was conducted. It is seen that the air hardening forging steel has environmental savings as it enables skipping a heat treatment process. Superior material characteristics enable the application of lightweight design principles, which further increases the potential environmental savings. The present work shows that the question of the environmental impact does not end with analyzing the raw material only. Rather, the entire manufacturing process of a product must be considered. The case study also shows methodological questions regarding the specification of steel for alloying elements, processes in the metalworking industry and the data availability and quality in Life Cycle Assessment.
In this paper three approaches on transitions pathways are combined to study the role of agricultural nature conservation in the Dutch land use domain for achieving internationally agreed climate and biodiversity targets. The three perspectives used are the Multilevel Perspective (MLP), Initiative Based Learning (IBL) and Integrated Assessment Modelling (IAM). The analysis provides insights in how the combination of different research approaches can lead to more comprehensive policy advice on how agricultural nature conservation could help to achieve internationally agreed sustainability goals related to climate change and biodiversity. IAM shows under which conditions agricultural nature conservation could be consistent with European and global long-term goals regarding food security, biodiversity and climate. MLP provides insight into the extent in which agricultural nature conservation has affected or changed the existing nature and agricultural regimes. IBL, finally, reveals the challenges of encouraging agricultural nature conservation with policy measures. Our analysis shows that a combined perspective provides a deeper understanding of the underlying processes, reasons and motives of agricultural nature conservation, leading to more comprehensive policy recommendations.
Heating behavior of households is key for reducing domestic energy demand and mitigating climate change. Recently, various technical devices have been developed, providing households with feedback on their heating behavior and supporting energy conservation behavior.
The impact of such devices on overall energy consumption depends on (1) the impact of a device within a household, (2) the diffusion of devices to other households and the number of adopters, and (3) the diffusion of the induced behavioral change beyond these households. While the first two processes are currently established in assessments of sustainable household devices, we suggest that adding behavior diffusion is essential when assessing devices that explicitly target behavioral change. We therefore propose an assessment framework that includes all three processes. We implement this framework in an agent-based model by combining two existing simulation models to explore the effect of adding behavior diffusion. In three simulation experiments, we identify two mechanisms by which behavior diffusion (1) spreads the effect of such devices from adopters to non-adopters and (2) increases the average speed of behavioral change of households. From these results we conclude that behavior diffusion should be included in assessments of behavior-changing feedback devices.