Refine
Year of Publication
Document Type
- Contribution to Periodical (1855)
- Report (1509)
- Part of a Book (1505)
- Peer-Reviewed Article (864)
- Working Paper (654)
- Conference Object (428)
- Book (192)
- Doctoral Thesis (110)
- Master Thesis (43)
- Periodical Part (17)
Language
Division
Seit der im Jahr 1972 erschienenen Studie "Grenzen des Wachstums" hat sich die ökologische Debatte stark auf die Gefahr der Verknappung von Rohstoffen konzentriert. Die neuere Umweltforschung zeigt, dass noch weit vor dem Ende der fossilen Rohstoffe andere Umweltgrenzen überschritten werden. Der Beitrag widmet sich den sich daraus ergebenden Konsequenzen für Unternehmen.
Navigating within planetary boundaries : transformation into a post-fossil economy as a challenge
(2013)
This study presents in detail: the use of plastic products and the opportunities for recyclate use in the construction sector, quantities of plastic used, take-back systems, recycling techniques, current recyclate use and plastic construction product packaging.Potentials for increasing high-quality recyclate use were identified. Existing hurdles and options for action for industry and politics are presented. Current recyclate use as well as its potential use are strongly dependent on the application area of plastics. The biggest hurdles for the use of recycled materials are product life time, dismantling and technical requirements.
In dieser Studie werden detailliert dargestellt: die Verwendung von Kunststoffprodukten und Möglichkeiten des Rezyklateinsatzes im Baubereich, verwendete Kunststoffmengen, Rücknahmesysteme, Verwertungstechniken, aktueller Rezyklateneinsatz und Bauproduktverpackungen aus Kunststoff. Potentiale zur Steigerung des hochwertigen Rezyklateinsatzes wurden identifiziert und bestehende Hürden und Handlungsoptionen für Politik und Wirtschaft dargestellt. Aktueller Rezyklateinsatz sowie technische und mengenmäßige Potentiale sind stark abhängig vom Einsatzbereich der Kunststoffe. Die größten Hürden für einen Rezyklateinsatz sind dabei Produktlebensdauer, Rückbaufähigkeit und technische Anforderungen.
The construction sector is the second largest area for the application for plastics. Due to the long life times of construction products, the implementation of the circular economy faces its own challenges. To investigate this challenge, the study covers a market study for Germany, voluntary take-back and recycling schemes of construction products, as well as the use of plastic recyclates in construction products. In addition, plastic packaging of construction products is covered. Opportunities and barriers to the use of recycled plastics in construction products are derived from the intersection of available technologies, recyclate supply, and technical requirements for construction products. The report concludes with recommendations to various stakeholders on how to promote the use of recyclates in construction products and their packaging. Important points here are the introduction of a recyclate quota for films as construction product packaging and the description of recycling possibilities and recyclate content in the technical documentation of construction products.
The earth as we know it can only continue to exist if humanity finds a way to switch to a sustainable use of energy and resources. This work contributes to the research carried out to achieve this goal by improving the coating of adsorptive materials. These are used in heat transformation and drying processes that allow for efficient temperature and humidity control in buildings. A central component of these adsorptive coatings is the binder that acts as "glue" in the manufacturing of the coating. In this work the methods to evaluate binder performance regarding their thermal stability under the process conditions, their mechanical stability and their influence on the adsorptive properties of the coating were established. The coatings have to meet special requirements due to the thermal stresses and low pressure atmosphere they experience in these applications. A selection of silicone binders was then characterized with the established tests according to these requirements. Additionally a selection of inorganic binders was investigated because they allow for the use of high desorption temperatures and thus a high energy efficiency of the process. Out of these binders Silres® MP50E emerged as the most promising one due to very good adsorptive properties of the coating, its good temperature stability and ease of use. While some of the inorganic binders showed very good adsorptive properties and temperature stability the mechanical stability of all inorganic binders was not sufficient for their use in adsorption heat transformation technology. This is the first time that a broad selection of binders was evaluated with regards to adsorptive coatings and the results published in literature. With a suitable binder identified, the next step was to optimize the coating of the heat exchangers in order to work out how to manufacture the most efficient and powerful heat exchangers. Samples with different coating thicknesses were manufactured in small scale and full scale and their adsorption behavior was characterized. It could be shown for the first time that it is possible to increase energy efficiency by improving the mass ration of adsorber to coating and increase the delivered power at the same time. This was shown for small and full scale samples. It was shown that under the corresponding conditions the heat transfer from the coating layer to the adsorber metal substrate is the limiting step in the process. These results can now be used for the planning and construction of adsorbers. With knowledge of a suitable binder and how to coat efficient, powerful adsorbers, the coating process itself was improved to allow for industrial scale manufacturing. A central point here is the ability to control slurry rheology. Out of many rheology additives those that are suited for the application in adsorption heat transformation were identified and their influence on the slurry rheology thoroughly characterized. Additionally the process of slurry preparation could be simplified for several different adsorbents. Here it was shown that the supersonic deagglomeration step is not necessary to prepare a slurry. Extending the possible coating techniques and in addition to the dip coating process used so far, the spray coating of adsorptive coatings was established for the first time in literature. This process is widely used in the industry and allows for easier plugin into existing coating processes. For the coating of high resolution patterns a proof of concept of the screen printing process was carried out.
The study "Towards a Single and Innovative European Transport System" is developing action plans for the establishment of an integrated transport system in Europe. This report was created in a joint effort between VDI/VDE Innovation + Technik GmbH (Germany), Wuppertal Institute for Climate, Environment and Energy (Germany) and the Centre of Research and Technology Hellas, CERTH (Greece) on behalf of the European Commission's DG MOVE. Focus of the report is the international assessment of six different countries - Brazil, China, India, Japan, South Korea, USA - in five focus areas across all transportation modes. It provides actions plans on how to overcome existing European barriers towards a single and innovative European Transport System based on best practices and lessons learned in the countries under study. In addition to the actions plans, the study also provides recommendations for international collaboration.
Flexibel, mobil und unbezahlt : eine feministische Studie zur Mobilität der Reproduktionsarbeit
(1996)
Warum ist es so schwer, die Entwicklung von Regionen nachhaltig zu gestalten? Was blockiert die vielen Bemühungen? Inwiefern sind diese Blockaden auf dichotome Wahrnehmungs-, Denk- und Handlungsmuster zurückzuführen, die von Hierarchien durchzogen sind? Und wie lassen sich diese Blockaden überwinden? Zu diesen Fragen hat der Forschungsverbund "Blockierter Wandel?" in der Region Mulde-Mündung in Ostdeutschland Antworten erarbeitet, die in diesem Buch vorgestellt werden.
In der Zusammenarbeit der Forschenden mit zahlreichen Menschen der Region wurden in den Praxisfeldern Arbeit, Wasserver- und -entsorgung, Bildung, Landschaftsnutzung sowie im Hochwasserschutz Potenziale für Nachhaltigkeit ausgemacht, die sich zwischen bestehenden dichotomen Strukturen entfalten. In diesen Zwischenräumen werden Ziele und Prozesse einer sozial-ökologischen Transformation im gemeinsamen Lernen entworfen und gestaltet.
Nachhaltige Regionalentwicklung, so die Ergebnisse der kritischen Analyse und konstruktiven Perspektive des Forschungsverbundes, erfolgt über die Ermöglichung, Sicherung und Stabilisierung solcher Zwischenräume.
Einführung
(2014)
Die Energiewende ist einer der größten Transformationsprozesse, die unsere Gesellschaft in Zukunft bewältigen muss. Sie ist als Gemeinschaftsprojekt zu sehen, in das unterschiedlichste Akteure in verschiedener Art und Weise eingebunden sein sollten. Die Bundesregierung setzt die Ziele und kann Rahmenbedingungen schaffen, die Umsetzung der Energiewende findet aber in den Städten und Gemeinden vor Ort statt. Dazu ist insbesondere bürgerschaftliches Engagement gefordert, welches durch Politik und Planung gefördert und unterstützt werden sollte.
In ländlichen Räumen unterscheiden sich die Herausforderungen dabei noch einmal deutlich von denen in urbanen Gebieten. Auch die Möglichkeiten und Potenziale für den Ausbau erneuerbarer Energien sowie von Energieeffizienzmaßnahmen sind teilweise aufgrund anderer Gegebenheiten und Ressourcen sehr unterschiedlich.
Die vorliegende Arbeit beschäftigt sich vor dem Hintergrund der Transitions-Forschung insbesondere mit der Frage, wie bürgerschaftliches Engagement für neue Energieprojekte in ländlichen Räumen angestoßen werden kann und welches Potenzial das Instrument der visuellen Kartographie in diesem Zusammenhang besitzt.
Die Analysen erfolgten im Untersuchungsraum Südwestfalen, in dem zum einen die Praxisstudie "Dorf ist Energie(klug)" dazu diente, Potenziale bürgerschaftlichen Engagements in ländlichen Räumen herausfiltern und bewerten zu können. Zum anderen konnte die mögliche Rolle digitaler Visualisierungen zur Förderung bürgerschaftlichen Engagements anhand bestehender Visualisierungsinstrumente im Untersuchungsraum analysiert werden.
Basierend auf den Analyseergebnissen wurde ein "Bürgerenergiekompass" für den Hochsauerlandkreis erarbeitet. Dieser stellt als Ergebnis der Arbeit ein Beispiel für ein Visualisierungsinstrument dar, das möglichst viele Anforderungen erfüllt, um bürgerschaftliches Engagement insbesondere in den ländlichen Räumen Südwestfalens zur Umsetzung der Energiewende zu fördern.
In diesem Gutachten wurde untersucht, welche Optionen zur Gestaltung eines marktbasierten haushaltsunabhängigen Verpflichtungsansatzes zur CO2-Minderung im deutschen Gebäudebestand bestehen. Die Analyse erfolgte technologieoffen und berücksichtigte neben Sanierungsmaßnahmen zur Steigerung der Energieeffizienz auch einen verstärkten Einsatz CO2-armer/erneuerbarer Energien. Das Verpflichtungssystem soll in der Lage sein, die bestehenden Treibhausgas (THG)-Minderungsziele im Gebäudebestand möglichst kostengünstig auf kurz- und langfristig sinnvolle Weise zu erreichen und sich gut in das bestehende Förderinstrumentarium integrieren lassen.
Die energieintensive Industrie kann zum Ausgleich volatiler Stromeinspeisungen und somit zum Gelingen der Energiewende beitragen.
Digitalisierungsprozesse ermöglichen die Flexibilisierung der Produktion, wodurch die Stromnachfrage steuerbarer wird.
Gegenwärtig sind die Anreize zur Flexibilisierung jedoch für die meisten Unternehmen aufgrund von Investitionsunsicherheiten und der Konkurrenz durch konventionelle Kraftwerke gering.
Im Rahmen der Transformation des Energiesystems und zunehmender Digitalisierung der Produktion wird die Flexibilisierung für Industrieunternehmen perspektivisch attraktiver.
Digitalisierung und Flexibilisierung haben Auswirkungen auf Beschäftigte. So werden bereits jetzt Tätigkeiten an eine Abschaltung von Anlagen zur Stabilisierung des Stromsystems angepasst.
Im Hinblick auf Digitalisierungsprozesse gilt es, Mitarbeiter frühzeitig zu beteiligen und Ängste sowie Anregungen der Beschäftigten ernst zu nehmen.
Die Akzeptanz von Veränderungsprozessen kann durch eine frühzeitige Einbindung der Beschäftigten und ihrer Vertretung gefordert werden.
Ein den Digitalisierungsaktivitäten entsprechendes Personalkonzept stellt sicher, dass Beschäftigte mit notwendigem Know-how ausgestattet werden.
Die Wärmewende ist als Teil der Energiewende ein gesellschaftliches Großprojekt. Für eine erfolgreiche Umsetzung benötigt die Wärmewende im Vergleich zur Stromwende vielfältigere und differenziertere Handlungsmechanismen. Es geht dabei nicht nur um den Ersatz fossiler Energieträger im Bereich der Wärmeversorgung durch regenerative Quellen, sondern vielmehr um einen systemischen Ansatz, der zudem eine stringente Forcierung von Energieeffizienzmaßnahmen, eine optimierte Verzahnung von Strom- und Wärmesystemen sowie eine zielgruppenspezifische Adressierung und Sensibilisierung von Akteursgruppen (hier: Kommunen, Privathaushalte, Industrie, GHD) erforderlich macht.
The production of commodities by energy-intensive industry is responsible for 1/3 of annual global greenhouse gas (GHG) emissions. The climate goal of the Paris Agreement, to hold the increase in the global average temperature to well below 2 °C above pre-industrial levels while pursuing efforts to limit the temperature increase to 1.5 °C, requires global GHG emissions reach net-zero and probably negative by 2055-2080. Given the average economic lifetime of industrial facilities is 20 years or more, this indicates all new investment must be net-zero emitting by 2035-2060 or be compensated by negative emissions to guarantee GHG-neutrality. We argue, based on a sample portfolio of emerging and near-commercial technologies for each sector (largely based on zero carbon electricity & heat sources, biomass and carbon capture, and catalogued in an accompanying database), that reducing energy-intensive industrial GHG emissions to Paris Agreement compatible levels may not only be technically possible, but can be achieved with sufficient prioritization and policy effort. We then review policy options to drive innovation and investment in these technologies. From this we synthesize a preliminary integrated strategy for a managed transition with minimum stranded assets, unemployment, and social trauma that recognizes the competitive and globally traded nature of commodity production. The strategy includes: an initial policy commitment followed by a national and sectoral stakeholder driven pathway process to build commitment and identify opportunities based on local zero carbon resources; penetration of near-commercial technologies through increasing valuation of GHG material intensity through GHG pricing or flexible regulations with protection for competitiveness and against carbon leakage; research and demand support for the output of pilot plants, including some combination of guaranteed above-market prices that decline with output and an increasing requirement for low carbon inputs in government procurement; and finally, key supporting institutions.
Urban energy systems have been commonly considered to be socio-technical systems within the boundaries of an urban area. However, recent literature challenges this notion in that it urges researchers to look at the wider interactions and influences of urban energy systems wherein the socio-technical sphere is expanded to political, environmental and economic realms as well. In addition to the inter-sectoral linkages, the diverse agents and multilevel governance trends of energy sustainability in the dynamic environment of cities make the urban energy landscape a complex one. There is a strong case then for establishing a new conceptualisation of urban energy systems that builds upon these contemporary understandings of such systems. We argue that the complex systems approach can be suitable for this. In this paper, we propose a pilot framework for understanding urban energy systems using complex systems theory as an integrating plane. We review the multiple streams of urban energy literature to identify the contemporary discussions and construct this framework that can serve as a common ontological understanding for the different scholarships studying urban energy systems. We conclude the paper by highlighting the ways in which the framework can serve some of the relevant communities.
Klimaneutralität : Optionen für eine ambitionierte Weichenstellung und Umsetzung : Positionspapier
(2021)
Öko-Kaufhäuser als Dienstleistungserfüllungsorte : mit Dienstleistungen zur Nachhaltigkeit im Handel
(1999)
Innerhalb des Projekts TFE-NRW bewertete das Wuppertal Institut den Forschungsbedarf für Energiewende-Technologien in Nordrhein-Westfalen. Ziel war es herauszufinden, welche Technologien und Forschungsbereiche im Rahmen der Energieforschung für Nordrhein-Westfalen (NRW) einen besonders hohen Stellenwert in Relation zur Bewertung für Deutschland haben könnten und für die eine besondere Unterstützung innerhalb der Energieforschung gerechtfertigt erscheint. Dabei sollten die speziellen Anforderungen des Bundeslandes berücksichtigt werden.
Betrachtet wurden 31 Technologiefelder aus den Bereichen erneuerbare Energien, konventionelle Kraftwerke, Infrastruktur, Technologien für die Sektorenkopplung (Power-to-X, P2X), energie- und ressourceneffiziente Gebäude, Energie- und Ressourceneffizienz in der Industrie und integrative Aspekte, die mithilfe eines Kriterienrasters qualitativ bewertet wurden.
About 2 % of the overall electricity consumption of the EU is caused by circulators in single or double family homes and flats. A new technology of pumps with electronically commutated (EC) motor pumps is available now; it is one possible way to achieve a reduction in circulator annual electricity use by 60 % or more.
The project's objective is a market transformation towards this new very energy-efficient pump technologies - Energy+ pumps - for circulators in heating systems, both stand alone and integrated in boilers. Only few manufacturers have so far introduced the new pump technology to the market for single or double family homes and flats.
To bring more products to the market from all major manufacturers, the project will adapt and apply the technology procurement methodology as it was very successfully tested in the European Energy+ project on energy-efficient cold appliances.
Large buyers will be aggregated, to activate the pump and boiler manufacturers. Sales and training materials and a sizing spreadsheet software for installation contractors will be developed and applied. A competition both for energy-efficient products and marketing campaigns will be organised and the information on the Energy+ pumps will be disseminated widely through website, newsletter, media, and fairs.
This paper gives a short overview of this project and presents the results of the first project phases: a European wide market study on circulators and heating systems, and the first Energy+ lists for circulators, buyers and supporters.
Energy+ pumps : technology procurement for very energy efficient circulation pumps ; final report
(2009)
Refrigerators and freezers (subsumed under the term "cold appliances") are among the most widely used electrical appliances in the residential sector all around the world. Currently, about 1.4 billion domestic cold appliances worldwide use about 650 TWh electricity, which is 1.2 times Germany’s total electricity consumption, and cause CO2 emissions of 450 million tons of CO2eq.
Although the specific electricity consumption per volume of cold appliances has decreased during recent years due to technical progress and policy instruments like labelling and eco-design requirements, total worldwide energy consumption of these appliances is on the increase. Scenario calculations were carried out for 10 world regions by the Wuppertal Institute. Results show that about half of the energy consumption could be saved with the most energy-efficient appliances available today, and even higher savings will be possible with next generation technologies by 2030. According to the analysis, these savings are usually very cost-effective.
All these aspects are part of the new website "bigEE.net - Your guide to energy efficiency in buildings" which aims to provide information about technical options but also about policies to support the development of energy-efficient appliances.
To initiate and foster market transformation of energy-efficient appliances it is highly advisable for policymakers to generate appliances-specific policy packages. Since each regional market has its specificity (e.g. energy prices, typical appliance affecting the cost effectiveness of efficient appliances), the barriers for the market transformation of single product groups are also specific and need to be addressed by appropriate policies and measures. Elements of measures to build appropriate specific policy packages for refrigerators will be presented in the paper, and the refrigerator package from California (USA) demonstrates the successful implementation of a sector-specific package.
In addition to the expansion of renewable energies, the efficient use of energy is crucial in order to ensure energy transition successful. The Federal Government of Germany has therefore set itself clear objectives with the National Energy Efficiency Action Plan (NAPE), which aims to reduce the primary energy consumption in Germany - compared to 2008 levels - by 20 per cent until 2020, and by 50 per cent until 2050. In addition, greenhouse gas emissions should fall by 40 per cent compared to 1990.
To reach this goal, the German Federal Ministry of Economic Affairs and Energy (BMWi) inter alia launched the "National Top Runner Initiative (NTRI)" in January 2016. It is an important component and concerns private homes, as well as industry, retail and services.
The NTRI is intended to bring energy efficient and high-quality appliances (so called Top Runners) onto the market more quickly, thus accelerate market replacement. For this purpose, motivation, knowledge and competence in product-related energy efficiency is to be strengthened and expanded along the whole value chain - from the appliance manufacturer to the retailer and the consumer. Manufacturers are pushed to develop more efficient products and consumers get valuable information about Top-Runner products and how they can benefit. In this context, retailers are especially relevant as they act as "gatekeeper" between manufacturers and consumers. They play a key role in advancing an energy efficient production and consumption. They do not only select the products but they also have a direct contact to consumers and influence the purchase decision. In this paper, special emphasis will be put on the role of retailers and the efforts of the National Top Runner Initiative will be illustrated. Barriers and incentives to motivate this target group will be elaborated.
The overall objective of the web-based consumer information tool Euro-Topten is to promote the market transformation towards energy efficient products. Euro-Topten informs consumers about the most energy efficient products in various categories and thereby aims to directly influence the purchasing decisions of individuals or professional buyers.
Providers of internet-based information tools are confronted with the problem, that there is no bidirectional interaction with the users. Hence, it is difficult to evaluate if the specific needs of users are addressed, if and how the user processes this information and to what extent the information influences the user's decision making process.
To study these questions, a web-based survey was conducted in two consecutive rounds. In the first round the survey focused on the assessment of the information tool itself and the motivation for using the Euro-Topten websites. This survey was online on all active Euro-Topten partner websites from October to December 2012. In total, 1791 users completed the survey.
In the second round, a subset of the survey population was queried again. 1,043 participants agreed to take part in a more comprehensive follow up survey, 383 completed the second survey between May and July 2013. The second survey concentrated on the question how Euro-Topten has influenced the purchasing behaviour of the survey participants. This gave significant insights on how the information on the Euro-Topten websites has affected purchasing decisions of the surveyed users.
Based on a comparison of performance indicators of the most efficient products recommended on the Euro-Topten websites with performance indicators of a base case product available on the market, avoided energy demand could be estimated for those users, who bought products from the Euro-Topten list. Based on these results, two impacts of Euro-Topten could be estimated: The influence of Euro-Topten on purchasing decision of users and the associated reductions in energy demand and CO2-emissions.
Die Ökodesign-Richtlinie (Richtlinie 2009/125/EG des Europäischen Parlaments und des Rates vom 21. Oktober 2009 zur Schaffung eines Rahmens für die Festlegung von Anforderungen an die umweltgerechte Gestaltung energieverbrauchsrelevanter Produkte) trat im Jahre 2005 in Kraft und wurde im Jahr 2009 revidiert und erweitert. Die Richtlinie zielt auf Verbesserungen des Designs energieverbrauchsrelevanter Produkte mit dem Ziel einer Reduktion der Umweltbelastungen unter Berücksichtigung aller Phasen des Produktlebenszyklusses. So sind bereits im Rahmen dieser Richtlinie beispielsweise Mindestenergieeffizienzanforderungen für bestimmte, auf dem europäischen Markt angebotene Geräte festgelegt worden, die von den Geräteherstellern und -importeuren eingehalten werden müssen.
Brasiliens Nachfrage nach Strom ist in den vergangenen Jahren stark gewachsen. Auch für die kommenden Jahre ist mit einer weiteren Steigerung von jährlich etwa 3,5 Prozent der Nachfrage zu rechnen. Dies stellt das Land vor eine große Herausforderung. Zusätzlich steht die auf Wasserkraft basierende Stromerzeugung des Landes aufgrund geringer Niederschläge und Wasserstandsmengen vor einem Engpass. Deshalb kommen fossilthermische Reservekraftwerke insbesondere seit dem vergangenen Jahr verstärkt zum Einsatz und verteuern die Stromerzeugung erheblich.
Auch der Ausbau nicht-konventioneller Erneuerbarer Energien zur Diversifizierung der Strommatrix läuft in Brasilien nur sehr langsam an. Eine Planung zur systematischen Integration verschiedener Erneuerbarer Energieträger findet bislang aber nicht statt.
Ziel der Studie ist es deshalb, das zusätzliche THG-Einsparpotenzial durch die systematische Integration von Erneuerbaren Energien, gegenüber dem Business as Usual Szenario (Ausbau der Erneuerbaren ohne systematische Integration) zu ermitteln und in einer Broschüre für ein breites Publikum aufzuarbeiten.
Options and potentials for energy end-use efficiency and energy services : summary ; final report
(2006)
Solar-Sparprojekt macht Schule : Privatkapital finanziert erneuerbare Energien in den Kommunen
(2007)
Nicht erst seit dem Klimaabkommen von Paris, welches im Kern eine Begrenzung der menschengemachten globalen Erwärmung auf deutlich unter 2 °C gegenüber vorindustriellen Werten vorsieht, ist offensichtlich, dass eine umfassende Transformation der meisten Wirtschaftssektoren erforderlich ist, um die gesteckten Ziele zu erreichen. Die Transformation erfolgt dabei zum einen durch Steigerung der Energieeffizienz und zum anderen durch eine Dekarbonisierung der bestehenden Prozesse, bei denen heute noch ein hoher Anteil fossiler Energien eingesetzt wird - dies kann gelingen durch eine weitreichende Sektorkopplung, Flexibilisierung und Elektrifizierung bei vollständiger Nutzung Erneuerbarer Energien.
Letzteres stellt auch die Energieversorgung in Rheinland-Pfalz vor einen Paradigmenwechsel: Die schrittweise Transformation eines von konventionellen Energieträgern geprägten Versorgungsystems zu einem durch Erneuerbare Energien dominierten System. Als eines der ersten Bundesländer hat sich Rheinland-Pfalz bereits im Jahr 2014 ein eigenes Klimaschutzgesetz gegeben sowie erstmals im Jahr 2015 ein Landesklimaschutzkonzept (LKSK) erarbeitet, welches energiepolitische Leitplanken für den angestoßenen Transformationsprozess setzt. Die vorliegende Studie im Auftrag des Ministeriums für Umwelt, Energie, Ernährung und Forsten Rheinland-Pfalz beleuchtet die Auswirkungen eines weiteren Ausbaus der Erneuerbaren Energien in Rheinland-Pfalz und der damit verbundenen Flexibilisierung und Dekarbonisierung unterschiedlicher Anwendungsfelder, insbesondere in der Industrie aber auch im ÖPNV und zentraler Wärmeversorgung.
Die amtliche Statistik der Bundesrepublik liefert mit den umweltökonomischen Gesamtrechnungen (UGR) ein modulares Rahmenwerk, das wichtige, aber fragmentarische Daten zu einzelnen Umweltbelastungen liefert. Die in Tonnen aggregierten Rohstoffnutzungen und Emissionen zeigen Trends und Ursachen für verschiedene Belastungen, können aber nicht das weltweit anerkannte Leitbild nachhaltigen Wirtschaftens operationalisieren. Hierfür bietet sich die von den Vereinten Nationen propagierte integrierte umweltökonomische Gesamtrechnung (IUGR) an. Vor deren Implementierung schrecken allerdings sowohl die amtlichen Statistiker als auch ein eigens eingesetzter wissenschaftlicher Beirat noch zuruück. Der hier vorgelegte Überblick über die Methodik und Aussagekraft der IUGR stellt dar, wie Nachhaltigkeit als Erhaltung des produzierten und Naturkapitals definiert und gemessen werden kann - konsistent und daher vergleichbar mit den wichtigsten Wirtschaftsindikatoren. Eine Pilotstudie der IUGR illustriert dies für Deutschland. Sie zeigt ferner am Beispiel der Ökosteuer, wie Umweltkosten für den rationalen Einsatz von Marktinstrumenten der Nachhaltigkeitspolitik verwendet werden können.
Sustainable development is the globally embraced paradigm for integrating environment and development policies. Agreement ends with attempts at operationalizing the elusive notion of sustainability. A contentious debate among "environmentalists" and "environmental economists" has brought about a confusing proliferation of indicators and policy advice on sustainable development. Greening the monetary national accounts could moderate the debate by generating concepts and indicators which translate environmental concerns into the language of widely used economic variables. The implementation of sustainable growth and development requires more. "Eco-nomic" instruments of environmental cost internalization need to be combined with environmental legislation and regulation. Such reconciliation of environmental and economic policies should be supported by a "social compact" between government and civil society. The sustained implementation of sustainable development depends on it.
Statisticians avoid getting involved in data analysis, leaving data users on their own in interpreting the results of their work. This is particularly unfortunate in a new area of applied statistics such as environmental accounting with which few are really familiar. Earlier this year data producers and users explored, in a national seminar, possible policy applications of the results of a "green accounting" project in the Philippines. The main findings of the author's contribution to the seminar, on which the present paper is based, are that environmental accounts: (1) present evidence of sustainable economic performance in the country during the relatively short-time period of 1988–1994; (2) provide information for environmental cost internalization; (3) may guide investment to environmentally sound production processes; (4) help to specify and monitor policies of natural wealth conservation, distribution and management; and (5) reveal major data gaps. The paper concludes that environmental accounts help to assess the sustainability of economic growth in terms of broadly defined capital maintenance. The sustainability of development, however, would have to be measured by alternative or supplementary physical indicators linked to quantifiable standards or targets.
Sustainable development is the globally embraced paradigm for integrating environment and development policies. Agreement ends with attempts at quantifying the elusive notion of sustainability. A contentious debate among "environmentalists" and "environmental economists" has brought about a confusing proliferation of indicators and policy advice on sustainable development. Generating a common language by means of integrated physical and monetary environmental accounting could moderate the debate. Economic and ecological sustainability is thus distinguished and operationalised in terms of capital maintenance and dematerialisation of economic activity. Empirical results presented are not conclusive, however. Moreover, the reconciliation of environmental and economic policies requires more than comparable statistics strategies and instruments of environmental cost internalisation need to be evaluated and combined with those of raising resource productivity. A social compact between government and civil society should provide the necessary support for achieving consensus and partnership. The sustained implementation of sustainable development depends on it.
The reductionist trend of equalizing sustainable development with CO2 control needs to be reversed - notwithstanding the significance of climate change. Conventional, "compartmentalized" data systems impede an integrated vision and treatment of the paradigm. New accounts and balances focus on the interaction between environment and economy. "Greened" national accounts measure economic sustainability in terms of (produced and natural) capital maintenance; balances of material flows assess ecological sustainability as the dematerialization of production and consumption. Both concepts aim to preserve environmental assets. They differ however with regard to the scope, strength and evaluation of sustainability. First results for Germany indicate weak sustainability of the economy, owing to an increasing capital base. Strong sustainability is not in sight, though, since material throughput has not been reduced sufficiently. An "Alliance for Sustainable Development" is proposed to implement and sustain the paradigm.
The reductionist trend of equating sustainable development with sustained economic growth needs to be reversed. New accounts and balances help to operationalize the elusive notion of sustainability: they provide a coherent picture of the interaction between environment and economy. "Greened" national accounts measure economic sustainability in terms of (produced and natural) capital maintenance; balances of material flows assess ecological sustainability as the dematerialization of production and consumption. Both concepts aim to preserve environmental assets, but differ in scope, strength and evaluation of sustainability. First results for Germany indicate weak sustainability of the economy; strong sustainability is not in sight because of insufficient reduction of material throughput. Attaining sustainability through integrated policies needs the support of share- and stakeholders of sustainable development.
Green accounting and energy
(2004)
Modelling a socially and environmentally sustainable Europe : final report part II: Technical report
(1998)
This report details current and potential recycling of critical metals in Waste from Electrical Electronic Equipment (WEEE). The term "critical metals" is used instead of "rare metals" because the concept incorporates not only supply but also demand. The EU needs access to these metals and recycling can be an important part of the supply-strategy.
The study shows that the current recycling of critical metals in WEEE is very low, but that the potential amount could be increased threefold within 2015. Improving of the recycling of critical metals requires a variety of initiatives tackling different week point in the overall process: better collection, better pre-processing and end-processing, limiting the export of WEEE or used products out of the EU and better design of the EEE-products.
This study shows that data on sales volumes, WEEE composition and the composition of critical metals in EEE is currently insufficient for detailed analysis and monitoring, and addressing this should be a priority. Further, more detailed information on components used in EEE product groups would enable recyclers to identify and access the most materially important components. Dialog between recyclers, smelters and manufacturers could also facilitate product design that supports the recycling process.
Aufgrund der Wechselwirkungen mit sozialen, ökonomischen und ökologischen Zielen ist die Kreislaufwirtschaft möglicherweise ein Handlungsbereich mit systemischer Schubkraft für die integrierte Nachhaltigkeitsentwicklung von NRW. Sie ist deswegen auch für die Umsetzung der NRW-Nachhaltigkeitsstrategie, die 2016 zum ersten Mal aufgelegt und 2020 aktualisiert wurde, von besonderem Interesse. Aus diesem Grund hat sich das Wuppertal Institut im Rahmen des Forschungsprojekts "Nachhaltigkeitsstrategie NRW - Vertiefungsanalysen zur Umsetzung aus wissenschaftlicher Sicht" in einem Forschungsmodul mit der Umsetzung der Kreislaufwirtschaft im Kontext der Gesamtwirtschaft von NRW beschäftigt und hier insbesondere die Auswirkungen des europäischen, politischen Rahmens auf die Aktivitäten in NRW in den Blick genommen. Mit anderen Worten, das nachfolgende Arbeitspapier nimmt den European Green Deal und seine Bedeutung für NRW in den Blick und fragt: Welche Herausforderungen für NRW lassen sich aus dem Green Deal ablesen, wie und in welchen Sektoren kann/soll NRW eine Transformation zur Kreislaufwirtschaft einleiten und welche Bedingungen müssen dabei beachtet werden? Methodisch basiert diese Auswertung auf der Analyse relevanter Primärdokumente sowie der Sekundärliteratur zur Umsetzung der Kreislaufwirtschaft im politischen Mehrebenensystem. Dabei soll das Papier kein industriepolitisches Innovationsprogramm entwerfen, sondern eine Handreichung zur weiteren Diskussion von potenziellen Maßnahmen und Politikvorschlägen im Hinblick auf die zu entwickelnde Kreislaufwirtschaftsstrategie darstellen.
On the basis of a literature research, this subtask develops a conceptional framework for a common understanding of CE within the project team and for the following work packages and tasks. After a brief introduction into the objectives and the context of a circular economy, a more elaborated look into the necessity of an explicit understanding of CE, the objectives, the spatial perspective of CE and the specific challenges within the CICERONE context will be done, in order to develop a basis for a common understanding within the project context. Circular economy can and has to be understood as an (eco-)innovation agenda. Therefore, the paper investigates the role policy has to play to support innovation for a CE transition, for creating the framework conditions and why CE has also to be build from the ground up. Finally, the paper looks from two perspectives at emerging trends and business models in a CE to sketch next steps towards the transition in a selection of central sectors. Conclusions are drawn on the basis of the insights gained by the preceding chapters.
Against the background of the question which role tax based instruments have to play in policy mixes to counteract the unbroken growth trend of global resource use, this chapter initially describes how the insights from a country comparative study on national resource policy frameworks could be linked to instruments for the internalisation of external environmental costs on a European scale. On the basis of a project specific but substantiated resource use vision and potential governance principles for three transition processes to reach the goals, the tax concepts are subsequently connected to simulation scenarios in order to illustrate the resource impacts that could be achieved by those policy reforms. Conclusively, barriers to such fundamental changes of framework conditions are briefly reflected upon and some conclusions are drawn.