Addressing food waste prevention is one target of the Sustainable Development Goals (SDGs) and a major task for the UN Environmental Programme and the European Commission. It is promising in terms of its environmental saving potential. However, it also leads to consumers being able to save money, which they then are likely to spend, thus again causing a negative environmental impact. This dimension of the so-called indirect rebound effect, which prevents the desired ecological benefits from being achieved, is investigated in this paper. By using a single-region environmentally extended input-output model from a production perspective, the indirect rebound effects from food waste prevention in Germany are analysed. Any political action needs to consider not only a differentiation in income class, but also alternative concepts such as the principles of sufficiency in order to achieve all ecological benefits and specifically the third target of SDG 12.
Renewable energy targets in the European Union (EU) have raised the demand for timber and are expected to increase dependence on imports. However, EU timber consumption levels are already disproportionally high compared to the rest of the world. The question is, how much timber is available for the EU to sustainably harvest and import, in particular considering sustainable forest management practices, a safe operating space for land-system change, and the global distribution of "common good" resources. This article approaches this question from a supply angle to develop a reference value range for the current as well as future sustainable supply of timber at the EU-27 and global levels. For current supply estimates, national-level data on forest area available for wood supply, productivity in that area, as well as the rate available for harvest were collected and aggregated into three potential supply scenarios. For future supply estimates, a safe operating space scenario halting land use change, a sensitivity analysis, and a literature review were performed. To provide both a comparison of global versus EU sustainable supply capacities and to develop a benchmark toward evaluating and comparing levels of consumption to sustainable supply capacities, per capita calculations were made. Results revealed that the per capita sustainable supply potential of EU forests is estimated to be around three times higher than the global average in 2050. Whether a global or EU reference value is more appropriate for EU policy orientation, considering both strengthened economic and cultural ties to the forest in forest-rich countries as well as the need to prevent problem shifting associated with exporting land demands abroad, is discussed. Further research is needed to strengthen and harmonize data, improve methods for modeling future scenarios and incorporate interdisciplinary and multi-stakeholder perspectives toward the development of robust and politically relevant reference values for sustainable consumption levels.
How do recent changes in consumption in the wake of the COVID-19 pandemic affect the avoidance of packaging waste? How can an increase in packaging waste be countered and the previous trend towards unpackaged and reusable solutions be revived and promoted?
To tackle these questions, we use a systemic approach that regards packaging as a network of interrelated interests of industry (manufacturing and logistics), trade (retail and catering), consumers and the waste management sector. To analyse this network, we applied three methods. First, we analysed secondary sources such as surveys. Second, we conducted semi-structured interviews with seven actors from industry, consumer education and waste management in May and June 2020. Third, we used the questions from the interview guideline to do an online survey among representatives of the public waste management industry.
Nowadays, high expectations are set for a digitally enabled circular economy (CE), to enhance resource efficiency. Tracing, tracking, and storing information is most important for this. In this paper, the application of Internet of Things (IoT) and Distributed Ledger Technology (Blockchain) are hence discussed by presenting the case of professional Electrical and Electronic Equipment (EEE) in Italy. Within the context of CE, prevention of electronic waste (WEEE) is extremely relevant as it is a fast-growing waste stream, and the products contain environmentally damaging substances as well as valuable and rare materials. The use of a proper combination of IoT and blockchain can help the producers to keep control on products until EEE end-of-life, while promoting CE strategies and supporting decision-making. Based on the outcomes of five interviews conducted in 2019 to companies of the EEE sector, potential improvements in the EEE end-of-use management are discussed. After providing the definition of requirements for both the technical solution and its testing are provided, three solution variations and the related business models are created and presented, as well as considerations on their environmental and economic impacts. The study shows how digital technologies can support the appropriate and circular management of EEE products and WEEE.
Unvermeidbare Emissionen aus der Abfallbehandlung : Optionen auf dem Weg zur Klimaneutralität
(2022)
Auch die thermische Abfallbehandlung in Deutschland kann zu einem Baustein des klimaneutralen Wirtschaftens werden. Allerdings sind dafür noch verschiedene Voraussetzungen zu schaffen. Technisch sind neben den bereits bekannten weitere innovative Verfahren in der Entwicklung; nicht zu vernachlässigen ist zudem die anspruchsvolle Aufgabe des CO2-Handlings. Hier ist zum einen der Aufbau der benötigten Infrastruktur zu nennen. In Bezug auf die Nutzung des abgetrennten CO2 ist auch die Industrie gefragt, um sektorübergreifende, klimafreundliche Use-Cases und Geschäftsmodelle rund um CCU und die weitmöglichste Schließung von Kohlenstoffkreisläufen zu entwickeln. Entsprechende Regularien und Marktanreize sind politisch zu setzen.
With the introduction of the Roadmap to a Resource Efficient Europe (2011) and the more recent commitment of The Action Plan towards the Circular Economy (2015), the European Commission (EC) has expressed its fundamental interest to substantially improve the resource efficiency of the European economy and enable the transition towards the Circular Economy (CE). This policy push has meanwhile been complemented by some quite ambitious national programmes for RE and CE and institutional advances but it is not yet bound to targets or mandatory reporting.
Against this background, the objective of this paper is to give a comprehensive overview of the current policy frameworks at EU and a selection of MSs and provide insights into the elements shaping policy processes. The analytical framework relies on three essential interconnected components: the policy framework, the economic incentive system and economic side policies which are relevant in the context of RE and CE and actor constellations. The paper does this looking at the interface between EU-MSs. The analysis is based on different empirical surveys in which the policy development is observed and discussed (EEA 2011, 2016a, 2016b, EIO 2013, 2014, 2016) and a comprehensive review of legislative and policy frameworks at the EU and selected MSs, undertaken as part of the project POLFREE (Policy option for a Resource-Efficient Economy) (Domenech et al., 2014, Bahn-Walkowiak et al., 2014). The analysis reveals that policy frameworks for RE/CE are complex and fragmented as competing goals and visions reduce effectiveness of measures. The paper makes recommendations as to how EU and MS policies could improve RE in a coordinated way, but recognizes that achieving such coordination will be challenging in the current political context.
The contribution of the EU bioeconomy to sustainable development depends on how it is implemented. A high innovation potential is accompanied by considerable risks, in particular regarding the exacerbation of global land use conflicts. This article argues that a systemic monitoring system capable of connecting human-environment interactions and multiple scales of analysis in a dynamic way is needed to ensure that the EU bioeconomy transition meets overarching goals, like the Sustainable Development Goals. The monitoring should be centered around a dashboard of key indicators and targets covering environmental, economic, and social aspects of the bioeconomy. With a focus on the land dimension, this article examines the strengths and weakness of different economic, environmental and integrated models and methods for monitoring and forecasting the development of the EU bioeconomy. The state of research on key indicators and targets, as well as research needs to integrate these aspects into existing modeling approaches, are assessed. The article concludes with key criteria for a systemic bioeconomy monitoring system.
Supply risks and environmental concerns drive the interest in critical raw material recycling in the European Union. Globally, waste electrical and electronic equipment (WEEE) is projected to increase by almost 40% until 2030. This waste stream can be a source of secondary raw materials. The determination of the economic feasibility of recycling and recovering specific materials is a data-intensive, time-consuming, and case-specific task. This study introduced a two-part evaluation scheme consisting of upper continental crust concentrations and raw material prices as a simple tool to indicate the potential and limitations of critical raw material recycling. It was applied to the case of light-emitting diodes (LED) lamps in the EU. A material flow analysis was conducted, and the projected waste amounts were analyzed using the new scheme. Indium, gallium, and the rare earth elements appeared in low concentrations and low absolute masses and showed only a small revenue potential. Precious metals represented the largest revenue share. Future research should confirm the validity and usefulness of the evaluation scheme.
The paper undertakes a closer look on the relation of institutions and policy mixes within the multi-level scope of the European Union in the policy field of resource efficiency and maps out different configurations. Based on an extensive analysis of scope, foci, instruments and especially the distribution of institutional responsibilities in 32 EU countries, the paper aims to amplify the categorisation of policy mix characteristics developed by Rogge and Reichardt by considerations on the institutional background of policy mixes. It specifically brings into question the potential impact of different institutional settings on the consistency and coherence of approaches in this evolving policy field. Resource efficiency is an eminently cross-cutting policy concept and a specific interesting unit of analysis due to the observable heterogeneity of implementation approaches. However, it is still mainly disconnected from energy issues and, at the same time, EU policy has shifted to the circular economy approach, indicating further need for streamlining with the resource efficiency approach. The paper stresses the need to include institutional and multi-level governance issues for policy design and the development of policy mixes, especially in the context of the now refocused resource efficiency agenda to the transition to a circular economy.
The need for a transition towards a circular economy (CE) is evident, as the current economic model is based on the exploitation of far more resources than the planet can replenish sustainably. A significant part of this economic transition is the inception of new, CE-oriented startups and business activities. While business model frameworks (BMF), such as the Business Model Canvas (BMC), were at the center of discussions about structuring business ideas in the beginning of the millennium, the conversation must now shift towards circular BMFs (CBMF). This paper follows the Design Research Methodology (DRM) for an empirical approach to devising a novel CBMF, including expert interviews as well as a first application of the framework with a startup. Throughout this process, a new and innovative tool called Circular Business Framework (CBF) was created and tested based on CE principles.
The Digital Product Passport (DPP) is a concept for collecting and sharing product-related information along the life cycle of a product. DPPs are currently the subject of intense discussion, and various development efforts are being undertaken. These are supported by regulatory activities, especially in the case of the battery passport. The aggregation of product life-cycle data and their respective use, as well as the sharing of these data between companies, entrepreneurs, and other actors in the value chain, is crucial for the creation of a resource-efficient circular economy. Despite the urgent need for such a solution, there is currently little attention given to the digital infrastructure for the creation and handling of the DPPs (i.e., the so-called DPP system). Moreover, there is so far no common understanding of what the requirements for a DPP system are. This is the background and underlying motivation of our paper: we identify the requirements for a DPP system in a structured way, i.e., based on stakeholder involvement and current literature from science and industry. In addition, we compose, categorize, and critically analyze the results, i.e., the list of requirements for DPP systems, in order to identify gaps. Summarized, our research provides insights into the criteria to be considered in the creation of an actual DPP system.
Each year, approximately one-third of the food produced for human consumption is lost or wasted worldwide. The waste of resources used for this food has significant environmental impacts in terms of land and water use as well as greenhouse gas emissions. Consequently, one of the targets of the UN sustainable development goals is to halve per capita global food waste at the retail and consumer levels and reduce food losses along production and supply chains by 2030. However, sufficient knowledge about the suitability of instruments for food waste prevention is still lacking. The purpose of this paper is therefore threefold: first, it outlines the generation and causes of food losses and waste. Second, it discusses good practices from different countries, such as laws to reduce food waste, voluntary agreements, awareness campaigns and results from behavioural economics. Finally, based on these findings, this paper identifies barriers to as well as requirements for the implementation of effective and efficient instruments.
Facing an ever-increasing global consumption of natural resources and related environmental as well as socioeconomic challenges, the transition towards a circular economy will be of crucial importance. The issue is high on the political agenda, especially since the European Commission published its Circular Economy Action Plan in December 2015. Apparently different stakeholders have very different perceptions of the concept as well as different expectations for its implementation. During a workshop series by the Friedrich Ebert Stiftung, experts from policy, science, administration, industry and unions discussed key issues for the circular economy: What's the status quo in Germany? How can the circular economy be implemented in a comprehensive and efficient way? Which instruments are available? Is the legal framework on EU and national level sufficient for the evolvement of a circular economy? What is the role of the consumer? What are the economic potentials especially with regard to job creation? How can research and innovation policy contribute to this process? This paper aims to summarise the different discussions.
Ob die Rückführung von industriellen und gewerblichen Sekundärkunststoffen, das heißt von Abfällen bzw. von bereits wiederaufbereiteten Kunststoffrezyklaten, gelingen kann, ist von mehreren Faktoren wie insbesondere den spezifischen Materialeigenschaften, den Mengen, in denen sie anfallen, den aktuellen Marktpreisen (auch gegenüber Neuware) und auch der räumlichen Nähe von Sortier- bzw. Wiederaufbereitungsinfrastruktur abhängig. Trotz eigentlich guter Voraussetzungen für ein werkstoffliches Recycling, gelangen einzelne in Unternehmen anfallende Abfallchargen häufig in eine thermische Verwertung, weil sich ein Recycling wirtschaftlich nicht lohnt. Grund hierfür ist unter anderem, dass der Informationsaustausch zu den oben genannten Faktoren für Unternehmen häufig noch sehr mangelhaft ist.
Aktuell in Entwicklung befindliche digitale Plattformen und Applikationen sowie zugehörige Geschäfts- und Betreibermodelle, welche Kunststoffverarbeiter untereinander sowie Wertstofferzeuger und -verwerter vernetzen sollen, können künftig höhere Recyclingquoten ermöglichen und ökologische Einsparpotenziale heben.
Der Artikel führt Entwicklungen und Ergebnisse aktueller Forschungsprojekte zu solchen Vernetzungen zusammen, zeigt die aktuelle Situation des werkstofflichen Recyclings von industriellen und gewerblichen Kunststoffabfällen auf und beleuchtet welche Voraussetzungen für eine erfolgreiche Kreislaufführung von industriellen Kunststoffen gegeben sein müssen. Es wird insbesondere analysiert, in welcher Weise digitale Technologien und die durch sie erzielbare Informationstransparenz eine verbesserte Kreislaufwirtschaft bewirken können und in welcher Weise dies Wertschöpfungsnetzwerke räumlich beeinflussen kann.
Treating waste as a resource and the design of a circular economy have been identified as key approaches for resource efficiency. Despite ambitious targets, policies and instruments that would enable a transition from a conventional waste management to an integrated and comprehensive resource management are still missing. Moreover, this will require innovative policy mixes which do not only address different end-of-pipe approaches but integrate various resource efficiency aspects from product design to patterns of production and consumption. Based on the results of a project funded by the Seventh Framework Programme for Research and Technological Development named "POLFREE - Policy Options for a resource efficient economy", this paper addresses several aspects of the conceptualization of policy mixes with regard to waste as a specific resource efficiency challenge. The guiding research interest of this paper is the combination of policies necessary to create a full circular economy. In a first step, the present waste policy frameworks, institutions and existing incentives at national level are examined in order to disclose regulatory and policy gaps. Based on this, the second part of the paper describes and analyses specific waste-related resource efficiency instruments with regard to their potential impacts under the constraints of various barriers. Based on the assessment of the country analyses and the innovative instruments, the paper draws conclusions on waste policy mixes and political needs.
We conducted a random allocation experiment at fashion week in Berlin in 2017, testing how face-to-face (f2f) communication affects sales of a fashion start-up focusing on second-hand. The experiment revealed that 11% of guests of an f2f event afterwards turned paying customers with an average basket size 11.8% higher than the overall sales event average. We add insights to research on entrepreneurial practice as well as on offline operations in the context of circular consumption in fashion, exposing the leveraging effect of f2f communication for customer acquisition and revenue of start-ups in the field of sustainable fashion.
The article introduces and exemplifies the approach of evidence-based narratives (EBN). The methodology is a product of co-design between policy-making and science, generating robust intelligence for evidence-based policy-making in the Directorate General for Research and Innovation of the European Commission (DG RTD) under the condition of high uncertainty and fragmented evidence. The EBN transdisciplinary approach tackles practical problems of future-oriented policy-making, in this case in the area of programming for research and innovation addressing the Grand Societal Challenge related to climate change and natural resources. Between 2013 and 2018, the EU-funded RECREATE project developed 20 EBNs in a co-development process between scientists and policy-makers. All EBNs are supported with evidence about the underlying innovation system applying the technological innovation systems (TIS) framework. Each TIS analysis features the innovation, its current state of market diffusion and a description of the innovation investment case. Indicators include potential future market sizes, effects on employment and environmental and social benefits. Based on the innovation and TIS function analyses, the EBNs offer policy recommendations. The article ends with a critical discussion of the EBN approach.
The growing demand for timber, in particular for renewable energy, increases pressures on global forests and requires a robust monitoring system to ensure sustainability. This article takes a first step toward more systemic monitoring by asking how the global use of forests by EU consumers can be accounted for. Specifically, this article builds on and develops the method of global land use accounting to account for the EU-27's consumption of primary timber between 2002 and 2011 in terms of both volume and forest area. It assesses international trade flows for around 100 commodities and converts them into a volume of primary raw timber based on conversion values. Results reveal that both imports and exports increased over the assessed time period, with primary EU-27 timber estimated to be around 1 m3/cap in 2011. Gaps, uncertainty and a lack of harmonization regarding especially trade data and conversion values are key challenges to further improving the robustness of the method and reliability of results. Future research may focus on improving the method to address in particular recycled and recovered flows as well as the question of whether area or volume is the most appropriate metric for further development of a forest footprint indicator.
Reuse is still seen as a "niche phenomenon" and consumers seem to waste economic opportunities linked to buying and selling second-hand products. For this reason, this paper focuses on incentives and barriers to sell and buy second-hand products, as indicated in the literature, and applies a theoretical framework of transaction costs to explain the existing consumption patterns. For this paper, a representative online survey was conducted in which 1023 consumers in Germany participated, age 16 and older. The data were analyzed for statistically significant deviations between different groups of economic actors selling or buying second-hand products. Results show that valuable unused products exist in households, but barriers such as uncertainties about the reliability of the buyer or the quality of the product hinder the transition into sustainable consumption. Different forms of transaction costs are important explanatory variables to explain why consumers nevertheless predominantly buy new products, although they are aware that second-hand would save money and make an individual contribution to climate protection.
Electronics containing growing quantities of high value and critical metals are increasingly used in automobiles. The conventional treatment practice for end-of-life vehicles (ELV) is shredding after de-pollution and partial separation of spare parts. Despite opportunities for resource recovery, the selective separation of components containing relevant amounts of critical metals for the purpose of material recycling is not commonly implemented. This article is aimed to contribute to recycling strategies for future critical metal quantities and the role of extended material recovery from ELVs. The study examines the economic feasibility of dismantling electronic components from ELVs for high value metal recycling. The results illustrate the effects of factors as dismantling time, labour costs and logistics on the economic potential of resource recovery from ELVs. Manual dismantling is profitable for only a few components at the higher labour costs in western/northern parts of Europe and applicable material prices, including the inverter for hybrid vehicles, oxygen sensor, side assistant sensor, distance and near distance sensors. Depending on the vehicle model, labour costs and current material prices, manual dismantling can also be cost-efficient for also some other such as the heating blower, generator, starter, engine and transmission control, start/stop motor, drive control, infotainment and chassis control.