For the option of “carbon capture and storage”, an integrated assessment in the form of a life cycle analysis and a cost assessment combined with a systematic comparison with renewable energies regarding future conditions in the power plant market for the situation in Germany is done. The calculations along the whole process chain show that CCS technologies emit per kWh more than generally assumed in clean-coal concepts (total CO2 reduction by 72-90% and total greenhouse gas reduction by 65-79%) and considerable more if compared with renewable electricity. Nevertheless, CCS could lead to a significant absolute reduction of GHG-emissions within the electricity supply system. Furthermore, depending on the growth rates and the market development, renewables could develop faster and could be in the long term cheaper than CCS based plants. Especially, in Germany, CCS as a climate protection option is phasing a specific problem as a huge amount of fossil power plant has to be substituted in the next 15 years where CCS technologies might be not yet available. For a considerable contribution of CCS to climate protection, the energy structure in Germany requires the integration of capture ready plants into the current renewal programs. If CCS retrofit technologies could be applied at least from 2020, this would strongly decrease the expected CO2 emissions and would give a chance to reach the climate protection goal of minus 80% including the renewed fossil-fired power plants.
It is now widely recognized that effective communication and demand-side policies for alternative energy require sound knowledge of preferences and determinants of demand of the public and consumers. To date, public attitudes towards new transport technologies have been studied under very different conceptual frameworks. This paper gives an overview of the various conceptual frameworks and methodologies used, where four main approaches can be distinguished: general attitudinal surveys, risk perception studies, non-market economic valuation studies, and other approaches such as those based on semiotic theory. We then review the findings of the recent literature on acceptance, attitudes and preferences for hydrogen and fuelcell end-use technologies, focusing on vehicles. These studies are then contrasted with related research into alternative fuel vehicles. The paper finally discusses the main trends in research and avenues for further work in this field. We recommend, among other things, the use of approaches that build knowledge and familiarity with the technology prior to the exploration of attitudes, and the set up of studies that take a whole-systems perspective of hydrogen technologies and that look at hydrogen in the context of other competing clean technologies.
This study provides insight into the feasibility of a CO2 trunkline from the Netherlands to the Utsira formation in the Norwegian part of the North Sea, which is a large geological storage reservoir for CO2. The feasibility is investigated in competition with CO2 storage in onshore and near-offshore sinks in the Netherlands. Least-cost modelling with a MARKAL model in combination with ArcGIS was used to assess the cost-effectiveness of the trunkline as part of aDutch greenhouse gas emission reduction strategy for the Dutch electricity sector and CO2 intensive industry. The results show that under the condition that a CO2 permit price increases from €25 per tCO2 in 2010 to €60 per tCO2 in 2030, and remains at this level up to 2050, CO2 emissions in the Netherlands could reduce with 67% in 2050 compared to 1990, and investment in the Utsira trunkline may be cost-effective from 2020–2030 provided that Belgian and German CO2 is transported and stored via the Netherlands as well. In this case, by 2050 more than 2.1 GtCO2 would have been transported from the Netherlands to the Utsira formation. However, if the Utsira trunkline is not used for transportation of CO2 from Belgium and Germany, it may become cost-effective 10 years later, and less than 1.3 GtCO2 from the Netherlands would have been stored in the Utsiraformation by 2050. On the short term, CO2 storage in Dutch fields appears more cost-effective than in the Utsira formation, but as yet there are major uncertainties related to the timing and effective exploitation of the Dutch offshore storage opportunities.
Several energy scenario studies consider concentrated solar power (CSP) plants as an important technology option to reduce the world's CO2 emissions to a level required for not letting the global average temperature exceed a threshold of 2–2.4 °C. A global ramp up of CSP technologies offers great economic opportunities for technology providers as CSP technologies include highly specialised components. This paper analyses possible value creation effects resulting from a global deployment of CSP until 2050 as projected in scenarios of the International Energy Agency (IEA) and Greenpeace International. The analysis focuses on the economic opportunities of German technology providers since companies such as Schott Solar, Flabeg or Solar Millennium are among the leading suppliers of CSP technologies on the global market.
Concentrated solar power (CSP) plants are one of several renewable energy technologies with significant potential to meet a part of future energy demand. An integrated technology assessment shows that CSP plants could play a promising role in Africa and Europe, helping to reach ambitious climate protection goals. Based on the analysis of driving forces and barriers, at first three future envisaged technology scenarios are developed. Depending on the underlying assumptions, an installed capacity of 120 GWel, 405 GWel or even 1,000 GWel could be reached globally in 2050. In the latter case, CSP would then meet 13–15% of global electricity demand. Depending on these scenarios, cost reduction curves for North Africa and Europe are derived. The cost assessment conducted for two virtual sites in Algeria and in Spain shows a long-term reduction of electricity generating costs to figures between 4 and 6 ct/kWhel in 2050. The paper concludes with an ecological analysis based on life cycle assessment. Although the greenhouse gas emissions of current (solar only operated) CSP systems show a good performance (31 g CO2-equivalents/kWhel) compared with advanced fossil-fired systems (130–900 CO2-eq./kWhel), they could further be reduced to 18 g CO2-eq./kWhel in 2050, including transmission from North Africa to Europe.
For parabolic trough power plants using synthetic oil as the heat transfer medium, the application of solid media sensible heat storage is an attractive option in terms of investment and maintenance costs. One important aspect in storage development is the storage integration into the power plant. A modular operation concept for thermal storage systems was previously suggested by DLR, showing an increase in storage capacity of more than 100 %. However, in these investigations, the additional costs needed to implement this storage concept into the power plant, like for extra piping, valves, pumps and control had not been considered. These aspects are discussed in this paper, showing a decrease of levelized energy costs with modular storage integration of 2 to 3 %. In a Life Cycle Assessment (LCA) a comparison of an AndaSol-I type solar thermal power plant [1] with the original two-tank molten salt storage and with a "hypothetical" concrete storage shows an advantage of the concrete storage technology concerning environmental impacts. The environmental impacts of the “hypothetical” concrete based AndaSol-I decrease by 7 %, considering 1 kWh of solar electricity delivered to the grid. Regarding only the production of the power plant, the emissions decrease by 9.5 %.
The study presents the results of an integrated assessment of carbon capture and storage (CCS) in the power plant sector in Germany, with special emphasis on the competition with renewable energy technologies. Assessment dimensions comprise technical, economic and environmental aspects, long-term scenario analysis, the role of stakeholders and public acceptance and regulatory issues. The results lead to the overall conclusion that there might not necessarily be a need to focus additionally on CCS in the power plant sector. Even in case of ambitious climate protection targets, current energy policy priorities (expansion of renewable energies and combined heat and power plants as well as enhanced energy productivity) result in a limited demand for CCS. In case that the large energy saving potential aimed for can only partly be implemented, the rising gap in CO2 reduction could only be closed by setting up a CCS-maximum strategy. In this case, up to 22% (41 GW) of the totally installed load in 2050 could be based on CCS. Assuming a more realistic scenario variant applying CCS to only 20 GW or lower would not be sufficient to reach the envisaged climate targets in the electricity sector. Furthermore, the growing public opposition against CO2 storage projects appears as a key barrier, supplemented by major uncertainties concerning the estimation of storage potentials, the long-term cost development as well as the environmental burdens which abound when applying a life-cycle approach. However, recently, alternative applications are being increasingly considered–that is the capture of CO2 at industrial point sources and biomass based energy production (electricity, heat and fuels) where assessment studies for exploring the potentials, limits and requirements for commercial use are missing so far. Globally, CCS at power plants might be an important climate protection technology: coal-consuming countries such as China and India are increasingly moving centre stage into the debate. Here, similar investigations on the development and the integration of both, CCS and renewable energies, into the individual energy system structures of such countries would be reasonable.
If the current energy policy priorities are retained, there may be no need to focus additionally on carbon capture and storage (CCS) in the power plant sector of Germany. This applies even in the case of ambitious climate protection targets, according to the results of the presented integrated assessment study. These cover a variety of aspects: Firstly, the technology is not expected to become available on a large scale in Germany before 2025. Secondly, if renewable energies and combined heat and power are expanded further and energy productivity is enhanced, there is likely to be only a limited demand for CCS power plants, as a scenario analysis of CCS deployment in Germany shows. Thirdly, cost analysis using the learning curve approach shows that the electricity generation costs of renewable electricity approach those of CCS power plants. This leads to the consequence that, from 2020, several renewable technologies may well be in a position to offer electricity at a cheaper rate than CCS power plants. In addition, a review of new life cycle assessments for CO2 separation in the power plant sector indicates that the greenhouse gas emissions from 1 kW h of electricity generated by first-generation CCS power plants could only be reduced by 68 % to 87 % (95 % in individual cases). Finally, a cautious, conservative estimate of the effective German CO2 storage capacity of approximately 5 billion tonnes of CO2 is calculated, including a fluctuation range yielding values between 4 and 15 billion tonnes of CO2. Therefore, the total CO2 emissions caused by large point sources in Germany could be stored for 12 years (basic value) or for 8 or 33 years (sensitivity values).
Eine oft kontrovers diskutierte Frage ist, ob eine massive Dämmung von Häusern in der Gesamtbilanz nicht mehr Ressourcenverbrauch und Emissionen verursacht, als sie im Endeffekt einspart. Zur Untersuchung dieser Frage wurde nun erstmals eine trade-off Analyse durchgeführt. Hierzu wurde ein bottom-up Wirkungsanalyse-Modell entwickelt, dessen Kern ein Emissions- und Energiemodell für den Haushaltssektor bildet, gekoppelt mit einem Ökobilanzierungs-Tool. Den Rahmen für beide Modelle bilden Energieszenarien bis 2050, die für jede Dekade Sanierungsraten und Energiemixe vorgeben. Damit können "reine" Energieszenarien um ressourcenpolitische Analysen erweitert und die Auswirkungen verschiedener Dämmstrategien ermittelt werden.
Das zentrale Ergebnis der Modellierung ist, dass zusätzliche Aufwendungen für Dämmstoffe (untersucht wurden extrudierter Polystyrolhartschaum XPS und Zellulose) sowohl ressourcen- als auch emissionsseitig in fast allen Umweltwirkungskategorien durch erhebliche Einsparungen bei der Gebäudebeheizung überkompensiert werden. Im Wesentlichen sind keine Trade-offs erkennbar und der prozentuale Beitrag der Dämmstoffe an den Umweltwirkungsindikatoren ist gering. Relevant ist dagegen die Wahl des Treibmittels bei den aufgeschäumten XPS-Dämmstoffen: Gegenüber dem in Deutschland verwendeten XPS, das weitgehend mit CO2 aufgeschäumt wird, führt ein Dämmstoff, der hohe Anteile an Fluorkohlenwasserstoffen aufweist, zu einem hohen Trade-off bezüglich der Wirkungskategorie "stratosphärischer Ozonabbau" und zu einer erkennbaren, jedoch nicht so deutlichen Wirkung auf das Treibhaus-Potenzial. Eine Sensitivitätsanalyse mit dem alternativen Dämmmaterial Zellulose zeigt, dass sich die an sich schon geringen Anteile der Dämmstoffe an den Umweltwirkungsindikatoren weiter verringern. Hinsichtlich der Materialintensität sind XPS- und Zellulose-Dämmung jedoch mit vergleichbaren Auswirkungen verbunden.
Zusammenfassend lässt sich festhalten, dass für beide Materialien ambitionierte Dämmstoffstrategien im Hinblick auf alle in dieser Studie analysierten Faktoren einen wesentlichen Beitrag sowohl zu Materialeffizienz- als auch zu Emissionsminderungszielen leisten können.
Um das vom Weltklimarat (IPCC) geforderte 2°C-Ziel einhalten zu können, ist eine Reduktion der globalen CO2-Emissionen um 80% bis 2050 gegenüber dem Stand von 1990 zwingend notwendig. Hierbei wird auch solarthermischen Kraftwerken eine immer größere Bedeutung beigemessen. Im BLUE Map-Szenario der Internationalen Energieagentur (IEA), das von einer CO2-Reduktion um 50% bis 2050 gegenüber 2005 ausgeht, müssen im Jahr 2050 ca. 11% (4.754 TWh) des weltweiten Strombedarfs durch Sonnenenergie gedeckt werden (IEA 2008). Neben Photovoltaik sollen solarthermische Kraftwerke (Concentrated Solar Power, CSP) etwa 46% (ca. 2.200 TWh) der prognostizierten Menge an Solarstrom erzeugen. Im Energy[R]evolution Szenario von Greenpeace International und EREC (European Renewable Energy Council) aus dem Jahr 2008 werden rund 6.000 TWh an CSP-Strom im Jahr 2050 angenommen (bei einer installierten Leistung von 801 GW), während andere Studien bis zu 1.000 GW installierter Leistung in 2050 betrachten (Viebahn et al. 2010). Die DESERTEC-Initiative gibt ein Ziel von 5.000 GW installierter Leistung im Jahr 2050 vor.
Der Export von CSP-Technologien in die "Sunbelt"-Regionen bietet große Chancen für deutsche Anlagenbauer. So sind u.a. Schott Solar, die Ferrostaal Group mit ihrem Geschäftssegment "Solar Energy", Flagsol, die Solar Power Group, Solar Millenium und Fichtner Solar auf dem Gebiet CSP aktiv. Schott Solar (Receiver) und Flabeg (Spiegel) haben eine weltweit führende Markstellung inne. Große deutsche Energieversorger und Anlagenbauer wie E.On, RWE und Siemens gehören zum Industriekonsortium der Desertec Industrial Initiative, die den Ausbau von CSP in der MENA-Region vorantreiben will. Die Initiative wurde von der Münchener Rück angestoßen.
In diesem Artikel wird dargestellt, welche Aktivitäten deutsche Unternehmen entlang der Wertschöpfungskette bislang aufweisen und wie ihre Marktstellung im Vergleich zu führenden internationalen Unternehmen zu bewerten ist. Anschließend wird auf Basis von vorliegenden Energieszenarien ermittelt, welche messbaren ökonomischen Effekte für deutsche Unternehmen, z.B. zusätzliche Wertschöpfung und die Schaffung neuer Arbeitsplätze, aus den genannen Potentialen resultieren. Die Ergebnisse basieren auf einer Studie des Wuppertal Instituts, die im Auftrag von Greenpeace Deutschland und der DESERTEC Foundation erstellt wurde.