Zukünftige Energie- und Industriesysteme
Refine
Year of Publication
- 2016 (71) (remove)
Document Type
- Peer-Reviewed Article (19)
- Report (15)
- Conference Object (12)
- Contribution to Periodical (11)
- Part of a Book (8)
- Working Paper (4)
- Book (1)
- Doctoral Thesis (1)
Die Energiewende erfordert eine neue Energiekultur von Politik, Wissenschaft und Gesellschaft. Der Umstieg auf erneuerbare oder regenerative Energien folgt bislang aber vor allem technologischen und ökonomischen Prämissen. Aus nachhaltiger und vorsorgender Perspektive fehlt die Sorge um und für die Regenerationsfähigkeit der Lebensgrundlagen - auch für zukünftige Generationen. Aufgabe von Politik wäre es, Menschen zu einem regenerativen Umgang mit Energie zu befähigen.
Distributed cogeneration units are flexible and suited to providing balancing power, thereby contributing to the integration of renewable electricity. Against this background, we analysed the technical potential and ecological impact of CHP (combined heat and power) systems on the German minutes reserve market for 2010, 2020 and 2030. Typical CHP plants (from 1 to 2800 kWel) were evaluated in relation to typical buildings or supply cases in different sectors. The minutes reserve potential was determined by an optimisation model with a temporal resolution of 15 min. The results were scaled up to national level using a scenario analysis for the future development of CHP. Additionally, the extent to which three different flexibility measures (double plant size/fourfold storage volume/emergency cooler) increase the potential provision of balancing power was examined. Key findings demonstrate that distributed CHP could contribute significantly to the provision of minutes reserve in future decades. Flexibility options would further enhance the theoretical potential. The grid-orientated operating mode slightly increases CO2 emissions compared to the heat-orientated mode, but it is still preferable to the separate generation of heat and power. However, the impacts of a flexible mode depend greatly on the application and power-to-heat ratio of the individual CHP system.
Insulating existing buildings offers great potential for reducing greenhouse gas emissions and meeting Germany's climate protection targets. Previous research suggests that, since homeowners' decision-making processes are inadequately understood as yet, today's incentives aiming at increasing insulation activity lead to unsatisfactory results. We developed an agent-based model to foster the understanding of homeowners' decision-making processes regarding insulation and to explore how situational factors, such as the structural condition of houses and social interaction, influence their insulation activity. Simulation experiments allow us furthermore to study the influence of socio-spatial structures such as residential segregation and population density on the diffusion of renovation behavior among homeowners. Based on the insights gained, we derive recommendations for designing innovative policy instruments. We conclude that the success of particular policy instruments aiming at increasing homeowners' insulation activity in a specific region depends on the socio-spatial structure at hand, and that reducing financial constraints only has a relatively low potential for increasing Germany's insulation rate. Policy instruments should also target the fact that specific renovation occasions are used to undertake additional insulation activities, e.g. by incentivizing lenders and craftsmen to advise homeowners to have insulation installed.
A key factor to energy-efficiency of heating in buildings is the behavior of households, in particular how they ventilate rooms. Energy demand can be reduced by behavioral change; devices can support this by giving feedback to consumers on their behavior. One such feedback device, called the "CO2 meter", shows indoor air-quality in the colors of a traffic light to motivate so called "shock ventilation", which is energy-efficient ventilation behavior. The following effects of the "CO2 meter" are analyzed: (1) the effect of the device on ventilation behavior within households, (2) the diffusion of "CO2 meter" to other households, and (3) the diffusion of changed behavior to households that do not adopt a "CO2 meter". An agent-based model of these processes for the city of Bottrop (Germany) was developed using a variety of data sources. The model shows that the "CO2 meter" would increase adoption of energy-efficient ventilation by c. 12% and reduce heating demand by c. 1% within 15 years. Technology diffusion was found to explain at least c. 54% of the estimated energy savings; behavior diffusion explains up to 46%. These findings indicate that the "CO2 meter" is an interesting low-cost solution to increase the energy-efficiency in residential heating.
Sustainable energy systems
(2016)
Energy systems across the globe are going through a radical transformation as a result of technological and institutional changes, depletion of fossil fuel resources, and climate change. At the local level, increasing distributed energy resources requires that the centralized energy systems be re-organized. In this paper, the concept of Integrated community energy systems (ICESs) is presented as a modern development to re-organize local energy systems to integrate distributed energy resources and engage local communities. Local energy systems such as ICESs not only ensure self-provision of energy but also provide essential system services to the larger energy system. In this regard, a comparison of different energy system integration option is provided. We review the current energy trends and the associated technological, socio-economic, environmental and institutional issues shaping the development of ICESs. These systems can be applied to both developed and developing countries, however, their objectives, business models as well as composition differs. ICESs can be accepted by different actors such as local governments, communities, energy suppliers and system operators as an effective means to achieve sustainability and thereby will have significant roles in future energy systems.
Facing the uncertainty of CO2 storage capacity in China by developing different storage scenarios
(2016)
China is very active in the research and development of CO2 capture and storage technologies (CCS). However, existing estimates for CO2 storage capacity are very uncertain. This uncertainty is due to limited geological knowledge, a lack of large-scale research on CO2 injection, and different assessment approaches and parameter settings. Hence storage scenarios represent a method that can be used by policy makers to demonstrate the range of possible storage capacity developments, to help interpret uncertain results and to identify the limitations of existing assessments. In this paper, three storage scenarios are developed for China by evaluating China-wide studies supplemented with more detailed site- and basin-specific assessments. It is estimated that the greatest storage potential can be found in deep saline aquifers. Oil and gas fields may also be used. Coal seams are only included in the highest storage scenario. In total, the scenarios presented demonstrate that China has an effective storage capacity of between 65 and 1551 Gt of CO2. Furthermore, the authors emphasise a need for action to harmonise storage capacity assessment approaches due to the uncertainties involved in the capacity assessments analysed in this study.