Refine
Has Fulltext
- yes (48) (remove)
Year of Publication
Document Type
- Report (23)
- Conference Object (14)
- Peer-Reviewed Article (10)
- Contribution to Periodical (1)
Die Städte tragen weltweit am stärksten zum Klimawandel bei. Wer mit dem Klimaschutz ernst machen will, muss also dort ansetzen. Eine Metropole in einen weitgehend CO2-freien Ballungsraum umzuwandeln, ist eine sehr anspruchsvolle, aber machbare Aufgabe, die natürlich nicht umsonst zu haben ist, sich im Großen und Ganzen aber rechnet. Wie eine aktuelle Studie zeigt, lässt sich die weitgehende CO2-Freiheit aber nur realisieren, wenn der gesamte Entwicklungsprozess der urbanen Infrastrukturen in die Stadt-, Gebäude-, Verkehrs- und Energieplanung sowie in die Investitionsentscheidungen der privaten Akteure vorrangig integriert wird. Und wenn alle mitziehen: Verwaltungen, Stadtplaner, Energieversorger und der Bürger.
Preventing the worst consequences of climate change would require that GHG emissions be reduced to levels near zero by the middle of the century. To respond to such a daunting challenge, we need to rethink and redesign the currently highly energy-dependent infrastructures of industrial societies and particularly the urban infrastructures to become low- or even zero-carbon cities. Sustainable urban infrastructures need technology. In this paper focused on Western European Cities, we discuss a wide set of technologies in the fields of building, energy and transport infrastructures that can significantly contribute to a reduction of energy and/or GHG emissions and are already available or are in the pipeline. Based on the review of a recent study for the city of Munich, we then present how a mix of these technologies could reduce CO2-emissions by up to 90% for the metropolis of 1.3 million inhabitants and that this strategy could be economically attractive despite a high initial investment.
All of the residential buildings of a city like Munich could be entirely redesigned for EUR 200 per inhabitant annually, which is about one third of an average annual natural gas bill.
International consensus is growing that a transition towards a low carbon society (LCS) is needed over the next 40 years. The G8, the Major Economies Forum on Energy and Climate, as well as the Ad Hoc Working Group on Long-term Cooperative Action under the United Nations Framework Convention on Climate Change, have concluded that states should prepare their own Low-emission Plans or Low-emission Development Plans and such plans are in development in an increasing number of countries.
An analysis of recent long-term low emission scenarios for Germany shows that all scenarios rely heavily on a massive scale up of energy efficiency improvements based on past trends. However, in spite of the high potential that scenario developers assign to this strategy, huge uncertainty still exists in respect of where the efficiency potentials really lie, how and if they can be achieved and how much their successful implementation depends on more fundamental changes towards a more sustainable society (e.g. behavioural changes).
In order to come to a better understanding of this issue we specifically examine the potential for energy efficiency in relation to particular demand sectors. Our comparative analysis shows that despite general agreement about the high importance of energy efficiency (EE), the perception on where and how to achieve it differ between the analysed scenarios. It also shows that the close nexus between energy efficiency and non-technical behavioural aspects is still little understood. This leads us to the conclusion that in order to support energy policy decisions more research should be done on energy efficiency potential. A better understanding of its potential would help energy efficiency to fulfil its role in the transition towards a LCS.
Ziel des Projekts war es, für die Kölner Politik konkrete Handlungsfelder sowie Handlungsoptionen im Verkehrsbereich zu benennen, die wesentlich zu einer Reduktion der verkehrsbedingten CO2-Emissionen und damit zum Erreichen der nationalen und regionalen Klimaschutzziele beitragen können. Zur Beschreibung des Status quo und zum Benchmarking mit anderen Städten wurde eine fortschreibungsfähige Energie- und CO2-Bilanz für den Verkehrssektor erstellt. Zudem wurden sämtliche Maßnahmen recherchiert und systematisiert, die seit 1990 im Verkehrsbereich in Köln umgesetzt wurden oder derzeit umgesetzt werden und durch deren Umsetzung eine Reduzierung verkehrsbedingter CO2-Emissionen möglich ist. Auf Basis der Bilanzierung und der Maßnahmenübersicht wurden zusätzliche verkehrliche Klimaschutzmaßnahmen identifiziert, die stadtspezifisch geeignet sind, weitere CO2-Reduktionspotenziale zu erschließen.
The Low Carbon Future Cities (LCFC) project aims at facing a three dimensional challenge by developing an integrated city roadmap balancing: low carbon development, gains in resource efficiency and adaptation to climate change. The paper gives an overview of the first outcomes of the analysis of the status quo and assessment of the most likely developments regarding GHG emissions, climate impacts and resource use in Wuxi - the Chinese pilot city for the LCFC project. As a first step, a detailed emission inventory following the IPCC guidelines for Wuxi has been carried out. In a second step, the future development of energy demand and related CO2 emissions in 2050 were simulated in a current policy scenario (CPS). In parallel, selected aspects of material and water flows for the energy and the building sector were analyzed and modeled. In addition, recent and future climate impacts and vulnerability were investigated. Based on these findings, nine key sectors with high relevance to the three dimensions could be identified. Although Wuxi's government has started a path to implement a low carbon plan, the first results show that, for the shift towards a sustainable low carbon development, more ambitious steps need to be taken in order to overcome the challenges faced.
Zielsetzung des Forschungsprojektes war es, Klimaschutzszenarien für Deutschland zu entwickeln, die hinsichtlich ihres klimapolitischen Ziels, d.h. ihres langfristigen Emissionsminderungsbeitrags, im Wesentlichen gleich sind, die aber zum Teil auf unterschiedliche Optionen zur Reduktion der energiebedingten CO2-Emissionen setzen. Diese Klimaschutzszenarien wurden hinsichtlich sozioökonomischer und ökologischer Kriterien evaluiert und miteinander verglichen.
This paper draws upon an extensive transdisciplinary scenario development in the context of the stakeholder oriented preparation of the climate protection plan of the German federal state North Rhine-Westphalia, which is home to the most important heavy industry cluster in Europe. In that context we developed differentiated bottom up climate change mitigation strategies and scenarios for the major energy intensive industries aluminium, iron and steel, cement, lime, paper and steam cracker for olefin production together with representatives of industry as well as society.
Urbanization and climate change are amongst the greatest challenges of the 21st century. In the "Low Carbon Future Cities" project (LCFC), three important problem dimensions are analysed: current and future GHG emissions and their mitigation (up to 2050); resource use and material flows; and vulnerability to climate change.
The industrial city of Wuxi has been the Chinese pilot city of the project. To establish the pathway for a low carbon future, it is crucial to understand the current situation and possible future developments. The paper presents the key results of the status quo analysis and the future scenario analysis carried out for Wuxi. Two scenarios are outlined. The Current Policy Scenario (CPS) shows the current most likely development in the area of energy demand and GHG emissions until 2050. Whereas the extra low carbon scenario (ELCS) assumes a significantly more ambitious implementation, it combines a market introduction of best available technologies with substantial behavioural change. All scenarios are composed of sub-scenarios for the selected key sectors.
Looking at the per capita emissions in Wuxi, the current levels are already high at around 12 tonnes CO2 per capita compared to Western European cities. Although Wuxi has developed a low carbon plan, the projected results under current policies (CPS) show that the total emissions would increase to 23.6 tonnes CO2 per capita by 2050. If the ELCS pathway was to be adopted, these CO2 emission levels could be reduced to 6.4 tonnes per capita by 2050.
The CO2 utilisation is discussed as one of the future low-carbon technologies in order to accomplish a full decarbonisation in the energy intensive industry. CO2 is separated from the flue gas stream of power plants or industrial plants and is prepared for further processing as raw material. CO2 containing gas streams from industrial processes exhibit a higher concentration of CO2 than flue gases from power plants; consequentially, industrial CO2 sources are used as raw material for the chemical industry and for the synthesis of fuel on the output side. Additionally, fossil resources can be replaced by substitutes of reused CO2 on the input side. If set up in a right way, this step into a CO2-based circular flow economy could make a contribution to the decarbonisation of the industrial sector and according to the adjusted potential, even rudimentarily to the energy sector.
In this study, the authors analyse potential CO2 sources, the potential demand and the range of applications of CO2. In the last chapter of the final report, they give recommendations for research, development, politics and economics for an appropriate future designing of CO2 utilisation options based upon their previous analysis.
The German federal state of North Rhine-Westphalia (NRW) is home to one of the most important industrial regions in Europe, and is the first German state to have adopted its own Climate Protection Law (CPL). This paper describes the long-term (up to 2050) mitigation scenarios for NRW’s main energy-intensive industrial sub-sectors which served to support the implementation of the CPL. It also describes the process of scenario development, as these scenarios were developed through stakeholder participation. The scenarios considered three different pathways (best-available technologies, break-through technologies, and CO2 capture and storage). All pathways had optimistic assumptions on the rate of industrial growth and availability of low-carbon electricity. We find that a policy of "re-industrialisation" for NRW based on the current industrial structures (assumed here to represent an average growth of NRWs industrial gross value added (GVA) of 1.6% per year until 2030 and 0.6% per year from 2030 to 2050), would pose a significant challenge for the achievement of overall energy demand and German greenhouse gas (GHG) emission targets, in particular as remaining efficiency potentials in NRW are limited. In the best-available technology (BAT) scenario CO2 emission reductions of only 16% are achieved, whereas the low carbon (LC) and the carbon capture and storage (CCS) scenario achieve 50% and 79% reduction respectively. Our results indicate the importance of successful development and implementation of a decarbonised electricity supply and breakthrough technologies in industry - such as electrification, hydrogen-based processes for steel, alternative cements or CCS - if significant growth is to be achieved in combination with climate mitigation. They, however, also show that technological solutions alone, together with unmitigated growth in consumption of material goods, could be insufficient to meet GHG reduction targets in industry.
On behalf of the Port of Rotterdam Authority, the Wuppertal Institute developed three possible pathways for a decarbonised port of Rotterdam until 2050. The port area is home to about 80 per cent of the Netherlands' petrochemical industry and significant power plant capacities. Consequently, the port of Rotterdam has the potential of being an international leader for the global energy transition, playing an important role when it comes to reducing CO2 emissions in order to deliver on the EU's long-term climate goals.
The three decarbonisation scenarios all built on the increasing use of renewables (wind and solar power) and the adoption of the best available technologies (efficiency). The analysis focuses on power plants, refineries and the chemical industry, which together are responsible for more than 90 per cent of the port area's current CO2 emissions.
The decarbonisation scenarios describe how CO2 emissions could be reduced by 75 to 98 per cent in 2050 (compared to 2015). Depending on the scenario, different mitigation strategies are relied upon, including electrification, closure of carbon cycles or carbon capture and storage (CCS). The study includes recommendations for local companies, the Port Authority as well as policy makers. In addition, the study includes a reference scenario, which makes it clear that a "business as usual" mentality will fall well short of contributing adequately to the EU's long-term climate goals.
Um weltweit hochindustrialisierte, energieintensive Bundesländer und Regionen bei der Entwicklung und Umsetzung von innovativer Klimapolitik zu unterstützen, wurde die "Energy Transition Platform" ins Leben gerufen. Ziel ist der Austausch von Erfahrungen sowie eine Einflussnahme auf den internationalen Klimadialog. Für diesen Austausch- und Dialogprozess erarbeitete das Wuppertal Institut für die "Climate Group" die Fallstudie "Eine Industrieregion im Wandel - Energie- und klimapolitische Rahmenbedingungen, Strategien und Instrumente in NRW". In dem Bericht werden aktuelle energie- und klimapolitische Entwicklungen, Politikinstrumente und Modellprojekte dargestellt und diskutiert.
Die Fallstudie macht deutlich, dass Nordrhein-Westfalen bei der Umsetzung der Energiewende zwar vor besonderen Herausforderungen steht, die Modernisierung des Energiesystems und des Industriestandortes NRW jedoch mit Hilfe eines vielfältigen Instrumentariums systematisch und intensiv angeht. Eine solche proaktive und langfristig ausgelegte Herangehensweise ist zentrale Voraussetzung dafür, dass die bevorstehende Transformation letztlich nicht zu einem kaum steuerbaren Strukturbruch in NRW und seinen Regionen und Kommunen führt, sondern zu einem schrittweisen Strukturwandel, der von Politik, Wirtschaft und Gesellschaft gemeinsam gestaltet wird.
Im Rahmen der Energiewende haben sich erneuerbare Energien zur Stromerzeugung in Deutschland bereits etabliert. Um jedoch das volle Potenzial der Reduktion von fossilen Energien und Treibhausgasen (THG) auszuschöpfen, muss aus der Energiewende auch eine Wärmewende werden. Der Energieeinsatz für die Wärmebereitstellung der Industrie betrug im Jahr 2012 etwa 535 TWh (22 % des Endenergiebedarfs Deutschlands), hauptsächlich bereitgestellt durch Erdgas (48 %) und Steinkohle (17 %) 1. Damit wurden für die Wärmebereitstellung im Industriesektor rund 159 Mio. t CO2-äq emittiert, was 17 % der THG-Emissionen Deutschlands entspricht.
Aufgrund der Vielseitigkeit der einzelnen Branchen und Wärmeanwendungen im Industriesektor kann dieser Beitrag nur beispielhaft einzelne Komponenten für eine Wärmewende aufzeigen, die auch wiederum die Aktivitäten der einzelnen Autoren widerspiegeln. Ausgehend von einer nationalen Betrachtung und expliziten Modellierungsergebnissen für die energieintensive Industrie in NRW, werden einzelne Potenziale und Aktivitäten im Bereich der Wärmebereitstellung, -speicherung und -integration behandelt.
The Greens / European Free Alliance Group of the European Parliament contracted Wuppertal Institute in collaboration with Energiaklub to develop scientifically sound, comprehensive, alternative, and sustainable long term energy scenarios for Hungary, which cover potential development paths till 2030 and 2050. The scenarios developed deliver information about the costs and long-term effects of different energy choices for Hungary as well as credible information on potential benefits of greening the energy mix. As a result, the study aims to provide policy makers with better evidence for making informed, prudent and forward-thinking decisions in this field.
The need for deep decarbonisation in the energy intensive basic materials industry is increasingly recognised. In light of the vast future potential for renewable electricity the implications of electrifying the production of basic materials in the European Union is explored in a what-if thought-experiment. Production of steel, cement, glass, lime, petrochemicals, chlorine and ammonia required 125 TW-hours of electricity and 851 TW-hours of fossil fuels for energetic purposes and 671 TW-hours of fossil fuels as feedstock in 2010. The resulting carbon dioxide emissions were equivalent to 9% of total greenhouse gas emissions in EU28. A complete shift of the energy demand as well as the resource base of feedstocks to electricity would result in an electricity demand of 1713 TW-hours about 1200 TW-hours of which would be for producing hydrogen and hydrocarbons for feedstock and energy purposes. With increased material efficiency and some share of bio-based materials and biofuels the electricity demand can be much lower. Our analysis suggest that electrification of basic materials production is technically possible but could have major implications on how the industry and the electric systems interact. It also entails substantial changes in relative prices for electricity and hydrocarbon fuels.
Energy intensive industries are one of the fields in which strong increases of energy efficiency and deep decarbonisation strategies are particularly challenging. Although European energy intensive industries have already achieved significant energy and greenhouse gas reductions in the past, much remains to be done to make a significant contribution to achieving European as well as national climate mitigation targets of greenhouse gas emission reductions by -80% or more (compared to the baseline of 1990). North Rhine-Westphalia (NRW) is a European hotspot for coping with this challenge, accommodating more than 10% of the energy intensive industries of the EU28. It is also the first German state to have adopted its own Climate Law, enacting state-wide CO2 emission reductions by 80% until 2050 compared to 1990. The state government initiated the project "Platform Climate Protection and Industry North-Rhine Westphalia" to identify and develop the necessary far-reaching low carbon innovation strategies for energy intensive industries. Heart of the project was a dialogue process, which involved a broad spectrum of stakeholders from steel, chemical, aluminium, cement, glass and paper producing industries. Besides enhancing and broadening the knowledge on high efficiency and low-carbon technologies within industries, the aim was to explore possible pathways and preconditions for the application of these technologies in energy intensive industries as well as to strengthen the motivation of companies for initiatives and investments in technologies with lower CO2 emissions. The results of the dialogue shall provide a basis for a possible low-carbon industry roadmap NRW and may also serve as an example for other industrialized regions in the EU and globally. The paper sketches the structured dialogue process with the stakeholders from companies as well as industrial associations and presents the learnings regarding the engagement of energy intensive industries into ambitious climate policies on a regional level. These include existing limitations as well as chances in the respective sectors on the state level, regarding their economic and technical structures as well as their innovation systems. The findings are based on more than a dozen stakeholder workshops with industry companies and more than 150 individual representatives of NRW's energy intensive industries as well as on background research in the initial phase of the project.
Heat integration and industrial symbiosis have been identified as key strategies to foster energy efficient and low carbon manufacturing industries (see e.g. contribution of Working Group III in IPCC's 5th assessment report). As energy efficiency potentials through horizontal and vertical integration are highly specific by site and technology they are often not explicitly reflected in national energy strategies and GHG emission scenarios. One of the reasons is that the energy models used to formulate such macro-level scenarios lack either the necessary high technical or the spatial micro-level resolution or both. Due to this lack of adequate tools the assumed huge existing potentials for energy efficiency in the energy intensive industry cannot be appropriately appreciated by national or EU level policies. Due to this background our paper describes a recent approach for a combined micro-macro energy model for selected manufacturing industries. It combines national level technical scenario modelling with a micro-modelling approach analogous to total site analysis (TSA), a methodology used by companies to analyse energy integration potentials on the level of production sites. Current spatial structures are reproduced with capacity, technical and energy efficiency data on the level of single facilities (e.g. blast furnaces) using ETS data and other sources. Based on this, both, the investments in specific technologies and in production sites are modelled and the evolvement of future structures of (interconnected) industry sites are explored in scenarios under different conditions and with different objectives (microeconomic vs. energy efficiency optimization). We further present a preliminary scenario that explores the relevance of these potentials and developments for the German steel industry.