Refine
Year of Publication
Document Type
- Report (10)
- Peer-Reviewed Article (8)
- Conference Object (5)
- Part of a Book (3)
- Book (1)
- Master Thesis (1)
- Working Paper (1)
Language
- English (29) (remove)
The current utilisation of natural resources in Germany and Europe is not sustainable, as inter alia stated by the German government as well as by the European Commission. At the same time, increased resource efficiency could lead to various environmental but also economic benefits. This brief study commissioned by Changing Markets presents developments in the field of resource efficiency policies, analyses the status quo of resource consumption with a special focus on fast moving consumer goods and describes potential effects of resource conservations.
The availability of life cycle inventories is one of the biggest challenges for life cycle wide environmental assessment. There are several life cycle assessment (LCA) databases providing inventory data as well as resource and emission profiles of processes for impact assessment methods like ReCiPe or IMPACT 2002+. But the use of these LCA databases for input oriented environmental assessment is very limited as they cover only a part of all relevant input flows. The paper describes current challenges when calculating the input oriented Material Input per Service Unit (MIPS) indicators based on LCA inventory data from the Ecoinvent database. Propositions are made how to address these challenges. As a conclusion, further need of research to reach a full compatibility of LCA databases and the MIPS concept is pointed out.
Overviewing the European carbon (C), greenhouse gas (GHG), and non-GHG fluxes, gross primary productivity (GPP) is about 9.3 Pg yr-1, and fossil fuel imports are 1.6 Pg yr-1. GPP is about 1.25% of solar radiation, containing about 360 × 1018 J energy - five times the energy content of annual fossil fuel use. Net primary production (NPP) is 50%, terrestrial net biome productivity, NBP, 3%, and the net GHG balance, NGB, 0.3% of GPP. Human harvest uses 20% of NPP or 10% of GPP, or alternatively 1‰ of solar radiation after accounting for the inherent cost of agriculture and forestry, for production of pesticides and fertilizer, the return of organic fertilizer, and for the C equivalent cost of GHG emissions. C equivalents are defined on a global warming potential with a 100-year time horizon. The equivalent of about 2.4% of the mineral fertilizer input is emitted as N2O. Agricultural emissions to the atmosphere are about 40% of total methane, 60% of total NO-N, 70% of total N2O-N, and 95% of total NH3-N emissions of Europe. European soils are a net C sink (114 Tg yr−1), but considering the emissions of GHGs, soils are a source of about 26 Tg CO2 C-equivalent yr-1. Forest, grassland and sediment C sinks are offset by GHG emissions from croplands, peatlands and inland waters. Non-GHGs (NH3, NOx) interact significantly with the GHG and the C cycle through ammonium nitrate aerosols and dry deposition. Wet deposition of nitrogen (N) supports about 50% of forest timber growth. Land use change is regionally important. The absolute flux values total about 50 Tg C yr-1. Nevertheless, for the European trace-gas balance, land-use intensity is more important than land-use change. This study shows that emissions of GHGs and non-GHGs significantly distort the C cycle and eliminate apparent C sinks.
The paper describes quantitative scenarios on a possible evolution of the EU petrochemical industry towards climate neutrality. This industry will be one of the remaining sectors in a climate neutral economy still handling hydrocarbon material to manufacture polymers. Concepts of a climate neutral chemical industry stress the need to consider the potential end-of-life emissions of polymers produced from fossil feedstock and draft the vision of using renewable electricity to produce hydrogen and to use renewable (hydro)carbon feedstock. The latter could be biomass, CO2 from the air or recycled feedstock from plastic waste streams.
The cost-optimization model used to develop the scenarios describes at which sites investments of industry in the production stock could take place in the future. Around 50 types of products, the related production processes and the respective sites have been collected in a database. The processes included cover the production chain from platform chemicals via intermediates to polymers. Pipelines allowing for efficient exchange of feedstock and platform chemicals between sites are taken into account as well. The model draws on this data to simulate capacity change at individual plants as well as plant utilization. Thus, a future European production network for petrochemicals with flows between the different sites and steps of the value chain can be sketched.
The scenarios described in this paper reveal how an electrification strategy could be implemented by European industry over time with minimized societal costs. Today's existing assets as well as geographical variance of energy supply and the development of demand for different plastic sorts are the major model drivers.
Finally, implications for the chemical industry, the energy system and national or regional governments are discussed.
Driving forces of changing environmental pressures from consumption in the European food system
(2020)
The paper provides an integrated assessment of environmental and socio-economic effects arising from final consumption of food products by European households. Direct and indirect effects accumulated along the global supply chain are assessed by applying environmentally extended input-output analysis (EE-IOA). EXIOBASE 3.4 database is used as a source of detailed information on environmental pressures and world input-output transactions of intermediate and final goods and services. An original methodology to produce detailed allocation matrices to link IO data with household expenditure data is presented and applied. The results show a relative decoupling between environmental pressures and consumption over time and shows that European food consumption generates relatively less environmental pressures outside Europe (due to imports) than average European consumption. A methodological framework is defined to analyze the main driving forces by means of a structural decomposition analysis (SDA). The results of the SDA highlight that while technological developments and changes in the mix of consumed food products result in reductions in environmental pressures, this is offset by growth in consumption. The results highlight the importance of directing specific research and policy efforts towards food consumption to support the transition to a more sustainable food system in line with the objectives of the EU Farm to Fork Strategy.
Calculating MIPS 2.0
(2013)
The Wuppertal Institute developed, in the early 1990s, an input-oriented lifecycle-wide resource accounting method, the "Material Input per Service-Unit" concept (MIPS), today also referred to as "Material Footprint". The official handbook applicable to products, services, and processes describes a MS Excel-based sequential approach for calculating MIPS. Today's computing power, available to every researcher, and access to software and databases dedicated to lifecycle analysis make calculating MIPS using matrix inversion possible. This also opens up possibilities for enhancing MIPS-models programmatically: parameterizing the foreground and background systems, batch modeling for producing time series, and computational algorithms enhancing interpretation. The article provides (1) an overview of the methods and tools used for calculating MIPS from its origins to today, and (2) demonstrates some of the programmatically enhanced capabilities offered to MIPS-practitioners.
Air emissions accounts
(2010)
In this article, we analyze flows of the platinum group metals (PGMs) platinum, palladium, and rhodium and the environmental impacts associated with their supply in Europe. A model of the use of PGMs in Europe has been developed, and this is combined with a model of environmental pressures related to PGM production. Seven industrial sectors and product groups form the main users of PGMs in Europe, comprising the chemical, petroleum, and glass industries; jewelry, dentistry, electronic equipment, and car catalysts. Most relevant environmental impacts of secondary production in Europe and primary PGM production in South Africa, Russia, and Canada are taken into account, including emissions of sulphur dioxide and carbon dioxide and total material requirement. The article quantifies the PGM flows to, from, and within Europe in 2004. The automotive industry is the single largest user of primary PGMs, and catalytic converters represent the major PGM end use. The chemical and glass industries also require large amounts of PGM but rely mostly on secondary metals. The environmental impacts of primary production exceed those of secondary production by far. An analysis of the use of car catalytic converters shows that as a result of efforts to reduce air pollutant emissions in Europe, other negative environmental impacts, such as point-source pollution and mining waste, are occurring elsewhere - for example, at extraction and refining sites in Siberia and South Africa.
A model of the use of the platinum group metals (PGMs) platinum, palladium, and rhodium in Europe has been developed and combined with a model of the environmental pressures related to PGM production. Compared to the base case presented in Part I of this pair of articles, potential changes in PGM production and use are quantified with regard to cumulative and yearly environmental impacts and PGM resource use, for the period 2005–2020. Reducing sulfur dioxide (SO2) emissions of PGM producer Norilsk Nickel could cut the cumulative SO2 emissions associated with the use of PGMs in Europe by 35%. Cleaner electricity generation in South Africa could reduce cumulative SO2 emissions by another 9%. Increasing the recycling rate of end-of-life catalytic converters to 70% in 2020 could save 15% of the cumulative primary PGM input into car catalysts and 10% of the SO2 emissions associated with PGM production. In 2020, PGM requirements and SO2 emissions would be, respectively, 40% and 22% lower than the base case. Substituting palladium for part of the platinum in diesel catalysts, coupled with a probable palladium price increase, could imply 15% more cumulative SO2 emissions if recycling rates do not increase. A future large-scale introduction of fuel cell vehicles would require technological improvements to significantly reduce the PGM content of the fuel cell stack. The basic design of such vehicles greatly influences the vehicle power, a key parameter in determining the total PGM requirement.
In order to ensure security of supply in a future energy system with a high share of volatile electricity generation, flexibility technologies are needed. Industrial demand-side management ranks as one of the most efficient flexibility options. This paper analyses the effect of the integration of industrial demand-side management through the flexibilisation of aluminium electrolysis and other flexibilities of the electricity system and adjacent sectors. The additional flexibility options include electricity storage, heat storage in district heating networks, controlled charging of electric vehicles, and buffer storage in hydrogen electrolysis. The utilisation of the flexibilities is modelled in different settings with an increasing share of renewable energies, applying a dispatch model. This paper compares which contributions the different flexibilities can make to emission reduction, avoidance of curtailment, and reduction of fuel and CO2 costs, and which circumstances contribute to a decrease or increase of overall emissions with additional flexibilities. The analysis stresses the rising importance of flexibilities in an energy system based on increasing shares of renewable electricity generation, and shows that flexibilities are generally suited to reduce carbon emissions. It is presented that the relative contribution towards the reduction of curtailment and costs of flexibilisation of aluminium electrolysis are high, whereby the absolute effect is small compared to the other options due to the limited number of available processes.
Contemporary combined heat and power (CHP) systems are often based on fossil fuels, such as natural gas or heating oil. Thereby, small-scale cogeneration systems are intended to replace or complement traditional heating equipment in residential buildings. In addition to space heating or domestic hot water supply, electricity is generated for the own consumption of the building or to be sold to the electric power grid.
The adaptation of CHP-systems to renewable energy sources, such as solid biomass applications is challenging, because of feedstock composition and heat integration. Nevertheless, in particular smallscale CHP technologies based on biomass gasification and solid oxide fuel cells (SOFCs) offer significant potentials, also regarding important co-benefits, such as security of energy supply as well as emission reductions in terms of greenhouse gases or air pollutants. Besides emission or air quality regulations, the development of CHP technologies for clean on-site small-scale power generation is also strongly incentivised by energy efficiency policies for residential appliances, such as e.g. Ecodesign and Energy Labelling in the European Union (EU). Furthermore, solid residual biomass as renewable local energy source is best suited for decentralised operations such as micro-grids, also to reduce long-haul fuel transports. By this means such distributed energy resource technology can become an essential part of a forward-looking strategy for net zero energy or even smart plus energy buildings.
In this context, this paper presents preliminary impact assessment results and most recent environmental considerations from the EU Horizon 2020 project "FlexiFuel-SOFC" (Grant Agreement no. 641229), which aims at the development of a novel CHP system, consisting of a fuel flexible smallscale fixed-bed updraft gasifier technology, a compact gas cleaning concept and an SOFC for electricity generation. Besides sole system efficiencies, in particular resource and emission aspects of solid fuel combustion and net electricity effects need to be considered. The latter means that vastly less emission intensive gasifier-fuel cell CHP technologies cause significant less fuel related emissions than traditional heating systems, an effect which is further strengthened by avoided emissions from more emission intensive traditional grid electricity generation. As promising result, operation "net" emissions of such on-site generation installations may be virtually zero or even negative. Additionally, this paper scopes central regulatory instruments for small-scale CHP systems in the EU to discuss ways to improve the framework for system deployment.
The Low Carbon Future Cities (LCFC) project aims at facing a three dimensional challenge by developing an integrated city roadmap balancing: low carbon development, gains in resource efficiency and adaptation to climate change. The paper gives an overview of the first outcomes of the analysis of the status quo and assessment of the most likely developments regarding GHG emissions, climate impacts and resource use in Wuxi - the Chinese pilot city for the LCFC project. As a first step, a detailed emission inventory following the IPCC guidelines for Wuxi has been carried out. In a second step, the future development of energy demand and related CO2 emissions in 2050 were simulated in a current policy scenario (CPS). In parallel, selected aspects of material and water flows for the energy and the building sector were analyzed and modeled. In addition, recent and future climate impacts and vulnerability were investigated. Based on these findings, nine key sectors with high relevance to the three dimensions could be identified. Although Wuxi's government has started a path to implement a low carbon plan, the first results show that, for the shift towards a sustainable low carbon development, more ambitious steps need to be taken in order to overcome the challenges faced.
Increasing urbanisation and climate change belong to the greatest challenges of the 21st century. A high share of global greenhouse gas emissions are estimated to originate in urban areas (40 % to 78 % according to UN Habitat 2010). Therefore, low carbon city strategies and concepts implicate large greenhouse gas (GHG) mitigation potentials. At the same time, with high population and infrastructure densities as well as concentrated economic activities, cities are particularly vulnerable to the impacts of climate change and need to adapt. Scarce natural resources further constrain the leeway for long-term, sustainable urban development. The Low Carbon Future Cities (LCFC) project aims at tapping this three-dimensional challenge and will develop an integrated strategy / roadmap, balancing low carbon development, gains in resource efficiency and adaptation to climate change. The study focuses on two pilot regions - one in China (Wuxi) and one in Germany (Düsseldorf+) - and is conducted by a German-Chinese research team supported by the German Stiftung Mercator. The paper gives an overview of first outcomes of the analysis of the status quo and assessment of the most likely developments regarding GHG emissions, climate impacts and resource use in Wuxi. The project developed an emission inventory for Wuxi to identify key sectors for further analysis and low carbon scenarios. The future development of energy demand and related CO2 emissions in 2030 were simulated in the current policy scenario (CPS), using five different sub-models. Selected aspects of Wuxi's current material and water flows were analysed and modelled for energy transformation and the building sector. Current and future climate impacts and vulnerability were investigated. Recent climatic changes and resulting damages were analysed, expected changes in temperature and precipitation in the coming four decades were projected using ensembles of three General Circulation Models. Although Wuxi's government started a path to implement a low carbon plan, the first results show that more ambitious efforts are needed to overcome the challenges faced.
The transformation processes towards a sustainable development are complex. How can science contribute towards new solutions and ideas leading to change in practice? The authors of this book discuss these questions along the energy transition in the building sector.
A transformative research that leaves the neutral observer position needs appropriate concepts and methods: how can knowledge from different disciplines and from practice be integrated in order to be able to explain and understand complex circumstances and interrelations? What role do complex (agent-based) models and experiments play in this respect? Which mix of methods is required in transformative science in order to actively support the actors in transformation processes?
Theses questions are illustrated by the example of the BMBF funded project "EnerTransRuhr".