Zukünftige Energie- und Industriesysteme
Refine
Year of Publication
- 2016 (19) (remove)
Document Type
- Peer-Reviewed Article (19) (remove)
Division
- Zukünftige Energie- und Industriesysteme (19) (remove)
Distributed cogeneration units are flexible and suited to providing balancing power, thereby contributing to the integration of renewable electricity. Against this background, we analysed the technical potential and ecological impact of CHP (combined heat and power) systems on the German minutes reserve market for 2010, 2020 and 2030. Typical CHP plants (from 1 to 2800 kWel) were evaluated in relation to typical buildings or supply cases in different sectors. The minutes reserve potential was determined by an optimisation model with a temporal resolution of 15 min. The results were scaled up to national level using a scenario analysis for the future development of CHP. Additionally, the extent to which three different flexibility measures (double plant size/fourfold storage volume/emergency cooler) increase the potential provision of balancing power was examined. Key findings demonstrate that distributed CHP could contribute significantly to the provision of minutes reserve in future decades. Flexibility options would further enhance the theoretical potential. The grid-orientated operating mode slightly increases CO2 emissions compared to the heat-orientated mode, but it is still preferable to the separate generation of heat and power. However, the impacts of a flexible mode depend greatly on the application and power-to-heat ratio of the individual CHP system.
Energy systems across the globe are going through a radical transformation as a result of technological and institutional changes, depletion of fossil fuel resources, and climate change. At the local level, increasing distributed energy resources requires that the centralized energy systems be re-organized. In this paper, the concept of Integrated community energy systems (ICESs) is presented as a modern development to re-organize local energy systems to integrate distributed energy resources and engage local communities. Local energy systems such as ICESs not only ensure self-provision of energy but also provide essential system services to the larger energy system. In this regard, a comparison of different energy system integration option is provided. We review the current energy trends and the associated technological, socio-economic, environmental and institutional issues shaping the development of ICESs. These systems can be applied to both developed and developing countries, however, their objectives, business models as well as composition differs. ICESs can be accepted by different actors such as local governments, communities, energy suppliers and system operators as an effective means to achieve sustainability and thereby will have significant roles in future energy systems.
Insulating existing buildings offers great potential for reducing greenhouse gas emissions and meeting Germany's climate protection targets. Previous research suggests that, since homeowners' decision-making processes are inadequately understood as yet, today's incentives aiming at increasing insulation activity lead to unsatisfactory results. We developed an agent-based model to foster the understanding of homeowners' decision-making processes regarding insulation and to explore how situational factors, such as the structural condition of houses and social interaction, influence their insulation activity. Simulation experiments allow us furthermore to study the influence of socio-spatial structures such as residential segregation and population density on the diffusion of renovation behavior among homeowners. Based on the insights gained, we derive recommendations for designing innovative policy instruments. We conclude that the success of particular policy instruments aiming at increasing homeowners' insulation activity in a specific region depends on the socio-spatial structure at hand, and that reducing financial constraints only has a relatively low potential for increasing Germany's insulation rate. Policy instruments should also target the fact that specific renovation occasions are used to undertake additional insulation activities, e.g. by incentivizing lenders and craftsmen to advise homeowners to have insulation installed.
Contrary to "static" pathways that are defined once for all, this article deals with the need for policy makers to adopt a dynamic adaptive policy pathway for managing decarbonization over the period of implementation. When choosing a pathway as the most desirable option, it is important to keep in mind that each decarbonization option relies on the implementation of specific policies and instruments. Given structural, effectiveness, and timing uncertainties specific to each policy option, they may fail in delivering the expected outcomes in time. The possibility of diverging from an initial decarbonization trajectory to another one without incurring excessive costs should therefore be a strategic element in the design of an appropriate decarbonization strategy. The article relies on initial experiences in France and Germany on decarbonization planning and implementation to define elements for managing dynamic adjustment issues. Such an adaptive pathway strategy should combine long-lived incentives, like a pre-announced escalating carbon price, to form consistent expectations, as well as adaptive policies to improve overall robustness and resilience. We sketch key elements of a monitoring process based on an ex ante definition of leading indicators that should be assessed regularly and combined with signposts and trigger values at the subsector level.
Die EnEV ist eine Vorgabe, welche die alternativen Optionen zur Bestimmung des Energiebedarfs und seiner unterschiedlichen Deckungsoptionen mittels einer Metrik, dem ausgelösten Primärenergiebedarf - die Intention gemäß EPBD - bzw. dem ausgelösten nicht-erneuerbaren Energiebedarf - so die EnEV-Adaptation -, vergleichbar macht. Sie normiert somit ein Wettbewerbsverhältnis zwischen Optionen. Die beiden herausgestellten Entscheidungen, die EnEV-Adaptation und die Entscheidung, den Primärenergiefaktor PEFne gegen Null konvergieren zu lassen, verändern somit Wettbewerbsverhältnisse. Der Diskussionsbeitrag geht den damit im Zusammenhang stehenden Fragen nach.
One of the factors decelerating a further diffusion of the carbon capture and storage (CCS) technology is the public's negative perception of early pilot or demonstration activities in Germany as well as in other countries. This study examined the public perception of CCS in more detail by looking into different options within the CCS chain, i.e. for the three elements capture, transport and storage. This was analyzed using an experimental approach, realized in an online survey with a representative German sample of 1830 citizens. Each participant evaluated one of 18 different CCS scenarios created using three types of CO2 source (industry, biomass, coal), two transport options (pipeline vs. no specification), and three storage possibilities (saline aquifer, depleted gas field, enhanced gas recovery (EGR)).
Overall, we found that the ratings of CCS were neutral on average. However, if the CO2 is produced by a biomass power plant or industry, CCS is rated more positively than in a scenario with a coal-fired power plant. The specifications of transport and storage interacted with each other such that scenarios including EGR or a depleted gas field without mentioning a pipeline were evaluated better than storing it in a saline aquifer or a depleted gas field and mentioning a pipeline as means of transport. Exploratory regression analyses indicate the high relevance of the respective CO2 source in general as well as the perceived importance of this source for Germany.
In Germany, doubling today's insulation rate of about 1% is an important element for reaching the government's target of reducing the demand for energy in the housing sector by 80% by 2050. A survey among 275 private homeowners was conducted to better understand their insulation activity. The results were incorporated into an agent-based model, which was applied to evaluate new policy options. The results of the survey show that policies should focus on homeowners' wall insulation activity. Homeowners' decision-making processes regarding insulation are largely unaffected by their financial resources, which raises the question of the usefulness of financial incentives. In contrast, non-economic factors were found to have a statistically significant influence: in the year following a house ownership change, a comparatively large number of insulation projects are carried out. The probability of insulating walls can be predicted from knowing the homeowner's age, attitude towards insulation, and the structural condition of the walls. The simulations indicate that information instruments lead to a comparatively small increase in the wall insulation rate, while obligating new homeowners to insulate the walls within the first year after moving in has the potential to increase the total insulation rate by up to 40%.
The need for deep decarbonisation in the energy intensive basic materials industry is increasingly recognised. In light of the vast future potential for renewable electricity the implications of electrifying the production of basic materials in the European Union is explored in a what-if thought-experiment. Production of steel, cement, glass, lime, petrochemicals, chlorine and ammonia required 125 TW-hours of electricity and 851 TW-hours of fossil fuels for energetic purposes and 671 TW-hours of fossil fuels as feedstock in 2010. The resulting carbon dioxide emissions were equivalent to 9% of total greenhouse gas emissions in EU28. A complete shift of the energy demand as well as the resource base of feedstocks to electricity would result in an electricity demand of 1713 TW-hours about 1200 TW-hours of which would be for producing hydrogen and hydrocarbons for feedstock and energy purposes. With increased material efficiency and some share of bio-based materials and biofuels the electricity demand can be much lower. Our analysis suggest that electrification of basic materials production is technically possible but could have major implications on how the industry and the electric systems interact. It also entails substantial changes in relative prices for electricity and hydrocarbon fuels.
Auf dem Weg vom Energierohstoff zum Endnutzer entstehen Energieverluste durch Transport, Aufbereitung und Umwandlung, die dazu führen, dass der Primärenergieträger, also der Energierohstoff, nur mit einem bestimmten Nutzungsgrad in einen Endenergieträger (vom Endkunden eingekauften Energieträger für die Nutzung im Gebäude) umgewandelt wird. Der Kehrwert dieses Nutzungsgrades heißt "Primärenergiefaktor". Je größer der Primärenergiefaktor, desto größer die Verluste der Bereitstellung.
Staatliche Regulierung ist verpönt. Häufig läuft es dann auf den Appell hinaus: Jeder einzelne Bürger habe es selbst in der Hand. Doch die Alltagsroutinen sind in der Regel mächtiger als das Umweltbewusstsein. Beim Marmor für das Badezimmer spielen Amortisationszeiten keine Rolle. Die solare Warmwasseranlage ist dagegen oftmals "zu teuer". Gesetzliche Standards hingegen verselbstständigen Energieeffizienz und den Ausbau erneuerbarer Energien. Sie machen "Öko zur Routine". Dieser Artikel beschreibt die Notwendigkeit für das Schaffen neuer Routinen und zeigt wie dies durch Standards, Limits und faire Umsetzungsbedingungen sowie attraktive Alternativangebote zum gegenwärtigen, häufig nicht nachhaltigen Verhalten auch möglich ist.