Refine
Has Fulltext
- yes (124) (remove)
Document Type
- Report (64)
- Peer-Reviewed Article (26)
- Working Paper (19)
- Part of a Book (6)
- Contribution to Periodical (6)
- Conference Object (2)
- Master Thesis (1)
Division
- Kreislaufwirtschaft (124) (remove)
Unvermeidbare Emissionen aus der Abfallbehandlung : Optionen auf dem Weg zur Klimaneutralität
(2022)
Auch die thermische Abfallbehandlung in Deutschland kann zu einem Baustein des klimaneutralen Wirtschaftens werden. Allerdings sind dafür noch verschiedene Voraussetzungen zu schaffen. Technisch sind neben den bereits bekannten weitere innovative Verfahren in der Entwicklung; nicht zu vernachlässigen ist zudem die anspruchsvolle Aufgabe des CO2-Handlings. Hier ist zum einen der Aufbau der benötigten Infrastruktur zu nennen. In Bezug auf die Nutzung des abgetrennten CO2 ist auch die Industrie gefragt, um sektorübergreifende, klimafreundliche Use-Cases und Geschäftsmodelle rund um CCU und die weitmöglichste Schließung von Kohlenstoffkreisläufen zu entwickeln. Entsprechende Regularien und Marktanreize sind politisch zu setzen.
Electronics containing growing quantities of high value and critical metals are increasingly used in automobiles. The conventional treatment practice for end-of-life vehicles (ELV) is shredding after de-pollution and partial separation of spare parts. Despite opportunities for resource recovery, the selective separation of components containing relevant amounts of critical metals for the purpose of material recycling is not commonly implemented. This article is aimed to contribute to recycling strategies for future critical metal quantities and the role of extended material recovery from ELVs. The study examines the economic feasibility of dismantling electronic components from ELVs for high value metal recycling. The results illustrate the effects of factors as dismantling time, labour costs and logistics on the economic potential of resource recovery from ELVs. Manual dismantling is profitable for only a few components at the higher labour costs in western/northern parts of Europe and applicable material prices, including the inverter for hybrid vehicles, oxygen sensor, side assistant sensor, distance and near distance sensors. Depending on the vehicle model, labour costs and current material prices, manual dismantling can also be cost-efficient for also some other such as the heating blower, generator, starter, engine and transmission control, start/stop motor, drive control, infotainment and chassis control.
Germany's eco-innovation performance has declined compared to previous reports and scores 123 against 100 of the EU average. It is still quite high with respect to the input side of eco-innovation and relatively good, i.e. above EU average concerning socio-economic and eco- innovative outputs. However, the revised eco-innovation index shows weaknesses in eco-innovation activities and environmental outcomes. All in all, Germany ranks 6 this year.
Ohne die Transformation unserer Wirtschaft in eine nachhaltige Kreislaufwirtschaft werden wir die planetaren Grenzen weiter überschreiten, die Klimaziele verfehlen und die Ökosysteme schädigen. Deutschlands Politik hat sich in einem Flickenteppich aus Strategien und Gesetzen verfangen, aus dem eine echte Kreislaufwirtschaft nicht in der notwendigen Geschwindigkeit hervorgehen kann. Der Versuch, einer verschwenderischen Wirtschaft allein mit den Mitteln des Abfallrechts beizukommen, kann nicht glücken.
Nötig ist vielmehr eine ganzheitliche, übergeordnete deutsche Kreislaufwirtschaftsstrategie mit ambitionierten nationalen Zielen. Das vorliegende Papier will zeigen, was sich konkret verändern muss und welche Hebel es braucht, um die Kreislaufwirtschaft signifikant voranzubringen.
Es ist Zeit zu handeln. Innovative Ideen, Konzepte und Forderungen liegen auf dem Tisch. Sie machen es möglich, Deutschland auf eine zirkuläre Zukunft auszurichten, Rohstoffe und Materialien konsequent im Kreislauf zu führen und der Wirtschaft Planungssicherheit zu geben. Kreislaufwirtschaft ist Zukunftswirtschaft. Sie muss Kernthema einer neuen Regierung werden.
Der Anlass für die Evaluation des Deutschen Ressourceneffizienzprogramms ProgRess ist seine Fortschreibung im Jahr 2020. In zahlreichen Interviews identifizieren die Autorinnen und Autoren Stärken und Schwächen und zeigen Wege für eine institutionelle und strategische Weiterentwicklung auf. Die Bedeutung des Programms wird als überwiegend positiv, die bisherigen Ressourceneffizienzwirkungen hingegen als durchwachsen bewertet. Den Umsetzungsstand konnten die Befragten wenig beurteilen, da Indikatoren bislang nur für einen Teil der Maßnahmen vorhanden sind. Eine Priorisierung der Aktivitäten, verbindlichere Instrumente und Zielvorgaben sowie eine bessere Mittelausstattung gehören zu den Empfehlungen.
Durch vielfältige Innovationen und technologische Errungenschaften wird die Kreislaufwirtschaft stetig weiterentwickelt. Gleichzeitig existieren viele Unsicherheiten und Risiken im Hinblick auf die langfristigen Wirkungen dieser neuen Technologien. Zudem tragen viele Innovationen aufgrund von Rebound-Effekten zweifellos immer noch zur Beschleunigung des Ressourcenverbrauchs und der Verschwendung bei.
Digitalisation is taking place at a fast pace in all European countries and it is transforming the economies, societies, communication, jobs and the necessary skills for the workplace and everyday life. The Covid-19 pandemic is also accelerating digitalisation at many levels.
To address the great challenges resulting from this, the European Commission has launched the Green Deal, a long-term transformation strategy towards an innovative and sustainable society. Three important initiatives under the Green Deal are the New Circular Economy Action Plan, the Biodiversity Strategy for 2030 and the Zero Pollution Action Plan. The various strategies and action plans draw up a large portfolio of measures, instruments and milestones that are always linked to digital technologies. Ideally, these are eco-innovative and sustainable and contribute to improving living conditions in Europe.
The EIO Biennial Report 2020, which looks at a different topic every two years, considers digitalisation a major opportunity to accelerate the transition to a circular Europe. In the current report, the authors provide an overview of eco-innovation trends, illustrated by digital technology and policy practices that can further drive the circular economy.
The paper undertakes a closer look on the relation of institutions and policy mixes within the multi-level scope of the European Union in the policy field of resource efficiency and maps out different configurations. Based on an extensive analysis of scope, foci, instruments and especially the distribution of institutional responsibilities in 32 EU countries, the paper aims to amplify the categorisation of policy mix characteristics developed by Rogge and Reichardt by considerations on the institutional background of policy mixes. It specifically brings into question the potential impact of different institutional settings on the consistency and coherence of approaches in this evolving policy field. Resource efficiency is an eminently cross-cutting policy concept and a specific interesting unit of analysis due to the observable heterogeneity of implementation approaches. However, it is still mainly disconnected from energy issues and, at the same time, EU policy has shifted to the circular economy approach, indicating further need for streamlining with the resource efficiency approach. The paper stresses the need to include institutional and multi-level governance issues for policy design and the development of policy mixes, especially in the context of the now refocused resource efficiency agenda to the transition to a circular economy.
Eine sich vorrangig auf technologische Innovationen und Entlastungsgewinne stützende Wirtschafts- und Umweltpolitik wird für die dauerhafte Senkung der Ressourcennutzung nicht ausreichen. Es bedarf auch kultureller Veränderungen im Umgang mit Ressourcen und ambitionierter und wegweisender politischer Maßnahmen.
Die Transformation der bisher linearen Strukturen von Produktion und Konsum ("take-make-dispose") hin zu einer Circular Economy (CE) - im Sinne einer weiterentwickelten Kreislaufwirtschaft - gilt als zentrales Konzept zur Steigerung der Ressourceneffizienz und Kreislaufführung von Materialien und Produkten, zur Stärkung der Wettbewerbsfähigkeit der einheimischen Industrie sowie zur Schaffung neuer Arbeitsplatzpotenziale. Ziel dieses Forschungsmoduls ist es, die bisherige Umsetzung dieses Konzepts im Rahmen der Nachhaltigkeitsstrategie NRW zu analysieren und durch geeignete Impulse zu begleiten. Durch die Entwicklung eines Leitbilds für eine nachhaltige Circular Economy und zu seiner Messung geeigneter Indikatoren soll das noch an vielen Stellen unscharfe Konzept präzisiert und insbesondere an die spezifischen Ausgangsbedingungen und Herausforderungen von Nordrhein-Westfalen angepasst werden. Dazu sollen Bausteine für ein mittel- und langfristiges Leitbild (2030) entworfen werden, das einen konsistenten Entwicklungspfad für diesen komplexen Transformationsprozess beschreiben soll. Die bestehenden stark abfallwirtschaftlich geprägten Indikatoren zum Thema Kreislaufwirtschaft sollen durch Vorschläge für zusätzliche Indikatoren zur Nachhaltigkeit im Rahmen der Kreislaufwirtschaft (Circular Economy, CE) ergänzt werden.
The key objective of this deliverable is to gain insights on and assess how CE is being implemented and R&I is being funded at regional level, e.g., via the RIS3 strategy and Structural Funds. As such it sets the scope for the project and provides the background against which programmes and measures can be understood, assessed, developed and recommended in succinct tasks and work packages. The objective of this report is to provide a concise overview of the current R&I priorities, as expressed in running and newly introduced funding and legislative measures with respect to Circular Economy in European countries and regions.
Against the background of the question which role tax based instruments have to play in policy mixes to counteract the unbroken growth trend of global resource use, this chapter initially describes how the insights from a country comparative study on national resource policy frameworks could be linked to instruments for the internalisation of external environmental costs on a European scale. On the basis of a project specific but substantiated resource use vision and potential governance principles for three transition processes to reach the goals, the tax concepts are subsequently connected to simulation scenarios in order to illustrate the resource impacts that could be achieved by those policy reforms. Conclusively, barriers to such fundamental changes of framework conditions are briefly reflected upon and some conclusions are drawn.
On the basis of a literature research, this subtask develops a conceptional framework for a common understanding of CE within the project team and for the following work packages and tasks. After a brief introduction into the objectives and the context of a circular economy, a more elaborated look into the necessity of an explicit understanding of CE, the objectives, the spatial perspective of CE and the specific challenges within the CICERONE context will be done, in order to develop a basis for a common understanding within the project context. Circular economy can and has to be understood as an (eco-)innovation agenda. Therefore, the paper investigates the role policy has to play to support innovation for a CE transition, for creating the framework conditions and why CE has also to be build from the ground up. Finally, the paper looks from two perspectives at emerging trends and business models in a CE to sketch next steps towards the transition in a selection of central sectors. Conclusions are drawn on the basis of the insights gained by the preceding chapters.
Aufgrund der Wechselwirkungen mit sozialen, ökonomischen und ökologischen Zielen ist die Kreislaufwirtschaft möglicherweise ein Handlungsbereich mit systemischer Schubkraft für die integrierte Nachhaltigkeitsentwicklung von NRW. Sie ist deswegen auch für die Umsetzung der NRW-Nachhaltigkeitsstrategie, die 2016 zum ersten Mal aufgelegt und 2020 aktualisiert wurde, von besonderem Interesse. Aus diesem Grund hat sich das Wuppertal Institut im Rahmen des Forschungsprojekts "Nachhaltigkeitsstrategie NRW - Vertiefungsanalysen zur Umsetzung aus wissenschaftlicher Sicht" in einem Forschungsmodul mit der Umsetzung der Kreislaufwirtschaft im Kontext der Gesamtwirtschaft von NRW beschäftigt und hier insbesondere die Auswirkungen des europäischen, politischen Rahmens auf die Aktivitäten in NRW in den Blick genommen. Mit anderen Worten, das nachfolgende Arbeitspapier nimmt den European Green Deal und seine Bedeutung für NRW in den Blick und fragt: Welche Herausforderungen für NRW lassen sich aus dem Green Deal ablesen, wie und in welchen Sektoren kann/soll NRW eine Transformation zur Kreislaufwirtschaft einleiten und welche Bedingungen müssen dabei beachtet werden? Methodisch basiert diese Auswertung auf der Analyse relevanter Primärdokumente sowie der Sekundärliteratur zur Umsetzung der Kreislaufwirtschaft im politischen Mehrebenensystem. Dabei soll das Papier kein industriepolitisches Innovationsprogramm entwerfen, sondern eine Handreichung zur weiteren Diskussion von potenziellen Maßnahmen und Politikvorschlägen im Hinblick auf die zu entwickelnde Kreislaufwirtschaftsstrategie darstellen.
The construction sector is the second largest area for the application for plastics. Due to the long life times of construction products, the implementation of the circular economy faces its own challenges. To investigate this challenge, the study covers a market study for Germany, voluntary take-back and recycling schemes of construction products, as well as the use of plastic recyclates in construction products. In addition, plastic packaging of construction products is covered. Opportunities and barriers to the use of recycled plastics in construction products are derived from the intersection of available technologies, recyclate supply, and technical requirements for construction products. The report concludes with recommendations to various stakeholders on how to promote the use of recyclates in construction products and their packaging. Important points here are the introduction of a recyclate quota for films as construction product packaging and the description of recycling possibilities and recyclate content in the technical documentation of construction products.
This study presents in detail: the use of plastic products and the opportunities for recyclate use in the construction sector, quantities of plastic used, take-back systems, recycling techniques, current recyclate use and plastic construction product packaging.Potentials for increasing high-quality recyclate use were identified. Existing hurdles and options for action for industry and politics are presented. Current recyclate use as well as its potential use are strongly dependent on the application area of plastics. The biggest hurdles for the use of recycled materials are product life time, dismantling and technical requirements.
In dieser Studie werden detailliert dargestellt: die Verwendung von Kunststoffprodukten und Möglichkeiten des Rezyklateinsatzes im Baubereich, verwendete Kunststoffmengen, Rücknahmesysteme, Verwertungstechniken, aktueller Rezyklateneinsatz und Bauproduktverpackungen aus Kunststoff. Potentiale zur Steigerung des hochwertigen Rezyklateinsatzes wurden identifiziert und bestehende Hürden und Handlungsoptionen für Politik und Wirtschaft dargestellt. Aktueller Rezyklateinsatz sowie technische und mengenmäßige Potentiale sind stark abhängig vom Einsatzbereich der Kunststoffe. Die größten Hürden für einen Rezyklateinsatz sind dabei Produktlebensdauer, Rückbaufähigkeit und technische Anforderungen.
This paper analyses the potential of digital information technology to enable the reliable provision of product information along the plastics supply chain. The authors investigate the possible contribution of a product passport equipped with decentralised identifiers and verifiable credentials to overcome information deficits and information asymmetry in the circular plastics economy. Through this, high-quality plastics recycling could be enabled on a larger scale than currently possible.
Ziel dieses Berichts im Rahmen des Projekts "Erfolgsbedingungen für Systemsprünge und Leitbilder einer Ressourcenleichten Gesellschaft" ist es, eine solche Ressourcenleichte Gesellschaft zu definieren. Hierzu wird zunächst der Rahmen für eine Ressourcenleichte Gesellschaft durch Aufbereitung der relevanten Diskurse bestimmt. Kapitel 1 zeichnet die zeitgeschichtliche Entwicklung des ressourcenbezogenen Nachhaltigkeitsdiskurses von 1972 bis in die Gegenwart nach. Aus dieser Analyse werden relevante Gesichtspunkte für eine Ressourcenleichte Gesellschaft identifiziert und am Ende des Kapitels in einer Übersicht dargestellt. Das zweite Kapitel entwickelt darauf aufbauend den bereits genannten definitorischen Rahmen, d.h. es erfolgt eine grundsätzliche Erarbeitung der normativen Kriterien, die eine solche Gesellschaft ausmachen sollte. Kapitel 3 skizziert dann existierende Zugänge zur Ressourcenleichten Gesellschaft und zeigt wichtige Merkmale dieser Ansätze auf, welche zur Entwicklung der Ressourcenleichten Gesellschaft durch Kontrastierung oder Übernahme von Merkmalen beitragen können.
Digitale Treffen, Videokonferenzen, Streaming - die Coronakrise hat unseren beruflichen und privaten Alltag mit einem Schlag in virtuelle Räume katapultiert und die Digitalisierung vorangetrieben. Daraus lassen sich auch Lehren für den Einsatz von digitalen Technologien für die nachhaltige Entwicklung ziehen.
Der vorliegende Bericht fasst die Inhalte des Projekts "Erfolgsbedingungen für Systemsprünge und Leitbilder einer Ressourcenleichten Gesellschaft" im Überblick zusammen und diskutiert diese. Er stellt damit den ersten Band der Berichte zu diesem Projekt dar. Nach einer Einführung wird die Ressourcenleichte Gesellschaft als ressourcenschonende, weitgehend dematerialisierte Gesellschaft mit hoher Lebensqualität definiert. Es folgt eine Vorstellung der Methodik bei der Leitbildentwicklung und die Skizzierung der Leitbilder selbst. Daraufhin werden die Ergebnisse von Diskussionen zu den Leitbildern mit Expertinnen und Experten in sogenannten Stakeholder-Workshops auf der einen Seite sowie mit Vertreterinnen und Vertretern der verschiedenen sozialen Milieus in Fokusgruppen und einer moderierten Online Community auf der anderen Seite dargestellt.
Digital platforms may yield a host of advantages in putting circular economy into effect. This paper analyses the related chances and discusses requirements of digital platforms for the realization of a circular economy. It specifically points to potential solutions offered by digital platforms for existing barriers. From there it identifies issues that need specific attendance to create economically and ecologically functional platforms. Three economically relevant perspectives are discussed for this: a management perspective, a legislative perspective and a social/systems perspective.
In diesem Bericht wird das Wohngebäudemodell der Abteilung Kreislaufwirtschaft des Wuppertal Instituts präsentiert. Der Bericht zielt darauf ab, die Materialströme, die durch Abriss, Neubau, Sanierung und Austausch im Wohngebäudesektor des Bundeslandes Nordrhein-Westfalen während des Zeitraums von 2022 bis 2060 verursacht werden, abzuschätzen. Das Modell verknüpft dabei Angaben zu tatsächlichen Wohngebäudezahlen, entnommen aus den Daten des Statistischen Bundesamts und der Zensuserhebung 2011, mit typischen Baumaterialien je Gebäudetyp und Baujahr. Die Gebäudetypologie basiert dabei auf Arbeiten des Instituts für Wohnen und Umwelt. Bis zum Jahr 2060 können so über Festlegung von Abriss-, Neubau- und Sanierungsraten sowie Austausch einzelner Bauteile mögliche Materialströme des Landes NRW im Wohnbausektor modelliert werden.
Mit verschiedenen Wohnbauoffensiven versuchen viele Kommunen dem vorherrschenden Wohnraummangel entgegenzuwirken. Der Neubau von Häusern nimmt viel Fläche in Anspruch und verbraucht viele Ressourcen. Dabei lässt sich ein Großteil des Wohnraumbedarfs durch bestehende Wohngebäude decken, wenn sich Menschen an biografischen Wendepunkten, wie etwa Auszug der Kinder, für kleinere Wohnflächen und alternative Wohnkonzepte entscheiden würden.
Das Projekt OptiWohn ging darum der Frage nach, wie eine optimierte Nutzung der Wohnfläche proaktiv gefördert werden kann. Herzstück bildet die Entwicklung und Gründung von kommunalen Wohnraumagenturen. Sie identifizieren Wohnraumbedarfe im Quartier, bieten Beratung für Wohnungssuchende an, vermitteln alternative Wohnungen oder initiieren Angebote zum Wohnungstausch.
Neben dem Beratungs- und Förderangebot zur Optimierung der Wohnflächennutzung in den Städten Köln, Göttingen und Tübingen wurden die Ergebnisse in kommunale Handlungsempfehlungen übertragen, die neben Städten und Kommunen auch weitere Akteure ansprechen sollen. Darüber hinaus entwarfen die Wissenschaftlerinnen und Wissenschaftler ein bundesweites Förderprogramm für flächeneffizientes Wohnen.
A main goal of this study - which also functions as deliverable 210078-D07 of the Circular Economy Beacons (CEB) project - is to evaluate currently available frameworks that measure and operationalise Circular Economy (CE), with a particular focus on the urban context. The regional focus lies on the Western Balkan region, which is at the centre of the project. Such "Urban Circularity Hotspot Frameworks" (UCHF) aim at providing decision support for policy makers, companies, citizens etc. regarding the transition to CE within cities. Based on the analysis of different frameworks, suggestions are derived regarding UCHF suitable for the specific characteristics of Western Balkan municipalities, i.e. a Circular Economy Beacons Urban Circularity Hotspot Framework (CEB-UCHF) ready for short-term implementation.
By use of macro-economic model EXIOMOD, the expected impacts of actions described in the Strategic Research and Innovation Agenda (SRIA) have been analyzed. The results of this analysis show that the R&I actions described in the SRIA contribute to decoupling economic growth from resource use. The actions are expected to cause an increasing gross domestic product and a decreasing raw material demand. This results in an increasing extracted resource productivity, a measure used to show the decoupling of economic growth and resource use. It can however be questioned whether the actions in the SRIA - or the measures implemented in the model - assume a strong enough pace for decoupling economic growth and material use. The actions contribute to the climate goals of the European Commission, by showing a pathway through which the emissions of greenhouse gas can be reduced.
Diese Kurzstudie ist Teil des Verbundvorhabens "Circular Economy als Innovationsmotor für eine klimaneutrale und ressourceneffiziente Wirtschaft (CEWI)" der Stiftung 2°, dem WWF Deutschland und dem Wuppertal Institut und hat zum Ziel, die Potenziale des Automobilsektors und der dazugehörigen Wertschöpfung im Hinblick auf die Umsetzung von zirkulären Ansätzen zu analysieren und den Beitrag zur Ressourceneinsparung und dem Klimaschutz zu bewerten.
Das Ergebnis dieser Kurzstudie leitet sich aus einem intensiven Bewertungsprozess verschiedener Maßnahmen-Cluster ab und besteht aus sechs Handlungsfeldern, die ein Potenzial für den Ausbau von Klimaneutralität und Ressourceneffizienz im Automobilsektor aufweisen. Diese Handlungsfelder bilden die Grundlage für den weiteren Projektverlauf von CEWI, in dem Akteure aus der Praxis in Workshops gemeinsam Pilotprojekte modellieren werden.
Diese Kurzstudie ist Teil des Verbundvorhabens "Circular Economy als Innovationsmotor für eine klimaneutrale und ressourceneffiziente Wirtschaft (CEWI)" der Stiftung 2°, dem WWF Deutschland und dem Wuppertal Institut und hat zum Ziel, die Potenziale des Gebäudesektors und der dazugehörigen Wertschöpfung im Hinblick auf die Umsetzung von zirkulären Ansätzen zu analysieren und den Beitrag zur Ressourceneinsparung und dem Klimaschutz zu bewerten.
Das Ergebnis dieser Kurzstudie leitet sich aus einem intensiven Bewertungsprozess verschiedener Maßnahmen-Cluster ab und besteht aus sechs Handlungsfeldern, die ein Potenzial für den Ausbau von Klimaneutralität und Ressourceneffizienz im Gebäudesektor aufweisen. Diese Handlungsfelder bilden die Grundlage für den weiteren Projektverlauf von CEWI, in dem Industrieakteure in Workshops gemeinsam Pilotprojekte modellieren werden.
In Deutschland werden jährlich über sieben Millionen gebrauchte Matratzen entsorgt, die überwiegend verbrannt und nur zu einem Bruchteil recycelt werden. Dieser lineare Ansatz belastet die Ressourcen, erhöht die Emissionen und birgt Umweltrisiken. Um diesen Herausforderungen zu begegnen, kann die erweiterte Herstellerverantwortung (Extended Producer Responsibility, EPR) als Instrument zur Umsetzung einer Kreislaufwirtschaft dienen. In dieser Masterarbeit wird daher untersucht, wie ein EPR-System für Matratzen in Deutschland gestaltet sein sollte, um Kreisläufe effizient zu schließen. Gleichzeitig zielt diese Thesis darauf ab, die damit verbundenen Anforderungen und Herausforderungen bei der Umsetzung eines solchen Systems zu identifizieren.
Zur Beantwortung der Forschungsfragen wurden mithilfe von Expert*innen-Interviews und einer umfassenden Literaturrecherche drei EPR-Modelle entwickelt und anhand von ausgewählten Kriterien bewertet. Die Ergebnisse der Bewertung ergaben, dass ein Modell präferiert werden sollte, in dem eine sogenannte Producer Responsibility Organisation (PRO) gebündelt die Verantwortung der Hersteller übernimmt. Ein solches System würde unter anderem eine angemessene Kontrolle ermöglichen und Anreize für Forschung und Entwicklung im Bereich der Recyclingtechnologien und des zirkulären Designs der Matratzen schaffen. Obwohl die Datenlage über Altmatratzen und deren Verwertung in Deutschland derzeit noch begrenzt sind und die hier präsentierten Ergebnisse von der gewählten Methodik abhängen, dient diese Masterarbeit als erste Grundlage für die weitere Entwicklung eines EPR-Systems für Matratzen in Deutschland.
With the introduction of the Roadmap to a Resource Efficient Europe (2011) and the more recent commitment of The Action Plan towards the Circular Economy (2015), the European Commission (EC) has expressed its fundamental interest to substantially improve the resource efficiency of the European economy and enable the transition towards the Circular Economy (CE). This policy push has meanwhile been complemented by some quite ambitious national programmes for RE and CE and institutional advances but it is not yet bound to targets or mandatory reporting.
Against this background, the objective of this paper is to give a comprehensive overview of the current policy frameworks at EU and a selection of MSs and provide insights into the elements shaping policy processes. The analytical framework relies on three essential interconnected components: the policy framework, the economic incentive system and economic side policies which are relevant in the context of RE and CE and actor constellations. The paper does this looking at the interface between EU-MSs. The analysis is based on different empirical surveys in which the policy development is observed and discussed (EEA 2011, 2016a, 2016b, EIO 2013, 2014, 2016) and a comprehensive review of legislative and policy frameworks at the EU and selected MSs, undertaken as part of the project POLFREE (Policy option for a Resource-Efficient Economy) (Domenech et al., 2014, Bahn-Walkowiak et al., 2014). The analysis reveals that policy frameworks for RE/CE are complex and fragmented as competing goals and visions reduce effectiveness of measures. The paper makes recommendations as to how EU and MS policies could improve RE in a coordinated way, but recognizes that achieving such coordination will be challenging in the current political context.
Seitdem Einweg-Plastikartikel wie Kunststofftüten und Strohhalme verboten wurden, sind Straßen und Strände sauberer geworden. Zudem wurde auch die öffentliche Diskussion über nachhaltigen Konsum intensiviert. Die Gesamtmenge an Kunststoff-Abfällen ließ sich mit "Plastikverboten" hingegen nicht signifikant reduzieren. Zu diesem Ergebnis kommt der vorliegende Polyproblem-Report der gemeinnützigen Röchling Stiftung und des Beratungshauses Wider Sense in Zusammenarbeit mit dem Wuppertal Institut. Die Autor*innen haben die Wirkung staatlicher Verbote von Einweg-Plastikprodukten unter die Lupe genommen und die Erfahrungen aus Deutschland, Kenia und Kalifornien analysiert.
Die Wirtschaftsleistung von Deutschland ist durch die Corona-Pandemie stark beeinträchtigt. Um die Wirtschaft zu beleben, einigten sich die Regierungsparteien am 3. Juni 2020 in ihrem Koalitionsausschuss auf ein "Konjunktur- und Krisenbewältigungspaket" sowie ein "Zukunftspaket" in Höhe von insgesamt 130 Milliarden Euro. Für 2020 und 2021 sind fast 60 Maßnahmen vorgesehen, die von steuerlichen Vergünstigungen bei der Mehrwertsteuer bis hin zu konkreten Investitionen in Zukunftstechnologien reichen. Mit Blick auf den Klimaschutz beinhaltet das Maßnahmenpaket der Großen Koalition zwar gute Ansätze und viele wichtige Impulse, die allerdings zu verpuffen drohen, wenn sie nicht durch eine konsequente und nachhaltig ausgerichtete Klimapolitik flankiert werden. Zudem fehlen für den Klimaschutz wichtige Bereiche, wie Investitionen in die Kreislaufwirtschaft. Außerdem werden Maßnahmen zur Steigerung der Energieeffizienz nur unzureichend berücksichtigt. Gerade in diesen Bereichen hätten sich konjunkturbelebende Effekte und Klimaschutz in idealer Form ergänzen können, kritisiert das Wuppertal Institut. Dieses Diskussionspapier reagiert auf die vorliegenden Vorschläge und fasst zusammen, welche Maßnahmen im Rahmen der jetzt anstehenden Umsetzungsphase nachgebessert werden sollten und wo Ergänzungen notwendig sind.
Transformative Innovationen : die Suche nach den wichtigsten Hebeln der Großen Transformation
(2021)
Der hier vorliegende Zukunftsimpuls soll den Grundgedanken der Transformativen Innovationen und ihre Notwendigkeit beschreiben sowie erste Kandidaten für solche Transformativen Innovationen aus diversen Arbeitsbereichen des Wuppertal Instituts vorstellen. Er dient vor allem als Einladung, gemeinsam mit dem Wuppertal Institut über solche Innovationen zu diskutieren, die irgendwo zwischen den großen Utopien und kleinen Nischenaktivitäten liegen. Denn es braucht nicht immer den ganz großen Wurf, um Veränderungen in Gang zu setzen.
This report is a deliverable of the project "Bridging the raw materials knowledge gap for reuse and remanufacturing professionals" (ReUK) and of the second work package "Identification of knowledge gaps and industry needs". Funded by the Knowledge and Innovation Community for Raw Materials, ReUK will develop life-long education services tailor-made for the needs of the reuse- and remanufacturing sector in Europe. The present "Report on ten knowledge gaps" represents a further key step in delivering these services.
The transition to a greener and more circular economy has been a European policy priority for several years. The Circular Economy Action Plan of 2020 underlines the ambition. The following EEA initiatives are meant to support the transition process:
- Bellagio Process on circular economy monitoring principles (EPA network);
- Enhancement of EEA indicators on circular economy (ETC/WMGE);
- Explorative work on novel data streams (FWC);
- Co-creation work - knowledge sharing of monitoring experience (ETC/Eionet).
The scope of the present task was to report on the co-creation process that was undertaken at the end of 2020. The co-creation process was organised to identify:
(i) best practices on monitoring strategies, data sources and target setting; and
(ii) areas of circularity measuring and monitoring that remain challenging and require additional investment.
The co-creation process partially built on the work done during the Bellagio Process/Initiative which was run in parallel. This ETC report presents and documents the evidence gathered throughout the co- creation process as well as providing a retrospective analysis of the links to the Bellagio Principles.
Im Rahmen des Projektes werden mögliche Bewertungsmaßstäbe für die Erfolgsmessung von Abfallvermeidungsmaßnahmen vertiefend analysiert und bewertet sowie ein passendes Set an Indikatoren erarbeitet und ein geeignetes Daten-Erfassungskonzeptes entwickelt. Bezogen auf das Datenerfassungskonzept gibt es im Bereich Wiederverwendung (WV) erhebliche Datenlücken zu den tatsächlich wiederverwendeten Mengen gebrauchter Produkte. Der vorliegende Zwischenbericht enthält die Ergebnisse einer ersten Datenerhebung auf Basis einer Befragung der 400 Wiederverwendungseinrichtungen in Deutschland. Ergänzend wurde das Potential der aus Online-Angeboten gewinnbaren Gebrauchtprodukte zur WV recherchiert.
Digital product passport : the ticket to achieving a climate neutral and circular European economy?
(2022)
The introduction of a Digital Product Passport (DPP) is an opportunity to create a system that can store and share all relevant information throughout a product's life cycle. This would provide industry stakeholders, businesses, public authorities and consumers with a better understanding of the materials used in the product as well as their embodied environmental impact.
With the COVID-19 pandemic, the Russian invasion of Ukraine and the cost-of-living crisis, now is a critical moment to transform our economic and business models, while also addressing the huge scale of material emissions. DPPs can be a pivotal policy instrument in this goal. Furthermore, DPPs can accelerate the twin green and digital transitions as part of EU efforts to deliver positive climate action and sustainable economies.
In 2020, the European Commission (EC) adopted a new Circular Economy Action Plan (CEAP), which emphasised the need for circular economy initiatives to consider the entire life cycle of products, from the production of basic materials to end-of-life disposal. The Circular Economy Package published in March 2022 includes a proposal for an Ecodesign for Sustainable Products Regulation (ESPR), which builds upon the Ecodesign Directive that covers energy-related products.
A DPP will form a key regulatory element of the ESPR by enhancing the traceability of products and their components. This will provide consumers and manufacturers with the information needed to make better informed choices by taking their environmental impact into consideration.
As discussed in the report, there is widespread agreement amongst business leaders that a well-designed DPP could have both short- and longer-term benefits, improving access to reliable and comparable product sustainability information for businesses, consumers and policymakers.
A well-designed DPP can unify information, making it more readily accessible to all actors in the supply chain. This will support businesses to ensure an effective transformation towards a decarbonised industry. It could also create incentives for companies to make their products more sustainable, as improving access to reliable and consistent information across supply chains will make it easier for customers to make comparisons.
At the end of March 2022, the European Commission published its new EU Strategy for Sustainable and Circular Textiles. Its ambitious vision is to reduce textile waste, promote circular measures and minimise the negative environmental impacts of the textile industry. But what would a textile industry that keeps textiles in a closed loop look like, and what political conditions would be required in Germany? This Zukunftsimpuls paper by the Wuppertal Institute points to the role that Germany could play in the transformation towards a circular textile industry.
Ende März 2022 veröffentlichte die Europäische Kommission ihre neue EU-Strategie für nachhaltige und zirkuläre Textilien. Die ambitionierte Vision: Textilabfälle sollen reduziert, zirkuläre Maßnahmen gefördert und negative Umweltfolgen der Textilindustrie minimiert werden. Doch wie sieht eine Textilwirtschaft, die Textilien im Kreislauf führt, aus und welche politischen Anforderungen ergeben sich daraus für Deutschland? Der vorliegende Zukunftsimpuls des Wuppertal Instituts zeigt, welche Position Deutschland in der Transformation hin zu einer zirkulären Textilindustrie einnehmen könnte.
Kreislaufwirtschaft beschreibt ein Konzept, bei dem Abfall und Verschmutzung nicht per se im Wirtschaftsdesign vorausgesetzt werden. Sie greift damit die Ursachen der derzeit global dringlichsten Querschnittsthemen nachhaltiger Entwicklung mit dem Ziel auf, verantwortungsvoll mit Ressourcen, Wertstoffen, Produkten und der Umwelt umzugehen. Entstehen soll damit eine Welt, in der kein Müll produziert wird. Das Konzept verfolgt dabei einen multidimensionalen Ansatz und umfasst alle Wirtschaftsbereiche - von der Ressourcengewinnung über die Produktion, die Lagerung und den Konsum bis hin zur Entsorgung beziehungsweise zum Recycling. Mithilfe der Kreislaufwirtschaft können multiple Nachhaltigkeitsziele der Agenda 2030 schneller erreicht werden, weshalb sie als ein zentraler Baustein nachhaltiger Entwicklung gilt.
Addressing food waste prevention is one target of the Sustainable Development Goals (SDGs) and a major task for the UN Environmental Programme and the European Commission. It is promising in terms of its environmental saving potential. However, it also leads to consumers being able to save money, which they then are likely to spend, thus again causing a negative environmental impact. This dimension of the so-called indirect rebound effect, which prevents the desired ecological benefits from being achieved, is investigated in this paper. By using a single-region environmentally extended input-output model from a production perspective, the indirect rebound effects from food waste prevention in Germany are analysed. Any political action needs to consider not only a differentiation in income class, but also alternative concepts such as the principles of sufficiency in order to achieve all ecological benefits and specifically the third target of SDG 12.
A large number and variety of activities are being undertaken to introduce Digital Product Passports (DPPs). However, only a few DPPs have made it into practice so far, so there is some uncertainty about which impact DPPs will actually have. With this paper, we aim to provide a structured overview of the current development of DPPs. We provide insights of 76 current corporate, policy, and research activities that exist and their objectives. To allow for a structured assessment and discussion of the diverse approaches we defined 13 criteria for a comparable description, categorization and evaluation. We expect that this overview will not only encourage feedback and contributions from the DPP community, as well as valuable discussions with and among experts. It is also intended to help promote and facilitate the adoption of DPPs for the Circular Economy by facilitating collaborations and suggestions for ongoing activities.
The Digital Product Passport (DPP) is a concept for collecting and sharing product-related information along the life cycle of a product. DPPs are currently the subject of intense discussion, and various development efforts are being undertaken. These are supported by regulatory activities, especially in the case of the battery passport. The aggregation of product life-cycle data and their respective use, as well as the sharing of these data between companies, entrepreneurs, and other actors in the value chain, is crucial for the creation of a resource-efficient circular economy. Despite the urgent need for such a solution, there is currently little attention given to the digital infrastructure for the creation and handling of the DPPs (i.e., the so-called DPP system). Moreover, there is so far no common understanding of what the requirements for a DPP system are. This is the background and underlying motivation of our paper: we identify the requirements for a DPP system in a structured way, i.e., based on stakeholder involvement and current literature from science and industry. In addition, we compose, categorize, and critically analyze the results, i.e., the list of requirements for DPP systems, in order to identify gaps. Summarized, our research provides insights into the criteria to be considered in the creation of an actual DPP system.
Accelerating circular economy solutions to achieve the 2030 agenda for sustainable development goals
(2022)
Circular economy seems a vital enabler for sustainable use of natural resources which is also important for achieving the 2030 agenda for sustainable development goals. Therefore, a special session addressing issues of "sustainable solutions and remarkable practices in circular economy focusing materials downstream" was held at the 16th International Conference on Waste Management and Technology, where researchers and attendees worldwide were convened to share their experiences and visions. Presentations focusing on many key points such as new strategies, innovative technologies, management methods, and practical cases were discussed during the session. Accordingly, this article compiled all these distinctive presentations and gave insights into the pathway of circular economy towards the sustainable development goals. We summarized that the transition to circular economy can keep the value of resources and products at a high level and minimize waste production; the focus of governmental policies and plans with the involvement of public-private-partnership on 3Rs (reduce, reuse, and recycle) helps to improve the use of natural resources and take a step ahead to approach or achieve the sustainability.
Mit dem Ziel, das Kunststoffrecycling weiter zu steigern, wurden in diesem Vorhaben die Verfahren und Prozesse der werkstofflichen Verwertung von Kunststoffabfällen in den Blick genommen - von der Sortierung über die Aufbereitung bis hin zu einem erneuten Einsatz in der Produktion. Ausgehend von der Beschreibung des Standes der Technik wurden mögliche, innovative technische Optimierungspotenziale identifiziert und dargestellt, die zur Verbesserung der Rezyklatqualitäten und ihren Einsatzmöglichkeiten in Neuprodukten beitragen können. Für eine Bewertung der Umweltwirkungen der technischen Innovationen im Vergleich zum Stand wurden ökobilanzielle Berechnungen vorgenommen.
Mit dem Ziel, das Kunststoffrecycling weiter zu steigern, wurden in diesem Vorhaben die Verfahren und Prozesse der werkstofflichen Verwertung von Kunststoffabfällen in den Blick genommen - von der Sortierung über die Aufbereitung bis hin zu einem erneuten Einsatz in der Produktion. Ausgehend von der Beschreibung des Standes der Technik wurden mögliche, innovative technische Optimierungspotenziale identifiziert und dargestellt, die zur Verbesserung der Rezyklatqualitäten und ihren Einsatzmöglichkeiten in Neuprodukten beitragen können. Für eine Bewertung der Umweltwirkungen der technischen Innovationen im Vergleich zum Stand wurden ökobilanzielle Berechnungen vorgenommen.
Der vorliegende Beitrag analysiert die Bedeutung der Abfallvermeidung auf kommunaler Ebene. Besonderes Augenmerk liegt dabei auf der Rolle von Städten bei der Abfallvermeidung und der Notwendigkeit strategischer Konzepte sowie praktischer Umsetzungsstrategien. Es wird herausgearbeitet, dass das Initiieren von Abfallvermeidungsmaßnahmen auf kommunaler Ebene auf verschiedene Herausforderungen stoßen kann, wie beispielsweise die Abstimmung bestehender Konsum- und Entsorgungsmuster sowie das Fehlen geeigneter Anreize für Akteure. Es wird gezeigt, inwiefern der Ansatz der Zero Waste City ein Instrument zur Förderung der kommunalen Abfallvermeidung darstellen kann und welche Ziele und Maßnahmen die Zero Waste Cities Kiel und München in ihre Zero-Waste-Konzepte aufgenommen haben. Darüber hinaus werden Handlungsempfehlungen zur Stärkung der Abfallvermeidung in der Kommune, in der Verwaltung und in Bezug auf spezifische Abfallfraktionen präsentiert.
Abfallvermeidung steht an der Spitze der Abfallhierarchie und sollte daher mit höchster Priorität behandelt werden - auch in den Kreislaufwirtschaftspolitiken auf kommunaler Ebene. Ein Leitfaden mit 19 praxisorientierten Handlungsempfehlungen soll Kommunen nun unterstützen, Abfallvermeidung systematisch und erfolgreich umzusetzen.
Der Handlungsleitfaden ist ein Ergebnis des Projekts Circular Cities NRW: Das Wuppertal Institut hat gemeinsam mit der FernUniversität Hagen die 22 kreisfreien Städte in Nordrhein-Westfalen (NRW) sowie sechs internationale Referenzfälle in Bezug auf ihre Abfallvermeidungsmaßnahmen analysiert. Das Ergebnis: Die NRW-Städte gehen Abfallvermeidung zwar zunehmend an, allerdings bestehen große Unterschiede bei der Breite der Maßnahmen und den thematischen Schwerpunkten. Darüber hinaus haben die Forschenden viele nicht ausgeschöpfte Handlungspotenziale identifiziert.
Der Leitfaden enthält Maßnahmen, mit denen Kommunen Abfallvermeidung systematisch, verwaltungsweit, sektorenübergreifend und verknüpft mit anderen Klimaschutz- und Nachhaltigkeitsaktivitäten angehen können. Besonders interessant für die Kommunen: Einige der Handlungsempfehlungen sind einfach umzusetzen, kostengünstig und ermöglichen schnelle Abfallvermeidungserfolge.
The rising popularity and strong increase in the number of electric bicycles make it necessary to consider the built-in resources as well as possible treatments after the use phase. The time lag between the purchase and the occurrence of relevant defects suggests significant increases in defective components. Especially the great dynamics of the market due to regular innovations, product renewals, and the lack of spare parts availability for older models make the long-term use by customers much more difficult than for conventional bicycles. Therefore, it is necessary to analyze circular business models for the electric bicycle market. In this way, the required structures for a sustainable electric bicycle industry can be created so that valuable materials do not go into disposal but undergo a new use phase. Based on the results of "AddRE-Mo-Value Preservation Scenarios for Urban Electromobility of Persons and Loads through Additive Manufacturing and Remanufacturing," a research project funded by the German Federal Ministry of Education and Research, this paper addresses four circular business models, two sales models, and two service models. The guiding research interest of this paper is the combination of remanufacturing and additive manufacturing from a business model perspective, analyzing the extent to which additive remanufacturing can be considered a solution for electric bicycles' circularity. After describing the approach and methods used to develop these four circular business models the business models are described and analyzed using the Business Model Canvas. Based on this analysis, it is shown that the combination of remanufacturing and additive manufacturing can be applied to the electric bicycle market and be integrated into both sales and service models. The description of these business models will help managers design viable business models in the context of sustainable electric bicycles. It also shows that the individual partners within the value chain must collaborate more closely. In the electric bicycle industry, a single company will probably not be able to close the product cycle completely. Further research is needed to develop concepts of the business models and examine their practical feasibility in technical and organizational operations to achieve a circular economy.
Auf dem Weg zu einer ressourceneffizienten Gesellschaft bedarf es richtiger Rahmenbedingungen, Informationen und Handlungsalternativen. Eine Möglichkeit, diese Voraussetzungen zu schaffen, ist ein kommunales Zero-Waste-Konzept. Zero Waste lässt sich übersetzen mit "Null Abfall, null Verschwendung" und verfolgt das Ziel, möglichst wenig Abfall zu produzieren sowie effizient und sparsam mit Ressourcen umzugehen. Ein solches Konzept wie in Kiel ist die Basis für eine Zertifizierung als Zero Waste City, eine Auszeichnung, die der europäische Verein Zero Waste Europe vergibt. 2007 wurde die italienische Gemeinde Capannori zur ersten Zero Waste City in Europa erklärt, seitdem sind knapp 400 europäische Gemeinden dieser Bewegung gefolgt.