Zukünftige Energie- und Industriesysteme
Refine
Year of Publication
Document Type
- Peer-Reviewed Article (168)
- Report (119)
- Conference Object (92)
- Part of a Book (52)
- Contribution to Periodical (28)
- Working Paper (20)
- Doctoral Thesis (8)
- Book (3)
- Habilitation (1)
- Master Thesis (1)
Language
- English (493) (remove)
Urbanization and climate change are amongst the greatest challenges of the 21st century. In the "Low Carbon Future Cities" project (LCFC), three important problem dimensions are analysed: current and future GHG emissions and their mitigation (up to 2050); resource use and material flows; and vulnerability to climate change.
The industrial city of Wuxi has been the Chinese pilot city of the project. To establish the pathway for a low carbon future, it is crucial to understand the current situation and possible future developments. The paper presents the key results of the status quo analysis and the future scenario analysis carried out for Wuxi. Two scenarios are outlined. The Current Policy Scenario (CPS) shows the current most likely development in the area of energy demand and GHG emissions until 2050. Whereas the extra low carbon scenario (ELCS) assumes a significantly more ambitious implementation, it combines a market introduction of best available technologies with substantial behavioural change. All scenarios are composed of sub-scenarios for the selected key sectors.
Looking at the per capita emissions in Wuxi, the current levels are already high at around 12 tonnes CO2 per capita compared to Western European cities. Although Wuxi has developed a low carbon plan, the projected results under current policies (CPS) show that the total emissions would increase to 23.6 tonnes CO2 per capita by 2050. If the ELCS pathway was to be adopted, these CO2 emission levels could be reduced to 6.4 tonnes per capita by 2050.
Despite Germany's Paris Agreement pledge and coal exit legislation, the political debate around carbon-intensive coal remains heated. Coal power and mining have played an important, yet changing role in the history of German politics. In this paper, we analyze the entire parliamentary debate on coal in the German parliament (Bundestag) from its inception in 1949 to 2019. For this purpose we extract the more than 870,000 parliamentary speeches from all protocols in the history of the Bundestag. We identify the 9167 speeches mentioning coal and apply dynamic topic modeling – an unsupervised machine learning technique that reveals the changing thematic structure of large document collections over time - to analyze changes in parliamentary debates on coal over the past 70 years. The trends in topics and their varying internal structure reflect how energy policy was discussed and legitimized over time: Initially, coal was framed as a driver of economic prosperity and guarantee of energy security. In recent years, the debate evolved towards energy transition, coal phase-out and renewable energy expansion. Germany’s smaller and younger parties, the Greens and the Left Party, debate coal more often in the context of the energy transition and climate protection than other parties. Our results reflect trends in other countries and other fields of energy policy. Methodologically, our study illustrates the potential of and need for computational methods to analyze vast corpora of text and to complement traditional social science methods.
Although smart energy technologies (SETs) can fulfill multiple tasks in increasingly decarbonized and digitalized energy systems, market diffusion is still limited. This study investigates which beliefs influence consumers' intention to adopt two smart-energy offerings, whether the rapid growth of the smart home market will now drive SET adoption, and if consumer-driven diffusion will lead to sustainability potentials being realized. Building on UTAUT2, a new theoretical model is proposed, and a consumer acceptance survey was conducted in Germany (n = 700). Results indicate that a growing smart home market will not increase SET adoption and that "adjustable green defaults" should be introduced.
Water and energy are two pivotal areas for future sustainable development, with complex linkages existing between the two sectors. These linkages require special attention in the context of the energy transition. Against this background, this paper analyses the role of water availability in the development of solar thermal and photovoltaic power plants for the case of the Draa Valley in southern Morocco. Located in a semi-arid to arid mountainous area, the Drâa Valley faces high water stress - a situation expected to worsen due to climate change. At the same time, the region has one of the greatest potentials for solar energy in the world. To examine whether limited water availability could accelerate or delay the implementation of solar thermal and photovoltaic power plants, this paper compares regional water availability and demand in the Draa Valley for different scenarios, paying particular attention to potential socio-economic development pathways. The Water Evaluation and Planning System software is applied to allocate the water resources in the study region. The water supply is modelled under the Representative Concentration Pathway 8.5 climate scenario, while the water demand for the Drâa Valley is modelled for a combination of three socio-economic and two energy scenarios. The climate scenario describes a significant decrease in water availability by 2050, while the socio-economic and energy scenarios show an increase in water demand. The results demonstrate that during a sequence of dry years the reservoirs water availability is reduced and shortages in water supply can result in high levels of unmet demand. If this situation occurs, oasis farming, water for drinking and energy production could compete directly with each other for water resources. The energy scenarios indicate that the use of dry cooling technologies in concentrated solar power and photovoltaic hybrid systems could be one option for reducing competition for the scarce water resources in the region. However, given that energy generation accounts for only a small share of the regional water demand, the results also suggest that socio-economic demand reduction, especially in the agricultural sector, for example by reducing the cultivated area, will most likely become necessary.
In this brochure, WISIONS focuses on the interdependent connection between water and energy. WISIONS presents good practice projects dealing with water and energy in Guatemala, Peru, Tunisia, the Philippines and Tanzania that have been successfully implemented, with the intention of further promoting the particular approaches used by these projects. Using a key number of internationally accepted criteria, the main consideration for the selection of the projects was energy and resource efficiency. The assessment of the projects also included the consideration of regional factors acknowledging different needs and potentials.
Electricity generation requires water. With the global demand for electricity expected to increase significantly in the coming decades, the water demand in the power sector is also expected to rise. However, due to the ongoing global energy transition, the future structure of the power supply - and hence future water demand for power generation - is subject to high levels of uncertainty, because the volume of water required for electricity generation varies significantly depending on both the generation technology and the cooling system. This study shows the implications of ambitious decarbonization strategies for the direct water demand for electricity generation. To this end, water demand scenarios for the electricity sector are developed based on selected global energy scenario studies to systematically analyze the impact up to 2040. The results show that different decarbonization strategies for the electricity sector can lead to a huge variation in water needs. Reducing greenhouse gas emissions (GHG) does not necessarily lead to a reduction in water demand. These findings emphasize the need to take into account not only GHG emission reductions, but also such aspects as water requirements of future energy systems, both at the regional and global levels, in order to achieve a sustainable energy transition.
In this second brochure, WISIONS aims to focus on the significance of a combined approach to water and energy and to present a number of projects from around the globe that have been successfully implemented, with the intention of further promoting the particular approaches used by these projects. Using a key number of internationally accepted criteria, the main consideration for selection of the projects was energy and resource efficiency, but social aspects such as the inclusion of local population were also of relevance. The assessment of the projects also included the consideration of regional factors acknowledging different needs and potentials.
For some time, 3D printing has been a major buzzword of innovation in industrial production. It was considered a game changer concerning the way industrial goods are produced. There were early expectations that it might reduce the material, energy and transport intensity of value chains. However for quite a while, the main real world applications of additive manufacturing (AM) have been some rapid prototyping and the home-based production of toys made from plastics. On this limited basis, any hypotheses regarding likely impacts on industrial energy efficiency appeared to be premature. Notwithstanding the stark contrast between early hype and practical use, the diffusion of AM has evolved to an extent that at least for some applications allows for a preliminary assessment of its likely implications for energy efficiency.
Unlike many cross-cutting energy efficiency technologies, energy use of AM may vary substantially depending on industry considered and material used for processing. Moreover, AM may have much greater repercussions on other stages of value chains than conventional cross-cutting energy efficiency technologies. In case of AM with metals the following potential determinants of energy efficiency come to mind:
- A reduction of material required per unit of product and used during processing;
- Changes in the total number and spatial allocation of certain stages of the value chain; and
- End-use energy efficiency of final products.
At the same time, these various streams of impact on energy efficiency may be important drivers for the diffusion of AM with metals. This contribution takes stock of AM with metals concerning applications and processes used as well as early evidence on impacts on energy efficiency and combine this into a systematic overview. It builds on relevant literature and a case study on Wire Arc Additive Manufacturing performed within the REINVENT project.