Refine
Year of Publication
Document Type
- Peer-Reviewed Article (635)
- Report (530)
- Part of a Book (355)
- Conference Object (351)
- Working Paper (230)
- Contribution to Periodical (189)
- Doctoral Thesis (35)
- Book (29)
- Master Thesis (10)
- Periodical Part (5)
Language
- English (2370) (remove)
Division
Urbanization and climate change are amongst the greatest challenges of the 21st century. In the "Low Carbon Future Cities" project (LCFC), three important problem dimensions are analysed: current and future GHG emissions and their mitigation (up to 2050); resource use and material flows; and vulnerability to climate change.
The industrial city of Wuxi has been the Chinese pilot city of the project. To establish the pathway for a low carbon future, it is crucial to understand the current situation and possible future developments. The paper presents the key results of the status quo analysis and the future scenario analysis carried out for Wuxi. Two scenarios are outlined. The Current Policy Scenario (CPS) shows the current most likely development in the area of energy demand and GHG emissions until 2050. Whereas the extra low carbon scenario (ELCS) assumes a significantly more ambitious implementation, it combines a market introduction of best available technologies with substantial behavioural change. All scenarios are composed of sub-scenarios for the selected key sectors.
Looking at the per capita emissions in Wuxi, the current levels are already high at around 12 tonnes CO2 per capita compared to Western European cities. Although Wuxi has developed a low carbon plan, the projected results under current policies (CPS) show that the total emissions would increase to 23.6 tonnes CO2 per capita by 2050. If the ELCS pathway was to be adopted, these CO2 emission levels could be reduced to 6.4 tonnes per capita by 2050.
Our perception of design is changing, for design today is no longer concerned only with aesthetics. Now the key factors are interdisciplinary competence and approaches to problem solving. Both politicians as well as businesses recognise design's hybridity and increasingly implement it as a driver of sustainable development (see Chap. 2: Design as a Key Management Factor for Sustainability).
But what exactly does "sustainability" mean? What does it mean in this specific context? People must make use of natural resources to meet their basic needs. In this process, resources are transferred into commercial circulation and usually transformed into products with a particular function. Yet the environment is limited and humanity uses more resources than the Earth can sustainably provide. It is time to rethink and generate the same usage while consuming fewer resources (see Chap. 3: Environmental Space - Challenging Transitions).
Most countries have incorporated sustainability strategies into their political agendas in order to counteract the threats of climate change caused by the overuse of natural resources, high CO2 emissions, and other factors. The indicators for these strategies vary greatly from country to country (see Chap. 4: Sustainability - Challenges, Politics, Indicators).
These indicators need to be taken into account if we are to successfully implement a product or service within a specific context. A concept can only be successful when country-specific indicators are taken into account and the societal context is incorporated into the plan right from the start. The goal is to develop services that support national sustainability targets in production and consumption systems (see Chap. 5: Managing Sustainable Development).
When it comes to companies, these changes can simply be introduced in the form of services or products. In the end, it is the users who decide on the success or failure of innovative solutions by either integrating them into their daily lives or ignoring them. Solutions will only be integrated into users' lives when their role within the social framework remains unchallenged by behavioural transformations caused by use of the solution. In order for users to be able to adopt innovations, sustainable development must take place simultaneously on many different levels. These multi-levelled transitions allow for the transformation of society as a whole. Designers can act as agents of change by providing the needed innovations (see Chap. 6: Transition Requires Change Agents for Sustainability).
If we are to develop suitable solutions and new approaches, the real needs have to be analysed at the beginning of the development process. New physical products, which frequently result in auxiliary products, are often developed without taking into account the overall context, whereas the development of service-orientated solutions is ignored. A physical product is not absolutely necessary. A service (which is naturally dependent on physical products) can usually fulfil the need just as well - or perhaps even better and at a lower cost – while using fewer or no resources (see Chap. 7: Needs & Services - An Approach). There are a variety of possible approaches to integrate sustainability into the design process (see Chap. 8: Design Process).
Precisely which solution is "most or more sustainable" (this is dependent on the defined targets and the indicators used) is often not immediately obvious, and we must turn to a set of methods for a transparent and tangible assessment (see Chap. 9: Sustainability Assessment in Design - Overview and Integration of Methods).
On 8 November 2016, Donald Trump was elected to become the 45th President of the United States of America. In his campaign, he repeatedly expressed his intention to "cancel the Paris Agreement". How can the course set with the adoption of the Paris Agreement be continued independently of the developments in the US? The authors sketch possible consequences of the sea change of US climate policy for the international negotiation process and identify options for a "Trump-resilient" way forward.
A reduction in working hours is being considered to tackle issues associated with ecological sustainability, social equity and enhanced life satisfaction - a so-called triple dividend. With respect to an environmental dividend, the authors analyse the time use rebound effects of reducing working time. They explore how an increase in leisure time triggers a rearrangement of time and expenditure budgets, and thus the use of resources in private households. Does it hold true that time-intensive activities replace resource-intensive consumption when people have more discretionary time at their disposal? This study on environmental issues is complemented by introducing the parameters of voluntary social engagement and individual life satisfaction as potential co-benefits of rebound effects. In order to analyse the first dividend, a mixed methods approach is adopted, enabling two models of time use rebound effects to be applied. First, semi-standardised interviews reveal that environmentally ambiguous substitutions of activities occur following a reduction in working hours. Second, estimates for Germany from national surveys on time use and expenditure show composition effects of gains in leisure time and income loss. For the latter, we estimate the marginal propensity to consume and the marginal propensity to time use. The results show that time savings due to a reduction in working time trigger relevant rebound effects in terms of resource use. However, both the qualitative and quantitative findings put the rebound effects following a reduction in working time into perspective. Time use rebound effects lead to increased voluntary social engagement and greater life satisfaction, the second and third dividends.
Women and transport : study
(2006)
As many other countries, Germany misses to exploit most of its large potential for cost-effective energy efficiency improvements. An organisation collecting funds and allocating them to the most (cost-)effective programmes could be a solution.
Therefore, political parties and trade unions as well as environmental NGOs have called for the creation of such an Energy Efficiency Fund. A recent study by the Wuppertal Institute together with a number of partners, commissioned by the Hans Böckler Foundation, analysed the feasibility of such an institution.
It has been the objective of the project, completed in March 2005, to
identify the added value of an Energy Efficiency Fund,
develop concrete proposals for the institutional setting and the financing of an Energy Efficiency Fund in Germany,
prepare and assess the benefits and costs of a portfolio of innovative but realistic energy efficiency programmes and campaigns, which the Energy Efficiency Fund would implement,
identify the effects of the fundraising and the programmes on different industries, particularly on the suppliers of energy-efficient technologies and services, and on their growth and employment perspectives,
estimate the net employment effects of such an Energy Efficiency Fund and its activities.
This paper presents the results and assesses the usefulness of the project and the participatory elements for increasing the acceptance of such a policy instrument.
The European Horizon 2020-project COMBI ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe") aims at estimating the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in the year 2030. The project goal is to cover the most important technical potentials identified for the EU27 by 2030 and to come up with consistent estimates for the most relevant impacts: air pollution (and its effects on human health, eco-systems/crops, buildings), social welfare (including disposable income, comfort, health and productivity), biotic and abiotic resources, the energy system and energy security and the macro economy (employment, economic growth and the public budget). This paper describes the overall project research design, envisaged methodologies, the most critical methodological challenges with such an ex-ante evaluation and with aggregating the multiple impacts. The project collects data for a set of 30 energy efficiency improvement actions grouped by energy services covering all sectors and EU countries. Based on this, multiple impacts will be quantified with separate methodological approaches, following methods used in the respective literature and developing them where necessary. The paper outlines the approaches taken by COMBI: socio-economic modelling for air pollution and social welfare, resource modelling for biotic/abiotic and economically unused resources, General Equilibrium modelling for long-run macroeconomic effects and other models for short-run effects, and the LEAP model for energy system modelling. Finally, impacts will be aggregated, where possible in monetary terms. Specific challenges of this step include double-counting issues, metrics, within and cross-country/regional variability of effects and context-specificity.
Why speed matters
(1997)
Modelling studies which project pathways for the future of energy in India currently have several implicit assumptions with regards to the social, institutional, and political changes necessary for energy transitions. This paper focuses on the specific question of land use change required for realising ambitious clean energy targets. Demand for land is likely to be a critical question in India's energy future given the challenges with land acquisition in the country as a result of high population density and significant rights enjoyed by landowners. Yet, there is a lack of literature relevant to India which makes a quantitative assessment of the land use impacts of different types of low carbon technologies. I calculate and compare the land requirements in India of ground based solar photovoltaic (PV) power, nuclear power, and wind energy. All three types of technologies are expected to grow substantially as a share of India's electricity mix in the coming years. The analysis suggests that land demands of ground based solar PV are likely to be substantial compared to wind energy and nuclear power, and some policy suggestions are provided which may help mitigate that challenge.
Addressing food waste prevention is one target of the Sustainable Development Goals (SDGs) and a major task for the UN Environmental Programme and the European Commission. It is promising in terms of its environmental saving potential. However, it also leads to consumers being able to save money, which they then are likely to spend, thus again causing a negative environmental impact. This dimension of the so-called indirect rebound effect, which prevents the desired ecological benefits from being achieved, is investigated in this paper. By using a single-region environmentally extended input-output model from a production perspective, the indirect rebound effects from food waste prevention in Germany are analysed. Any political action needs to consider not only a differentiation in income class, but also alternative concepts such as the principles of sufficiency in order to achieve all ecological benefits and specifically the third target of SDG 12.
Despite Germany's Paris Agreement pledge and coal exit legislation, the political debate around carbon-intensive coal remains heated. Coal power and mining have played an important, yet changing role in the history of German politics. In this paper, we analyze the entire parliamentary debate on coal in the German parliament (Bundestag) from its inception in 1949 to 2019. For this purpose we extract the more than 870,000 parliamentary speeches from all protocols in the history of the Bundestag. We identify the 9167 speeches mentioning coal and apply dynamic topic modeling – an unsupervised machine learning technique that reveals the changing thematic structure of large document collections over time - to analyze changes in parliamentary debates on coal over the past 70 years. The trends in topics and their varying internal structure reflect how energy policy was discussed and legitimized over time: Initially, coal was framed as a driver of economic prosperity and guarantee of energy security. In recent years, the debate evolved towards energy transition, coal phase-out and renewable energy expansion. Germany’s smaller and younger parties, the Greens and the Left Party, debate coal more often in the context of the energy transition and climate protection than other parties. Our results reflect trends in other countries and other fields of energy policy. Methodologically, our study illustrates the potential of and need for computational methods to analyze vast corpora of text and to complement traditional social science methods.
In order to make our lifestyles sustainable, changing our consumption patterns is fundamental. Hence, we need to better understand who the "consumers" are and to consider them as an active actor to directly engage for ensuring effective policies. In order to support a resource-light society, production and consumption need to be considered through an integrated system view; within this, consumers play an important role as co-acting subjects. Almost every activity in private life involves a form of consumption aimed at satisfying the subject's needs and often regarded through an economic lens. Sustainable development is not about abolishing private consumption, but rather about making it environmentally, socially and individually sustainable in its design, organization and realization, also involving ideas of simplicity or renunciation. In this paper, we will assess the status quo of the German and European debates on Consumer Research Policies and discuss the idea to link sustainability research and consumer research - where a strategic relation is currently missing. Within that discussion, an evidence-based and obligatory consumer research strategy in Germany and Europe would represent a significant improvement. A system view perspective is necessary to take into consideration the impressive amount of diversity, and to elaborate realistic economic and consumer policies. Therefore, we propose nine steps for understanding the role of the consumer in implementing sustainable development from a scientific and political perspective. The limitations of this paper are thus a result of the very diverse and often unclear policies and agendas produced by governments. The implementation of the proposed innovative research agenda for a future-orientated and sustainability-based consumer research is not free from challenges. Still, the paper suggests the first steps towards this direction. After a critical discussion of the current EU and German consumer and sustainability policies, nine differentiated and substantial ways to integrate and ameliorate them are proposed.
Although smart energy technologies (SETs) can fulfill multiple tasks in increasingly decarbonized and digitalized energy systems, market diffusion is still limited. This study investigates which beliefs influence consumers' intention to adopt two smart-energy offerings, whether the rapid growth of the smart home market will now drive SET adoption, and if consumer-driven diffusion will lead to sustainability potentials being realized. Building on UTAUT2, a new theoretical model is proposed, and a consumer acceptance survey was conducted in Germany (n = 700). Results indicate that a growing smart home market will not increase SET adoption and that "adjustable green defaults" should be introduced.
Article 6 of the Paris Agreement establishes three approaches for countries to cooperate with each other in implementing their climate protection contributions. However, Article 6 sketches out only some basic contours; the details are to be filled in by further negotiations. This article surveys the views countries have submitted so far in order to identify the main issues at stake, points of controvery and convergence and possible ways forward. The submissions reveal some sharp differences in opinions on key issues such as the scope of the new mechanisms, how to operationalise the Article 6 requirement to increase ambition, whether to have international provisions on the promotion of sustainable development, and how to protect environmental integrity in the use of Article 6. The article concludes with a number of recommendations on how to address these controversies.
What role do transaction costs play in energy efficiency improvements and how can they be reduced?
(2019)
Ex-ante policy evaluation requires a detailed understanding of how the subjects addressed by the policy react to its implementation. In the context of energy efficiency, policy measures typically aim at influencing investment decisions towards more efficient options.
As has been discussed widely in the context of the "energy efficiency gap", investments in energy efficiency improvements are frequently not conducted even though they seem cost-effective from a simple cost-benefit perspective, where transaction costs have been identified as one important barrier.
While transaction costs have been discussed widely from a conceptional perspective, empirical studies quantifying transaction costs and measures to reduce them are rare. This paper presents approaches, results and insights from a recently completed research project funded by the German Federal Energy Efficiency Center (BfEE), addressing transaction costs in various energy efficiency measures and the role of energy efficiency services to overcome the barrier.
We analyse a set of 11 energy efficiency investments covering private households, public institutions and the industry sector. We gather data on direct investment costs and energy cost savings and provide a detailed analysis of the various barriers and transaction costs associated with the implementation. We then analyse the costs of existing energy efficiency services using data provided by the BfEE. We compare the different cost elements and analyze the potential of energy efficiency services to reduce transaction costs.
We find that the role of transaction costs differs substantially between households, public institutions and companies and that the impact of energy efficiency services on transaction costs needs to be evaluated using different methodological approaches. We conclude that while data availability on disaggregated transaction costs is a major challenge, energy services can reduce transaction costs considerably.
To contribute to a better understanding of consumer food leftovers and to facilitate their reduction in out-of-home settings, our study analyzes the effects of two common intervention strategies for reducing leftovers in a holistic behavioral model. Based on a quasi-experimental baseline-intervention design, we analyzed how the display of information posters and the reduction of portion sizes take an effect on personal, social and environmental determinants in a structural equation model. Applying data from online surveys and observations among 880 guests (503 baseline, 377 intervention) during two weeks in a university canteen, the suggested model allows to assign effects from the two interventions on plate leftovers to specific changes in behavioral determinants. Portion size reductions for target dishes are found to relate to lower levels of plate waste based on conscious perception, represented in smaller portion size ratings. Effects from seeing information posters are found to base on changed personal attitudes, subjective norms and perceived behavioral control. However, depending on how an individual reacts to the information (by only making an effort to finish all food or by making an effort and additionally choosing a different dish in the canteen) there are opposite effects on these determinants and consequently also on plate leftovers. Overall, the differentiated results on intervention effects strongly support the benefits of more holistic and in-depth analyses of interventions to reduce plate leftovers and therefore to contribute to more sustainable food consumption in out-of-home settings.
Many hope that the Global Stocktake under the Paris Agreement can become a catalyst for increased mitigation ambition over time. Based on different theories of change, this paper outlines four governance functions for the Global Stocktake. It can contribute to the Paris Agreement as a pacemaker (stimulating and synchronizing policy processes across governance levels), by ensuring accountability of Parties, by enhancing ambition through benchmarks for action and transformative learning, and by reiterating and refining the guidance and signal provided from the Paris Agreement. The paper further outlines process- and information-related preconditions that would enable an ideal Global Stocktake.
What makes a good policy? : Guidance for assessing and implementing energy efficiency policies
(2013)
Which factors are crucial to successfully design and implement a "good practice" policy to increase the energy efficiency of buildings and appliances? This is one of the main challenges for the new web platform bigee.net that provides guidance on good practice policies.
In this paper we examine the question what "good practice" is by presenting a multi-criteria assessment scheme to analyse different policies worldwide.
The assessment scheme contains a set of criteria addressing key factors leading to the success of a policy as well as its outcomes: a good policy addresses all market players and barriers, avoids lost opportunities and lock-in effects, has ambitious and regularly updated energy efficiency levels, and spill-over effects. Other criteria are high energy savings and the calculated cost-effectiveness.
The assessment scheme provides a standardised data collection approach, which paves the way for both qualitative and quantitative evaluation. Furthermore, it can help policy-makers to transfer a successful policy.
The development of the scheme is based on a literature review of worldwide implemented policies and measures that promote energy-efficiency of buildings and appliances. Criteria were operationalized, including a ranking between 0 and 10. The ranking is a decisive factor whether the policy qualifies as good practice. To demonstrate the practicability of this scheme, the paper analyses a good practice example according to the assessment scheme: Energy-Efficient Refurbishment and Energy Efficient Construction programmes of the German public bank KfW.
What leads to lunch : how social practices impact (non-)sustainable food consumption / eating habits
(2017)
The field of nutrition will face numerous challenges in coming decades; these arise from global consumption patterns and lead to a high use of resources. Actors in the catering sector face difficulties in promoting their solutions for a more sustainable situation in their field, one of them being the lack of acceptance from consumers. We must ask the question of how to influence consumer behavior and bring forth a transition towards more sustainable food consumption. This paper presents results of a qualitative assessment of eating practices. A group of ten consumers participated in problem-centered interviews and provided data on their eating-out behavior over the course of two weeks. Using the theoretical approach of practice theory, the data gathered in this study were used to form an understanding of the practice of eating out with a focus on the daily routines that influence consumer choices. The results indicate that the practice of eating out is highly dependent on external factors. Busy lifestyles, mobility routines and a perceived lack of time prompt the decision to eat out. Consumers consciously do so to save time and effort and to streamline their schedules. Mobility seems to be an important driver for eating out. Participants try to limit the ways they undertake eating out yet often stop for a meal in-between appointments spontaneously. Findings suggest that nutrition knowledge and sustainable mindsets have little influence on the eating decisions away from home: Participants show a high level of distrust towards quality claims and put their health concerns aside eating out. We can conclude that the act of eating out is strongly influenced by daily routines and those practices that precede or succeed it. Changes in work and mobility patterns are very likely to have an impact on the way consumers eat away from home.
Renewable energy targets in the European Union (EU) have raised the demand for timber and are expected to increase dependence on imports. However, EU timber consumption levels are already disproportionally high compared to the rest of the world. The question is, how much timber is available for the EU to sustainably harvest and import, in particular considering sustainable forest management practices, a safe operating space for land-system change, and the global distribution of "common good" resources. This article approaches this question from a supply angle to develop a reference value range for the current as well as future sustainable supply of timber at the EU-27 and global levels. For current supply estimates, national-level data on forest area available for wood supply, productivity in that area, as well as the rate available for harvest were collected and aggregated into three potential supply scenarios. For future supply estimates, a safe operating space scenario halting land use change, a sensitivity analysis, and a literature review were performed. To provide both a comparison of global versus EU sustainable supply capacities and to develop a benchmark toward evaluating and comparing levels of consumption to sustainable supply capacities, per capita calculations were made. Results revealed that the per capita sustainable supply potential of EU forests is estimated to be around three times higher than the global average in 2050. Whether a global or EU reference value is more appropriate for EU policy orientation, considering both strengthened economic and cultural ties to the forest in forest-rich countries as well as the need to prevent problem shifting associated with exporting land demands abroad, is discussed. Further research is needed to strengthen and harmonize data, improve methods for modeling future scenarios and incorporate interdisciplinary and multi-stakeholder perspectives toward the development of robust and politically relevant reference values for sustainable consumption levels.
What is "natural capital"?
(1995)
The 2015 Paris Agreement relies on Nationally Determined Contributions (NDCs) to outline each country's policies and plans for reducing greenhouse gas (GHG) emissions. To strengthen global climate action and achieve the Agreement's temperature goal, it is crucial to enhance the ambition level of NDCs every 5 years. While previous studies have explored the ambition of initial NDCs, limited research has delved into the factors driving the enhancement or lack thereof in NDCs' emission reduction plans. This study employs a mixed-method design to investigate the determinants of NDC enhancement. First, we analyse the updated or revised NDCs of 111 countries using quantitative methods. Second, we conduct qualitative case studies focusing on Brazil and South Africa. Our findings reveal that countries that engaged in stakeholder consultations with civil society, business, and labour groups prior to developing their updated or revised NDCs were more likely to enhance their greenhouse gas reduction targets. These results are further supported by the case studies. South Africa conducted comprehensive consultations and submitted an enhanced GHG target, while Brazil, which did not arrange open consultations, did not improve its target. This study underscores the significance of comprehensive and transparent stakeholder engagement processes, highlighting their potential to drive enhanced NDCs. By involving diverse stakeholders, including civil society, business, and labour groups, countries can foster greater ambition and effectiveness in their climate action, ultimately contributing to the global effort to combat climate change.
The circle is a ubiquitous metaphor in the current scientific and political debate on possible strategies for coping with the changes brought by the so-called "Anthropocene". Terms such as "recycling", "upcycling", "downcycling", "life cycle" or "circular economy" all refer to the same geometric shape, which in turn can be found in numerous diagrams illustrating the respective design approaches and political strategies. But how does the circle shape the way we think and act as designers? Is it an appropriate metaphor to guide us to feasible actions, or is its degree of simplification too far removed from reality? In this article we look at the circular economy as a designed model, and question the circle as a communication tool for the cultural project of sustainability. As the circle may carry the risk of an oversimplified, unattainable, even disillusioning ideal, we discuss various alternative images and forms for their potential to become metaphors of alternative models. The hole, the plate, the pasture, the wheel, the mill wheel, the hamster wheel, the vortex, the double helix, the spider web and the rhizome - as metaphors, they each open up different perspectives and approaches to reality, they each construct different relationships and dependencies between nature and culture. The aim of this article is less about postulating the end of the circle as a metaphor in the sustainability debate, as it is about to fathom the circle's ends as a metaphorical tool. In other words, when does the metaphor of the circle become too abstract? As designers we can say that falling in love with a form right at the beginning of a design process can be rather limiting, as hardly any alternatives will be considered, and all further decisions are subordinated to achieving the desired shape. Therefore, we would like to emphasise the contingency of the circular economy as a model. We would like to welcome the thought that the circle has an "end".
How do recent changes in consumption in the wake of the COVID-19 pandemic affect the avoidance of packaging waste? How can an increase in packaging waste be countered and the previous trend towards unpackaged and reusable solutions be revived and promoted?
To tackle these questions, we use a systemic approach that regards packaging as a network of interrelated interests of industry (manufacturing and logistics), trade (retail and catering), consumers and the waste management sector. To analyse this network, we applied three methods. First, we analysed secondary sources such as surveys. Second, we conducted semi-structured interviews with seven actors from industry, consumer education and waste management in May and June 2020. Third, we used the questions from the interview guideline to do an online survey among representatives of the public waste management industry.
Water and energy are two pivotal areas for future sustainable development, with complex linkages existing between the two sectors. These linkages require special attention in the context of the energy transition. Against this background, this paper analyses the role of water availability in the development of solar thermal and photovoltaic power plants for the case of the Draa Valley in southern Morocco. Located in a semi-arid to arid mountainous area, the Drâa Valley faces high water stress - a situation expected to worsen due to climate change. At the same time, the region has one of the greatest potentials for solar energy in the world. To examine whether limited water availability could accelerate or delay the implementation of solar thermal and photovoltaic power plants, this paper compares regional water availability and demand in the Draa Valley for different scenarios, paying particular attention to potential socio-economic development pathways. The Water Evaluation and Planning System software is applied to allocate the water resources in the study region. The water supply is modelled under the Representative Concentration Pathway 8.5 climate scenario, while the water demand for the Drâa Valley is modelled for a combination of three socio-economic and two energy scenarios. The climate scenario describes a significant decrease in water availability by 2050, while the socio-economic and energy scenarios show an increase in water demand. The results demonstrate that during a sequence of dry years the reservoirs water availability is reduced and shortages in water supply can result in high levels of unmet demand. If this situation occurs, oasis farming, water for drinking and energy production could compete directly with each other for water resources. The energy scenarios indicate that the use of dry cooling technologies in concentrated solar power and photovoltaic hybrid systems could be one option for reducing competition for the scarce water resources in the region. However, given that energy generation accounts for only a small share of the regional water demand, the results also suggest that socio-economic demand reduction, especially in the agricultural sector, for example by reducing the cultivated area, will most likely become necessary.
In this brochure, WISIONS focuses on the interdependent connection between water and energy. WISIONS presents good practice projects dealing with water and energy in Guatemala, Peru, Tunisia, the Philippines and Tanzania that have been successfully implemented, with the intention of further promoting the particular approaches used by these projects. Using a key number of internationally accepted criteria, the main consideration for the selection of the projects was energy and resource efficiency. The assessment of the projects also included the consideration of regional factors acknowledging different needs and potentials.
Electricity generation requires water. With the global demand for electricity expected to increase significantly in the coming decades, the water demand in the power sector is also expected to rise. However, due to the ongoing global energy transition, the future structure of the power supply - and hence future water demand for power generation - is subject to high levels of uncertainty, because the volume of water required for electricity generation varies significantly depending on both the generation technology and the cooling system. This study shows the implications of ambitious decarbonization strategies for the direct water demand for electricity generation. To this end, water demand scenarios for the electricity sector are developed based on selected global energy scenario studies to systematically analyze the impact up to 2040. The results show that different decarbonization strategies for the electricity sector can lead to a huge variation in water needs. Reducing greenhouse gas emissions (GHG) does not necessarily lead to a reduction in water demand. These findings emphasize the need to take into account not only GHG emission reductions, but also such aspects as water requirements of future energy systems, both at the regional and global levels, in order to achieve a sustainable energy transition.
In this second brochure, WISIONS aims to focus on the significance of a combined approach to water and energy and to present a number of projects from around the globe that have been successfully implemented, with the intention of further promoting the particular approaches used by these projects. Using a key number of internationally accepted criteria, the main consideration for selection of the projects was energy and resource efficiency, but social aspects such as the inclusion of local population were also of relevance. The assessment of the projects also included the consideration of regional factors acknowledging different needs and potentials.
Wasting food, wasting resources : potential environmental savings through food waste reductions
(2018)
Food is needed to maintain our physical integrity and therefore meets a most basic human need. The food sector got in the focus of environmental policy, because of its environmental implications and its inefficiency in terms of the amount of food lost along the value chain. The European Commission (EC) flagged the food waste issue a few years ago and adopted since then a series of policies that partially address the problem. Among these, the Resource Efficiency Roadmap set the aspirational goal of reducing the resource inputs in the food chain by 20% and halving the disposal of edible food waste by 2020. Focusing on consumer food waste, we tested what a reduction following the Roadmap's food waste target would imply for four environmental categories in EU28 (European Union 28 Member States): greenhouse gas emissions, land use, blue water consumption, and material use. Compared to the 2011 levels, reaching the target would lead to 2% to 7% reductions of the total footprint depending on the environmental category. This equals a 10% to 11% decrease in inputs in the food value chain (i.e., around half of the resource use reductions targeted). The vast majority of potential gains are related to households, rather than the food-related services. Most likely, the 2020 target will not be met, since there is insufficient action both at Member State and European levels. The Sustainable Development Goals provide a new milestone for reducing edible food waste, but Europe needs to rise up to the challenge of decreasing its per capita food waste generation by 50% by 2030.
Managing solid waste is one of the biggest challenges in urban areas around the world. Technologically advanced economies generate vast amounts of organic waste materials, many of which are disposed to landfills. In the future, efficient use of carbon containing waste and all other waste materials has to be increased to reduce the need for virgin raw materials acquisition, including biomass, and reduce carbon being emitted to the atmosphere therefore mitigating climate change. At end-of-life, carbon-containing waste should not only be treated for energy recovery (e.g. via incineration) but technologies should be applied to recycle the carbon for use as material feedstocks. Thermochemical and biochemical conversion technologies offer the option to utilize organic waste for the production of chemical feedstock and subsequent polymers. The routes towards synthetic materials allow a more closed cycle of materials and can help to reduce dependence on either fossil or biobased raw materials. This chapter summarizes carbon-recycling routes available and investigates how in the long-term they could be applied to enhance waste management in both industrial countries as well as developing and emerging economies. We conclude with a case study looking at the system-wide global warming potential (GWP) and cumulative energy demand (CED) of producing high-density polyethylene (HDPE) from organic waste feedstock via gasification followed by Fischer–Tropsch synthesis (FTS). Results of the analysis indicate that the use of organic waste feedstock is beneficial if greenhouse gas (GHG) emissions associated with landfill diversion are considered.
A future-oriented and sustainable "Leasing Society" is based on a combination of new and innovative serviceoriented business models, changed product and material ownership structures, increased and improved eco-design efforts, and reverse logistic structures. Together these elements have the potential to change the relationship between producers and consumers, and thereby create a new incentive structure in the economy regarding the use and re-use of resources. While the consumer in a leasing society buys a service (instead of a product), the producer in a leasing society retains the ownership of the product (instead of selling it) and sells the service of using the product. This creates producer incentives to re-use, remanufacture, and recycle products and materials and could become a cornerstone of the circular economy, depending on how the leasing society is implemented. While a predominantly positive picture of the success of a leasing society model and related business cases emerges from the bigger part of the available literature, this paper argues that the resource efficiency of respective business cases is highly dependent on the specific business case design. This paper develops a more cautious and differentiated definition of the leasing society by discussing relevant mechanisms and success factors of leasing society business cases. The leasing society is discussed from a micro business-oriented and a macro environment-oriented perspective complemented by a discussion of conditions for successful business models that reduce environmental impacts and resource footprints.
This report analyses the international climate negotiations at the UN climate conference in Warsaw in November 2013. The report covers the discussions under the Durban Platform on developing a new comprehensive climate agreement by 2015 and increasing short-term ambition as well as the issues relating to near-term implementation of previous decisions in the areas of emission reductions and transparency, adaptation, loss and damage, finance and technology. The report concludes that Warsaw once again starkly highlighted the sharp divisions and lack of trust among countries. Industrialised countries' collective lack of leadership strongly contributed to re-opening the traditional North-South divide. As a result, on many issues the outcomes hardly go beyond the lowest common denominator. The conference only agreed on the bare minimum to move the 2015 process forward and also made no headway in strengthening short-term ambition. Some progress was made with the establishment of the "Warsaw international mechanism for loss and damage associated with climate change impacts" and the completion of the rules for reducing emissions from deforestation and forest degradation. However, here as well further substance, in particular financial support from industrialised countries, is required to actually fill these mechanisms with meaning. If countries want to escape from groundhog day, they will have to start seeing and utilizing the UN climate process rather differently.
The paper summarises the findings and the work carried out within the Voluntary Agreements - Implementation and Efficiency project and examines five agreement schemes in the field of industrial energy efficiency in the Netherlands, Denmark, Germany, France and Sweden. It provides a brief characterisation of the different approaches and discusses the related implementation effort and transaction costs. An assessment of performance and environmental effectiveness is given, followed by a discussion of the transferability of voluntary agreements among countries and to the European level.
Vision development towards a sustainable North Rhine-Westphalia 2030 in a science-practice-dialogue
(2017)
The paper presents the results of a participatory vision development process in the Federal State of North Rhine-Westphalia (NRW) in Germany. The vision development was part of a scientific research project that accompanied the development of a sustainability strategy for NRW at state level. The Sustainability Strategy NRW was adopted in July 2016 and contains parts of the vision developed in the research project: Sentences from the narrative text vision and proposed targets and indicators that back-up the vision for a sustainable NRW in 2030 were used by the state of NRW. The vision was developed in iterative steps in three consecutive dialogue rounds with different stakeholders from science and practice. The paper presents the methodological approach and the results of the vision formulation process. The paper discusses the lessons learned from the vision development - from both practical and theoretical perspectives of transition management. The paper explores the relevance of setting ambitious targets for sustainable development as part of a state strategy by taking the proposed target of a "4 × 25% modal split" by 2030 as an example. The project demonstrated that a participatory approach for vision development is time and resource consuming, but worth the effort as it improves the quality and acceptance of a vision. Furthermore, the project demonstrated that transformative science contributes valuable inputs for sustainability transitions and for facilitating participatory vision development.
This report focuses on the contribution of ICT to improvements in resource efficiency and transport intensity at the macro, meso and micro levels. It presents the research on environmental effects of e-business and e-work.
The research strand explored the implication of ICT and its applications from the micro- (case study), meso- (different e-business types) and macro-level (macro-economic and policy level).
The "macro-analysis-module" aimed at quantifying the potential contribution of e-business and ICT to dematerialisation and resource productivity. The analysis followed a top-down approach complementary to the case study based microanalyses. It compromised the analysis of energy-use and selected material flows (CO(2)) of three EU Member States to determine whether there is any macro-level evidence of dematerialization and increased resource productivity resulting from e-business and ICT.
From a micro and meso level perspective, the research object has been the provision of new IT based applications instead of "traditional" products, services and customs (e-commerce and telework). The research quantified the resource- and transport efficiency of e-business in different case studies and identified key factors determining the impact on resource- and transport efficiency.
Since the middle of the 20th century, human society experiences a "Great Acceleration" manifesting in historically remarkable growth rates that create severe sustainability problems. The globally exploding potentials of information and knowledge exchange have been and are vital drivers for this acceleration. Society has now come to the point that it requires a "Great Transformation" towards sustainability to ensure the viability of the planet for a vital society. The energy transition plays a central role for this transformation. In this context, human society has developed a comparably good understanding of the necessary infrastructural changes of this transition. For transforming the patterns of energy production and use in an energy transition as part of the "Great Transformation", this process of change now needs to strengthen its focus on information, communication, and knowledge systems. Human society needs to establish a knowledge system that has the potential to create usable knowledge for sustainability solutions. This requires organizing a communication system that is sufficiently complex, interconnected, and, at the same time, efficient for integrating reflexive, open-ended, inter- and transdisciplinary learning, evaluation, and knowledge co-production processes across multiple levels. This challenge opens a wide field of research.
This cumulative dissertation contributes to research in this direction by applying a systemic sustainability perspective on the content and organization of communication in the field of research on sustainable energy and the operational level of municipal climate action as part of the energy transition. Regarding sustainability, this thesis uses strong sustainability and its principles as a frame for evaluating the content of communication. Regarding the systemic perspective, the thesis particularly relies on the following theories: (i) the human-environment system model by R. Scholz as an overarching framework regarding interactions between humans and nature, (ii) social systems theory by N. Luhmann to reflect the complexity of society, (iii) knowledge management to consider the human character of knowledge and a practice-oriented perspective, and (iv) management cybernetics, in particular, the Viable System Model by S. Beer as a framework to analyze and assess organizational structures. Furthermore, the thesis leverages the potential of text mining as a method to identify and visualize patterns in texts that reflect prevalent paradigms in communication.
The thesis applies the above conceptual and methodological basis in three case studies. Case Study 1 investigates the measures proposed in 16 municipal climate action plans of regional centers in Lower Saxony, Germany. It uses a text mining approach in the form of an Summary interpretation network analysis. It analyzes how different societal subsystems are connected at the semantic level and to what extent sustainability principles can be recognized. Case Study 2 analyzes and reflects paradigms and discursive network structures in international scientific publications on sustainable energy. The study investigates 26533 abstracts published from 1990 to 2016 using a text mining approach, in particular topic modeling via latent Dirichlet allocation. Case Study 3 turns again to the cases of municipal climate action in Lower Saxony examined in Case Study 1. It examines the involvement of climate action managers of these cities in multilevel knowledge processes. Using design principles for knowledge systems, it evaluates to what extent knowledge is managed in this field across levels for supporting the energy transition and to what extent local innovation potential is leveraged or supported.
The three case studies show that international research on sustainable energy and municipal climate action in Germany provide promising contributions to achieve a transformation towards sustainability but do not fully reflect the complexity of society and still support a growth paradigm, in contrast to a holistic sustainability paradigm. Further, the case studies show that research and local action are actively engaging with the diversity of energy technologies but are lagging in dealing with the socio-epistemic (communication) system, especially with regard to achieving cohesion. Using the example of German municipalities, Case Studies 1 and 3 highlight the challenges of achieving coherent local action for sustainability and bottom-up organizational learning due to incomplete or uncoordinated multilevel knowledge exchange. At the same time, the studies also point out opportunities for supporting the required coherent multilevel learning processes based on local knowledge. This can be achieved, for instance, by strengthening the coordinating role of intermediary organizational units or establishing closer interactions between the local operational units and the national level.
The thesis interprets and synthesizes the results of the three case studies from its systemic sustainability perspective. On this basis, it provides several generalized recommendations that should be followed for establishing viable communication systems, especially but not exclusively in policy-making:
Systemic holism: Consider matter, energy, and information flows as an integrated triplet in the context of scales, structures, and time in the various subsystems. Knowledge society: Focus on the socio-epistemic (communication) system, e.g., using the perspective of knowledge systems and associated design principles considering, for instance, working environments across horizontal and vertical levels, knowledge forms and types, and knowledge processes. Sufficiency communication: Emphasize sufficiency approaches, make it attractive, and find differentiated ways for communicating them. Multilevel cohesion and innovation: Achieve cohesion between the local and higher levels and leverage local innovations while avoiding isolated local action. Organizational interface design: Define the role of organizational units by the interactions they create at the interfaces with and between societal subsystems. Local transdisciplinarity: Support local transdisciplinary approaches integrating various subsystems, especially industry, while coordinating these approaches from a higher level for leveraging local innovation. Digital public system: Exploit existing digital technologies or infrastructures in the public system and recognize the value of data in the public sphere for achieving cohesion. Beyond the above recommendations, this thesis suggests that potential for further research lies in: Advancing nature-inspired systemic frameworks. Understanding the structure and creation of human knowledge. Developing text mining methodologies towards solution-oriented approaches.
The ultimate goal of German Resource Efficiency Programme (ProgRess) is to make the extraction and use of natural resources more sustainable and reduce associated environmental pollution as much as possible. By doing this - also with responsibility towards future generations - the programme should create a prerequisite for securing a long-term high quality of life. To bring the policy approaches formulated in ProgRess to reality, efforts to implement resource efficiency measures have to be increased at all levels - from international to regional to local.
The chapter intends to provide an impetus for the current debate on ProgRess policy development. The chapter identifies, analyses and describes deficits and possibilities of vertical integration of the German programme in particular and derives recommendations for action which may also serve as indications for other strategies. The following sections are based on results of the advisory report "Vertical integration of the national resource efficiency programme ProgRess (VertRess)", conducted by the German Institute of Urban Affairs (Difu) and the Wuppertal Institute for Climate, Environment and Energy on behalf of the German Environmental Agency (UBA) and the Federal Ministry of the Environment, Nature Conservation and Nuclear Safety (BMU).
An increasing number of publications about theoretical approaches and new findings illustrate the relevance of the topic environmental risk assessment. The actual discussion about high oil prices is not incorporated under this headline; but it should be, as natural resource scarcity is a crucial economic factor. In practical experience, more and more banks, insurance companies as well as investors realize that there are certain areas with a high correlation between sustainable development and corporate success, corporate risk exposure and corporate performance. In this discussion one of the most obvious topics are risks related to climate change. According to the findings of surveys evaluated in this paper climate change starts to affect economic development and companies' performance in various ways. Over the next decade, economic losses due to climate change are estimated by US$ 150 billion per year. As result world's business leaders have described climate change as the biggest challenge of the 21st century. Hence, the incorporation of climate change as a risk factor is essential, but risks related to climate change feature a severe issue of complex structure and uncertainty; traditional risk assessment tools appear in the light of not being able to either reflect the multifaceted system nor provide sufficient outcomes. Environmental risk assessments in general so far have mainly emphasized - if at all - on actual and possible impacts of the release of materials or emissions (external effects). But an overall sustainable risk assessment has also to take into account the risks related to the inflow of materials. The main reason for neglecting the inflow risks from an environmental perspective can be seen in the fact that these risks seem to be less tangible and more uncertain. Nevertheless, in a world where economic development and the use of natural resources is not uncoupled yet, a steadily increasing economic power will result in a continually rising extraction of resources. As all resources are limited, the risk of scarcity will rise; and the example of water illustrates that it already exists. Indeed, scarcity is not tangible for all kind of resources from a present point of view. Hence, a specified analysis is needed considering different market and supply conditions. A comprehensive analysis of environmental risks needs to encompass risks affecting the output as well as the input side of a value chain. This paper enlarges the discussion on environmental risk assessments upon the input dimension using the example of carbon risks. Firstly, carbon risks are defined as risks related to climate change at the corporate level with a focus on the input as well as the output dimension. Secondly, an analysis of the current discussion on the topic of carbon risk evaluates the status quo of scientific work in this field. Thirdly, in terms of developing a practically oriented tool, the Value-at-Risk approach and it's application to measure input oriented carbon risks are scrutinized. The results discuss how future volatility and market prices can be utilized to describe the uncertainty resulting from markets acknowledging and pricing oil scarcity as a risk factor. Finally recommendations with a focus on strategic management decisions and financial performance analysis are given and further research opportunities are drawn. The conclusion is; once markets have acknowledged the depletion mid-point as a measure of oil scarcity, natural scarcity will result in a significant higher Value-at-Risk. The Value-at-Risk of one barrel of crude oil could then be as high as US$ 15.5 in the short term and even US$ 17.2 in the long term. The scope of this paper is neither intended to predict one likely development nor to demonstrate how this tool can actually work in terms of forecasting single companies' performance. But in order to point the way ahead, this paper provides scenarios for potential future developments and sets a frame for risk assessments due to oil scarcity.
For some time, 3D printing has been a major buzzword of innovation in industrial production. It was considered a game changer concerning the way industrial goods are produced. There were early expectations that it might reduce the material, energy and transport intensity of value chains. However for quite a while, the main real world applications of additive manufacturing (AM) have been some rapid prototyping and the home-based production of toys made from plastics. On this limited basis, any hypotheses regarding likely impacts on industrial energy efficiency appeared to be premature. Notwithstanding the stark contrast between early hype and practical use, the diffusion of AM has evolved to an extent that at least for some applications allows for a preliminary assessment of its likely implications for energy efficiency.
Unlike many cross-cutting energy efficiency technologies, energy use of AM may vary substantially depending on industry considered and material used for processing. Moreover, AM may have much greater repercussions on other stages of value chains than conventional cross-cutting energy efficiency technologies. In case of AM with metals the following potential determinants of energy efficiency come to mind:
- A reduction of material required per unit of product and used during processing;
- Changes in the total number and spatial allocation of certain stages of the value chain; and
- End-use energy efficiency of final products.
At the same time, these various streams of impact on energy efficiency may be important drivers for the diffusion of AM with metals. This contribution takes stock of AM with metals concerning applications and processes used as well as early evidence on impacts on energy efficiency and combine this into a systematic overview. It builds on relevant literature and a case study on Wire Arc Additive Manufacturing performed within the REINVENT project.
Using results-based finance for climate action : existing initiatives and the role of the CDM
(2014)
Results-based finance is receiving increasing attention, being considered as a potential key funding mode in climate finance. The Clean Development Mechanism has been cited to potentially contribute to this goal. Against this background, the policy brief outlines the rationale of the concept and analyses six climate change mitigation initiatives that build on the results-based finance approach. The analysis puts a special focus on the role of the CDM.
Nowadays, high expectations are set for a digitally enabled circular economy (CE), to enhance resource efficiency. Tracing, tracking, and storing information is most important for this. In this paper, the application of Internet of Things (IoT) and Distributed Ledger Technology (Blockchain) are hence discussed by presenting the case of professional Electrical and Electronic Equipment (EEE) in Italy. Within the context of CE, prevention of electronic waste (WEEE) is extremely relevant as it is a fast-growing waste stream, and the products contain environmentally damaging substances as well as valuable and rare materials. The use of a proper combination of IoT and blockchain can help the producers to keep control on products until EEE end-of-life, while promoting CE strategies and supporting decision-making. Based on the outcomes of five interviews conducted in 2019 to companies of the EEE sector, potential improvements in the EEE end-of-use management are discussed. After providing the definition of requirements for both the technical solution and its testing are provided, three solution variations and the related business models are created and presented, as well as considerations on their environmental and economic impacts. The study shows how digital technologies can support the appropriate and circular management of EEE products and WEEE.
The German Energiewende is a deliberate transformation of an established industrial economy towards a nearly CO2-free energy system accompanied by a phase out of nuclear energy. Its governance requires knowledge on how to steer the transition from the existing status quo to the target situation (transformation knowledge). The energy system is, however, a complex socio-technical system whose dynamics are influenced by behavioural and institutional aspects, which are badly represented by the dominant techno-economic scenario studies. In this paper, we therefore investigate and identify characteristics of model studies that make agent-based modelling supportive for the generation of transformation knowledge for the Energiewende. This is done by reflecting on the experiences gained from four different applications of agent-based models. In particular, we analyse whether the studies have improved our understanding of policies' impacts on the energy system, whether the knowledge derived is useful for practitioners, how valid understanding derived by the studies is, and whether the insights can be used beyond the initial case-studies. We conclude that agent-based modelling has a high potential to generate transformation knowledge, but that the design of projects in which the models are developed and used is of major importance to reap this potential. Well-informed and goal-oriented stakeholder involvement and a strong collaboration between data collection and model development are crucial.
A continuing trend of global urbanization leads to a geographical concentration of population and social activities that causes a regional compression of concomitant resource and energy consumption. This paper argues that a Sustainable Living Lab infrastructure (SusLab) in urban areas facilitates a systematic integration of user's consideration in the design and development of Product-Service Systems (PSS) that enables changes of daily routines in favor of urban wealth development and conservation of ecosystem services. The authors build on the Sustainable Consumption and Production (SCP) Model of the Wuppertal Institute that provides a theoretical framework of sociotechnical rearrangements towards urban sustainability transition. Therefore, a reconfiguration of social practices and PSS in a desired direction according to social, ecological and economic concerns is reconsidered on the micro level in line with efficiency, consistency, and sufficiency strategies. The authors introduce an assessment framework for urban sustainable development and illustrate multifarious concepts of PSS that are aiming to decouple wealth development from resource and energy consumption in urban areas.
A key challenge of the 21st century is to transform society into one that features sustainable patterns of production and consumption. To achieve this, transition processes need to be designed in key areas such as housing, mobility and nutrition. The design and large-scale implementation of sustainable product service systems (PSS) is regarded a promising approach for sustainability transitions. Real-life socio-technical experiments are an important infrastructure for designing PSS in collaboration with stakeholders and users. In this paper, we argue that transdisciplinary and action research methods are required for institutionalising an experimental set-up and developing PSS within such infrastructures. We present the Sustainable LivingLabs (SLL) research infrastructure and its methodology as an example of such experimental settings. It was collaboratively developed with key stakeholders in three consecutive research projects and applied to e.g. heating and space heating. We show new qualities of SLL in relation to existing LivingLabs and approaches for PSS design and present its methodological three-phase model (insight research, prototyping, field testing) of research. Our article contributes to knowledge on a methodological framework and tool-kit for PSS development in SLL with a clear focus on socio-ecological sustainability. Intermediate findings confirm the high influence of user practices on heating energy consumption and show starting points for PSS development: e.g. transformational products, home-automation combined with consulting along value chains. We hypothesise that developing PSS in user- and stakeholder-integrated settings supports acceptance and diffusion and, by taking into account users' social practices of utilising novelties, reduces rebound effects caused by incorrect application.
Domestic sustainability innovations are considered to play a key role for pathways to sustainable consumption. The paper shows how open innovation processes can lead to such sustainable innovations, by means of an experimental and interactive infrastructure. It presents how – based on results of the LivingLab project conducted at the Wuppertal Institute within a European Consortium (Lead TU Delft) - currently an extended Sustainable LivingLab approach is developed and applied in two joint research projects at national and international level. To conceptualise this approach, we refer to recent proceedings in innovation and sustainability research, i.e. practice theory to analyse sustainable product design. Focusing on technical solutions and individual behaviour while assuming people's needs as fixed entities, disregards the dynamics of everyday practices in which technologies themselves create needs. Therefore, the consumer's position should be strengthened through userdriven innovation. LivingLabs are combined lab-/household systems, which put the user, i.e. the home occupant, and value chain related actors (producer, handicraft, etc.) on centre stage in the innovation process. We introduce its research agenda and the Three Phases Model of research. We hypothesise that at the end of this userintegrated innovation process developed products have a higher chance of successful diffusion. To illustrate this, we show how the LivingLab infrastructure is employed for the German InnovationCity Ruhr and how it can promote the development of user-centred sustainable consumption strategies.