Refine
Document Type
- Report (33)
- Peer-Reviewed Article (27)
- Working Paper (7)
- Part of a Book (5)
- Conference Object (4)
- Doctoral Thesis (2)
- Contribution to Periodical (1)
Language
- English (79) (remove)
Division
- Kreislaufwirtschaft (79) (remove)
Treating waste as a resource and the design of a circular economy have been identified as key approaches for resource efficiency. Despite ambitious targets, policies and instruments that would enable a transition from a conventional waste management to an integrated and comprehensive resource management are still missing. Moreover, this will require innovative policy mixes which do not only address different end-of-pipe approaches but integrate various resource efficiency aspects from product design to patterns of production and consumption. Based on the results of a project funded by the Seventh Framework Programme for Research and Technological Development named "POLFREE - Policy Options for a resource efficient economy", this paper addresses several aspects of the conceptualization of policy mixes with regard to waste as a specific resource efficiency challenge. The guiding research interest of this paper is the combination of policies necessary to create a full circular economy. In a first step, the present waste policy frameworks, institutions and existing incentives at national level are examined in order to disclose regulatory and policy gaps. Based on this, the second part of the paper describes and analyses specific waste-related resource efficiency instruments with regard to their potential impacts under the constraints of various barriers. Based on the assessment of the country analyses and the innovative instruments, the paper draws conclusions on waste policy mixes and political needs.
To minimize the impact of end-of life vehicles on the environment they have to be managed in accordance with the legal requirements. Against this background it is important to comprehend the whereabouts of permanently decommissioned passenger cars. From the available statistical sources it was only possible to account for the whereabouts in parts for the last years. The subject-matter of the research project was the closure of this "statistical gap" to the maximum extent possible. The objectives of the project were the identification of the possible reasons underlying the "statistical gap", the determination, itemisation and, to the maximum extent possible, quantification of information on the actual whereabouts of permanently decommissioned vehicles and the development of measures and instruments that can be used to permanently improve the data situation.
The paper undertakes a closer look on the relation of institutions and policy mixes within the multi-level scope of the European Union in the policy field of resource efficiency and maps out different configurations. Based on an extensive analysis of scope, foci, instruments and especially the distribution of institutional responsibilities in 32 EU countries, the paper aims to amplify the categorisation of policy mix characteristics developed by Rogge and Reichardt by considerations on the institutional background of policy mixes. It specifically brings into question the potential impact of different institutional settings on the consistency and coherence of approaches in this evolving policy field. Resource efficiency is an eminently cross-cutting policy concept and a specific interesting unit of analysis due to the observable heterogeneity of implementation approaches. However, it is still mainly disconnected from energy issues and, at the same time, EU policy has shifted to the circular economy approach, indicating further need for streamlining with the resource efficiency approach. The paper stresses the need to include institutional and multi-level governance issues for policy design and the development of policy mixes, especially in the context of the now refocused resource efficiency agenda to the transition to a circular economy.
Stepping up waste prevention : challenges and opportunities for national waste prevention programmes
(2017)
Facing an ever-increasing global consumption of natural resources and related environmental as well as socioeconomic challenges, the transition towards a circular economy will be of crucial importance. The issue is high on the political agenda, especially since the European Commission published its Circular Economy Action Plan in December 2015. Apparently different stakeholders have very different perceptions of the concept as well as different expectations for its implementation. During a workshop series by the Friedrich Ebert Stiftung, experts from policy, science, administration, industry and unions discussed key issues for the circular economy: What's the status quo in Germany? How can the circular economy be implemented in a comprehensive and efficient way? Which instruments are available? Is the legal framework on EU and national level sufficient for the evolvement of a circular economy? What is the role of the consumer? What are the economic potentials especially with regard to job creation? How can research and innovation policy contribute to this process? This paper aims to summarise the different discussions.
Germany's waste management system is one of the world's most advanced - its primary objective is to dispose of waste in a way that is safe for both people and the environ- ment. However, only about 14 per cent of the raw materials used in industry are derived from recycling processes; the remainder are still sourced from primary materials. The circular economy is not yet being implemented on a large enough scale. Recyclates or recycled materials, i.e. secondary raw materials recovered from waste, are being fed back into production and usage processes at volumes that are far below what is possible. If this system were to be improved, loss of value, dependence on volatile commodity markets, lower resource productivity, and externalities in the form of environmental pollution could be avoided. A drive towards digitalisation in industry and the waste management sector could make this happen. A study by the German Federal Ministry for the Environment, Nature Conservation, Building and Nuclear Safety (BMUB) indicates that no other lead market in the environmental sector stands to benefit from digitalisation more than the circular economy - and that, at the same time, no sector has ever been so poorly positioned.
The contribution of the EU bioeconomy to sustainable development depends on how it is implemented. A high innovation potential is accompanied by considerable risks, in particular regarding the exacerbation of global land use conflicts. This article argues that a systemic monitoring system capable of connecting human-environment interactions and multiple scales of analysis in a dynamic way is needed to ensure that the EU bioeconomy transition meets overarching goals, like the Sustainable Development Goals. The monitoring should be centered around a dashboard of key indicators and targets covering environmental, economic, and social aspects of the bioeconomy. With a focus on the land dimension, this article examines the strengths and weakness of different economic, environmental and integrated models and methods for monitoring and forecasting the development of the EU bioeconomy. The state of research on key indicators and targets, as well as research needs to integrate these aspects into existing modeling approaches, are assessed. The article concludes with key criteria for a systemic bioeconomy monitoring system.
Renewable energy targets in the European Union (EU) have raised the demand for timber and are expected to increase dependence on imports. However, EU timber consumption levels are already disproportionally high compared to the rest of the world. The question is, how much timber is available for the EU to sustainably harvest and import, in particular considering sustainable forest management practices, a safe operating space for land-system change, and the global distribution of "common good" resources. This article approaches this question from a supply angle to develop a reference value range for the current as well as future sustainable supply of timber at the EU-27 and global levels. For current supply estimates, national-level data on forest area available for wood supply, productivity in that area, as well as the rate available for harvest were collected and aggregated into three potential supply scenarios. For future supply estimates, a safe operating space scenario halting land use change, a sensitivity analysis, and a literature review were performed. To provide both a comparison of global versus EU sustainable supply capacities and to develop a benchmark toward evaluating and comparing levels of consumption to sustainable supply capacities, per capita calculations were made. Results revealed that the per capita sustainable supply potential of EU forests is estimated to be around three times higher than the global average in 2050. Whether a global or EU reference value is more appropriate for EU policy orientation, considering both strengthened economic and cultural ties to the forest in forest-rich countries as well as the need to prevent problem shifting associated with exporting land demands abroad, is discussed. Further research is needed to strengthen and harmonize data, improve methods for modeling future scenarios and incorporate interdisciplinary and multi-stakeholder perspectives toward the development of robust and politically relevant reference values for sustainable consumption levels.
This report is a deliverable of the project "Bridging the raw materials knowledge gap for reuse and remanufacturing professionals" (ReUK) and of the second work package "Identification of knowledge gaps and industry needs". Funded by the Knowledge and Innovation Community for Raw Materials, ReUK will develop life-long education services tailor-made for the needs of the reuse- and remanufacturing sector in Europe. The present "Report on ten knowledge gaps" represents a further key step in delivering these services.
This report examines the role of waste management in the context of a circular economy transition. Key challenges relate to moving beyond the perception of "waste as a problem" to "waste as a resource". To this end high levels of cooperation are needed between the waste industry and enterprises engaged in circular economy business models. Collecting high quality waste streams for re-use, remanufacturing and recycling also requires citizen engagement and integrated infrastructure development from the municipal to the EU level. Ultimately, both waste prevention as well as a widespread growth in circular economy activities will require a coherent and holistic approach that takes recovery options into account at every stage of the product life cycle. Co-benefits will include reducing environmental burden as well as creating both high-skilled and low-skilled jobs for an inclusive, green economy. In concrete terms, this report examines five waste streams identified in the EU's Circular Economy Action Plan: municipal waste, packaging waste, food waste, bio-waste and critical raw materials. It looks at the current state of policy development, presents trends and data comparing Member State performance, reviews the state of technological development, and assesses employment opportunities relevant to each waste stream in the overarching context of assessing progress toward the circular economy transition in the EU. Case studies of specific options for collecting and treating waste based on experiences in Denmark, Italy and Slovenia complement the more macro-level analysis of trends. Finally, key policy options are identified, in particular focused on ways to prevent waste, align circular economy and waste management objectives and improve the quality and reliability of indicators toward more robust monitoring.
The growing demand for wood to meet EU renewable energy targets has increasingly come under scrutiny for potentially increasing EU import dependence and inducing land use change abroad, with associated impacts on the climate and biodiversity. This article builds on research accounting for levels of primary timber consumption - e.g., toward forest footprints - and developing reference values for benchmarking sustainability - e.g., toward land use targets - in order to improve systemic monitoring of timber and forest use. Specifically, it looks at future trends to assess how current EU policy may impact forests at an EU and global scale. Future demand scenarios are based on projections derived and adapted from the literature to depict developments under different scenario assumptions. Results reveal that by 2030, EU consumption levels on a per capita basis are estimated to be increasingly disproportionate compared to the rest of the world. EU consumption scenarios based on meeting around a 40% share of the EU renewable energy targets with timber would overshoot both the EU and global reference value range for sustainable supply capacities in 2030. Overall, findings support literature pointing to an increased risk of problem shifting relating to both how much and where timber needed for meeting renewable energy targets is sourced. It is argued that a sustainable level of timber consumption should be characterized by balance between supply (what the forest can provide on a sustainable basis) and demand (how much is used on a per capita basis, considering the concept of fair shares). To this end, future research should close data gaps, increase methodological robustness and address the socio-political legitimacy of the safe operating space concept towards targets in the future. A re-use of timber within the economy should be supported to increase supply options.
Assessing global resource use : a systems approach to resource efficiency and pollution reduction
(2017)
Against the background of the question which role tax based instruments have to play in policy mixes to counteract the unbroken growth trend of global resource use, this chapter initially describes how the insights from a country comparative study on national resource policy frameworks could be linked to instruments for the internalisation of external environmental costs on a European scale. On the basis of a project specific but substantiated resource use vision and potential governance principles for three transition processes to reach the goals, the tax concepts are subsequently connected to simulation scenarios in order to illustrate the resource impacts that could be achieved by those policy reforms. Conclusively, barriers to such fundamental changes of framework conditions are briefly reflected upon and some conclusions are drawn.
The growing demand for timber, in particular for renewable energy, increases pressures on global forests and requires a robust monitoring system to ensure sustainability. This article takes a first step toward more systemic monitoring by asking how the global use of forests by EU consumers can be accounted for. Specifically, this article builds on and develops the method of global land use accounting to account for the EU-27's consumption of primary timber between 2002 and 2011 in terms of both volume and forest area. It assesses international trade flows for around 100 commodities and converts them into a volume of primary raw timber based on conversion values. Results reveal that both imports and exports increased over the assessed time period, with primary EU-27 timber estimated to be around 1 m3/cap in 2011. Gaps, uncertainty and a lack of harmonization regarding especially trade data and conversion values are key challenges to further improving the robustness of the method and reliability of results. Future research may focus on improving the method to address in particular recycled and recovered flows as well as the question of whether area or volume is the most appropriate metric for further development of a forest footprint indicator.
Digital platforms may yield a host of advantages in putting circular economy into effect. This paper analyses the related chances and discusses requirements of digital platforms for the realization of a circular economy. It specifically points to potential solutions offered by digital platforms for existing barriers. From there it identifies issues that need specific attendance to create economically and ecologically functional platforms. Three economically relevant perspectives are discussed for this: a management perspective, a legislative perspective and a social/systems perspective.
A policy mix for resource efficiency in the EU : key instruments, challenges and research needs
(2019)
Against the background of an often wasteful use of natural resources, the European Union has made resource efficiency a top policy priority. Policy formulation is, however, at a very early stage in many Member States, with often vague notions of what resource efficiency means, characterised by fragmented instruments and overlapping competencies. This paper develops a conceptual framework for defining, assessing and developing resource efficiency policy mixes. It argues that a mix of policies and instruments is best suited to overcoming the complex challenges of the 21st Century. Such a mix addresses multiple resource domains at a strategic, high level and contains interacting instruments targeting multiple actors, levels of governance and sectors and life-cycle stages of resource use. This paper looks at criteria for effective resource efficiency policy instruments, presents both an indicative policy mix across 9 policy domains and case studies (on environmental harmful subsidies, supply chain efficiency in food systems and product-service systems) and identifies key challenges to overcome trade-offs in instrument design, maximise synergies, reduce conflicts, promote coherence, coordinate activities and move from theory to practice. Research needs are discussed regarding who shall devise, implement, and coordinate such a policy mix, considering negotiating power, timing and complexity.
With the introduction of the Roadmap to a Resource Efficient Europe (2011) and the more recent commitment of The Action Plan towards the Circular Economy (2015), the European Commission (EC) has expressed its fundamental interest to substantially improve the resource efficiency of the European economy and enable the transition towards the Circular Economy (CE). This policy push has meanwhile been complemented by some quite ambitious national programmes for RE and CE and institutional advances but it is not yet bound to targets or mandatory reporting.
Against this background, the objective of this paper is to give a comprehensive overview of the current policy frameworks at EU and a selection of MSs and provide insights into the elements shaping policy processes. The analytical framework relies on three essential interconnected components: the policy framework, the economic incentive system and economic side policies which are relevant in the context of RE and CE and actor constellations. The paper does this looking at the interface between EU-MSs. The analysis is based on different empirical surveys in which the policy development is observed and discussed (EEA 2011, 2016a, 2016b, EIO 2013, 2014, 2016) and a comprehensive review of legislative and policy frameworks at the EU and selected MSs, undertaken as part of the project POLFREE (Policy option for a Resource-Efficient Economy) (Domenech et al., 2014, Bahn-Walkowiak et al., 2014). The analysis reveals that policy frameworks for RE/CE are complex and fragmented as competing goals and visions reduce effectiveness of measures. The paper makes recommendations as to how EU and MS policies could improve RE in a coordinated way, but recognizes that achieving such coordination will be challenging in the current political context.
Addressing food waste prevention is one target of the Sustainable Development Goals (SDGs) and a major task for the UN Environmental Programme and the European Commission. It is promising in terms of its environmental saving potential. However, it also leads to consumers being able to save money, which they then are likely to spend, thus again causing a negative environmental impact. This dimension of the so-called indirect rebound effect, which prevents the desired ecological benefits from being achieved, is investigated in this paper. By using a single-region environmentally extended input-output model from a production perspective, the indirect rebound effects from food waste prevention in Germany are analysed. Any political action needs to consider not only a differentiation in income class, but also alternative concepts such as the principles of sufficiency in order to achieve all ecological benefits and specifically the third target of SDG 12.
The earth as we know it can only continue to exist if humanity finds a way to switch to a sustainable use of energy and resources. This work contributes to the research carried out to achieve this goal by improving the coating of adsorptive materials. These are used in heat transformation and drying processes that allow for efficient temperature and humidity control in buildings. A central component of these adsorptive coatings is the binder that acts as "glue" in the manufacturing of the coating. In this work the methods to evaluate binder performance regarding their thermal stability under the process conditions, their mechanical stability and their influence on the adsorptive properties of the coating were established. The coatings have to meet special requirements due to the thermal stresses and low pressure atmosphere they experience in these applications. A selection of silicone binders was then characterized with the established tests according to these requirements. Additionally a selection of inorganic binders was investigated because they allow for the use of high desorption temperatures and thus a high energy efficiency of the process. Out of these binders Silres® MP50E emerged as the most promising one due to very good adsorptive properties of the coating, its good temperature stability and ease of use. While some of the inorganic binders showed very good adsorptive properties and temperature stability the mechanical stability of all inorganic binders was not sufficient for their use in adsorption heat transformation technology. This is the first time that a broad selection of binders was evaluated with regards to adsorptive coatings and the results published in literature. With a suitable binder identified, the next step was to optimize the coating of the heat exchangers in order to work out how to manufacture the most efficient and powerful heat exchangers. Samples with different coating thicknesses were manufactured in small scale and full scale and their adsorption behavior was characterized. It could be shown for the first time that it is possible to increase energy efficiency by improving the mass ration of adsorber to coating and increase the delivered power at the same time. This was shown for small and full scale samples. It was shown that under the corresponding conditions the heat transfer from the coating layer to the adsorber metal substrate is the limiting step in the process. These results can now be used for the planning and construction of adsorbers. With knowledge of a suitable binder and how to coat efficient, powerful adsorbers, the coating process itself was improved to allow for industrial scale manufacturing. A central point here is the ability to control slurry rheology. Out of many rheology additives those that are suited for the application in adsorption heat transformation were identified and their influence on the slurry rheology thoroughly characterized. Additionally the process of slurry preparation could be simplified for several different adsorbents. Here it was shown that the supersonic deagglomeration step is not necessary to prepare a slurry. Extending the possible coating techniques and in addition to the dip coating process used so far, the spray coating of adsorptive coatings was established for the first time in literature. This process is widely used in the industry and allows for easier plugin into existing coating processes. For the coating of high resolution patterns a proof of concept of the screen printing process was carried out.
Because prevention is closely linked to complex consumption patterns, even cultural changes, such as increasing environmental awareness, changes in the average size of households or changes in the industrial structure of an economy, are relevant factors for the interpretation of changes in the generation of waste - it is more or less impossible to isolate the effect of specific waste prevention measures in this complex system. This must be considered, in particular, in international comparisons of policies and their potential transferability. The guidelines of the European Commission on waste prevention also point to the particular problem of data availability in the area of prevention: as waste statistics focus mainly on the treatment and fate of wastes, they are often of limited value for prevention of waste because they don't give sufficient information about their origins or reasons for their generation.
Against this background, this report has the following objectives:
Chapter 2 discusses strengths and weaknesses of typical waste-based prevention indicators; Chapter 3 analyses possible indicators that consider an upstream perspective and take into account the ecological rucksacks of products and components that have become waste; Chapter 4 focuses on specific product groups that could be targeted by waste prevention indicators.
In general, the report describes the complexity of measuring waste prevention and outlines pros and cons of possible approaches. The final chapter aims to draw rather pragmatic conclusions on possibly most preferable options for future policy-making.
Digitalisation is in full swing and it is changing and influencing the world of the 21st century as no other dynamics of change has done before. Dealing with its impacts and at the same time shaping digitalisation itself is therefore a core task for achieving a globally sustainable transformation (German Advisory Council on Global Change - WGBU, 2019). But which direction should digitalisation take to ensure that it makes e ective contributions to globally sustainable development? And what is the specific approach needed to steer digitalisation in the right direction?
Each year, approximately one-third of the food produced for human consumption is lost or wasted worldwide. The waste of resources used for this food has significant environmental impacts in terms of land and water use as well as greenhouse gas emissions. Consequently, one of the targets of the UN sustainable development goals is to halve per capita global food waste at the retail and consumer levels and reduce food losses along production and supply chains by 2030. However, sufficient knowledge about the suitability of instruments for food waste prevention is still lacking. The purpose of this paper is therefore threefold: first, it outlines the generation and causes of food losses and waste. Second, it discusses good practices from different countries, such as laws to reduce food waste, voluntary agreements, awareness campaigns and results from behavioural economics. Finally, based on these findings, this paper identifies barriers to as well as requirements for the implementation of effective and efficient instruments.
The key objective of this deliverable is to gain insights on and assess how CE is being implemented and R&I is being funded at regional level, e.g., via the RIS3 strategy and Structural Funds. As such it sets the scope for the project and provides the background against which programmes and measures can be understood, assessed, developed and recommended in succinct tasks and work packages. The objective of this report is to provide a concise overview of the current R&I priorities, as expressed in running and newly introduced funding and legislative measures with respect to Circular Economy in European countries and regions.
On the basis of a literature research, this subtask develops a conceptional framework for a common understanding of CE within the project team and for the following work packages and tasks. After a brief introduction into the objectives and the context of a circular economy, a more elaborated look into the necessity of an explicit understanding of CE, the objectives, the spatial perspective of CE and the specific challenges within the CICERONE context will be done, in order to develop a basis for a common understanding within the project context. Circular economy can and has to be understood as an (eco-)innovation agenda. Therefore, the paper investigates the role policy has to play to support innovation for a CE transition, for creating the framework conditions and why CE has also to be build from the ground up. Finally, the paper looks from two perspectives at emerging trends and business models in a CE to sketch next steps towards the transition in a selection of central sectors. Conclusions are drawn on the basis of the insights gained by the preceding chapters.
This report provides an overview of the main findings from the different research tasks in the CIRCTER project and delivers selected policy messages with European coverage. The report provides: (Sec. 2) a territorial definition of the circular economy; (Sec. 3) insights into the available statistics on material and waste patterns and flows and their interpretation, alongside new territorial evidence on both aspects; (Sec. 4) a sectoral characterisation of the circular economy at regional level (NUTS-2), including data on turnover and jobs; (Sec. 5) key findings from the CIRCTER case studies; (Sec. 6) a systemic interpretation of the circular economy that works as a knowledge-integration mechanism for the entire report; (Sec. 7 and 8) an analysis of the most relevant circular economy policies and strategies at various territorial levels; (Sec. 8) a subset of policy recommendations focusing in particular on territorial and cohesion policies, and; (Sec. 9) suggestions for further research.
In this paper three approaches on transitions pathways are combined to study the role of agricultural nature conservation in the Dutch land use domain for achieving internationally agreed climate and biodiversity targets. The three perspectives used are the Multilevel Perspective (MLP), Initiative Based Learning (IBL) and Integrated Assessment Modelling (IAM). The analysis provides insights in how the combination of different research approaches can lead to more comprehensive policy advice on how agricultural nature conservation could help to achieve internationally agreed sustainability goals related to climate change and biodiversity. IAM shows under which conditions agricultural nature conservation could be consistent with European and global long-term goals regarding food security, biodiversity and climate. MLP provides insight into the extent in which agricultural nature conservation has affected or changed the existing nature and agricultural regimes. IBL, finally, reveals the challenges of encouraging agricultural nature conservation with policy measures. Our analysis shows that a combined perspective provides a deeper understanding of the underlying processes, reasons and motives of agricultural nature conservation, leading to more comprehensive policy recommendations.
CICERONE aims to bring national, regional and local governments together to jointly tackle the circular economy transition needed to reach net-zero carbon emissions and meet the targets set in the Paris Agreement and EU Green Deal. This document represents one of the key outcomes of the project: a Strategic Research & Innovation Agenda (SRIA) for Europe, to support owners and funders of circular economy programmes in aligning priorities and approaching the circular economy transition in a systemic way.
The study sheds light on the background of the prevention of plastic waste from packaging and disposable products by explaining the need for action, the environmental impacts and risks to human health. Experiences of the members of the PREVENT Waste Alliance and their partners in the prevention of plastic waste by multi-actor partnerships are presented by means of 17 best practice examples. Finally, the study gives recommendations for the reduction of plastic waste and the further work of the PREVENT Waste Alliance. These include success factors for waste prevention, necessary next steps and conclusions regarding the necessary political framework conditions.
We conducted a random allocation experiment at fashion week in Berlin in 2017, testing how face-to-face (f2f) communication affects sales of a fashion start-up focusing on second-hand. The experiment revealed that 11% of guests of an f2f event afterwards turned paying customers with an average basket size 11.8% higher than the overall sales event average. We add insights to research on entrepreneurial practice as well as on offline operations in the context of circular consumption in fashion, exposing the leveraging effect of f2f communication for customer acquisition and revenue of start-ups in the field of sustainable fashion.
Businesses like Airbnb have shown that a successful circular economy (CE) business can operate exclusively online. Although online communication and web appearance attributes have been subject to academic research given accelerated digitization, there is still a lack of knowledge about online attributes and their role in facilitating CE. We close the portrayed knowledge gap by conducting a discrete-choice experiment with best to worst scaling and focusing on the effect of CE experience on the perception of a CE website by ranking nine online attributes, grouped in three subsets. We therefore contribute by identifying online attributes that are perceived as favorable for CE businesses and detect how participation in CE activities affects the perception of these attributes. We find that third-party associated online attributes (e.g., user reviews or third-party guarantees) rank significantly higher throughout CE consumption patterns of the sample, being always amongst the top three attributes. This novel finding on online preferences opens a new direction for further research, as well as allows practitioners to optimize online operations accordingly. Furthermore, we find that users without prior touchpoints with CE have a higher need for information about the business model as compared to CE active users who are more interested in community related attributes.
Effectiveness and efficiency of food-waste prevention policies, circular economy, and food industry
(2020)
Digitalisation is taking place at a fast pace in all European countries and it is transforming the economies, societies, communication, jobs and the necessary skills for the workplace and everyday life. The Covid-19 pandemic is also accelerating digitalisation at many levels.
To address the great challenges resulting from this, the European Commission has launched the Green Deal, a long-term transformation strategy towards an innovative and sustainable society. Three important initiatives under the Green Deal are the New Circular Economy Action Plan, the Biodiversity Strategy for 2030 and the Zero Pollution Action Plan. The various strategies and action plans draw up a large portfolio of measures, instruments and milestones that are always linked to digital technologies. Ideally, these are eco-innovative and sustainable and contribute to improving living conditions in Europe.
The EIO Biennial Report 2020, which looks at a different topic every two years, considers digitalisation a major opportunity to accelerate the transition to a circular Europe. In the current report, the authors provide an overview of eco-innovation trends, illustrated by digital technology and policy practices that can further drive the circular economy.
The waste prevention program (WPP) from 2013 must be evaluated every 6 years and updated if necessary. The review and evaluation of the implementation of the WPP took place within the scope of the project. Based on the analysis results for the implementation of the WPP at federal, state and municipal level and an assessment of existing prevention potentials, concrete proposals for a possible further development and updating of the program on prioritized waste streams and corresponding priority prevention approaches were developed. In addition, structural adjustment and change needs of the WPP were worked out and further research was shown.
Germany's eco-innovation performance has declined compared to previous reports and scores 123 against 100 of the EU average. It is still quite high with respect to the input side of eco-innovation and relatively good, i.e. above EU average concerning socio-economic and eco- innovative outputs. However, the revised eco-innovation index shows weaknesses in eco-innovation activities and environmental outcomes. All in all, Germany ranks 6 this year.
This study presents in detail: the use of plastic products and the opportunities for recyclate use in the construction sector, quantities of plastic used, take-back systems, recycling techniques, current recyclate use and plastic construction product packaging.Potentials for increasing high-quality recyclate use were identified. Existing hurdles and options for action for industry and politics are presented. Current recyclate use as well as its potential use are strongly dependent on the application area of plastics. The biggest hurdles for the use of recycled materials are product life time, dismantling and technical requirements.
By use of macro-economic model EXIOMOD, the expected impacts of actions described in the Strategic Research and Innovation Agenda (SRIA) have been analyzed. The results of this analysis show that the R&I actions described in the SRIA contribute to decoupling economic growth from resource use. The actions are expected to cause an increasing gross domestic product and a decreasing raw material demand. This results in an increasing extracted resource productivity, a measure used to show the decoupling of economic growth and resource use. It can however be questioned whether the actions in the SRIA - or the measures implemented in the model - assume a strong enough pace for decoupling economic growth and material use. The actions contribute to the climate goals of the European Commission, by showing a pathway through which the emissions of greenhouse gas can be reduced.
The need for a transition towards a circular economy (CE) is evident, as the current economic model is based on the exploitation of far more resources than the planet can replenish sustainably. A significant part of this economic transition is the inception of new, CE-oriented startups and business activities. While business model frameworks (BMF), such as the Business Model Canvas (BMC), were at the center of discussions about structuring business ideas in the beginning of the millennium, the conversation must now shift towards circular BMFs (CBMF). This paper follows the Design Research Methodology (DRM) for an empirical approach to devising a novel CBMF, including expert interviews as well as a first application of the framework with a startup. Throughout this process, a new and innovative tool called Circular Business Framework (CBF) was created and tested based on CE principles.
With increasing world population and an unsettling resource scarcity in the back, sustainble consumption has moved to the foreground of political, economical and social discussions. One major school-of-thought is Circular Economy (CE), an approach summarizing various sustainable consumption activites under one roof. However, quantitative studies on the consumer are rare, yet crucial for a transfer from linear to circular consumption. This dissertation adds to literature by providing pioneer insights into consumer behavior in CE as an overarching concept, instead limiting research on singular subconcepts. Namely, four consumer activities are studied: recycling, upcycling, renting and sharing. In order to identify relevant insights for both academics and practitioners in CE, the research question ("what drives participation in CE?") is broken down into sub-hypotheses, which are addressed by three empirical studies. Using the SOR-Model (adaption Belk 1975) as overarching logic, the three studies deal with (1) the consumer (and their motivation) and situational stimuli (both (2) offline and (3) online). Respectively, three data sets are consulted to assess the sub-hypotheses and to identify overarching insights on how to accelerate consumer participation in CE, The research methodology employed ranges from a structured equation model (SEM), a random allocation field experiment during Fashion Week in Berlin to a discrete-choice model with best-worst scaling. The dissertation succeeds in revealing that (1) different activities in CE can be summarized in one latent variable, proving CE as a wholesome concept in consumer-related activities; that (2) Trust has a leveraging effect on participation in CE activities. Further, Trust can be enhanced offline via face-to-face interaction and online via third-party online attributes.; and that (3) experience in CE activities affects perception of online attributes, implying the need for adapted measures when dealing with CE-unexperienced consumers as compared to consumers with prior experience in CE activities.
Artificial intelligence in the sorting of municipal waste as an enabler of the circular economy
(2021)
The recently finalized research project "ZRR for municipal waste" aimed at testing and evaluating the automation of municipal waste sorting plants by supplementing or replacing manual sorting, with sorting by a robot with artificial intelligence (ZRR). The objectives were to increase the current recycling rates and the purity of the recovered materials; to collect additional materials from the current rejected flows; and to improve the working conditions of the workers, who could then concentrate on, among other things, the maintenance of the robots. Based on the empirical results of the project, this paper presents the main results of the training and operation of the robotic sorting system based on artificial intelligence, which, to our knowledge, is the first attempt at an application for the separation of bulky municipal solid waste (MSW) and an installation in a full-scale waste treatment plant. The key questions for the research project included (a) the design of test protocols to assess the quality of the sorting process and (b) the evaluation of the performance quality in the first six months of the training of the underlying artificial intelligence and its database.
Supply risks and environmental concerns drive the interest in critical raw material recycling in the European Union. Globally, waste electrical and electronic equipment (WEEE) is projected to increase by almost 40% until 2030. This waste stream can be a source of secondary raw materials. The determination of the economic feasibility of recycling and recovering specific materials is a data-intensive, time-consuming, and case-specific task. This study introduced a two-part evaluation scheme consisting of upper continental crust concentrations and raw material prices as a simple tool to indicate the potential and limitations of critical raw material recycling. It was applied to the case of light-emitting diodes (LED) lamps in the EU. A material flow analysis was conducted, and the projected waste amounts were analyzed using the new scheme. Indium, gallium, and the rare earth elements appeared in low concentrations and low absolute masses and showed only a small revenue potential. Precious metals represented the largest revenue share. Future research should confirm the validity and usefulness of the evaluation scheme.