Refine
Year of Publication
Document Type
- Conference Object (123) (remove)
Language
- English (123) (remove)
Division
- Energie-, Verkehrs- und Klimapolitik (123) (remove)
On the pathway to climate neutrality, EU member states are obliged to submit national energy and climate plans (NECPs) with planned policies and measures for decarbonization until 2030 and long-term strategies (LTSs) for further decarbonization until 2050. We analysed the 27 NECPs and 15 LTSs submitted by October 2020 using an interrater method. This paper focuses on energy sufficiency policies and measures in the transport sector.
We found a total of 236 sufficiency policy measures with more than half of them (53 %) in the transport/mobility sector. Additionally, we found 41 measures that address two or more sectors (cross-sectoral measures). From the explicit sufficiency measures within the transport sector, 82 % aim at modal shift. A reduction of transport volumes is much less addressed. Countries plan to use mainly fiscal and economic instruments. Those are in many cases investments in infrastructure of low-carbon transport modes and taxation instruments. Plans on decarbonisation measures are also frequently mentioned. The majority of cross-sectoral measures are carbon taxes or tax reforms, also economic instruments.
On the one hand it is encouraging that Member States strongly emphasize the transport sector in their NECPs and LTSs - at least quantitatively and concerning sufficiency measures - because this sector has been the worst-performing in climate mitigation so far. On the other hand, the measures described seem not sufficient to reach ambitious climate targets, and we doubt that the presented set of policy instruments will get the transport sector on track to mitigate greenhouse gas emissions in the necessary extent.
Future of car-sharing in Germany : customer potential estimation, diffusion and ecological effect
(2007)
The potential of natural gas as a bridging technology in low-emission road transportation in Germany
(2011)
The German climate change programme (2000) identified the residential sector as one of the main sectors in which to achieve additional GHG reductions. Our case study compiles results of existing evaluations of the key policies and measures that were planned and introduced and carries out some own estimates of achievements. We show, which emission reductions and which instruments where planned and what was delivered until 2004.
Legal instruments such as the revised building code were introduced later than planned and their effects will - at least partly - fall behind expectations. Other legal instruments such as minimum energy performance standards for domestic appliances etc. were - in spite of the programme - not implemented yet.
On the other hand, substantial financial incentives were introduced. Especially schemes granting low-interest loans for building renovation were introduced. However tax subsidies for low-energy buildings were phased out.
In general we can conclude from our case study that Germany was not able to compensate for the slower or restricted implementation of legal instruments through the introduction of financial incentives. Particularly the efficient use of electricity has been left aside as almost no further policy action was taken since 2001.
Thus energy efficiency in the residential sector will not deliver the GHG reductions planned for in the German climate change programme until 2005. From our findings we draw conclusions and recommendations towards policy makers: Which lessons are to be learnt and what has to be done in order to fully harness EE potentials in residential sector as planned for 2010?
"400,000 new homes per year are needed in German cities." This figure has been cited repeatedly in political discussions, media, and statements of different groups for a couple of years now. Living space is needed to mitigate the (further) inordinate increase of rents in some cities and regions and to ease finding appropriate flats at affordable prices for low- and medium-income households. But how to activate investors and the real estate market?
Having the triangle of sustainability in mind with its ecologic, social and economic cornerstones the discussion - metaphorically spoken - currently pulls the three corners: Which should have the highest priority?
The economically driven most favourable solution is lowering the requirements for new buildings such as the energy performance to make building cheaper. The social perspective prefers an increase of public social housing investments regardless of efficiency standards. And the ecological side argues that a high performance is needed to reach energy and climate targets in the buildings sector.
Starting at this point of discussion, firstly, the paper reflects the assumptions behind the numbers of new homes needed against a sufficiency background.
Secondly, it presents current changes in German building policies: a new legislation for energy supply and efficiency is currently in preparation.
It discusses the potential to integrate sufficiency aspects in building policies, focussing specifically on the new regulation, financial incentives, and energy advice.
The paper analyses if and to what extent it is likely to balance the three cornerstones of sustainability by integrating sufficiency aspects into efficiency policies. Household experiences with prepayment meters are used as an example to illustrate the potential for tapping efficiency and sufficiency potentials in low-income households considering social, economic, and ecological aspects. Based on the identified (in)consistencies, thirdly, it suggests further development in German policies to make better use of synergies between the ecologic, social and economic demands on buildings.
Bad Hersfeld is a small city with about 30.000 inhabitants situated in the middle of Germany. Climate Protection has been on the political agenda in Bad Hersfeld since quite a while. In 1997 the Wuppertal Institute elaborated a first energy and CO2 balance for the city, which was updated in 2007. With the compilation of the CO2 balance it was shown that the emissions in Bad Hersfeld almost stayed at a constant level between 1997 and 2006.
The result was sobering for the local authority. Although some single measures had been implemented, there was no improvement of the CO2-balance.
It was concluded that a successful climate protection strategy needs a comprehensive concept comprising all sectors and a periodic monitoring. Bad Hersfeld commissioned the Wuppertal Institute to develop feasible measures to reduce the CO2 emissions drastically and instruments to overcome existing barriers. In a close cooperation with the City Council and the local municipal utility a climate protection concept was compiled that is rather ambitious for a city of this size.
In consideration of the regional peculiarities12 concrete measures and 7 accompanying measures build the core of the concept with a main focus on energy efficiency (final energy), combined heat and power (CHP) and renewable energies. Another important part of the concept is a municipal support programme to develop the endogenous efficiency potentials and renewable energies in the region. Further to these planning instruments, information and networking activities are compiled as well as a variety of suggestions for a climate protection marketing (Wagner 2008).
Some of these measures that were developed in an iterative and cooperative process between the responsible actors in Bad Hersfeld and the Wuppertal Institute are transferable to other cities and towns. The impeding factors in Bad Hersfeld like the user-investor dilemma, the low capital of small housing associations or the large stock of listed historical buildings, are typical for cities of this size.
After a wave of privatizations in the end of the 1990s, the electrical power supply of many municipalities in Germany has been returned into public hands. Many municipalities discover chances and possibilities for local action, which arise with remunicipalisation. The local policy-makers realize that remunicipalisation offers the opportunity of implementing an independent energy policy at local level which is critical in creating a transformation to a sustainable energy system based on energy efficiency and renewable energies. The municipal ownership allows a strong governance towards more political influence in the local energy market. In addition, there is a clear opinion of the population: 81 % of citizens surveyed say they trust their local municipal utility, compared to only 26 % who say they trust corporations (VKU-Survey, 2010). In summary, there are many good reasons for local politicians to establish their own municipal utilities. The payback for municipalities is tangible when the local utility focuses on reliably providing affordable energy rather than on increasing its returns. The new municipal power utilities stimulate competition and contribute to the renewal / restructuring of the traditional energy market.
The founding of 72 municipal utilities since 2005 leads us to ask for the reasons. The study reviews the German trend towards municipal ownership of local utilities, assessing their performance based on 10 targets related to the energy transition, climate protection, and the local economic impact: 1. Achieving environmental objectives and organization of the local "Energiewende". 2. Higher local added value. 3. Harnessing tax regulations for improving municipal services. 4. Improving the income situation of the city. 5. Democratization of supply and stronger orientation towards the common good (public value). 6. Creating and protecting good jobs. 7. Acting in social responsibility in energy supply. 8. Expansion of eco-efficient energy services. 9. Harnessing customer relations and public image. 10. Materialising synergies with other sectors.
Based on expert opinions, the study finds out that the likelihood of these targets being reached is "high to very high". The aim of this article is to provide a compact and basic understanding of the possible reasons for the phenomenon of remunicipalisation.
In 2016, the European Commission presented the Clean Energy for all Europeans Package , comprising legislative proposals to facilitate the clean energy transition within the EU, such as the revised EPBD 2010/31/EU and EED 2012/27/EU.Besides putting energy efficiency first and achieving global leadership in renewable energy, a third goal of the package was to provide a "fair deal to consumers" with "no one left behind"., While in some Member States the issue of energy poverty already was on the political agenda, enabling affordable access to basic energy services for all households and thus reducing energy poverty is now an explicit policy target of the revised EU Directives.
In order to assess and monitor the extent of the issue across the EU and address it by suitable measures, the concept of energy poverty needs to be defined, operationalised and measured. The paper aims to investigate the role of energy poverty indicators for policy making. To do so, it provides an overview on existing measurement approaches.Furthermore, the paper presents the development and current state of energy poverty across the EU using a set of four complementary indicators used by the EU Energy Poverty Observatory. These consensual and expenditure-based indicators are calculated using data from the EU Survey on Income and Living Conditions and the Household Budget Survey.
In addition, the paper highlights peculiarities of results on the different indicators, describes persisting issues with regard to their calculation and interpretation against the background of the underlying data base.
Based on the results of this analysis, further necessities of data collection and research are pointed out.
One of the most pressing issues of climate policy is how to get building owners to invest in the energy efficiency of their homes. The German federal government has set the goal of decreasing the energy demand of buildings by 80 to 95 percent until 2050. One pillar of the strategy to support building owners in this task is the provision of targeted energy advice, to both motivate owners to implement an energy efficiency refurbishment and help them to choose the most efficient measures. In this paper we analysed the demand for energy advice in three German cities of the Ruhr area finding the number of energy consulting provided to be extremely low compared to the stated goals. Based on the approach of joint knowledge production we invited stakeholders from the three cities to participate in a series of workshops in order to develop ideas how to more effectively bring homeowners and energy advisors together. As a result, different energy advice experiments were co-operatively developed for each city targeting different groups by using tailored channels for outreach. The evaluation of both the process as well as the outcome of the experiments indicates that while joint knowledge production is a suitable approach to enable knowledge transfer and formation of new networks between different stakeholders in science and practice, it does not necessarily lead to superior approaches with regard to effectively addressing a policy issue at hand. Apart from the experiment in which the window of opportunity change of building ownership was taken advantage of, participation of target groups in the experiments has been soberingly low, underlining the value of so-called trigger points when designing effective outreach strategies to building owners.
The Fit for 55 package stipulates a fair, competitive and green transition by 2030 and beyond. As part of this, increasing attention is given to the decarbonisation of the building stock: only 1 % of buildings in Europe are retrofitted each year, a number which must double if the EU is to meet its 2050 targets. Significant energy efficiency investments are needed, whilst the planned expansion of the EU-ETS to the building sector in 2026 will likely pass the carbon cost onto the consumer. This will increase the cost burden placed on low-income households, exacerbating energy poverty, if these two strategies are not counterbalanced by adequate policies and support mechanisms.
The European Private Rented Sector (PRS) is often side-lined by policymakers when implementing energy efficiency policies to tackle energy poverty. As many as 1 in 10 Europeans spend 40 % or more of their income on housing costs, with those in the PRS struggling with energy-related problems, such as poor energy efficiency and maintenance, to a much greater degree than the general population. Understanding these challenges and creating targeted policies is of critical scientific and policy importance.
To date, a pan-European policy on how to address energy poverty and energy efficiency improvements in the PRS is lacking; current European Union instruments to address such issues (including the Fit for 55, and the Clean Energy Package that preceded it) lack a dedicated approach towards the complex structural issues embedded in the European PRS. What is more, there is a limited understanding of the character of energy poverty in such residential dwellings, as well as policies to address energy injustices. We therefore examine current and historical disparities in energy poverty between the EU's PRS tenants and the general population by analysing a variety of quantitative indicators which reflect different dimensions of energy poverty. We then take stock of the policy landscape, identifying energy efficiency policies tailored to alleviate energy poverty in the PRS and common challenges. We subsequently interrogate possible solutions, drawing on existing good practice policies. In so doing, we aim to reduce the sector's political invisibility by addressing the lack of disaggregated, targeted data and dismantling barriers that currently lead to the PRS being disproportionately affected by energy poverty.
Consumption by private households in various areas of demand - housing, mobility, nutrition, services and products - contributes to around 10 % of total emissions in Germany. Of this, higher-income households are responsible for a disproportionate share. At the same time, many households often lack the knowledge, time, or motivation to deal with their own energy-relevant and climate-impacting behaviours. In this context, energy advice services play an important role for raising awareness, activating consumers and imparting knowledge about available options for action. However, conventional energy advice services are mostly limited to the topics of building and appliance energy efficiency - especially for middle- and high-income households - without considering private consumption behaviour and the related social practices as a whole. In practice, there has been little differentiation to date in addressing target groups in a way that takes into account different lifestyles and realities and the underlying values and motivations in a pluralistic society. The present paper presents a methodological approach to develop targeted energy advice approaches in urban environments that are oriented towards the motivations of different types of households with medium and high incomes. It proposes a three-step approach consisting of 1) a microdata-based population analysis to identify and categorize target subgroups, 2) an inventory of existing advice offers with regard to their coverage and approach and 3) a gap analysis based on the results of the preceding steps. Applied to a large city in Germany, the analysis finds that gaps are rarely found with regard to communicated facts but rather the way in which information is conveyed. Accordingly, recommendations relate to more effectively use windows of opportunity and framing of measures to match target group motivations.
Urban development faces numerous challenges in the 21st century and a central task is the sustainable and liveable design of the city. Can the concept of a Smart City be a tool to making cities more liveable and sustainable? To find out, we chose a biographical method to analyse the steps towards a successful Smart City and to better understand the structures behind it. We combine the innovation biography method with a process model from sustainability governance research, namely Steurer's sustainability governance model and apply them to Vienna's Smart City, especially the preparation of the Vienna Smart City framework strategy (Steurer & Trattnigg, 2010). On the one hand, this article shows that a transfer of the innovation biography method to urban research can generate deeper insights on urban development processes in general. On the other hand, the approach chosen can show that Vienna integrates the sustainable urban design into the process of Smart City design. So the smart and sustainable city design, often called for in theoretical contributions, is practised in Vienna. Due to its reconstructive character, the biographical method has revealed that it is possible to govern sustainability by using Smart City as an umbrella strategy, as long as one manages it in an integrated and holistic way, recognises trends and is able to acquire and use research funds effectively and efficiently.
The knowledge gained from the new method for urban and Smart City research is twofold. Firstly, the transfer of the method previously developed in the human sciences and subsequently for organisations, institutions and products and services also works in urban research. Second, the innovation biography provides in-depth insights into the process towards the Smart City and the stakeholders involved. The use of the biographical method highlights the relevance of good governance in terms of interdisciplinary cooperation on the one hand and high political commitment on the other through the micro-level perspective and is also sensitive enough to highlight the importance of an appropriate narrative in and for the process towards the Smart City.
The concept of sufficiency - reducing energy uses beyond technical efficiency - is far-reaching and requires a reflection on human needs, energy services, urban structures, social norms, and the role of policies to support the shift towards lower-energy societies. In recent years, a growing body of literature has been published on energy sufficiency in various disciplines. However, there has been limited exchanges and cooperation among researchers so far, hindering the visibility and impact of this research. This paper presents an assessment of where sufficiency research stands, especially in the perspective of policy-making. It is the first overview paper issued in the context of the newly-founded ENOUGH network - International network for sufficiency research & policy, established in 2017. In the first part, we provide a condensed literature review on energy sufficiency, based on dozens of recent references collected through the network. Through four main themes (the nature of sufficiency, the challenges of modelling it, the barriers to its diffusion, and the approaches to foster it), we summarise the key issues and approaches. We then present what the scholars themselves see as the priorities for future research, promising sufficiency policy options, and key barriers that research should help overcome. We collected their views through a questionnaire completed by more than 40 knowledgeable authors and experts from various disciplines. We finally build on the previous parts to draw some recommendations on how sufficiency research could increase its impact, notably in relation to policy-making.
An important instrument to enhance the market uptake of energy-efficient new buildings and the energy-efficient renovation of existing buildings in the European Union (EU) are the Energy Performance Certificates (EPC). However, their implementation and use has varied between EU Member States. The European Commission has therefore provided funding to a number of Horizon2020 projects to develop next-generation EPC schemes.
One of these is the QualDeEPC project, aiming to both improve quality and cross-EU convergence of EPC schemes, and particularly the link between EPCs and deep renovation. The objective of the project is to improve the practical implementation of the assessment, issuance, design, and use of EPCs as well as their renovation recommendations, in the participating countries and beyond.
This paper presents the policy proposals and concepts for tools that the QualDeEPC project has developed as priorities for enhanced EPC schemes:
- Improving the recommendations for renovation, which are provided on the EPCs, towards deep energy renovation
- An online tool for comparing EPC recommendations to deep energy renovation recommendations
- Creating Deep Renovation Network Platforms (One-stop Shops plus networking and joint communication of supply-side actors)
- Regular mandatory EPC assessor training (on assessment and renovation recommendations) required for certification/accreditation and registry
- Achieving a high user-friendliness of the EPC
- Voluntary/mandatory advertising guidelines for EPCs
- Improving compliance with the mandatory use of EPCs in real estate advertisements
The paper will focus on the aspects related to improving the impact of EPCs for stimulating deep renovation. It will also present lessons learnt from the discussion with stakeholders at national and European workshops and from the testing of the proposals and tools in around 100 buildings, as well as from the first steps of their country-specific adaptation.
As many other countries, Germany misses to exploit most of its large potential for cost-effective energy efficiency improvements. An organisation collecting funds and allocating them to the most (cost-)effective programmes could be a solution.
Therefore, political parties and trade unions as well as environmental NGOs have called for the creation of such an Energy Efficiency Fund. A recent study by the Wuppertal Institute together with a number of partners, commissioned by the Hans Böckler Foundation, analysed the feasibility of such an institution.
It has been the objective of the project, completed in March 2005, to
identify the added value of an Energy Efficiency Fund,
develop concrete proposals for the institutional setting and the financing of an Energy Efficiency Fund in Germany,
prepare and assess the benefits and costs of a portfolio of innovative but realistic energy efficiency programmes and campaigns, which the Energy Efficiency Fund would implement,
identify the effects of the fundraising and the programmes on different industries, particularly on the suppliers of energy-efficient technologies and services, and on their growth and employment perspectives,
estimate the net employment effects of such an Energy Efficiency Fund and its activities.
This paper presents the results and assesses the usefulness of the project and the participatory elements for increasing the acceptance of such a policy instrument.
In spite of differences in energy policies and supply, Japan and Germany have to master similar challenges: To reorganize the energy supply system towards - in the long term - being reliable, affordable, low in risks and resource use, and climate-neutral. At the same time, the ecological modernization should maintain or even strengthen international competitiveness. To better address these challenges, a bi-national expert council has been established between the two high-tech countries in 2016 - the GJETC.
The aim of the GJETC is to show that despite different starting points, a national energy transition can be more successful, if both countries learn from their strengths and also weaknesses, to avoid the latter. If the implementation of an energy transition in the two countries is socially and economically sound and advances technology innovation and deployment, it may not only double success, but can also serve as blue prints for other countries, especially due to learning from similarities and differences. For example: Why is per capita energy consumption higher in transport in Germany, but energy intensity higher in Japan's building sector? How can variable renewable energies be integrated in an efficient energy system at lowest costs?
The Council meets twice a year, holds stakeholder dialogues and outreach events, and prepares policy papers on strategic topics of mutual interest. Four comprehensive studies, each in cooperation of a German and a Japanese research institute, have been the basis for 15 joint key recommendations during the 1st phase. The 2nd phase to 2020 will study the role of hydrogen and digitalisation for the energy transition, as well as other topics. The paper presents the findings and recommendations of the GJETC of the first phase 2016-18 as well as first results of the second phase. It also reviews the setup of the GJETC and the way it works, to assess if and how it can serve as a role model of bilateral cooperation on the energy transition.
Energy sufficiency has recently gained increasing attention as a way to limit and reduce total energy consumption of households and overall. This paper presents selected results of a research project funded by the German Federal Ministry of Education and Research that examined the potentials and barriers for energy sufficiency with a focus on electricity in households, how household members perceive sufficiency practices, and how policymakers could support and encourage these. Bottom-up calculations for an average 2-person household in Germany yielded a total electricity savings potential from energy efficiency and sufficiency combined of theoretically up to 75 %.
The continuous growth of per capita living space was identified as one important driver for additional energy consumption both for heat and electricity. The paper will present findings of a representative survey of 600 persons responsible for the housework. It revealed that a part of the households is already practicing sufficiency options or are open towards these. Up to 30 % of these households can imagine, given the right conditions and policy support, to move to a smaller dwelling or to share an apartment with others when they are older.
Results of a first comprehensive analysis of an energy sufficiency policy to encourage and support households to sufficiency practices form the second part of the paper, with a focus on the feasibility and potential effectiveness of instruments for limiting the growth in average living space per person. This includes a case study on fostering communal housing projects as a measure to reduce living space. Further, the feasibility of a cap scheme for the total electricity sales of a supplier to its customers was examined. Instruments supporting energy-efficient and sufficient purchase and use of equipment complete the integrated energy sufficiency and efficiency policy package.
The paper will finally present the project's conclusions on an integrated energy sufficiency policy package resulting from this analysis.
Energy sufficiency policy : an evolution of energy efficiency policy or radically new approaches?
(2015)
In the last four decades, energy efficiency increased significantly in OECD countries. However, only during the most recent years, total energy consumption started to decrease a little, and much more slowly than energy efficiency potentials would suggest. Energy sufficiency has therefore gained new attention as a way to limit and reduce total energy consumption of a household or a country overall.
The project "Energiesuffizienz" funded by the German ministry for research has examined what energy sufficiency actually is, and what householders, household members but also manufacturers and local authorities could do to make electricity use in the home more sufficient. The focus of this paper is the policy part of the project - the first comprehensive analysis of an energy sufficiency policy.
The objective is to find out how policy can support market actors in using the energy sufficiency options identified. As for energy efficiency policy, it starts with the gathering of potential sufficiency actions and the analysis of the relevant barriers all market actors face, to derive recommendations for which policy instruments need to be combined to an effective policy package, and which other pre-conditions have to be met. Energy efficiency and energy sufficiency should not be seen as opposed to each other but work in the same direction - saving energy. Therefore, some instruments of the energy sufficiency policy package may be the same as for energy efficiency - such as energy taxation, and linear or progressive energy prices. Some may simply adapt technology-specific energy efficiency policy instruments. Examples are progressive appliance efficiency standards, standards based on absolute consumption, or providing energy advice. However, sufficiency may also require radical new approaches particularly to mitigate the drivers of non-sufficiency. They may range from promotion of completely different services for food and clothes cleaning, to instruments for limiting average dwelling floor area per person, or to a cap-and-trade system for the total electricity sales of a supplier to its customers, instead of an energy efficiency obligation. The paper presents these and other elements of an integrated energy sufficiency policy package resulting from this analysis.
How much energy saving is 1 % per year? : We still don t know, but we know better how to find out
(2009)
Strategic policy packages to deliver energy efficiency in buildings : their international evidence
(2013)
The project "bigEE - Bridging the Information Gap on Energy Efficiency in Buildings" presents comprehensive information for energy efficiency in buildings and the related policy on the international internet-based knowledge platform bigee.net.
To develop the evidence-based information required for bigee.net, we addressed in a different and more systematic way than usual the question of how policy can support improved building energy efficiency most effectively: We combined (1) a theoretical, actor-centred analysis of market-inherent barriers and incentives for all actors in the supply and use chain of (energy-efficient) buildings to derive a recommended package combining the types of policies and measures the actors need to overcome all these barriers, with (2) empirical evidence on model examples of good practice policy packages to check if advanced countries have indeed used the combination of policies we derived from the actor-centred analysis.
In this way, we found that the recommendable policy package for new buildings is similar to the well-known one for appliances, but with the objective to mainstream nearly zero energy buildings. By contrast, the task for existing buildings is two-dimensional - increasing the depth of renovation first, to savings of 50 to 80%, and then the rate of energy-efficient renovation to 2% or more p.a. - and so the policy package needs more emphasis on individual advice, incentives, and financing. The paper presents the recommended packages as well as a comparison of existing national policy packages from California (USA), China, Denmark, Germany, and Tunisia and what we learned from it for effective packages and implementation.
What makes a good policy? : Guidance for assessing and implementing energy efficiency policies
(2013)
Which factors are crucial to successfully design and implement a "good practice" policy to increase the energy efficiency of buildings and appliances? This is one of the main challenges for the new web platform bigee.net that provides guidance on good practice policies.
In this paper we examine the question what "good practice" is by presenting a multi-criteria assessment scheme to analyse different policies worldwide.
The assessment scheme contains a set of criteria addressing key factors leading to the success of a policy as well as its outcomes: a good policy addresses all market players and barriers, avoids lost opportunities and lock-in effects, has ambitious and regularly updated energy efficiency levels, and spill-over effects. Other criteria are high energy savings and the calculated cost-effectiveness.
The assessment scheme provides a standardised data collection approach, which paves the way for both qualitative and quantitative evaluation. Furthermore, it can help policy-makers to transfer a successful policy.
The development of the scheme is based on a literature review of worldwide implemented policies and measures that promote energy-efficiency of buildings and appliances. Criteria were operationalized, including a ranking between 0 and 10. The ranking is a decisive factor whether the policy qualifies as good practice. To demonstrate the practicability of this scheme, the paper analyses a good practice example according to the assessment scheme: Energy-Efficient Refurbishment and Energy Efficient Construction programmes of the German public bank KfW.
The European Horizon 2020-project COMBI ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe") aims at estimating the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in the year 2030. The project goal is to cover the most important technical potentials identified for the EU27 by 2030 and to come up with consistent estimates for the most relevant impacts: air pollution (and its effects on human health, eco-systems/crops, buildings), social welfare (including disposable income, comfort, health and productivity), biotic and abiotic resources, the energy system and energy security and the macro economy (employment, economic growth and the public budget). This paper describes the overall project research design, envisaged methodologies, the most critical methodological challenges with such an ex-ante evaluation and with aggregating the multiple impacts. The project collects data for a set of 30 energy efficiency improvement actions grouped by energy services covering all sectors and EU countries. Based on this, multiple impacts will be quantified with separate methodological approaches, following methods used in the respective literature and developing them where necessary. The paper outlines the approaches taken by COMBI: socio-economic modelling for air pollution and social welfare, resource modelling for biotic/abiotic and economically unused resources, General Equilibrium modelling for long-run macroeconomic effects and other models for short-run effects, and the LEAP model for energy system modelling. Finally, impacts will be aggregated, where possible in monetary terms. Specific challenges of this step include double-counting issues, metrics, within and cross-country/regional variability of effects and context-specificity.
Energy efficiency improvements have numerous benefits/impacts additional to energy and greenhouse gas savings, as has been shown and analysed e.g. in the 2014 IEA Report on "Multiple Benefits of Energy Efficiency". This paper presents the Horizon 2020-project COMBI ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe"), aiming at calculating the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in 2030. The project covers the most relevant technical energy efficiency improvement actions and estimates impacts of reduced air pollution (and its effects on human health, eco-systems/crops, buildings), improved social welfare (incl. disposable income, comfort, health, productivity), saved biotic and abiotic resources, and energy system, energy security, and the macroeconomy (employment, economic growth and public budget). This paper explains how the COMBI energy savings potential in the EU 2030 is being modelled and how multiple impacts are assessed. We outline main challenges with the quantification (choice of baseline scenario, additionality of savings and impacts, context dependency and distributional issues) as well as with the aggregation of impacts (e.g. interactions and overlaps) and how the project deals with them. As research is still ongoing, this paper only gives a first impression of the order of magnitude for additional multiple impacts of energy efficiency improvements may have in Europe, where this is available to date. The paper is intended to stimulate discussion and receive feedback from the academic community on quantification approaches followed by the project.
Improvements in energy efficiency have numerous impacts additional to energy and greenhouse gas savings. This paper presents key findings and policy recommendations of the COMBI project ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe").
This project aimed at quantifying the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in 2030. It covered the most relevant technical energy efficiency improvement actions in buildings, transport and industry.
Quantified impacts include reduced air pollution (and its effects on human health, eco-systems), improved social welfare (health, productivity), saved biotic and abiotic resources, effects on the energy system and energy security, and the economy (employment, GDP, public budgets and energy/EU-ETS prices). The paper shows that a more ambitious energy efficiency policy in Europe would lead to substantial impacts: overall, in 2030 alone, monetized multiple impacts (MI) would amount to 61 bn Euros per year in 2030, i.e. corresponding to approx. 50% of energy cost savings (131 bn Euros).
Consequently, the conservative CBA approach of COMBI yields that including MI quantifications to energy efficiency impact assessments would increase the benefit side by at least 50-70%. As this analysis excludes numerous impacts that could either not be quantified or monetized or where any double-counting potential exists, actual benefits may be much larger.
Based on these findings, the paper formulates several recommendations for EU policy making:
(1) the inclusion of MI into the assessment of policy instruments and scenarios,
(2) the need of reliable MI quantifications for policy design and target setting,
(3) the use of MI for encouraging inter-departmental and cross-sectoral cooperation in policy making to pursue common goals, and
(4) the importance of MI evaluations for their communication and promotion to decision-makers, stakeholders, investors and the general public.
The core objective of Energy Efficiency Watch 3 (EEW3) is to establish a constant feedback loop on the implementation of European and national energy efficiency policies and thus enable both compliance monitoring and mutual learning on effective policy making across the EU. The project team applied a mixed-method approach to assess energy efficiency policy developments in EU Member States. It analysed progress of national policies by screening official documents, sought experts' knowledge via an EU-wide survey and has been creating new consultation platforms with a wide spectrum of stakeholders including parliamentarians, regions, cities and business stakeholders. Analysis of the National Energy Efficiency Action Plans (NEEAPs), the expert survey with input from over 1,100 experts on policy ambition and progress in each Member State, as well as 28 Country Reports have been central elements in EEW3. This paper will present the main conclusions and policy recommendations of EEW3. In doing so, it will first summarise the findings of the document analysis based on the 28 Country Reports, showing developments of energy efficiency policies since the second NEEAP in 2011 in a cross-country overview for six sectors. These findings are then contrasted with the experts' perspective on progress in energy efficiency policies in their countries as collected in the EEW survey. Moreover, ten case studies of good practice energy efficiency policies are shown, three of them will be presented in more detail. The paper ends with key policy conclusions for improving the effectiveness of European energy efficiency policies. A key finding is that policy implementation has improved a lot since 2011 but more is needed to achieve the EED Art. 7 and other targets.
There is an extensive potential for GHG emission reductions in the new EU member states and the EU accession countries by improving energy efficiency, investing in renewable energy supply and other measures, part of which could be tapped by JI. However, the EU Emissions Trading System (EU ETS) and especially the recently adopted "Linking Directive" is probably going to have a significant impact on this JI potential. Especially two provisions are important:
The baseline of a project has to be based on the acquis communautaire, the environmental regulations of which are substantially higher than the Accession Countries' existing ones. Projects, which directly or indirectly reduce emissions from installations falling within the scope of the EU ETS, can only generate certificates if an equal number of EU allowances are cancelled. JI is thus put into direct competition with the EU ETS. In this paper we analyse the impact of these provisions first in theory and then country by country for six Central and East European countries that recently acceded the EU or are candidates for accession. As a result, we give an overview of the potential and the limitations of JI as an instrument for achieving emission reductions in the selected Accession Countries and provide important overview information to policy makers.
Industrialized countries have committed to providing "new and additional" funding to developing countries for climate change mitigation and adaptation. However, lack of a common definition of "new and additional" undermines the climate process. This article aims to contribute to the discussion on the principle of additionality by assessing possible definitions. The article first contextualizes the guiding principles that led to the endorsement of "new and additional" finance within the history of international climate negotiations. Second, we survey definitions of "new and additional" put forward by industrialized countries as well as further proposed definitions put forward by scholars. Third, we assess the respective strengths and weaknesses of these definitions.
Our analysis shows that there is no singular formula that would resolve the problem of how to define additionality. Definitions that would be politically acceptable to developed countries are subject to gaming while definitions that are technically robust are politically difficult. We conclude that a combination of using innovative sources and defining specific future levels of development assistance ex ante may offer the best prospects for resolving the climate finance conundrum.
Many European city governments have voluntarily committed to ambitious CO2-emission reduction targets until 2020 and 2050. Supported by dedicated structures and networks (e.g. Covenant of Mayors), local governments have already developed, or are currently developing, ambitious climate action plans, all pursuing the aim of radical CO2-emission reduction in the long term.
Though, the development of climate action plans is only a first step, as the actual crucial and more challenging part its implementation. Besides financial investments also additional capacities, improved institutional structures and innovative strategies are necessary to successfully implement ambitious policies within existing national and regional framework conditions. There is often more competition than co-operation between cities. However, exchanging on common challenges in order to find new solutions provides potential for innovative ideas and new views on own structures. In particular, methods and formats for self-assessment and mutual learning can support cities' stakeholders to overcome their implementation gap in local energy and climate policies.
This paper will present results from the first phase of the three year project "CASCADE", which was initiated by 19 European cities in co-operation with EUROCITIES. Within the project, implementation challenges are being addressed in an intensive process of self-assessment and mutual learning. The methodological "backbone" of this process is a qualitative benchmarking framework in the thematic fields of "Renewable energy sources and distributed energy generation", "Energy efficient buildings and districts" and “Energy in urban transport”. Up to a certain degree, existing local climate policy benchmarks provide a common exchange platform, but mainly for the comparison between cities. The CASCADE benchmarking framework goes beyond competitive comparisons. As a qualitative criteria-based assessment procedure it identifies key challenges and factors for a successful implementation of established local climate policy plans. These factors have been developed from a qualitative survey including interviews and workshops with representatives of the participating cities.
Six cities serve as examples. Self-assessment reports were provided based on the CASCADE benchmarking framework focussing on the implementation status of their local climate policies. These reports were reevaluated by four or five project partners from different cities in a desk-review process. During subsequent four-days peer learning visits, the CASCADE benchmarking framework was used again as a tool for an in-depth assessment of the local climate and energy action plans and the local activities towards implementation of these strategic documents. Finally, the visitors drafted a feedback report with recommendations and improvements for the hosts.
The paper describes the methodology of the CASCADE benchmarking framework for integrated learning, its applicability for peer learning processes, as well as first experiences and results from the peer learning visits.
Energy efficiency activities are high on the current EU energy policy agenda. Key policy instruments like the Energy Efficiency Directive (EED), the Energy Performance of Buildings Directive (EPBD) and the Energy Labelling Directive are under revision.
In a project for the German government, we therefore analysed the effectiveness and consistency of existing sectoral policy packages anew, to open the discussion on which policy changes to the EU's energy efficiency policy packages are crucial to reach the targets.
This comprehensive review addressed the industrial, buildings, and transport sectors plus the overarching governance framework (targets and roadmaps, EED, energy taxation and EU ETS). For each of these, the first step was a gap analysis of the main deficits in the sectoral policy packages, against effective model packages.
At first glance, the combination of energy efficiency policies at EU level seems already quite comprehensive. However, their design and implementation often lack a consistent and ambitious approach to leverage their full potential.
To give some examples of the many shortcomings identified, the governance framework suffers from exceptions and the transport sector being only marginally considered in the EED; an outdated Energy Tax Directive has very low minimum rates and several exception clauses; there is a lack of commitment to implement energy management systems and investment projects in large companies; a clear EU-wide definition of nearly zero energy buildings (nZEB) is missing; and the labelling of energy-using products is still confusing for consumers. Subsequently, we elaborated comprehensive policy recommendations to increase the effectiveness of all these policies, and to bridge some gaps with new policies. A list of priorities was established to sort them by their relevance.