Refine
Year of Publication
Document Type
- Peer-Reviewed Article (635)
- Report (530)
- Part of a Book (355)
- Conference Object (351)
- Working Paper (230)
- Contribution to Periodical (189)
- Doctoral Thesis (35)
- Book (29)
- Master Thesis (10)
- Periodical Part (5)
Language
- English (2370) (remove)
Division
It is widely accepted that environmental awareness is essential, yet does not inevitably lead to responsible use of resources. Additional factors on the individual level include the meaning constructed by the term "resources" and the individual and social norms that influence the relevant behavior. Current didactic concepts do not take into account such aspects. Therefore, this article uses a didactic-psychological approach for designing an educational concept for raising awareness for a responsible use of natural resources. Combining insights of environmental psychology and of constructivist didactics, a general principal of "norm-oriented interpretation learning" is outlined to enrich the didactic debate on responsible and efficient resource use. Based on the presentation of a qualifying module for resource efficiency consultants as a practical example of resource education, a new didactical approach, namely "open-didactic exploration" (short form: ODE) is introduced. The article discusses the theory-based elements of ODE and illustrates a step by step process for designing educational materials. This adds to the theoretical debate about a didactic design for resource oriented education. Furthermore, this method can be directly used by practitioners developing education and training material (e.g., teachers, trainers in vocational education). The Wuppertal Institute developed and applied this method in numerous projects. The conclusion and outlook discusses future expectations and scope of the introduced ODE method as a contribution to foster "norm-oriented interpretation learning", suggesting perspectives for further development.
This study is an exploratory analysis to provide a prioritisation and indication of extensiveness of review activities related to measures that currently exist for eight product groups: Domestic Washing Machines, Domestic Dishwashers, Domestic Washer-Driers, Domestic Cold Appliances, Lighting products (non-directional, tertiary and "special purpose"), Set-top Boxes. For water pumps only a review of tolerances was required.
The analysis focused on possible energy savings as basis for prioritisation, but - following the request of the European Commission made during the kick-off meeting - also considers resource efficiency aspects insofar feasible within the constraints of the study. The conclusion of this exploratory study is that for all product groups considered (except pumps) a revision of existing regulations (or introduction of new regulations) is the preferred policy option.
The analysis shows that these product groups are expected to (continue to) meet eligibility criteria for the introduction of ecodesign and/or energy labelling measures, with simple set top boxes as sole exemption as its market and environmental significance is in rapid decline (sales are expected to be marginal by 2020).
The data centre industry (DCI) has grown from zero in the 1980s, to enabling 60% of the global population to be connected in 2021 via 7.2 million data centres. The DCI is based on a linear economy and there is an urgent need to transform to a Circular Economy to establish a secure supply chain and ensure an economically stable and uninterrupted service, which is particularly difficult in an industry that is comprised of ten insular subsectors. This paper describes the CEDaCI project which was established to address the challenge in this unique sector; this ground-breaking project employs a whole systems approach, Design Thinking and the Double Diamond methods, which rely on people/stakeholder engagement throughout. The paper reviews and assesses the impact of these methods and project to date, using quantitative and qualitative research, via an online sectoral survey and interviews with nine data centre and IT industry experts. The results show that the project is creating positive impact and initiating change across the sector and that the innovative output (designs, business models, and a digital tool) will ensure that sectoral transformation continues; the project methods and structure will also serve as an exemplar for other sectors.
Bad Hersfeld is a small city with about 30.000 inhabitants situated in the middle of Germany. Climate Protection has been on the political agenda in Bad Hersfeld since quite a while. In 1997 the Wuppertal Institute elaborated a first energy and CO2 balance for the city, which was updated in 2007. With the compilation of the CO2 balance it was shown that the emissions in Bad Hersfeld almost stayed at a constant level between 1997 and 2006.
The result was sobering for the local authority. Although some single measures had been implemented, there was no improvement of the CO2-balance.
It was concluded that a successful climate protection strategy needs a comprehensive concept comprising all sectors and a periodic monitoring. Bad Hersfeld commissioned the Wuppertal Institute to develop feasible measures to reduce the CO2 emissions drastically and instruments to overcome existing barriers. In a close cooperation with the City Council and the local municipal utility a climate protection concept was compiled that is rather ambitious for a city of this size.
In consideration of the regional peculiarities12 concrete measures and 7 accompanying measures build the core of the concept with a main focus on energy efficiency (final energy), combined heat and power (CHP) and renewable energies. Another important part of the concept is a municipal support programme to develop the endogenous efficiency potentials and renewable energies in the region. Further to these planning instruments, information and networking activities are compiled as well as a variety of suggestions for a climate protection marketing (Wagner 2008).
Some of these measures that were developed in an iterative and cooperative process between the responsible actors in Bad Hersfeld and the Wuppertal Institute are transferable to other cities and towns. The impeding factors in Bad Hersfeld like the user-investor dilemma, the low capital of small housing associations or the large stock of listed historical buildings, are typical for cities of this size.
Both focus group discussions and information-choice questionnaires (ICQs) have previously been used to examine informed public opinions about carbon dioxide capture and storage (CCS). This paper presents an extensive experimental study to systematically examine and compare the quality of opinions created by these two research techniques. Depending on experimental condition, participants either participated in a focus group meeting or completed an ICQ. In both conditions participants received identical factual information about two specific CCS options. After having processed the information, they indicated their overall opinion about each CCS option. The quality of these opinions was determined by looking at three outcome-oriented indicators of opinion quality: consistency, stability, and confidence. Results for all three indicators showed that ICQs yielded higher-quality opinions than focus groups, but also that focus groups did not perform poor in this regard. Implications for the choice between focus group discussions and ICQs are discussed.
Urban energy systems have been commonly considered to be socio-technical systems within the boundaries of an urban area. However, recent literature challenges this notion in that it urges researchers to look at the wider interactions and influences of urban energy systems wherein the socio-technical sphere is expanded to political, environmental and economic realms as well. In addition to the inter-sectoral linkages, the diverse agents and multilevel governance trends of energy sustainability in the dynamic environment of cities make the urban energy landscape a complex one. There is a strong case then for establishing a new conceptualisation of urban energy systems that builds upon these contemporary understandings of such systems. We argue that the complex systems approach can be suitable for this. In this paper, we propose a pilot framework for understanding urban energy systems using complex systems theory as an integrating plane. We review the multiple streams of urban energy literature to identify the contemporary discussions and construct this framework that can serve as a common ontological understanding for the different scholarships studying urban energy systems. We conclude the paper by highlighting the ways in which the framework can serve some of the relevant communities.
Access to sustainable and affordable energy services is a crucial factor in reducing poverty in developing countries. In particular, small-scale and community-based renewable energy projects are recognized as important forms of development assistance for reaching the energy poor. However, to date only a few empirical evaluations exist which analyze and compare the impact of these projects on local living conditions and their sustainability ex-post implementation.
To better understand the impacts and the conditions that influence sustainability of these projects, the research presented in this paper evaluated 23 local development projects post implementation. By applying an standardized evaluation design to a cross-sectional sample in terms of renewable energy sources (solar, wind, biomass, hydro), user needs (electricity, food preparation, lighting, productive uses), community management models, finance mechanisms and geographical locations, the review results provide valuable insights on the underlying conditions that influence the success or failure of these small-scale local energy interventions. The empirical evidence suggests that the sustainability of small-scale energy implementations (≤100 kW) in developing countries is determined by the same factors, independent of the socio-cultural, political and ecological context. These findings allow to better predict the long-term success of small sustainable energy projects in developing countries, this can help to improve project designs and increase the certainty for future investment decisions.
New energy technologies may fail to make the transition to the market once research funding has ended due to a lack of private engagement to conclude their development. Extending public funding to cover such experimental developments could be one way to improve this transition. However, identifying promising research and development (R&D) proposals for this purpose is a difficult task for the following reasons: Close-to-market implementations regularly require substantial resources while public budgets are limited; the allocation of public funds needs to be fair, open, and documented; the evaluation is complex and subject to public sector regulations for public engagement in R&D funding. This calls for a rigorous evaluation process. This paper proposes an operational three-staged decision support system (DSS) to assist decision-makers in public funding institutions in the ex-ante evaluation of R&D proposals for large-scale close-to-market projects in energy research. The system was developed based on a review of literature and related approaches from practice combined with a series of workshops with practitioners from German public funding institutions. The results confirm that the decision-making process is a complex one that is not limited to simply scoring R&D proposals. Decision-makers also have to deal with various additional issues such as determining the state of technological development, verifying market failures or considering existing funding portfolios. The DSS that is suggested in this paper is unique in the sense that it goes beyond mere multi-criteria aggregation procedures and addresses these issues as well to help guide decision-makers in public institutions through the evaluation process.
A discussion on the potential for the development of hydrogen as an energy carrier in Portugal
(2005)
The use of materials and the generation of waste are linked to economic activities and in many projections these are assumed to be a constant ratio of the economic activities. This may be the case considering detailed economic activities and unchanged technology. However, the assumption of constant coefficients is questionable when linking material use and waste generation to aggregated economic activities. Therefore, in this paper, econometrics is used to test the assumption of constant waste coefficients empirically. The analyses show that an assumption of constant waste coefficients is not supported, generally, and amodel allowing for trendwise changing coefficients is developed and used for projections of waste and material flows in 25 European countries.
The 2014 United Nations Climate Change Conference had been scheduled from 1 to 12 December in Lima/Peru. While in the run-up to the conference, China and the US in a surprise bilateral move had announced plans to cut greenhouse gas emissions that exceeded expectations, the conference was characterised once again by a deep division between key players from the former so-called "developed" and "developing" world. The negotiations thus took 32 hours longer than planned and ended on Sunday morning at 1.22 am. More importantly, the conference failed almost completely to resolve the tasks it was supposed to do in order to prepare the last round of negotiations before next year's conference in Paris 2015, which is supposed to deliver a comprehensive future climate agreement. A team of researchers from the Wuppertal Institute attended the conference and have compiled a first assessment of the results.
A global collaborative accounting network to calculate the resource use of products and services
(2015)
Conventional new buildings in OECD countries with a history of building codes save about 50 % of energy compared to average buildings in the building stock. This improvement, however, is not enough to create a building standard with low lifetime costs nor to reach long-term climate protection targets. Much higher energy savings can already be achieved through proven high-efficiency building concepts bringing net economic benefits among other advantages.
A strategic approach to integrated building design is the key to achieving these high-energy savings at low or no extra cost in residential buildings. In our paper we describe the "Easy Efficiency Approach", which can reduce primary energy consumption by 40 to 60 % compared to conventional new building standards, or by 70% to 80% when compared to the primary energy consumption of the existing building stock, and should be regarded as the minimum. This strategy focuses on low-cost options, mainly passive options. Although it can already significantly reduce energy consumption, this first step will not be sufficient to reach long-term climate protection goals. It is thus necessary to implement and support what we call an "Advanced Efficiency Approach", with savings up to 90% , as compared to new building standards, as soon as possible to avoid lock-in effects. Further improvements, especially through the active use of renewable energies, reduce the net primary energy demand to 0 % and beyond.
According to the chosen strategy clearly defined energy performance ranges, with reference to possible savings, for different climate zones worldwide are given. In verifying this approach simulations with BAT (Best Available Technologies) buildings of different types (single family, multi family, high rise) were carried out in close cooperation with project partners. This data has also been verified through an empirical database of built examples both for energy consumption as well their economic soundness.
The study "A Green New Deal for Europe" consists of two basic elements: Firstly it aims to cope with the economic crisis through intensive measures in order to systematically stimulate the eco-industries, to create jobs and to boost economic recovery. Secondly it aims at establishing the foundation for a green modernisation of the European economy. The study examines existing EU strategies policies and programs concerning their suitability to implement the Green New Deal. It proposes exemplary measures in the field of energy, mobility and resource use. The study has been compiled by the Wuppertal Institute on behalf of the Greens/European Free Alliance (EFA) Group in the European Parliament.
Sustainability as defined by the Brundtland Commission, is a composite and thus ambitious policy target. It comprises environmental, economic, social, and institutional criteria with equal importance. Because of this complexity the first step of a (Local) Agenda 21 process should be to develop a vision of a sustainable society - a "leitbild" - useful as a compass, not a road map (or, even worse, a blueprint), attached by indicators that help to measure progress, distance to target, and failures of plans or their implementations. In the following article a model is proposed how local sustainability indicators can be developed and how they can help to reduce the complexity of sustainability and to concretize a program for the Local Agenda 21. To get a practical impression of the theoretical presentation an example is given in the last part of the article. It shows the experiences made while developing sustainability indicators in the City of Iserlohn.
The paper describes patterns of resource use related to German households' equipment. Using cluster analysis and material flow accounting, data on socio-demographic characteristics, and expenditures on fuel, electricity and household equipment allow for a differentiation of seven different household types. The corresponding resource use, expressed in Material Footprint per person and year, is calculated based on cradle-to-gate material flows of average household goods and the related household energy use. Our results show that patterns of resource use are mainly driven by the use of fuel and electricity and the ownership of cars. The quantified Material Footprints correlate to social status and are also linked to city size, age and household size. Affluent, established and/or younger families living in rural areas typically show the highest amounts of durables and expenditures on non-durables, thus exhibiting the highest use of natural resources.
Agriculture is a major sector responsible for greenhouse gas emissions. Local food production can contribute to reducing transport-related emissions. Since most of the worldwide population lives in cities, locally producing food implies practicing agriculture in urban and peri-urban areas. Exemplary, we analyze the potential to produce fresh vegetables within Berlin, Germany. We investigate the spatial extent of five different urban spaces for soil-based agriculture or gardening, i.e., non-built residential areas, allotment gardens, rooftops, supermarket parking lots, and cemeteries. We also quantify inputs required for such food production in terms of water, human resources, and investment. Our findings highlight that up to 82% of Berlin’s vegetable demand could be produced within the city, based on a reasonable validation of existing areas. Meeting this potential requires 42 km2 of urban spaces for cultivation, a considerable amount of irrigation water, around 17 thousand gardeners, and over 750 million EUR of initial investments. The final vegetable cost would be around 2 EUR to 10 EUR per kg without any profit margin. We conclude that it is realistic to produce a significant amount of Berlin's vegetable demand within the city, even if it comes with great challenges.
A learning experience : integrating theory and practice for the implementation of INDCs ; thinkpiece
(2016)
A major cornerstone on the way to low-carbon sustainable development on a global scale will be a swift and effective implementation of all countries' INDCs submitted to the UNFCCC prior to Paris. However, doing so will require transforming development pathways away from currently pervasive carbon lock-ins. This can only be successful if countries take a systemic view on their development agendas, and link mitigation, adaptation and other developmental priorities together for a coherent overarching sustainable development strategy. The ownership for this process needs to be with the countries themselves as such strategies touch fundamentally upon national policy-making and implementation. At the same time, developing countries have access to bi- and multilateral financial and technical cooperation. To enable a systemic, country-led perspective, development cooperation needs to shift its paradigms away from currently prevalent project-level interventions.
A truly innovative and transformational shift with the objective of pursuing a low-carbon and climate resilient society needs to open up space for experimentation as new ways of doing things need to be put into practice. Experiments will not always be successful, but foster learning on a national as well as an international level on pitfalls and solutions in new approaches to low-carbon sustainable development. Not least, there needs to be a renewed focus on programmatic approaches that link various topical domains for a country-led process, and a critical look at development work that is "doomed to succeed".
Our article draws from systems theory, development studies and recent work on transitions studies and transformational change in the international domain. It links up different theoretical concepts with practical approaches in order to outline a future development agenda that will be owned by developing countries and supported non-invasively by bi- and multilateral development cooperation to foster low-carbon development pathways that are urgently needed to solve the climate crisis.
National welfare is no longer an effective frame of reference for enlightened foreign policy. Policy consideration must encompass the common welfare of a world society. Environmental and resource crises are inextricably tied to security and justice. Sixty years after the founding of the United Nations there should be a new effort to establish a genuinely sustainable global order - a "San Francisco 2.0".
Optimization and simulation models are fit to work on a multitude of technical, economic, and techno-economic questions. However, they are by now not able to satisfactorily include societal aspects like acceptance, spatial implications and legal frameworks. In order to advance scope and explanatory power of simulation models, collaboration in interdisciplinary research teams is needed. Yet the exchange in such teams and its coordination can prove challenging. Furthermore, disciplinary approaches and methods for simulation and optimization might not be familiar to all participants.
To this end, a new conceptual model is introduced. The conceptual model employs few basic elements and concepts for describing and explaining arbitrary societal and technical relationships. Most notably, the conceptual model is general in its design, so contributions to the problem formulation and design components can be made by all team members regardless of their discipline. The procedure is based on common agent-based concepts without using their terminology. Consequently, an exchange among all team members becomes possible without them necessarily being proficient in agent-based modeling. A reduced presentation of workshop results exemplifies the use of novel elements for deriving an emergent agent-based simulation.
The Paris Agreement introduces long-term strategies as an instrument to inform progressively more ambitious emission reduction objectives, while holding development goals paramount in the context of national circumstances. In the lead up to the twenty-first Conference of the Parties, the Deep Decarbonization Pathways Project developed mid-century low-emission pathways for 16 countries, based on an innovative pathway design framework. In this Perspective, we describe this framework and show how it can support the development of sectorally and technologically detailed, policy-relevant and country-driven strategies consistent with the Paris Agreement climate goal. We also discuss how this framework can be used to engage stakeholder input and buy-in; design implementation policy packages; reveal necessary technological, financial and institutional enabling conditions; and support global stocktaking and increasing of ambition.
Given large potentials of the MENA region for renewable energy production, transitions towards renewables-based energy systems seem a promising way for meeting growing energy demand while contributing to greenhouse gas emissions reductions according to the Paris Agreement at the same time. Supporting and steering transitions to a low-carbon energy system require a clear understanding of socio-technical interdependencies in the energy system as well as of the principle dynamics of system innovations. For facilitating such understanding, a phase model for renewables-based energy transitions in MENA countries, which structures the transition process over time through the differentiation of a set of sub-sequent distinct phases, is developed in this article. The phase model builds on a phase model depicting the German energy transition, which was complemented by insights about transition governance and adapted to reflect characteristics of the MENA region. The resulting model includes four phases ("Take-off renewables", "System integration", "Power to fuel/gases”, "Towards 100% renewables”), each of which is characterized by a different cluster of innovations. These innovations enter the system via three stages of development which describe different levels of maturity and market penetration, and which require appropriate governance. The phase model has the potential to support strategy development and governance of energy transitions in MENA countries in two complementary ways: it provides an overview of techno-economic developments as orienting guidelines for decision-makers, and it adds some guidance as to which governance approaches are suitable for supporting those developments.
A policy mix for resource efficiency in the EU : key instruments, challenges and research needs
(2019)
Against the background of an often wasteful use of natural resources, the European Union has made resource efficiency a top policy priority. Policy formulation is, however, at a very early stage in many Member States, with often vague notions of what resource efficiency means, characterised by fragmented instruments and overlapping competencies. This paper develops a conceptual framework for defining, assessing and developing resource efficiency policy mixes. It argues that a mix of policies and instruments is best suited to overcoming the complex challenges of the 21st Century. Such a mix addresses multiple resource domains at a strategic, high level and contains interacting instruments targeting multiple actors, levels of governance and sectors and life-cycle stages of resource use. This paper looks at criteria for effective resource efficiency policy instruments, presents both an indicative policy mix across 9 policy domains and case studies (on environmental harmful subsidies, supply chain efficiency in food systems and product-service systems) and identifies key challenges to overcome trade-offs in instrument design, maximise synergies, reduce conflicts, promote coherence, coordinate activities and move from theory to practice. Research needs are discussed regarding who shall devise, implement, and coordinate such a policy mix, considering negotiating power, timing and complexity.
Citizen science is a transdisciplinary approach that responds to the current science policy agenda: in terms of supporting open science, and by using a range of science communication instruments. In particular, it opens up scientific research processes by involving citizens at different phases; this also creates a range of opportunities for science communication to happen This article explores methodological and practical characteristics of citizen science as a form of science communication by examining three case studies that took different approaches to citizens' participation in science. Through these, it becomes clear that communication in citizen science is "always" science communication and an essential part of "doing science".
This article reviews the literature on the past cost dynamics of various renewable, fossil fuel and nuclear electricity generation technologies. It identifies 10 different factors which have played key roles in influencing past cost developments according to the literature. These 10 factors are: deployment-induced learning, research, development and demonstration (RD&D)-induced learning, knowledge spillovers from other technologies, upsizing, economies of manufacturing scale, economies of project scale, changes in material and labour costs, changes in fuel costs, regulatory changes, and limits to the availability of suitable sites. The article summarises the relevant literature findings for each of these 10 factors and provides an overview indicating which factors have impacted on which generation technologies. The article also discusses the insights gained from the review for a better understanding of possible future cost developments of electricity generation technologies. Finally, future research needs, which may support a better understanding of past and future cost developments, are identified.
The production of commodities by energy-intensive industry is responsible for 1/3 of annual global greenhouse gas (GHG) emissions. The climate goal of the Paris Agreement, to hold the increase in the global average temperature to well below 2 °C above pre-industrial levels while pursuing efforts to limit the temperature increase to 1.5 °C, requires global GHG emissions reach net-zero and probably negative by 2055-2080. Given the average economic lifetime of industrial facilities is 20 years or more, this indicates all new investment must be net-zero emitting by 2035-2060 or be compensated by negative emissions to guarantee GHG-neutrality. We argue, based on a sample portfolio of emerging and near-commercial technologies for each sector (largely based on zero carbon electricity & heat sources, biomass and carbon capture, and catalogued in an accompanying database), that reducing energy-intensive industrial GHG emissions to Paris Agreement compatible levels may not only be technically possible, but can be achieved with sufficient prioritization and policy effort. We then review policy options to drive innovation and investment in these technologies. From this we synthesize a preliminary integrated strategy for a managed transition with minimum stranded assets, unemployment, and social trauma that recognizes the competitive and globally traded nature of commodity production. The strategy includes: an initial policy commitment followed by a national and sectoral stakeholder driven pathway process to build commitment and identify opportunities based on local zero carbon resources; penetration of near-commercial technologies through increasing valuation of GHG material intensity through GHG pricing or flexible regulations with protection for competitiveness and against carbon leakage; research and demand support for the output of pilot plants, including some combination of guaranteed above-market prices that decline with output and an increasing requirement for low carbon inputs in government procurement; and finally, key supporting institutions.
Concerns over climate change and the security of industrial feedstock supplies have been opening a growing market for biobased materials. This development, however, also presents a challenge to scientists, policy makers, and industry because the production of biobased materials requires land and is typically associated with adverse environmental effects. This article addresses the environmental impacts of biobased materials in a meta-analysis of 44 life cycle assessment (LCA) studies. The reviewed literature suggests that one metric ton (t) of biobased materials saves, relative to conventional materials, 55 ± 34 gigajoules of primary energy and 3 ± 1 t carbon dioxide equivalents of greenhouse gases. However, biobased materials may increase eutrophication by 5 ± 7 kilograms (kg) phosphate equivalents/t and stratospheric ozone depletion by 1.9 ± 1.8 kg nitrous oxide equivalents/t. Our findings are inconclusive with regard to acidification (savings of 2 ± 20 kg sulfur dioxide equivalents/t) and photochemical ozone formation (savings of 0.3 ± 2.4 kg ethene equivalents/t). The variability in the results of life cycle assessment studies highlights the difficulties in drawing general conclusions. Still, common to most biobased materials are impacts caused by the application of fertilizers and pesticides during industrial biomass cultivation. Additional land use impacts, such as the potential loss of biodiversity, soil carbon depletion, soil erosion, deforestation, as well as greenhouse gas emissions from indirect land use change are not quantified in this review. Clearly these impacts should be considered when evaluating the environmental performance of biobased materials.
Much of the current literature on climate clubs sees mitigation costs creating free rider incentives as the main problem of climate policy. Climate clubs are supposed to solve this problem by creating additional incentives for mitigation. Looking more in detail, one sees that the situation differs from sector to sector. Some industry sectors indeed have substantial cost and competitiveness issues. In others such as electricity and transport, there are costs at micro level but balance for economy and society as a whole is rather positive. International climate policy in general and clubs in particular should therefore be tailored to sectoral specifics.
This article develops a sectoral approach to the analysis of global climate governance. This approach advances the assessment of global climate governance by focusing on complexes of intergovernmental and transnational institutions co-governing key socio-technical sectoral systems. The actual and potential contribution of these sectoral institutional complexes to advancing decarbonization can be assessed according to five key governance functions: (1) providing guidance and signal to actors, (2) setting rules to facilitate collective action, (3) enhancing transparency and accountability, (4) offering support (finance, technology, capacity-building), and (5) promoting knowledge and learning. On this basis, we can assess the potential of international cooperation to address the challenges specific sectoral systems face in the climate transition as well as the extent to which existing sectoral institutional complexes deliver on this potential. This provides a solid starting point for developing options for filling identified gaps and enhancing the effectiveness of global climate governance.
A sectoral perspective on international climate governance : key findings and research priorities
(2021)
This concluding article derives six major findings from the contributions to this special issue. First, the barriers and challenges to decarbonisation vary significantly across sectoral systems. Second, and similarly, the need and potential for the five functions of international governance institutions to contribute to effective climate protection also vary widely. Third, while the pattern is uneven, there is a general undersupply of international climate governance. Fourth, the sectoral analyses confirm that the UNFCCC and Paris Agreement play an important overarching role but remain limited in advancing effective sectoral governance. Fifth, while non-environmental institutions may present important barriers to decarbonisation, more synergistic effects are possible. Sixth, our sectoral approach provides a sound basis on which to identify sector-specific policy options. The paper then offers reflections on the merits and limitations of the sectoral approach, before identifying avenues for future research to further advance the agenda.
A number of "roadmapping" activities are being carried out internationally with the aim of planning and facilitating transitions to hydrogen energy systems. However, there is an evident discrepancy between the treatment of quantitative and qualitative information in the majority of roadmapping efforts. Whilst quantitative information is frequently analysed in numerical and computational models, conversely qualitative information tends to be incorporated on a significantly more ad hoc basis. Previous attempts at incorporating qualitative considerations have not usually been systematised. In this paper we present a methodology aimed at increasing the rigour with which qualitative information is treated in hydrogen roadmapping activities. The key changes and actor mapping (KCAM) methodology was developed as the primary qualitative component of the European Hydrogen Energy Roadmap project "HyWays". KCAM, developed from a well known general systems development model, constitutes a means of qualitatively analysing variable hydrogen supply chains that is structured, systematic and flexible.
This thesis justifies and develops a sustainable level of Lifestyle Material Footprint (LMF) as a benchmark for designing sustainable lifestyles. It shows the application of the benchmark in a Household-level Sustainability Transition method and presents a framework for inspiring design solutions towards a Design for One Planet (Df1P).
The thesis shows how the Material Input per unit of Service (MIPS) concept has developed from product orientation to the application to household consumption and from technically-focused measurement into an integral part of methods for designing one-planet lifestyles and supporting solutions. This provides both an advanced application of the concept and its opening to new purposes and users.
The core of the thesis is the suggestion of a sustainable material footprint benchmark of 8 tonnes per person per year as a resource cap target for household consumption in Finland, an 80% (factor 5) reduction from present average. The 8 tonnes benchmark opens the possibility for a target-oriented, planned reduction of LMFs by target-setting, experimenting and up-scaling of sustainable solutions. The method enabled the participating households to perform footprint reductions of 26–54% during the one-month experiment phase. Notable footprint reductions are thus possible even in the short term, which is an important message to other households and other actors in society. Calculating households' LMFs makes visible the structures underlying household consumption and the need for change not only in household consumption but also in the supply of products, services and infrastructure, and thus systemic changes initiated by others than households.
The orientation framework of Df1P suggests measures that could be promoted by means of design, and structures them in a matrix incorporating priority action areas in the fields of housing, nutrition and mobility, and the domains of product design, service design, infrastructure planning and communication design. Mainstreaming sustainable lifestyles will potentially require a new design culture, but at least significant efforts in product design, service design and infrastructure planning as well as in making sustainable solutions attractive to consumers and disrupting existing routines. The more technology and infrastructure can be integrated into this change, the more space will be left for individual diversity in achieving sustainable household consumption. The orientation framework could provide a first step towards Df1P practice by inspiring designers to integrate the recognition of the planetary boundaries into their work.
The establishment of the Leveraging a Climate-neutral Society–strategic Research Network (LCS–RNet) (then named the International Research Network for Low Carbon Societies) was proposed at the Group of Eight (G8) Environment Ministers’ Meeting in 2008. Its 12th annual meeting in December 2021 focused on the discussion on how to transition into a just and sustainable society and how to reduce the risks associated with the transition. This requires comprehensive studies including on the concept of transition, pathways to net-zero societies and how to realise the pathways by collaborating with various stakeholders. This Special Feature provides new insights into sustainability science by linking the scientific knowledge with practical science for the transition through the exploration of studies presented at the annual meeting. Following the opening paper, "A challenge for sustainability science: can we halt climate change?", a wide range of topics were discussed, including practices for sustainable transformation in the Erasmus University, practices in industry, energy transition and international cooperation.
Accelerating circular economy solutions to achieve the 2030 agenda for sustainable development goals
(2022)
Circular economy seems a vital enabler for sustainable use of natural resources which is also important for achieving the 2030 agenda for sustainable development goals. Therefore, a special session addressing issues of "sustainable solutions and remarkable practices in circular economy focusing materials downstream" was held at the 16th International Conference on Waste Management and Technology, where researchers and attendees worldwide were convened to share their experiences and visions. Presentations focusing on many key points such as new strategies, innovative technologies, management methods, and practical cases were discussed during the session. Accordingly, this article compiled all these distinctive presentations and gave insights into the pathway of circular economy towards the sustainable development goals. We summarized that the transition to circular economy can keep the value of resources and products at a high level and minimize waste production; the focus of governmental policies and plans with the involvement of public-private-partnership on 3Rs (reduce, reuse, and recycle) helps to improve the use of natural resources and take a step ahead to approach or achieve the sustainability.
"Sufficiency" is beginning to emerge as a new value throughout Western societies and the question asked in this article is: Can we observe cases with actual opportunities to link successful business strategies of incumbents to principles of sufficiency? Thus, how feasible is sustainable entrepreneurship for incumbents? As an innovative conceptual approach, it will be analyzed how brand claims function as narrative translation mechanisms in situations where tensions emerge between corporate narratives and unexpected societal trends, e.g. the emergence of sufficient lifestyles. It will be shown that even though these are still a niche phenomenon, a focus on powerful brands and the narratives connected to them are an important element in understanding the role of incumbents in transitions to sustainability.
The need for recycling obsolete mobile phones has significantly increased with their rapidly growing worldwide production and distribution. Return and recycling rates are quite low; people tend to keep old, unused phones at home instead of returning them for recycling or further use because of a lack of knowledge and acceptance of return programmes. Thus far, individual use and recycling behavior has not shown any trend towards more sustainable patterns. Consequently, an increased awareness is needed for the high environmental and social impact throughout the whole value chain of a mobile phone - there is simply a lack of information and knowledge regarding sustainability issues around the mobile phone. A teaching material was therefore developed in a German research project, based on the concept of the ecological rucksack, presenting comprehensive information about the value chain of a mobile phone. Its application in different schools led to an increased awareness and interest among pupils for the connection between sustainability, resources and mobile phones. Based on these research results, this paper analyses young people’s knowledge of sustainability issues linked to their mobile phones and their acceptance of more sustainable behavioral patterns regarding their mobile, including return and recycling programmes.
The need of recycling obsolete mobile phones has significantly
increased with the worldwide propagation of mobile phones and
their inherent rapid turnover. In this article, we examine the
acceptance of mobile phone return programs by using the
Technology Acceptance Model and multiple case studies. Our
findings can provide valuable recommendations for the setup of
future mobile phone return programs.
Securing universal access to electricity by using renewable energy sources is technically feasible. A broad range of technological options, which can meet almost any requirements, are available. Solutions can comprise the connection of users to large distribution networks (on-grid solutions) or the application of power supply systems that can operate autonomously (off-grid and mini-grid solutions). This brochure concentrates on the latter solutions; technologies for large-scale distribution are not covered.
Accounting for the social dimension of sustainability : experiences from the biotechnology industry
(2006)
Accounting for the social dimension of sustainability proves to be a challenge for corporate practitioners, due to its intangible, qualitative nature and lack of consensus on relevant criteria. We suggest a semi-quantitative approach based on stakeholder involvement to identify relevant aspects for a sector specific assessment of the social dimension. Our case study on biotechnology illustrates that the dialogue with internal and external stakeholders enabled the creation of a key performance indicator (KPI) set to account for social sustainability in the early design stages of biotechnological processes and product development. Indicators for eight aspects are identified for the social assessment: health and safety, quality of working conditions, impact on employment, education and training, knowledge management, innovation potential, customer acceptance and societal product benefit, and social dialogue. We describe the integration of the KPI set in a software application, tailor made for practitioners of the sector, and highlight first user experiences.
Article 6.4 of the Paris Agreement establishes a new mechanism for Parties to cooperate in achieving their nationally determined contributions (NDCs). One key innovation of the Article 6.4 mechanism is its objective to "deliver an overall mitigation in global emissions" (Art. 6.4(d)). This report develops recommendations on how to implement this objective. A key difficulty lies in the fact that even basics of how the mechanism is supposed to function have so far not been clarified by the Parties. The report therefore first sketches out what has so far been agreed and discussed on the mechanism’s activity cycle. Second, as the concept of overall mitigation has so far also not been clearly defined by Parties, the report derives a working definition from the language that was agreed in the Paris Agreement. In the next step, the report provides a survey of the options to achieve overall mitigation that have so far been discussed in the relevant literature and in the Article 6 negotiations. Many of these options were developed in the context of the Kyoto mechanisms. The report therefore discusses to what extent the options are also applicable under the Paris Agreement or whether adjustments need to be made. In the following, the options that are applicable under the Agreement are assessed on the basis of a number of criteria. The report concludes with a summary of the main findings and recommendations.
Nigeria is Africa's largest economy and home to approximately 10% of the un-electrified population of Sub-Saharan Africa. In 2017, 77 million Nigerians or 40% of the population had no access to affordable, reliable and sustainable electricity. In practice, diesel- and petrol-fuelled back-up generators supply the vast majority of electricity in the country. In Nigeria's nationally-determined contribution (NDC) under the Paris Agreement, over 60% of the greenhouse gas emissions (GHG) reductions are foreseen in the power sector. The goal of this study is to identify and critically examine the pathways available to Nigeria to meet its 2030 electricity access, renewables and decarbonization goals in the power sector. Using published data and stakeholder interviews, we build three potential scenarios for electrification and growth in demand, generation and transmission capacity. The demand assumptions incorporate existing knowledge on pathways for electrification via grid extension, mini-grids and solar home systems (SHS). The supply assumptions are built upon an evaluation of the investment pipeline for generation and transmission capacity, and possible scale-up rates up to 2030. The results reveal that, in the most ambitious Green Transition scenario, Nigeria meets its electricity access goals, whereby those connected to the grid achieve a Tier 3 level of access, and those served by sustainable off-grid solutions (mini-grids and SHS) achieve Tier 2. Decarbonization pledges would be surpassed in all three scenarios but renewable energy goals would only be partly met. Fossil fuel-based back-up generation continues to play a substantial role in all scenarios. The implications and critical uncertainties of these findings are extensively discussed.
Achieving sustainable mobility in developing countries : suggestions for a post-2012 agreement
(2009)
In December 2009, countries meet in Copenhagen to establish a new global climate agreement. This article links the need for reducing transport-related greenhouse gas emissions in developing countries with the current international climate negotiations. Arguing that a sustainable transport approach requires comprehensive policy packages, it assesses the suitability of current climate negotiation proposals in promoting sustainable transport. The project-based approach under the current climate regime incentivises neither comprehensive sustainable transport and mobility policies, nor sufficient numbers of local projects. Current proposals to increase efforts by developing countries, to reform the Clean Development Mechanism, and to create new emission trading mechanisms are promising but still have to overcome several obstacles. One obstacle involves how to properly assess the impact of actions while maintaining streamlined procedures. The authors conclude from their analysis that the best way forward would be to establish an international mitigation fund with a dedicated transport window financed by industrialised countries. This fund would enable developing countries to implement national policies and local projects. Developing countries would outline low-carbon development strategies, including a sectoral strategy for low-carbon transport.
Actor and network analysis
(2017)
The main objective of AIRP-SD was to address the urgent need to stimulate innovation in Research, Technological development and Demonstration (RTD) processes in order to enhance the prospects of RTD contributing positively to processes and strategies leading to radical improvements in the sustainability of production-consumption systems. This Milestone One Report was the first of three status reports, summarising the interim findings of the first three work packages since the start of the project in January 2002.
Variations in quantity, quality and time availability of input materials pose a major risk to circular supply chains (CSC) and require new models for creating and evaluating adaptive and resilient CSC in the circular economy (CE). This can be achieved through consistent modelling of the overarching relationship between resource input- and output streams, without neglecting the associated risks.
The model proposed below consists of five components based on five resilience requirements for supply-chains (SCs). It provides a data-based recommended course of action for managers with a low entry-barrier. It consists of a CSC visualization, safety stock calculation, risk monitoring for each SC node, reporting logic, and a measurement catalogue. The inspiration for this model came from an innovative case study ("Zirkelmesser") in the metal processing industry, where secondary products and materials are used to produce new products. Here, the problem of maintaining the resource supply arose and led to resilience issues. The mentioned case study serves as an application example for the model application and contributes to making emerging circular supply chains predictable and more controllable, thus increasing their resilience.
This policy paper reviews the concept of additionality in the context of the Paris Agreement. Additionality is a key criterion that helps to maintain the environmental integrity of the Paris Agreement, especially when units created under Article 6.2 or 6.4 are used for offsetting purposes whether that is by Parties in order to meet their NDCs or whether by other entities with legal mitigation obligations.
It does so by first reviewing key concepts such as offsetting, environmental integrity, and baseline. Subsequently, it explores the context of additionality under the Paris Agreement. More specifically it discusses what should be counted as the baseline for additionality demonstration. The subsequent chapter then highlights the challenges with establishing additionality, that is establishing a causal relationship between a policy intervention and a proposed activity. Finally, the Policy Paper discusses aspects of international governance with respect to additionality.
Additionality revisited : guarding the integrity of market mechanisms under the Paris agreement
(2019)
The Paris Agreement requires mitigation contributions from all Parties. Therefore, the determination of additionality of activities under the market mechanisms of its Article 6 will need to be revisited. This paper provides recommendations on how to operationalize additionality under Article 6. We first review generic definitions of additionality and current approaches for testing of additionality before discussing under which conditions additionality testing of specific activities or policies is still necessary under the new context of the Paris Agreement, that is, in order to prevent increases of global emissions. We argue that the possibility of "hot air" generation under nationally-determined contributions (NDCs) requires an independent check of the NDC's ambition. If the NDC of the transferring country does contain "hot air", or if the transferred emission reductions are not covered by the NDC, a dedicated additionality test should be required. While additionality tests of projects and programmes could continue to be done through investment analysis, for policy instruments new approaches are required. They should be differentiated according to type of policy instrument. For regulation, we suggest calculating the resulting pay-back period for technology users. If the regulation generates investments exceeding a payback period threshold, it could be deemed additional. Similarly, carbon pricing policies that generate a carbon price exceeding a threshold could qualify; for trading schemes an absence of over-allocation needs to be shown. The threshold should be differentiated according to country categories and rise over time.
Addressing opportunities and challenges of a sectoral approach to the Clean Development Mechanism
(2005)
New energy efficiency policies have been introduced around the world. Historically, most energy models were reasonably equipped to assess the impact of classical policies, such as a subsidy or change in taxation. However, these tools are often insufficient to assess the impact of alternative policy instruments. We evaluate the so-called engineering economic models used to assess future industrial energy use. Engineering economic models include the level of detail commonly needed to model the new types of policies considered. We explore approaches to improve the realism and policy relevance of engineering economic modeling frameworks. We also explore solutions to strengthen the policy usefulness of engineering economic analysis that can be built from a framework of multidisciplinary cooperation. The review discusses the main modeling approaches currently used and evaluates the weaknesses in current models. We focus on the needs to further improve the models. We identify research priorities for the modeling framework, technology representation in models, policy evaluation, and modeling of decision-making behavior.
More and more countries are incorporating the instrument of emissions trading into their national climate policies. This emerging mosaic of emissions trading schemes (ETS) raises the question of whether they should be linked with each other. From an economic point of view, linking of domestic schemes is supposed to increase the economic efficiency of carbon markets. In addition, linking is also expected by some to yield substantial political benefits in terms of the evolution of the UNFCCC/Kyoto regime. However, these optimistic prospects are based on a best-case scenario where all major countries establish environmentally effective emissions trading systems and then link them with each other. Real-life politics might develop rather differently. This paper therefore examines to what extent the current status of emissions trading in industrialised countries provides a basis for reinforcing and moving forward the international climate regime through linking domestic ETS. After comparing emerging emissions trading schemes from an institutional perspective, it emerges that not only emissions trading is at a very early stage in most countries, in addition the emerging systems are probably going to be designed very differently from the EU ETS. While for some design features such as the coverage design differences do not matter, there are some areas where the plans in many non-EU countries look crucially different from the EU system. The outlook for a linked international ETS is therefore currently still very uncertain. Given this state of affairs, the EU should pro-actively engage with the non-EU countries to try to harmonise their developing national emissions trading schemes with the EU ETS, widely disseminate the lessons it has learned from the EU ETS, strongly make the case for environmental integrity and at the same time make clear that systems that want to link to the EU ETS will need to meet certain quality criteria.
Urban transitions and transformations research fosters a dialogue between sustainability transitions theory an inter- and transdisciplinary research on urban change. As a field, urban transitions and transformations research encompasses plural analytical and conceptual perspectives. In doing so, this field opens up sustainability transitions research to new communities of practice in urban environments, including mayors, transnational municipal networks, and international organizations.
Heating behavior of households is key for reducing domestic energy demand and mitigating climate change. Recently, various technical devices have been developed, providing households with feedback on their heating behavior and supporting energy conservation behavior.
The impact of such devices on overall energy consumption depends on (1) the impact of a device within a household, (2) the diffusion of devices to other households and the number of adopters, and (3) the diffusion of the induced behavioral change beyond these households. While the first two processes are currently established in assessments of sustainable household devices, we suggest that adding behavior diffusion is essential when assessing devices that explicitly target behavioral change. We therefore propose an assessment framework that includes all three processes. We implement this framework in an agent-based model by combining two existing simulation models to explore the effect of adding behavior diffusion. In three simulation experiments, we identify two mechanisms by which behavior diffusion (1) spreads the effect of such devices from adopters to non-adopters and (2) increases the average speed of behavioral change of households. From these results we conclude that behavior diffusion should be included in assessments of behavior-changing feedback devices.
In this paper three approaches on transitions pathways are combined to study the role of agricultural nature conservation in the Dutch land use domain for achieving internationally agreed climate and biodiversity targets. The three perspectives used are the Multilevel Perspective (MLP), Initiative Based Learning (IBL) and Integrated Assessment Modelling (IAM). The analysis provides insights in how the combination of different research approaches can lead to more comprehensive policy advice on how agricultural nature conservation could help to achieve internationally agreed sustainability goals related to climate change and biodiversity. IAM shows under which conditions agricultural nature conservation could be consistent with European and global long-term goals regarding food security, biodiversity and climate. MLP provides insight into the extent in which agricultural nature conservation has affected or changed the existing nature and agricultural regimes. IBL, finally, reveals the challenges of encouraging agricultural nature conservation with policy measures. Our analysis shows that a combined perspective provides a deeper understanding of the underlying processes, reasons and motives of agricultural nature conservation, leading to more comprehensive policy recommendations.
Air emissions accounts
(2010)