Refine
Year of Publication
- 2012 (119) (remove)
Document Type
- Report (32)
- Peer-Reviewed Article (30)
- Conference Object (22)
- Part of a Book (15)
- Working Paper (12)
- Contribution to Periodical (4)
- Master Thesis (2)
- Doctoral Thesis (1)
- Periodical Part (1)
Language
- English (119) (remove)
Summary for policymakers
(2012)
Shifting the resource base for chemical and energy production from fossil feedstocks to renewable raw materials is seen by many as one of the key strategies towards sustainable development. The utilization of biomass for the production of fuels and materials has been proposed as an alternative to the petroleum-based industry. Current research and policy initiatives focus mainly on the utilization of lignocellulose biomass, originating from agriculture and forestry, as second generation feedstocks for the production of biofuels and electricity. These activities act on the assumption that significant amounts of biomass for non-food purposes are available. However, given a certain productivity per area, the current massive growth in global biofuels demand may in the long term only be met through an expansion of global arable land at the expense of natural ecosystems and in direct competition with the food-sector. Although many studies have shown the potential of biofuels production to reduce both, greenhouse gas emissions and non-renewable energy consumption, these production routes are still linear processes which depend on significant amounts of agricultural or forestry production area. Cascading use, i.e. when biomass is used for material products first and the energy content is recovered at end-of-life, may provide a greater environmental benefit than primary use as fuel. Considering waste and production residues as alternative feedstocks could help to further reduce pressures on global arable land. This research focused on thermochemical and biochemical technologies capable of utilizing organic waste or forestry residuals for energy, chemical feedstock, and synthetic materials (polymers) generation. Routes towards synthetic materials allow a closer cycle of materials and can help to reduce dependence on either fossil or biobased raw materials. The system-wide environmental burdens of three different technologies, including (1) municipal solid waste (MSW) gasification followed by Fischer-Tropsch synthesis (FTS), (2) plasma gasification of construction and demolition (C&D) wood for syngas production with energy recovery, and (3) forest residuals use in a biorefinery for polyitaconic acid (PIA) production, were assessed using life-cycle assessment. The first two studies indicated that MSW gasification and subsequent ethylene and polyethylene production via FTS has lower environmental impacts than conventional landfilling. In the future, as societies may shift towards the use of renewable energy, power offset by conventional waste-to-energy systems would not be as significant and chemicals production routes may then become increasingly competitive (in terms of environmental burdens) also to waste incineration. While production cost of Fischer-Tropsch derived chemicals seems not yet competitive to fossil-based chemicals provision, future price increases in global oil prices as well as changes in waste tipping fees, and efficiency gains on site of the waste conversion systems, may alter the economics and allow carbon recycling routes to reach a price competitive to fossil-based production routes. The third study found that plasma gasification of C&D wood for energy recovery has roughly similar environmental impacts than conventional fossil-based power systems. However, process optimization with respect to coal co-gasified, coke used as gasifier bed material, and fuel oil co-combusted in the steam boiler, would allow to significantly lower the system-wide environmental burdens. The fourth study looked at PIA production from softwood hemicellulose in a stream integrated approach (with the partially macerated wood and lignin being used in other existing processes such as pulp & paper plants for conventional pulp and bioenergy production). The assessment indicated lower global warming potential, energy demand, and acidification, for the wood-based PIA polymer, when compared to corn-based PIA and fossil-based polyacrylic acid (PAA). However, water use associated with wood-derived PIA was found to be higher than for fossil-based PAA production and land occupation is highest for the wood-derived polymer. It is hoped that results of this dissertation will add to the current debate on sustainable waste and biomass utilization and to establish future supply chains for green and sustainable chemical products.
The Durban conference decided to establish a new market-based mechanism that is to cover a broad segment of a country's economy. The implementation details are to be agreed at this year's conference in Qatar. The question is, however, which developing countries would actually be able to implement such a new mechanism. The introduction of the EU emission trading system highlighted the many challenges that even advanced developed countries face when establishing a carbon market. This paper by Wolfgang Sterk and Florian Mersmann therefore aims to explore the essential prerequisites for the implementation of new market mechanisms (NMM). In addition to a theoretical discussion it considers the cases of China and Mexico.
Defining the prevention of waste as top priority of the waste hierarchy - as confirmed by the revised Waste Framework Directive (WFD) - is much more than a simple amendment of ways to deal with waste, but means nothing less than a fundamental change of the socio-technical system of waste infrastructures and requires a transition from end-of-pipe technologies towards an integrated management of resources. The WFD therefore obligates member states to develop national waste prevention programs as a new policy instrument with the development of waste prevention indicators as one of the core elements. The article discusses the limitations of waste-based key figures and shows the need for more process-oriented indicators. As part of the development of national waste prevention programs such indicators reveal the relevance of different barriers that have to be overcome in order to make prevention an effective top priority in the waste hierarchy. With regard to path dependencies caused by sunk costs in end-of-pipe waste infrastructures the absolute amount of integrated environmental investments, as well as their share of the total waste-related investments, can be seen as indicators for the level of innovation activities aimed at waste prevention. Sector-specific indicators for the production phase could be used as benchmarks and to highlight differences in the need for policy interventions.
Leasing society : study
(2012)
Conflict minerals
(2012)
Wind energy that can neither be fed into the grid nor be used regionally must be curtailed. This paper proposes different options to deal with such surplus wind energy amounts in a time horizon until 2020. It assesses their ability to handle the surplus energy in a sustainable way using a multi criteria analysis. The paper bases on a study that was prepared for the Ministry for Climate Protection, Environment, Agriculture, Nature Conservation and Consumer Protection of North Rhine-Westphalia between 2010 and 2012.
This study aims to investigate whether, to what extent and how a transition toward integrated flood management has taken place in the Dongting Lake area at the middle Yangtze. Accordingly, we conducted a longitudinal research of its flood management (1949–2009). We developed an analytical framework linking regime components to two societal learning types (double and triple-loop learning) that are key to a regime transition. Our study shows that the transition toward integrated flood management has already started, but the whole regime transformation will still take time to complete, due to, for example, the not-yet-ready decision-making processes that shape the structure changes as well as the incompatibilities between what is on paper and real implementation. To understand how the regime transition took place, we investigated where and how triple-loop learning was initiated as well as how so-called "informal learning processes" has contributed to the transition of Dongting flood management.
To achieve an efficient use and allocation of limited water resources and thus resolve increasing water use conflicts due to fast rising societal water demands, in 2000, the Chinese government started a management strategy of 'Construction of a Water Saving Society (WSS)'. It is guided by the principle that socio-economic development should consider the carrying capacity of the ecosystem and focuses on institutional innovation, building on the water rights concept. This paper explores the innovation process during the transition towards WSS by investigating the development course of the innovation process during the transition towards WSS, and the adaptive capacity of the existing water management regime underlying the innovation process. Accordingly, an analysis framework consisting of three types of governance activities and factors determining a regime's adaptive capacity was developed, based on the theory of transition management and adaptive governance. The Tianjin and Zhangye WSS experiments were selected for a deep understanding of local innovations. It is revealed that co-evolution of all three types of governance activities that are claimed to be essential for transition has taken place. However, the current adaptive capacity of the regime still needs further enhancement to support the transition towards the desired WSS in China. Finally, some general insights are provided for policy innovations in other political economies.
For decades, the Chinese government has been searching for solutions to cope with the increasing imbalance between the supply and demand of water in the Yellow River Basin. This paper aims at a better understanding of the development of the water allocation regime in the Yellow River Basin between 1950 and 2009, introducing a fresh perspective based on the notion of "regime transition". Accordingly, we investigated 1) whether so-called "Windows of Opportunity for Transition (WOPTs)" emerged, triggering a transition, and whether WOPT(s) resulted in a stable transition towards the new regime; 2) how informal learning processes and epistemic communities have contributed to the regime change. We adapted Kingdon's "multiple stream model" and identified four WOPTs from the 1950s, analyzing the reconfiguration process of the regime after the onset of the transition. Our examples of two types of informal learning processes demonstrate their contribution to the creation of WOPTs and the reconfiguration of the regime. Furthermore, this study indicates, in a qualitative manner, how epistemic communities contribute to the knowledge base of the regime, and thus to its development. Finally, we have provided a general insight into the further development of the water allocation regime and highlighted potential avenues for further studies.
This thesis explores the opportunities and constraints for the adoption of a post-growth economy as a plausible approach towards sustainability by social movements. With the transdisciplinary perspective of sustainability science, the qualitative study of social movements and post-growth found that Germany does not have a post-growth movement. Nevertheless, the environmental movement and, in particular, Friends of the Earth Germany are suitable candidates of change for post-growth. However, they have not adopted post-growth yet because of certain gaps in bridging concepts of post-growth with their own work. To fill this gap, the study recommends to operationalize post-growth in five steps: (1) to distinguish between "sustainable liberalism" and "fair de-growth" as two major types of post-growth, (2) to re-frame the promises of economic growth as myths, (3) to complement "political choice" as means towards post-growth with "social choice", (4) to identify and compile areas of a post-growth economy, and (5) to overcome
the inherent power dilemma between agents of change and actors of these areas, that are required to be transformed, while forming coalitions between both. If these recommendations are taken into account by academics and activists, the environmental movement is more likely to successfully activate causal mechanisms of change for the transition to a post-growth economy. With its critique on the current comprehension of progress as economic growth, postgrowth is initiating a new, more fruitful phase of the sustainability discourse.
This report analyses the international climate negotiations at the UN climate conference in Doha in December 2012. The report is structured along the three main tracks of the negotiations: the agreement on a second commitment period under the Kyoto Protocol, the closure of the Ad-hoc Working Group on Long-Term Cooperative Action under the Convention, and the start of negotiations on a new comprehensive climate agreement that are to be concluded by 2015.
The field of nutrition is facing numerous social, ecological and economic challenges in the coming decades. The food industry belongs to the most significant economic sectors worldwide and the increasing population of 9 billion in 2050 will cause a growing demand on food. So far, changing lifestyles, especially the global rising consumption of meat and dairy products are increasing environmental damage. Moreover our health and wellbeing are the direct result of healthy or unhealthy nourishment and influence follow-up indicators like individual and public health, the expense of the health sector and work productivity.
The material footprint is a tool to measure and optimize the resource consumption of both products and their ingredients and the production processes along the whole value chain. It covers the whole life cycle of the products, from the extraction of raw materials to the processing industry, distribution, consumption, recycling, and disposal. In order to decrease resource consumption to a level in line with the planetary boundaries, the material footprint of household consumption should achieve a level of six to eight tonnes per capita in a year by 2050. This means a reduction in natural resource consumption by a factor of 5 to 10 in Western European countries. In order to ensure a decent lifestyle for all people in 2050, also the material footprint of nutrition has to be reduced significantly by 2050.
The paper shows the relevance and role of nutrition in the overall material footprint of households on the basis of existing studies on the overall resource consumption caused by household consumption. Quantified meal and diet examples are given. It also discusses the causes of food waste and raises the question how a reduction of food waste is possible and can help decreasing the resource consumption in the food sector.
Fragmentation or standardisation? : Offset use in Australia, California, Japan and South Korea
(2012)
The potential of natural gas as a bridging technology in low-emission road transportation in Germany
(2012)
Greenhouse gas emission reductions are at the centre of national and international efforts to mitigate climate change. In road transportation, many politically incentivised measures focus on increasing the energy efficiency of established technologies, or promoting electric or hybrid vehicles. The abatement potential of the former approach is limited, electric mobility technologies are not yet market-ready. In a case study for Germany, this paper focuses on natural gas powered vehicles as a bridging technology in road transportation. Scenario analyses with a low level of aggregation show that natural gas-based road transportation in Germany can accumulate up to 464 million tonnes of CO2-equivalent emission reductions until 2030 depending on the speed of the diffusion process. If similar policies were adopted EU-wide, the emission reduction potential could reach a maximum of about 2.5 billion tonnes of CO2-equivalent. Efforts to promote natural gas as a bridging technology may therefore contribute to significant emissions reductions.
This chapter is an excerpt from a study commissioned by the European Parliament, which examines EU subsidies for agriculture, fisheries, transport, energy and regional development. Based on proven methodologies for the identification and assessment of environmentally harmful subsidies, the study assesses the sustainability level of the sectoral policies and makes recommendations for a reform that would contribute to the alignment of the EU budget towards a more sustainable growth. The following sections provide the main findings of one of the largest fields of expenditure within the EU budget, the structural and cohesion policy.
In the past few decades, geochemically scarce metals have
become increasingly relevant for emerging technologies in
domains such as energy supply and storage, information and
communication, lighting or transportation, which are regarded as
cornerstones in the transition towards a sustainable post-fossil
society. Accordingly, the supply risks of scarce metals and possible
interventions towards their more sustainable use have been
subject to an intense debate in recent studies. In this article, we
integrate proposed intervention options into a generic life cycle
framework, taking into account issues related to knowledge
provision and to the institutional setting. As a result, we obtain
a landscape of intervention fields that will have to be further
specified to more specific intervention profiles for scarce metals
or metals families. The envisioned profiles are expected to have
the potential to reduce action contingency and to contribute to
meeting the sustainability claims often associated with emerging
technol ogies.
The cement industry is one of the major energy consuming and CO2 emitting sectors in China. In 2010, 1,868 million tons of cement has been produced, which accounted for 56.1% of the world's total cement production. The 11th Five-Year Plan (FYP) (2006-2010) included policy measures for CO2 emission abatement in cement production. Based on the main governmental framework of CO2 mitigation policies at national level in the cement sector, key policies and technologies used during this period are identified and their effects on CO2 reduction are assessed. This paper calculates the reduction of CO2 emissions related to four main policies and technologies for efficient cement production in the 11th and the 12th FYP (2011-2015) with 2005 as a reference year. These are waste heat recovery, closing outdated facilities, substitution for clinker production and other technologies aiming to increase energy efficiency. Due to these measures, we estimate that a total CO2 emission reduction during the 11th FYP of 397 million tonnes could be saved, which is considerably different to 185.75 million tonnes estimated by Zeng (2008) and 303 million tonnes by the NDRC by using different calculation methods. Of the four technologies, the 4th group of energy efficiency increasing techniques was the most important policy and avoided the largest amount of CO2 emissions. Previous energy intensity reduction was mainly due to the outdated production closing and energy efficiency improving. Based on the assessment of technology performance, it appears that there is still a large emission reduction potential in cement production processes. The paper calculates this potential for the 12th FYP period (2011-2015) based on these four identified policy measures. The result is compared to the Chinese government targets in the 12th FYP and promising future CO2 mitigation policies and technologies are proposed, such as the use of alternative energy.
MIPS / hot spot analysis
(2012)
Increasing urbanisation and climate change belong to the greatest challenges of the 21st century. A high share of global greenhouse gas emissions are estimated to originate in urban areas (40 % to 78 % according to UN Habitat 2010). Therefore, low carbon city strategies and concepts implicate large greenhouse gas (GHG) mitigation potentials. At the same time, with high population and infrastructure densities as well as concentrated economic activities, cities are particularly vulnerable to the impacts of climate change and need to adapt. Scarce natural resources further constrain the leeway for long-term, sustainable urban development. The Low Carbon Future Cities (LCFC) project aims at tapping this three-dimensional challenge and will develop an integrated strategy / roadmap, balancing low carbon development, gains in resource efficiency and adaptation to climate change. The study focuses on two pilot regions - one in China (Wuxi) and one in Germany (Düsseldorf+) - and is conducted by a German-Chinese research team supported by the German Stiftung Mercator. The paper gives an overview of first outcomes of the analysis of the status quo and assessment of the most likely developments regarding GHG emissions, climate impacts and resource use in Wuxi. The project developed an emission inventory for Wuxi to identify key sectors for further analysis and low carbon scenarios. The future development of energy demand and related CO2 emissions in 2030 were simulated in the current policy scenario (CPS), using five different sub-models. Selected aspects of Wuxi's current material and water flows were analysed and modelled for energy transformation and the building sector. Current and future climate impacts and vulnerability were investigated. Recent climatic changes and resulting damages were analysed, expected changes in temperature and precipitation in the coming four decades were projected using ensembles of three General Circulation Models. Although Wuxi's government started a path to implement a low carbon plan, the first results show that more ambitious efforts are needed to overcome the challenges faced.
Increasing resource efficiency can potentially deliver important economic and environmental benefits. Many of these benefits are regularly foregone because the financial sector's capacity to adequately take the opportunities and risks arising from resource utilization and related climate change aspects into account has so far remained relatively undeveloped. Focusing on the case of Germany, a number of barriers to the inclusion of resource efficiency and climate change aspects into financial services' considerations are presented. Corresponding measures for improving the capacity of the financial sector to better integrate resource efficiency considerations and climate change related risks into its operating procedures are introduced. The measures encompass the areas of risk controlling, company reporting, institutional reporting requirements, as well as additional supporting measures.
The final report of the research project "Power Sector Decarbonisation: Metastudy" contains the various reports prepared by Öko-Institut and Wuppertal Institute during the course of the SEFEP funded project. A key objective of the project was to make a contribution to the debates within the European Union (EU) and Member States on the EU's Energy Roadmap 2050 publication, which was released in December 2011. This objective was achieved by systematically analysing and comparing recently published scenarios on the European electricity sector commissioned by a range of different stakeholders (environmental NGOs, industry and government agencies).
Domestic sustainability innovations are considered to play a key role for pathways to sustainable consumption. The paper shows how open innovation processes can lead to such sustainable innovations, by means of an experimental and interactive infrastructure. It presents how – based on results of the LivingLab project conducted at the Wuppertal Institute within a European Consortium (Lead TU Delft) - currently an extended Sustainable LivingLab approach is developed and applied in two joint research projects at national and international level. To conceptualise this approach, we refer to recent proceedings in innovation and sustainability research, i.e. practice theory to analyse sustainable product design. Focusing on technical solutions and individual behaviour while assuming people's needs as fixed entities, disregards the dynamics of everyday practices in which technologies themselves create needs. Therefore, the consumer's position should be strengthened through userdriven innovation. LivingLabs are combined lab-/household systems, which put the user, i.e. the home occupant, and value chain related actors (producer, handicraft, etc.) on centre stage in the innovation process. We introduce its research agenda and the Three Phases Model of research. We hypothesise that at the end of this userintegrated innovation process developed products have a higher chance of successful diffusion. To illustrate this, we show how the LivingLab infrastructure is employed for the German InnovationCity Ruhr and how it can promote the development of user-centred sustainable consumption strategies.
City-wide programmes of activities : an option for significant emission reductions in cities?
(2012)
Cities as "real world laboratories" for system innovations : theories, models and empirical designs
(2012)
The concept of regime and "flat ontologies" : empirical potential and methodological implications
(2012)
The paper analyzes a Bolivian region for possible cultivation of the oil plant Jatropha curcas for sustainable biodiesel production in order to replace in part Bolivia's diesel imports. The specific site for this study is located in the dry region of Gran Chaco in Santa Cruz. The aim of this work is to analyse the potential of useable land and resources for sustainable biodiesel production from Jatropha without competition with edibles production using economic, environmental and social criteria. In addition the article introduces Jatropha as one of the preferred oil plants for biodiesel production in several countries and indicates its different uses. The recommendation to cultivate Jatropha for biodiesel production is based on an exploration of the possibility of land use in the selected region and the benefits Jatropha production could offer. In this manner a sustainable cultivation of Jatropha in the region of Gran Chaco is recommended to produce biodiesel and to improve some of the environmental problems facing the region.
This paper attempts to assess whether renewable energy self-sufficiency can be achieved in the crop production and processing sector in Tanzania and if this could be accomplished in an environmentally sustainable manner. In order to answer these questions the theoretical energy potential of process residues from commercially produced agricultural crops in Tanzania is evaluated. Furthermore, a set of sustainability indicators with focus on environmental criteria is applied to identify risks and opportunities of using these residues for energy generation. In particular, the positive and negative effects on the land-use-system (soil fertility, water use and quality, biodiversity, etc.) are evaluated. The results show that energy generation with certain agricultural process residues could not only improve and secure the energy supply but could also improve the sustainability of current land-use practices.
The energy potential of agricultural residues in Tanzania has so far not been evaluated and quantified sufficiently. Moreover, the scientific basis for estimations of the sustainable potential of wastes and residues is still very limited. This paper presents an attempt to evaluate the theoretical and technical potential of residues from the sisal sector in Tanzania with regards to energy recovery through anaerobic digestion. The characteristics and availability of sisal residues are defined and a set of sustainability indicators with particular focus on environmental and socio-economic criteria is applied. Our analysis shows that electricity generation with sisal residues can be sustainable and have positive effects on the sustainability of sisal production itself. All sisal residues combined have an annual maximum electricity potential of 102 GW h in 2009, corresponding to up to 18.6 MW of potential electric capacity installations. This estimated maximum potential is equivalent to about 3 % of the country's current power production. Utilizing these residues could contribute to meeting the growing electricity demand and offers an opportunity for decentralized electricity production in Tanzania.
Energy efficiency services : good practice business models and successful market developments
(2012)
How are neighbours doing? : Making energy efficiency efforts comparable through NEEAP screening
(2012)
The need for an "Energy Roadmap 2050" triggered a multitude of studies that were conducted between 2009 and 2011, which again contained a multitude of decarbonisation scenarios, which achieve the EU's long-term emission mitigation target of reducing greenhouse gas emissions by at least 80% until 2050 (relative to 1990 emissions). The variety of important analysis is difficult to compare and utilize for specific and timely policy decisions. Thus the Smart Energy for Europe Platform (SEFEP) has commissioned a comparative study of relevant energy scenario studies for Europe. The findings of this comparative study are summarized here briefly.
Natural resources are back on the agenda. After the rise of new economic powers such as China, India, and Brazil, global competition has perceptibly increased strategic concerns as regards high commodity prices and possible supply shortages. Germany, the EU, the United States, and many others have formulated raw material strategies that put concern over access and supply at center stage - but the environmental and the socio-political dimensions are widely neglected in these strategies. This paper underlines a new dimension of international relations and pleads for new approaches, called international resource politics, which can be used for ongoing debates concerning green economy and transition strategies.
Material footprint of low-income households in Finland : consequences for the sustainability debate
(2012)
The article assesses the material footprints of households living on a minimum amount of social benefits in Finland and discusses the consequences in terms of ecological and social sustainability. The data were collected using interviews and a questionnaire on the consumption patterns of 18 single households. The results are compared to a study on households with varying income levels, to average consumption patterns and to decent minimum reference budgets. The low-income households have lower material footprints than average and most of the material footprints are below the socially sustainable level of consumption, which is based on decent minimum reference budgets. However, the amount of resources used by most of the households studied here is still at least double that required for ecological sustainability. The simultaneous existence of both deprivation and overconsumption requires measures from both politicians and companies to make consumption sustainable. For example, both adequate housing and economic mobility need to be addressed. Measures to improve the social sustainability of low-income households should target reducing the material footprints of more affluent households. Furthermore, the concept of what constitutes a decent life should be understood more universally than on the basis of standards of material consumption.
Mitigating climate change, investing in development : fostering the CDM in least developed countries
(2012)
Global trade is increasingly being challenged by observations of growing burden shifting, in particular of environmental problems. This paper presents the first worldwide calculations of shifted burden based on material flow indicators, in particular direct and indirect physical trade balances. This study covers the period between 1962 and 2005 and includes between 82 and 173 countries per year. The results show that indirect trade flow volumes have increased to around 41 billion tonnes in 2005. The traded resources with the highest share of associated indirect flows are iron, hard coal, copper, tin and increasingly palm oil. Regarding the burden balance between regions, Europe is the biggest shifter whereas Australia and Latin America are the largest takers of environmental burden due to resource extraction. To evaluate the findings from a global perspective, the results are analysed in terms of resource flow induced environmental pressure related to a country's land area in terms of total and per capita area. Resource endowment and population density seem to be more relevant in determining the physical trade balance, including indirect flows, than income level.
This paper examines the effects of an increased integration of concentrated solar power (CSP) into the conventional electricity systems of Morocco and Algeria. A cost-minimizing linear optimization tool was used to calculate the best CSP plant configuration for Morocco's coal-dominated power system as well as for Algeria, where flexible gas-fired power plants prevail. The results demonstrate that in both North African countries, storage-based CSP plants offer significant economic advantages over non-storage, low-dispatchable CSP configurations. However, in a generalized renewable integration scenario, where CSP has to compete with other renewable generation technologies, like wind or photovoltaic (PV) power, it was found that the cost advantages of dispatchability only justify CSP investments when a relatively high renewable penetration is targeted in the electricity mix.
How much is 100 billion US dollars? : Climate finance between adequacy and creative accounting
(2012)
The multi-level perspective has successfully been applied to the analysis of complex sector transitions in the energy, the health or the food production sector. Is this framework also helpful to understand and give prescriptive advice for sustainability transformations within a national science system? Based on a comprehensive study of the diffusion of transdisciplinary sustainability research in Germany, this article analyzes the institutional dimension of a changing science-society relation in the German science system. It uses the multi-level perspective as a fruitful heuristic in order to identify potential pathways for a broader diffusion of transdisciplinary sustainability science. The importance of niche coalitions of frontrunner universities and research institutes are highlighted.
This paper focuses on market incentives by the introduction of a construction minerals tax as an example of a resource tax. Currently, various European countries levy taxes or duties on primary construction materials, but a harmonisation of the taxation is not planned. Provided the tax rate has a perceptible price effect, the taxation of a resource can foster a demand management or the reduction of the raw material consumption and the governance of side and secondary effects. A construction minerals tax can target the stimulation of demand for secondary raw materials and recycled products, and - because the reuse of construction and demolition waste has technical limits - a stronger emphasis on the conservation of buildings and infrastructures. This has positive effects on the environment and the innovation efforts and it helps to internalise externalities. Germany, used as a case study in this paper, does not raise any taxes on other raw materials than energy sources at the federal level. For this reason, potential impacts of the introduction of a construction minerals tax will be explored and the results of a simulation will be provided.
Transportation is one of the most pressing and least tackled problems for environmental protection and global warming, also in Germany, which is known for its car industry and highways. This thesis analyzes federal legal, fiscal and "soft" measures (such as awareness campaigns) for sustainability in the land transport sector in Germany. It shows the fixation on expensive technical programs such as electric mobility and infrastructure expansion to solve sustainability issues mobility behavior is not attempted to change. Instead of focusing on a traffic avoidance and modal shift, the federal government tries to solve emission problems only by improving engines and technology. The study compares goals and achievements of German politics and political packaging for sustainable transportation and shows that a massive transition in the transport sector is necessary to ensure affordable, socially just and environmentally friendly mobility for everyone.
Purpose - The purpose of this paper is to summarize and discuss the results from the LIVING LAB design study, a project within the 7th Framework Programme of the European Union. The aim of this project was to develop the conceptual design of the LIVING LAB Research Infrastructure that will be used to research human interaction with, and stimulate the adoption of, sustainable, smart and healthy innovations around the home.
Design/methodology/approach - A LIVING LAB is a combined lab-/household system, analysing existing product-service-systems as well as technical and socioeconomic influences focused on the social needs of people, aiming at the development of integrated technical and social innovations and simultaneously promoting the conditions of sustainable development (highest resource efficiency, highest user orientation, etc.). This approach allows the development and testing of sustainable domestic technologies, while putting the user on centre stage.
Findings - As this paper discusses the design study, no actual findings can be presented here but the focus is on presenting the research approach.
Originality/value - The two elements (real homes and living laboratories) of this approach are what make the LIVING LAB research infrastructure unique. The research conducted in LIVING LAB will be innovative in several respects. First, it will contribute to market innovation by producing breakthroughs in sustainable domestic technologies that will be easy to install, user friendly and that meet environmental performance standards in real life. Second, research from LIVING LAB will contribute to innovation in practice by pioneering new forms of in-context, user-centred research, including long-term and cross-cultural research.
Concerns over climate change and the security of industrial feedstock supplies have been opening a growing market for biobased materials. This development, however, also presents a challenge to scientists, policy makers, and industry because the production of biobased materials requires land and is typically associated with adverse environmental effects. This article addresses the environmental impacts of biobased materials in a meta-analysis of 44 life cycle assessment (LCA) studies. The reviewed literature suggests that one metric ton (t) of biobased materials saves, relative to conventional materials, 55 ± 34 gigajoules of primary energy and 3 ± 1 t carbon dioxide equivalents of greenhouse gases. However, biobased materials may increase eutrophication by 5 ± 7 kilograms (kg) phosphate equivalents/t and stratospheric ozone depletion by 1.9 ± 1.8 kg nitrous oxide equivalents/t. Our findings are inconclusive with regard to acidification (savings of 2 ± 20 kg sulfur dioxide equivalents/t) and photochemical ozone formation (savings of 0.3 ± 2.4 kg ethene equivalents/t). The variability in the results of life cycle assessment studies highlights the difficulties in drawing general conclusions. Still, common to most biobased materials are impacts caused by the application of fertilizers and pesticides during industrial biomass cultivation. Additional land use impacts, such as the potential loss of biodiversity, soil carbon depletion, soil erosion, deforestation, as well as greenhouse gas emissions from indirect land use change are not quantified in this review. Clearly these impacts should be considered when evaluating the environmental performance of biobased materials.
Purpose - Iran as an energy-rich country faces many challenges in the optimal utilization of its vast resources. High rates of population and economic growth, a generous subsidies program, and poor resource management have contributed to rapidly growing energy consumption and high energy intensity over the past decades. The continuing trend of rising energy consumption will bring about new challenges as it will shrink oil export revenues, restraining economic activities. This calls for a study to explore alternative scenarios for the utilization of energy resources in Iran. The purpose of this paper is to model demand for energy in Iran and develop two business-as-usual and efficiency scenarios for the period 2005-2030.
Design/methodology/approach - The authors use a techno-economic or end-use approach to model energy demand in Iran for different types of energy uses and energy carriers in all sectors of the economy and forecast it under two scenarios: business as usual (BAU) and efficiency.
Findings - Iran has a huge potential for energy savings. Specifically, under the efficiency scenario, Iran will be able to reduce its energy consumption 40 percent by 2030. The energy intensity can also be reduced by about 60 percent to a level lower than the world average today.
Originality/value - The paper presents a comprehensive study that models the Iranian energy demand in different sectors of the economy, using data at different aggregation levels and a techno-economic end-use approach to illuminate the future of energy demand under alternative scenarios.
This paper addresses future perspectives for the management of resources on an international level. Failures of international open markets result in significant material leakage. Here, taking the example of material used vehicles, we develop elements of an international metal covenant that should allow for a more sustainable management of global material flows in that area. Our proposal is based on two principles: any regulation should actively seek industry participation, taking advantage of business interest in supplying a sufficient quantity of materials while lowering materials costs; and it should also address public issues such as sustainability of recycling and waste. In this paper we first analyse contracts as a tool for bridging gaps in knowledge when multiple actors are involved. We then give empirical evidence for material leakage in the case of used vehicles from Germany, before outlining the elements of a proposed international metals covenant. Finally, we analyse potential impacts and discuss legal and institutional issues.