Refine
Document Type
- Report (10)
- Contribution to Periodical (3)
- Peer-Reviewed Article (1)
- Working Paper (1)
Division
- Kreislaufwirtschaft (15) (remove)
Mehr als sechs Millionen Tonnen Kunststoffabfälle fallen in Deutschland jährlich an, nur etwas weniger als die Hälfte kann werk- und rohstofflich genutzt werden, der Rest wird verbrannt. Gerade gemischte Kunststoffarten erschweren das Recycling. Hier bietet sich das chemische Recycling (Pyrolyse) an. Bei diesem Verfahren werden die Stoffe durch hohe Temperaturen zersetzt und in kleinere Moleküle aufgespalten. Diese lassen sich im Sinne der Kreislaufwirtschaft in neue Kunststoffe oder chemische Grundstoffe überführen. Die Schätzungen gehen von bis zu zwei Millionen Tonnen Kunststoffabfall jährlich aus, der auf diese Weise wiederverwendet werden könnte.
Das vorliegende Diskussionspapier zeigt, dass Pyrolyse von gemischten Kunststoffabfällen die chemische Industrie sowie die Abfallwirtschaft klimafreundlicher gestalten kann. Im Papier geht das Autorenteam auf die Potenziale und Entwicklungsperspektiven für Nordrhein-Westfalen ein mit dem Ziel, wissenschaftliche Grundlagen für Investitionsentscheidungen und Projektentwicklung im Sinne der Kreislaufwirtschaft zu schaffen.
Das Kreislaufwirtschaftsgesetz (KrWG) verlangt mit Bezug auf das Abfallvermeidungsprogramm (AVP) die Benennung zweckmäßiger Maßstäbe für Abfallvermeidungsmaßnahmen (AVM), anhand derer die Fortschritte bei der Entkopplung der mit der Abfallerzeugung verbundenen Auswirkungen auf Mensch und Umwelt vom Wirtschaftswachstum erfasst werden können. Das AVP benennt mögliche Indikatoren, allerdings ist unklar, inwieweit diese das Entstehen von Abfällen darstellen oder die Effekte von AVM abbilden können. Mögliche Bewertungsmaßstäbe für die Messung des Abfallvermeidungserfolges wurden analysiert, auf ihre Eignung geprüft und ein Set an Indikatoren erarbeitet, um eine kontinuierliche Messung des Erfolges von AVM zu ermöglichen.
The waste prevention program (WPP) from 2013 must be evaluated every 6 years and updated if necessary. The review and evaluation of the implementation of the WPP took place within the scope of the project. Based on the analysis results for the implementation of the WPP at federal, state and municipal level and an assessment of existing prevention potentials, concrete proposals for a possible further development and updating of the program on prioritized waste streams and corresponding priority prevention approaches were developed. In addition, structural adjustment and change needs of the WPP were worked out and further research was shown.
2013 wurde das Abfallvermeidungsprogramm des Bundes verabschiedet. Mit dem Programm sollten Abfallmengen reduziert werden. Das Programm wurde einer kritischen Bewertung unterzogen und wird nun im Jahr 2020 fortgeschrieben. Dafür wurden in einer UBA-Studie prioritäre Abfallströme und Konzepte erarbeitet und Maßnahmenvorschläge entwickelt, um die Abfallvermeidung zukünftig konkreter auszugestalten.
Electronics containing growing quantities of high value and critical metals are increasingly used in automobiles. The conventional treatment practice for end-of-life vehicles (ELV) is shredding after de-pollution and partial separation of spare parts. Despite opportunities for resource recovery, the selective separation of components containing relevant amounts of critical metals for the purpose of material recycling is not commonly implemented. This article is aimed to contribute to recycling strategies for future critical metal quantities and the role of extended material recovery from ELVs. The study examines the economic feasibility of dismantling electronic components from ELVs for high value metal recycling. The results illustrate the effects of factors as dismantling time, labour costs and logistics on the economic potential of resource recovery from ELVs. Manual dismantling is profitable for only a few components at the higher labour costs in western/northern parts of Europe and applicable material prices, including the inverter for hybrid vehicles, oxygen sensor, side assistant sensor, distance and near distance sensors. Depending on the vehicle model, labour costs and current material prices, manual dismantling can also be cost-efficient for also some other such as the heating blower, generator, starter, engine and transmission control, start/stop motor, drive control, infotainment and chassis control.
This report provides an overview of the main findings from the different research tasks in the CIRCTER project and delivers selected policy messages with European coverage. The report provides: (Sec. 2) a territorial definition of the circular economy; (Sec. 3) insights into the available statistics on material and waste patterns and flows and their interpretation, alongside new territorial evidence on both aspects; (Sec. 4) a sectoral characterisation of the circular economy at regional level (NUTS-2), including data on turnover and jobs; (Sec. 5) key findings from the CIRCTER case studies; (Sec. 6) a systemic interpretation of the circular economy that works as a knowledge-integration mechanism for the entire report; (Sec. 7 and 8) an analysis of the most relevant circular economy policies and strategies at various territorial levels; (Sec. 8) a subset of policy recommendations focusing in particular on territorial and cohesion policies, and; (Sec. 9) suggestions for further research.