Zukünftige Energie- und Industriesysteme
Refine
Year of Publication
- 2015 (9) (remove)
Document Type
- Peer-Reviewed Article (3)
- Report (3)
- Part of a Book (2)
- Contribution to Periodical (1)
Prospects of carbon capture and storage (CCS) in China's power sector : an integrated assessment
(2015)
Objective: The aim of the present article is to conduct an integrated assessment in order to explore whether CCS could be a viable technological option for significantly reducing future CO2 emissions in China. Methods: In this paper, an integrated approach covering five assessment dimensions is chosen. Each dimension is investigated using specific methods (graphical abstract). Results: The most crucial precondition that must be met is a reliable storage capacity assessment based on site-specific geological data. Our projection of different trends of coal-based power plant capacities up to 2050 ranges between 34 and 221 Gt of CO2 that may be captured from coal-fired power plants to be built by 2050. If very optimistic assumptions about the country’s CO2 storage potential are applied, 192 Gt of CO2 could theoretically be stored as a result of matching these sources with suitable sinks. If a cautious approach is taken, this figure falls to 29 Gt of CO2. In practice, this potential will decrease further with the impact of technical, legal, economic and social acceptance factors. Further constraints may be the delayed commercial availability of CCS in China; a significant barrier to achieving the economic viability of CCS due to a currently non-existing nation-wide CO2 pricing scheme that generates a sufficiently strong price signal; an expected life-cycle reduction rate of the power plant's greenhouse gas emissions of 59-60%; and an increase in most other negative environmental and social impacts. Conclusion and practice implications: Most experts expect a striking dominance of coal-fired power generation in the country's electricity sector, even if the recent trend towards a flattened deployment of coal capacity and reduced annual growth rates of coal-fired generation proves to be true in the future. In order to reduce fossil fuel-related CO2 emissions to a level that would be consistent with the long-term climate protection target of the international community to which China is increasingly committing itself, this option may require the introduction of CCS. However, a precondition for opting for CCS would be finding robust solutions to the constraints highlighted in this article. Furthermore, a comparison with other low-carbon technology options may be useful in drawing completely valid conclusions on the economic, ecological and social viability of CCS in a low-carbon policy environment. The assessment dimensions should be integrated into macro-economic optimisation models by combining qualitative with quantitative modelling, and the flexible operation of CCS power plants should be analysed in view of a possible role of CCS for balancing fluctuating renewable energies.
This article presents an integrated assessment conducted in order to explore whether carbon capture and storage (CCS) could be a viable technological option for significantly reducing future CO2 emissions in South Africa. The methodological approach covers a commercial availability analysis, an analysis of the long-term usable CO2 storage potential (based on storage capacity assessment, energy scenario analysis and source-sink matching), an economic and ecological assessment and a stakeholder analysis. The findings show, that a reliable storage capacity assessment is needed, since only rough figures concerning the effective capacity currently exist. Further constraints on the fast deployment of CCS may be the delayed commercial availability of CCS, significant barriers to increasing the economic viability of CCS, an expected net maximum reduction rate of the power plant's greenhouse gas emissions of 67%-72%, an increase in other environmental and social impacts, and low public awareness of CCS. One precondition for opting for CCS would be to find robust solutions to these constraints, taking into account that CCS could potentially conflict with other important policy objectives, such as affordable electricity rates to give the whole population access to electricity.
The German government has set itself the target of reducing the country's GHG emissions by between 80 and 95% by 2050 compared to 1990 levels. Alongside energy efficiency, renewable energy sources are set to play the main role in this transition. However, the large-scale deployment of renewable energies is expected to cause increased demand for critical mineral resources. The aim of this article is therefore to determine whether the transformation of the German energy system by 2050 ("Energiewende") may possibly be restricted by a lack of critical minerals, focusing primarily on the power sector (generating, transporting and storing electricity from renewable sources). For the relevant technologies, we create roadmaps describing a number of conceivable quantitative market developments in Germany. Estimating the current and future specific material demand of the options selected and projecting them along a range of long-term energy scenarios allows us to assess potential medium- or long-term mineral resource restrictions. The main conclusion we draw is that the shift towards an energy system based on renewable sources that is currently being pursued is principally compatible with the geological availability and supply of mineral resources. In fact, we identified certain sub-technologies as being critical with regard to potential supply risks, owing to dependencies on a small number of supplier countries and competing uses. These sub-technologies are certain wind power plants requiring neodymium and dysprosium, thin-film CIGS photovoltaic cells using indium and selenium, and large-scale redox flow batteries using vanadium. However, non-critical alternatives to these technologies do indeed exist. The likelihood of supplies being restricted can be decreased further by cooperating even more closely with companies in the supplier countries and their governments, and by establishing greater resource efficiency and recyclability as key elements of technology development.
This study conducted by Wuppertal Institute and Germanwatch explores how the social pillar of sustainability at the local level could be met in Concentrated Solar Power (CSP) projects. For this purpose, the authors evaluate the livelihood dimension of CSP technology based on a case study conducted on the 160 MW pilot CSP plant Nooro I in Ouarzazate, Morocco.
Der Ergebnisbericht dokumentiert in Kapitel 2 die in diesem Forschungsvorhaben durchgeführten Arbeiten an dem von der TU Delft entwickelten agentenbasierten Strommarktmodell EMLab-Generation, das als Open-Source Modell konzipiert ist. Einen zentralen Aspekt bildet die Übertragung des Modells, das ursprünglich die beiden Regionen CWE (Central-Western- Europe) und UK umfasste, auf ein Modell mit den beiden Regionen Deutschland und Europa (ohne Deutschland), im Wesentlichen in den Grenzen der EU28. Diese Übertragung ist die Grundlage für die Untersuchung unterschiedlicher Fragestellungen hinsichtlich der zukünftigen Entwicklung des Strommarkts in Deutschland innerhalb des europäischen Verbundnetzes bei hohen Anteilen fluktuierender erneuerbarer Energien an der Stromerzeugung.
Nach der Darstellung der konkreten Zielsetzung und der Grundlagen des vorhandenen Modells werden im Hauptteil (Kapitel 2.3) die eigenen Modellierungsarbeiten (Datenaufbereitung, Modellierung und "lessons learned") beschrieben. Im Anschluss erfolgt eine kurze Darstellung einer noch in Erarbeitung befindlichen Masterarbeit zur Berücksichtigung von Risikoaspekten innerhalb des Investitionsalgorithmus' von EMLab-Generation, die sich aus dem internationalen ABM-Workshop als offene methodische Fragestellung von Strommarktmodellen ergeben hat (Kapitel 2.4). Kapitel 2.5 gibt eine kritische Einschätzung der erreichten Modellierungsergebnisse sowie weitere mögliche Anwendungen der neu konzipierten Modellregionen.
Kapitel 3 gibt anschließend einen Überblick über die in diesem Vorhaben durchgeführten gemeinsamen Workshops zwischen TU Delft und Wuppertal Institut sowie den internationalen Workshop, an dem fünf Forschungseinrichtungen aus Deutschland sowie die TU Delft erstmals ihre Erfahrungen mit ABM-Strommarktmodellierung austauschten und methodischen Forschungsbedarf aufarbeiteten.
Der Bericht schließt mit einer kurzen Zusammenfassung sowie einem Ausblick auf weitere Forschungsarbeiten, mit denen die im Rahmen dieser Anbahnungsmaßnahme begonnene Kooperation zwischen Wuppertal Institut und TU Delft fortgesetzt werden soll.
The CO2 utilisation is discussed as one of the future low-carbon technologies in order to accomplish a full decarbonisation in the energy intensive industry. CO2 is separated from the flue gas stream of power plants or industrial plants and is prepared for further processing as raw material. CO2 containing gas streams from industrial processes exhibit a higher concentration of CO2 than flue gases from power plants; consequentially, industrial CO2 sources are used as raw material for the chemical industry and for the synthesis of fuel on the output side. Additionally, fossil resources can be replaced by substitutes of reused CO2 on the input side. If set up in a right way, this step into a CO2-based circular flow economy could make a contribution to the decarbonisation of the industrial sector and according to the adjusted potential, even rudimentarily to the energy sector.
In this study, the authors analyse potential CO2 sources, the potential demand and the range of applications of CO2. In the last chapter of the final report, they give recommendations for research, development, politics and economics for an appropriate future designing of CO2 utilisation options based upon their previous analysis.