Refine
Has Fulltext
- no (82) (remove)
Year of Publication
Document Type
- Contribution to Periodical (37)
- Report (22)
- Part of a Book (10)
- Peer-Reviewed Article (5)
- Doctoral Thesis (3)
- Conference Object (2)
- Working Paper (2)
- Book (1)
Division
- Kreislaufwirtschaft (82) (remove)
Rohstoffe
(2016)
Stepping up waste prevention : challenges and opportunities for national waste prevention programmes
(2017)
The contribution of the EU bioeconomy to sustainable development depends on how it is implemented. A high innovation potential is accompanied by considerable risks, in particular regarding the exacerbation of global land use conflicts. This article argues that a systemic monitoring system capable of connecting human-environment interactions and multiple scales of analysis in a dynamic way is needed to ensure that the EU bioeconomy transition meets overarching goals, like the Sustainable Development Goals. The monitoring should be centered around a dashboard of key indicators and targets covering environmental, economic, and social aspects of the bioeconomy. With a focus on the land dimension, this article examines the strengths and weakness of different economic, environmental and integrated models and methods for monitoring and forecasting the development of the EU bioeconomy. The state of research on key indicators and targets, as well as research needs to integrate these aspects into existing modeling approaches, are assessed. The article concludes with key criteria for a systemic bioeconomy monitoring system.
Assessing global resource use : a systems approach to resource efficiency and pollution reduction
(2017)
Die ersten Stufen der Abfallhierarchie : Abfallvermeidung und Vorbereitung zur Wiederverwendung
(2018)
Digitaler Kreislauf
(2018)
The growing demand for timber, in particular for renewable energy, increases pressures on global forests and requires a robust monitoring system to ensure sustainability. This article takes a first step toward more systemic monitoring by asking how the global use of forests by EU consumers can be accounted for. Specifically, this article builds on and develops the method of global land use accounting to account for the EU-27's consumption of primary timber between 2002 and 2011 in terms of both volume and forest area. It assesses international trade flows for around 100 commodities and converts them into a volume of primary raw timber based on conversion values. Results reveal that both imports and exports increased over the assessed time period, with primary EU-27 timber estimated to be around 1 m3/cap in 2011. Gaps, uncertainty and a lack of harmonization regarding especially trade data and conversion values are key challenges to further improving the robustness of the method and reliability of results. Future research may focus on improving the method to address in particular recycled and recovered flows as well as the question of whether area or volume is the most appropriate metric for further development of a forest footprint indicator.
A policy mix for resource efficiency in the EU : key instruments, challenges and research needs
(2019)
Against the background of an often wasteful use of natural resources, the European Union has made resource efficiency a top policy priority. Policy formulation is, however, at a very early stage in many Member States, with often vague notions of what resource efficiency means, characterised by fragmented instruments and overlapping competencies. This paper develops a conceptual framework for defining, assessing and developing resource efficiency policy mixes. It argues that a mix of policies and instruments is best suited to overcoming the complex challenges of the 21st Century. Such a mix addresses multiple resource domains at a strategic, high level and contains interacting instruments targeting multiple actors, levels of governance and sectors and life-cycle stages of resource use. This paper looks at criteria for effective resource efficiency policy instruments, presents both an indicative policy mix across 9 policy domains and case studies (on environmental harmful subsidies, supply chain efficiency in food systems and product-service systems) and identifies key challenges to overcome trade-offs in instrument design, maximise synergies, reduce conflicts, promote coherence, coordinate activities and move from theory to practice. Research needs are discussed regarding who shall devise, implement, and coordinate such a policy mix, considering negotiating power, timing and complexity.
The earth as we know it can only continue to exist if humanity finds a way to switch to a sustainable use of energy and resources. This work contributes to the research carried out to achieve this goal by improving the coating of adsorptive materials. These are used in heat transformation and drying processes that allow for efficient temperature and humidity control in buildings. A central component of these adsorptive coatings is the binder that acts as "glue" in the manufacturing of the coating. In this work the methods to evaluate binder performance regarding their thermal stability under the process conditions, their mechanical stability and their influence on the adsorptive properties of the coating were established. The coatings have to meet special requirements due to the thermal stresses and low pressure atmosphere they experience in these applications. A selection of silicone binders was then characterized with the established tests according to these requirements. Additionally a selection of inorganic binders was investigated because they allow for the use of high desorption temperatures and thus a high energy efficiency of the process. Out of these binders Silres® MP50E emerged as the most promising one due to very good adsorptive properties of the coating, its good temperature stability and ease of use. While some of the inorganic binders showed very good adsorptive properties and temperature stability the mechanical stability of all inorganic binders was not sufficient for their use in adsorption heat transformation technology. This is the first time that a broad selection of binders was evaluated with regards to adsorptive coatings and the results published in literature. With a suitable binder identified, the next step was to optimize the coating of the heat exchangers in order to work out how to manufacture the most efficient and powerful heat exchangers. Samples with different coating thicknesses were manufactured in small scale and full scale and their adsorption behavior was characterized. It could be shown for the first time that it is possible to increase energy efficiency by improving the mass ration of adsorber to coating and increase the delivered power at the same time. This was shown for small and full scale samples. It was shown that under the corresponding conditions the heat transfer from the coating layer to the adsorber metal substrate is the limiting step in the process. These results can now be used for the planning and construction of adsorbers. With knowledge of a suitable binder and how to coat efficient, powerful adsorbers, the coating process itself was improved to allow for industrial scale manufacturing. A central point here is the ability to control slurry rheology. Out of many rheology additives those that are suited for the application in adsorption heat transformation were identified and their influence on the slurry rheology thoroughly characterized. Additionally the process of slurry preparation could be simplified for several different adsorbents. Here it was shown that the supersonic deagglomeration step is not necessary to prepare a slurry. Extending the possible coating techniques and in addition to the dip coating process used so far, the spray coating of adsorptive coatings was established for the first time in literature. This process is widely used in the industry and allows for easier plugin into existing coating processes. For the coating of high resolution patterns a proof of concept of the screen printing process was carried out.
Elektro- und Elektronikaltgeräte zählen zu den am schnellsten wachsenden Abfallströmen in Europa. Reparatur und Wiederverwendung können durch eine Verlängerung der Produktnutzungsdauer dazu beitragen, dass weniger Abfall entsorgt werden muss und Ressourcen durch die Vermeidung von Neuproduktion eingespart werden. In der Europäischen Abfallrahmenrichtlinie (2008/98/EG) wird der "Vorbereitung zur Wiederverwendung" ein hoher Stellenwert eingeräumt; die Abfallvermeidung hat, gefolgt von der "Vorbereitung zur Wiederverwendung", eindeutig Priorität gegenüber dem Recycling. Die Abfallhierarchie verspricht zwar implizit ökologische Vorteile der "Vorbereitung zur Wiederverwendung", allerdings wurden die institutionell-ökologischen Zusammenhänge des Konzepts in der Forschungsdebatte bislang vernachlässigt. Somit sind die tatsächlichen Ressourceneinsparpotenziale der "Vorbereitung zur Wiederverwendung" noch weitgehend unerforscht. Vor diesem Hintergrund zielt das Dissertationsprojekt darauf ab, ein Verständnis dafür zu entwickeln, wie spezifische Kontexte (beispielsweise die rechtlichen Rahmenbedingungen, ökonomische oder informatorische Aspekte) die "Vorbereitung zur Wiederverwendung" von Produkten aus der Ressourcenperspektive beeinflussen. Dafür wurden die institutionell-ökologischen Zusammenhänge der "Vorbereitung zur Wiederverwendung" integrativ betrachtet, und zwar mit Fokus auf ausgewählte Geräte - Flachbildmonitore (FlaMo's), Kaffeefiltermaschinen (KaFil's), Kaffeepadmaschinen (Ka-Pad's), Lautsprecherboxen (LauS) und Waschmaschinen (WaMa's) - und im Sinne einer vergleichenden Analyse von zwei abfallstrukturell-charakteristischen Regionen - Flandern und Nordrhein-Westfalen. Die interdisziplinäre Fragestellung der Arbeit erforderte die Anwendung qualitativer Methoden für die tiefgründige Untersuchung der "Vorbereitung zur Wiederverwendung" in den verschiedenen institutionellen Systemen, aber auch quantitative Methoden im Hinblick auf die zahlenmäßige Bewertung der Ressourceneinsparpotenziale. Zentrale Datenerhebungsinstrumente waren fallbeispielbezogene öffentliche Dokumente und Webseiten, die Analyse betriebsinterner Dokumentationen, Literaturauswertungen, Stichprobenerhebungen, Beobachtungen und Experteninterviews.
Ausweg aus dem Einweg? : Auswirkungen der Coronakrise auf das Verpackungsaufkommen in Deutschland
(2020)
Effectiveness and efficiency of food-waste prevention policies, circular economy, and food industry
(2020)
Künstliche Intelligenz in der Siedlungsabfallsortierung als Wegbereiter der Kreislaufwirtschaft
(2020)
With increasing world population and an unsettling resource scarcity in the back, sustainble consumption has moved to the foreground of political, economical and social discussions. One major school-of-thought is Circular Economy (CE), an approach summarizing various sustainable consumption activites under one roof. However, quantitative studies on the consumer are rare, yet crucial for a transfer from linear to circular consumption. This dissertation adds to literature by providing pioneer insights into consumer behavior in CE as an overarching concept, instead limiting research on singular subconcepts. Namely, four consumer activities are studied: recycling, upcycling, renting and sharing. In order to identify relevant insights for both academics and practitioners in CE, the research question ("what drives participation in CE?") is broken down into sub-hypotheses, which are addressed by three empirical studies. Using the SOR-Model (adaption Belk 1975) as overarching logic, the three studies deal with (1) the consumer (and their motivation) and situational stimuli (both (2) offline and (3) online). Respectively, three data sets are consulted to assess the sub-hypotheses and to identify overarching insights on how to accelerate consumer participation in CE, The research methodology employed ranges from a structured equation model (SEM), a random allocation field experiment during Fashion Week in Berlin to a discrete-choice model with best-worst scaling. The dissertation succeeds in revealing that (1) different activities in CE can be summarized in one latent variable, proving CE as a wholesome concept in consumer-related activities; that (2) Trust has a leveraging effect on participation in CE activities. Further, Trust can be enhanced offline via face-to-face interaction and online via third-party online attributes.; and that (3) experience in CE activities affects perception of online attributes, implying the need for adapted measures when dealing with CE-unexperienced consumers as compared to consumers with prior experience in CE activities.
Kunststoffverpackungen im geschlossenen Kreislauf : Potenziale, Bedingungen, Herausforderungen
(2021)
Die nachhaltigkeitsorientierte Transformation von urbanen Räumen ist eine akute Herausforderung. In den letzten Jahren haben koproduktive, experimentelle, transdisziplinäre und häufig informelle Stadtwandelprojekte als Such- und Lösungsräume hohe Sichtbarkeit erlangt. Schlüsselakteure hierfür stellen - so die These - Verwaltungsvertreter:innen einer integrierten Stadtentwicklung und -planung, Wissenschaftler:innen einer transformativen Forschung sowie zivilgesellschaftliche Stadtmacher:innen dar. Die Autor:innen, verankert in diesen drei Gruppen, kritisieren die häufig nur situative Zusammenarbeit dieser drei Akteursgruppen. Ein Modell der Zusammenarbeit im Spannungsfeld zwischen Gemeinsamkeiten, jeweiligen Potentialen und herausfordernden Eigenlogiken der Akteurssysteme wird entwickelt. Darauf aufbauend wird vorgestellt, wie durch strategischen Trialog und reflexive Lernprozesse die Zusammenarbeit verbessert und die Wirksamkeit koproduktiven und experimentellen Stadtwandels erhöht werden kann.
Ob die Rückführung von industriellen und gewerblichen Sekundärkunststoffen, das heißt von Abfällen bzw. von bereits wiederaufbereiteten Kunststoffrezyklaten, gelingen kann, ist von mehreren Faktoren wie insbesondere den spezifischen Materialeigenschaften, den Mengen, in denen sie anfallen, den aktuellen Marktpreisen (auch gegenüber Neuware) und auch der räumlichen Nähe von Sortier- bzw. Wiederaufbereitungsinfrastruktur abhängig. Trotz eigentlich guter Voraussetzungen für ein werkstoffliches Recycling, gelangen einzelne in Unternehmen anfallende Abfallchargen häufig in eine thermische Verwertung, weil sich ein Recycling wirtschaftlich nicht lohnt. Grund hierfür ist unter anderem, dass der Informationsaustausch zu den oben genannten Faktoren für Unternehmen häufig noch sehr mangelhaft ist.
Aktuell in Entwicklung befindliche digitale Plattformen und Applikationen sowie zugehörige Geschäfts- und Betreibermodelle, welche Kunststoffverarbeiter untereinander sowie Wertstofferzeuger und -verwerter vernetzen sollen, können künftig höhere Recyclingquoten ermöglichen und ökologische Einsparpotenziale heben.
Der Artikel führt Entwicklungen und Ergebnisse aktueller Forschungsprojekte zu solchen Vernetzungen zusammen, zeigt die aktuelle Situation des werkstofflichen Recyclings von industriellen und gewerblichen Kunststoffabfällen auf und beleuchtet welche Voraussetzungen für eine erfolgreiche Kreislaufführung von industriellen Kunststoffen gegeben sein müssen. Es wird insbesondere analysiert, in welcher Weise digitale Technologien und die durch sie erzielbare Informationstransparenz eine verbesserte Kreislaufwirtschaft bewirken können und in welcher Weise dies Wertschöpfungsnetzwerke räumlich beeinflussen kann.