Refine
Has Fulltext
- yes (281) (remove)
Year of Publication
Document Type
- Peer-Reviewed Article (131)
- Report (77)
- Conference Object (38)
- Working Paper (16)
- Contribution to Periodical (11)
- Part of a Book (5)
- Book (2)
- Master Thesis (1)
Language
- English (281) (remove)
Division
- Zukünftige Energie- und Industriesysteme (281) (remove)
In order to limit global warming and fulfill their contributions to the Paris agreement, both Germany and Japan have set targets for climate neutrality towards the middle of the century. Reaching these goals will imply transformation of all sectors of society to avoid all fossil greenhouse gas emissions, heavy industry not the least. The focus of this study is the transformation of the petrochemical industry. This sector can become climate neutral but cannot be "decarbonized", as carbon is integral to the chemical structures of the products like polymers and solvents. Reaching climate neutrality thus means that the whole lifecycle of the petrochemical products has to be regarded. Another specific challenge is today's synergetic relation of this industry to fossil transport fuel production, which cannot be maintained in a climate neutral world.
The two countries interestingly share a similar industrial structure overall, and the chemical and petrochemical industry is one of the major industries in both countries. The countries' respective chemical industries are the third and fourth largest in the world in terms of sales, but at the same time, these industries represent just over 5% of the respective countries' greenhouse gas emissions. However, these scope 1 emissions of the chemical industry itself are far less relevant than the end-of-life emissions of their products, which belong to scope 3 and are thus not counted under the chemical industry in the country greenhouse gas balances. To mediate these emissions, there is a need to set the direction, draw out paths and investigate possible alternatives for how the petrochemical industry can be become climate neutral. In this report, the existing scenario analyses, energy strategies and roadmaps dealing with this issue in the two countries are compared, as well as the current state of their petrochemical industries. We highlight similarities, differences and identify possible areas of cooperation and exchange in order to find robust paths forward for the transformation of the petrochemical industries.
In light of Egypt's transition to a green economy, this report focuses on reducing greenhouse gas (GHG) emissions and increasing resource efficiency along three different value chains in which small and medium-sized enterprises (SMEs) play a crucial role. In order to support SMEs in Egypt to take advantage of implementing greening options along value chains, more detailed analyses are needed. Therefore, the aim of this study is to analyse three selected supply chains to identify greening opportunities for SMEs. Against this background, the project report is structured as follows: Chapter 2 introduces the background with an overview over the concept of green economy followed by Egypt's economy and its green economy. This is followed by a presentation of the value chains and an overview of the respective sectors. Chapter 3 describes the research approach, methods and data collection. The following chapters examine the three selected value chains cotton, sugar beet and refrigerators, including environmental hot spots, greening options as well as the experts' evaluation of those greening options. The report concludes with key recommendations in Chapter 7.
Direct air capture (DAC) combined with subsequent storage (DACCS) is discussed as one promising carbon dioxide removal option. The aim of this paper is to analyse and comparatively classify the resource consumption (land use, renewable energy and water) and costs of possible DAC implementation pathways for Germany. The paths are based on a selected, existing climate neutrality scenario that requires the removal of 20 Mt of carbon dioxide (CO2) per year by DACCS from 2045. The analysis focuses on the so-called "low-temperature" DAC process, which might be more advantageous for Germany than the "high-temperature" one. In four case studies, we examine potential sites in northern, central and southern Germany, thereby using the most suitable renewable energies for electricity and heat generation. We show that the deployment of DAC results in large-scale land use and high energy needs. The land use in the range of 167-353 km2 results mainly from the area required for renewable energy generation. The total electrical energy demand of 14.4 TWh per year, of which 46% is needed to operate heat pumps to supply the heat demand of the DAC process, corresponds to around 1.4% of Germany's envisaged electricity demand in 2045. 20 Mt of water are provided yearly, corresponding to 40% of the city of Cologne's water demand (1.1 million inhabitants). The capture of CO2 (DAC) incurs levelised costs of 125-138 EUR per tonne of CO2, whereby the provision of the required energy via photovoltaics in southern Germany represents the lowest value of the four case studies. This does not include the costs associated with balancing its volatility. Taking into account transporting the CO2 via pipeline to the port of Wilhelmshaven, followed by transporting and sequestering the CO2 in geological storage sites in the Norwegian North Sea (DACCS), the levelised costs increase to 161-176 EUR/tCO2. Due to the longer transport distances from southern and central Germany, a northern German site using wind turbines would be the most favourable.
A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy (RE) transition in MENA countries has been developed and applied to the country case of Morocco. It is designed to support the strategy development and governance of the energy transition and to serve as a guide for decision makers. Such a phase model could be shared widely as part of Morocco's engagement in international platforms of multilateral collaboration, such as the Energy Transition Council (chaired by the United Kingdom (UK) and managed by the British Embassy - Rabat).
The analysis shows that Morocco has fully embarked on the energy transition. According to the MENA phase model, Morocco can be classified as being in the second phase "System Integration of Renewables". Nevertheless, Morocco plans to considerably increase the use of natural gas in order to back up intermittent solar and wind energy sources. The diversification of energy sources and a diverse portfolio of storage options, including solar thermal power and hydrogen, can foster flexibility options. To this end, a roadmap for power-to-X (PtX) should be considered for a smooth transition of the Moroccan energy supply and demand system.
The expansion of local REs can significantly contribute to reducing Morocco's high fossil fuel imports that are causing a high fiscal burden. With this regard, energy security can be strengthened. Next to large-scale deployment, decentralisation of the energy system must be built to encourage an energy transition on all societal levels. The results of the analysis along the transition phase model towards 100% RE are intended to stimulate and support the discussion on Morocco's future energy system by providing an overarching guiding vision for energy transition and the development of appropriate policies.
A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy (RE) transition in the Middle East and North Africa (MENA) countries has been developed and applied to the country case of Jordan. It is designed to support the strategy development and to serve as a guide for decision-makers.
The analysis shows that Jordan has taken essential steps towards a RE transition. According to the MENA energy transition phase model, Jordan can be classified as being in a transitional stage between the first phase, "Take-Off Renewables", and the second phase, "System Integration". However, fossil fuels continue to play a dominant role in the Jordanian energy sector, and the fluctuating world market prices for fossil fuels impact the economy.
The expansion of domestically produced RE could significantly contribute to reducing Jordan's high imports of fossil fuels. This simultaneously increases energy security and reduces the trade deficit. To move towards a sustainable energy system, Jordan needs to embrace comprehensive flexibility measures. These include developing storage options, improving load management, upgrading the existing grid infrastructure, enhancing energy efficiency, exploring the electrification of end use sectors, and creating strong cooperation between stakeholders.
Reaching net-zero in the chemical industry : a study of roadmaps for industrial decarbonisation
(2024)
Striving to mitigate climate change, the European Union has adopted net-zero greenhouse gas emissions as a target for 2050. In this paper, European chemical industry roadmaps from the past six years are assessed and compared to uncover how the industry envisions its role in the transition to net-zero emissions. The roadmaps are assessed in terms of ambition level, technology and feedstock strategies, investment needs and costs, agency and dependency on other actors, as well as timeline and concretion. Although net-zero pathways are often drawn out in the roadmaps, some also choose to emphasize and argue for less ambitious pathways with emission reductions of only 40-60 %. The roadmaps vary widely in terms of the importance they assign to mechanical and chemical recycling, switching to biogenic carbon and carbon dioxide as feedstock, electrification and hydrogen, and carbon capture and storage. A commonality though, is that low-tech or near-term mitigation pathways such as demand reduction, reuse or material efficiency are seldom included. High investment needs are generally highlighted, as well as the need for policy to create enabling conditions, whereas the agency and responsibility of the chemical industry itself is downplayed. Our analysis highlights that the chemical industry does not yet have a strong and shared vision for pathways to net-zero emissions. We conclude that such a future vision would benefit from taking a whole value chain approach including demand-side options and consideration of scope 3 emissions.
Case study on the German discourse of industry decarbonisation : a discourse network analysis
(2023)
The adoption of the Paris Agreement in 2015 and the passing of the Climate Action Law in Germany in 2019 established the legal need for the basic material industry in Germany to decarbonise. For the industry sector, the target is sets at a 49-51% GHG reduction by 2030 compared to 1990. Even though the sector specific targets are likely to become obsolete, a Hydrogen Strategy, Industry Strategy and Climate Protection Contracts are currently being developed or elaborated on. These are to further ensure and enable the basic material industry in Germany to decarbonise. These developments are emphasising the relevance of studying the industry decarbonisation at the time of conducting this research.
As the institutionalisation of the industry decarbonisation is influenced by discourse, the analysis of the discourse is an important tool for studying the power effects produced by and built into the discourse. This is the first research aiming to provide a structured analysis of the discourse on industry decarbonisation in Germany. Drawing on discourse analysis and the Multilevel-Perspectives framework, this research investigated the power and dominance of storylines to influence the discourse of the industry transformation towards decarbonisation. In this research insights were obtained into the storylines used in this discourse, the actors who are part of this discourse, the frequency of storylines used and the percentage of actors making use of these storylines. Additionally, insights were generated into the discursive network and potential coalitions.
This research made use of the Discourse Network Analysis software in combination with Visone and Excel for data collection, analysis, and visualisation. Based on 117 documents of various categories from the years 2012 to 2023, the discourse on German industry decarbonisation is discovered to be dominated by storylines of mainly technological or economic nature. The general sentiment discovered by the different actors is positive with the storylines focusing on establishing the conditions for the industry to decarbonise and no resistance being communicated. The discourse is furthermore dominated by most storylines. 18 out of 27 storylines are being used by more than 56% of all actors. The high overlap in storyline indicates discursive homogeneity. The homogeneity is further indicated through the lack of emerging discourse coalitions and the therewith connected lack of struggles for discursive dominance. One coalition can be defined with some actors being deeper involved and some being less involved in the discourse.
As decisions on the transition path for Germany's industry to decarbonise are still to be taken the lack of discursive struggles has come to my surprise. In the discussion I reflect on how the positive sentiment, the discursive homogeneity and the great number of dominant storylines may come about.
The production of green hydrogen in Germany is more competitive than expected compared to imports. This is the key finding of a meta-analysis conducted by the Wuppertal Institute on behalf of the North Rhine-Westphalia Association for Renewable Energies (Landesverband Erneuerbare Energien NRW).
The hydrogen study focuses primarily on the year 2030 and beyond - and confirms the advantages of green hydrogen produced in Germany from domestic renewable energies, especially when the evaluation is viewed from a holistic system perspective.
There is a growing body of scientific evidence supporting sufficiency as an inevitable strategy for mitigating climate change. Despite this, sufficiency plays a minor role in existing climate and energy policies. Following previous work on the National Energy and Climate Plans of EU countries, we conduct a similar content analysis of the recommendations made by citizen assemblies on climate change mitigation in ten European countries and the EU, and compare the results of these studies. Citizen assemblies are representative mini-publics and enjoy a high level of legitimacy.
We identify a total of 860 mitigation policy recommendations in the citizen assemblies' documents, of which 332 (39 %) include sufficiency. Most of the sufficiency policies relate to the mobility sector, the least relate to the buildings sector. Regulatory instruments are the most often proposed means for achieving sufficiency, followed by fiscal and economic instruments. The average approval rate of sufficiency policies is high (93 %), with the highest rates for regulatory policies.
Compared to National Energy and Climate Plans, the citizen assembly recommendations include a significantly higher share of sufficiency policies (factor three to six) with a stronger focus on regulatory policies. Consequently, the recommendations can be interpreted as a call for a sufficiency turn and a regulatory turn in climate mitigation politics. These results suggest that the observed lack of sufficiency in climate policy making is not due to a lack of legitimacy, but rather reflects a reluctance to implement sufficiency policies, the constitution of the policy making process and competing interests.
To combat climate change, it is anticipated that in the coming years countries around the world will adopt more stringent policies to reduce greenhouse gas emissions and increase the use of clean energy sources. These policies will also affect the industry sector, which means that industrial production is likely to progressively shift from CO2-emitting fossil fuel sources to renewable energy sources. As a result, a region's renewable energy resources could become an increasingly important factor in determining where energy-intensive industries locate their production. We refer to this pull factor as the "renewables pull" effect. Renewables pull could lead to the relocation of some industrial production as a consequence of regional differences in the marginal cost of renewable energy sources. In this paper, we introduce the concept of renewables pull and explain why its importance is likely to increase in the future. Using the examples of direct reduced iron (DRI) and ammonia production, we find that the future costs of climate-neutral production of certain products is likely to vary considerably between regions with different renewable energy resources. However, we also identify the fact that many other factors in addition to energy costs determine the decisions that companies make in term of location, leaving room for further research to better understand the future relevance of renewables pull.
Green hydrogen and synthetic fuels are increasingly recognized as a key strategic element for the progress of the global energy transition. The Middle East and North Africa (MENA) region, with its large wind and solar potential, is well positioned to generate renewable energy at low cost for the production of green hydrogen and synthetic fuels, and is therefore considered as a potential future producer and exporter. Yet, while solar and wind energy potentials are essential, other factors are expected to play an equally important role for the development of green hydrogen and synthetic fuels (export) sectors. This includes, in particular, adequate industrial capacities and infrastructures. These preconditions vary from country to country, and while they have been often mentioned in the discussion on green hydrogen exports, they have only been examined to a limited extent. This paper employs a case study approach to assess the existing infrastructural and industrial conditions in Jordan, Morocco, and Oman for the development of a green hydrogen and downstream synthetic fuel (export) sector.
22 years are left until the German target for climate neutrality should be reached. For the industrial sector, this implies a fundamental change and an acceleration of emission reduction, as from 2000 to 2021 the sector has reduced its greenhouse gas (GHG) emissions by only 13% (ERK, 2022). For the large structures, plants and assets that are characteristic for the energy intensive industrial sectors, the timespan implies no room for delay. One sector facing particular challenges is the chemical industry. Here, fossil resources are used not only for energetic purposes but for feedstock as well, in the petrochemical industry in particular. The efforts made in the petrochemical sector thereby not only affects the sectors own emissions, but the chemicals value chain at large, including the management of end-of-life products. The dependency on energetic resources for material use also means that there is a particular connection from the chemical industry to the energy system at large, which also entails special consideration.
The chemical industry also has a particular relevance to the Antwerp-Rotterdam-Rhine-Ruhr-Area (ARRRA) which hosts several large petrochemical clusters in Germany as well as the Netherlands and Belgium, with complexly interlinked production chains. In reaching the climate targets, these regions especially face significant changes and may have the opportunity to position themselves as frontrunners for industrial transformation. That is, if a successful strategy can be found.
In the recent years, numerous scenario analyses and roadmaps have been released drawing out pathways for chemical industries to develop in line with national and international climate targets. This can entail mapping of technological options, important prerequisites, particular challenges as well as important opportunities and timeframes. This meta-analysis summarizes and compares the findings of some of the most recent previous works at the national, European and global level. As the goal is to investigate the various strategic options and development paths for Germany and the ARRRA, it has a particular focus on roadmaps for Germany, the Netherlands and Belgium. It takes a quantitative as well as qualitative approach, looking both at resource and production volumes, different emission reduction strategies relative importance, as well as policy recommendations and other important framework conditions. A particular focus is put on the use of non-fossil feedstocks to reduce emissions.
In the energy sector, few topics, if any, are more hyped than hydrogen. Countries develop hydrogen strategies to provide a perspective for hydrogen production and use in order to meet climate-neutrality goals. However, in this topical field the role of water is less accentuated. Hence, in this study, we seek to map the interrelations between the water and wastewater sector on the one hand and the hydrogen sector on the other hand, before reflecting upon our findings in a country case study. We chose the Hashemite Kingdom of Jordan because (i) hydrogen is politically discussed not least due to its high potentials for solar PV, and (ii) Jordan is water stressed - definitely a bad precondition for water-splitting electrolyzers. This research is based on a project called the German-Jordanian Water-Hydrogen-Dialogue (GJWHD), which started with comprehensive desk research mostly to map the intersectoral relations and to scope the situation in Jordan. Then, we carried out two expert workshops in Wuppertal, Germany, and Amman, Jordan, in order to further discuss the nexus by inviting a diverse set of stakeholders. The mapping exercise shows various options for hydrogen production and opportunities for planning hydrogen projects in water-scarce contexts such as Jordan.
Nigeria is Africa's top cement producer and could be on course to be one of the top producers globally. The goal of this study is to identify and critically examine the pathways available to Nigeria to meet its decarbonisation goals in the cement sector. Based on a literature review, the study assesses demand drivers and decarbonisation potentials for the sector. It then presents two different quantitative pathways for growth in production of cement by 2050, and three different pathways for decarbonisation of the sector. Using published data and a scenario analysis tool, the study calculates how the sector's emissions might evolve under each of these pathways. The results indicate that, in the most ambitious scenario, emissions from the sector can plateau by the late 2030s, resulting in an overall increase of 21% by 2050 (compared to 2015 levels). Achieving this scenario is necessary in order to put the sector on a path to net zero emissions beyond 2050. The scenario is driven by reductions in both energy-related and process emissions, as well as a small share of carbon capture and storage and demand management. A moderately ambitious scenario that relies mostly on savings on energy-related emissions results in an 84% increase in emissions by 2050. Finally, the Business-as-Usual scenario results in an almost tripling of emissions by 2050. The results indicate a strong potential for policies to drive improvements in energy efficiency and clinker-to-cement ratio. Critical areas of uncertainty within the assumptions include the production rates (including the evolution of the export market) and the fuel mix.
Transponder-based Aircraft Detection Lighting Systems (ADLS) are increasingly used in wind turbines to limit beacon operation times, reduce light emissions, and increase wind energy acceptance. The systems use digital technologies such as receivers of digital transponder signals, LTE/5G, and other information and communication technology. The use of ADLS will be mandatory in Germany both for new and existing wind turbines with a height of >100 m from 2023 (onshore) and 2024 (offshore), so a nationwide rollout is expected to start during 2022. To fully realize the benefits while avoiding risks and bottlenecks, a thorough and holistic understanding of the efforts required and the impacts caused along the life cycle of an ADLS is essential. Therefore, this study presents the first multi-aspect holistic evaluation of an ADLS. A framework for evaluating digital applications in the energy sector, previously developed by the authors, is refined and applied. The framework is based on multi-criteria analysis (MCA), life cycle assessment (LCA), and expert interviews. On an aggregated level, the MCA results show an overall positive impact from all stakeholders’ perspectives. Most positive impacts are found in the society and politics category, while most negative impacts are of technical nature. The LCA of the ADLS reveals a slightly negative impact, but this impact is negligible when compared to the total life cycle impact of the wind turbines of which the ADLS is a part. Besides the aggregated evaluation, detailed information on potential implementation risks, bottlenecks, and levers for life cycle improvement are presented. In particular, the worldwide scarcity of the required semiconductors, in combination with the general lack of technicians in Germany, lead to the authors’ recommendation for a limited prolongation of the planned rollout period. This period should be used by decision-makers to ensure the availability of technical components and installation capacities. A pooling of ADLS installations in larger regions could improve plannability for manufacturers and installers. Furthermore, an ADLS implementation in other countries could be supported by an early holistic evaluation using the presented framework.
Community-based approaches to natural resource management are being discussed and experienced as promising ways for pursuing ecological conservation and socio-economic development simultaneously. However, the multiplicity of levels, scales, objectives and actors that are involved in sustainability transformations tends to be challenging for such bottom-up approaches. Collaborative and polycentric governance schemes are proposed for dealing with those challenges. What has not been fully explored is how knowledge from local contexts of community-based initiatives can be diffused to influence practices on higher levels and/or in other local contexts. This study explores how theoretical advances in the diffusion of grassroots innovation can contribute to understanding and supporting the diffusion of knowledge and practices from community-based initiatives and proposes a transdisciplinary approach to diffusion. For that aim, we develop an analytical perspective on the diffusion of grassroots innovations that takes into consideration the multiplicity of actors, levels and scales, the different qualities/types of knowledge and practices, as well as their respective contributions. We focus on the multiplicity and situatedness of cognitive frames and conceptualize the diffusion of grassroots innovations as a transdisciplinary process. In this way three different diffusion pathways are derived in which the knowledge and practices of grassroots initiatives can be processed in order to promote their (re)interpretation and (re)application in situations and by actors that do not share the cognitive frame and the local context of the originating grassroots initiative. The application of the developed approach is illustrated through transdisciplinary research for the diffusion of sustainable family farming innovations in Colombia. This conceptualization accounts for the emergence of multiplicity as an outcome of diffusion by emphasizing difference as a core resource in building sustainable futures.
Sufficiency measures are potentially decisive for the decarbonisation of energy systems but rarely considered in energy policy and modelling. Just as efficiency and renewable energies, the diffusion of demand-side solutions to climate change also relies on policy-making. Our extensive literature review of European and national sufficiency policies fills a gap in existing databases. We present almost 300 policy instruments clustered into relevant categories and publish them as "Energy Sufficiency Policy Database". This paper provides a description of the data clustering, the set-up of the database and an analysis of the policy instruments. A key insight is that sufficiency policy includes much more than bans of products or information tools leaving the responsibility to individuals. It is a comprehensive instrument mix of all policy types, not only enabling sufficiency action, but also reducing currently existing barriers. A policy database can serve as a good starting point for policy recommendations and modelling, further research is needed on barriers and demand-reduction potentials of sufficiency policy instruments.
A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy (RE) transition in the Middle East and North Africa (MENA) countries has been developed and applied to ten countries: Algeria, Egypt, Iraq, Israel, Jordan, Lebanon, Morocco, Palestine, Tunisia, and Yemen. This report synthesises the results of these ten studies.
The analysis shows that the state of the energy sector in the MENA region varies from country to country, but some underlying trends are present in all countries. In the majority of countries, energy prices are subsidised, and energy markets are mostly not liberalised. The energy demand in all analysed countries is growing and most grid systems are poorly interconnected across borders. Still, the expansion of RE in the MENA region can benefit from significant global progress and cost reductions in RE technologies.
Reducing greenhouse gas (GHG) emissions is not the only key driver for energy transition. In fact, the main motives for transition are that RE can help to meet growing demand, reduce dependence on imports, increase energy security, and provide opportunities for economic development.
All countries studied have RE targets. While some countries are on track to meet these targets, others need to increase their efforts to expand renewable electricity generation in order to meet their goals. Strong progress has been made in countries with limited fossil energy resources, while in some countries that produce and export large amounts of fossil energy resources, the energy transition is progressing rather slowly.
A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy (RE) transition in MENA countries has been developed and applied to the country case of Yemen. It is designed to support the strategy development and governance of the energy transition and to serve as a guide for decision makers.
The transition towards REs is still at a quite early stage in Yemen. The military conflict has prevented the implementation of most of the planned large-scale renewable projects. The political instability, the high dependence on fossil fuels, and poor administrative performance are the most pressing concerns for Yemen's electricity sector. At an operational level, Yemen requires a total retrofit of the electricity infrastructure and needs to expand its overall capacity while improving its efficiencies.
Despite these challenges, rebuilding the energy system after the political turmoil and the subsequent violent conflicts could offer Yemen the capability to transition towards renewables. This will provide short-term and long-term opportunities and avoid stranded investments in fossil-fuel capacities.
The priority is to improve the framework conditions for RE in Yemen, starting with the development of a long-term strategy up to 2030 and beyond. Also, an appropriate and transparent legislation must be created. Furthermore, based on the legislation, clear regulations for REs must be introduced, and a realistic timeframe for expansion must be established in order to promote acceptance and market development on a large scale.
The results of the analysis along the transition phase model towards 100% RE are intended to stimulate and support the discussion on Yemen's future energy system by providing an over-arching guiding vision for the energy transition and the development of appropriate policies.
A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy (RE) transition in the Middle East and North Africa (MENA) countries has been developed and applied to the country case of Lebanon. It is designed to support the strategy development and governance of the energy transition and to serve as a guide for decision makers.
Lebanon's energy transition towards REs stands at a very early stage of the first transformation phase. Although abundant solar and wind energy potential does exist, the pathway towards a 100% renewables energy seems very challenging for Lebanon, as a consequence of highly unstable political conditions. The most pressing concern for Lebanon's electricity sector is combating the country's fiscal imbalance, while providing secure and reliable electricity supply. At the operational level, Lebanon's grid network requires significant investments to rebuild, retrofit, and expand the overall capacity and energy efficiency improvements.
The need to strengthen the energy system after the political turmoil of the civil war is likely to offer several long-term opportunities, such as developing the economy, reducing environmental pollution, and increasing the energy security. In order to move forward into the first phase, Lebanon needs to improve the framework conditions for REs and implement its visions. It needs to support the market development in a realistic timeframe, where structural reforms represent the highest priority.
The results of the analysis along the transition phase model towards 100% renewables energy are intended to stimulate and support the discussion on Lebanon's future energy system by providing an overarching guiding vision for the energy transition and the development of appropriate policies.
Innovative digital technologies open up new opportun ities for small and medium-sized enterprises (SMEs) to improve energy efficiency and energy management behavior. The question is: How far will SMEs be capable of profiting from the benefits of these new technologies? Using technology screening, this study identifies smart metering and mobile energy monitoring as digital technologies best addressing SMEs' specific demands. In addition, potentials and limitations of the technologies are investigated in two qualitative in-depth field trials. Barriers to adopting digitally enabled energy management practices are examined. The results indicate that visualising energy data enables SMEs to pursue new energy management practices for reducing energy consumption and costs (such as peak load analysis). SMEs need extensive guidance to identify and pursue these strategies. In conclusion, an exploratory adoption model for digitally enabled energy management practices is developed. Hypotheses for future experimental studies and policy implications are derived.
The EU aims to become the first climate neutral continent. To achieve this goal, the industry sector needs to reduce its GHG emissions to net zero or at least close to net zero. This is a particularly challenging task due to the high energy demand especially of primary materials production and the little potential to reduce this energy intensity when switching to other production processes based on electricity or hydrogen. In order to identify robust strategies for achieving a net-zero-compatible industry sector, the paper at hand analyses the transformation of the industry sector as described by a number of recent climate neutrality scenarios for Germany. Apart from overall industry, a focus is set on the sectors of steel, chemicals and cement. The analysed scenarios show very deep GHG emission reductions in industry and they appear to be techno-economically feasible by the mid of the century, without relying on offsets or on shifts from domestic production to imports. The scenarios agree on a suite of core strategies to achieve this, such as direct and indirect electrification, energy efficiency and recycling as well as new technological routes in steel making and cement. The scenarios differ, however, regarding the future mix of electricity, hydrogen and biomass and regarding the future relevance of domestic production of basic chemicals.
The war in Ukraine is changing the political landscape at breakneck speed. How should politics and society react to high energy prices and a precarious dependence on fossil fuels imports? Can modern societies get by with much less energy? Energy sufficiency can play an important role in answering these questions. The contributions in this Special topic explore sufficiency as an interdisciplinary research topic for energy modeling, scenarios, and policy.
As the worldwide remaining carbon budget decreases rapidly, countries across the globe are searching for solutions to limit greenhouse gas emissions. As the production and use of coal is among the most carbon-intensive processes, it is foreseeable that coal regions will be particularly affected by the consequences of a transformation towards a climate-neutral economy and energy system.
Challenges arise in the area of energy production, environmental protection, but also for economic and social aspects in the transforming regions - often coined with the term "Just Transition". For the decision makers in coal regions, there is an urgent need for support tools that help to kick off measures to diversify the local economies while at the same time supporting the local workers and communities.
The Wuppertal Institute aims to support coal regions worldwide by developing a Just Transition Toolbox, which illustrates the challenges and opportunities of a sustainable transition for a global audience. It comprises information about strategy development, sets recommendations for governance structures, fostering sustainable employment, highlights technology options and sheds light on the environmental rehabilitation and repurposing of coal-related sites and infrastructure. The toolbox builds on the work of the Wuppertal Institute for the EU Initiative for Coal Regions in Transition and takes into account country-specific findings from the SPIPA-partner countries India, Indonesia, South Africa, Japan, South Korea, Canada and the USA. The acronym SPIPA is short for "Strategic Partnerships for the Implementation of the Paris Agreement" an EU-BMU programme co-financed by the GIZ.
A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy (RE) transition in the Middle East and North Africa (MENA) countries has been developed and applied to the country case of Tunisia. It is designed to support the strategy development and governance of the energy transition and to serve as a guide for decision makers.
The analysis shows that Tunisia has already taken important steps towards a RE transition. According to the MENA phase model, Tunisia can be classified as being in the "Take-Off Renewables" phase. Nevertheless, natural gas still plays the dominant role in Tunisia's highly subsidised electricity generation. In addition to the elevated political uncertainty, there are numerous structural, political, social, and economic challenges within the energy sector that hinder progress in the transition to REs.
Strong support at all levels is needed to promote the breakthrough of RE. This includes more detailed long-term planning and improving the regulatory framework, as well as reducing offtaker risks to improve the bankability of RE projects in order to attract private investment. Furthermore, institutional buy-in needs to be increased and the engagement of key non-state stakeholders must be strengthened.
In light of the growing domestic energy demand and with the on-going global decarbonisation efforts in favour of sustainable fuels, Tunisia would be well advised to embark on a sustainable energy path sooner rather than later to seize economic opportunities that can arise from RE development.
By applying a phase model for the renewables-based energy transition in the MENA countries to Israel, the study provides a guiding vision to support the strategy development and steering of the energy transition process.
The transition towards a renewable-based energy system can reduce import dependencies and increase the energy security in Israel.
Key issues that need to be tackled in order to advance the energy transition in Israel are the expansion of flexibility options, discussion on the long-term role of natural gas, increasing participation and awareness, and exploring the future role of power-to-X in the energy system.
Technological breakthroughs and policy measures targeting energy efficiency and clean energy alone will not suffice to deliver Paris Agreement-compliant greenhouse gas emissions trajectories in the next decades. Strong cases have recently been made for acknowledging the decarbonisation potential lying in transforming linear economic models into closed-loop industrial ecosystems and in shifting lifestyle patterns towards this direction. This perspective highlights the research capacity needed to inform on the role and potential of the circular economy for climate change mitigation and to enhance the scientific capabilities to quantitatively explore their synergies and trade-offs. This begins with establishing conceptual and methodological bridges amongst the relevant and currently fragmented research communities, thereby allowing an interdisciplinary integration and assessment of circularity, decarbonisation, and sustainable development. Following similar calls for science in support of climate action, a transdisciplinary scientific agenda is needed to co-create the goals and scientific processes underpinning the transition pathways towards a circular, net-zero economy with representatives from policy, industry, and civil society. Here, it is argued that such integration of disciplines, methods, and communities can then lead to new and/or structurally enhanced quantitative systems models that better represent critical industrial value chains, consumption patterns, and mitigation technologies. This will be a crucial advancement towards assessing the material implications of, and the contribution of enhanced circularity performance to, mitigation pathways that are compatible with the temperature goals of the Paris Agreement and the transition to a circular economy.
Analysis of the historical structural change in the German hard coal mining Ruhr area (case study)
(2022)
This case study examined the structural change in the Ruhr area caused by the low international competitiveness of German hard coal mining over the period from the late 1950s to 2015. It analysed the structural change process and the structural policies implemented as a reaction to this process with the objective to make this knowledge available for future structural change processes in other (coal) regions by deploying various qualitative and quantitative methods of empirical social and economic research. A discourse analysis helped to recognise who supported which structural policy approaches and why - and thus gives indications of the possible relevance of experiences for other regions.
This case study examined the structural change in Lusatia caused by the system change from a centrally planned economy to a market economy in the period 1990-2015. It analysed the structural change process and the structural policies implemented as a reaction to this process with the objective to make this knowledge available for future structural change processes in other (coal) regions by deploying various qualitative and quantitative methods of empirical social and economic research. A discourse analysis helped to recognise who supported which structural policy approaches and why - and thus gives indications of the possible relevance of experiences for other regions.
Effective policies to mitigate climate change need to be accompanied by a socially just transition. Based on experiences of past and ongoing transition policies in coal regions in Europe and with indications to the specificity of framework conditions and challenges and to the potential effectiveness and transferability of approaches, this paper presents lessons learnt which can be inspirational for similar transitions in other coal regions and for transitions in other sectors.
The idea for the Green Recovery Tracker was born in spring 2020 when governments started making announcements on economic Corona recovery measures. From a climate and resilience perspective it is key that those recovery packages, investments and subsidies are in line with long-term climate and sustainability targets. Thus, recovery packages should not only boost the economy in the short-term, but also strike the path to a just transition towards climate neutrality.
Against this background, Wuppertal Institute and E3G have launched the Green Recovery Tracker project in late summer 2020 to shed light on the following questions: What can be considered an effective green recovery? What are good examples, which can be used as an inspiration for recovery programs aiming to support sustainable development? Where do the individual Member States stand with respect to aligning their recovery activities with the climate policy agenda?
In this report, you will find our Methodology as well our Policy Briefing highlighting our key takeaways of our country and sectoral analyses. It further includes a section on "What can we learn from our experience with the Green Recovery Tracker?". The briefing concludes with a "Guidance for future funding programs and achieving climate targets overall".
With the move to a hydrogen-based primary steel production envisioned for the near future in Europe, existing regional industrial clusters loose major assets. Such a restructuring of industries may result in a new geographical distribution of the steel industry and also to another quality of vertical integration at sites. Both implications could turn out as drivers or barriers to invest in new technologies and are thus important in respect to vertical integration of sites and to regional policy. This paper describes an approach to model production stock invest for the steel industries in North-Western Europe. Current spatial structures are reproduced with capacity, technical and energy efficiency data on the level of single facilities like blast furnaces. With the model developed both investments in specific technologies and at specific production sites can be modelled. The model is used to simulate different possible future scenarios. The case with a clear move to hydrogen-based production is compared to a reference scenario without technological shift. The scenarios show that existing trends like movement of production to the coast may be accelerated by the new technology but that sites in the hinterland can also adapt to a hydrogen economy. Possible effects of business cycles or a circular economy on regional value chains are explored with a Monte-Carlo analysis.
Model-based scenario analyses of future energy systems often come to deviating results and conclusions when different models are used. This may be caused by heterogeneous input data and by inherent differences in model formulations. The representation of technologies for the conversion, storage, use, and transport of energy is usually stylized in comprehensive system models in order to limit the size of the mathematical problem, and may substantially differ between models. This paper presents a systematic comparison of nine power sector models with sector coupling. We analyze the impact of differences in the representation of technologies, optimization approaches, and further model features on model outcomes. The comparison uses fully harmonized input data and highly simplified system configurations to isolate and quantify model-specific effects. We identify structural differences in terms of the optimization approach between the models. Furthermore, we find substantial differences in technology modeling primarily for battery electric vehicles, reservoir hydro power, power transmission, and demand response. These depend largely on the specific focus of the models. In model analyses where these technologies are a relevant factor, it is therefore important to be aware of potential effects of the chosen modeling approach. For the detailed analysis of the effect of individual differences in technology modeling and model features, the chosen approach of highly simplified test cases is suitable, as it allows to isolate the effects of model-specific differences on results. However, it strongly limits the model's degrees of freedom, which reduces its suitability for the evaluation of fundamentally different modeling approaches.
Although smart energy technologies (SETs) can fulfill multiple tasks in increasingly decarbonized and digitalized energy systems, market diffusion is still limited. This study investigates which beliefs influence consumers' intention to adopt two smart-energy offerings, whether the rapid growth of the smart home market will now drive SET adoption, and if consumer-driven diffusion will lead to sustainability potentials being realized. Building on UTAUT2, a new theoretical model is proposed, and a consumer acceptance survey was conducted in Germany (n = 700). Results indicate that a growing smart home market will not increase SET adoption and that "adjustable green defaults" should be introduced.
This report was prepared by the Wuppertal Institute in cooperation with the German Economic Institute as part of the SCI4climate.NRW project. The report aims to shed light on the possible phenomenon that the availability and costs of "green" energy sources may become a relevant location factor for basic materials produced in a climate-neutral manner in the future.
For this purpose, we introduce the term "Renewables Pull". We define Renewables Pull as the initially hypothetical phenomenon of a shift of industrial production from one region to another as a result of different marginal costs of renewable energies (or of secondary energy sources or feedstocks based on renewable energies).
Shifts in industrial production in the sense of Renewables Pull can in principle be caused by differences in the stringency of climate policies in different countries, as in the case of Carbon Leakage. Unlike Carbon Leakage, however, Renewables Pull can also occur if similarly ambitious climate policies are implemented in different countries. This is because Renewables Pull is primarily determined by differences in the costs and availability of renewable energies. In addition, Renewables Pull can also be triggered by cost reductions of renewable energies and by changing preferences on the demand side towards climate-friendly products. Another important difference to Carbon Leakage is that the Renewables Pull effect does not necessarily counteract climate policy.
Similar to Carbon Leakage, it is to be expected that Renewables Pull could become relevant primarily for very energy-intensive products in basic materials industries. In these sectors (e.g. in the steel or chemical industry), there is also the possibility that relocations of specific energy-intensive parts of the production process could trigger domino effects. As a result, large parts of the value chains previously existing in a country or region could also be subjected to an (indirect) Renewables Pull effect.
For the federal state of NRW, in which the basic materials industry plays an important role, the possible emergence of Renewables Pull is associated with significant challenges as climate policy in Germany, the EU and also worldwide is expected to become more ambitious in the future.
This report aims to enable and initiate a deeper analysis of the potential future developments and challenges associated with the Renewables Pull effect. Thus, in the final chapter of the report, several research questions are formulated that can be answered in the further course of the SCI4climate.NRW project as well as in other research projects.
To limit global warming, the use of carbon capture and storage technologies (CCS) is considered to be of major importance. In addition to the technical-economic, ecological and political aspects, the question of social acceptance is a decisive factor for the implementation of such low-carbon technologies. This study is the first literature review addressing the acceptance of industrial CCS (iCCS). In contrast to electricity generation, the technical options for large-scale reduction of CO2 emissions in the energy-intensive industry sector are not sufficient to achieve the targeted GHG neutrality in the industrial sector without the use of CCS. Therefore, it will be crucial to determine which factors influence the acceptance of iCCS and how these findings can be used for policy and industry decision-making processes. The results show that there has been limited research on the acceptance of iCCS. In addition, the study highlights some important differences between the acceptance of iCCS and CCS. Due to the technical diversity of future iCCS applications, future acceptance research must be able to better address the complexity of the research subject.
In Argentina, renewable energies are promoted as a way of decarbonising the electricity mix and providing reliable energy services. The national goal is to generate 20% of electricity from renewable sources by 2025. However, despite significant natural potential, solar photovoltaic still represents only a small share of Argentina's total electricity generation. Although this picture may look bleak, a wide range of market segments relating to decentralised photovoltaic generation in Argentina have developed. The general objective of this study is to examine the dynamics that currently enable or constrain the diffusion of distributed photovoltaic systems in Argentina. By applying the Technical Innovation System (TIS) approach, the aim is to understand which functions of the system are strong/weak and how these are influenced by endogenous/exogenous system strengths and weaknesses. To that end, a mixed method research strategy is applied. The exploratory sequential research design allows first to explore system strengths and weaknesses based on qualitative approaches, and then to further analyse the contextual embeddedness and the level of importance of the identified variables using quantitative survey instruments. Thereby, this study provides an important analytical method that contributes to a more nuanced understanding of the interdependencies of the TIS. The empirical results indicate that system weaknesses are shaped to a large extent by the overall contextual dynamics - such as political instability, energy subsidies and high inflation rates. System strengths relate to both the TIS itself (particularly knowledge development through pilot projects and market formation through provincial and national support programmes), to contextual relationships (linked to the availability of educational institutions that enable the rapid diffusion of knowledge) and to the importance of rural areas as protected spaces for the application of photovoltaic systems. Consequently, the study highlights the challenges to overcome for the broader diffusion of distributed photovoltaic generation.
A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy transition in MENA countries has been developed and applied to the country case of Egypt. It is designed to support the strategy development and governance of the energy transition and to serve as a guide for decision makers.
Egypt, with its abundant solar and wind energy potential, has excellent preconditions to embark on the pathway towards a 100% renewable energy system. The country has successfully taken its first steps in this direction by attracting international finance and implementing several large-scale solar and wind projects. Yet, while Egypt has made significant progress, increased efforts are still required if the country aims to proceed towards a fully renewables-based system. The stronger system integration of renewable energies requires, for example, an alignment of regulations for the electricity, mobility and heat sectors. In this context, Egypt would be well advised to develop and implement an overall strategy for the energy transition that includes not only electricity generation but all sectors.
By placing a stronger focus on renewable energy, also to decarbonise the industrial sector, Egypt, as Africa's second most industrialised country, could seize the opportunity for economic development within a decarbonising global economy. The results of the analysis along the transition phase model towards 100% renewable energy are intended to stimulate and support the discussion on Egypt's future energy system by providing an overarching guiding vision for the energy transition and the development of appropriate policies.
A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy transition in MENA countries has been developed and applied to the country case of Iraq. It is designed to support the strategy development and governance of the energy transition and to serve as a guide for decision makers.
The transition towards renewable energies is still at a very early stage in Iraq. Despite the drop in renewable technology costs over the last decade and the increasing deployment of renewables in the MENA region, the pathway towards renewable energies seems to be challenging for Iraq. This is attributable to the country's political instability and the dominant economic role played by the fossil fuel sector. The most pressing concern for Iraq's electricity sector is the need to secure a constant electricity supply. At operational level, Iraq's electricity infrastructure requires significant investment to rebuilt, retro-fit and expand its overall capacity and to improve efficiencies.
Yet, the need to rebuild the energy system after the war and the subsequent violent conflicts could offer an opportunity for a transition towards renewables that would benefit Iraq in the short term and also provide a long-term economic development perspective. To take advantage of this opportunity, Iraq needs to improve the framework conditions for renewable energies and raise awareness about the benefits it offers. Renewable energy regulations need to be introduced, market development supported, a realistic timeframe for the transition process established and an appropriate and reliable legal framework developed. The results of the analysis along the transition phase model towards 100% renewables are intended to stimulate and support the discussion about Iraq's future energy system by providing an overarching guiding vision for the energy transition and the development of appropriate policy strategies.
Direct Air Capture (DAC) is increasingly being discussed as a possibility to limit climate change. In this study, a possible rollout of the DAC technology at German coastal areas is analysed based on an existing climate neutrality scenario. For the year 2045 the resulting costs as well as land, water and energy consumption are examined. It is concluded that a realization of the DAC technology in Germany might be possible from a technical point of view. However, there is a high demand for land and energy. Since a rollout is needed to start in 20 years at the latest, the required discussion and evaluation should be initiated as quickly as possible.
The energy sector today accounts for about 10% to 15% of global freshwater withdrawal. Most water in the energy sector is used for generating electricity, especially for cooling processes in thermal power plants. At the same time the demand for electricity is expected to increase significantly due to population growth and economic development in emerging and developing economies. Growing demand is also driven by electrification strategies pursued by industrialized countries to decarbonize their economies. With the global demand for electricity expected to increase significantly in the coming decades also the water demand in the power sector is expected to rise. However, due to the on-going global energy transition, the future structure of the power supply - and hence future water demand for power generation - is subject to high levels of uncertainty because the volume of water required for electricity generation varies significantly depending on both the generation technology and cooling system. In light of these challenges the objective of this analysis is to provide more systematic and robust answers in terms of the impacts of different decarbonization strategies in the electricity sector on water demand at global and regional level. The focus is on operational water use for electricity generation.
Especially in the arid areas of the Middle East and North Africa (MENA), water availability plays an important role in the expansion planning of industrial-scale solar power plants. Although power plants may account for only a very small portion of local water demand, competition for water with other sectors is expected to increase when water resources are insufficient for meeting local needs. This can lead to conflicts between different users (such as communities, farmers, tourism, businesses and utilities). Despite the increasing attention on the water-energy nexus, comprehensive studies analysing the interdependencies and potential conflicts between energy and water at the local level are absent.
To examine the linkages between water resources and energy technologies at the local level, this case study was selected because Morocco is one of the countries most affected by water scarcity and, at the same time, it is also one of the most promising countries in North Africa for the development of renewable energies and offers excellent conditions for solar and wind power plants. Nevertheless, the country's electricity system is still largely based on conventional energy sources, and the country is more than 95% dependent on energy imports. To strengthen the country's energy security and reduce the financial burden associated with energy imports, Morocco is pursuing an ambitious renewable energy expansion strategy: by 2020, around 42% of the national electricity demand should be met by renewable energies. In view of Morocco's ambitious plans, it is particularly important to identify the potential conflicts and synergies resulting from the expansion of renewable energies in relation to the water sector.
The unprecedented challenge of reaching carbon neutrality before mid-century and a large share of it within 2030 in order to keep under the 1.5 or 2 °C carbon budgets, requires broad and deep changes in production and consumption patterns which, together with a shift to renewables and reinforced efficiency, need to be addressed through energy sufficiency. However, inadequate representations and obstacles to characterising and identifying sufficiency potentials often lead to an underrepresentation of sufficiency in models, scenarios and policies.
One way to tackle this issue is to work on the development of sufficiency assumptions at a concrete level where various implications such as social consequences, environmental co-benefits, conditions for implementation can be discussed. This approach has been developed as the backbone of a collaborative project, gathering partners in 20 European countries at present, aiming for the integration of harmonised national scenarios into an ambitious net-zero European vision.
The approach combines a qualitative discussion on the role of energy sufficiency in a "systemic" merit order for global sustainability, and a quantitative discussion of the level of sufficiency to be set to contribute to meeting 100 % renewables supply and net-zero emissions goals by 2050 at the latest. The latter is based on the use of a dashboard, which serves as a common descriptive framework for all national scenario trajectories and their comparison, with a view to harmonising and strengthening them through an iterative process.
A set of key sufficiency-related indicators have been selected to be included in the dashboard, while various interrelated infrastructural, economic, environmental, social or legal factors or drivers have been identified and mapped. This paves the way for strengthening assumptions through the elaboration of "sufficiency corridors" defining a convergent, acceptable and sustainable level of energy services in Europe. The process will eventually inform the potential for sufficiency policies through a better identification of leverages, impacts and co-benefits.
On the pathway to climate neutrality, EU member states are obliged to submit national energy and climate plans (NECPs) with planned policies and measures for decarbonization until 2030 and long-term strategies (LTSs) for further decarbonization until 2050. We analysed the 27 NECPs and 15 LTSs submitted by October 2020 using an interrater method. This paper focuses on energy sufficiency policies and measures in the transport sector.
We found a total of 236 sufficiency policy measures with more than half of them (53 %) in the transport/mobility sector. Additionally, we found 41 measures that address two or more sectors (cross-sectoral measures). From the explicit sufficiency measures within the transport sector, 82 % aim at modal shift. A reduction of transport volumes is much less addressed. Countries plan to use mainly fiscal and economic instruments. Those are in many cases investments in infrastructure of low-carbon transport modes and taxation instruments. Plans on decarbonisation measures are also frequently mentioned. The majority of cross-sectoral measures are carbon taxes or tax reforms, also economic instruments.
On the one hand it is encouraging that Member States strongly emphasize the transport sector in their NECPs and LTSs - at least quantitatively and concerning sufficiency measures - because this sector has been the worst-performing in climate mitigation so far. On the other hand, the measures described seem not sufficient to reach ambitious climate targets, and we doubt that the presented set of policy instruments will get the transport sector on track to mitigate greenhouse gas emissions in the necessary extent.
A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy transition in MENA countries has been developed and applied to the country case of Algeria. It is designed to support the strategy development and governance of the energy transition and to serve as a guide for decision makers.
The analysis shows that Algeria has already taken first steps towards a renewable energy transition. According to the MENA phase model, Algeria can be classified as entering the "Take-Off Renewables" phase. Nevertheless, fossil fuels still play a dominant role in the Algerian energy sector and in the economy as a whole. To support the renewables take-off, strong support is therefore needed at all levels. Only then can the necessary framework conditions be created to encourage participation and to attract investment from the private sector. To this end, a long-term energy strategy should to be developed that takes into account the renewable energy potential to support an efficient transformation of the Algerian energy supply and enables a smooth transition.
The development of digital technologies is accelerating, enabling increasingly profound changes in increasingly short time periods. The changes affect almost all areas of the economy as well as society. The energy sector has already seen some effects of digitalization, but more drastic changes are expected in the next decades. Besides the very positive impacts on costs, system stability, and environmental effects, potential obstacles and risks need to be addressed to ensure that advantages can be exploited while adverse effects are avoided. A good understanding of available and future digital applications from different stakeholders' perspectives is necessary. This study proposes a framework for the holistic evaluation of digital applications in the energy sector. The framework consists of a combination of well-established methods, namely the multi-criteria analysis (MCA), the life cycle assessment (LCA), and expert interviews. The objective is to create transparency on benefits, obstacles, and risks as a basis for societal and political discussions and to supply the necessary information for the sustainable development and implementation of digital applications. The novelty of the proposed framework is the specific combination of the three methods and its setup to enable sound applicability to the wide variety of digital applications in the energy sector. The framework is tested subsequently on the example of the German smart meter roll-out. The results reveal that, on the one hand, the smart meter roll-out clearly offers the potential to increase the system stability and decrease the carbon emission intensity of the energy system. Therefore, the overall evaluation from an environmental perspective is positive. However, on the other hand, close attention needs to be paid to the required implementation and operational effort, the IT (information technology) and data security, the added value for the user, the social acceptance, and the realization of energy savings. Therefore, the energy utility perspective in particular results in an overall negative evaluation. Several areas with a need for action are identified. Overall, the proposed framework proves to be suitable for the holistic evaluation of this digital application.
The target of zero emissions sets a new standard for industry and industrial policy. Industrial policy in the twenty-first century must aim to achieve zero emissions in the energy and emissions intensive industries. Sectors such as steel, cement, and chemicals have so far largely been sheltered from the effects of climate policy. A major shift is needed, from contemporary industrial policy that mainly protects industry to policy strategies that transform the industry. For this purpose, we draw on a wide range of literatures including engineering, economics, policy, governance, and innovation studies to propose a comprehensive industrial policy framework. The policy framework relies on six pillars: directionality, knowledge creation and innovation, creating and reshaping markets, building capacity for governance and change, international coherence, and sensitivity to socio-economic implications of phase-outs. Complementary solutions relying on technological, organizational, and behavioural change must be pursued in parallel and throughout whole value chains. Current policy is limited to supporting mainly some options, e.g. energy efficiency and recycling, with some regions also adopting carbon pricing, although most often exempting the energy and emissions intensive industries. An extended range of options, such as demand management, materials efficiency, and electrification, must also be pursued to reach zero emissions. New policy research and evaluation approaches are needed to support and assess progress as these industries have hitherto largely been overlooked in domestic climate policy as well as international negotiations.
Energy sufficiency is one of the three energy sustainability strategies, next to energy efficiency and renewable energies. We analyse to what extent European governments follow this strategy, by conducting a systematic document analysis of all available European National Energy and Climate Plans (NECPs) and Long-Term Strategies (LTSs). We collect and categorise a total of 230 sufficiency-related policy measures, finding large differences between countries. We find most sufficiency policies in the transport sector, when classifying also modal shift policies to change the service quality of transport as sufficiency policies. Types of sufficiency policy instruments vary considerably from sector to sector, for instance the focus on financial incentives and fiscal instruments in the mobility sector, information in the building sector, and financial incentive/tax instruments in cross-sectoral application. Regulatory instruments currently play a minor role for sufficiency policy in the national energy and climate plans of EU member states. Similar to energy efficiency in recent decades, sufficiency still largely referred to as micro-level individual behaviour change or necessary exogenous trends that will need to take place. It is not treated yet as a genuine field of policy action to provide the necessary framework for enabling societal change.
The basic materials industries are a cornerstone of Europe's economic prosperity, increasing gross value added and providing around 2 million high-quality jobs. But they are also a major source of greenhouse gas emissions. Despite efficiency improvements, emissions from these industries were mostly constant for several years prior to the Covid-19 crisis and today account for 20 per cent of the EU's total greenhouse gas emissions.
A central question is therefore: How can the basic material industries in the EU become climate-neutral by 2050 while maintaining a strong position in a highly competitive global market? And how can these industries help the EU reach the higher 2030 climate target - a reduction of greenhouse gas emissions of at least 55 per cent relative to 1990 levels?
In the EU policy debate on the European Green Deal, many suppose that the basic materials industries can do little to achieve deep cuts in emissions by 2030. Beyond improvements to the efficiency of existing technologies, they assume that no further innovations will be feasible within that period. This study takes a different view. It shows that a more ambitious approach involving the early implementation of key low-carbon technologies and a Clean Industry Package is not just possible, but in fact necessary to safeguard global competitiveness.