Refine
Document Type
- Peer-Reviewed Article (27) (remove)
Language
- English (27) (remove)
Division
- Kreislaufwirtschaft (27) (remove)
A policy mix for resource efficiency in the EU : key instruments, challenges and research needs
(2019)
Against the background of an often wasteful use of natural resources, the European Union has made resource efficiency a top policy priority. Policy formulation is, however, at a very early stage in many Member States, with often vague notions of what resource efficiency means, characterised by fragmented instruments and overlapping competencies. This paper develops a conceptual framework for defining, assessing and developing resource efficiency policy mixes. It argues that a mix of policies and instruments is best suited to overcoming the complex challenges of the 21st Century. Such a mix addresses multiple resource domains at a strategic, high level and contains interacting instruments targeting multiple actors, levels of governance and sectors and life-cycle stages of resource use. This paper looks at criteria for effective resource efficiency policy instruments, presents both an indicative policy mix across 9 policy domains and case studies (on environmental harmful subsidies, supply chain efficiency in food systems and product-service systems) and identifies key challenges to overcome trade-offs in instrument design, maximise synergies, reduce conflicts, promote coherence, coordinate activities and move from theory to practice. Research needs are discussed regarding who shall devise, implement, and coordinate such a policy mix, considering negotiating power, timing and complexity.
Accelerating circular economy solutions to achieve the 2030 agenda for sustainable development goals
(2022)
Circular economy seems a vital enabler for sustainable use of natural resources which is also important for achieving the 2030 agenda for sustainable development goals. Therefore, a special session addressing issues of "sustainable solutions and remarkable practices in circular economy focusing materials downstream" was held at the 16th International Conference on Waste Management and Technology, where researchers and attendees worldwide were convened to share their experiences and visions. Presentations focusing on many key points such as new strategies, innovative technologies, management methods, and practical cases were discussed during the session. Accordingly, this article compiled all these distinctive presentations and gave insights into the pathway of circular economy towards the sustainable development goals. We summarized that the transition to circular economy can keep the value of resources and products at a high level and minimize waste production; the focus of governmental policies and plans with the involvement of public-private-partnership on 3Rs (reduce, reuse, and recycle) helps to improve the use of natural resources and take a step ahead to approach or achieve the sustainability.
In this paper three approaches on transitions pathways are combined to study the role of agricultural nature conservation in the Dutch land use domain for achieving internationally agreed climate and biodiversity targets. The three perspectives used are the Multilevel Perspective (MLP), Initiative Based Learning (IBL) and Integrated Assessment Modelling (IAM). The analysis provides insights in how the combination of different research approaches can lead to more comprehensive policy advice on how agricultural nature conservation could help to achieve internationally agreed sustainability goals related to climate change and biodiversity. IAM shows under which conditions agricultural nature conservation could be consistent with European and global long-term goals regarding food security, biodiversity and climate. MLP provides insight into the extent in which agricultural nature conservation has affected or changed the existing nature and agricultural regimes. IBL, finally, reveals the challenges of encouraging agricultural nature conservation with policy measures. Our analysis shows that a combined perspective provides a deeper understanding of the underlying processes, reasons and motives of agricultural nature conservation, leading to more comprehensive policy recommendations.
Artificial intelligence in the sorting of municipal waste as an enabler of the circular economy
(2021)
The recently finalized research project "ZRR for municipal waste" aimed at testing and evaluating the automation of municipal waste sorting plants by supplementing or replacing manual sorting, with sorting by a robot with artificial intelligence (ZRR). The objectives were to increase the current recycling rates and the purity of the recovered materials; to collect additional materials from the current rejected flows; and to improve the working conditions of the workers, who could then concentrate on, among other things, the maintenance of the robots. Based on the empirical results of the project, this paper presents the main results of the training and operation of the robotic sorting system based on artificial intelligence, which, to our knowledge, is the first attempt at an application for the separation of bulky municipal solid waste (MSW) and an installation in a full-scale waste treatment plant. The key questions for the research project included (a) the design of test protocols to assess the quality of the sorting process and (b) the evaluation of the performance quality in the first six months of the training of the underlying artificial intelligence and its database.
The growing demand for wood to meet EU renewable energy targets has increasingly come under scrutiny for potentially increasing EU import dependence and inducing land use change abroad, with associated impacts on the climate and biodiversity. This article builds on research accounting for levels of primary timber consumption - e.g., toward forest footprints - and developing reference values for benchmarking sustainability - e.g., toward land use targets - in order to improve systemic monitoring of timber and forest use. Specifically, it looks at future trends to assess how current EU policy may impact forests at an EU and global scale. Future demand scenarios are based on projections derived and adapted from the literature to depict developments under different scenario assumptions. Results reveal that by 2030, EU consumption levels on a per capita basis are estimated to be increasingly disproportionate compared to the rest of the world. EU consumption scenarios based on meeting around a 40% share of the EU renewable energy targets with timber would overshoot both the EU and global reference value range for sustainable supply capacities in 2030. Overall, findings support literature pointing to an increased risk of problem shifting relating to both how much and where timber needed for meeting renewable energy targets is sourced. It is argued that a sustainable level of timber consumption should be characterized by balance between supply (what the forest can provide on a sustainable basis) and demand (how much is used on a per capita basis, considering the concept of fair shares). To this end, future research should close data gaps, increase methodological robustness and address the socio-political legitimacy of the safe operating space concept towards targets in the future. A re-use of timber within the economy should be supported to increase supply options.
The rising popularity and strong increase in the number of electric bicycles make it necessary to consider the built-in resources as well as possible treatments after the use phase. The time lag between the purchase and the occurrence of relevant defects suggests significant increases in defective components. Especially the great dynamics of the market due to regular innovations, product renewals, and the lack of spare parts availability for older models make the long-term use by customers much more difficult than for conventional bicycles. Therefore, it is necessary to analyze circular business models for the electric bicycle market. In this way, the required structures for a sustainable electric bicycle industry can be created so that valuable materials do not go into disposal but undergo a new use phase. Based on the results of "AddRE-Mo-Value Preservation Scenarios for Urban Electromobility of Persons and Loads through Additive Manufacturing and Remanufacturing," a research project funded by the German Federal Ministry of Education and Research, this paper addresses four circular business models, two sales models, and two service models. The guiding research interest of this paper is the combination of remanufacturing and additive manufacturing from a business model perspective, analyzing the extent to which additive remanufacturing can be considered a solution for electric bicycles' circularity. After describing the approach and methods used to develop these four circular business models the business models are described and analyzed using the Business Model Canvas. Based on this analysis, it is shown that the combination of remanufacturing and additive manufacturing can be applied to the electric bicycle market and be integrated into both sales and service models. The description of these business models will help managers design viable business models in the context of sustainable electric bicycles. It also shows that the individual partners within the value chain must collaborate more closely. In the electric bicycle industry, a single company will probably not be able to close the product cycle completely. Further research is needed to develop concepts of the business models and examine their practical feasibility in technical and organizational operations to achieve a circular economy.
The construction sector is the second largest area for the application for plastics. Due to the long life times of construction products, the implementation of the circular economy faces its own challenges. To investigate this challenge, the study covers a market study for Germany, voluntary take-back and recycling schemes of construction products, as well as the use of plastic recyclates in construction products. In addition, plastic packaging of construction products is covered. Opportunities and barriers to the use of recycled plastics in construction products are derived from the intersection of available technologies, recyclate supply, and technical requirements for construction products. The report concludes with recommendations to various stakeholders on how to promote the use of recyclates in construction products and their packaging. Important points here are the introduction of a recyclate quota for films as construction product packaging and the description of recycling possibilities and recyclate content in the technical documentation of construction products.
Businesses like Airbnb have shown that a successful circular economy (CE) business can operate exclusively online. Although online communication and web appearance attributes have been subject to academic research given accelerated digitization, there is still a lack of knowledge about online attributes and their role in facilitating CE. We close the portrayed knowledge gap by conducting a discrete-choice experiment with best to worst scaling and focusing on the effect of CE experience on the perception of a CE website by ranking nine online attributes, grouped in three subsets. We therefore contribute by identifying online attributes that are perceived as favorable for CE businesses and detect how participation in CE activities affects the perception of these attributes. We find that third-party associated online attributes (e.g., user reviews or third-party guarantees) rank significantly higher throughout CE consumption patterns of the sample, being always amongst the top three attributes. This novel finding on online preferences opens a new direction for further research, as well as allows practitioners to optimize online operations accordingly. Furthermore, we find that users without prior touchpoints with CE have a higher need for information about the business model as compared to CE active users who are more interested in community related attributes.
Digital platforms may yield a host of advantages in putting circular economy into effect. This paper analyses the related chances and discusses requirements of digital platforms for the realization of a circular economy. It specifically points to potential solutions offered by digital platforms for existing barriers. From there it identifies issues that need specific attendance to create economically and ecologically functional platforms. Three economically relevant perspectives are discussed for this: a management perspective, a legislative perspective and a social/systems perspective.
Electronics containing growing quantities of high value and critical metals are increasingly used in automobiles. The conventional treatment practice for end-of-life vehicles (ELV) is shredding after de-pollution and partial separation of spare parts. Despite opportunities for resource recovery, the selective separation of components containing relevant amounts of critical metals for the purpose of material recycling is not commonly implemented. This article is aimed to contribute to recycling strategies for future critical metal quantities and the role of extended material recovery from ELVs. The study examines the economic feasibility of dismantling electronic components from ELVs for high value metal recycling. The results illustrate the effects of factors as dismantling time, labour costs and logistics on the economic potential of resource recovery from ELVs. Manual dismantling is profitable for only a few components at the higher labour costs in western/northern parts of Europe and applicable material prices, including the inverter for hybrid vehicles, oxygen sensor, side assistant sensor, distance and near distance sensors. Depending on the vehicle model, labour costs and current material prices, manual dismantling can also be cost-efficient for also some other such as the heating blower, generator, starter, engine and transmission control, start/stop motor, drive control, infotainment and chassis control.