Refine
Year of Publication
- 2019 (107) (remove)
Document Type
- Peer-Reviewed Article (38)
- Report (22)
- Part of a Book (14)
- Conference Object (9)
- Contribution to Periodical (9)
- Working Paper (9)
- Doctoral Thesis (4)
- Book (2)
Language
- English (107) (remove)
This report provides an overview of the main findings from the different research tasks in the CIRCTER project and delivers selected policy messages with European coverage. The report provides: (Sec. 2) a territorial definition of the circular economy; (Sec. 3) insights into the available statistics on material and waste patterns and flows and their interpretation, alongside new territorial evidence on both aspects; (Sec. 4) a sectoral characterisation of the circular economy at regional level (NUTS-2), including data on turnover and jobs; (Sec. 5) key findings from the CIRCTER case studies; (Sec. 6) a systemic interpretation of the circular economy that works as a knowledge-integration mechanism for the entire report; (Sec. 7 and 8) an analysis of the most relevant circular economy policies and strategies at various territorial levels; (Sec. 8) a subset of policy recommendations focusing in particular on territorial and cohesion policies, and; (Sec. 9) suggestions for further research.
On the basis of a literature research, this subtask develops a conceptional framework for a common understanding of CE within the project team and for the following work packages and tasks. After a brief introduction into the objectives and the context of a circular economy, a more elaborated look into the necessity of an explicit understanding of CE, the objectives, the spatial perspective of CE and the specific challenges within the CICERONE context will be done, in order to develop a basis for a common understanding within the project context. Circular economy can and has to be understood as an (eco-)innovation agenda. Therefore, the paper investigates the role policy has to play to support innovation for a CE transition, for creating the framework conditions and why CE has also to be build from the ground up. Finally, the paper looks from two perspectives at emerging trends and business models in a CE to sketch next steps towards the transition in a selection of central sectors. Conclusions are drawn on the basis of the insights gained by the preceding chapters.
The key objective of this deliverable is to gain insights on and assess how CE is being implemented and R&I is being funded at regional level, e.g., via the RIS3 strategy and Structural Funds. As such it sets the scope for the project and provides the background against which programmes and measures can be understood, assessed, developed and recommended in succinct tasks and work packages. The objective of this report is to provide a concise overview of the current R&I priorities, as expressed in running and newly introduced funding and legislative measures with respect to Circular Economy in European countries and regions.
Digitalisation is disrupting business practices worldwide and transforming consumption patterns. While a global increase in wealth is leading to higher consumption rates, consumption-related decisions are increasingly based on digital information and marketing; furthermore, shopping increasingly takes place online and products and services are more and more digitalised.
The transformative character of digitalisation calls for political action in order to ensure sustainable consumption in a new and dynamically changing context. Focusing on consumption is imperative in combatting many global challenges. Take climate change: consumption-based emissions (i.e. emissions from domestic final consumption and emissions caused by the production of imported goods) are rising more rapidly than production-based emissions in high-income countries. Meanwhile most political measures target production-based emissions (i.e. territorial emissions).
The German council for sustainable development (Rat für Nachhaltige Entwicklung) has called for the §principle of sustainable development [to] serve as the political framework for digital transformation" as "digitalisation has the potential to engender disruptive developments in the business world as well as society as a whole that carry both great opportunities and significant risks". Thus, to implement the 2030 Agenda, in particular SDG 12, and the National Program Sustainable Consumption, it is key to seize the opportunities that digitalisation presents for sustainable consumption and tackle the challenges. This assessment report thus examines the following key question: "What are the implications of the digital transformation of consumption patterns for the implementation of the German sustainability strategy in, by and with Germany?"
Biofuels and electrification are potential ways to reduce CO2 emissions from the transport sector, although not without limitations or associated problems. This paper describes a life-cycle analysis (LCA) of the Brazilian urban passenger transport system. The LCA considers various scenarios of a wholesale conversion of car and urban bus fleets to 100% electric or biofuel (bioethanol and biodiesel) use by 2050 compared to a business as usual (BAU) scenario. The LCA includes the following phases of vehicles and their life: fuel use and manufacturing (including electricity generation and land-use emissions), vehicle and battery manufacturing and end of life. The results are presented in terms of CO2, nitrous oxides (NOx) and particulate matter (PM) emissions, electricity consumption and the land required to grow the requisite biofuel feedstocks. Biofuels result in similar or higher CO2 and air pollutant emissions than BAU, while electrification resulted in significantly lower emissions of all types. Possible limitations found include the amount of electricity consumed by electric vehicles in the electrification scenarios.
Much of the current literature on climate clubs sees mitigation costs creating free rider incentives as the main problem of climate policy. Climate clubs are supposed to solve this problem by creating additional incentives for mitigation. Looking more in detail, one sees that the situation differs from sector to sector. Some industry sectors indeed have substantial cost and competitiveness issues. In others such as electricity and transport, there are costs at micro level but balance for economy and society as a whole is rather positive. International climate policy in general and clubs in particular should therefore be tailored to sectoral specifics.
The new mechanism defined under Article 6.4 of the Paris Agreement is supposed to allow for international cooperation with regard to climate change mitigation and thereby enable an increase in overall mitigation. Nevertheless, the design of the mechanism under Article 6.4 should also make sure that it is not be in conflict with the long-term goal of net-zero GHG emissions but even better foster national pathways leading to this objective. Building this into the mechanism requires to shift the focus from short- and mid-term considerations to the long-term perspective in one way or another.
This discussion paper explores three different approaches that may help to foster the long-term objective of net-zero GHG emissions in the operationalization of Article 6.4, namely positive and negative lists, additionality with regard to a baseline consistent with both, NDCs and long-term targets, as well as adaptation of existing instruments and criteria from climate finance. The detailed discussion of the ap-proaches shows that the approaches should not be seen as mutually exclusive but rather as comple-mentary to each other. From the analyses, two storylines emerge how to combine aspects of the differ-ent approaches in a reasonable way to foster the long-term objective of net-zero GHG emissions under Article 6.4.
Article 6.4 of the Paris Agreement explicitly acknowledges the need to incentivize and facilitate the participation of private entities in the mitigation of greenhouse gas emissions. Under the Clean Development Mechanism (CDM), private sector actors had already the opportunity to participate in a new and fast-growing market. However, they faced numerous challenging investment barriers. The study provides an overview on key factors and barriers determining private sector participation in Article 6 mechanisms. It distinguishes between the three topics demand side factors, rules and standards for market mechanisms, and supply side factors and provides for each of them options to mitigate or overcome barriers.
In a short analysis, it further explores three of the identified options:
- Improving the design and support of national systems and capacities is an important pre-requisite for the private sector to be able to generate and sell ITMOs
- The up-scaling of mitigation activities e. g. through (sub-) sector level crediting, and policy crediting helps private sector actors to benefit from economies of scale
- Exploring the potential of digitization of measuring, reporting and verification (MRV), e. g. the use of sensors, internet of things, artificial intelligence and blockchain to make the project cycle more efficient and reduce transaction costs.
Overall, the report stresses the importance of host country readiness to provide the private sector with a robust and trusted environment that allows for the adoption of Article 6 mechanisms.
The earth as we know it can only continue to exist if humanity finds a way to switch to a sustainable use of energy and resources. This work contributes to the research carried out to achieve this goal by improving the coating of adsorptive materials. These are used in heat transformation and drying processes that allow for efficient temperature and humidity control in buildings. A central component of these adsorptive coatings is the binder that acts as "glue" in the manufacturing of the coating. In this work the methods to evaluate binder performance regarding their thermal stability under the process conditions, their mechanical stability and their influence on the adsorptive properties of the coating were established. The coatings have to meet special requirements due to the thermal stresses and low pressure atmosphere they experience in these applications. A selection of silicone binders was then characterized with the established tests according to these requirements. Additionally a selection of inorganic binders was investigated because they allow for the use of high desorption temperatures and thus a high energy efficiency of the process. Out of these binders Silres® MP50E emerged as the most promising one due to very good adsorptive properties of the coating, its good temperature stability and ease of use. While some of the inorganic binders showed very good adsorptive properties and temperature stability the mechanical stability of all inorganic binders was not sufficient for their use in adsorption heat transformation technology. This is the first time that a broad selection of binders was evaluated with regards to adsorptive coatings and the results published in literature. With a suitable binder identified, the next step was to optimize the coating of the heat exchangers in order to work out how to manufacture the most efficient and powerful heat exchangers. Samples with different coating thicknesses were manufactured in small scale and full scale and their adsorption behavior was characterized. It could be shown for the first time that it is possible to increase energy efficiency by improving the mass ration of adsorber to coating and increase the delivered power at the same time. This was shown for small and full scale samples. It was shown that under the corresponding conditions the heat transfer from the coating layer to the adsorber metal substrate is the limiting step in the process. These results can now be used for the planning and construction of adsorbers. With knowledge of a suitable binder and how to coat efficient, powerful adsorbers, the coating process itself was improved to allow for industrial scale manufacturing. A central point here is the ability to control slurry rheology. Out of many rheology additives those that are suited for the application in adsorption heat transformation were identified and their influence on the slurry rheology thoroughly characterized. Additionally the process of slurry preparation could be simplified for several different adsorbents. Here it was shown that the supersonic deagglomeration step is not necessary to prepare a slurry. Extending the possible coating techniques and in addition to the dip coating process used so far, the spray coating of adsorptive coatings was established for the first time in literature. This process is widely used in the industry and allows for easier plugin into existing coating processes. For the coating of high resolution patterns a proof of concept of the screen printing process was carried out.
Enhancing cross-functional integration in new product development becomes increasingly important for industrial players to keep up with shorter product life cycles in technological innovation dynamics. Abundant research reflects the topic's significance, yet ambiguity in empirical results persists and industrial adoption of existing methods remains incremental. This thesis employs a qualitative approach to build a case study at the design-manufacturing interface of new product development of electrified cars. Cross-functional coopetition, as the joint occurrence of cooperation and competition, is adopted to generate an in-depth understanding of integration dynamics. Socio-organizational and contextual aspects are found to shape integration in a new product development context substantially. A model of interface dynamics is developed which provides for analysis and prediction of these aspects' impact on effective integration. A grounded theory approach to enhance integration is explored that introduces constraints as stimuli to consider manufacturability aspects in the design process. Constraint introduction is found to positively impact both cross-functional integration and creativity, with eight characteristics of constraint quality identified as moderating factors. A theoretical model is contributed which outlines cause-effect relationships of constraints' impact on antecedents of new product development success. It substantiates constraints' role in innovation contexts and encourages application for design-manufacturing integration as well as for other interfaces or purposes.
This assessment report identifies six key areas of sustainable consumption. Transforming those areas is associated with a significant, positive impact on sustainable development. In this way, those key areas lay the foundation to set clear priorities and formulate concrete policy measures and recommendations. The report describes recent developments and relevant actors in those six fields, outlines drivers and barriers to reach a shift towards more sustainability in those specific areas, and explores international good-practice examples. On top of this, overarching topics in the scientific discourse concerning sustainable consumption (e.g. collaborative economy, behavioural economics and nudging) are revealed by using innovative text-mining techniques. Subsequently, the report outlines the contributions of these research approaches to transforming the key areas of sustainable consumption. Finally, the report derives policy recommendations to improve the German Sustainable Development Strategy (DNS) in order to achieve a stronger stimulus effect for sustainable consumption.
Creating statistics for China's building energy consumption using an adapted energy balance sheet
(2019)
China's regular energy statistics does not include the building sector, and data on building energy demand is included in other types of energy consumption in the Energy Balance Sheet (EBS). Therefore data on building energy demand is not collected based on statistics, but rather calculated or estimated by various approaches in China. This study aims at developing and testing China's building energy statistics by applying an adapted EBS. The advantage of the adapted EBS is that statistical data is from the regular statistical system and no additional statistical efforts are needed. The research result shows that the adapted EBS can be included in China regular energy statistical system and can be standardized in a transparent way. Testing of the adapted EBS shows that China's building energy demand has shown an annual increase of 7.6% since 2001, and a lower contribution to the total energy demand as compared to the developed world. There is also a close link to lifestyle and living standard while industrial energy demand is mainly driven by economy and decoupling of building energy demand with increasing of building floor area, this is due to a considerable improvement of building energy efficiency. The adapted EBS creates a method for China conducting statistics of building energy consumption at the sector level in a uniform way and serves as the basis for any sound building energy efficiency policy decisions.
Climate researchers agree that anthropogenic greenhouse gas emissions significantly contribute to climate change, and that radical measures to reduce greenhouse gas emissions and to adapt to the impacts of no longer avoidable climate change are needed. The German Federal Government with its Climate Protection Plan 2050 reinforced its target to reduce Germany's greenhouse gas emissions by 80 to 95 percent compared with 1990. The achievement of these targets requires nothing less than a fundamental transformation of spatial planning.
In the paper a methodology to scientifically assess the likely impacts of possible combinations of policies or strategies to achieve the energy transition, i.e. to reduce the greenhouse gas emissions of urban mobility and transport is proposed and demonstrated, using the Ruhr Area, the largest conurbation in Germany, as an example.
The results of the policies examined so far can be summarised as follows: Push measures as high energy prices, speed limits or reduction of the number of lanes of main roads are more effective in reducing greenhouse gas emissions than pull measures as the promotion of cycling, walking, electric cars or public transport. Between policies or policy packages there can be positive or negative synergies, i.e. the impacts of measures can reinforce or weaken each other. The results show that even with ambitious policies the greenhouse gas emission targets of the national and state governments will not be achieved and that more radical policies are needed.
Addressing the prevailing mode of high-carbon lifestyles is crucial for the transition towards a net-zero carbon society. Existing studies fail to fully investigate the underlining factors of unsustainable lifestyles beyond individual determinants nor consider the gaps between current footprints and reduction targets. This study examines latent lifestyle factors related to carbon footprints and analyzes gaps between decarbonization targets and current lifestyles of major consumer segments through exploratory factor analysis and cluster analysis. As a case study on Japanese households, it estimates carbon footprints of over 47,000 households using expenditure survey microdata, and identifies high-carbon lifestyle factors and consumer segments by multivariate regression analysis, factor analysis, and cluster analysis. Income, savings, family composition, house size and type, ownership of durables and automobiles, and work style were confirmed as determinants of high-footprint Japanese households, with eight lifestyles factors, including long-distance leisure, materialistic consumption, and meat-rich diets, identified as the main contributory factors. The study revealed a five-fold difference between lowest and highest footprint segments, with all segments overshooting the 2030 and 2050 decarbonization targets. The findings imply the urgent need for policies tailored to diverse consumer segments and to address the underlying causes of high-carbon lifestyles especially of high-carbon segments.
The Wuppertal Institute conducted an impact analysis of the NRW Sustainability Bond #4 of 2018 on behalf of the State Government of North Rhine-Westphalia (NRW). The most recent bond has a volume of EUR 2.025bn, a term of 10 years and consists of 52 eligible projects from the State's 2017 general budget (sustainable value-added was confirmed in a second party opinion by oekom research1). This report analyses the contribution of the bond to climate mitigation, sustainable land use and social impacts. It also includes information on the impacts of the previous three bonds (NRW Sustainability Bond #1 to #3).
The Wuppertal Institute conducted an impact analysis of the NRW sustainability bond #5 of 2019 on behalf of the State government of North Rhine-Westphalia (NRW). The most recent bond has a volume of EUR 2.25 bn, a term of 15 years and consists of 52 eligible projects from the State's 2018 general budget (sustainable value-added was confirmed in a second party opinion by ISS-oekom). This report analyses the contribution of the bond to climate mitigation, sustainable land use and social impacts. It also includes information on the impacts of the previous four bonds (NRW sustainability bond #1 to #4).
Reflecting trends in the academic landscape of sustainable energy using probabilistic topic modeling
(2019)
Background: Facing planetary boundaries, we need a sustainable energy system providing its life support function for society in the long-term within environmental limits. Since science plays an important role in decision-making, this study examines the thematic landscape of research on sustainable energy, which may contribute to a sustainability transformation. Understanding the structure of the research field allows for critical reflections and the identification of blind spots for advancing this field.
Methods: The study applies a text mining approach on 26533 Scopus-indexed abstracts published from 1990 to 2016 based on a latent Dirichlet allocation topic model. Models with up 1100 topics were created. Based on coherence scores and manual inspection, the model with 300 topics was selected. These statistical methods served for highlighting timely topic trends, differing thematic fields, and emerging communities in the topic network. The study critically reflects the quantitative results from a sustainability perspective.
Results: The study identifies a focus on establishing and optimizing the energy infrastructure towards 100% renewable energies through key modern technology areas: materials science, (biological) process engineering, and (digital) monitoring and control systems. Energy storage, photonic materials, nanomaterials, or biofuels belong to the topics with the strongest trends. The study identifies decreasing trends for general aspects regarding sustainable development and related economic, environmental, and political issues.
Conclusions: The discourse is latently adopting a technology-oriented paradigm focusing on renewable energy generation and is moving away from the multi-faceted concept of sustainability. The field has the potential to contribute to climate change mitigation by optimizing renewable energy systems. However, given the complexity of these systems, horizontal integration of the various valuable vertical research strands is required. Furthermore, the holistic ecological perspective considering the global scale that has originally motivated research on sustainable energy might be re-strengthened, e.g., by an integrated energy and materials perspective. Beyond considering the physical dimensions of energy systems, existing links from the currently technology-oriented discourse to the social sciences might be strengthened. For establishing sustainable energy systems, future research will not only have to target the technical energy infrastructure but put a stronger focus on issues perceivable from a holistic second-order perspective.
This report on urban mobility performance measurement is aimed at enabling stake- holders of the city of Bucharest and the public to understand their current urban mobility situation through a point-based results framework. It shall provide the city of Bucharest with a yardstick to measure its performance and benchmark the progress against some of its counterparts. It measures the urban mobility and compares it with 13 other European cities: Berlin, London, Vienna, Brussels, Moscow, Rome, Zurich, Paris, Amsterdam, Copenhagen, Oslo, Budapest and Madrid.
Similar to many other European cities, Bucharest employs a Sustainable Urban Mobility Plan (SUMP) in order to continuously improve urban transport and mobility and to make it more sustainable. In this respect, the report should also be regarded as a document which supports the stakeholders in Bucharest in their efforts to develop transport and mobility in the city more sustainable.
Digitalisation is in full swing and it is changing and influencing the world of the 21st century as no other dynamics of change has done before. Dealing with its impacts and at the same time shaping digitalisation itself is therefore a core task for achieving a globally sustainable transformation (German Advisory Council on Global Change - WGBU, 2019). But which direction should digitalisation take to ensure that it makes e ective contributions to globally sustainable development? And what is the specific approach needed to steer digitalisation in the right direction?
This doctoral research is located in the branch of sustainability sciences that has the realisation of sustainable development as its core subject of research. The most broadly accepted notion of sustainable development is that which evolves along the resolutions, declarations, and reports from international processes in the framework of the United Nations (UN). The consensual outputs from such processes feature global-generalised and context-free perspectives. However, implementation requires action at diverse and context-rich local levels as well. Moreover, while in such UN processes national states are the only contractual parties, it is increasingly recognised that other ("nonstate") actors are crucial to sustainability. The research presented here places the attention on bottom-up initiatives that are advancing innovative ways to tackle universal access to clean energy and to strengthen small-scale family farmers. This means, the focus is on bottom-up initiatives advancing local implementation of global sustainability targets, more precisely, targets that make part of the Sustainable Development Goals two and seven (SDG 2 and SDG7). The research asks how such bottom-up initiatives can contribute to the diffusion of sustainability innovations, thereby also contributing to social change.
Because prevention is closely linked to complex consumption patterns, even cultural changes, such as increasing environmental awareness, changes in the average size of households or changes in the industrial structure of an economy, are relevant factors for the interpretation of changes in the generation of waste - it is more or less impossible to isolate the effect of specific waste prevention measures in this complex system. This must be considered, in particular, in international comparisons of policies and their potential transferability. The guidelines of the European Commission on waste prevention also point to the particular problem of data availability in the area of prevention: as waste statistics focus mainly on the treatment and fate of wastes, they are often of limited value for prevention of waste because they don't give sufficient information about their origins or reasons for their generation.
Against this background, this report has the following objectives:
Chapter 2 discusses strengths and weaknesses of typical waste-based prevention indicators; Chapter 3 analyses possible indicators that consider an upstream perspective and take into account the ecological rucksacks of products and components that have become waste; Chapter 4 focuses on specific product groups that could be targeted by waste prevention indicators.
In general, the report describes the complexity of measuring waste prevention and outlines pros and cons of possible approaches. The final chapter aims to draw rather pragmatic conclusions on possibly most preferable options for future policy-making.
Digitalization is a transformation process which has already affected many parts of industry and society and is expected to yet increase its transformative speed and impact. In the energy sector, many digital applications have already been implemented. However, a more drastic change is expected during the next decades. Good understanding of which digital applications are possible and what are the associated benefits as well as risks from the different perspectives of the impacted stakeholders is of high importance. On the one hand, it is the basis for a broad societal and political discussion about general targets and guidelines of digitalization. On the other hand, it is an important piece of information for companies in order to develop and sustainably implement digital applications. This article provides a structured overview of potential digital applications in the German energy (electricity) sector, including the associated benefits and the impacted stakeholders on the basis of a literature review. Furthermore, as an outlook, a methodology to holistically analyze digital applications is suggested. The intended purpose of the suggested methodology is to provide a complexity-reduced fact base as input for societal and political discussions and for the development of new digital products, services, or business models. While the methodology is outlined in this article, in a follow-up article the application of the methodology will be presented and the use of the approach reflected.
The need for sustainable energy management at the municipal level is growing, in order to meet EU climate goals. Multiple initiatives have been launched to support municipalities in energy planning and strategy development process. Despite available support, research shows mixed results about implementation of plans and strategies. This research paper analyses what targets municipalities set, how they monitor implementation of their sustainable energy action plans (SEAPs) and searches for the most important factors that have enabled or hindered the implementation of local SEAPs at Latvia. The article shows that, in some cases, there is evidence that SEAP development is a project-based activity, supported by external experts. From municipal personnel point of view, it is a project that ends with approved SEAP, but not a part of their future daily routine. Eventually implementation of the plan is difficult, because municipalities lack experience in daily management of energy data, distribution of responsibilities and implementation of procedures. Municipalities also tend to exclude important stakeholders in their SEAPs, like, private sector, household sector and transport sector, which lead to lower targets and lower achievements in GHG reduction.
In the context of the German-Korean Energy Policy Dialogue, integration of renewable power sources and smart grids have been identified as topics with high relevance. This study aims to support mutual learning and exploration of new fields for collaboration by identifying similarities and differences in the respective status quos, strategies and policies in both countries.
After a short introduction to the South Korean energy situation, Chapter 2 provides an overview of the South Korean power market, its situation regarding renewable power sources and the Korean definition of smart grids. Chapter 3 of this study highlights the major South Korean energy strategies and regulatory frameworks relevant to integration of renewable energies and smart grids. In Chapter 4, the status and perspectives of renewable energy sources integration and smart grids in South Korea are discussed, presenting various demonstrative examples, new business models and the current situation of technology deployment. Chapter 5 puts South Korea in the global context and compares it to Germany. Finally, Chapter 6 draws conclusions and presents recommendations on suitable areas for mutual learning.
While the Paris Agreement (PA) has enshrined ambitious long-term objectives, the current level of action of the Parties to the Agreement falls far short of this ambition, as is recognised in the very COP decision adopting the Agreement. The Global Stocktake (GST) established in Art. 14 of the PA is a key element to address this problem. Its purpose is to review the implementation of the PA and to assess the progress made towards the collectively agreed goals.
The aim of this report is to develop recommendations on how to maximise the potential impact of the GST. The report starts from a perspective of what the GST could ideally do, irrespective of decisions already taken under the UNFCCC and other political constraints. In the second step, the report takes these limitations into account and suggests ways for how to nonetheless work towards the desired outcome.
Theoretical advances suggest that international governance in general and the Paris Agreement in particular provide a strong signal guiding sociotechnical systems toward decarbonization. We assess this signal and its effects empirically, by examining the struggle of competing narratives as present in the communications of leading US fossil fuel industry associations and companies. The results are then discussed in the context of the national and international climate and energy policy debates in a study period from late 2014 until the announcement of withdrawal from the Paris Agreement in June 2017. We find that the Paris Agreement has institutionalized a narrative paradigm that is surprisingly resilient. While the election of Donald Trump and his climate and energy policy led to a narrative shift in the coal industry, the oil and gas industry remained conspicuously silent in its immediate response and maintained its narrative strategies despite its alignment with the Paris Agreement.
This study focuses on smart grids and integration of renewable energy sources in Japan. It first elaborates on the current status of the Japanese power market, its electricity grid, and the trends taking place which result in the need for smart grids. It proceeds with strategic and legislative framework setting relevant for smart grids and renewables, and with current status of smart grids and renewables. Further, it focuses on relevant stakeholders, new business models, and public acceptance relevant for smart grids and renewables. It then puts the Japanese developments in international context and, where possible, compares it to Germany. Lastly, it derives recommendations and identifies where Japanese and German policymakers, regulators and private sector stakeholders might profit from closer collaboration.
The concept of sufficiency - reducing energy uses beyond technical efficiency - is far-reaching and requires a reflection on human needs, energy services, urban structures, social norms, and the role of policies to support the shift towards lower-energy societies. In recent years, a growing body of literature has been published on energy sufficiency in various disciplines. However, there has been limited exchanges and cooperation among researchers so far, hindering the visibility and impact of this research. This paper presents an assessment of where sufficiency research stands, especially in the perspective of policy-making. It is the first overview paper issued in the context of the newly-founded ENOUGH network - International network for sufficiency research & policy, established in 2017. In the first part, we provide a condensed literature review on energy sufficiency, based on dozens of recent references collected through the network. Through four main themes (the nature of sufficiency, the challenges of modelling it, the barriers to its diffusion, and the approaches to foster it), we summarise the key issues and approaches. We then present what the scholars themselves see as the priorities for future research, promising sufficiency policy options, and key barriers that research should help overcome. We collected their views through a questionnaire completed by more than 40 knowledgeable authors and experts from various disciplines. We finally build on the previous parts to draw some recommendations on how sufficiency research could increase its impact, notably in relation to policy-making.
Germany and Japan have both gained substantial experience with hydrogen production and applications, albeit with focus on different sectors. They also share similar drivers for hydrogen development and, of course, similar technical and economic opportunities and challenges. However, there also are relevant differences in the policy priorities and approaches.
Notwithstanding differing emphases and patterns, the two countries share three main drivers for hydrogen development and deployment: climate mitigation and other environmental goals, energy supply diversification, and technological leadership. In this context, hydrogen has been identified by the German and the Japanese governments during the Energy Policy Dialogue as having potential for closer cooperation.
The authors of this study provide an overview of demand-side deployment by sector (residential, transport, industry, power generation and power-to-x) for both countries, as well as of their hydrogen policy debates, key institutions, R&D programs and demonstration projects. They also present a short survey on relevant international platforms and initiatives in which Japan and Germany participate.
On the basis of a meta-analysis of the role of hydrogen in 18 long-term energy system scenarios for Germany and 12 scenarios for Japan, this study draws conclusions on the possible role of hydrogen in the long term energy policy debates of both countries. Subsequently, the authors discuss sustainability criteria and certification schemes for clean hydrogen, compare the greenhouse gas intensity of different hydrogen supply chains and provide a data-based analysis to identify countries which could become important suppliers of clean hydrogen.
This Topic Guide aims to provide answers to the question: "How can transport products, services and works be delivered sustainably?". Public procurement accounts for about 19% of the European Union's GDP and thus is a powerful lever to support the transition of urban mobility. The purchasing power of municipalities and regions can create a critical demand for innovative and green goods, services and business models such as low emission vehicles or shared mobility solutions. Public procurement can increase their competitiveness and availability, and thus trigger the market penetration of innovative products and services. The Guide discusses the general concept of sustainable public procurement, the legislative environment in the EU and leads through the different stages of a procurement process for SUMP (Sustainable Urban Mobility Planning) measures in a stepwise approach. It also discusses different inherent principles of sustainable public procurement in the field of urban mobility such as life cycle costing and how these can be applied. In so doing, it points to relevant further guidance discussing specific issues and concepts.
The transformation of urban mobility systems causes financial costs for the procurement and operation of innovative products and services and for the adaptation of existing infrastructure. While public budgets are limited, investments in infrastructure and transport services compete against other spending priorities, and private investors often are reluctant to invest into sustainable transport projects. Thus, cities need to seek additional funding and financing options and to develop business models to attract private sector investments in the development of the urban transport system. Moreover, financing schemes should cover the entire SUMP (Sustainable Urban Mobility Planning) cycle, starting from planning, to project implementation and procurement up to the operation and maintenance of services and infrastructures.
This requires the blending of different revenue sources, including:
project related revenue sources such as public transport fares and the lease of advertising space in buses;
the extension of the local tax base, for example through the introduction of road user charges and parking fees or the use of value capture mechanisms;
National, bilateral, and European grants;
Debt financing through loans and other instruments such as issuing green bonds. Finally, a prudential engagement of the private sector in infrastructure development and service provision can reduce the direct burden on public budgets while enhancing service quality. The applicability of specific financing options critically depends on the national legislative environment. Many of the instruments and case examples presented here may not be transferred to other Member States due to the different distribution of responsibilities and powers between the political levels in the Member States. This report, however, can inspire the search for potential funding and financing sources and is therefore aimed not only at local and regional authorities but also at decisionmakers at the national level. Still, whether a specific instrument can be used in a Member State needs to be assessed on a case-by-case base.
This report explores the future role of the voluntary carbon market and its potential to contribute to raising the ambition of climate policy. For this purpose, desk research was complemented by interviews with voluntary carbon market representatives. The report finds that the current roles of the voluntary market are set to change fundamentally due to the Paris Agreement. For the future of the voluntary market as an investor, three roles were identified, each of which is associated with specific challenges: The market may maintain its current role of buyer of carbon neutrality credits, it may become a supporter of NDC implementation, or it may become a driver of ambition. With regard to the future role of private certification standards, the Paris Agreement may hold the possibility of using such standards in the context of compliance activities. Overall, the findings indicate that the voluntary market has some potential to contribute to ambition raising. Whether this potential will actually be unlocked depends on how the concept of ambition raising will be operationalized under the Paris Agreement and to what degree it can be integrated into the voluntary market's activities and business models.
Article 6 of the Paris Agreement establishes mechanisms for Parties to "pursue voluntary cooperation in the implementation of their nationally determined contributions to allow for higher ambition in their mitigation and adaptation actions [...]" (Article 6.1). I. e. the mechanisms are explicitly designed to foster higher ambition. However, without additional guidance and rules, the economic incentives of carbon markets may work against increasing host country ambition. For example, setting ambitious NDC targets may directly reduce the amount of mitigation outcomes that go beyond the NDC target and that a host country can transfer abroad. The report presents four options on how the risks can be ad-dressed and ambition can be increased: (1) Strengthening reporting, transparency and comparability; (2) Reconciling the design of the Article 6.4 mechanism with ambition raising of host countries; (3) Supporting the host country to raise ambition through the Article 6.4 mechanism; (4) Fostering the acquiring country to raise ambition through the Article 6.4 mechanism. These options are assessed and recommendations are provided on how they could be implemented.
Article 6.4 of the Paris Agreement establishes a new mechanism for Parties to cooperate in achieving their nationally determined contributions (NDCs). One key innovation of the Article 6.4 mechanism is its objective to "deliver an overall mitigation in global emissions" (Art. 6.4(d)). This report develops recommendations on how to implement this objective. A key difficulty lies in the fact that even basics of how the mechanism is supposed to function have so far not been clarified by the Parties. The report therefore first sketches out what has so far been agreed and discussed on the mechanism’s activity cycle. Second, as the concept of overall mitigation has so far also not been clearly defined by Parties, the report derives a working definition from the language that was agreed in the Paris Agreement. In the next step, the report provides a survey of the options to achieve overall mitigation that have so far been discussed in the relevant literature and in the Article 6 negotiations. Many of these options were developed in the context of the Kyoto mechanisms. The report therefore discusses to what extent the options are also applicable under the Paris Agreement or whether adjustments need to be made. In the following, the options that are applicable under the Agreement are assessed on the basis of a number of criteria. The report concludes with a summary of the main findings and recommendations.
Reaching the climate goals for the building sector requires to improve insulation and to increase air tightness of buildings in order to minimize heat loss. To achieve these goals and to prevent risks to the health of occupants and damages to the building fabric due to insufficient removal of pollutants and humidity, broad implementation of Mechanical Ventilation and Heat Recovery (MVHR) systems is crucial.
Comparable and up to date figures on the market penetration of MVHR systems across the EU are hardly available. However, figures point to only a small share of residential buildings being currently equipped with such systems (cf. Riviere et al. 2009). For the German building stock the figure is estimated to be below 5% (Händel 2011). The paper presents insights into the reasons for the slow diffusion of HRV technologies in the German building stock. It builds on the results of a recently completed research project whose central aim was to identify actor-specific and structural barriers for the diffusion of efficient ventilation systems in apartment buildings and to examine how these barriers can be addressed.
The analysis is based on 40 semi-structured expert interviews with energy consultants, HVAC craftsmen, and housing companies, as well as guided in-depth interviews with private owners of apartment buildings or apartments that were evaluated by means of qualitative content analysis. Based on the collected data, seven barrier categories were identified, each containing a range of single barriers for the diffusion of efficient ventilation systems within the residential building stock.
Results of the analysis were quantitatively validated by means of online surveys and a household survey among 1,008 households. The paper points out interdependencies within the chain of effects leading up to the investment decision of building owners. Furthermore, based on good practice examples identified within the data collection process, it proposes different measures to address these barriers.
A significant reduction in greenhouse gas emissions will be necessary in the coming decades to enable the global community to avoid the most dangerous consequences of man-made global warming. This fact is reflected in Germany's 7th Federal Energy Research Program (EFP), which was adopted in 2018. Direct Air Capture (DAC) technologies used to absorb carbon dioxide (CO2) from the atmosphere comprise one way to achieve these reductions in greenhouse gases. DAC has been identified as a technology (group) for which there are still major technology gaps. The intention of this article is to explore the potential role of DAC for the EFP by using a multi-dimensional analysis showing the technology's possible contributions to the German government's energy and climate policy goals and to German industry's global reputation in the field of modern energy technologies, as well as the possibilities of integrating DAC into the existing energy system. The results show that the future role of DAC is affected by a variety of uncertainty factors. The technology is still in an early stage of development and has yet to prove its large-scale technical feasibility, as well as its economic viability. The results of the multi-dimensional evaluation, as well as the need for further technological development, integrated assessment, and systems-level analyses, justify the inclusion of DAC technology in national energy research programs like the EFP.
This paper offers a comparative analysis of small wind electrification programmes targeted at remote sheep farming households in two of the windiest regions of the world, Argentine Patagonia and the Falkland Islands/Islas Malvinas. Despite comparable environmental conditions and local livelihoods, their impact was vastly different. Insights from socio-technical systems and strategic niche management approaches offered a deeper understanding of the local context and development dynamics, facilitating the identification of the critical success factors that contributed to these two distinct outcomes and finally highlighting those that can inform the design of future such initiatives. The research is based upon a series of semi-structured interviews with key stakeholders, observational field visits and review of archival sources. The critical factors identified by this case study research include strong and consistent institutional support, investment in robust equipment creation of effective feedback loops from the field and hybridisation. Additionally, a user centred approach that assesses whether small wind is really the right option for each individual household and if so, matches an appropriate energy system to their unique and evolving needs. Finally, empowering users to take on as much responsibility for maintenance as possible by integrating maintenance practices with local culture and ensuring the support of an effective decentralised maintenance network.
Responsible consumption and production is one of the Sustainable Development Goals of the United Nations. To achieve this goal the currently high extraction rates of natural resources, that our economy is based on, needs a transformation of the consumption and production system considering technological as well as social change. One of the promising transition approaches is seen in collaborative consumption with its many facets of socio-cultural innovations and fast growing number of participants and businesses. With a decreasing production of goods, due to a utilisation of underutilised assets, these offers might support an absolute reduction of the global resource use. However, a positive environmental effect depends on the setting and the social practices of such sharing offers and is not sustainable or resource efficient generally. Also, resource efficient practices with a low diffusion potential that stick in a niche offer no leverage to achieve sustainable consumption patterns. Thus, this paper describes a mixed method approach to analyse the resource efficiency and diffusion potential of 20 sharing offers in the area of mobility, housing & travel and everyday objects in Germany. Results show that the overall positive environmental connotation of sharing offers cannot be confirmed. We identified five clusters of offers that are all treated to be differently when it comes to deploying the positive potential and avoid unnecessary societal effort to achieve the mentioned Sustainable Development Goal.
German energy transition : targets, current status, chances and challenges of an ambitious pathway
(2019)
With the "Energiewende", the German term for the transformation of the national energy system, the German government pursues ambitious goals, primarily but not only to reflect the climate change challenge and to react to the risks associated with the use of nuclear power plants. After launching the energy concept in mid-2011, which describes the "Energiewende" goals, Germany was perceived as an international pioneer in energy transition for many years and has been acknowledged for its braveness to combine ambitious greenhouse gas (GHG) mitigation targets with a phase out program for nuclear power plants. In this context, this article asks where Germany’s energy transition currently stands, what is planned next and how far the set targets have been achieved or where more action is required to stick to this pathway.
In recent years, most countries in the Middle East and North Africa (MENA), including Jordan, Morocco and Tunisia, have rolled out national policies with the goal of decarbonising their economies. Energy policy goals in these countries have been characterised by expanding the deployment of renewable energy technologies in the electricity mix in the medium term (i.e., until 2030). This tacitly signals a transformation of socio-technical systems by 2030 and beyond. Nevertheless, how these policy objectives actually translate into future scenarios that can also take into account a long-term perspective up to 2050 and correspond to local preferences remains largely understudied. This paper aims to fill this gap by identifying the most widely preferred long-term electricity scenarios for Jordan, Morocco and Tunisia. During a series of two-day workshops (one in each country), the research team, along with local stakeholders, adopted a participatory approach to develop multiple 2050 electricity scenarios, which enabled electricity pathways to be modelled using Renewable Energy Pathway Simulation System GIS (renpassG!S). We subsequently used the Analytical Hierarchy Process (AHP) within a Multi-Criteria Analysis (MCA) to capture local preferences. The empirical findings show that local stakeholders in all three countries preferred electricity scenarios mainly or even exclusively based on renewables. The findings demonstrate a clear preference for renewable energies and show that useful insights can be generated using participatory approaches to energy planning.
Nowadays, the main impetus to apply additive manufacturing (AM) of metals is the high geometric flexibility of the processes and its ability to produce pilot or small batch series. In contrast, resource and energy intensities are often not considered as constraints, even though the turnout of additive manufacturing is high, at least compared to chip removing processes.
The study at hand analyses the material characteristics and environmental impacts of a hose nozzle as an example of a commercial product of simple geometry. The production routes turning (conventional manufacturing) and laser beam melting (additive manufacturing) are compared to each other in terms of natural resource use, climate change potential and primary energy demand. It is found, that the product shows a lower demand for natural resources when produced via AM, but higher carbon emissions and energy demand when using a steel, that is mainly (80%) produced from high-alloyed steel scrap. However, different case studies during the sensitivity analyses showed that a number of factors highly influence the results: the steel source as well as the source of electricity play a major role in determining the environmental performance of the production routes. The authors also found that other production processes (here cold forging of tubes) might be an eco-friendly alternative to both routes, if feasible from an economic point of view.
In regard to the material characteristics, experimental testing revealed that the material advantages of AM produced hose nozzles (in particular higher yield strength) are reduced after a solution heat treatment is applied to the as-produced material, in order to increase corrosion resistance. However, products that do not require this production step might benefit from the higher yield strength, as a lower wall thickness could be realised.
Urban energy systems have been commonly considered to be socio-technical systems within the boundaries of an urban area. However, recent literature challenges this notion in that it urges researchers to look at the wider interactions and influences of urban energy systems wherein the socio-technical sphere is expanded to political, environmental and economic realms as well. In addition to the inter-sectoral linkages, the diverse agents and multilevel governance trends of energy sustainability in the dynamic environment of cities make the urban energy landscape a complex one. There is a strong case then for establishing a new conceptualisation of urban energy systems that builds upon these contemporary understandings of such systems. We argue that the complex systems approach can be suitable for this. In this paper, we propose a pilot framework for understanding urban energy systems using complex systems theory as an integrating plane. We review the multiple streams of urban energy literature to identify the contemporary discussions and construct this framework that can serve as a common ontological understanding for the different scholarships studying urban energy systems. We conclude the paper by highlighting the ways in which the framework can serve some of the relevant communities.
To contribute to a better understanding of consumer food leftovers and to facilitate their reduction in out-of-home settings, our study analyzes the effects of two common intervention strategies for reducing leftovers in a holistic behavioral model. Based on a quasi-experimental baseline-intervention design, we analyzed how the display of information posters and the reduction of portion sizes take an effect on personal, social and environmental determinants in a structural equation model. Applying data from online surveys and observations among 880 guests (503 baseline, 377 intervention) during two weeks in a university canteen, the suggested model allows to assign effects from the two interventions on plate leftovers to specific changes in behavioral determinants. Portion size reductions for target dishes are found to relate to lower levels of plate waste based on conscious perception, represented in smaller portion size ratings. Effects from seeing information posters are found to base on changed personal attitudes, subjective norms and perceived behavioral control. However, depending on how an individual reacts to the information (by only making an effort to finish all food or by making an effort and additionally choosing a different dish in the canteen) there are opposite effects on these determinants and consequently also on plate leftovers. Overall, the differentiated results on intervention effects strongly support the benefits of more holistic and in-depth analyses of interventions to reduce plate leftovers and therefore to contribute to more sustainable food consumption in out-of-home settings.
The implementation of energy efficiency improvement actions not only yields energy and greenhouse gas emission savings, but also leads to other multiple impacts such as air pollution reductions and subsequent health and eco-system effects, resource impacts, economic effects on labour markets, aggregate demand and energy prices or on energy security. While many of these impacts have been studied in previous research, this work quantifies them in one consistent framework based on a common underlying bottom-up funded energy efficiency scenario across the EU. These scenario data are used to quantify multiple impacts by energy efficiency improvement action and for all EU28 member states using existing approaches and partially further developing methodologies. Where possible, impacts are integrated into cost-benefit analyses. We find that with a conservative estimate, multiple impacts sum up to a size of at least 50% of energy cost savings, with substantial impacts coming from e.g., air pollution, energy poverty reduction and economic impacts.
Many countries are increasingly investing in renewable energy technologies to meet growing energy demands and increase the security of their energy supply. This development is also evident in the Middle East and North Africa (MENA) region, where renewable energy targets and policies have evolved rapidly in recent years. There is a steady increase in both the number of planned and implemented solar photovoltaic (PV) but also of solar thermal projects in form of Concentrating Solar Power (CSP) plants. Many of these installations are designed as large utility-scale systems. Despite the fact that these types of large-scale projects can have significant effects on local communities and their livelihoods, the existing research into the social impacts of such large-scale renewable energy infrastructures at local level is limited. However, assessing and managing these impacts is becoming increasingly important to reduce risks to both the affected communities and to the project and businesses activities. In order to provide more robust evidence on the local effects, this research study reviews the social impacts of large-scale renewable energy infrastructure in the MENA region based on a case study of the NOORo I CSP plant in Ouarzazate, Morocco. Data collected during two empirical field studies, in combination with expert interviews and secondary data analysis, provides detailed evidence on the type and significance of livelihood impacts of the NOORo I CSP plant. The analysis results in a consolidated list of 30 impacts and their significance levels for different stakeholder groups including farmers, young people, women, community representatives and owners of small and medium enterprises. The results show that, overall, the infrastructure development was received positively. The review also indicates that factors identified as having effects on the sustainability of local livelihoods are mainly related to information management and benefit distribution, rather than physical or material aspects.
In 2016, the European Commission presented the Clean Energy for all Europeans Package , comprising legislative proposals to facilitate the clean energy transition within the EU, such as the revised EPBD 2010/31/EU and EED 2012/27/EU.Besides putting energy efficiency first and achieving global leadership in renewable energy, a third goal of the package was to provide a "fair deal to consumers" with "no one left behind"., While in some Member States the issue of energy poverty already was on the political agenda, enabling affordable access to basic energy services for all households and thus reducing energy poverty is now an explicit policy target of the revised EU Directives.
In order to assess and monitor the extent of the issue across the EU and address it by suitable measures, the concept of energy poverty needs to be defined, operationalised and measured. The paper aims to investigate the role of energy poverty indicators for policy making. To do so, it provides an overview on existing measurement approaches.Furthermore, the paper presents the development and current state of energy poverty across the EU using a set of four complementary indicators used by the EU Energy Poverty Observatory. These consensual and expenditure-based indicators are calculated using data from the EU Survey on Income and Living Conditions and the Household Budget Survey.
In addition, the paper highlights peculiarities of results on the different indicators, describes persisting issues with regard to their calculation and interpretation against the background of the underlying data base.
Based on the results of this analysis, further necessities of data collection and research are pointed out.
Improvements in energy efficiency have numerous impacts additional to energy and greenhouse gas savings. This paper presents key findings and policy recommendations of the COMBI project ("Calculating and Operationalising the Multiple Benefits of Energy Efficiency in Europe").
This project aimed at quantifying the energy and non-energy impacts that a realisation of the EU energy efficiency potential would have in 2030. It covered the most relevant technical energy efficiency improvement actions in buildings, transport and industry.
Quantified impacts include reduced air pollution (and its effects on human health, eco-systems), improved social welfare (health, productivity), saved biotic and abiotic resources, effects on the energy system and energy security, and the economy (employment, GDP, public budgets and energy/EU-ETS prices). The paper shows that a more ambitious energy efficiency policy in Europe would lead to substantial impacts: overall, in 2030 alone, monetized multiple impacts (MI) would amount to 61 bn Euros per year in 2030, i.e. corresponding to approx. 50% of energy cost savings (131 bn Euros).
Consequently, the conservative CBA approach of COMBI yields that including MI quantifications to energy efficiency impact assessments would increase the benefit side by at least 50-70%. As this analysis excludes numerous impacts that could either not be quantified or monetized or where any double-counting potential exists, actual benefits may be much larger.
Based on these findings, the paper formulates several recommendations for EU policy making:
(1) the inclusion of MI into the assessment of policy instruments and scenarios,
(2) the need of reliable MI quantifications for policy design and target setting,
(3) the use of MI for encouraging inter-departmental and cross-sectoral cooperation in policy making to pursue common goals, and
(4) the importance of MI evaluations for their communication and promotion to decision-makers, stakeholders, investors and the general public.
What role do transaction costs play in energy efficiency improvements and how can they be reduced?
(2019)
Ex-ante policy evaluation requires a detailed understanding of how the subjects addressed by the policy react to its implementation. In the context of energy efficiency, policy measures typically aim at influencing investment decisions towards more efficient options.
As has been discussed widely in the context of the "energy efficiency gap", investments in energy efficiency improvements are frequently not conducted even though they seem cost-effective from a simple cost-benefit perspective, where transaction costs have been identified as one important barrier.
While transaction costs have been discussed widely from a conceptional perspective, empirical studies quantifying transaction costs and measures to reduce them are rare. This paper presents approaches, results and insights from a recently completed research project funded by the German Federal Energy Efficiency Center (BfEE), addressing transaction costs in various energy efficiency measures and the role of energy efficiency services to overcome the barrier.
We analyse a set of 11 energy efficiency investments covering private households, public institutions and the industry sector. We gather data on direct investment costs and energy cost savings and provide a detailed analysis of the various barriers and transaction costs associated with the implementation. We then analyse the costs of existing energy efficiency services using data provided by the BfEE. We compare the different cost elements and analyze the potential of energy efficiency services to reduce transaction costs.
We find that the role of transaction costs differs substantially between households, public institutions and companies and that the impact of energy efficiency services on transaction costs needs to be evaluated using different methodological approaches. We conclude that while data availability on disaggregated transaction costs is a major challenge, energy services can reduce transaction costs considerably.
In spite of differences in energy policies and supply, Japan and Germany have to master similar challenges: To reorganize the energy supply system towards - in the long term - being reliable, affordable, low in risks and resource use, and climate-neutral. At the same time, the ecological modernization should maintain or even strengthen international competitiveness. To better address these challenges, a bi-national expert council has been established between the two high-tech countries in 2016 - the GJETC.
The aim of the GJETC is to show that despite different starting points, a national energy transition can be more successful, if both countries learn from their strengths and also weaknesses, to avoid the latter. If the implementation of an energy transition in the two countries is socially and economically sound and advances technology innovation and deployment, it may not only double success, but can also serve as blue prints for other countries, especially due to learning from similarities and differences. For example: Why is per capita energy consumption higher in transport in Germany, but energy intensity higher in Japan's building sector? How can variable renewable energies be integrated in an efficient energy system at lowest costs?
The Council meets twice a year, holds stakeholder dialogues and outreach events, and prepares policy papers on strategic topics of mutual interest. Four comprehensive studies, each in cooperation of a German and a Japanese research institute, have been the basis for 15 joint key recommendations during the 1st phase. The 2nd phase to 2020 will study the role of hydrogen and digitalisation for the energy transition, as well as other topics. The paper presents the findings and recommendations of the GJETC of the first phase 2016-18 as well as first results of the second phase. It also reviews the setup of the GJETC and the way it works, to assess if and how it can serve as a role model of bilateral cooperation on the energy transition.
Europe needs a new vision of progress. An energy transition has this potential. It can give the "European idea" a future-oriented content. The goal for 2050 is clear: a Europe without fossil and nuclear energy! This is not a utopia. Studies, resolutions of the EU and some member states prove that this vision is feasible and has many advantages: more jobs, more security of supply, fewer premature deaths due to air pollution, reduction of resource conflicts, falling energy costs. New green lead markets for renewable energies and resource efficiency are emerging. A European energy transition requires an alliance, ideally fuelled by neighbours France and Germany. Many are hoping for Germany as a driver of nuclear and coal phase-out. But deciding on "revolutionary goals" is not enough: finally implementing them is what Germany and Europe are waiting for. This report shows which concrete steps can advance this vision of progress.
Estimating the sufficiency potential in buildings : the space between underdimensioned and oversized
(2019)
The emission reduction potential of energy efficiency and energy supply in buildings is estimated in various energy and climate action plans, scenarios, and potential analyses. But the third pillar of sustainability - sufficiency - is neglected in most studies.The increasing demand of space per person in the residential sector is a trend in most European countries. Its implication on energy use, demand for resources like land, building material, equipment, and waste production is enormous. Next to the ecological impact, the distribution of space has social and societal effects. Thus, sufficiency policies in the building sector complementing efficiency and energy policy are needed for a sustainable development of the European building stock.
But how can a sufficiency potential in the building sector be estimated? How much space and equipment is needed for a decent living and how much is too much? The paper proposes four areas of sufficiency in buildings: space, design and construction, equipment, and use. It presents a set of indicators, a quantitative estimate of energy savings from reduced per capita floor area, and visualises the sufficiency potential in European countries in an experimental approach. The final discussion focuses on the question: What does this mean for policy making?
Addressing food waste prevention is one target of the Sustainable Development Goals (SDGs) and a major task for the UN Environmental Programme and the European Commission. It is promising in terms of its environmental saving potential. However, it also leads to consumers being able to save money, which they then are likely to spend, thus again causing a negative environmental impact. This dimension of the so-called indirect rebound effect, which prevents the desired ecological benefits from being achieved, is investigated in this paper. By using a single-region environmentally extended input-output model from a production perspective, the indirect rebound effects from food waste prevention in Germany are analysed. Any political action needs to consider not only a differentiation in income class, but also alternative concepts such as the principles of sufficiency in order to achieve all ecological benefits and specifically the third target of SDG 12.
Additionality revisited : guarding the integrity of market mechanisms under the Paris agreement
(2019)
The Paris Agreement requires mitigation contributions from all Parties. Therefore, the determination of additionality of activities under the market mechanisms of its Article 6 will need to be revisited. This paper provides recommendations on how to operationalize additionality under Article 6. We first review generic definitions of additionality and current approaches for testing of additionality before discussing under which conditions additionality testing of specific activities or policies is still necessary under the new context of the Paris Agreement, that is, in order to prevent increases of global emissions. We argue that the possibility of "hot air" generation under nationally-determined contributions (NDCs) requires an independent check of the NDC's ambition. If the NDC of the transferring country does contain "hot air", or if the transferred emission reductions are not covered by the NDC, a dedicated additionality test should be required. While additionality tests of projects and programmes could continue to be done through investment analysis, for policy instruments new approaches are required. They should be differentiated according to type of policy instrument. For regulation, we suggest calculating the resulting pay-back period for technology users. If the regulation generates investments exceeding a payback period threshold, it could be deemed additional. Similarly, carbon pricing policies that generate a carbon price exceeding a threshold could qualify; for trading schemes an absence of over-allocation needs to be shown. The threshold should be differentiated according to country categories and rise over time.
The Global Stocktake (GST) takes a central role within the architecture of the Paris Agreement, with many hoping that it will become a catalyst for increased mitigation ambition. This paper outlines four governance functions for an ideal GST: pacemaker, ensurer of accountability, driver of ambition and provider of guidance and signal. The GST can set the pace of progress by stimulating and synchronizing policy processes across governance levels. It can ensure accountability of Parties through transparency and public information sharing. Ambition can be enhanced through benchmarks for action and transformative learning. By reiterating and refining the long term visions, it can echo and amplify the guidance and signal provided by the Paris Agreement. The paper further outlines preconditions for the effective performance of these functions. Process-related conditions include: a public appraisal of inputs; a facilitative format that can develop specific recommendations; high-level endorsement to amplify the message and effectively inform national climate policy agendas; and an appropriate schedule, especially with respect to the transparency framework. Underlying information provided by Parties complemented with other (scientific) sources needs to enable benchmark setting for collective climate action, to allow for transparent assessments of the state of emissions and progress of a low-carbon transformation. The information also needs to be politically relevant and concrete enough to trigger enhancement of ambition. We conclude that meeting these conditions would enable an ideal GST and maximize its catalytic effect.
"400,000 new homes per year are needed in German cities." This figure has been cited repeatedly in political discussions, media, and statements of different groups for a couple of years now. Living space is needed to mitigate the (further) inordinate increase of rents in some cities and regions and to ease finding appropriate flats at affordable prices for low- and medium-income households. But how to activate investors and the real estate market?
Having the triangle of sustainability in mind with its ecologic, social and economic cornerstones the discussion - metaphorically spoken - currently pulls the three corners: Which should have the highest priority?
The economically driven most favourable solution is lowering the requirements for new buildings such as the energy performance to make building cheaper. The social perspective prefers an increase of public social housing investments regardless of efficiency standards. And the ecological side argues that a high performance is needed to reach energy and climate targets in the buildings sector.
Starting at this point of discussion, firstly, the paper reflects the assumptions behind the numbers of new homes needed against a sufficiency background.
Secondly, it presents current changes in German building policies: a new legislation for energy supply and efficiency is currently in preparation.
It discusses the potential to integrate sufficiency aspects in building policies, focussing specifically on the new regulation, financial incentives, and energy advice.
The paper analyses if and to what extent it is likely to balance the three cornerstones of sustainability by integrating sufficiency aspects into efficiency policies. Household experiences with prepayment meters are used as an example to illustrate the potential for tapping efficiency and sufficiency potentials in low-income households considering social, economic, and ecological aspects. Based on the identified (in)consistencies, thirdly, it suggests further development in German policies to make better use of synergies between the ecologic, social and economic demands on buildings.
Footprint calculators are efficient tools to monitor the environmental impact of private consumption. We present the results of an analysis of data entered into an online Material Footprint calculator undertaken to identify the socioeconomic drivers of the Material Footprint in different areas of consumption, from housing to holidaymaking. We developed regression models to reveal (1) the impact of socioeconomic characteristics on Material Footprints of private households and (2) correlations between the components of Material Footprints for different arrays of consumption. Our results show that an increasing Material Footprint in one array of consumption comes with an increasing Material Footprint in all other arrays, with the exception of housing and holidaymaking. The socioeconomic characteristics of users have a significant impact on their Material Footprints. However, this impact varies by the array of consumption. Households only exhibit generally bigger Material Footprints as a result of higher incomes and larger dwellings. We conclude that indicators which strive to monitor resource efficiency should survey disaggregated data in order to classify the resource use to different population groups and arrays of consumption.
How can existing national climate policy instruments contribute to ETS development? : Final report
(2019)
Before introducing an emissions trading system, jurisdictions have to consider the ex-isting energy and climate policy framework. This report seeks to analyse and evaluate non-ETS climate policy instruments, such as carbon taxes or green certificate trading schemes, regarding their suitability to serve as a basis for establishing emission trading systems. There is a general assessment of prototypical policy instruments. Besides, the report contains insights from case studies in India and Mexico. The report is meant to inform ETS development by showing how existing policy instruments could contribute to this process and by illustrating how non-ETS policy instruments could coexist with an emissions trading system, allowing for an effective policy mix.
Green Information Systems in general, and footprint calculators in particular, are promising feedback tools to assist people in adopting sustainable behaviour. Therefore, a Material Footprint model for use in an online footprint calculator was developed by identifying the most important predictors of the Material Footprint of the calculator's users. By means of statistical learning, the analysis revealed that 22 of the 95 predictors identified accounted for 74% of the variance in Material Footprints. Ten predictors out of the 95, mainly from the mobility domain, were capable of showing a prediction accuracy of 61%. The authors conclude that 22 predictors from the areas of mobility, housing and nutrition, as well as sociodemographic information, accurately predict a person's Material Footprint. The short and concise Material Footprint model may help developers and researchers to enhance their information systems with additional items while ensuring the data quality of such applications.
Global climate
(2019)
The twenty-third Conference of the Parties (COP-23) of the United Nations Framework Convention on Climate Change (UNFCCC) was held in Bonn on 6-17 November 2017, under the presidency of Fiji. COP-23 focused, in particular, on developing rules to implement the 2015 Paris Agreement and on raising ambition for climate protection. Since this was the first "Oceanic" COP, special attention was given to supporting the countries of the Global South in their efforts to reduce emissions, adapt to climate change, and deal with the unavoidable impacts of climate change. This article summarizes the main developments and results of COP-23.
The transformation of cities towards sustainable and inclusive development is a key objective of the New Urban Agenda (United Nations 2017). Transport infrastructure is a critical factor in shaping cities, determining the energy intensity of mobility and providing access to essential social and economic opportunities. The sector also plays an important role in global climate change mitigation strategies, as it currently accounts for about 23% of global energy-related greenhouse gas emissions (IPCC 2014).
There is substantial potential to improve urban access, air quality, safety and the quality of life in cities along with reducing Greenhouse Gas Emissions if an integrated policy approach is applied that combines all intervention areas for transport policy and involves all levels of government. A package that achieves low-carbon transport and fosters sustainable developed includes avoided journeys through compact urban design and shifts to more efficient modes of transport, uptake of improved vehicle and engine performance technologies, low-carbon fuels, investments in related infrastructure, and changes in the built environment. From a governance perspective, all relevant political institutions at the local and national level need to be involved in the coalition building along with key societal actors, such as unions, industry and civil society organisations. Bringing the policy objectives of these actors together with an integrated policy package is a vital step towards a low-carbon, sustainable mobility system.
Policy design and governance are critically interlinked as the ability of institutions to find a political consensus and to maintain policy stability heavily influences the success of measures to shape the transformation pathway towards sustainable mobility. This thesis aims to analyse these linkages and highlight the role of different policy and governance approaches. This analysis builds on transport and urban development research, but takes a transdisciplinary research perspective, building on the Multi-Level-Perspective on sustainability transitions (Geels 2002) and aims to highlight the potential for a consensus oriented policy approach (Lijphard 1999) that builds on co-benefits among key policy objectives and coalitions among key political actors, which leads to the main question for this thesis and the focus areas for the analysis.
Last year's conference of the global climate change regime took place from 2 until 15 December 2018 in Katowice, Poland. The conference had two main objectives: operationalising the Paris Agreement by adopting detailed rules for its implementation, and starting the process of strengthening Parties' climate protection contributions. This article covers the negotiations on these two sets of issues and also includes a discussion of other recent climate activities by Parties and non-Party actors. Success of the negotiations in Katowice was far from assured, but in the end COP24 concluded with the adoption of the "Katowice Climate Package" setting out detailed guidelines on how to implement its various elements. However, the conference fell short on the first objective, none of the major emitting countries was ready to step up its climate ambition. The most important aspect of the Katowice outcome is therefore that it has brought the wrangling about implementation procedures to a close, making way for the true task at hand: the strengthening of national and international activities to protect the climate and the implementation of the existing pledges. Arguably, a key factor that has been slowing down climate policy is the power of entrenched interests. The article therefore concludes with a reflection on how such barriers to climate action may be overcome and what role future COPs may play in this regard.
Each year, approximately one-third of the food produced for human consumption is lost or wasted worldwide. The waste of resources used for this food has significant environmental impacts in terms of land and water use as well as greenhouse gas emissions. Consequently, one of the targets of the UN sustainable development goals is to halve per capita global food waste at the retail and consumer levels and reduce food losses along production and supply chains by 2030. However, sufficient knowledge about the suitability of instruments for food waste prevention is still lacking. The purpose of this paper is therefore threefold: first, it outlines the generation and causes of food losses and waste. Second, it discusses good practices from different countries, such as laws to reduce food waste, voluntary agreements, awareness campaigns and results from behavioural economics. Finally, based on these findings, this paper identifies barriers to as well as requirements for the implementation of effective and efficient instruments.
On 26 January 2019, the Commission on Growth, Structural Change and Employment recommended that no more coal-fired power plants would be operated in Germany by 2038 at the latest. In this paper the Wuppertal Institute comments on the results of the Commission and makes recommendations for the current necessary steps for the climate and innovation policy in Europe, Germany and North Rhine-Westphalia.
The Paris Agreement introduces long-term strategies as an instrument to inform progressively more ambitious emission reduction objectives, while holding development goals paramount in the context of national circumstances. In the lead up to the twenty-first Conference of the Parties, the Deep Decarbonization Pathways Project developed mid-century low-emission pathways for 16 countries, based on an innovative pathway design framework. In this Perspective, we describe this framework and show how it can support the development of sectorally and technologically detailed, policy-relevant and country-driven strategies consistent with the Paris Agreement climate goal. We also discuss how this framework can be used to engage stakeholder input and buy-in; design implementation policy packages; reveal necessary technological, financial and institutional enabling conditions; and support global stocktaking and increasing of ambition.
Before linking emissions trading systems, there should be a good understanding of the expected economic implications: How could linking affect the development of the common allowance price, the development of emissions or industrial production, capital flows or liquidity? Answering these questions requires a multitude of data and assumptions and therefore usually the use of economic models.
This report gives an overview of various economic models that are suitable for assessing the economic effects of linking. It analyses the economic indicators relevant for the assessment of the effects of linking, formulates requirements for economic models to answer this question, discusses the advantages and disadvantages of different modelling approaches and gives an assessment of which models are suitable in principle for the assessment of linking. Five models were selected for a more detailed description: E3ME, GEM-E3, PACE, POLES, and TIMES-MARKAL.
The "fuzzy front end" of innovation is argued to be crucial for the success and sustainability impact of a final product. Indeed, it is a promising area of focus in efforts to achieve the United Nations' 2015 Sustainable Development Goals (SDGs), which provide a globally accepted framework for sustainability. However, the usability of the 17 goals and the large number of sub-goals represent barriers to innovation practitioners. Moreover, this early innovation stage proves to be a challenge for corporate practitioners and innovators, largely due to the concept's intangible, qualitative nature and the lack of data. To help overcome these barriers, this article proposes a four-stage approach for structuring the innovation process using an online tool called the "SDG-Check", which help assess an innovator's sustainability orientation in the early phases of product and service development. It is a semi-quantitative tool to gather and combine assessments by experts involved in innovation processes with implications for the United Nations' SDGs. Furthermore, this article presents our first experiences in applying the SDG-Check based on three living lab innovation cases. The results indicate that the tools can support and inspire a dialogue with internal and external stakeholders with regards to sustainability considerations in the early design stages of product and service development.
Today more than 45 % of all energy-related CO2 emissions come from burning coal. Thus, reducing CO2 emissions from coal use is a necessity for reaching the targets of the Paris Agreement. This will not only pose challenges for coal consumers (restructuring of the energy system), but also for countries whose economy is strongly depending on the production of coal. This paper examines the role of coal in three countries, which are or were in recent years among the top coal exporters: Indonesia, Colombia and Vietnam. Understanding challenges and possible transition pathways in these countries will help to develop global strategies to reduce CO2 emissions from coal in the short to mid-term.
Research on sustainability transitions has expanded rapidly in the last ten years, diversified in terms of topics and geographical applications, and deepened with respect to theories and methods. This article provides an extensive review and an updated research agenda for the field, classified into nine main themes: understanding transitions; power, agency and politics; governing transitions; civil society, culture and social movements; businesses and industries; transitions in practice and everyday life; geography of transitions; ethical aspects; and methodologies. The review shows that the scope of sustainability transitions research has broadened and connections to established disciplines have grown stronger. At the same time, we see that the grand challenges related to sustainability remain unsolved, calling for continued efforts and an acceleration of ongoing transitions. Transition studies can play a key role in this regard by creating new perspectives, approaches and understanding and helping to move society in the direction of sustainability.
Phasing out coal in the German energy sector : interdependencies, challenges and potential solutions
(2019)
Relevant aspects of the options and requirements for reducing and phasing out coal-fired power generation have been under debate for several years. This process has produced a range of strategies, analyses and arguments, outlining how coal use in the energy sector could be reduced and phased out in the planned time frame, and determining structural policy measures suitable to support this. This Coal Report studies the existing analyses and provides an overview of the state of debate. It is intended to provide information on facts and contexts, present the advantages and disadvantages of individual courses of action, and reveal the respective scientific backgrounds. It strives to take a scientific and independent approach, and present facts in concise language, making it easy to follow for readers who are not experts in the field, without excessive abridgements or provocative statements.
Sulphate aerosols are dominated by SO2 emissions from coal-burning for the Indian electricity sector and they are thought to have a short term but significant, negative impact on South Asian Summer Monsoon rainfall. This reduction in precipitation in turn can lead to reduced economic outputs, primarily through smaller agricultural yields. By bringing together estimates of (a) the impact of sulphate aerosols on precipitation and (b) the observed relationship between monsoon rainfall and GDP, we present a methodology to estimate the possible financial cost of this effect on the Indian economy and on its agricultural sector. Our preliminary estimate is that the derived benefits could be large enough that around 50% of India's SO2 emissions could be economically mitigated at no cost or net benefit, although it should be noted that the large uncertainties in the underlying relationships mean that the overall uncertainty is also large. Comparison of the 1952-1981 and 1982-2011 periods indicates that the Indian economy may now be more resilient to variability of the monsoon rainfall. As such, a case could be made for action to reduce SO2 emissions, particularly in the crucial monsoon period. This would have a significant, positive effect on a crucial and large sector in India's economy and the effects would be visible almost instantly. The recent growth in renewable energy sources in India and the consequent, reduced increase in coal burning means that further financial costs have already been avoided. This impact should be further investigated so that it can be included in cost-benefit analyses of different fuel types in the region. The significant uncertainties associated with these calculations are discussed.
Sustainable Urban Mobility Pathways examines how sustainable urban mobility solutions contribute to achieving worldwide sustainable development and global climate change targets, while also identifying barriers to implementation and strategies to overcome them. Building on city-to-city cooperation experiences in Europe, Asia, Africa and Latin America, the book examines key challenges in the context of the Paris Agreement, UN Sustainable Development Goals and the New Urban Agenda, including policies needed to achieve a sustainable, low-carbon pathway for transport and how an integrated policy strategy is designed to provide a basis for political coalitions.
The book explores which institutional framework creates sufficient political stability and continuity to foster the take-up of and long-term support for sustainable transport strategies. The linkages of climate change and wider sustainable development objectives are covered, including success stories, best practices, and quantitative analysis for key emerging economies in public transport, walking, cycling, freight and logistics, vehicle technology and fuels, urban planning and integration, and national framework policies.
Sustainable Development Goals and the Paris Agreement stand as milestone diplomatic achievements. However, immense discrepancies between political commitments and governmental action remain. Combined national climate commitments fall far short of the Paris Agreement's 1.5/2°C targets. Similar political ambition gaps persist across various areas of sustainable development. Many therefore argue that actions by nonstate actors, such as businesses and investors, cities and regions, and nongovernmental organizations (NGOs), are crucial. These voices have resonated across the United Nations (UN) system, leading to growing recognition, promotion, and mobilization of such actions in ever greater numbers. This article investigates optimistic arguments about nonstate engagement, namely: (a) "the more the better"; (b) "everybody wins"; (c) "everyone does their part"; and (d) "more brings more." However, these optimistic arguments may not be matched in practice due to governance risks. The current emphasis on quantifiable impacts may lead to the under-appreciation of variegated social, economic, and environmental impacts. Claims that everybody stands to benefit may easily be contradicted by outcomes that are not in line with priorities and needs in developing countries. Despite the seeming depoliticization of the role of nonstate actors in implementation, actions may still lead to politically contentious outcomes. Finally, nonstate climate and sustainability actions may not be self-reinforcing but may heavily depend on supporting mechanisms. The article concludes with governance risk-reduction strategies that can be combined to maximize nonstate potential in sustainable and climate-resilient transformations.
The current global momentum for carbon pricing has lately produced innovative hybrids: carbon taxes allowing the use of offsets from emission sources not targeted by the carbon tax for compliance with the tax load. This study aims at filling the knowledge gap in existing literature by exploring the potential impacts of domestic offset components in carbon taxes on mitigation of national emissions, including the country examples Colombia, Mexico and South Africa.
The findings indicate that the use of offsets in carbon taxes may significantly influence mitigation of national emissions both positively and negatively. On the one hand, this model may result in real emission reductions from offset projects and positive spillover effects of efforts to reduce emissions from emission sources covered by the carbon tax to other emission sources. Furthermore, the offsetting component can be used as a bargaining chip in political negotiations facilitating the introduction of mitigation policies and measures and/or strengthening their ambition level. On the other hand, it also entails serious risks: Offsetting could compromise the environmental integrity of the carbon tax through low-quality offsets. Furthermore, offsets reduce incentives to curb emissions in the emission sources covered by the carbon tax, potentially leading to carbon lock-in effects. Moreover, an offsetting component could provoke opposition to further climate policies and measures for emission sources generating offsets, as replacing the offsetting component with mandatory emission reduction policies would eliminate revenues from offset credits. General opposition of stakeholder groups to the introduction of offsets may even hinder the introduction of carbon pricing instruments and offsetting altogether.
The study identifies options that could be employed to increase potential positive effects of introducing an offset component to a carbon tax and mitigate related risks, pointing to the country examples included, where appropriate.
Energy sufficiency has recently gained increasing attention as a way to limit and reduce total energy consumption of households and overall. This paper presents both the partly new methods and the results of a comprehensive analysis of a micro- and meso-level energy sufficiency policy package to make electricity use in the home more sufficient and reduce at least the growth in per-capita dwelling size. The objective is to find out how policy can support households and their members, as individuals or as caregivers, but also manufacturers and local authorities in practicing energy sufficiency. This analysis needed an adapted and partly new set of methods we developed. Energy sufficiency does not only face barriers like energy efficiency, but also potential restrictions for certain household members or characteristics, and sometimes, preconditions have to be met to make more energy-sufficient routines and practices possible. All of this was analysed in detail to derive recommendations for which policy instruments need to be combined to an effective policy package for energy sufficiency. Energy efficiency and energy sufficiency should not be seen as opposed to each other but work in the same direction - saving energy. Therefore, some energy sufficiency policy instruments may be the same as for energy efficiency, such as energy pricing policies. Some may simply adapt technology-specific energy efficiency policy instruments. Examples include progressive appliance efficiency standards, standards based on absolute consumption, or providing energy advice. However, sufficiency may also require new policy approaches. They may range from promotion of completely different services for food and clothes cleaning, to instruments for limiting average dwelling floor area per person, or to a cap-and-trade system for the total electricity sales of a supplier to its customers, instead of an energy efficiency obligation.
The potential of mixed-mode office buildings with varying design and control parameters is examined by using an uncertainty analysis in the three climate zones of India. The analysis is in terms of cooling energy consumption, thermal comfort conditions, and natural ventilation hours. Furthermore, influential parameters are identified using sensitivity analysis. In this study, opening the windows enables natural ventilation. Night-time ventilation through the windows is not enabled because these are mostly closed at night. A maximum natural ventilation of 10% of the total building occupancy hours are observed in warm and humid, and hot and dry climates; however, they are slightly higher in the composite climate. A further increase in the number of natural ventilation hours leads to an increase in the occupancy hours outside the Indian Model for Adaptive Comfort model for mixed-mode buildings with at least 90% of occupants are satisfied. There are no occupancy hours outside of 80% of occupants are satisfied. The choice of thermal comfort band is crucial for determining the potential of mixed-mode buildings. The cooling setpoint temperature, building size, window solar heat gain coefficient, and surface properties of exterior surfaces are identified as the more influential parameters than the thermophysical properties of building envelope constructions. Although the building envelope which is in compliance with the Energy Efficient Building Code of India increases energy efficiency during air-conditioning periods, whether it reduces natural ventilation hours, because of overheating during such period remains to be determined.
India's present development trajectory is at a crucial juncture with a requirement to meet the demands of a population of over 1.2 billion while ensuring environmental sustainability. The resulting economic growth over the past two decades has over-exploited finite natural resources and led to tremendous environmental degradation. Therefore, decoupling economic growth from resource consumption is crucial in the transformation towards a green economy. Building construction is one of the most resource-intensive sectors, as well as creating a high impact on the environment. This study analyzes existing mechanisms in India's building construction sector that attempt to decouple economic growth from resource use and environmental impacts. The key contributors for decoupling are analyzed. Recommendations for regulations, market incentives, transparency, data monitoring and capacity-building are provided for an array of policy initiatives targeted at political and financial decision-makers at the national, state and local levels for different buildings.
Ahead of the Conference of Parties (COP) 24 where countries will first take stock of climate action post Paris, this paper assesses India's progress on its nationally determined contribution (NDC) targets and future energy plans. We find that, although India is well on track to meet its NDC pledges, these targets were extremely modest given previous context. Furthermore, there is considerable uncertainty around India's energy policy post 2030 and if current plans for energy futures materialise, the Paris Agreement's 2 degrees goal will be almost certainly unachievable. India's role in international climate politics has shifted from obstructionism to leadership particularly following the announcement of withdrawal by the United States from the Paris Agreement, but analysis reveals that India's "hard" actions on the domestic front are inconsistent with its "soft" actions in the international climate policy arena. Going forward, India is likely to face increasing calls for stronger mitigation action and we suggest that this gap can be bridged by strengthening the links between India's foreign policy ambitions, international climate commitments, and domestic energy realities.
Digital platforms may yield a host of advantages in putting circular economy into effect. This paper analyses the related chances and discusses requirements of digital platforms for the realization of a circular economy. It specifically points to potential solutions offered by digital platforms for existing barriers. From there it identifies issues that need specific attendance to create economically and ecologically functional platforms. Three economically relevant perspectives are discussed for this: a management perspective, a legislative perspective and a social/systems perspective.
A policy mix for resource efficiency in the EU : key instruments, challenges and research needs
(2019)
Against the background of an often wasteful use of natural resources, the European Union has made resource efficiency a top policy priority. Policy formulation is, however, at a very early stage in many Member States, with often vague notions of what resource efficiency means, characterised by fragmented instruments and overlapping competencies. This paper develops a conceptual framework for defining, assessing and developing resource efficiency policy mixes. It argues that a mix of policies and instruments is best suited to overcoming the complex challenges of the 21st Century. Such a mix addresses multiple resource domains at a strategic, high level and contains interacting instruments targeting multiple actors, levels of governance and sectors and life-cycle stages of resource use. This paper looks at criteria for effective resource efficiency policy instruments, presents both an indicative policy mix across 9 policy domains and case studies (on environmental harmful subsidies, supply chain efficiency in food systems and product-service systems) and identifies key challenges to overcome trade-offs in instrument design, maximise synergies, reduce conflicts, promote coherence, coordinate activities and move from theory to practice. Research needs are discussed regarding who shall devise, implement, and coordinate such a policy mix, considering negotiating power, timing and complexity.
With the introduction of the Roadmap to a Resource Efficient Europe (2011) and the more recent commitment of The Action Plan towards the Circular Economy (2015), the European Commission (EC) has expressed its fundamental interest to substantially improve the resource efficiency of the European economy and enable the transition towards the Circular Economy (CE). This policy push has meanwhile been complemented by some quite ambitious national programmes for RE and CE and institutional advances but it is not yet bound to targets or mandatory reporting.
Against this background, the objective of this paper is to give a comprehensive overview of the current policy frameworks at EU and a selection of MSs and provide insights into the elements shaping policy processes. The analytical framework relies on three essential interconnected components: the policy framework, the economic incentive system and economic side policies which are relevant in the context of RE and CE and actor constellations. The paper does this looking at the interface between EU-MSs. The analysis is based on different empirical surveys in which the policy development is observed and discussed (EEA 2011, 2016a, 2016b, EIO 2013, 2014, 2016) and a comprehensive review of legislative and policy frameworks at the EU and selected MSs, undertaken as part of the project POLFREE (Policy option for a Resource-Efficient Economy) (Domenech et al., 2014, Bahn-Walkowiak et al., 2014). The analysis reveals that policy frameworks for RE/CE are complex and fragmented as competing goals and visions reduce effectiveness of measures. The paper makes recommendations as to how EU and MS policies could improve RE in a coordinated way, but recognizes that achieving such coordination will be challenging in the current political context.
Environment
(2019)
One world
(2019)