Zukünftige Energie- und Industriesysteme
Refine
Has Fulltext
- yes (281) (remove)
Year of Publication
Document Type
- Peer-Reviewed Article (131)
- Report (77)
- Conference Object (38)
- Working Paper (16)
- Contribution to Periodical (11)
- Part of a Book (5)
- Book (2)
- Master Thesis (1)
Language
- English (281) (remove)
Power sector decarbonisation : metastudy ; WP 2.2 quantitative analysis of existing EU-wide studies
(2012)
In the energy sector, few topics, if any, are more hyped than hydrogen. Countries develop hydrogen strategies to provide a perspective for hydrogen production and use in order to meet climate-neutrality goals. However, in this topical field the role of water is less accentuated. Hence, in this study, we seek to map the interrelations between the water and wastewater sector on the one hand and the hydrogen sector on the other hand, before reflecting upon our findings in a country case study. We chose the Hashemite Kingdom of Jordan because (i) hydrogen is politically discussed not least due to its high potentials for solar PV, and (ii) Jordan is water stressed - definitely a bad precondition for water-splitting electrolyzers. This research is based on a project called the German-Jordanian Water-Hydrogen-Dialogue (GJWHD), which started with comprehensive desk research mostly to map the intersectoral relations and to scope the situation in Jordan. Then, we carried out two expert workshops in Wuppertal, Germany, and Amman, Jordan, in order to further discuss the nexus by inviting a diverse set of stakeholders. The mapping exercise shows various options for hydrogen production and opportunities for planning hydrogen projects in water-scarce contexts such as Jordan.
Energy of the future? : Sustainable mobility through fuel cells and H2 ; Shell hydrogen study
(2017)
Over the years Shell has produced a number of scenario studies on key energy issues. These have included studies on important energy consumption sectors such as passenger cars and commercial vehicles (lorries and buses) and the supply of energy and heat to private households, as well as studies on the state of and prospects for individual energy sources and fuels, including biofuels, natural gas and liquefied petroleum gas.
Shell has been involved in hydrogen production as well as in research, development and application for decades, with a dedicated business unit, Shell Hydrogen. Now, in cooperation with the Wuppertal Institute in Germany, Shell has conducted a study on hydrogen as a future energy source. The study looks at the current state of hydrogen supply path- ways and hydrogen application technologies and explores the potential and prospects for hydrogen as an energy source in the global energy system of tomorrow. The study focuses on the use of hydrogen in road transport and specifically in fuel cell electric vehicles (FCEVs), but it also examines non-automotive resp. stationary applications.
Biogas and bio-methane that are based on energy crops are renewable energy carriers and therefore potentially contribute to climate protection. However, significant greenhouse gas (GHG) emissions resulting from agricultural production processes must be considered. Among those, the production and use of fertilizer, and the resulting leaching of nitrous oxide (N2O), are crucial factors. This article provides an integrated life cycle assessment (LCA) of biogas (i.e. bio-methane that has been upgraded and injected into the natural gas grid), taking into account the processes of fermentation, upgrading and injection to the grid for two different types of biogas plants. The analysis is based on different feedstocks from crop rotation systems for different locations in Germany. A special focus is on the sensitivity of assumptions of nitrous oxide emissions to overall GHG emissions. Much research exists on the measurement or modeling of the actual N2O emissions that result from farming processes. Since there is as yet no precise regional data, most analyses use tier-1 data from the IPCC national GHG inventories as a default. The present article coincides with recent research in indicating that this data varies at the regional level. However, it is not the scope of the article to evaluate the quality of existing data for N2O emissions, but to show the effects of different assumptions on the LCA of GHGs from bio-methane. Thus, a link between the provision of emission data and the practical implementation of biogas technology is provided. The main result is that the supply chain of substrates from agricultural processes appears to contribute the most to the GHG emissions of bio-methane. The "worst case" scenario where 5% of the nitrogen fertilizer used is emitted in form of N2O shows that the GHG mitigation potential of bio-methane versus natural gas is very small, so there is not much margin for error in the plant technology.
Renewable energy plays a key role in the sustainable pathway towards a low carbon future and, despite new supply capacities, the transformation of the energy system also requires the adoption of a method which allows for the integration of increasing amounts of renewable energy. This requires a transition to more flexible processes at an industrial level and demand side management (DSM) is one possible way of achieving this transition. Currently, increased shares of variable renewable energy can cause the electricity supply to become more volatile and result in changes to the electricity market. In order to develop a new dynamic equilibrium to balance supply and demand, sufficient flexibility in demand is required. As adequate storage systems are not available in the short to medium term, the potential for large electricity consumers to operate flexibly is an attractive, pragmatic and feasible option. Recent studies in Germany suggest that there is significant potential for DSM in so-called "energy-intensive industries". However, the figures (which fall in the approximate range of 1,250-2,750 MW positive and 400-1,300 MW negative shiftable load) should be interpreted with caution. The range of industrial processes considered are diverse and vary from plant to plant, with the result that it is difficult to provide accurate calculations of the accumulated potential for Germany or the EU as a whole. Based on extensive surveys and panel discussions with representatives from energy-intensive industries (aluminum, cement, chemicals, iron & steel, pulp & paper), which together account for approximately one third of the industrial electricity demand in Germany, our paper provides an overview of both the opportunities and the barriers faced by DSM. One of the key findings is the possible loss in energy efficiency due to DSM: in order to decrease or increase production depending on the stability needs of the electricity system, plants and processes may no longer operate at their optimum levels. The effects on downstream production must also be taken into account in order to gain a more complete understanding of the overall effects of industrial DSM.
The increasing rate of renewable energies poses new challenges for industries: the amount of wind and solar energy is by far more subject to fluctuations than that of fossil based energy. Large production facilities from the aluminium, cement, steel or paper industry, however, depend on a highly secure energy supply. To which amount is a limitation of fluctuations possible? This was the key question of the project "Flexibilisation of Industries Enables Sustainable Energy systems", which was realised by the Wuppertal Institute in cooperation with the polymers company Covestro last year. In the final report, authors around project co-ordinator Karin Arnold not only show which technological and economic parameters have been considered, but also present possible business models to promote "flexibility products".
Options and potentials for energy end-use efficiency and energy services : summary ; final report
(2006)
The overall objective of the web-based consumer information tool Euro-Topten is to promote the market transformation towards energy efficient products. Euro-Topten informs consumers about the most energy efficient products in various categories and thereby aims to directly influence the purchasing decisions of individuals or professional buyers.
Providers of internet-based information tools are confronted with the problem, that there is no bidirectional interaction with the users. Hence, it is difficult to evaluate if the specific needs of users are addressed, if and how the user processes this information and to what extent the information influences the user's decision making process.
To study these questions, a web-based survey was conducted in two consecutive rounds. In the first round the survey focused on the assessment of the information tool itself and the motivation for using the Euro-Topten websites. This survey was online on all active Euro-Topten partner websites from October to December 2012. In total, 1791 users completed the survey.
In the second round, a subset of the survey population was queried again. 1,043 participants agreed to take part in a more comprehensive follow up survey, 383 completed the second survey between May and July 2013. The second survey concentrated on the question how Euro-Topten has influenced the purchasing behaviour of the survey participants. This gave significant insights on how the information on the Euro-Topten websites has affected purchasing decisions of the surveyed users.
Based on a comparison of performance indicators of the most efficient products recommended on the Euro-Topten websites with performance indicators of a base case product available on the market, avoided energy demand could be estimated for those users, who bought products from the Euro-Topten list. Based on these results, two impacts of Euro-Topten could be estimated: The influence of Euro-Topten on purchasing decision of users and the associated reductions in energy demand and CO2-emissions.