Wärmewende im Quartier
(2016)
Im Rahmen der Energiewende haben sich erneuerbare Energien zur Stromerzeugung in Deutschland bereits etabliert. Um jedoch das volle Potenzial der Reduktion von fossilen Energien und Treibhausgasen (THG) auszuschöpfen, muss aus der Energiewende auch eine Wärmewende werden. Der Energieeinsatz für die Wärmebereitstellung der Industrie betrug im Jahr 2012 etwa 535 TWh (22 % des Endenergiebedarfs Deutschlands), hauptsächlich bereitgestellt durch Erdgas (48 %) und Steinkohle (17 %) 1. Damit wurden für die Wärmebereitstellung im Industriesektor rund 159 Mio. t CO2-äq emittiert, was 17 % der THG-Emissionen Deutschlands entspricht.
Aufgrund der Vielseitigkeit der einzelnen Branchen und Wärmeanwendungen im Industriesektor kann dieser Beitrag nur beispielhaft einzelne Komponenten für eine Wärmewende aufzeigen, die auch wiederum die Aktivitäten der einzelnen Autoren widerspiegeln. Ausgehend von einer nationalen Betrachtung und expliziten Modellierungsergebnissen für die energieintensive Industrie in NRW, werden einzelne Potenziale und Aktivitäten im Bereich der Wärmebereitstellung, -speicherung und -integration behandelt.
Das Energiesystem der Zukunft wird stark durch Elektrifizierung geprägt sein. Für die Langzeitspeicherung von Energie sowie für Bereiche, die sich nicht sinnvoll durch Strom defossilieren lassen, werden aber auch in Zukunft chemische Energieträger benötigt. Das Ziel der Klimaneutralität bedingt, dass diese Energieträger vollständig emissionsfrei aus erneuerbaren Energien (EE) hergestellt werden. Diese grünen Energieträger sind transportier- und handelbar, sodass sich ein internationaler Markt für grünen Wasserstoff und seine Folgeprodukte entwickeln wird.
Derzeit gibt es diesen Markt noch nicht. Grüner Wasserstoff ist preislich noch nicht konkurrenzfähig gegenüber fossilen Brennstoffen. Den größten Anteil am Wasserstoffpreis haben die Kosten für die Elektrolyseanlage sowie die Kosten für die Strombereitstellung. Die besten Bedingungen für die Wasserstoffproduktion bieten daher EE-Standorte und Technologien mit hohen Volllaststundenzahlen, an denen auch der Elektrolyseur bei wenig EE-Abregelung auf viele Betriebsstunden kommt.
Die Transformation des Energieversorgungssystems zu einer dekarbonisierten Energiebereitstellung bedingt ein koordiniertes Zusammenspiel der Sektoren Strom, Wärme und Verkehr. Dabei ist die Kopplung des Stromsektors mit dem Wärmesektor eine der entscheidenden Maßnahmen bei der Transformation. Die Aufnahme von Wind- und Sonnenenergie in das Netz kann durch genaue Einspeiseprognosen optimiert werden, die Kopplung zum Wärmesektor mittels Wärmepumpen und Power-to-Heat (Heizstab) ermöglicht die weitere Flexibilisierung der Nachfrageseite. Diese Interaktion wird durch intelligente Lösungen der Systemtechnik für das Energie- und Netzmanagement ermöglicht. Die Entwicklung von entsprechenden Anreizsystemen, Marktmechanismen und Geschäftsmodellen ist ebenfalls erforderlich, um diese Kopplung auch wirtschaftlich erfolgreich zu gestalten. Der Beitrag stellt das im Forschungsvorhaben "Interaktion EE-Strom, Wärme und Verkehr" erstellte 80-Prozent-Szenario für das Jahr 2050 vor und zeigt anhand von Beispielen zukünftige Anforderungen und Entwicklungen zu dieser Thematik auf.
As many other countries, Germany misses to exploit most of its large potential for cost-effective energy efficiency improvements. An organisation collecting funds and allocating them to the most (cost-)effective programmes could be a solution.
Therefore, political parties and trade unions as well as environmental NGOs have called for the creation of such an Energy Efficiency Fund. A recent study by the Wuppertal Institute together with a number of partners, commissioned by the Hans Böckler Foundation, analysed the feasibility of such an institution.
It has been the objective of the project, completed in March 2005, to
identify the added value of an Energy Efficiency Fund,
develop concrete proposals for the institutional setting and the financing of an Energy Efficiency Fund in Germany,
prepare and assess the benefits and costs of a portfolio of innovative but realistic energy efficiency programmes and campaigns, which the Energy Efficiency Fund would implement,
identify the effects of the fundraising and the programmes on different industries, particularly on the suppliers of energy-efficient technologies and services, and on their growth and employment perspectives,
estimate the net employment effects of such an Energy Efficiency Fund and its activities.
This paper presents the results and assesses the usefulness of the project and the participatory elements for increasing the acceptance of such a policy instrument.
The European Horizon 2020-project COMBI ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe") aims at estimating the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in the year 2030. The project goal is to cover the most important technical potentials identified for the EU27 by 2030 and to come up with consistent estimates for the most relevant impacts: air pollution (and its effects on human health, eco-systems/crops, buildings), social welfare (including disposable income, comfort, health and productivity), biotic and abiotic resources, the energy system and energy security and the macro economy (employment, economic growth and the public budget). This paper describes the overall project research design, envisaged methodologies, the most critical methodological challenges with such an ex-ante evaluation and with aggregating the multiple impacts. The project collects data for a set of 30 energy efficiency improvement actions grouped by energy services covering all sectors and EU countries. Based on this, multiple impacts will be quantified with separate methodological approaches, following methods used in the respective literature and developing them where necessary. The paper outlines the approaches taken by COMBI: socio-economic modelling for air pollution and social welfare, resource modelling for biotic/abiotic and economically unused resources, General Equilibrium modelling for long-run macroeconomic effects and other models for short-run effects, and the LEAP model for energy system modelling. Finally, impacts will be aggregated, where possible in monetary terms. Specific challenges of this step include double-counting issues, metrics, within and cross-country/regional variability of effects and context-specificity.
What role do transaction costs play in energy efficiency improvements and how can they be reduced?
(2019)
Ex-ante policy evaluation requires a detailed understanding of how the subjects addressed by the policy react to its implementation. In the context of energy efficiency, policy measures typically aim at influencing investment decisions towards more efficient options.
As has been discussed widely in the context of the "energy efficiency gap", investments in energy efficiency improvements are frequently not conducted even though they seem cost-effective from a simple cost-benefit perspective, where transaction costs have been identified as one important barrier.
While transaction costs have been discussed widely from a conceptional perspective, empirical studies quantifying transaction costs and measures to reduce them are rare. This paper presents approaches, results and insights from a recently completed research project funded by the German Federal Energy Efficiency Center (BfEE), addressing transaction costs in various energy efficiency measures and the role of energy efficiency services to overcome the barrier.
We analyse a set of 11 energy efficiency investments covering private households, public institutions and the industry sector. We gather data on direct investment costs and energy cost savings and provide a detailed analysis of the various barriers and transaction costs associated with the implementation. We then analyse the costs of existing energy efficiency services using data provided by the BfEE. We compare the different cost elements and analyze the potential of energy efficiency services to reduce transaction costs.
We find that the role of transaction costs differs substantially between households, public institutions and companies and that the impact of energy efficiency services on transaction costs needs to be evaluated using different methodological approaches. We conclude that while data availability on disaggregated transaction costs is a major challenge, energy services can reduce transaction costs considerably.
What makes a good policy? : Guidance for assessing and implementing energy efficiency policies
(2013)
Which factors are crucial to successfully design and implement a "good practice" policy to increase the energy efficiency of buildings and appliances? This is one of the main challenges for the new web platform bigee.net that provides guidance on good practice policies.
In this paper we examine the question what "good practice" is by presenting a multi-criteria assessment scheme to analyse different policies worldwide.
The assessment scheme contains a set of criteria addressing key factors leading to the success of a policy as well as its outcomes: a good policy addresses all market players and barriers, avoids lost opportunities and lock-in effects, has ambitious and regularly updated energy efficiency levels, and spill-over effects. Other criteria are high energy savings and the calculated cost-effectiveness.
The assessment scheme provides a standardised data collection approach, which paves the way for both qualitative and quantitative evaluation. Furthermore, it can help policy-makers to transfer a successful policy.
The development of the scheme is based on a literature review of worldwide implemented policies and measures that promote energy-efficiency of buildings and appliances. Criteria were operationalized, including a ranking between 0 and 10. The ranking is a decisive factor whether the policy qualifies as good practice. To demonstrate the practicability of this scheme, the paper analyses a good practice example according to the assessment scheme: Energy-Efficient Refurbishment and Energy Efficient Construction programmes of the German public bank KfW.
Wasserelektrolyse und regenerative Gase als Schlüsselfaktoren für die Energiesystemtransformation
(2013)
For some time, 3D printing has been a major buzzword of innovation in industrial production. It was considered a game changer concerning the way industrial goods are produced. There were early expectations that it might reduce the material, energy and transport intensity of value chains. However for quite a while, the main real world applications of additive manufacturing (AM) have been some rapid prototyping and the home-based production of toys made from plastics. On this limited basis, any hypotheses regarding likely impacts on industrial energy efficiency appeared to be premature. Notwithstanding the stark contrast between early hype and practical use, the diffusion of AM has evolved to an extent that at least for some applications allows for a preliminary assessment of its likely implications for energy efficiency.
Unlike many cross-cutting energy efficiency technologies, energy use of AM may vary substantially depending on industry considered and material used for processing. Moreover, AM may have much greater repercussions on other stages of value chains than conventional cross-cutting energy efficiency technologies. In case of AM with metals the following potential determinants of energy efficiency come to mind:
- A reduction of material required per unit of product and used during processing;
- Changes in the total number and spatial allocation of certain stages of the value chain; and
- End-use energy efficiency of final products.
At the same time, these various streams of impact on energy efficiency may be important drivers for the diffusion of AM with metals. This contribution takes stock of AM with metals concerning applications and processes used as well as early evidence on impacts on energy efficiency and combine this into a systematic overview. It builds on relevant literature and a case study on Wire Arc Additive Manufacturing performed within the REINVENT project.
Domestic sustainability innovations are considered to play a key role for pathways to sustainable consumption. The paper shows how open innovation processes can lead to such sustainable innovations, by means of an experimental and interactive infrastructure. It presents how – based on results of the LivingLab project conducted at the Wuppertal Institute within a European Consortium (Lead TU Delft) - currently an extended Sustainable LivingLab approach is developed and applied in two joint research projects at national and international level. To conceptualise this approach, we refer to recent proceedings in innovation and sustainability research, i.e. practice theory to analyse sustainable product design. Focusing on technical solutions and individual behaviour while assuming people's needs as fixed entities, disregards the dynamics of everyday practices in which technologies themselves create needs. Therefore, the consumer's position should be strengthened through userdriven innovation. LivingLabs are combined lab-/household systems, which put the user, i.e. the home occupant, and value chain related actors (producer, handicraft, etc.) on centre stage in the innovation process. We introduce its research agenda and the Three Phases Model of research. We hypothesise that at the end of this userintegrated innovation process developed products have a higher chance of successful diffusion. To illustrate this, we show how the LivingLab infrastructure is employed for the German InnovationCity Ruhr and how it can promote the development of user-centred sustainable consumption strategies.
Questions regarding the societal impact of research, how to reach impact and what is needed to stabilize the effects are rising from various sides. Societal impact is seen as part of a social contract that exists between science and society. This entails that research must address pressing social issues which in turn implies a number of core challenges such as gathering evidence or the creation of actionable knowledge. The transdisciplinary research approach "real-world laboratory" is discussed as possible way to address and to overcome some of the challenges. A "real-world laboratory" currently being established in the city of Wuppertal serves as case study, linking conceptual and empirical investigations.
Der Wärmesektor hat einen Anteil von rund 55 Prozent am deutschen Primärenergieverbrauch, wobei der Anteil klimafreundlicher Wärmeerzeugung (erneuerbare Energien und Abwärmenutzung) bislang aber noch sehr gering ist und unter 20 Prozent liegt. Entsprechend sind die Potenziale zur Erschließung von Dekarbonisierungserfolgen im Wärmesektor besonders groß. Ein Gelingen der Wärmewende ist daher zwingende Voraussetzung dafür, dass die nationalen Klimaschutzziele erreicht werden.
Gerade Städte spielen auf Grund des hohen Energie- und Ressourcenverbrauchs, der hohen örtlichen Dichte von Infrastrukturen und durch die Vielzahl von Akteuren eine zentrale Rolle bei der Energiewende und für den Klimaschutz. So bilden beispielsweise gewachsene Strukturen im Bestand und hohe Nutzungsdichten potenzielle Restriktionen für die Integration von Technologien zur effizienten Nutzung erneuerbarer Energiequellen. Städtische Quartiere sind gleichzeitig der sinnvollste Umsetzungsmaßstab für integrierte innovative Systeme, da hier die größten Synergieeffekte zwischen Effizienzmaßnahmen und nachhaltiger Energieerzeugung erschlossen werden können.
Die Wärmewende ist als Teil der Energiewende ein gesellschaftliches Großprojekt. Für eine erfolgreiche Umsetzung benötigt die Wärmewende im Vergleich zur Stromwende vielfältigere und differenziertere Handlungsmechanismen. Es geht dabei nicht nur um den Ersatz fossiler Energieträger im Bereich der Wärmeversorgung durch regenerative Quellen, sondern vielmehr um einen systemischen Ansatz, der zudem eine stringente Forcierung von Energieeffizienzmaßnahmen, eine optimierte Verzahnung von Strom- und Wärmesystemen sowie eine zielgruppenspezifische Adressierung und Sensibilisierung von Akteursgruppen (hier: Kommunen, Privathaushalte, Industrie, GHD) erforderlich macht.
Szenarien spielten und spielen eine zentrale Rolle für die Gestaltung der Energiewende. Sie beschreiben dabei auf konsistente Weise die mögliche zukünftige Entwicklung des Systems unter bestmöglicher Berücksichtigung des aktuellen Wissens bezüglich des Systems, d.h. der internen Abhängigkeiten und Wechselwirkungen der Systemkomponenten, aber auch die Abhängigkeit der Systementwicklung von äußeren Faktoren. Damit liefern Szenarien Leitplanken für zentrale technisch-strukturelle, energiepolitische, ökonomische und gesellschaftliche Weichenstellungen, die einen zielgerichteten Transformationsprozess flankieren müssen.
Transformation in der Industrie : Herausforderungen und Lösungen für erneuerbare Prozesswärme
(2023)
Der Beitrag stellt Ergebnisse aus der "AG Industrielle Prozesswärme" des Thinktanks IN4climate.NRW in Zusammenarbeit mit dem wissenschaftlichen Kompetenzzentrum Sci4Climate.NRW vor. Hier wurde in einem mehrjährigen Stakeholder-Prozess unter Einbindung von Wissenschaft, Politik und Unternehmen der energieintensiven Industrie in NRW ein Diskussionspapier entwickelt, welches in einem "Vier-Stufen- Modell" eine aus gesamtsystemischer Sicht optimale Vorgehensweise zur Dekarbonisierung bzw. Defossilisierung industrieller Prozesswärme aufzeigt. Flankierend werden über die Koautor:innen Technologie-Beispiele innerhalb des "Vier-Stufen-Modells" aufgezeigt.
Toothless tiger? : Is the EU action plan on energy efficiency sufficient to reach its target?
(2007)
Motivated by, inter alia, the increasing energy prices, the security of energy supply and climate change, the new EU "Action Plan for Energy Efficiency: Realising the Potential" (EEAP), sets out the policies and measures required to be implemented over the next six years to achieve the EU's goal of reducing annual primary energy consumption by about 20 % by 2020. By increasing energy efficiency, the security of energy supply and the reduction of carbon emissions are also improved.
The paper will analyse the 20 % target of the new EEAP for the energy demand side by comparison with different recent energy scenarios for the EU. It will therefore review the recommended policies and measures and examine, in which energy demand sectors energy efficiency may be increased and to which extend. The main focus is whether the recommended policies and actions will be sufficient and which additional measures may be useful, if additional measures are needed.
After a wave of privatizations in the end of the 1990s, the electrical power supply of many municipalities in Germany has been returned into public hands. Many municipalities discover chances and possibilities for local action, which arise with remunicipalisation. The local policy-makers realize that remunicipalisation offers the opportunity of implementing an independent energy policy at local level which is critical in creating a transformation to a sustainable energy system based on energy efficiency and renewable energies. The municipal ownership allows a strong governance towards more political influence in the local energy market. In addition, there is a clear opinion of the population: 81 % of citizens surveyed say they trust their local municipal utility, compared to only 26 % who say they trust corporations (VKU-Survey, 2010). In summary, there are many good reasons for local politicians to establish their own municipal utilities. The payback for municipalities is tangible when the local utility focuses on reliably providing affordable energy rather than on increasing its returns. The new municipal power utilities stimulate competition and contribute to the renewal / restructuring of the traditional energy market.
The founding of 72 municipal utilities since 2005 leads us to ask for the reasons. The study reviews the German trend towards municipal ownership of local utilities, assessing their performance based on 10 targets related to the energy transition, climate protection, and the local economic impact: 1. Achieving environmental objectives and organization of the local "Energiewende". 2. Higher local added value. 3. Harnessing tax regulations for improving municipal services. 4. Improving the income situation of the city. 5. Democratization of supply and stronger orientation towards the common good (public value). 6. Creating and protecting good jobs. 7. Acting in social responsibility in energy supply. 8. Expansion of eco-efficient energy services. 9. Harnessing customer relations and public image. 10. Materialising synergies with other sectors.
Based on expert opinions, the study finds out that the likelihood of these targets being reached is "high to very high". The aim of this article is to provide a compact and basic understanding of the possible reasons for the phenomenon of remunicipalisation.