Zukünftige Energie- und Industriesysteme
Refine
Has Fulltext
- yes (30) (remove)
Year of Publication
- 2012 (30) (remove)
Document Type
- Report (15)
- Peer-Reviewed Article (10)
- Conference Object (3)
- Working Paper (2)
The cement industry is one of the major energy consuming and CO2 emitting sectors in China. In 2010, 1,868 million tons of cement has been produced, which accounted for 56.1% of the world's total cement production. The 11th Five-Year Plan (FYP) (2006-2010) included policy measures for CO2 emission abatement in cement production. Based on the main governmental framework of CO2 mitigation policies at national level in the cement sector, key policies and technologies used during this period are identified and their effects on CO2 reduction are assessed. This paper calculates the reduction of CO2 emissions related to four main policies and technologies for efficient cement production in the 11th and the 12th FYP (2011-2015) with 2005 as a reference year. These are waste heat recovery, closing outdated facilities, substitution for clinker production and other technologies aiming to increase energy efficiency. Due to these measures, we estimate that a total CO2 emission reduction during the 11th FYP of 397 million tonnes could be saved, which is considerably different to 185.75 million tonnes estimated by Zeng (2008) and 303 million tonnes by the NDRC by using different calculation methods. Of the four technologies, the 4th group of energy efficiency increasing techniques was the most important policy and avoided the largest amount of CO2 emissions. Previous energy intensity reduction was mainly due to the outdated production closing and energy efficiency improving. Based on the assessment of technology performance, it appears that there is still a large emission reduction potential in cement production processes. The paper calculates this potential for the 12th FYP period (2011-2015) based on these four identified policy measures. The result is compared to the Chinese government targets in the 12th FYP and promising future CO2 mitigation policies and technologies are proposed, such as the use of alternative energy.
Die atompolitische Wende der Bundesregierung hatte zahlreichen Spekulationen und Befürchtungen Raum gegeben. Es wurde gemutmaßt, dass Deutschland zum Nettostromimporteur werden könnte, sollten die Kraftwerke (wie im Sommer 2011 beschlossen) dauerhaft außer Betrieb bleiben. Darüber hinaus nahm man an, dass die in Deutschland entfallende Stromerzeugung durch Kohlekraftwerke oder durch Importe aus französischen oder tschechischen Atomkraftwerken ersetzt würde und dass Strompreise sowie CO2-Emissionen deutlich ansteigen würden. Inzwischen liegen vorläufige Energiebilanzen und Marktdaten für das Jahr 2011 vor, die viele dieser Befürchtungen widerlegen. Der hier vorgenommene Ausblick auf die mögliche Entwicklung in den kommenden Jahren zeigt zudem, dass die Bilanz von 2011 keine Momentaufnahme sein muss, sondern dass der gegenüber 2010 wegfallende Kernenergiestrom - bilanziell gesehen - voraussichtlich bereits ab 2013 allein durch eine erhöhte regenerative Stromerzeugung kompensiert werden kann.
Der Umbau der durch den Einsatz fossiler Energieträger dominierten Energiesysteme steht weit oben auf der politischen Agenda. Angesichts des fortschreitenden Klimawandels, der Ressourcenverknappung und des ökonomischen Aufholens der Schwellen- und Entwicklungsländer wird diese Frage immer dringlicher. Zahlreiche politische, gesellschaftliche, ökonomische und ökologische Herausforderungen sind mit diesem Umbau verbunden. Angesichts der Langlebigkeit der heute gebauten Infrastrukturen ergibt sich hieraus ein zentrales Feld für die wissenschaftliche Zukunftsforschung. Der Einsatz von Energieszenarios ist über Jahre erprobt und trotz zahlreicher methodischer und inhaltlicher Unsicherheiten bei der Erarbeitung der Szenariostudien bleiben sie unersetzlich - sofern sie wissenschaftliche Standards hinsichtlich der Wertneutralität und Überprüfbarkeit erfüllen. Auch in der geographischen Forschung findet sich das Thema "Energie" wieder verstärkt auf der Agenda. Bereits vor dem Hintergrund der Ölpreiskrisen in den 1970er-Jahren setzten sich Geographinnen und Geographen mit Energiethemen auseinander - angesichts des anstehenden Umbaus der Energiesysteme wird auch wieder die Frage aktuell, inwiefern sich die Transformation des Energiesystems und die Raumstruktur gegenseitig beeinflussen. Dabei werden nicht nur inhaltliche Fragen aufgeworfen, vielmehr ist auch zu klären, wie sich das Thema "Energie" in die etablierten geographischen Forschungsdisziplinen von der Klimageographie über die Wirtschafts- und Bevölkerungsgeographie bis hin zur Siedlungsgeographie eingliedern lässt. Die Ausführungen im vorliegenden Artikel gehen noch einen Schritt weiter und werfen die Frage auf, inwiefern sich durch die Verbindung geographischer Forschung und Energiethemen auch ein neues methodisches Experimentierfeld auftut. Konkret wird aufgezeigt, dass die Geographie verstärkt den Blick in die Zukunft wagen und sich von der Analyse rezenter Strukturen lösen sollte. Die Frage der zukünftigen Raumstrukturen angesichts des Umbaus der Energiesysteme ist von zentraler Bedeutung, unter Anwendung von Methoden der wissenschaftlichen Zukunftsforschung muss die Geographie hier antworten liefern.
The energy potential of agricultural residues in Tanzania has so far not been evaluated and quantified sufficiently. Moreover, the scientific basis for estimations of the sustainable potential of wastes and residues is still very limited. This paper presents an attempt to evaluate the theoretical and technical potential of residues from the sisal sector in Tanzania with regards to energy recovery through anaerobic digestion. The characteristics and availability of sisal residues are defined and a set of sustainability indicators with particular focus on environmental and socio-economic criteria is applied. Our analysis shows that electricity generation with sisal residues can be sustainable and have positive effects on the sustainability of sisal production itself. All sisal residues combined have an annual maximum electricity potential of 102 GW h in 2009, corresponding to up to 18.6 MW of potential electric capacity installations. This estimated maximum potential is equivalent to about 3 % of the country's current power production. Utilizing these residues could contribute to meeting the growing electricity demand and offers an opportunity for decentralized electricity production in Tanzania.
Etude stratégique du mix energétique pour la production d'electricité en Tunisie : rapport final
(2012)
Aufgabenstellung des "Folgeprojekts CCS-Kommunikation" war es, die Bedeutung unterschiedlicher Einflussfaktoren und deren Wechselwirkungen für die Akzeptanz mit Hilfe multivariater statistischer Analysen zu untersuchen. Dabei standen folgende zentrale Fragestellungen im Mittelpunkt der Untersuchungen: Welche Faktoren sind ausschlaggebend für die 1. spontane Einstellung zu CCS? 2. Stabilität spontaner Einstellungen zu CCS? 3. Risiko- und Nutzeneinschätzungen von CCS? 4. Akzeptanz der drei CCS-Prozessschritte? Diese Fragestellungen wurden mit unterschiedlichen multivariaten statistischen Verfahren und differenziert für unterschiedliche Ebenen oder Sachverhalte untersucht.
If the current energy policy priorities are retained, there may be no need to focus additionally on carbon capture and storage (CCS) in the power plant sector of Germany. This applies even in the case of ambitious climate protection targets, according to the results of the presented integrated assessment study. These cover a variety of aspects: Firstly, the technology is not expected to become available on a large scale in Germany before 2025. Secondly, if renewable energies and combined heat and power are expanded further and energy productivity is enhanced, there is likely to be only a limited demand for CCS power plants, as a scenario analysis of CCS deployment in Germany shows. Thirdly, cost analysis using the learning curve approach shows that the electricity generation costs of renewable electricity approach those of CCS power plants. This leads to the consequence that, from 2020, several renewable technologies may well be in a position to offer electricity at a cheaper rate than CCS power plants. In addition, a review of new life cycle assessments for CO2 separation in the power plant sector indicates that the greenhouse gas emissions from 1 kW h of electricity generated by first-generation CCS power plants could only be reduced by 68 % to 87 % (95 % in individual cases). Finally, a cautious, conservative estimate of the effective German CO2 storage capacity of approximately 5 billion tonnes of CO2 is calculated, including a fluctuation range yielding values between 4 and 15 billion tonnes of CO2. Therefore, the total CO2 emissions caused by large point sources in Germany could be stored for 12 years (basic value) or for 8 or 33 years (sensitivity values).
The study presents the results of an integrated assessment of carbon capture and storage (CCS) in the power plant sector in Germany, with special emphasis on the competition with renewable energy technologies. Assessment dimensions comprise technical, economic and environmental aspects, long-term scenario analysis, the role of stakeholders and public acceptance and regulatory issues. The results lead to the overall conclusion that there might not necessarily be a need to focus additionally on CCS in the power plant sector. Even in case of ambitious climate protection targets, current energy policy priorities (expansion of renewable energies and combined heat and power plants as well as enhanced energy productivity) result in a limited demand for CCS. In case that the large energy saving potential aimed for can only partly be implemented, the rising gap in CO2 reduction could only be closed by setting up a CCS-maximum strategy. In this case, up to 22% (41 GW) of the totally installed load in 2050 could be based on CCS. Assuming a more realistic scenario variant applying CCS to only 20 GW or lower would not be sufficient to reach the envisaged climate targets in the electricity sector. Furthermore, the growing public opposition against CO2 storage projects appears as a key barrier, supplemented by major uncertainties concerning the estimation of storage potentials, the long-term cost development as well as the environmental burdens which abound when applying a life-cycle approach. However, recently, alternative applications are being increasingly considered–that is the capture of CO2 at industrial point sources and biomass based energy production (electricity, heat and fuels) where assessment studies for exploring the potentials, limits and requirements for commercial use are missing so far. Globally, CCS at power plants might be an important climate protection technology: coal-consuming countries such as China and India are increasingly moving centre stage into the debate. Here, similar investigations on the development and the integration of both, CCS and renewable energies, into the individual energy system structures of such countries would be reasonable.
Sustainable energy technologies are widely sought-after as essential elements in facing global challenges such as energy security, global warming and poverty reduction. However, in spite of their promising advantages, sustainable energy technologies make only a marginal contribution to meeting energy related needs in both industrialised and developing countries, in comparison to the widespread use of unsustainable technologies. One of the most significant constraints to their adoption and broad diffusion is the socio-economic context in which sustainable energy technologies are supposed to operate. The same holds true for community-based energy projects in developing countries supported by the WISIONS initiative. Practical strategies dealing with these socio-economic challenges are crucial elements for project design and, particularly, for the implementation of project activities. In this paper experiences from implementing community-based projects are reviewed in order to identify the practical elements that are relevant to overcome socio-economic challenges. In order to systematise the findings, an analytical framework is proposed, which combines analytical tools from the socio-technical transition framework and insights from participative approaches to development.
This paper attempts to assess whether renewable energy self-sufficiency can be achieved in the crop production and processing sector in Tanzania and if this could be accomplished in an environmentally sustainable manner. In order to answer these questions the theoretical energy potential of process residues from commercially produced agricultural crops in Tanzania is evaluated. Furthermore, a set of sustainability indicators with focus on environmental criteria is applied to identify risks and opportunities of using these residues for energy generation. In particular, the positive and negative effects on the land-use-system (soil fertility, water use and quality, biodiversity, etc.) are evaluated. The results show that energy generation with certain agricultural process residues could not only improve and secure the energy supply but could also improve the sustainability of current land-use practices.
Purpose - Iran as an energy-rich country faces many challenges in the optimal utilization of its vast resources. High rates of population and economic growth, a generous subsidies program, and poor resource management have contributed to rapidly growing energy consumption and high energy intensity over the past decades. The continuing trend of rising energy consumption will bring about new challenges as it will shrink oil export revenues, restraining economic activities. This calls for a study to explore alternative scenarios for the utilization of energy resources in Iran. The purpose of this paper is to model demand for energy in Iran and develop two business-as-usual and efficiency scenarios for the period 2005-2030.
Design/methodology/approach - The authors use a techno-economic or end-use approach to model energy demand in Iran for different types of energy uses and energy carriers in all sectors of the economy and forecast it under two scenarios: business as usual (BAU) and efficiency.
Findings - Iran has a huge potential for energy savings. Specifically, under the efficiency scenario, Iran will be able to reduce its energy consumption 40 percent by 2030. The energy intensity can also be reduced by about 60 percent to a level lower than the world average today.
Originality/value - The paper presents a comprehensive study that models the Iranian energy demand in different sectors of the economy, using data at different aggregation levels and a techno-economic end-use approach to illuminate the future of energy demand under alternative scenarios.
The need for an "Energy Roadmap 2050" triggered a multitude of studies that were conducted between 2009 and 2011, which again contained a multitude of decarbonisation scenarios, which achieve the EU's long-term emission mitigation target of reducing greenhouse gas emissions by at least 80% until 2050 (relative to 1990 emissions). The variety of important analysis is difficult to compare and utilize for specific and timely policy decisions. Thus the Smart Energy for Europe Platform (SEFEP) has commissioned a comparative study of relevant energy scenario studies for Europe. The findings of this comparative study are summarized here briefly.