Reaching the climate goals for the building sector requires to improve insulation and to increase air tightness of buildings in order to minimize heat loss. To achieve these goals and to prevent risks to the health of occupants and damages to the building fabric due to insufficient removal of pollutants and humidity, broad implementation of Mechanical Ventilation and Heat Recovery (MVHR) systems is crucial.
Comparable and up to date figures on the market penetration of MVHR systems across the EU are hardly available. However, figures point to only a small share of residential buildings being currently equipped with such systems (cf. Riviere et al. 2009). For the German building stock the figure is estimated to be below 5% (Händel 2011). The paper presents insights into the reasons for the slow diffusion of HRV technologies in the German building stock. It builds on the results of a recently completed research project whose central aim was to identify actor-specific and structural barriers for the diffusion of efficient ventilation systems in apartment buildings and to examine how these barriers can be addressed.
The analysis is based on 40 semi-structured expert interviews with energy consultants, HVAC craftsmen, and housing companies, as well as guided in-depth interviews with private owners of apartment buildings or apartments that were evaluated by means of qualitative content analysis. Based on the collected data, seven barrier categories were identified, each containing a range of single barriers for the diffusion of efficient ventilation systems within the residential building stock.
Results of the analysis were quantitatively validated by means of online surveys and a household survey among 1,008 households. The paper points out interdependencies within the chain of effects leading up to the investment decision of building owners. Furthermore, based on good practice examples identified within the data collection process, it proposes different measures to address these barriers.
More and more cities are setting themselves ambitious climate protection targets, including CO2 neutrality. Schools are important institutions of cities and therefore they have to play a central role in achieving this goal.
With the investment backlog building up and pressure from the Friday for Future movement increasing, the Wuppertal Institute and Büro Ö-quadrat have initiated the project Schools4Future, aiming to support secondary schools to become climate-neutral. In cooperation with secondary school students and teachers, the project team evaluated the existing situation of the participating schools and developed GHG-balances and feasible climate protection concepts. For this purpose, an Excel-based carbon footprint (CF) assessment tool for schools has been developed which is freely available. The tool covers all important emission areas, including heating energy, electricity use, travel to and from schools, school trips, the school canteen and paper consumption. The students were found capable to conduct the CF assessment with the guidance of the teacher, information materials and support of the researchers. So far, six pilot schools have completed their CF assessment with emissions ranging between 335 and 944 kg CO2 per person.
In this paper we present the tool and compare the CF assessment of some schools. We further elaborate on how the tool and project has increased the climate awareness and self-efficacy of students and even stimulated measures by the school board.
Comprehensive framework on asset management of transportation networks and resilience planning
(2018)
Renewable energy plays a key role in the sustainable pathway towards a low carbon future and, despite new supply capacities, the transformation of the energy system also requires the adoption of a method which allows for the integration of increasing amounts of renewable energy. This requires a transition to more flexible processes at an industrial level and demand side management (DSM) is one possible way of achieving this transition. Currently, increased shares of variable renewable energy can cause the electricity supply to become more volatile and result in changes to the electricity market. In order to develop a new dynamic equilibrium to balance supply and demand, sufficient flexibility in demand is required. As adequate storage systems are not available in the short to medium term, the potential for large electricity consumers to operate flexibly is an attractive, pragmatic and feasible option. Recent studies in Germany suggest that there is significant potential for DSM in so-called "energy-intensive industries". However, the figures (which fall in the approximate range of 1,250-2,750 MW positive and 400-1,300 MW negative shiftable load) should be interpreted with caution. The range of industrial processes considered are diverse and vary from plant to plant, with the result that it is difficult to provide accurate calculations of the accumulated potential for Germany or the EU as a whole. Based on extensive surveys and panel discussions with representatives from energy-intensive industries (aluminum, cement, chemicals, iron & steel, pulp & paper), which together account for approximately one third of the industrial electricity demand in Germany, our paper provides an overview of both the opportunities and the barriers faced by DSM. One of the key findings is the possible loss in energy efficiency due to DSM: in order to decrease or increase production depending on the stability needs of the electricity system, plants and processes may no longer operate at their optimum levels. The effects on downstream production must also be taken into account in order to gain a more complete understanding of the overall effects of industrial DSM.
"Sufficiency" is beginning to emerge as a new value throughout Western societies and the question asked in this article is: Can we observe cases with actual opportunities to link successful business strategies of incumbents to principles of sufficiency? Thus, how feasible is sustainable entrepreneurship for incumbents? As an innovative conceptual approach, it will be analyzed how brand claims function as narrative translation mechanisms in situations where tensions emerge between corporate narratives and unexpected societal trends, e.g. the emergence of sufficient lifestyles. It will be shown that even though these are still a niche phenomenon, a focus on powerful brands and the narratives connected to them are an important element in understanding the role of incumbents in transitions to sustainability.
In current German debates on sustainable urbanisation and urbanism, new urban actors reviving buildings, brownfields or whole neighbourhoods are discussed as potential drivers of urban transformation towards sustainability as well as potential co-producers for conventional actors in urban development and planning. These actor's projects can be understood as spatially confined niches for experimentation with (built) urban space itself. Building upon the concepts of niche entrepreneurship (Pesch et al., 2017) and the framework of strategic action field theory (Fligstein & McAdam, 2011; 2015), we ask how these actors secure support for their projects and how these projects in turn are altered in this process. Based upon a case study from Wuppertal, Germany, we show that in struggling for support of powerful actors, these actors often have to significantly compromise, and that these compromises can be understood as contextualisation in the project's spatial and institutional environment.
National policies for resource efficiency and waste management : structures, impacts, and deficits
(2015)
The overall objective of the web-based consumer information tool Euro-Topten is to promote the market transformation towards energy efficient products. Euro-Topten informs consumers about the most energy efficient products in various categories and thereby aims to directly influence the purchasing decisions of individuals or professional buyers.
Providers of internet-based information tools are confronted with the problem, that there is no bidirectional interaction with the users. Hence, it is difficult to evaluate if the specific needs of users are addressed, if and how the user processes this information and to what extent the information influences the user's decision making process.
To study these questions, a web-based survey was conducted in two consecutive rounds. In the first round the survey focused on the assessment of the information tool itself and the motivation for using the Euro-Topten websites. This survey was online on all active Euro-Topten partner websites from October to December 2012. In total, 1791 users completed the survey.
In the second round, a subset of the survey population was queried again. 1,043 participants agreed to take part in a more comprehensive follow up survey, 383 completed the second survey between May and July 2013. The second survey concentrated on the question how Euro-Topten has influenced the purchasing behaviour of the survey participants. This gave significant insights on how the information on the Euro-Topten websites has affected purchasing decisions of the surveyed users.
Based on a comparison of performance indicators of the most efficient products recommended on the Euro-Topten websites with performance indicators of a base case product available on the market, avoided energy demand could be estimated for those users, who bought products from the Euro-Topten list. Based on these results, two impacts of Euro-Topten could be estimated: The influence of Euro-Topten on purchasing decision of users and the associated reductions in energy demand and CO2-emissions.
In addition to the expansion of renewable energies, the efficient use of energy is crucial in order to ensure energy transition successful. The Federal Government of Germany has therefore set itself clear objectives with the National Energy Efficiency Action Plan (NAPE), which aims to reduce the primary energy consumption in Germany - compared to 2008 levels - by 20 per cent until 2020, and by 50 per cent until 2050. In addition, greenhouse gas emissions should fall by 40 per cent compared to 1990.
To reach this goal, the German Federal Ministry of Economic Affairs and Energy (BMWi) inter alia launched the "National Top Runner Initiative (NTRI)" in January 2016. It is an important component and concerns private homes, as well as industry, retail and services.
The NTRI is intended to bring energy efficient and high-quality appliances (so called Top Runners) onto the market more quickly, thus accelerate market replacement. For this purpose, motivation, knowledge and competence in product-related energy efficiency is to be strengthened and expanded along the whole value chain - from the appliance manufacturer to the retailer and the consumer. Manufacturers are pushed to develop more efficient products and consumers get valuable information about Top-Runner products and how they can benefit. In this context, retailers are especially relevant as they act as "gatekeeper" between manufacturers and consumers. They play a key role in advancing an energy efficient production and consumption. They do not only select the products but they also have a direct contact to consumers and influence the purchase decision. In this paper, special emphasis will be put on the role of retailers and the efforts of the National Top Runner Initiative will be illustrated. Barriers and incentives to motivate this target group will be elaborated.
Refrigerators and freezers (subsumed under the term "cold appliances") are among the most widely used electrical appliances in the residential sector all around the world. Currently, about 1.4 billion domestic cold appliances worldwide use about 650 TWh electricity, which is 1.2 times Germany’s total electricity consumption, and cause CO2 emissions of 450 million tons of CO2eq.
Although the specific electricity consumption per volume of cold appliances has decreased during recent years due to technical progress and policy instruments like labelling and eco-design requirements, total worldwide energy consumption of these appliances is on the increase. Scenario calculations were carried out for 10 world regions by the Wuppertal Institute. Results show that about half of the energy consumption could be saved with the most energy-efficient appliances available today, and even higher savings will be possible with next generation technologies by 2030. According to the analysis, these savings are usually very cost-effective.
All these aspects are part of the new website "bigEE.net - Your guide to energy efficiency in buildings" which aims to provide information about technical options but also about policies to support the development of energy-efficient appliances.
To initiate and foster market transformation of energy-efficient appliances it is highly advisable for policymakers to generate appliances-specific policy packages. Since each regional market has its specificity (e.g. energy prices, typical appliance affecting the cost effectiveness of efficient appliances), the barriers for the market transformation of single product groups are also specific and need to be addressed by appropriate policies and measures. Elements of measures to build appropriate specific policy packages for refrigerators will be presented in the paper, and the refrigerator package from California (USA) demonstrates the successful implementation of a sector-specific package.
About 2 % of the overall electricity consumption of the EU is caused by circulators in single or double family homes and flats. A new technology of pumps with electronically commutated (EC) motor pumps is available now; it is one possible way to achieve a reduction in circulator annual electricity use by 60 % or more.
The project's objective is a market transformation towards this new very energy-efficient pump technologies - Energy+ pumps - for circulators in heating systems, both stand alone and integrated in boilers. Only few manufacturers have so far introduced the new pump technology to the market for single or double family homes and flats.
To bring more products to the market from all major manufacturers, the project will adapt and apply the technology procurement methodology as it was very successfully tested in the European Energy+ project on energy-efficient cold appliances.
Large buyers will be aggregated, to activate the pump and boiler manufacturers. Sales and training materials and a sizing spreadsheet software for installation contractors will be developed and applied. A competition both for energy-efficient products and marketing campaigns will be organised and the information on the Energy+ pumps will be disseminated widely through website, newsletter, media, and fairs.
This paper gives a short overview of this project and presents the results of the first project phases: a European wide market study on circulators and heating systems, and the first Energy+ lists for circulators, buyers and supporters.
Die Wärmewende ist als Teil der Energiewende ein gesellschaftliches Großprojekt. Für eine erfolgreiche Umsetzung benötigt die Wärmewende im Vergleich zur Stromwende vielfältigere und differenziertere Handlungsmechanismen. Es geht dabei nicht nur um den Ersatz fossiler Energieträger im Bereich der Wärmeversorgung durch regenerative Quellen, sondern vielmehr um einen systemischen Ansatz, der zudem eine stringente Forcierung von Energieeffizienzmaßnahmen, eine optimierte Verzahnung von Strom- und Wärmesystemen sowie eine zielgruppenspezifische Adressierung und Sensibilisierung von Akteursgruppen (hier: Kommunen, Privathaushalte, Industrie, GHD) erforderlich macht.
The concept of regime and "flat ontologies" : empirical potential and methodological implications
(2012)
The German contribution to limiting global warming to two degrees has to be - as in other developed countries, too - a reduction of 80 to 95 percent of CO2 emissions by 2050 compared to 1990. The project "Low Carbon City Wuppertal 2050" has analysed how such a drastic reduction of CO2 could be achieved on a municipal level in the transportation and residential sector by also working on the land use and material flows dimension. The focus of this paper lies on the space heating in the residential sector.
Wuppertal is a city with about 350,000 inhabitants in the West of Germany. According to the CO2 balance (2007) of the city that was adjusted to the year 2010, the emissions that were caused by space heating in the residential sector remained almost the same since 1990. They decreased slightly from 693,000 tons CO2 in 1990 to 691,000 tons in 2010, although final energy use for space heating increased by about 15 percent. But the shift of energy sources especially from coal to gas avoided an increase of emissions. However, the reduction target of 95 percent means that CO2 emissions have to be reduced to 35,000 tons per year until 2050.
A reference scenario shows that the city could achieve about 30 percent of the reduction required with the current trend of renewable energy development and energy efficiency measures such as retrofitting the building stock. But looking at the difficult financial conditions of the municipality as well as at the socio-economic situation of the inhabitants it becomes clear that the remaining 65 percent of the target to a 95 percent reduction will be difficult to reach and that innovative measures of energy efficiency and sufficiency1 need to be developed.
But which social-ecological effects does the implementation of comprehensive climate protection measures have on the inhabitants of a city? How do people live in a "Low Carbon City"? In this paper qualitative and quantitative scenarios will be developed since the combination of both is promising to show both effects: what share could renewable energies, energy efficiency and sufficiency measures have in reaching the target of 95 percent, and how could life look like in an almost CO2 free city in Germany in 2050.
The efficiency strategy to exploit the potential for energy savings in buildings still is applied rather slowly in most countries. In addition, there are indications that energy savings are partly compensated particularly by wealth but also rebound effects, the "empty nest" (persistence of elderly people and couples in family homes), and cohort effects (e.g. vintages of people or buildings). In Germany, as in other European countries, the existing trend in housing is a continuously growing floor space per capita. Over the last decades it expanded from about 20 m2 in 1960 to currently 45 m2 per person. Forecasts expect a further increase to more than 50 m2 per person. Obviously, more floor space needs more energy for space heating and cooling, ventilation, and lighting, but it also allows the household to operate more and or bigger appliances, all of which increase energy consumption.
On the other hand, housing projects emerge offering relatively small private living spaces in combination with various shared spaces to use. Many of them are based on private initiatives. But what is the motivation behind it? And is there a higher need for new living concepts in the future?
The proposed paper presents main drivers of increasing floor space per capita in Germany and discusses the question if more space is necessary for higher comfort. It presents different examples of housing concepts that strive to achieve good living with less space and suggests a "building typology of sufficiency".
Finally, the paper discusses qualitatively to which extent these housing concepts can lead to less energy use and emissions. In this way sufficiency could be best friend with efficiency and tackle wealth, rebound, and other effects that counter-act efficiency progress. But therefore, as the paper concludes, politics and policies should recognise sufficiency as a field of action instead of referring to individual decisions and lifestyles.
Estimating the sufficiency potential in buildings : the space between underdimensioned and oversized
(2019)
The emission reduction potential of energy efficiency and energy supply in buildings is estimated in various energy and climate action plans, scenarios, and potential analyses. But the third pillar of sustainability - sufficiency - is neglected in most studies.The increasing demand of space per person in the residential sector is a trend in most European countries. Its implication on energy use, demand for resources like land, building material, equipment, and waste production is enormous. Next to the ecological impact, the distribution of space has social and societal effects. Thus, sufficiency policies in the building sector complementing efficiency and energy policy are needed for a sustainable development of the European building stock.
But how can a sufficiency potential in the building sector be estimated? How much space and equipment is needed for a decent living and how much is too much? The paper proposes four areas of sufficiency in buildings: space, design and construction, equipment, and use. It presents a set of indicators, a quantitative estimate of energy savings from reduced per capita floor area, and visualises the sufficiency potential in European countries in an experimental approach. The final discussion focuses on the question: What does this mean for policy making?
A case study in the rural area of South Westphalia, Germany, showed the importance of independent intermediaries to support the development and implementation of sustainable energy and efficiency projects. The idea behind the project "Dorf ist Energie(klug)" (Village is Energy(smart)) was to foster, accompany, and support energy and efficiency projects in villages from the first idea to final implementation. Therefore, the South Westphalia Agency as independent intermediary initiated an application process in which villages could apply with their innovative energy and efficiency project ideas. During the following process the chosen "coaching villages" benefitted from the consultation of teams of thematic experts. Villages with less developed projects were supported through idea workshops with experts and study visits.
The accompanying scientific study evaluated the overall process focussing on the transferability, the sustainability and the quality of the process. Furthermore, a self evaluation tool for (energy) projects in villages was developed and tested in two of the participating coaching villages.
The paper gives a short insight into the project "Dorf ist Energie(klug)". It presents the methodology of the accompanying study and the results with a special focus on the role of the South Westphalia Agency as independent intermediary. Finally, it discusses the transferability and sustainability of the project.
Techno-economic feasibility study of solar and wind based irrigation systems in Northern Colombia
(2014)
Water pumping systems powered by solar and wind energy are a clean, decentralized and economic alternative for the irrigation of crops. The intense droughts experienced in the last years in Northern Colombia due to particularly strong Nino Phenomena have reactivated the need of reliable water pumping irrigation systems in that region. This study aims to assess the techno economic feasibility of solar and wind based pumping irrigation system, taking as case study the Municipality of Piojo in the Atlantico department. In the first stage of the study the irrigation water requirements were determined by using the software CROPWAT based on two different crop patterns that represent existing feasible alternatives for small farmers of the region: i) a common crop pattern, which represent the current average distribution of crops for subsistence farming and ii) a fruit cash crop pattern that comprises crops for which well established markets in the region exist. Solar wind and diesel based pumping systems were sized based on the crop water demands for 1 ha. The unit irrigation costs of the three technologies, the two crop patterns and the three irrigation methods (surface, sprinkler and drip) were calculated and compared. The economical analysis was complemented with a cost-benefit analysis over 20 years. Our results show that both renewable energy based pumping systems (wind and solar) can cover the irrigation water demands of small farmers in the region. The economical analysis shows that windmills are the most cost effective solution followed by the solar pumping system. Diesel pumping system was the less cost effective, even though it does not comprise investment in water storage tank. The cost benefit analysis demonstrates that any irrigation system is financially unfeasible when providing water to a common crop pattern. In case of the fruit cash crop scenario the highest dividends were obtained by the wind pumping system and the lowest dividends by the diesel pumping system. The lowest payback period was obtained by the windmill after 7 years and could be even feasible after the fifth year if the surplus water would be used to irrigate larger areas. Dividends obtained in a fruit cash crop scenario with irrigation after 20 years were in the range of EUR 5200 and EUR 11200 higher than dividends obtained by the same crop pattern but without irrigation.
The Chinese national government has put energy efficiency and pollution control at the heart of its 11th five-year plan (2005-2010). However, implementation of national policies at the local level is notoriously poor in China. In order to tackle this problem, voluntary agreements were signed between local Environmental Protection Bureaus and 14 mostly state-owned companies from different energy-intensive sectors in Nanjing, Xi'an and Kelamayi in the context of an ongoing EU-funded pilot project. In Nanjing, for instance, agreed targets are in the range of a 3-5% reduction in energy intensity by 2009 over a 2007 baseline. The pilot agreements are informed by Dutch experiences with long-term agreements on energy efficiency (LTA/1989-1999) as European best practice, but have been significantly adjusted to Chinese circumstances. Much emphasis was put on process management applying a cooperative approach throughout. Each enterprise put together a so-called Energy Action Team for voluntary agreement development and implementation. This helped to create a sense of ownership in the companies and assigned clear responsibilities. Energy Action Teams conducted Energy Potential Scans in cooperation with a Dutch expert to identify energy saving potentials and possible measures to realize them. On this basis, achievable targets were agreed and a detailed action plan was developed. A first evaluation is scheduled for April 2009. By lifting industry on a more equal power level with government authorities, voluntary agreements showed to be an effective policy instrument to overcome traditional institutional constraints to environmental policy implementation at the local level in China.
Innovation and diffusion of car-sharing for sustainable consumption and production of urban mobility
(2008)
The need of recycling obsolete mobile phones has significantly
increased with the worldwide propagation of mobile phones and
their inherent rapid turnover. In this article, we examine the
acceptance of mobile phone return programs by using the
Technology Acceptance Model and multiple case studies. Our
findings can provide valuable recommendations for the setup of
future mobile phone return programs.
In the light of the tremendous challenges facing the energy systems of the Middle East and North Africa (MENA), a number of concepts, roadmaps and scenario studies have emerged, describing potential transformation pathways towards a more sustainable, renewable-based, energy supply future in the region. Our article uses the scientific approach of "transition research" to analyze the most pertinent publications and concepts in this field to identify the key drivers and barriers for the transformation of the regional energy systems. The analysis likewise includes an assessment of possible indicators and indexes that can be used to monitor the sustainability of the transformation process of MENA energy systems.
Nachhaltiges Ressourcen-Management : eine Herausforderung für die Politik und die Wissenschaft
(2013)
Energy efficiency of a range of domestic appliances covered by the labelling and ecodesign directives has improved significantly over the last 15 years. However, the power consumption of the German residential sector has remained relatively constant over this period. Besides other factors, such as decreasing average household size, the main reasons for this development were the increases of the types, features, size, equipment stock and usage times of appliances and devices in private households.
The project "Energy Sufficiency - strategies and instruments for a technical, systemic and cultural transformation towards sustainable restriction of energy demand in the field of construction and everyday life" investigates how the complementation of energy efficiency with energy sufficiency could lead to more user adequate domestic products and product-service systems and thereby result in an absolute reduction of power consumption.
In this project, energy sufficiency is defined as a strategy to reduce energy consumption by three approaches:
1. Quantitative reduction of sizes, features, usage times of devices etc.
2. Substitution of technical equipment in households by e.g.urban services.
3. Adjustment of technical services delivered by appliances toutility needed and desired by users.
The energy saving effects of an application of these approaches were modelled for different types of households and the energy saving potentials of energy sufficiency quantified. Innovative approaches for user adequate products and services were developed in open innovation workshops by the Design Thinking method. The paper summarizes some of the intermediate results of theoretical and transdisciplinary investigations of the project that runs until May 31, 2016. Furthermore, a first set of design criteria for user adequate appliances enabling energy sufficiency are developed based on these results. The paper concludes with suggestions for the future development of energy labelling and ecodesign derived from the design criteria and supplemented by examples of existing requirements according to the voluntary environmental label "Blauer Engel".
In recent years, many energy scenario studies have proven that a power supply system based on renewable energies (RE) >90 percent is feasible. However, existing scenarios differ significantly in the composition of generation technologies. Some scenarios focus on wind energy in the northern part of Europe, others base on a large utilisation of solar technologies in the south. Apart from the generation capacities, the needed technical flexibilisation strategies such as grid extension, demand flexibilisation and energy storage are generally known and considered in many scenarios. Yet, the impact of different renewable generation strategies on the local utilisation of flexibility options needs to be further assessed. Based upon the BMBF research project RESTORE2050, analyses have been carried out that focus on these interdependencies. The results of the project show that the local utilisation of flexibilisation options depends to a great extent on the technology focus of the long-term renewable expansion strategy. This applies for the spatial flexibilisation as provided by transnational interconnection capacities, especially the ones connecting regions with a surplus of power generation (e.g. GB, Norway and Spain). Another impact of the renewable scenario is seen on the required temporal flexibilisation of electricity generation and demand. In addition, the available options will compete for high utilisation in a future energy system. The differences in the utilisation of these applications, which base on the varying shares of photovoltaic (PV) and wind energy generation, lead to the conclusion that the decision about longterm RE expansion ought to be made very soon in order to avoid inefficient flexibility pathways. Otherwise, if the future RE structure will be kept open, adequate adoption of new flexibility options will be difficult, especially in case of technologies with long lead and realisation time (e.g. new power grids and large scale energy storage devices).
In 2008, transport accounted for 27% of the world’s total final energy consumption. Currently, we are facing a rapidly expanding transport sector with continually increasing energy consumption. In the future, emerging and developing countries especially will experience an accelerated growth in transport energy demand due to rapid population growth, urbanisation and rising per capita income. The transport sector’s inefficiency and its dependency on oil will become an economic burden for these countries. They will have to face increasing crude oil prices and uncertainties regarding energy security.
Thus, there is a need for an efficient transport system and particularly for decision makers in developing and emerging countries to have access to planning advice in order to identify suitable and effective measures for low-energy urban transport. To meet this demand, existing knowledge and measures about energy efficiency in urban passenger transport was compiled and a structured introduction to energy efficiency in transport is provided.
The main determinates of an energy-efficient transport system are explained and strategic approaches to increase energy efficiency are outlined. Success factors and barriers for energy efficiency policies are described. The main element of the paper is an overview of different energy efficiency policies and measures for the key actors in energy-efficient transport on local and national levels. A set of measures is assigned to each actor identified. The compilation was adapted to the circumstances in developing and emerging countries and includes examples for successful implementation of several measures. Thus, the document satisfies the need for a comprehensive introduction to energy efficiency in urban transport in developing and emerging countries.
Fernwärme (FW) spielt aufgrund ihres Potenzials zur effizienten Integration erneuerbarer Energien (EE) und Abwärme eine entscheidende Rolle für die Umsetzung der Wärmewende. Im Rahmen dieses Beitrags werden Herausforderungen, Maßnahmen und Trends sowie Projektbeispiele für die künftige Fernwärmeversorgung beleuchtet.
Die Akteurswende
(2015)
Die zunehmende Abkehr vom ursprünglichen EEG-Vergütungssystem mit einer festen Einspeisevergütung hin zu einer mehr und mehr marktorientierten Ausrichtung führt zu der Frage, ob die Umstrukturierung des EEG am Ende zu einer neuen Phase der Energiewende führt, der Neo-EEG-Phase.
Im vorliegenden Artikel werden die Veränderungen und Entwicklungsphasen des EEG mit besonderem Blick auf die Akteure des Stromsystems analysiert. Im Kontext der Energiewende können die zu beobachtenden und teils deutlich einschneidenden Veränderungen für alle Akteure des Systems durchaus als "Akteurswende" verstanden werden.
Increasing urbanisation and climate change belong to the greatest challenges of the 21st century. A high share of global greenhouse gas emissions are estimated to originate in urban areas (40 % to 78 % according to UN Habitat 2010). Therefore, low carbon city strategies and concepts implicate large greenhouse gas (GHG) mitigation potentials. At the same time, with high population and infrastructure densities as well as concentrated economic activities, cities are particularly vulnerable to the impacts of climate change and need to adapt. Scarce natural resources further constrain the leeway for long-term, sustainable urban development. The Low Carbon Future Cities (LCFC) project aims at tapping this three-dimensional challenge and will develop an integrated strategy / roadmap, balancing low carbon development, gains in resource efficiency and adaptation to climate change. The study focuses on two pilot regions - one in China (Wuxi) and one in Germany (Düsseldorf+) - and is conducted by a German-Chinese research team supported by the German Stiftung Mercator. The paper gives an overview of first outcomes of the analysis of the status quo and assessment of the most likely developments regarding GHG emissions, climate impacts and resource use in Wuxi. The project developed an emission inventory for Wuxi to identify key sectors for further analysis and low carbon scenarios. The future development of energy demand and related CO2 emissions in 2030 were simulated in the current policy scenario (CPS), using five different sub-models. Selected aspects of Wuxi's current material and water flows were analysed and modelled for energy transformation and the building sector. Current and future climate impacts and vulnerability were investigated. Recent climatic changes and resulting damages were analysed, expected changes in temperature and precipitation in the coming four decades were projected using ensembles of three General Circulation Models. Although Wuxi's government started a path to implement a low carbon plan, the first results show that more ambitious efforts are needed to overcome the challenges faced.
Functional service contracts for white goods : selling a function instead of a product (FUNSERVE)
(2001)
Enhancing evaluations of future energy-related product policies with the digital product passport
(2022)
Since human nutrition is responsible for about 30 % of the global natural resource use and in order to decrease resource use to a level in line with planetary boundaries, Lukas et al. (2016) proposed a re-source use reduction in the nutrition sector by a factor 2 (Material Footprint).
The catering sector needs clearly defined indicators to assess their business activities' impact on ecology, social aspects, economic value, and health status. Within the project NAHGAST two sets of indicators, called NAHGAST Meal-Basis and NAHGAST Meal-Pro were developed. The indicator sets are proposed to measure several, with sustainability-associated challenges, such as such as the ecological, social and economical effects, which may come along with the production and the consumption of a meal. Basically, the NAHGAST Meal-Basis deals with qualitative indicators, such as the amount of organic food per serving or the percentage of food wasted. This set is supposed to enable leaders to assess the sustainability of their meals and to visualize future improvements on a simplistic level. The NAHGAST Meal-Pro deals with a more sophisticated set of indicators, such as the carbon and material footprint or the cost recovery per meal. Both sets are underpinned with sus-tainable targets and elaborated as an Excel-based assessment tool, which is tested within a one-year case study. The usefulness and the limits of the tool, as well as current results of the implementation including pro-posed challenges, are discussed.
Energy intensive industries are one of the fields in which strong increases of energy efficiency and deep decarbonisation strategies are particularly challenging. Although European energy intensive industries have already achieved significant energy and greenhouse gas reductions in the past, much remains to be done to make a significant contribution to achieving European as well as national climate mitigation targets of greenhouse gas emission reductions by -80% or more (compared to the baseline of 1990). North Rhine-Westphalia (NRW) is a European hotspot for coping with this challenge, accommodating more than 10% of the energy intensive industries of the EU28. It is also the first German state to have adopted its own Climate Law, enacting state-wide CO2 emission reductions by 80% until 2050 compared to 1990. The state government initiated the project "Platform Climate Protection and Industry North-Rhine Westphalia" to identify and develop the necessary far-reaching low carbon innovation strategies for energy intensive industries. Heart of the project was a dialogue process, which involved a broad spectrum of stakeholders from steel, chemical, aluminium, cement, glass and paper producing industries. Besides enhancing and broadening the knowledge on high efficiency and low-carbon technologies within industries, the aim was to explore possible pathways and preconditions for the application of these technologies in energy intensive industries as well as to strengthen the motivation of companies for initiatives and investments in technologies with lower CO2 emissions. The results of the dialogue shall provide a basis for a possible low-carbon industry roadmap NRW and may also serve as an example for other industrialized regions in the EU and globally. The paper sketches the structured dialogue process with the stakeholders from companies as well as industrial associations and presents the learnings regarding the engagement of energy intensive industries into ambitious climate policies on a regional level. These include existing limitations as well as chances in the respective sectors on the state level, regarding their economic and technical structures as well as their innovation systems. The findings are based on more than a dozen stakeholder workshops with industry companies and more than 150 individual representatives of NRW's energy intensive industries as well as on background research in the initial phase of the project.
A discussion on the potential for the development of hydrogen as an energy carrier in Portugal
(2005)
Bei der Energiewende handelt es sich um einen komplexen Transformationsprozess, der nicht allein aus der nationalen Perspektive betrachtet werden kann. Er ist nicht vollständig unabhängig, sondern in einen Mehr-Ebenen-Prozess eingebunden. Es gilt entsprechend sowohl lokale als auch regionale, nationale, europäische und auch die internationalen Energiewendeprozesse und zugehörigen Rahmenbedingungen zu diskutieren und zu beachten. Es gilt aber auch, über den eigentlichen Energiebereich hinausgehende Trends in ihren Wechselwirkungen mit dem Energiesystem zu identifizieren und zu analysieren. Mit der Energiewende wird zudem eine Zielvielfalt angesprochen. Es geht über das Erreichen von Klimaschutzzielen hinaus um eine größere Vielfalt von gesellschaftlich-politischen Zielen.
Der Transformationsprozess hat keine eindimensionale Zielorientierung, sondern muss in einer mehrdimensionalen Betrachtung analysiert werden.
Erneuerbare Energien und Energieeffizienz : Systemlösungen als Schlüsselelement der Energiewende
(2013)
Erneuerbare Energien und Energieeffizienz sind die Schlüsselstrategien für die Umsetzung einer klimaverträglichen Energieversorgung in Deutschland und weltweit. Dieser Beitrag soll die Kopplung zwischen erneuerbaren Energien und Energieeffizienz im Kontext von Systemlösungen aufzeigen. Diese Systemlösungen sollten schon sehr frühzeitig und systematisch im Kontext von technologischen Lösungen, von Infrastrukturansätzen und von Politikansätzen bedacht werden.
Die Energiewende stellt einen ambitionierten und zugleich hochkomplexen Transformationsprozess dar. Der vorliegende Artikel stellt acht Thesen auf, die dabei helfen können, die Herausforderungen besser zu verstehen und Ansatzpunkte für zukünftiges Handeln zu identifizieren sowie Forschungsbedarf aufzuzeigen.
Improving material efficiency in the manufacturing industry is a sustainability imperative for companies due to economic and environmental advantages such as the reduction of material costs and resource use. Innovative solutions in terms of material efficiency measures are diverse and widespread. As a systematic assessment of efficiency approaches and their effects are likely to support dissemination and deployment, this paper aims to develop an approach that helps to classify material efficiency measures. The classification approach presents different dimensions and properties of material efficiency measures based on a literature analysis regarding existing classification approaches as well as on work that has been conducted for the Eco-Innovation Observatory. The classification has been designed as basis for an empirical impact assessment of material efficiency measures based on a data sample that stems from the German Material Efficiency Agency.
Kommunale Wärmetransformationsprojekte verfolgen verschiedene Ziele gleichzeitig. In der Regel soll die Transformation einen Beitrag leisten, um die Treibhausgasemissionen der Wärmeversorgung zu senken. Gleichzeitig stehen aber weitere Ziele, u. a. die Sozialverträglichkeit, Akzeptanz und wirtschaftliche Tragfähigkeit im Fokus der Akteure. Dabei muss eine einseitige Zieloptimierung vermieden werden. Darüber hinaus erscheint es sinnvoll, den Beitrag der jeweiligen Konzepte zu den Nachhaltigkeitszielen im Blick zu behalten.
Im Kontext kommunaler Wärmetransformationsprojekte geht es auf der Bedarfsseite darum, die Energieverbräuche für Raum- und Prozesswärme zu senken. Die Akteure auf Seiten der Abnehmer und Wärmenutzer:innen sind u. a. gewerbliche Unternehmen, die Wohnungswirtschaft, die öffentliche Hand und die Bewohner:innen.
Auf der Versorgungsseite muss die Wärmebereitstellung von fossilen Energieträgern umgestellt werden auf regenerative Energien, wie Bioenergie, Solarthermie, Geothermie, Umgebungswärme und industrielle Abwärme. Daher treten hier als Akteure der Wärmewende nicht mehr nur Energieversorgungsunternehmen, Stadtwerke und Kommunen, sondern bspw. auch Industrieunternehmen als Abwärmequellen und Selbsterzeuger auf.
Dieser Beitrag ordnet zunächst eine multikriterielle Nachhaltigkeitsbewertung in das Vorgehen kommunaler Wärmetransformationsprojekte ein. Anschließend werden Ansätze einer multikriteriellen Nachhaltigkeitsbewertung aus Projekten von FVEE- Mitgliedseinrichtungen dargestellt. Der dritte Abschnitt schließlich zeigt, wie diese in der Interaktion und Kommunikation mit den Akteuren genutzt werden können.