Refine
Document Type
- Peer-Reviewed Article (22) (remove)
The optimization of value chains is an important process to promote sustainable development, since value chains are closely linked to the satisfaction of human needs and combine different driving forces for environmental change. This article presents a methodological approach for the participatory development of value-chain wide sustainability indicator sets and their integration into a decision support tool in the specific case study of the chain "construction and refurbishment with wood". There are numerous indicator sets for sustainable development of forests and sustainable forestry available at different levels, ranging from local, regional and national to global scale assessments. Some efforts were also made to integrate later production stages of forest value chains (such as wood processing) in the assessment scope (e.g. for chain-of-custody certification). However, no indicator set has so far been available covering environmental, social and economic aspects for the entire value chain of building with timber. This gap was closed through applied sustainability research in the project "Holzwende 2020: Sustainable future markets for wood in the building sector".
Die Umweltauswirkungen von Teil-, Miet- oder Tauschangeboten aus dem Bereich der Sharing Economy werden zumeist aus einer Nachhaltigkeitsperspektive betrachtet und dementsprechend mit einer Verminderung des Ressourcenverbrauchs sowie einer gesteigerten Ressourceneffizienz verbunden. Handelt es sich bei Sharing Economy tatsächlich um eine ressourcenschonende, energieeffiziente und für den "Massenmarkt" geeignete Konsumalternative oder haben wir es vielmehr mit einer kurzzeitigen Nischeninnovation einzelner Lifestyle-Communities zu tun?
The food and agricultural sector will face numerous challenges in the next decades, arising from changing global production and consumption patterns, which currently go along with high resource use, causing ecological and socio-economic impacts. The aim of this paper is to illustrate and evaluate the practical applicability of the Hot Spot Analysis methodology in the context of supply chain management in companies. The HSA is a method to identify social and ecological problems along the entire life cycle of a product. Special emphasis is put on a customized implementation in the value chain beef of McDonald's Germany. The HSA of McDonald's beef value chain shows that the main ecological problems arise in the phase of raw material extraction, whereas the main social problems can be identified in the phase of slaughtering. Finally, the paper shows potentials and shortcomings of such a customized application and how the results can be implemented in the sustainability management of a company.
Despite rising prices for natural resources during the past 30 years, global consumption of natural resources is still growing. This leads to ecological, economical and social problems. So far, however, limited effort has been made to decrease the natural resource use of goods and services. While resource efficiency is already on the political agenda (EU and national resource strategies), there are still substantial knowledge gaps on the effectiveness of resource efficiency improvement strategies in different fields. In this context and within the project "Material Efficiency and Resource Conservation", the natural resource use of 22 technologies, products and strategies was calculated and their resource efficiency potential analysed. In a preliminary literature- and expert-based identification process, over 250 technologies, strategies, and products, which are regarded as resource efficient, were identified. Out of these, 22 subjects with high resource efficiency potential were selected. They cover a wide range of relevant technologies, products and strategies, such as energy supply and storage, Green IT, transportation, foodstuffs, agricultural engineering, design strategies, lightweight construction, as well as the concept "Using Instead of Owning". To assess the life-cycle-wide resource use of the selected subjects, the material footprint has been applied as a reliable indicator. In addition, sustainability criteria on a qualitative basis were considered. The results presented in this paper show significant resource efficiency potential for many technologies, products and strategies.
Nutrition is responsible for about 30% of global natural resource use. In order to limit the negative impact the nutritional sector has on the environment and on society, the consumption and processing of foodstuffs with assumed low negative impact is an important topic in the effort of sustainable development. In professional kitchens, clearly defined indicators assessing the impact of business activities are needed in this effort. The research and development in the NAHGAST project provides groundwork that could be of important assistance in this effort. Two versions of an assessment tool, with indicators of different complexity (NAHGAST Meal-Basic and NAHGAST Meal-Pro), were developed that can be used by kitchen professionals to determine the sustainability performance of their products - the offered meal. An informed selection of indicators, and a discussion of what processes and impacts this indicator relates to in the wider context, are essential and are discussed in this paper. Furthermore, in the selection of indicators for the purpose of our research certain criteria were considered simultaneously: (1) Communicability - What information an indicator can communicate and how comprehensible this information is for different actors; (2) Feasibility and data availability - Whether there is sufficient data for an indicator to be included and whether it is realistic for companies to integrate this indicator in their daily work practice; and (3) Scientific relevance - Whether the indicator is relevant for sustainability efforts on a larger scale and for related discussions in the scientific community. Insights related to these considerations are valuable for future developments in sustainability assessment in out-of-home gastronomy. The tool has been used to evaluate a number of dishes and results are deemed meaningful. However, assessments must not be understood as an accurate measurement but as an approximation of the sustainability of meals. At the level of individual indicators, they allow a detailed analysis and targeted optimization of recipes, while the aggregated results in the form of labels can be communicated well to customers. However, deficiencies and challenges, as discovered in the application phase of the project, demonstrate research gaps in the wider context. Finally, further steps for an integration of the tool in company processes and remaining options for companies to adjust the tool are discussed.
Combined heat and power (CHP) production in buildings is one of the mitigation options available for achieving a considerable decrease in GHG emissions. Micro-CHP (mCHP) fuel cells are capable of cogenerating electricity and heat very efficiently on a decentralised basis. Although they offer clear environmental benefits and have the potential to create a systemic change in energy provision, the diffusion of mCHP fuel cells is rather slow. There are numerous potential drivers for the successful diffusion of fuel cell cogeneration units, but key economic actors are often unaware of them. This paper presents the results of a comprehensive analysis of barriers, drivers and business opportunities surrounding micro-CHP fuel-cell units (up to 5 kWel) in the German building market. Business opportunities have been identified based not only on quantitative data for drivers and barriers, but also on discussions with relevant stakeholders such as housing associations, which are key institutional demand-side actors. These business opportunities include fuel cell contracting as well as the development of a large lighthouse project to demonstrate the climate-neutral, efficient use of fuel cells in the residential building sector. The next step could involve the examination and development of more detailed options and business models. The approach and methods used in the survey may be applied on a larger scale and in other sectors.
We present the results of a regression analysis of a large-scale integrated user online application that surveys natural resource use and subjective well-being in Germany. We analyse more than 44,000 users who provided information on their natural resource consumption (material footprint) as well as their personal socio-economic and socio-psychological characteristics. We determine an average material footprint of 26 tonnes per person per year. In addition, we endeavour to determine how much environment humans need by regressing natural resource use as well as relevant socio-economic and socio-psychological features on subjective well-being. We establish a slightly negative correlation between subjective well-being and material footprints. A higher material footprint is associated with lower subjective well-being. We conclude that consumer policies seeking to promote sustainable behaviour should highlight the fact that a lower material footprint may result in greater subjective well-being.
The concept Material Input per Service Unit (MIPS) was developed 20 years ago as a measure for the overall natural resource use of products and services. The material intensity analysis is used to calculate the material footprint of any economic activities in production and consumption. Environmental assessment has developed extensive databases for life cycle inventories, which can additionally be adopted for material intensity analysis. Based on practical experience in measuring material footprints on the micro level, this paper presents the current state of research and methodology development: it shows the international discussions on the importance of accounting methodologies to measure progress in resource efficiency. The MIPS approach is presented and its micro level application for assessing value chains, supporting business management, and operationalizing sustainability strategies is discussed. Linkages to output-oriented Life Cycle Assessment as well as to Material Flow Analysis (MFA) at the macro level are pointed out. Finally we come to the conclusion that the MIPS approach provides relevant knowledge on resource and energy input at the micro level for fact-based decision-making in science, policy, business, and consumption.
Measure or management? : Resource use indicators for policymakers based on microdata by households
(2018)
Sustainable Development Goal 12 (SDG 12) requires sustainable production and consumption. One indicator named in the SDG for resource use is the (national) material footprint. A method and disaggregated data basis that differentiates the material footprint for production and consumption according to, e.g., sectors, fields of consumption as well as socioeconomic criteria does not yet exist. We present two methods and its results for analyzing resource the consumption of private households based on microdata: (1) an indicator based on representative expenditure data in Germany and (2) an indicator based on survey data from a web tool. By these means, we aim to contribute to monitoring the Sustainable Development Goals, especially the sustainable management and efficient use of natural resources. Indicators based on microdata ensure that indicators can be disaggregated by socioeconomic characteristics like age, sex, income, or geographic location. Results from both methods show a right-skewed distribution of the Material Footprint in Germany and, for instance, an increasing Material Footprint with increasing household income. The methods enable researchers and policymakers to evaluate trends in resource use and to differentiate between lifestyles and along socioeconomic characteristics. This, in turn, would allow us to tailor sustainable consumption policies to household needs and restrictions.
The demand for metals from the entire periodic table is currently increasing due to the ongoing digitalization. However, their use within electrical and electronic equipment (EEE) poses problems as they cannot be recovered sufficiently in the end-of-life (EoL) phase. In this paper, we address the unleashed dissipation of metals caused by the design of EEE for which no globally established recycling technology exists. We describe the European Union's (EU) plan to strive for a circular economy (CE) as a political response to tackle this challenge. However, there is a lack of feedback from a design perspective. It is still unknown what the implications for products would be if politics were to take the path of a CE at the level of metals. To provide clarification in this respect, a case study for indium is presented and linked to its corresponding recycling-metallurgy of zinc and lead. As a result, a first material-specific rule on the design of so-called "anti-dissipative" products is derived, which actually supports designing EEE with recycling in mind and represents an already achieved CE on the material level. In addition, the design of electrotechnical standardization is being introduced. As a promising tool, it addresses the multi-dimensional problems of recovering metals from urban ores and assists in the challenge of enhancing recycling rates. Extending the focus to other recycling-metallurgy besides zinc and lead in further research would enable the scope for material-specific rules to be widened.