Refine
Year of Publication
- 2015 (111) (remove)
Document Type
- Peer-Reviewed Article (32)
- Conference Object (20)
- Report (20)
- Working Paper (12)
- Part of a Book (11)
- Contribution to Periodical (10)
- Doctoral Thesis (5)
- Book (1)
Language
- English (111) (remove)
Urbanization and climate change are amongst the greatest challenges of the 21st century. In the "Low Carbon Future Cities" project (LCFC), three important problem dimensions are analysed: current and future GHG emissions and their mitigation (up to 2050); resource use and material flows; and vulnerability to climate change.
The industrial city of Wuxi has been the Chinese pilot city of the project. To establish the pathway for a low carbon future, it is crucial to understand the current situation and possible future developments. The paper presents the key results of the status quo analysis and the future scenario analysis carried out for Wuxi. Two scenarios are outlined. The Current Policy Scenario (CPS) shows the current most likely development in the area of energy demand and GHG emissions until 2050. Whereas the extra low carbon scenario (ELCS) assumes a significantly more ambitious implementation, it combines a market introduction of best available technologies with substantial behavioural change. All scenarios are composed of sub-scenarios for the selected key sectors.
Looking at the per capita emissions in Wuxi, the current levels are already high at around 12 tonnes CO2 per capita compared to Western European cities. Although Wuxi has developed a low carbon plan, the projected results under current policies (CPS) show that the total emissions would increase to 23.6 tonnes CO2 per capita by 2050. If the ELCS pathway was to be adopted, these CO2 emission levels could be reduced to 6.4 tonnes per capita by 2050.
A future-oriented and sustainable "Leasing Society" is based on a combination of new and innovative serviceoriented business models, changed product and material ownership structures, increased and improved eco-design efforts, and reverse logistic structures. Together these elements have the potential to change the relationship between producers and consumers, and thereby create a new incentive structure in the economy regarding the use and re-use of resources. While the consumer in a leasing society buys a service (instead of a product), the producer in a leasing society retains the ownership of the product (instead of selling it) and sells the service of using the product. This creates producer incentives to re-use, remanufacture, and recycle products and materials and could become a cornerstone of the circular economy, depending on how the leasing society is implemented. While a predominantly positive picture of the success of a leasing society model and related business cases emerges from the bigger part of the available literature, this paper argues that the resource efficiency of respective business cases is highly dependent on the specific business case design. This paper develops a more cautious and differentiated definition of the leasing society by discussing relevant mechanisms and success factors of leasing society business cases. The leasing society is discussed from a micro business-oriented and a macro environment-oriented perspective complemented by a discussion of conditions for successful business models that reduce environmental impacts and resource footprints.
A key challenge of the 21st century is to transform society into one that features sustainable patterns of production and consumption. To achieve this, transition processes need to be designed in key areas such as housing, mobility and nutrition. The design and large-scale implementation of sustainable product service systems (PSS) is regarded a promising approach for sustainability transitions. Real-life socio-technical experiments are an important infrastructure for designing PSS in collaboration with stakeholders and users. In this paper, we argue that transdisciplinary and action research methods are required for institutionalising an experimental set-up and developing PSS within such infrastructures. We present the Sustainable LivingLabs (SLL) research infrastructure and its methodology as an example of such experimental settings. It was collaboratively developed with key stakeholders in three consecutive research projects and applied to e.g. heating and space heating. We show new qualities of SLL in relation to existing LivingLabs and approaches for PSS design and present its methodological three-phase model (insight research, prototyping, field testing) of research. Our article contributes to knowledge on a methodological framework and tool-kit for PSS development in SLL with a clear focus on socio-ecological sustainability. Intermediate findings confirm the high influence of user practices on heating energy consumption and show starting points for PSS development: e.g. transformational products, home-automation combined with consulting along value chains. We hypothesise that developing PSS in user- and stakeholder-integrated settings supports acceptance and diffusion and, by taking into account users' social practices of utilising novelties, reduces rebound effects caused by incorrect application.
Urban GHG emissions and resource flows : methods for understanding the complex functioning of cities
(2015)
This paper sums up the recent developments in concepts and methods being used to measure the impacts of cities on environmental sustainability. It differentiates between a dominant trend in research literature that concentrates on the accounting and allocation of greenhouse gas (GHG) emissions and energy use to cities, and a re-emergence of studies focusing on the direct and indirect urban material and resource flows. The availability of reliable data and standard protocols is greater in the GHG accounting field and continues to grow rapidly.
Market mechanisms - the Clean Development Mechanism (CDM), Joint Implementation (JI) and Art. 17 emission trading - have been a central feature of the Kyoto Protocol. The Parties to the United Nations Framework Convention on Climate Change (UNFCCC) intend to adopt a new comprehensive climate agreement at this year's Conference of the Parties (COP) in Paris. The shape of the new agreement is emerging only slowly, including the role market mechanisms will play.
To gauge the potential scope of market mechanisms in the forthcoming Paris agreement, this paper surveys the submitted INDCs on the question to what extent they envisage the use of market mechanisms. In detail, the paper looks at five questions for each INDC:
- Does the INDC make any mention of market mechanisms?
- Does the Party plan to use market mechanisms to achieve its contribution to the Paris agreement?
- If a Party intends to use market mechanisms, does the INDC specify which mechanisms or types of units the country intends to use?
- Does the Party quantify the extent to which it intends to use market mechanisms? Under the Kyoto Protocol, use of mechanisms has been supposed to be supplemental to domestic action, though this principle has never been quantified.
- Does the Party specify how the use of mechanisms will ensure environmental integrity and avoid double counting?
At COP 17 Durban, parties decided to establish a centralised new market-based mechanism (NMM) and to consider establishing a "framework for various approaches" to govern decentralised initiatives. Parties have also discussed possible use and up-scaling of non market based approaches (NMA) in this context. This Policy Brief summarises the state-of-play regarding the submissions by parties and observers as of Jan 2015. It is an update on previous JIKO policy papers and therefore focuses on comparable aspects of the discussion.
For a long time, water shortages and flooding have been challenges in many parts of China. Meanwhile, the Chinese government announced the change of water management from engineering-oriented approach towards integrated approach in the last decades. However, the announced changes in management approach does not necessarily lead to the wide implementation of institutions, infrastructures and practice. They can be confronted by a strong resistance from the existing management approach. In fact, the development of water resources management is a complex process. Such a complexity raise the following questions: did fundamental changes really take place in the structure of water supply and demand management and flood management in China? If yes, how? In order to answer this question, the author (1) developed conceptual frameworks to enable a detailed and precise analysis of regime development; (2)applied the elaborated conceptual frameworks to explore the development of the water resources management regime in China, at the example of three case studies. These three case studies were: - Flood Management (IFM) took place in the Dongting Lake Area in the middle Yangtze River, - Water allocation in the Yellow River Basin, - The experimentation period of Water Saving Society in China. With the support of the developed framework, the case studies show that fundamental changes, i.e. transitions, have taken place in flood management regime and water supply-demand regime in China, but transitions have not yet completed, due to, namely, the lack of reconfiguration of other regime components and other relevant regimes. In addition, the case studies also depict how the start of transitions were triggered and how informal learning processes influenced regime development. The thesis contributed to sustainability transitions research by developing an operational approach to analyze transitions of water resource management regime and by expanding the empirical basis for transitions research to natural resources management regime in emerging economies.
Questions regarding the societal impact of research, how to reach impact and what is needed to stabilize the effects are rising from various sides. Societal impact is seen as part of a social contract that exists between science and society. This entails that research must address pressing social issues which in turn implies a number of core challenges such as gathering evidence or the creation of actionable knowledge. The transdisciplinary research approach "real-world laboratory" is discussed as possible way to address and to overcome some of the challenges. A "real-world laboratory" currently being established in the city of Wuppertal serves as case study, linking conceptual and empirical investigations.
There is general agreement that preventing dangerous climate change requires a fundamental transformation of the global economy. Regarding carbon markets, the EU, for example, has called for the new market-based mechanism (NMM) to be established under the UNFCCC to "facilitate transition towards low carbon economy and attract further international investment". This JIKO Policy Paper discusses the transformative potential of the NMM and how it should be structured to maximize transformative impact.
The analysis shows that details in the arrangements of the scheme, such as allocation of allowances can significantly influence the incentive structure of the instrument and hence its potential to contribute to transformational change. The authors conclude that carbon pricing is necessary but is by itself not sufficient to redeem the various types of market failures that have led to the unsustainable global socio-economic system we are deemed to change. An NMM should therefore be tailored to complement other national policies.
Social innovations, which transform resource intensive routines and practices into low-resource ones, combined with socio-technically designed transition paths, which are created around sustainability and environmental criteria, are milestones for implementation and diffusion of SCP (Sustainable Consumption and Production). This paper analyses such processes based on eight key components in order to evaluate and explain transformation and transition towards a sustainable lifestyle. Actors on all levels of society are included in this approach, creating a whole framework. Global megatrends, such as climate change, demographic change or resource scarcity will be put into relation with current policies and production trends, which play an important role for the development of transition pathways and future scenarios. This will enable us to work out guidelines and ideas on how to create a more sustainable society specifically.
The transition towards a circular economy is high on the political agenda and support for innovative business models can be seen as one of the key strategies for its implementation. Nevertheless most of these business models rely on an increasing generation of waste and thus undermine the prevention of waste as top of the waste hierarchy. The paper aims to link this debate to more systemic eco-innovations that offer economic market potentials by reduced material inputs and waste generation. This directs the attention to sufficiency strategies that surpass the level of individual consumer choices and regards the potentials of entrepreneurial sufficiency strategies. It takes the example of waste contracting modelsin Germany as a possible approach of resource-light business models that provide existing utility aspects with altered consumption patterns and decreased resource consumption. It describes environmental and economic benefits and draws conclusions on necessary policy framework conditions.
After a wave of privatizations in the end of the 1990s, the electrical power supply of many municipalities in Germany has been returned into public hands. Many municipalities discover chances and possibilities for local action, which arise with remunicipalisation. The local policy-makers realize that remunicipalisation offers the opportunity of implementing an independent energy policy at local level which is critical in creating a transformation to a sustainable energy system based on energy efficiency and renewable energies. The municipal ownership allows a strong governance towards more political influence in the local energy market. In addition, there is a clear opinion of the population: 81 % of citizens surveyed say they trust their local municipal utility, compared to only 26 % who say they trust corporations (VKU-Survey, 2010). In summary, there are many good reasons for local politicians to establish their own municipal utilities. The payback for municipalities is tangible when the local utility focuses on reliably providing affordable energy rather than on increasing its returns. The new municipal power utilities stimulate competition and contribute to the renewal / restructuring of the traditional energy market.
The founding of 72 municipal utilities since 2005 leads us to ask for the reasons. The study reviews the German trend towards municipal ownership of local utilities, assessing their performance based on 10 targets related to the energy transition, climate protection, and the local economic impact: 1. Achieving environmental objectives and organization of the local "Energiewende". 2. Higher local added value. 3. Harnessing tax regulations for improving municipal services. 4. Improving the income situation of the city. 5. Democratization of supply and stronger orientation towards the common good (public value). 6. Creating and protecting good jobs. 7. Acting in social responsibility in energy supply. 8. Expansion of eco-efficient energy services. 9. Harnessing customer relations and public image. 10. Materialising synergies with other sectors.
Based on expert opinions, the study finds out that the likelihood of these targets being reached is "high to very high". The aim of this article is to provide a compact and basic understanding of the possible reasons for the phenomenon of remunicipalisation.
Limiting global warming to below 2 °C or even 1.5 °C requires a fundamental transformation of global socio-economic systems. This need for transformation has been taken up by international climate policy. This article synthesizes criteria of transformational change from transition research and climate finance agencies. On this basis, the article conducts a multi-criteria evaluation of the transformative potential of the European Union Emissions Trading Scheme (EU ETS), currently the world's largest market-based climate policy. From this case it can be inferred that emissions trading can "destabilize" incumbent high-emission practices, but its effectiveness in fostering innovation is limited. Furthermore, the analysis shows that details in the arrangements of the scheme such as allocation rules can have a strong detrimental impact on its outcome. If a global carbon market with a uniform price were introduced, this could lead to developing countries "buying in" with large amounts of freely allocated allowances. This, however, has been shown to thwart transformational effects and instead contribute to further carbon lock-in.
The role of gender concerns in the planning of small-scale energy projects in developing countries
(2015)
The bioeconomy is gaining growing attention as a perceived win-win strategy for environment and economy in the EU. However, the EU already has a disproportionately high global cropland footprint compared to the world average, and uses more cropland than domestically available to supply its demand for agricultural products. There is a risk that uncontrolled growth of the bioeconomy will increase land use pressures abroad. For that reason, a monitoring system is needed to account for the global land use of European consumption. The aim of this paper is to take a closer look at the tools needed to monitor global cropland footprints, as well as the targets needed to benchmark development. This paper reviews recent developments in land footprint accounting approaches and applies the method of global land use accounting to calculate the global cropland footprint of the EU-27 for the years between 2000 and 2011. It finds a slight decrease in per capita cropland footprints over the past decade (of around 1% annually, reaching 0.29 ha/cap in 2011) and advocates promoting a further decrease in per capita cropland requirements (of around 2% annually) to reach global land use targets for keeping consumption within the safe operating space of planetary boundaries by 2030. It argues that strategic land reduction targets may still go hand in hand with the growth of a smart, innovative and sustainable bioeconomy by reinforcing the need for policies that support greater efficiency across the life-cycle and reduce wasteful and excessive consumption practices. Recommendations for further improving land footprint accounting are given.
How can renewable energy sources be efficiently integrated into the North African electricity systems? By using techno-economic modeling methods, this book explores optimized electricity system expansion pathways until the year 2030 for the five North African countries - Morocco, Algeria, Tunisia, Libya and Egypt. The results indicate that renewable energy integration is actually a viable business case for the entire region, if wind and solar capacities are properly planned in conjunction with the conventional generation system and under consideration of the country-specific electricity supply-/demand patterns. Further aspects featured in this publication are the impact of renewable power on the transnational electricity transmission system and the question how decision making processes about renewable energy strategies can be improved in the North African context. The book is a contribution to the scientific literature about energy issues in the Middle East and North Africa (MENA), but also seeks to address political and industrial practitioners concerned with the development of the region's renewable energy future.
The German "Energiewende" (energy transition) is meant to be a contract between generations. The rebuilding of the whole energy system is designed and financed today in order to safeguard our children and grandchildren against fundamental risks: the enormous economic, social and environmental costs of a fossil-nuclear energy system, the risks of the nuclear fuel-cycle and the impacts of climate change, as well as energy import dependency, price shocks and geopolitical disputes over scarce resources. In contrast, a successful Energiewende creates new business areas and qualified jobs and increases competitiveness in the "green race" - in particular on the lead markets for efficiency technology and renewable energy. Accordingly, the Energiewende is described in this book as the collective effort of post-war German history and as a unique learning arena for a positive socio-economic transformation with international relevance. The book covers the formation of both the social and scientific Energiewende consensus, quantitative scenarios, the state of the Energiewende in 2015, the need for further policy intervention - in particular with respect to energy efficiency, and not least the integration of efficiency, sufficiency and renewable energy policies.
The electric utility sector in Australia, Germany and the U.S. are all going through major changes driven by declining sales, increasing use of distributed energy sources and policy responses to global climate change. This paper discusses efforts in each of these countries to reform their electric industries, address climate change and promote energy efficiency. Going forward, we see a role for government, utilities and private market energy efficiency efforts in all three countries, although the emphasis will vary by country and will evolve over time. Where all three parties can work together with a common vision, reform efforts are likely to be more successful and more sustained. In all three countries the future is uncertain. In the face of this uncertainty, energy efficiency supporters need to keep abreast of these changes, and find more flexible and nimble policy strategies for energy efficiency to prosper, as the future is likely to unfold in unexpected ways.
Considerable efficiency gains can be made costeffectively to set the transport sector on a sustainable development pathway. They can be achieved through already available technologies and practices, which will not only reduce greenhouse gas emissions significantly, but also generate social, environmental and economic co-benefits. However, progress in the take-up of low-carbon mobility measures substantially lags behind the potential. A number of barriers contribute to this lack of uptake. This paper explores those barriers by focusing on vehicle fuel efficiency in particular, but will also touch on the wider policy framework to improve the efficiency of the transport sector and reduce emissions. The paper suggests that a combination of fuel pricing, differentiated vehicle taxation, vehicle standards and the provision of modal choice are necessary to minimise rebound effects and significantly curb transport sector greenhouse gas emissions at low- or even negative cost.
Technical summary
(2015)
The book shows that the implementation of a sustainable energy strategy in Iran provides the opportunity for further economic and social development. In this context, the aim of the book is to provide some of the analyses needed to rethink the country’s energy strategy and to grasp the chances. The authors hope to make a contribution to the emerging and rapidly growing discussion on better energy alternatives and the respective opportunities for investment, innovation and modernization. The work presented in the book should provide ideas for such opportunities and create a vision of how this could contribute towards developing a more sustainable, efficient and prosperous future energy system for Iran.
The book is based on long-term academic cooperation between Iranian researchers from several universities and the Iranian Energy Association and German researchers from the Wuppertal Institute, Büro Ö-quadrat and the University of Osnabrück. The book in hand is an important result of the collaboration. So its publication lends itself to taking stock of these twelve years of continued cooperation.
To live a life of sufficiency in a consumerist culture may be one of the most ambitious experiments an individual could undertake. To investigate this challenge, we employed a social-practice approach. This article is based on 42 qualitative interviews asking respondents why and how they acted in a sufficient way within a Western infrastructure and culture. The results indicate that sufficiency-oriented people draw on particular meanings in everyday-life practices when adopting relevant resource-extensive actions. These understandings encompass an amalgam of environmentally friendly attitudes, positive social intentions, and/or personal commitments to thriftiness. We further identified a set of specific practices - including sharing, recycling, and reusing - as useful for the adoption of a sufficient lifestyle. For our respondents, many of these sufficiency practices occurred regularly in daily life and were rarely questioned. Using an additional survey, we show that these routines lead to less resource-intensive lifestyles and demonstrate how a small group of people has been able to habitually adopt sufficiency practices. However, the majority does not see a need for more frequent implementation of such routines because daily decision-making processes are widely focused on the consumption of products.
This study conducted by Wuppertal Institute and Germanwatch explores how the social pillar of sustainability at the local level could be met in Concentrated Solar Power (CSP) projects. For this purpose, the authors evaluate the livelihood dimension of CSP technology based on a case study conducted on the 160 MW pilot CSP plant Nooro I in Ouarzazate, Morocco.
Market mechanisms - the Clean Development Mechanism (CDM), Joint Implementation (JI) and Art. 17 emission trading - have been a central feature of the Kyoto Protocol. The shape of the new climate change agreement to adopted at this year's UN climate change conference in Paris is emerging only slowly, including the role market mechanisms will play. In order to assess the potential scope of market mechanisms in the Paris agreement, this JIKO Policy Brief surveys the intended nationally determined contributions (INDCs) to the new agreement which countries have so far submitted. The paper is now available for download.
The Parties to the United Nations Framework Convention on Climate Change (UNFCCC) intend to adopt a new comprehensive climate agreement at this year's Conference of the Parties (COP) in Paris. The shape of the new agreement is emerging only slowly, including the role market mechanisms will play. A new JIKO Policy Brief assesses the potential scope of market mechanisms in the Paris agreement by surveying the Intended Nationally Determined Contributions (INDCs) so far.
Critical metals are in great demand by the electrical and electronics industry, so waste electrical and eletronic equipment represents a significant source of secondary raw materials. Owing to low recycling rates and the concomitant supply risks associated with critical metals, the closure of the material cycles is highly relevant to the German economy. Losses of these metals occur from collection until their material recovery, along the entire disposal chain of waste electrical and electronic equipment. This paper develops planning criteria for the design of collection groups to achieve higher recovery amounts of such metals. The aim is to clarify what amounts of metals exist, both product-specific and on the market, how the dismantling of the products is constructed and how collection groups can be arranged with planning criteria oriented towards resource conservation. The analysis is a snapshot using the example of indium and selected products. A procedure is presented and findings identified which are transferable to various critical metals and to waste electrical and electronic equipment. The results show that grouping of products according to resource amounts and the dismantling effort enables forward-looking and resource-efficient planning of the treatment of every single collection group.
For 20 years, the number of resource policy approaches with direct and indirect relations to raw materials, resource and material efficiency has grown enormously at national and international level. This discussion paper makes an inventory of different political and regulatory approaches that contain a direct or indirect reference to resources such as construction materials, industrial minerals, or metals. They are examined and evaluated regarding foci and resource priorities as well as further categories such as target lines, governance levels, indicators used, integration into wider target systems, specification, and implementation. The aim is to provide an overview of the spectrum of resource objectives in international, European, and national strategies, programs, and initiatives. The closer analysis of raw material targets embedded in the policy programs and legal approaches reveals that most goals lack a time frame and a concrete vision, thus remain at a strategic level. To complement the overview, the state of research in the field of modeling and simulation is briefly discussed. Concluding remarks concerning their relation to the objectives identified and the task of target setting complete the discussion.
Prospects for the integration of power markets and the expansion of renewable energy have recently triggered a number of publications dealing with transformation scenarios of the North African electricity systems. This paper compares five studies using economic electricity supply- and demand models to assess possible development pathways of the North African power systems from today until 2030 and 2050. The analysis shows that distinct modeling methodologies as well as different approaches to scenario design and parameter assumptions can strongly influence the studies' results, leading to very heterogenous projections of North Africa's power generation structures as well as the patterns of electricity exchange with other regions, like Europe. Common findings of the studies are that the surplus costs of capital-intensive renewable energy expansion in North Africa can in most cases be offset by avoided fuel costs and avoided investments in conventional power plants. All studies further agree that increased transnational cooperation, notably in terms of market integration and cross-border power exchanges, can bring about important economic advantages for the North African power sector. Renewable energy expansion could also drive electricity exports to Europe, but in integrated power market schemes, such exports only become viable with a very high share of renewable energy exceeding 60% of the North African power demand.
The transformation of energy systems is influencing economic policy agendas all over the world, particularly in industrialized countries. In this process, Germany has taken a pioneering role, and hence the technical innovations, legal frameworks, and business models established there are also of interest for other countries trying to achieve broader use of renewable energies. Energy cooperatives have been an important building block in the energy transition in Germany, although their practical importance is neither quantitatively nor qualitatively reflected in the academic literature. Drawing on recently collected data, this paper presents an overview of German energy cooperatives in terms of organization, financing, and membership. We then review literature from economics and the social sciences that has been used to analyze cooperatives on various levels in other fields. We discuss how these theories could be applied to create a better understanding of energy cooperatives, and we derive a preliminary research agenda for their analysis. We also assess the scope for interdisciplinary work among economists, sociologists, and other disciplines.
Reforming the EU VAT system to support the transition to a low-carbon and resource efficient economy
(2015)
This chapter discusses the question of ecologically differentiated value added taxes (VAT) as a tool to overcome tax-related cognitive barriers by connecting to an existing tax system. This is elaborated along several aspects: (a) The role indirect of consumption taxes for the economy, (b) the legal issues of the VAT system, (c) the EU harmonization efforts in this context, (d) the distributional implications of value added taxes. Following this, the chapter develops a proposal for a VAT reform (e). To this end, it looks at potential and existing differentiations between sectors, products and services, and product and service groups and turns to those consumption areas that are widely identified as particularly resource and carbon intensive and sets out how a harmonization of the overall system and an ecological differentiation in single consumption areas could be brought together. Potential impacts and effects are briefly discussed (f) and some conclusions are drawn (g). The subject addressed in the chapter is relevant from a policy perspective but mainly descriptive: It does not use innovative qualitative and quantitative tools.
Small-scale residential biomass combustion for space heating and warm water production already holds a considerable share on overall energy production from biomass in Europe. In the existing regulative framework of EU air quality and climate protection targets, an extended usage of renewable biomass heating without an increase of harmful emissions is urgently needed. In this context, the FP7 project "EU-UltraLowDust" (ULD) aimed at the demonstration of highly efficient and ultra-low emission small-scale biomass combustion technologies and the development of supporting policy recommendations.
New combustion technology operating at almost zero particulate matter (PM) emissions has been demonstrated, rivalling even the performance of state-of-the-art natural gas fuelled systems. In this context, the authors analysed EU policy options for a faster diffusion of these new innovative technologies. The analysis presented in this paper is based on results from an original impact assessment with special focus on energy efficiency and emission scenarios, including the potential effects of a broad deployment of the new ULD technologies as well as the early replacement of poor performing existing installations.
As the derived results show that major shares of energy consumption and emissions from residential biomass combustion in the EU are caused by old heating systems, specific policy measures for new and existing installations have been analysed. Following this, a recommended and harmonized policy package for new Small Combustion Installations (SCI) to be put on the market as well as for existing SCI in the stock has been developed, which will be presented in this paper. The basic policy package addresses new installations and consists of a two-step approach, aiming at enhancing the current and forthcoming policies addressing the SCI market in Europe. A complementary second policy package for existing installations aims specifically at the early replacement of SCI already installed in the stock, which are characterized by low efficiency and high emissions.
The German federal state of North Rhine-Westphalia (NRW) is home to one of the most important industrial regions in Europe, and is the first German state to have adopted its own Climate Protection Law (CPL). This paper describes the long-term (up to 2050) mitigation scenarios for NRW’s main energy-intensive industrial sub-sectors which served to support the implementation of the CPL. It also describes the process of scenario development, as these scenarios were developed through stakeholder participation. The scenarios considered three different pathways (best-available technologies, break-through technologies, and CO2 capture and storage). All pathways had optimistic assumptions on the rate of industrial growth and availability of low-carbon electricity. We find that a policy of "re-industrialisation" for NRW based on the current industrial structures (assumed here to represent an average growth of NRWs industrial gross value added (GVA) of 1.6% per year until 2030 and 0.6% per year from 2030 to 2050), would pose a significant challenge for the achievement of overall energy demand and German greenhouse gas (GHG) emission targets, in particular as remaining efficiency potentials in NRW are limited. In the best-available technology (BAT) scenario CO2 emission reductions of only 16% are achieved, whereas the low carbon (LC) and the carbon capture and storage (CCS) scenario achieve 50% and 79% reduction respectively. Our results indicate the importance of successful development and implementation of a decarbonised electricity supply and breakthrough technologies in industry - such as electrification, hydrogen-based processes for steel, alternative cements or CCS - if significant growth is to be achieved in combination with climate mitigation. They, however, also show that technological solutions alone, together with unmitigated growth in consumption of material goods, could be insufficient to meet GHG reduction targets in industry.
Societal transitions involve multiple actors, changes in institutions, values and technologies, and interactions across multiple sectors and scales. Given this complexity, this paper takes on the view that the societal transitions research field would benefit from the further maturation and broader uptake of modelling approaches. This paper shows how modelling can enhance the understanding of and support stakeholders to steer societal transitions. It discusses the benefits modelling provides for studying large societal systems and elaborates on different ways models can be used for transitions studies. Two model applications are presented in some detail to illustrate the benefits. Then, limitations of modelling societal transitions are discussed, which leads to an agenda for future activities: (1) better cooperation in the development of dynamic models, (2) stronger interaction with other transition scholars and stakeholders, and (3) use of additional modelling approaches that we think are relevant to and largely unexplored in transitions studies.
Prospects of carbon capture and storage (CCS) in China's power sector : an integrated assessment
(2015)
Objective: The aim of the present article is to conduct an integrated assessment in order to explore whether CCS could be a viable technological option for significantly reducing future CO2 emissions in China. Methods: In this paper, an integrated approach covering five assessment dimensions is chosen. Each dimension is investigated using specific methods (graphical abstract). Results: The most crucial precondition that must be met is a reliable storage capacity assessment based on site-specific geological data. Our projection of different trends of coal-based power plant capacities up to 2050 ranges between 34 and 221 Gt of CO2 that may be captured from coal-fired power plants to be built by 2050. If very optimistic assumptions about the country’s CO2 storage potential are applied, 192 Gt of CO2 could theoretically be stored as a result of matching these sources with suitable sinks. If a cautious approach is taken, this figure falls to 29 Gt of CO2. In practice, this potential will decrease further with the impact of technical, legal, economic and social acceptance factors. Further constraints may be the delayed commercial availability of CCS in China; a significant barrier to achieving the economic viability of CCS due to a currently non-existing nation-wide CO2 pricing scheme that generates a sufficiently strong price signal; an expected life-cycle reduction rate of the power plant's greenhouse gas emissions of 59-60%; and an increase in most other negative environmental and social impacts. Conclusion and practice implications: Most experts expect a striking dominance of coal-fired power generation in the country's electricity sector, even if the recent trend towards a flattened deployment of coal capacity and reduced annual growth rates of coal-fired generation proves to be true in the future. In order to reduce fossil fuel-related CO2 emissions to a level that would be consistent with the long-term climate protection target of the international community to which China is increasingly committing itself, this option may require the introduction of CCS. However, a precondition for opting for CCS would be finding robust solutions to the constraints highlighted in this article. Furthermore, a comparison with other low-carbon technology options may be useful in drawing completely valid conclusions on the economic, ecological and social viability of CCS in a low-carbon policy environment. The assessment dimensions should be integrated into macro-economic optimisation models by combining qualitative with quantitative modelling, and the flexible operation of CCS power plants should be analysed in view of a possible role of CCS for balancing fluctuating renewable energies.
Many countries have started to develop policy programs for the sustainable use of natural resources. Indicators and targets can cover both a territorial and a life-cycle-wide global perspective. This article focuses on how a safe operating space for global material resource use can be outlined based on existing economy-wide material flow indicators. It reflects on issues such as scale and systems perspective, as the choice of indicators determines the target "valves" of the socio-industrial metabolism. It considers environmental pressures and social aspects of safe and fair resource use. Existing proposals for resource consumption targets are reviewed, partially revisited, and taken as a basis to outline potential target values for a safe operating space for the extraction and use of minerals and biomass by final consumption. A potential sustainability corridor is derived with the Total Material Consumption of abiotic resources ranging from 6 to 12 t/person, the Total Material Consumption of biotic resources not exceeding 2 t/person, and the Raw Material Consumption of used biotic and abiotic materials ranging from 3 to 6 t/person until 2050. For policy, a "10-2-5 target triplet" can provide orientation, when the three indicators are assigned values of 10, 2, and 5 t/person, respectively.
On 12 December 2015, the Parties to the UNFCCC adopted the "Paris Agreement". With this step, the world community has agreed on a collective and cooperative path to fight human-induced climate change: After 25 years of UN climate diplomacy, the world's governments have for the first time in history negotiated a treaty which envisages climate action by all nations. The Agreement sets the world on a path that might lead to a decarbonised economy in the second half of the century. Researchers from the Wuppertal Institute have observed COP 21 and elaborated a detailed analysis of the results. The assessment provides an overview of the most important negotiation outcomes, assesses their results as well as shortfalls and provides an outlook of the next steps needed to implement the Paris Agreement's goals and to set the world firmly on a non-fossil based development path.
The Deep Decarbonization Pathways Project (DDPP) is a collaborative global initiative led by IDDRI and SDSN that aims to demonstrate how individual countries can transition to a low-carbon economy preferably consistent with the internationally agreed target of limiting the increase in global temperature to less than 2°C. Achieving this target will require a profound transformation of energy systems by mid-century, a "deep decarbonization". The project comprises 16 research teams composed of leading institutions from the world's largest GHG emitting countries: Australia, Brazil, Canada, China, France, Germany India, Indonesia, Italy, Japan, Mexico, Russia, South Africa, South Korea, United Kingdom, and United States. Each team is exploring what is required to achieve this transformation in their own country's economy while taking into account socio-economic conditions, development aspirations, infrastructure stocks, natural resource endowments, and other relevant factors.
The DDPP country study for Germany explores what is required to achieve deep decarbonization in Germany. It has been conducted by the Wuppertal Institute for Climate, Environment and Energy, with the support of Stiftung Mercator. The study discusses how the German government's target of reducing domestic GHG emissions by 80 to 95% by 2050 (versus 1990) can be reached.
The paper reflects the hypothesis that those technological and institutional innovations survive which extend the safe operating range (SOR) of the Humans-Technologies-Institutions (HTI) system (e.g. companies, cities, regions and countries). The multidimensional SOR of a country comprises in particular safe livelihood, quality of life, security, monetary stability, supply security and quality of the environment. A "mechanism of progress" is described involving the search for higher safety and independence of constraints. With innovation and learning in a key role, the mechanism leads to a relative decoupling of resource use and economic value added and a growing share of knowledge generation in the economy. Competition of HTI systems for scarce resources may lead to independence strategies such as enhanced resource efficiency. It may also lead to cooperation of competing HTI systems facilitated by new institutions thus forming an HTI system at higher level of complexity. While the consortium could coordinate their resource consumption within the boundaries of safe operating space, the partner HTI systems would further expand their SOR. Data is provided that net resource importing countries have developed higher material productivity thus increasing their independence from resource supply, and countries with such capability have gained higher innovation capacity.
National policies for resource efficiency and waste management : structures, impacts, and deficits
(2015)
The innovative software system "myEcoCost" enables to gather and communicate resource and environmental data for products and services in global value chains. The system has been developed in the consortium of the European research project myEcoCost and forms a basis of a new, highly automated environmental accounting system für companies and consumers. The prototype of the system, linked to financial accounting of companies, was developed and tested in close collaboration with large and small companies.
This brochure gives a brief introduction to the vision linked to myEcoCost: a network formed by collaborative environmental accounting nodes collecting environmental data at each step in a product's value chains. It shows why better life cycle data are needed and how myEcoCost addresses and solves this problem. Furthermore, it presents options for a future upscaling of highly automated environmenal accounting for prodcuts and services.
Energy systems with high shares of renewable electricity are feasible, but require balancing measures such as storage, grid exchange or demand-side management to maintain system stability. The demand for these balancing options cannot be assessed separately since they influence each other. Therefore, a model was developed to analyze these mutual dependencies by optimizing a concerted use of balancing technologies. This model is presented here. It covers the European electricity system in hourly resolution. Since this leads to a large optimization problem, several options for reducing system complexity are presented. The application of the model is illustrated with a case study outlining the effects of pumped hydro storage and controlled charging of electric vehicles in central Europe.
Lessons for model use in transition research : a survey and comparison with other research areas
(2015)
The use of models to study the dynamics of transitions is challenging because of several aspects of transitions, notably complexity, multi-domain and multi-level interactions. These challenges are shared by other research areas that extensively make use of models. In this article we survey experiences and methodological approaches developed in the research areas of social-ecological modeling, integrated assessment, and environmental modeling, and derive lessons to be learnt for model use in transition studies. In order to account for specific challenges associated with different kinds of model applications we classify models according to their uses: for understanding transitions, for providing case-specific policy advice, and for facilitating stakeholder processes. The assessment reveals promising research directions for transition modeling, such as model-to-model analysis, pattern-oriented modeling, advanced sensitivity analysis, development of a shared conceptual framework, and use of modeling protocols.
Achieving a truly sustainable energy transition requires progress across multiple dimensions beyond climate change mitigation goals. This article reviews and synthesizes results from disparate strands of literature on the coeffects of mitigation to inform climate policy choices at different governance levels. The literature documents many potential cobenefits of mitigation for nonclimate objectives, such as human health and energy security, but little is known about their overall welfare implications. Integrated model studies highlight that climate policies as part of well-designed policy packages reduce the overall cost of achieving multiple sustainability objectives. The incommensurability and uncertainties around the quantification of coeffects become, however, increasingly pervasive the more the perspective shifts from sectoral and local to economy wide and global, the more objectives are analyzed, and the more the results are expressed in economic rather than nonmonetary terms. Different strings of evidence highlight the role and importance of energy efficiency for realizing synergies across multiple sustainability objectives.
This article presents an integrated assessment conducted in order to explore whether carbon capture and storage (CCS) could be a viable technological option for significantly reducing future CO2 emissions in South Africa. The methodological approach covers a commercial availability analysis, an analysis of the long-term usable CO2 storage potential (based on storage capacity assessment, energy scenario analysis and source-sink matching), an economic and ecological assessment and a stakeholder analysis. The findings show, that a reliable storage capacity assessment is needed, since only rough figures concerning the effective capacity currently exist. Further constraints on the fast deployment of CCS may be the delayed commercial availability of CCS, significant barriers to increasing the economic viability of CCS, an expected net maximum reduction rate of the power plant's greenhouse gas emissions of 67%-72%, an increase in other environmental and social impacts, and low public awareness of CCS. One precondition for opting for CCS would be to find robust solutions to these constraints, taking into account that CCS could potentially conflict with other important policy objectives, such as affordable electricity rates to give the whole population access to electricity.
This report is a synthesis of the research and re-evaluates the options previously considered in this project (Vieweg et al (2014)) in the light of the negotiation process up to today. The mitigation-related design elements considered are:
Participation and differentiation of countries; Types of commitments, including also the compulsory character of the commitments and time aspects; Guidance on ambition of the commitments to assure adequacy of global and individual countries' efforts; Transparency of commitments.
In early September 2014, about 4.000 scientists, activists and artists at the 4th International Conference on Degrowth sent out two messages.
1. Industrialized societies will change, either by disaster or by design. Accelerated resource exploitation and climate change can force societies into a transition. Or they swiftly develop new forms of economic, political and social organization which respect the planetary boundaries.
2. "Degrowth" has become a new social movement which translates scientific insights into cultural change, political change and social practice. Hence, the conference itself was an experiment on the potentials and limits of share economy, commoning and sufficiency.
A team of young scholars and activists from different German research institutes and non-govern- mental organisations prepared the conference. The team of the Wuppertal Institute was partly involved in the preperation of the conference. Scientists from all research groups took part in the conference, presenting and discussing project results.
The publication is a collection of contributions of the Wuppertal Institute to the conference and covers pivotal issues of the degrowth-debate: indicator development (Freyling & Schepelmann), working time reduction (Buhl), feminist theory (Biesecker & Winterfeld), and urban transition (Best).
Energy efficiency has multiple benefits. It usually is a win-win option for all aspects of sustainability - environment, social objectives, and economy. We need to evaluate and communicate these multiple benefits - to citizens, companies, and policy-makers. Due to strong market barriers, effective governance and policy packages for energy efficiency are needed. Evaluation shows effective policy can achieve around 2% per year of additional energy savings.
Measuring progress towards sustainable development requires appropriate frameworks and databases. The System of Environmental-Economic Accounts (SEEA) is undergoing continuous refinement with these objectives in mind. In SEEA, there is a need for databases to encompass the global dimension of societal metabolism. In this paper, we focus on the latest effort to construct a global multi-regional input-output database (EXIOBASE) with a focus on environmentally relevant activities. The database and its broader analytical framework allows for the as yet most detailed insight into the production-related impacts and "footprints" of our consumption. We explore the methods used to arrive at the database, and some key relationships extracted from the database.
The rising global demand for metals in a context of declining ore grades is driving the opening of new mines and the expansion of existing ones, disturbing substantial land areas (especially by open pits). However, how much land is currently disturbed globally? How much land could be disturbed by metal mining in 2050? This study investigates the global area disturbed by mining of iron, bauxite, copper, gold, and silver for the first time. The first part consists of the calculation of the specific land requirements, i.e. the area newly disturbed caused by the ore extraction at the mine site. The second part addresses the global area disturbed in the year 2011 whereas the third presents scenarios of how such area might evolve until 2050. The last part addresses the current and future pressures on global biodiversity by metal mines and shows possibilities for the future opening of new mines in low biodiversity areas, alleviating pressures in high biodiversity ones. This study presents the findings of the author´s dissertation hoping they are used as a frame to develop policies and incentives to reduce the amount of area directly disturbed by mines and their pressures on biodiversity.
Many have hoped that the CDM's Additionality, if applied to the wider climate finance domain, can contribute to standardizing the funding criteria. This JIKO Policy Brief therefore explore options of applying the CDM's to do just that. The authors highlight issues of environmental system integrity and efficient allocation of funding, and discuss potential limits of the CDM's Additionality concept in its current form, if applied to climate finance.
The prospects are limited, because a clear attribution of emission reductions is almost impossible in a system that does not have as well-defined borders as the zero-sum-game of tradable emission reductions under a capped environment.The authors propose some inroutes to adapting the current approach to Additionality in this context, and pose a number of questions that can help to further discuss and refine the CDM's Additionality concept to make it better applicable for a future, globally inclusive climate regime.
Standardised Baselines (SBs) shall improve the opportunities for least developed countries and other underrepresented regions to participate in the Clean Development Mechanism (CDM). SBs allow for shifting the effort of developing baseline scenarios and additionality testing from the individual project to the sectoral level. This research project followed two separate approaches in order to gather experiences with the development of SBs and to contribute to the advancement of the SB regulatory framework. Under the first approach, an SB for rural electrification in Ethiopia was developed in cooperation with the Ethiopian Designated National Authority, which submitted the SB to the UNFCCC Secretariat. In the second part of the project, a scoping study assesses how SBs can be developed to cover complex integrated production processes. The Indonesian cement sector was chosen as case for this study.
The research project seeks to identify the CDM SD tool's possible shortcomings, and to make structured recommendations on how to improve the EB's SD tool. Findings from this project are meant to have a lighthouse effect on the development of provisions on Sustainable Development within other carbon mechanisms of the UNFCCC and beyond. This report represents the consolidated findings of three work packages within this research project. The first chapter provides some background on the subject at hand, and leads into the report. The following chapter covers the assessment and comparison of the SD provisions of selected flexible mechanisms and multilateral standards.
Investments in urban transport should deliver the maximum economic, social and environmental benefits; in times of constrained budgets, projects' economic viability is often the deciding factor. This paper discusses the current practices and challenges facing cities in assessing urban transport interventions. On this basis, it develops options for decision-makers to appraise small-scale, sustainable urban transport policy measures.
The analysis of current appraisal practice shows that data requirements and complexity are cities’ main obstacles appraising projects and comparing potential alternatives. Additionally, there is often a risk that project appraisal enters the planning process too late to play any meaningful role. Conducting a Cost-benefit
analysis (CBA) ex-ante is often only approved if the implementation of the measure in question is already likely. Often, a CBA is a means to access funds rather than a basis for decision-making. Project appraisal of small-scale and non-infrastructure-based measures is often simply too expensive.
On the basis of these findings, the paper discusses the following alternatives to comprehensive CBAs: 1) learn from others, 2) use a simplified assessment method, 3) rely on norms and values. All of these options aim to cope with the trade-off between effort and certitude. In practice, some policy-makers may already apply one or more of these options, but this has not been documented in a systematic manner. A systematic documentation of such practices could be a major step forward for implementation of sustainable and integrated urban transport projects, as it would shed some light on the reasoning behind decisions, from which conclusions could be drawn on the likely follow-on effects thereof and also possible improvements to the process.
The overall objective of the web-based consumer information tool Euro-Topten is to promote the market transformation towards energy efficient products. Euro-Topten informs consumers about the most energy efficient products in various categories and thereby aims to directly influence the purchasing decisions of individuals or professional buyers.
Providers of internet-based information tools are confronted with the problem, that there is no bidirectional interaction with the users. Hence, it is difficult to evaluate if the specific needs of users are addressed, if and how the user processes this information and to what extent the information influences the user's decision making process.
To study these questions, a web-based survey was conducted in two consecutive rounds. In the first round the survey focused on the assessment of the information tool itself and the motivation for using the Euro-Topten websites. This survey was online on all active Euro-Topten partner websites from October to December 2012. In total, 1791 users completed the survey.
In the second round, a subset of the survey population was queried again. 1,043 participants agreed to take part in a more comprehensive follow up survey, 383 completed the second survey between May and July 2013. The second survey concentrated on the question how Euro-Topten has influenced the purchasing behaviour of the survey participants. This gave significant insights on how the information on the Euro-Topten websites has affected purchasing decisions of the surveyed users.
Based on a comparison of performance indicators of the most efficient products recommended on the Euro-Topten websites with performance indicators of a base case product available on the market, avoided energy demand could be estimated for those users, who bought products from the Euro-Topten list. Based on these results, two impacts of Euro-Topten could be estimated: The influence of Euro-Topten on purchasing decision of users and the associated reductions in energy demand and CO2-emissions.
A lack of proper treatment infrastructure and sufficient capacity for municipal solid waste (MSW) treatment is a crucial barrier for the environmentally sound management of waste. However, overcapacities, especially for waste incineration, also have to be taken into account regarding their potential impacts on recycling markets and waste treatment prices. This paper provides a comprehensive overview of existing MSW incineration plants and their capacities within Europe. In combination with the analysis of imports and exports of MSW for incineration, it provides an indication of over- and undercapacities for incineration plants. Among other things, the results show that in six of the 32 countries analysed in this study, capacities exceed more than 50% of the annual waste generation, while in two countries the total amount of waste generated annually is not enough to fill all the incineration plants.
Energy sufficiency policy : an evolution of energy efficiency policy or radically new approaches?
(2015)
In the last four decades, energy efficiency increased significantly in OECD countries. However, only during the most recent years, total energy consumption started to decrease a little, and much more slowly than energy efficiency potentials would suggest. Energy sufficiency has therefore gained new attention as a way to limit and reduce total energy consumption of a household or a country overall.
The project "Energiesuffizienz" funded by the German ministry for research has examined what energy sufficiency actually is, and what householders, household members but also manufacturers and local authorities could do to make electricity use in the home more sufficient. The focus of this paper is the policy part of the project - the first comprehensive analysis of an energy sufficiency policy.
The objective is to find out how policy can support market actors in using the energy sufficiency options identified. As for energy efficiency policy, it starts with the gathering of potential sufficiency actions and the analysis of the relevant barriers all market actors face, to derive recommendations for which policy instruments need to be combined to an effective policy package, and which other pre-conditions have to be met. Energy efficiency and energy sufficiency should not be seen as opposed to each other but work in the same direction - saving energy. Therefore, some instruments of the energy sufficiency policy package may be the same as for energy efficiency - such as energy taxation, and linear or progressive energy prices. Some may simply adapt technology-specific energy efficiency policy instruments. Examples are progressive appliance efficiency standards, standards based on absolute consumption, or providing energy advice. However, sufficiency may also require radical new approaches particularly to mitigate the drivers of non-sufficiency. They may range from promotion of completely different services for food and clothes cleaning, to instruments for limiting average dwelling floor area per person, or to a cap-and-trade system for the total electricity sales of a supplier to its customers, instead of an energy efficiency obligation. The paper presents these and other elements of an integrated energy sufficiency policy package resulting from this analysis.
Energy efficiency of a range of domestic appliances covered by the labelling and ecodesign directives has improved significantly over the last 15 years. However, the power consumption of the German residential sector has remained relatively constant over this period. Besides other factors, such as decreasing average household size, the main reasons for this development were the increases of the types, features, size, equipment stock and usage times of appliances and devices in private households.
The project "Energy Sufficiency - strategies and instruments for a technical, systemic and cultural transformation towards sustainable restriction of energy demand in the field of construction and everyday life" investigates how the complementation of energy efficiency with energy sufficiency could lead to more user adequate domestic products and product-service systems and thereby result in an absolute reduction of power consumption.
In this project, energy sufficiency is defined as a strategy to reduce energy consumption by three approaches:
1. Quantitative reduction of sizes, features, usage times of devices etc.
2. Substitution of technical equipment in households by e.g.urban services.
3. Adjustment of technical services delivered by appliances toutility needed and desired by users.
The energy saving effects of an application of these approaches were modelled for different types of households and the energy saving potentials of energy sufficiency quantified. Innovative approaches for user adequate products and services were developed in open innovation workshops by the Design Thinking method. The paper summarizes some of the intermediate results of theoretical and transdisciplinary investigations of the project that runs until May 31, 2016. Furthermore, a first set of design criteria for user adequate appliances enabling energy sufficiency are developed based on these results. The paper concludes with suggestions for the future development of energy labelling and ecodesign derived from the design criteria and supplemented by examples of existing requirements according to the voluntary environmental label "Blauer Engel".
Although a substantial economic energy saving potential exists in the residential sector of the European Union, the energy efficiency service (EES) market is much less developed in this market segment than in other demand sectors (e.g. the industry or the public/service sector).
This paper presents an analysis of the current situation and existing potentials for future expansion. A specific analysis methodology has been developed and applied by a research consortium in 18 EU countries. This methodology has mostly built upon an extensive review of the existing literature and on interviews of a large number of acknowledged experts. Its application has allowed identifying encouraging development trends in specific market segments where the possibility of aggregating the EES demand or of exploiting good relationships with customers have created interesting investment opportunities. These trends have been observed in particular in Germany, Denmark, France, Flanders (BE), Hungary, Romania and UK. The assessment performed has also allowed discussing a series of strategies and policy measures that can be adopted to overcome existing barriers to market development. The general conclusion drawn in the paper is that energy efficiency policies supporting EES markets in the residential sector are highly needed. Although EU policies have typically a limited direct impact, they can increase trust into EESs and EES providers. At the national level, a stronger collaboration of governments or local administrations with banks to finance EESs is still very necessary in many EU countries.
Energy storage is one option to provide the electricity grid with flexibility. Short-term storage can provide system services for power quality, whereas medium-term storage allows to shift significant amounts of energy over some hours up to days. Seasonal or long-term storage can, for example, be provided by the power-to-gas technology. Significant amounts of storage will be necessary, especially when a fully renewable supply is approached. New mechanisms are needed to ensure anticipatorily that sufficient flexibility is in the system at any time.
Economics beats politics
(2015)
In 2009, the German government launched its "National Development Plan for Electric Mobility" which set the concrete target of having 1 million electric vehicles on the road by 2020. However, there have been hypes around e-mobility before and even if this goal were to be reached, a merely quantitative aim of a certain number of electric vehicles will not suffice to contribute to a more sustainable development in transport. This requires a more comprehensive vision of sustainable e-mobility as a system innovation. Thus, the question addressed in this thesis is: How can we assess - at this critical early stage - whether there is potential for e-mobility developing as a sustainable system innovation? A theoretical framework will be developed for assessing the potential of a wider transition at an early stage by analyzing current patterns of socio-technical co-evolution and embedding these in a wider framework of the structural dynamics involved in transitions. The aim of the analysis is to identify whether 'system-innovative' projects do emerge in the case of Germany/Baden-Württemberg and what patterns (e.g. in terms of specific actor constellations, institutional adjustments etc.) can explain this. It will be shown that the system-innovative potential of this e-mobility niche remains limited, due to the powerful influence of incumbents, conflicting political goals and traditional science approaches. A few more system-innovative activities emerge where powerful actors from outside are involved, who are capable of viewing mobility in a more systemic way (e.g. actors from the public transport or housing sector). It is argued that the role of large demonstration projects is important, but they need to be designed as transdisciplinary research projects from the beginning.
Parties to the United Nations Framework Convention on Climate Change (UNFCCC) have decided to establish a "new market-based mechanism" (NMM) to promote mitigation across "broad segments" of developing countries' economies but have so far defined only some broad outlines of how it is to function. This article identifies key design options of the NMM based on a survey of the literature and reviews them against a range of assessment criteria. Furthermore, potential application of the NMM is analysed for five country-sector combinations. The analysis finds that lack of data and of institutions that could manage the NMM are key bottlenecks. In addition, the analysis reveals the existence of substantial no-regret reduction potential, suggesting that sectors may not be sensitive to the market incentives from an NMM. Governmental capacity building and Nationally Appropriate Mitigation Actions (NAMAs) might be more appropriate in the short term, preparing the ground for the adoption of market-based approaches at a later stage. NMM pilots could be based on supported NAMAs but should ideally generate tradable and compliance-grade emission credits in order to fully simulate the real-life conditions of an NMM.
Policy relevance: The Doha conference identified "possible elements" of the NMM to be addressed in the development of the NMM's modalities and procedures. This article identifies available options for these possible elements and reviews these options against a number of criteria, including environmental effectiveness, economic efficiency, political and administrative efficiency, and others. On this basis the article identifies options that are best suited to fulfil the main aims of the NMM as decided at the Durban conference, "to enhance the cost-effectiveness of, and to promote, mitigation actions". In addition, the article analysis potential application of the NMM for five country-sector combinations. The analysis assesses the emission reduction potential that could be mobilized through the NMM as well as the institutional market readiness of the sectors. Finally, the article synthesizes the challenges ahead for the NMM that have emerged from the analysis and suggests possible ways forward.
Decoupling resource consumption and economic growth : insights into an unsolved global challenge
(2015)
Decision-making in sustainable urban mobility planning : common practice and future directions
(2015)
The European Commission aims to foster sustainable local transport systems through the concept of "Sustainable Urban Mobility Plans" (SUMPs). This paper is intended as a think piece highlighting the challenges for cities in selecting sustainable and cost-effective transport and mobility measures. Not only does the paper convey an understanding of the challenges of determining a transport project's viability, but it also presents five case studies of sustainable urban mobility planning and the role of project appraisal in those policy-making processes.
In the face of persistent sustain ability problems challenging economic development, ecological integrity as well as social justice, transformational changes are crucial. Proposed changes shall include, for instance, large-scale transitions of practices, infrastructures as well as values and priorities. In Germany, real-world laboratories are proposed for research in and with society, aiming to understand and contribute to transformations.
The CO2 utilisation is discussed as one of the future low-carbon technologies in order to accomplish a full decarbonisation in the energy intensive industry. CO2 is separated from the flue gas stream of power plants or industrial plants and is prepared for further processing as raw material. CO2 containing gas streams from industrial processes exhibit a higher concentration of CO2 than flue gases from power plants; consequentially, industrial CO2 sources are used as raw material for the chemical industry and for the synthesis of fuel on the output side. Additionally, fossil resources can be replaced by substitutes of reused CO2 on the input side. If set up in a right way, this step into a CO2-based circular flow economy could make a contribution to the decarbonisation of the industrial sector and according to the adjusted potential, even rudimentarily to the energy sector.
In this study, the authors analyse potential CO2 sources, the potential demand and the range of applications of CO2. In the last chapter of the final report, they give recommendations for research, development, politics and economics for an appropriate future designing of CO2 utilisation options based upon their previous analysis.
Due to significant success in technology development and cost reductions, the electricity system is now widely perceived as the part of the energy system to be first in decarbonisation. This means a double challenge for the system: Firstly, it will undergo significant change due to rapidly increasing shares of fluctuating renewable generation; Secondly, there will be an expansion of electricity into other fields of the energy system such as heat generation and transport.
Consumption-based CO2 emissions, which are commonly calculated by means of environmentally extended input-output analysis, are gaining wider recognition as a way to complement territorial emission inventories. Although their use has increased significantly in the last years, insufficient attention has been paid to the methodological soundness of the underlying environmental extension. This should follow the internationally agreed accounting rules of the System of Environmental-Economic Accounting, which addresses the activities undertaken by the residents of a country, independent from where these take place. Nonetheless, some footprint calculations use extensions that account for all the activities within the territory, which leads to methodological inconsistencies. Thus, this article introduces the most relevant conceptual differences between these accounting frameworks and shows the magnitude of the gap between them building on the data generated for the EXIOBASE model. It concludes that the differences are high for many countries and their magnitude is increasing over time.
German electricity giants have recently taken high-level decisions to remove selected fossil fuel operations from their company portfolio. This new corporate strategy could be seen as a direct response to the growing global influence of the fossil fuel divestment campaign. In this paper we ask whether the divestment movement currently exerts significant influence on decision-making at the top four German energy giants - E.On, RWE, Vattenfall and EnBW. We find that this is not yet the case. After describing the trajectory of the global fossil fuel divestment campaign, we outline four alternative influences on corporate strategy that, currently, are having a greater impact than the divestment movement on Germany's power sector. In time, however, clear political decisions and strong civil support may increase the significance of climate change concerns in the strategic management of the German electricity giants.