This article presents the findings of a European study on energy efficiency in the public sector, entitled "Public procurement of Energy Saving Technologies in Europe" (PROST), completed in 2003. Energy efficiency in the public sector goes far beyond energy savings and climate protection. Energy efficiency must be seen as a strategy, which deals both with scarce public funds and with profound energy and climate challenges. The gains to be made are substantial. The study assessed the potential for energy and cost savings and the greenhouse gas reductions that are linked to energy efficiency in the European public sector. To the knowledge of the authors, this is the first time such an analysis has been carried out. The study concluded that there are no fundamental legal obstacles that would a priori disable the public sector from procuring energy efficient technologies or applying energy efficiency considerations in its daily building management routines. However, at the level of implementation obstacles can occur. It is therefore of paramount importance that there is sufficient political will and adequate incentive systems at all relevant levels. It appeared to be particularly effective when public procurement is energy-efficiency minded in all its operations and life cycle costing is applied for investments instead of conventional public budgeting procedures. The study demonstrates that consistent and EU-wide application of these principles and instruments can result in rather substantial savings both in terms of energy and in terms of money. With additional annual investments in energy efficiency of 80 million Euro, energy savings in the (EU15) Member States' public sector worth up to 12 billion Euro per year can be achieved. A supplementary analysis was performed for a selection of the new Member States, which indicated that the potential for energy and fiscal savings is substantial in those countries as well.
The Energy End-use Efficiency and Energy Services Directive (ESD) of the European Union requires the member states to define and attain an overall target of at least 9 % annual energy savings between 2008 and 2016. Even if this target is indicative, this is the first international framework mandating countries to report on their energy savings results and prove achievement of their targets. The directive thus also required the development of harmonised calculation methods that can be used by member states for this proof and reporting. Existing literature covers most of the usual issues related to energy savings evaluation, but mostly looking at single, given energy efficiency programmes or policies. The evaluation objective for the ESD implementation is different, as it aims at accounting for the whole energy savings achieved in a country. Moreover, one of the main difficulties is the diversity in history and experience on this topic among the member states. In this context, the European project EMEEES has worked out an integrated system of bottom-up and top-down methods for the measurement of energy savings. The paper presents the overview of its final results. The proposals, inter alia, include 20 bottom-up and 14 top-down case applications of general evaluation methods. They enable more than 90 % of the potential energy savings to be measured and reported. They were used as a starting point by the European Commission to develop the methods recently recommended to the member states. Furthermore, the paper briefly discusses the importance of the quantity to be measured-all or additional energy savings - and the effect of measures implemented before the entering into force of the ESD ("early action"), and what this meant for the methods to be developed. It compares the main elements of calculation needed to ensure consistent results between bottom-up and top-down methods at the overall national level. Finally, general conclusions are drawn about what could be the next steps in developing an evaluation system that enables a high degree of comparability of results between different countries.
This paper presents the evaluation of a regional energy efficiency programme implemented in two "départements" of France. Électricité de France (EDF), a French energy company, provides refurbishment advice and financial incentives to end-users in the residential sector as well as specific training courses and certification to local installation contractors and building firms. Refurbishment measures analysed in this paper are efficient space heating equipment (condensing boilers, heat pumps and wood stoves or boilers), solar water heating systems and the installation of double-glazed windows. A billing analysis based on a survey of programme participants' energy consumption is used to calculate the energy savings attributed to the programme. In order to receive an economic feedback of this demonstration programme, the evaluation of both saved energy and programme costs is of importance. Detailed knowledge of the programme's cost-effectiveness is essential for EDF to achieve the saving obligations imposed by the French White Certificate scheme at the lowest cost. Results of this evaluation can support the development and implementation of further energy efficiency programmes with similar characteristics in other regions of France. The cost-effectiveness is determined from the perspective of the programme participant and the society as well as the energy company in charge of the programme. All cost and benefit components are calculated in Euro per kilowatt-hour, which allows a direct comparison of levelized costs of conserved energy with the avoidable costs of the energy supply system.
Mit Steigerungen der Energie- und Ressourceneffizienz sind gelegentlich sog. Rebound-Effekte verbunden. Die durch die Effizienzsteigerung eingesparten Kosten führen dann durch verstärkte Nutzung oder zusätzlichen Konsum und damit verbundener Produktion zu weiterem Energie- und Ressourcenverbrauch. Obwohl oft und gerne vergessen wird, dass Rebound-Effekte durchaus auch Indikatoren positiver Entwicklungen sind, reduzieren sie unstrittig erzielte Effizienzgewinne. Aber welchen Umfang haben diese Effekte überhaupt? Und gibt es Möglichkeiten, ihren Einfluss zu schmälern?
Reliably reducing the emissions in the building sector plays a crucial role if the 1.5°C climate target from the Paris Agreement is to be met. The observed trends show a significant increase in building energy use, especially in emerging economies. Counteracting these trends is absolutely essential, especially in the light of urbanisation, population growth and changing lifestyles. In terms of mitigating the climate impact of buildings, ensuring high levels of efficiency (i.e. very low energy needs, especially for heating and cooling) has the greatest potential for saving energy and emissions, and is at the same time the prerequisite for effective use of energy from renewable sources. Clearly defined targets and suitable metrics are essential to enable appropriate design decisions. Implemented projects clearly indicate that quality assured design and construction lead to reliable in-use energy performance. Effective policy packages to address opportunities and challenges are important drivers to support the uptake of state-of-the-art efficiency measures in the urban building sector.
Energy sufficiency has recently gained increasing attention as a way to limit and reduce total energy consumption of households and overall. This paper presents both the partly new methods and the results of a comprehensive analysis of a micro- and meso-level energy sufficiency policy package to make electricity use in the home more sufficient and reduce at least the growth in per-capita dwelling size. The objective is to find out how policy can support households and their members, as individuals or as caregivers, but also manufacturers and local authorities in practicing energy sufficiency. This analysis needed an adapted and partly new set of methods we developed. Energy sufficiency does not only face barriers like energy efficiency, but also potential restrictions for certain household members or characteristics, and sometimes, preconditions have to be met to make more energy-sufficient routines and practices possible. All of this was analysed in detail to derive recommendations for which policy instruments need to be combined to an effective policy package for energy sufficiency. Energy efficiency and energy sufficiency should not be seen as opposed to each other but work in the same direction - saving energy. Therefore, some energy sufficiency policy instruments may be the same as for energy efficiency, such as energy pricing policies. Some may simply adapt technology-specific energy efficiency policy instruments. Examples include progressive appliance efficiency standards, standards based on absolute consumption, or providing energy advice. However, sufficiency may also require new policy approaches. They may range from promotion of completely different services for food and clothes cleaning, to instruments for limiting average dwelling floor area per person, or to a cap-and-trade system for the total electricity sales of a supplier to its customers, instead of an energy efficiency obligation.
India's present development trajectory is at a crucial juncture with a requirement to meet the demands of a population of over 1.2 billion while ensuring environmental sustainability. The resulting economic growth over the past two decades has over-exploited finite natural resources and led to tremendous environmental degradation. Therefore, decoupling economic growth from resource consumption is crucial in the transformation towards a green economy. Building construction is one of the most resource-intensive sectors, as well as creating a high impact on the environment. This study analyzes existing mechanisms in India's building construction sector that attempt to decouple economic growth from resource use and environmental impacts. The key contributors for decoupling are analyzed. Recommendations for regulations, market incentives, transparency, data monitoring and capacity-building are provided for an array of policy initiatives targeted at political and financial decision-makers at the national, state and local levels for different buildings.
Energiesuffizienz ist neben Energieeffizienz ein zweiter Weg, den Energieverbrauch zu reduzieren. Während Energieeffizienz bei unverändertem Nutzen den Energieinput senkt, ist Energiesuffizienz eine Strategie mit dem Ziel, die Menge an technisch bereitgestellter Energie durch Veränderungen der Quantität oder Qualität des Nutzens aus Energie auf ein nachhaltiges Maß zu begrenzen oder zu reduzieren. Das kann durch Reduktion, Substitution oder Anpassung des Nutzens an den Bedarf im Alltag geschehen. Viele Haushalte praktizieren schon Energiesuffizienz, aber die Hemmnisse für eine stärkere Nutzung sind groß. Auch die Energiesuffizienz im Haushalt benötigt daher eine Flankierung durch die Politik. Im BMBF-Projekt "Energiesuffizienz" wurde daher erstmals eine integrierte Energiesuffizienzpolitik untersucht, die insbesondere den Stromverbrauch in den privaten Haushalten adressiert.