Zukünftige Energie- und Industriesysteme
Refine
Year of Publication
Document Type
- Peer-Reviewed Article (168)
- Report (117)
- Conference Object (92)
- Part of a Book (52)
- Contribution to Periodical (28)
- Working Paper (20)
- Doctoral Thesis (8)
- Book (3)
- Habilitation (1)
- Master Thesis (1)
Language
- English (491) (remove)
Both focus group discussions and information-choice questionnaires (ICQs) have previously been used to examine informed public opinions about carbon dioxide capture and storage (CCS). This paper presents an extensive experimental study to systematically examine and compare the quality of opinions created by these two research techniques. Depending on experimental condition, participants either participated in a focus group meeting or completed an ICQ. In both conditions participants received identical factual information about two specific CCS options. After having processed the information, they indicated their overall opinion about each CCS option. The quality of these opinions was determined by looking at three outcome-oriented indicators of opinion quality: consistency, stability, and confidence. Results for all three indicators showed that ICQs yielded higher-quality opinions than focus groups, but also that focus groups did not perform poor in this regard. Implications for the choice between focus group discussions and ICQs are discussed.
Urban energy systems have been commonly considered to be socio-technical systems within the boundaries of an urban area. However, recent literature challenges this notion in that it urges researchers to look at the wider interactions and influences of urban energy systems wherein the socio-technical sphere is expanded to political, environmental and economic realms as well. In addition to the inter-sectoral linkages, the diverse agents and multilevel governance trends of energy sustainability in the dynamic environment of cities make the urban energy landscape a complex one. There is a strong case then for establishing a new conceptualisation of urban energy systems that builds upon these contemporary understandings of such systems. We argue that the complex systems approach can be suitable for this. In this paper, we propose a pilot framework for understanding urban energy systems using complex systems theory as an integrating plane. We review the multiple streams of urban energy literature to identify the contemporary discussions and construct this framework that can serve as a common ontological understanding for the different scholarships studying urban energy systems. We conclude the paper by highlighting the ways in which the framework can serve some of the relevant communities.
Access to sustainable and affordable energy services is a crucial factor in reducing poverty in developing countries. In particular, small-scale and community-based renewable energy projects are recognized as important forms of development assistance for reaching the energy poor. However, to date only a few empirical evaluations exist which analyze and compare the impact of these projects on local living conditions and their sustainability ex-post implementation.
To better understand the impacts and the conditions that influence sustainability of these projects, the research presented in this paper evaluated 23 local development projects post implementation. By applying an standardized evaluation design to a cross-sectional sample in terms of renewable energy sources (solar, wind, biomass, hydro), user needs (electricity, food preparation, lighting, productive uses), community management models, finance mechanisms and geographical locations, the review results provide valuable insights on the underlying conditions that influence the success or failure of these small-scale local energy interventions. The empirical evidence suggests that the sustainability of small-scale energy implementations (≤100 kW) in developing countries is determined by the same factors, independent of the socio-cultural, political and ecological context. These findings allow to better predict the long-term success of small sustainable energy projects in developing countries, this can help to improve project designs and increase the certainty for future investment decisions.
New energy technologies may fail to make the transition to the market once research funding has ended due to a lack of private engagement to conclude their development. Extending public funding to cover such experimental developments could be one way to improve this transition. However, identifying promising research and development (R&D) proposals for this purpose is a difficult task for the following reasons: Close-to-market implementations regularly require substantial resources while public budgets are limited; the allocation of public funds needs to be fair, open, and documented; the evaluation is complex and subject to public sector regulations for public engagement in R&D funding. This calls for a rigorous evaluation process. This paper proposes an operational three-staged decision support system (DSS) to assist decision-makers in public funding institutions in the ex-ante evaluation of R&D proposals for large-scale close-to-market projects in energy research. The system was developed based on a review of literature and related approaches from practice combined with a series of workshops with practitioners from German public funding institutions. The results confirm that the decision-making process is a complex one that is not limited to simply scoring R&D proposals. Decision-makers also have to deal with various additional issues such as determining the state of technological development, verifying market failures or considering existing funding portfolios. The DSS that is suggested in this paper is unique in the sense that it goes beyond mere multi-criteria aggregation procedures and addresses these issues as well to help guide decision-makers in public institutions through the evaluation process.
Conventional new buildings in OECD countries with a history of building codes save about 50 % of energy compared to average buildings in the building stock. This improvement, however, is not enough to create a building standard with low lifetime costs nor to reach long-term climate protection targets. Much higher energy savings can already be achieved through proven high-efficiency building concepts bringing net economic benefits among other advantages.
A strategic approach to integrated building design is the key to achieving these high-energy savings at low or no extra cost in residential buildings. In our paper we describe the "Easy Efficiency Approach", which can reduce primary energy consumption by 40 to 60 % compared to conventional new building standards, or by 70% to 80% when compared to the primary energy consumption of the existing building stock, and should be regarded as the minimum. This strategy focuses on low-cost options, mainly passive options. Although it can already significantly reduce energy consumption, this first step will not be sufficient to reach long-term climate protection goals. It is thus necessary to implement and support what we call an "Advanced Efficiency Approach", with savings up to 90% , as compared to new building standards, as soon as possible to avoid lock-in effects. Further improvements, especially through the active use of renewable energies, reduce the net primary energy demand to 0 % and beyond.
According to the chosen strategy clearly defined energy performance ranges, with reference to possible savings, for different climate zones worldwide are given. In verifying this approach simulations with BAT (Best Available Technologies) buildings of different types (single family, multi family, high rise) were carried out in close cooperation with project partners. This data has also been verified through an empirical database of built examples both for energy consumption as well their economic soundness.
The Paris Agreement introduces long-term strategies as an instrument to inform progressively more ambitious emission reduction objectives, while holding development goals paramount in the context of national circumstances. In the lead up to the twenty-first Conference of the Parties, the Deep Decarbonization Pathways Project developed mid-century low-emission pathways for 16 countries, based on an innovative pathway design framework. In this Perspective, we describe this framework and show how it can support the development of sectorally and technologically detailed, policy-relevant and country-driven strategies consistent with the Paris Agreement climate goal. We also discuss how this framework can be used to engage stakeholder input and buy-in; design implementation policy packages; reveal necessary technological, financial and institutional enabling conditions; and support global stocktaking and increasing of ambition.
Given large potentials of the MENA region for renewable energy production, transitions towards renewables-based energy systems seem a promising way for meeting growing energy demand while contributing to greenhouse gas emissions reductions according to the Paris Agreement at the same time. Supporting and steering transitions to a low-carbon energy system require a clear understanding of socio-technical interdependencies in the energy system as well as of the principle dynamics of system innovations. For facilitating such understanding, a phase model for renewables-based energy transitions in MENA countries, which structures the transition process over time through the differentiation of a set of sub-sequent distinct phases, is developed in this article. The phase model builds on a phase model depicting the German energy transition, which was complemented by insights about transition governance and adapted to reflect characteristics of the MENA region. The resulting model includes four phases ("Take-off renewables", "System integration", "Power to fuel/gases”, "Towards 100% renewables”), each of which is characterized by a different cluster of innovations. These innovations enter the system via three stages of development which describe different levels of maturity and market penetration, and which require appropriate governance. The phase model has the potential to support strategy development and governance of energy transitions in MENA countries in two complementary ways: it provides an overview of techno-economic developments as orienting guidelines for decision-makers, and it adds some guidance as to which governance approaches are suitable for supporting those developments.
This article reviews the literature on the past cost dynamics of various renewable, fossil fuel and nuclear electricity generation technologies. It identifies 10 different factors which have played key roles in influencing past cost developments according to the literature. These 10 factors are: deployment-induced learning, research, development and demonstration (RD&D)-induced learning, knowledge spillovers from other technologies, upsizing, economies of manufacturing scale, economies of project scale, changes in material and labour costs, changes in fuel costs, regulatory changes, and limits to the availability of suitable sites. The article summarises the relevant literature findings for each of these 10 factors and provides an overview indicating which factors have impacted on which generation technologies. The article also discusses the insights gained from the review for a better understanding of possible future cost developments of electricity generation technologies. Finally, future research needs, which may support a better understanding of past and future cost developments, are identified.
The production of commodities by energy-intensive industry is responsible for 1/3 of annual global greenhouse gas (GHG) emissions. The climate goal of the Paris Agreement, to hold the increase in the global average temperature to well below 2 °C above pre-industrial levels while pursuing efforts to limit the temperature increase to 1.5 °C, requires global GHG emissions reach net-zero and probably negative by 2055-2080. Given the average economic lifetime of industrial facilities is 20 years or more, this indicates all new investment must be net-zero emitting by 2035-2060 or be compensated by negative emissions to guarantee GHG-neutrality. We argue, based on a sample portfolio of emerging and near-commercial technologies for each sector (largely based on zero carbon electricity & heat sources, biomass and carbon capture, and catalogued in an accompanying database), that reducing energy-intensive industrial GHG emissions to Paris Agreement compatible levels may not only be technically possible, but can be achieved with sufficient prioritization and policy effort. We then review policy options to drive innovation and investment in these technologies. From this we synthesize a preliminary integrated strategy for a managed transition with minimum stranded assets, unemployment, and social trauma that recognizes the competitive and globally traded nature of commodity production. The strategy includes: an initial policy commitment followed by a national and sectoral stakeholder driven pathway process to build commitment and identify opportunities based on local zero carbon resources; penetration of near-commercial technologies through increasing valuation of GHG material intensity through GHG pricing or flexible regulations with protection for competitiveness and against carbon leakage; research and demand support for the output of pilot plants, including some combination of guaranteed above-market prices that decline with output and an increasing requirement for low carbon inputs in government procurement; and finally, key supporting institutions.
A number of "roadmapping" activities are being carried out internationally with the aim of planning and facilitating transitions to hydrogen energy systems. However, there is an evident discrepancy between the treatment of quantitative and qualitative information in the majority of roadmapping efforts. Whilst quantitative information is frequently analysed in numerical and computational models, conversely qualitative information tends to be incorporated on a significantly more ad hoc basis. Previous attempts at incorporating qualitative considerations have not usually been systematised. In this paper we present a methodology aimed at increasing the rigour with which qualitative information is treated in hydrogen roadmapping activities. The key changes and actor mapping (KCAM) methodology was developed as the primary qualitative component of the European Hydrogen Energy Roadmap project "HyWays". KCAM, developed from a well known general systems development model, constitutes a means of qualitatively analysing variable hydrogen supply chains that is structured, systematic and flexible.
The establishment of the Leveraging a Climate-neutral Society–strategic Research Network (LCS–RNet) (then named the International Research Network for Low Carbon Societies) was proposed at the Group of Eight (G8) Environment Ministers’ Meeting in 2008. Its 12th annual meeting in December 2021 focused on the discussion on how to transition into a just and sustainable society and how to reduce the risks associated with the transition. This requires comprehensive studies including on the concept of transition, pathways to net-zero societies and how to realise the pathways by collaborating with various stakeholders. This Special Feature provides new insights into sustainability science by linking the scientific knowledge with practical science for the transition through the exploration of studies presented at the annual meeting. Following the opening paper, "A challenge for sustainability science: can we halt climate change?", a wide range of topics were discussed, including practices for sustainable transformation in the Erasmus University, practices in industry, energy transition and international cooperation.
Securing universal access to electricity by using renewable energy sources is technically feasible. A broad range of technological options, which can meet almost any requirements, are available. Solutions can comprise the connection of users to large distribution networks (on-grid solutions) or the application of power supply systems that can operate autonomously (off-grid and mini-grid solutions). This brochure concentrates on the latter solutions; technologies for large-scale distribution are not covered.
Nigeria is Africa's largest economy and home to approximately 10% of the un-electrified population of Sub-Saharan Africa. In 2017, 77 million Nigerians or 40% of the population had no access to affordable, reliable and sustainable electricity. In practice, diesel- and petrol-fuelled back-up generators supply the vast majority of electricity in the country. In Nigeria's nationally-determined contribution (NDC) under the Paris Agreement, over 60% of the greenhouse gas emissions (GHG) reductions are foreseen in the power sector. The goal of this study is to identify and critically examine the pathways available to Nigeria to meet its 2030 electricity access, renewables and decarbonization goals in the power sector. Using published data and stakeholder interviews, we build three potential scenarios for electrification and growth in demand, generation and transmission capacity. The demand assumptions incorporate existing knowledge on pathways for electrification via grid extension, mini-grids and solar home systems (SHS). The supply assumptions are built upon an evaluation of the investment pipeline for generation and transmission capacity, and possible scale-up rates up to 2030. The results reveal that, in the most ambitious Green Transition scenario, Nigeria meets its electricity access goals, whereby those connected to the grid achieve a Tier 3 level of access, and those served by sustainable off-grid solutions (mini-grids and SHS) achieve Tier 2. Decarbonization pledges would be surpassed in all three scenarios but renewable energy goals would only be partly met. Fossil fuel-based back-up generation continues to play a substantial role in all scenarios. The implications and critical uncertainties of these findings are extensively discussed.
New energy efficiency policies have been introduced around the world. Historically, most energy models were reasonably equipped to assess the impact of classical policies, such as a subsidy or change in taxation. However, these tools are often insufficient to assess the impact of alternative policy instruments. We evaluate the so-called engineering economic models used to assess future industrial energy use. Engineering economic models include the level of detail commonly needed to model the new types of policies considered. We explore approaches to improve the realism and policy relevance of engineering economic modeling frameworks. We also explore solutions to strengthen the policy usefulness of engineering economic analysis that can be built from a framework of multidisciplinary cooperation. The review discusses the main modeling approaches currently used and evaluates the weaknesses in current models. We focus on the needs to further improve the models. We identify research priorities for the modeling framework, technology representation in models, policy evaluation, and modeling of decision-making behavior.
Heating behavior of households is key for reducing domestic energy demand and mitigating climate change. Recently, various technical devices have been developed, providing households with feedback on their heating behavior and supporting energy conservation behavior.
The impact of such devices on overall energy consumption depends on (1) the impact of a device within a household, (2) the diffusion of devices to other households and the number of adopters, and (3) the diffusion of the induced behavioral change beyond these households. While the first two processes are currently established in assessments of sustainable household devices, we suggest that adding behavior diffusion is essential when assessing devices that explicitly target behavioral change. We therefore propose an assessment framework that includes all three processes. We implement this framework in an agent-based model by combining two existing simulation models to explore the effect of adding behavior diffusion. In three simulation experiments, we identify two mechanisms by which behavior diffusion (1) spreads the effect of such devices from adopters to non-adopters and (2) increases the average speed of behavioral change of households. From these results we conclude that behavior diffusion should be included in assessments of behavior-changing feedback devices.
The Greens / European Free Alliance Group of the European Parliament contracted Wuppertal Institute in collaboration with Energiaklub to develop scientifically sound, comprehensive, alternative, and sustainable long term energy scenarios for Hungary, which cover potential development paths till 2030 and 2050. The scenarios developed deliver information about the costs and long-term effects of different energy choices for Hungary as well as credible information on potential benefits of greening the energy mix. As a result, the study aims to provide policy makers with better evidence for making informed, prudent and forward-thinking decisions in this field.
Research on sustainability transitions has expanded rapidly in the last ten years, diversified in terms of topics and geographical applications, and deepened with respect to theories and methods. This article provides an extensive review and an updated research agenda for the field, classified into nine main themes: understanding transitions; power, agency and politics; governing transitions; civil society, culture and social movements; businesses and industries; transitions in practice and everyday life; geography of transitions; ethical aspects; and methodologies. The review shows that the scope of sustainability transitions research has broadened and connections to established disciplines have grown stronger. At the same time, we see that the grand challenges related to sustainability remain unsolved, calling for continued efforts and an acceleration of ongoing transitions. Transition studies can play a key role in this regard by creating new perspectives, approaches and understanding and helping to move society in the direction of sustainability.
The target of zero emissions sets a new standard for industry and industrial policy. Industrial policy in the twenty-first century must aim to achieve zero emissions in the energy and emissions intensive industries. Sectors such as steel, cement, and chemicals have so far largely been sheltered from the effects of climate policy. A major shift is needed, from contemporary industrial policy that mainly protects industry to policy strategies that transform the industry. For this purpose, we draw on a wide range of literatures including engineering, economics, policy, governance, and innovation studies to propose a comprehensive industrial policy framework. The policy framework relies on six pillars: directionality, knowledge creation and innovation, creating and reshaping markets, building capacity for governance and change, international coherence, and sensitivity to socio-economic implications of phase-outs. Complementary solutions relying on technological, organizational, and behavioural change must be pursued in parallel and throughout whole value chains. Current policy is limited to supporting mainly some options, e.g. energy efficiency and recycling, with some regions also adopting carbon pricing, although most often exempting the energy and emissions intensive industries. An extended range of options, such as demand management, materials efficiency, and electrification, must also be pursued to reach zero emissions. New policy research and evaluation approaches are needed to support and assess progress as these industries have hitherto largely been overlooked in domestic climate policy as well as international negotiations.
The European Union (EU) has established that the goal of achieving climate neutrality by 2050 as a key driver of innovation and growth for industry and the economy in the EU. In addition to offering great opportunities, this also poses considerable challenges for the European economy and, for the most part, for basic industries, which are particularly emission-intensive and face strong international competition.
An integrated climate and industry strategy is of central importance to protecting the climate, since the production of steel, cement, basic chemicals, glass, paper, and other materials in the EU and worldwide accounts for roughly one fifth of total greenhouse gas emissions. Even in a greenhouse gas-neutral future, we will not be able to fully eliminate our need for these materials. At the same time, it is particularly challenging to produce these materials without creating emissions given the state of technology and the necessary infrastructures. This applies above all to the question of how large amounts of green energy, including electricity and hydrogen, can be produced at competitive prices. Analyses show that despite the considerable costs involved in process changeover, the costs of transforming the raw materials industry are acceptable to society as a whole, given that the additional costs usually only increase the price of the end products by a few percentage points. However, in the case of crude steel or cement, the price would increase by between one third and 100 per cent. Since almost all raw materials manufacturers face strong global market competition, in most cases they are not able to bankroll the investments in climate-neutral production and the required energy infrastructure without outside support.
This paper outlines an integrated climate industrial policy package that allows the EU to utilise its existing technological leadership in many of these industries to build a greenhouse gas-neutral raw materials industry.
Roadmaps for India's energy future foresee that coal power will continue to play a considerable role until the middle of the 21st century. Among other options, carbon capture and storage (CCS) is being considered as a potential technology for decarbonising the power sector. Consequently, it is important to quantify the relative benefits and trade-offs of coal-CCS in comparison to its competing renewable power sources from multiple sustainability perspectives. In this paper, we assess coal-CCS pathways in India up to 2050 and compare coal-CCS with conventional coal, solar PV and wind power sources through an integrated assessment approach coupled with a nexus perspective (energy-cost-climate-water nexus). Our levelized costs assessment reveals that coal-CCS is expensive and significant cost reductions would be needed for CCS to compete in the Indian power market. In addition, although carbon pricing could make coal-CCS competitive in relation to conventional coal power plants, it cannot influence the lack of competitiveness of coal-CCS with respect to renewables. From a climate perspective, CCS can significantly reduce the life cycle GHG emissions of conventional coal power plants, but renewables are better positioned than coal-CCS if the goal is ambitious climate change mitigation. Our water footprint assessment reveals that coal-CCS consumes an enormous volume of water resources in comparison to conventional coal and, in particular, to renewables. To conclude, our findings highlight that coal-CCS not only suffers from typical new technology development related challenges - such as a lack of technical potential assessments and necessary support infrastructure, and high costs - but also from severe resource constraints (especially water) in an era of global warming and the competition from outperforming renewable power sources. Our study, therefore, adds a considerable level of techno-economic and environmental nexus specificity to the current debate about coal-based large-scale CCS and the low carbon energy transition in emerging and developing economies in the Global South.
Direct air capture (DAC) combined with subsequent storage (DACCS) is discussed as one promising carbon dioxide removal option. The aim of this paper is to analyse and comparatively classify the resource consumption (land use, renewable energy and water) and costs of possible DAC implementation pathways for Germany. The paths are based on a selected, existing climate neutrality scenario that requires the removal of 20 Mt of carbon dioxide (CO2) per year by DACCS from 2045. The analysis focuses on the so-called "low-temperature" DAC process, which might be more advantageous for Germany than the "high-temperature" one. In four case studies, we examine potential sites in northern, central and southern Germany, thereby using the most suitable renewable energies for electricity and heat generation. We show that the deployment of DAC results in large-scale land use and high energy needs. The land use in the range of 167-353 km2 results mainly from the area required for renewable energy generation. The total electrical energy demand of 14.4 TWh per year, of which 46% is needed to operate heat pumps to supply the heat demand of the DAC process, corresponds to around 1.4% of Germany's envisaged electricity demand in 2045. 20 Mt of water are provided yearly, corresponding to 40% of the city of Cologne's water demand (1.1 million inhabitants). The capture of CO2 (DAC) incurs levelised costs of 125-138 EUR per tonne of CO2, whereby the provision of the required energy via photovoltaics in southern Germany represents the lowest value of the four case studies. This does not include the costs associated with balancing its volatility. Taking into account transporting the CO2 via pipeline to the port of Wilhelmshaven, followed by transporting and sequestering the CO2 in geological storage sites in the Norwegian North Sea (DACCS), the levelised costs increase to 161-176 EUR/tCO2. Due to the longer transport distances from southern and central Germany, a northern German site using wind turbines would be the most favourable.
Jordan's electricity system has and continues to experience considerable pressures for reform due to continuous increase of electricity demand combined with high dependency on imported fossil fuels and a partially subsidised electricity market. In this paper we use the transitions pathways to examine and analyse pressures on the regime in relation to plausible future developments of particular niches such as renewable energy technologies. Our analysis is methodologically distinct in that we explicitly identify mechanisms operating in the system and relate those to existing scenarios to assess future developments. Currently, we see future developments being sensitive to the actions of key regime actors.
The cement industry is one of the major energy consuming and CO2 emitting sectors in China. In 2010, 1,868 million tons of cement has been produced, which accounted for 56.1% of the world's total cement production. The 11th Five-Year Plan (FYP) (2006-2010) included policy measures for CO2 emission abatement in cement production. Based on the main governmental framework of CO2 mitigation policies at national level in the cement sector, key policies and technologies used during this period are identified and their effects on CO2 reduction are assessed. This paper calculates the reduction of CO2 emissions related to four main policies and technologies for efficient cement production in the 11th and the 12th FYP (2011-2015) with 2005 as a reference year. These are waste heat recovery, closing outdated facilities, substitution for clinker production and other technologies aiming to increase energy efficiency. Due to these measures, we estimate that a total CO2 emission reduction during the 11th FYP of 397 million tonnes could be saved, which is considerably different to 185.75 million tonnes estimated by Zeng (2008) and 303 million tonnes by the NDRC by using different calculation methods. Of the four technologies, the 4th group of energy efficiency increasing techniques was the most important policy and avoided the largest amount of CO2 emissions. Previous energy intensity reduction was mainly due to the outdated production closing and energy efficiency improving. Based on the assessment of technology performance, it appears that there is still a large emission reduction potential in cement production processes. The paper calculates this potential for the 12th FYP period (2011-2015) based on these four identified policy measures. The result is compared to the Chinese government targets in the 12th FYP and promising future CO2 mitigation policies and technologies are proposed, such as the use of alternative energy.
Analysis of the historical structural change in the German hard coal mining Ruhr area (case study)
(2022)
This case study examined the structural change in the Ruhr area caused by the low international competitiveness of German hard coal mining over the period from the late 1950s to 2015. It analysed the structural change process and the structural policies implemented as a reaction to this process with the objective to make this knowledge available for future structural change processes in other (coal) regions by deploying various qualitative and quantitative methods of empirical social and economic research. A discourse analysis helped to recognise who supported which structural policy approaches and why - and thus gives indications of the possible relevance of experiences for other regions.
This case study examined the structural change in Lusatia caused by the system change from a centrally planned economy to a market economy in the period 1990-2015. It analysed the structural change process and the structural policies implemented as a reaction to this process with the objective to make this knowledge available for future structural change processes in other (coal) regions by deploying various qualitative and quantitative methods of empirical social and economic research. A discourse analysis helped to recognise who supported which structural policy approaches and why - and thus gives indications of the possible relevance of experiences for other regions.
The German government has set itself the target of reducing the country's GHG emissions by between 80 and 95% by 2050 compared to 1990 levels. Alongside energy efficiency, renewable energy sources are set to play the main role in this transition. However, the large-scale deployment of renewable energies is expected to cause increased demand for critical mineral resources. The aim of this article is therefore to determine whether the transformation of the German energy system by 2050 ("Energiewende") may possibly be restricted by a lack of critical minerals, focusing primarily on the power sector (generating, transporting and storing electricity from renewable sources). For the relevant technologies, we create roadmaps describing a number of conceivable quantitative market developments in Germany. Estimating the current and future specific material demand of the options selected and projecting them along a range of long-term energy scenarios allows us to assess potential medium- or long-term mineral resource restrictions. The main conclusion we draw is that the shift towards an energy system based on renewable sources that is currently being pursued is principally compatible with the geological availability and supply of mineral resources. In fact, we identified certain sub-technologies as being critical with regard to potential supply risks, owing to dependencies on a small number of supplier countries and competing uses. These sub-technologies are certain wind power plants requiring neodymium and dysprosium, thin-film CIGS photovoltaic cells using indium and selenium, and large-scale redox flow batteries using vanadium. However, non-critical alternatives to these technologies do indeed exist. The likelihood of supplies being restricted can be decreased further by cooperating even more closely with companies in the supplier countries and their governments, and by establishing greater resource efficiency and recyclability as key elements of technology development.
CCS is discussed in a broad sense throughout Europe. In this paper a cautious, conservative estimate of CO2 storage capacity for Germany and its neighbouring countries where CO2 emissions from Germany could possibly be stored (Netherlands, France, Denmark, Norway, UK and Poland) is presented. Such a lower limit calculation is necessary for orientation purposes for potential investors and political decision-makers.
Conservative CO2 sequestration capacity in deep saline aquifers for Germany is derived by the volumetric approach where parameters such as efficiency factor, CO2 density, porosity of the geological formation are of interest. It is assumed that every geological system is closed and thus an efficiency factor of 0.1 per cent (based on maximum pressure increase and total compressibility) for saline aquifers is applied. The capacity of German depleted oil and gas fields is based on cumulative recovery data and a sweep efficiency of 75 per cent. The storage capacity in the other considered countries, adjacent to Germany, are based on a critical review and adjustment of the results of the European reports JOULE II, GESTCO and GeoCapacity.
The conservative capacities for all countries together amount to 49 Gt CO2, from which Norway and the UK provide 36 Gt, all offshore in the North Sea. Compared to the emissions from large point sources in these countries during 40 years (47.6 Gt of CO2), a virtual balance is achieved. This can only be reached, if a large scale CO2 pipeline system is installed to connect these countries, especially Germany, to the large sinks in the North Sea. If additional restrictions like source-sink matching, acceptance issues and injection rates constraints are taken into account, the available storage space gets increasingly scarce.
On 26 January 2019, the Commission on Growth, Structural Change and Employment recommended that no more coal-fired power plants would be operated in Germany by 2038 at the latest. In this paper the Wuppertal Institute comments on the results of the Commission and makes recommendations for the current necessary steps for the climate and innovation policy in Europe, Germany and North Rhine-Westphalia.
Simulation modeling is useful to understand the mechanisms of the diffusion of innovations, which can be used for forecasting the future of innovations. This study aims to make the identification of such mechanisms less costly in time and labor. We present an approach that automates the generation of diffusion models by: (1) preprocessing of empirical data on the diffusion of a specific innovation, taken out by the user; (2) testing variations of agent-based models for their capability of explaining the data; (3) assessing interventions for their potential to influence the spreading of the innovation. We present a working software implementation of this procedure and apply it to the diffusion of water-saving showerheads. The presented procedure successfully generated simulation models that explained diffusion data. This progresses agent-based modeling methodologically by enabling detailed modeling at relative simplicity for users. This widens the circle of persons that can use simulation to shape innovation.
Only three days after the beginning of the nuclear catastrophe in Fukushima, Japan, on 11 March 2011, the German government ordered 8 of the country's 17 existing nuclear power plants (NPPs) to stop operating within a few days. In summer 2011 the government put forward a law - passed in parliament by a large majority - that calls for a complete nuclear phase-out by the end of 2022. These government actions were in contrast to its initial plans, laid out in fall 2010, to expand the lifetimes of the country's NPPs.
The immediate closure of 8 NPPs and the plans for a complete nuclear phase-out within little more than a decade, raised concerns about Germany's ability to secure a stable supply of electricity. Some observers feared power supply shortages, increasing CO2-emissions and a need for Germany to become a net importer of electricity.
Now - a little more than a year after the phase-out law entered into force - this paper examines these concerns using (a) recent statistical data on electricity production and demand in the first 15 months after the German government's immediate reaction to the Fukushima accident and (b) reviews the most recent projections and scenarios by different stakeholders on how the German electricity system may develop until 2025, when NPPs will no longer be in operation.
The paper finds that Germany has a realistic chance of fully replacing nuclear power with additional renewable electricity generation on an annual basis by 2025 or earlier, provided that several related challenges, e.g. expansion of the grids and provision of balancing power, can be solved successfully. Already in 2012 additional electricity generation from renewable energy sources in combination with a reduced domestic demand for electricity will likely fully compensate for the reduced power generation from the NPPs shut down in March 2011.
If current political targets will be realised, Germany neither has to become a net electricity importer, nor will be unable to gradually reduce fossil fuel generated electricity. Whether the reduction in fossil fuel use will be sufficient to adequately contribute to national greenhouse gas mitigation targets significantly depends on an active policy to promote electricity savings, continuous efforts to increase the use of renewables and a higher share of natural gas (preferably used in combined heat and power plants) in fossil fuel power generation.
Water is a basis for life and ecosystem health. And water, especially in regions affected by water scarcity, is a highly contested and politicised natural resource. The state-of-the-art in sustainable water resources management requires collaborative approaches that foster the integration of conflicting interests of multiple stakeholders. Achieving integration in complex and contested real life situations however remains a major challenge. Boundary work can facilitate this ambitious goal. This study evolves boundary work science to improve collaboration in the water sector. It develops a framework for boundary work that enables understanding, structuring and approaching barriers for collaborative water resources management. A case study from the Garden Route region, South Africa gives a grounded basis for the conceptual developments and further provides in-depth insights into reasons and obstacles for collaborative water resources management in a contested local case. The case study serves both: An intrinsic analysis of a conflictive case, and conceptual developments to the boundary work framework - tested against local realities.
The basic materials industries are a cornerstone of Europe's economic prosperity, increasing gross value added and providing around 2 million high-quality jobs. But they are also a major source of greenhouse gas emissions. Despite efficiency improvements, emissions from these industries were mostly constant for several years prior to the Covid-19 crisis and today account for 20 per cent of the EU's total greenhouse gas emissions.
A central question is therefore: How can the basic material industries in the EU become climate-neutral by 2050 while maintaining a strong position in a highly competitive global market? And how can these industries help the EU reach the higher 2030 climate target - a reduction of greenhouse gas emissions of at least 55 per cent relative to 1990 levels?
In the EU policy debate on the European Green Deal, many suppose that the basic materials industries can do little to achieve deep cuts in emissions by 2030. Beyond improvements to the efficiency of existing technologies, they assume that no further innovations will be feasible within that period. This study takes a different view. It shows that a more ambitious approach involving the early implementation of key low-carbon technologies and a Clean Industry Package is not just possible, but in fact necessary to safeguard global competitiveness.
Bridging the data gap
(2004)
There is an increasing pressure that enhanced and novel energy technologies are swiftly adopted by the market to ensure meeting the energy and climate targets. An important issue with such novel developments is their risk to be stuck in the "valley of death", i.e. that their transition to the market is delayed or unsuccessful. Publicly supported demonstration projects could help to bridge the valley of death by reducing barriers to the adoption caused by missing information and perceived risks. A challenge for technology demonstrations in the industrial context is their often high investments that are required to prove their real-world benefits. Given the magnitude of such investments, it becomes crucial that public funding focuses on the most promising demonstration proposals. Structured evaluation processes can help to facilitate the identification of promising proposals and to improve the quality and transparency of decisions. This paper deals with a corresponding multi-staged multi-criteria decision support system (DSS) suggested to the German Federal Ministry for Economic Affairs and Energy. It deals with the evaluation of demonstration proposals across three stages: The first stage represents a filtering stage to identify those proposals relevant for further considerations. The second stage comprises a multi-criteria scoring method drawing on an evaluation against nineteen criteria. The final third stage serves to critically review the need for public funding of well-scored proposals. This contribution outlines the development of the DSS and its design and thus provides insights on proposal evaluating in energy research.
The present brief analysis provides an overview about costs and benefits of the promotion of renewable energies in the framework of the EEG. We describe the development of the EEG apportionment in recent years, and its possible development in coming years. Furthermore, the analysis examines the merits of some of the most commonly expressed points of criticism against the EEG. Finally, we examine the extent to which the calculations regarding the costs of the expansion of photovoltaics, which are often raised in the media, are correct, and how they are to be interpreted.
Sufficiency measures are potentially decisive for the decarbonisation of energy systems but rarely considered in energy policy and modelling. Just as efficiency and renewable energies, the diffusion of demand-side solutions to climate change also relies on policy-making. Our extensive literature review of European and national sufficiency policies fills a gap in existing databases. We present almost 300 policy instruments clustered into relevant categories and publish them as "Energy Sufficiency Policy Database". This paper provides a description of the data clustering, the set-up of the database and an analysis of the policy instruments. A key insight is that sufficiency policy includes much more than bans of products or information tools leaving the responsibility to individuals. It is a comprehensive instrument mix of all policy types, not only enabling sufficiency action, but also reducing currently existing barriers. A policy database can serve as a good starting point for policy recommendations and modelling, further research is needed on barriers and demand-reduction potentials of sufficiency policy instruments.
Nigeria is Africa's top cement producer and could be on course to be one of the top producers globally. The goal of this study is to identify and critically examine the pathways available to Nigeria to meet its decarbonisation goals in the cement sector. Based on a literature review, the study assesses demand drivers and decarbonisation potentials for the sector. It then presents two different quantitative pathways for growth in production of cement by 2050, and three different pathways for decarbonisation of the sector. Using published data and a scenario analysis tool, the study calculates how the sector's emissions might evolve under each of these pathways. The results indicate that, in the most ambitious scenario, emissions from the sector can plateau by the late 2030s, resulting in an overall increase of 21% by 2050 (compared to 2015 levels). Achieving this scenario is necessary in order to put the sector on a path to net zero emissions beyond 2050. The scenario is driven by reductions in both energy-related and process emissions, as well as a small share of carbon capture and storage and demand management. A moderately ambitious scenario that relies mostly on savings on energy-related emissions results in an 84% increase in emissions by 2050. Finally, the Business-as-Usual scenario results in an almost tripling of emissions by 2050. The results indicate a strong potential for policies to drive improvements in energy efficiency and clinker-to-cement ratio. Critical areas of uncertainty within the assumptions include the production rates (including the evolution of the export market) and the fuel mix.
Carbon capture and storage
(2009)
Carbon markets in a <2 °C world : will there be room for international carbon trading in 2050?
(2016)
This JIKO Policy Paper analyses a series of very ambitious mitigation scenarios and complements this analysis with a review of several sectoral technology roadmaps. The results are quite clear: there is no reason to believe that international carbon trading will become obsolete any time soon. Whether or not international carbon trading is to play a role in international climate protection efforts is in the end not a physical or economic question, but a political one.
Case study on the German discourse of industry decarbonisation : a discourse network analysis
(2023)
The adoption of the Paris Agreement in 2015 and the passing of the Climate Action Law in Germany in 2019 established the legal need for the basic material industry in Germany to decarbonise. For the industry sector, the target is sets at a 49-51% GHG reduction by 2030 compared to 1990. Even though the sector specific targets are likely to become obsolete, a Hydrogen Strategy, Industry Strategy and Climate Protection Contracts are currently being developed or elaborated on. These are to further ensure and enable the basic material industry in Germany to decarbonise. These developments are emphasising the relevance of studying the industry decarbonisation at the time of conducting this research.
As the institutionalisation of the industry decarbonisation is influenced by discourse, the analysis of the discourse is an important tool for studying the power effects produced by and built into the discourse. This is the first research aiming to provide a structured analysis of the discourse on industry decarbonisation in Germany. Drawing on discourse analysis and the Multilevel-Perspectives framework, this research investigated the power and dominance of storylines to influence the discourse of the industry transformation towards decarbonisation. In this research insights were obtained into the storylines used in this discourse, the actors who are part of this discourse, the frequency of storylines used and the percentage of actors making use of these storylines. Additionally, insights were generated into the discursive network and potential coalitions.
This research made use of the Discourse Network Analysis software in combination with Visone and Excel for data collection, analysis, and visualisation. Based on 117 documents of various categories from the years 2012 to 2023, the discourse on German industry decarbonisation is discovered to be dominated by storylines of mainly technological or economic nature. The general sentiment discovered by the different actors is positive with the storylines focusing on establishing the conditions for the industry to decarbonise and no resistance being communicated. The discourse is furthermore dominated by most storylines. 18 out of 27 storylines are being used by more than 56% of all actors. The high overlap in storyline indicates discursive homogeneity. The homogeneity is further indicated through the lack of emerging discourse coalitions and the therewith connected lack of struggles for discursive dominance. One coalition can be defined with some actors being deeper involved and some being less involved in the discourse.
As decisions on the transition path for Germany's industry to decarbonise are still to be taken the lack of discursive struggles has come to my surprise. In the discussion I reflect on how the positive sentiment, the discursive homogeneity and the great number of dominant storylines may come about.
Today more than 45 % of all energy-related CO2 emissions come from burning coal. Thus, reducing CO2 emissions from coal use is a necessity for reaching the targets of the Paris Agreement. This will not only pose challenges for coal consumers (restructuring of the energy system), but also for countries whose economy is strongly depending on the production of coal. This paper examines the role of coal in three countries, which are or were in recent years among the top coal exporters: Indonesia, Colombia and Vietnam. Understanding challenges and possible transition pathways in these countries will help to develop global strategies to reduce CO2 emissions from coal in the short to mid-term.
Due to significant success in technology development and cost reductions, the electricity system is now widely perceived as the part of the energy system to be first in decarbonisation. This means a double challenge for the system: Firstly, it will undergo significant change due to rapidly increasing shares of fluctuating renewable generation; Secondly, there will be an expansion of electricity into other fields of the energy system such as heat generation and transport.
There is a growing body of scientific evidence supporting sufficiency as an inevitable strategy for mitigating climate change. Despite this, sufficiency plays a minor role in existing climate and energy policies. Following previous work on the National Energy and Climate Plans of EU countries, we conduct a similar content analysis of the recommendations made by citizen assemblies on climate change mitigation in ten European countries and the EU, and compare the results of these studies. Citizen assemblies are representative mini-publics and enjoy a high level of legitimacy.
We identify a total of 860 mitigation policy recommendations in the citizen assemblies' documents, of which 332 (39 %) include sufficiency. Most of the sufficiency policies relate to the mobility sector, the least relate to the buildings sector. Regulatory instruments are the most often proposed means for achieving sufficiency, followed by fiscal and economic instruments. The average approval rate of sufficiency policies is high (93 %), with the highest rates for regulatory policies.
Compared to National Energy and Climate Plans, the citizen assembly recommendations include a significantly higher share of sufficiency policies (factor three to six) with a stronger focus on regulatory policies. Consequently, the recommendations can be interpreted as a call for a sufficiency turn and a regulatory turn in climate mitigation politics. These results suggest that the observed lack of sufficiency in climate policy making is not due to a lack of legitimacy, but rather reflects a reluctance to implement sufficiency policies, the constitution of the policy making process and competing interests.
The 2011 Japanese earthquake and tsunami, and the consequent accident at the Fukushima nuclear power plant, have had consequences far beyond Japan itself. Reactions to the accident in three major economies Japan, the UK, and Germany, all of whom were committed to relatively ambitious climate change targets prior to the accident are examined. In Japan and Germany, the accident precipitated a major change of policy direction. In the UK, debate has been muted and there has been essentially no change in energy or climate change policies. The status of the energy and climate change policies in each country prior to the accident is assessed, the responses to the accident are described, and the possible impacts on their positions in the international climate negotiations are analysed. Finally, the three countries' responses are compared and some differences between them observed. Some reasons for their different policy responses are suggested and some themes, common across all countries, are identified. Policy relevance: The attraction of nuclear power has rested on the promise of low-cost electricity, low-carbon energy supply, and enhanced energy independence. The Fukushima accident, which followed the Japanese tsunami of March 2011, has prompted a critical re-appraisal of nuclear power. The responses to Fukushima are assessed for the UK, Germany, and Japan. Before the accident, all three countries considered nuclear as playing a significant part in climate mitigation strategies. Although the UK Government has continued to support nuclear new build following a prompt review of safety arrangements, Japan and Germany have decided to phase out nuclear power, albeit according to different timescales. The factors that explain the different decisions are examined, including patterns of energy demand and supply, the wider political context, institutional arrangements, and public attitudes to risk. The implications for the international climate negotiations are also assessed.
The CO2 utilisation is discussed as one of the future low-carbon technologies in order to accomplish a full decarbonisation in the energy intensive industry. CO2 is separated from the flue gas stream of power plants or industrial plants and is prepared for further processing as raw material. CO2 containing gas streams from industrial processes exhibit a higher concentration of CO2 than flue gases from power plants; consequentially, industrial CO2 sources are used as raw material for the chemical industry and for the synthesis of fuel on the output side. Additionally, fossil resources can be replaced by substitutes of reused CO2 on the input side. If set up in a right way, this step into a CO2-based circular flow economy could make a contribution to the decarbonisation of the industrial sector and according to the adjusted potential, even rudimentarily to the energy sector.
In this study, the authors analyse potential CO2 sources, the potential demand and the range of applications of CO2. In the last chapter of the final report, they give recommendations for research, development, politics and economics for an appropriate future designing of CO2 utilisation options based upon their previous analysis.
CO2-capture and geological storage as a climate policy option : technologies, concepts, perspectives
(2007)
The idea of removing carbon dioxide from flue gas and industrial gas flows and putting it into suitable long-term storage sites is referred to as Carbon Capture and Storage (CCS). This publication provides a close look at this new line of technologies, describing its current status and outlining the prospects for development. The approach is both diagnostic and analytical, identifying the questions a technology assessment poses and showing the steps that need to be taken to implement CCS.
CCS is currently moving to the centre of climate policy discussion. Nonetheless this line of technologies is still the subject of controversial discussion. On the one hand there is a clear hope that these technologies will open up opportunities to use fossil fuels without harming the climate and thus make it possible to continue using oil, natural gas and above all coal even under a stricter climate regime. Accordingly, numerous R&D projects have been initiated all over the world, and various demonstration projects are at the planning or implementation stage. On the other hand, CCS (especially the storage part) has given rise to considerable scepticism from an ecological point of view.
Several countries with large coal deposits but limited domestic oil reserves show high interest in coal-to-liquid (CtL) technologies, which could reduce crude oil imports by converting coal into liquid hydrocarbon fuels. After decades of successful large-scale operating experiences in South Africa, CtL activities in the United States, China and Germany have been fanned by the high oil price in the last years. However, CtL indicates negative techno-economic and resource-related features, such as high capital costs, high greenhouse gas discharges and high water consumption. Therefore, the technology's diffusion strongly depends on a favourable framework of policies and strong technology advocates. Daniel Vallentin analyses interdependencies between technical and non-technical parameters affecting the diffusion of CtL technologies in the United States, China and Germany. Applying the inter-disciplinary technological system approach, he identifies factors which determine the market prospects of CtL in these countries, including costs, the geographic distribution of coal reserves, actor constellations and technology, energy and climate policies. At the end of his study, he derives general conclusions with regard to driving forces and barriers for CtL diffusion. As the investigated countries are major consumers of energy and belong to the world's largest emitters of greenhouse gases, their strategies in substituting crude oil based fuels are of utmost global relevance. Therefore, Vallentin's study is recommended to experts, planners, decision-makers, and politicians in the field of climate and resource protection.
For the option of “carbon capture and storage”, an integrated assessment in the form of a life cycle analysis and a cost assessment combined with a systematic comparison with renewable energies regarding future conditions in the power plant market for the situation in Germany is done. The calculations along the whole process chain show that CCS technologies emit per kWh more than generally assumed in clean-coal concepts (total CO2 reduction by 72-90% and total greenhouse gas reduction by 65-79%) and considerable more if compared with renewable electricity. Nevertheless, CCS could lead to a significant absolute reduction of GHG-emissions within the electricity supply system. Furthermore, depending on the growth rates and the market development, renewables could develop faster and could be in the long term cheaper than CCS based plants. Especially, in Germany, CCS as a climate protection option is phasing a specific problem as a huge amount of fossil power plant has to be substituted in the next 15 years where CCS technologies might be not yet available. For a considerable contribution of CCS to climate protection, the energy structure in Germany requires the integration of capture ready plants into the current renewal programs. If CCS retrofit technologies could be applied at least from 2020, this would strongly decrease the expected CO2 emissions and would give a chance to reach the climate protection goal of minus 80% including the renewed fossil-fired power plants.
In order to ensure security of supply in a future energy system with a high share of volatile electricity generation, flexibility technologies are needed. Industrial demand-side management ranks as one of the most efficient flexibility options. This paper analyses the effect of the integration of industrial demand-side management through the flexibilisation of aluminium electrolysis and other flexibilities of the electricity system and adjacent sectors. The additional flexibility options include electricity storage, heat storage in district heating networks, controlled charging of electric vehicles, and buffer storage in hydrogen electrolysis. The utilisation of the flexibilities is modelled in different settings with an increasing share of renewable energies, applying a dispatch model. This paper compares which contributions the different flexibilities can make to emission reduction, avoidance of curtailment, and reduction of fuel and CO2 costs, and which circumstances contribute to a decrease or increase of overall emissions with additional flexibilities. The analysis stresses the rising importance of flexibilities in an energy system based on increasing shares of renewable electricity generation, and shows that flexibilities are generally suited to reduce carbon emissions. It is presented that the relative contribution towards the reduction of curtailment and costs of flexibilisation of aluminium electrolysis are high, whereby the absolute effect is small compared to the other options due to the limited number of available processes.
Urban areas, being responsible for large shares of global greenhouse gas emissions, are important arenas for achieving global decarbonisation. However, the systemic challenge of decarbonisation requires deep structural changes - transitions - that take place across multiple scales and along entire value chains. We argue in this article that understanding the role of urban areas for global decarbonisation therefore requires consideration of their context and analysis of urban areas' contributions to transitions that extend past the individual urban area. We develop an analytical framework that proposes three principal ways urban areas contribute to low-carbon transitions and ten competences that regional and local governance actors have to support them. We apply this framework to the Cologne metropolitan area in Germany to demonstrate the ability of our framework to relate urban-scale activities to more encompassing low-carbon transitions. The paper concludes with future research possibilities.
Especially in the arid areas of the Middle East and North Africa (MENA), water availability plays an important role in the expansion planning of industrial-scale solar power plants. Although power plants may account for only a very small portion of local water demand, competition for water with other sectors is expected to increase when water resources are insufficient for meeting local needs. This can lead to conflicts between different users (such as communities, farmers, tourism, businesses and utilities). Despite the increasing attention on the water-energy nexus, comprehensive studies analysing the interdependencies and potential conflicts between energy and water at the local level are absent.
To examine the linkages between water resources and energy technologies at the local level, this case study was selected because Morocco is one of the countries most affected by water scarcity and, at the same time, it is also one of the most promising countries in North Africa for the development of renewable energies and offers excellent conditions for solar and wind power plants. Nevertheless, the country's electricity system is still largely based on conventional energy sources, and the country is more than 95% dependent on energy imports. To strengthen the country's energy security and reduce the financial burden associated with energy imports, Morocco is pursuing an ambitious renewable energy expansion strategy: by 2020, around 42% of the national electricity demand should be met by renewable energies. In view of Morocco's ambitious plans, it is particularly important to identify the potential conflicts and synergies resulting from the expansion of renewable energies in relation to the water sector.
In recent decades, better data and methods have become available for understanding the complex functioning of cities and their impacts on sustainability. This review synthesizes the recent developments in concepts and methods being used to measure the impacts of cities on environmental sustainability. It differentiates between a dominant trend in research literature that concentrates on the accounting and allocation of greenhouse gas emissions and energy use to cities and a reemergence of studies that focus on the direct and indirect material and resource flows in cities. The methodological approaches reviewed may consider cities as either producers or consumers, and all recognize that urban environmental impacts can be local, regional, or global. As well as giving an overview of the methodological debates, we examine the implications of the different approaches for policy and the challenges these approaches face in their application on the field.
The German federal state of North Rhine-Westphalia (NRW) is home to important clusters of energy-intensive basic materials industries. 15% of the EU's primary steel as well as 15% of high-value base chemicals are produced here. Together with refinery fuels, cement, lime and paper production (also overrepresented in NRW) these are the most carbon-intensive production processes of the industrial metabolism. To achieve the ambitious regional and national climate goals without relocating these clusters, carbon-neutral production will have to become standard by mid-century. We develop and evaluate three conceptual long-term scenarios towards carbon-neutral industry systems for NRW for 2050 and beyond:
* a first scenario depending on carbon capture and storage or use for heavy industries (iCCS),
* a second scenario sketching the direct electrification of industrial processes (and transport) and
* a third scenario relying on the import of low carbon energies (e.g. biomass, and synthetic fuels (like methanol) for the use in industries and transport. All scenarios share the assumption that electricity generation will be CO2-neutral by 2050.
For all three scenarios energy efficiency, primary energy demand for energy services and feedstock as well as the carbon balance are quantified. We apply a spatial-explicit analysis of production sites to allow for discussion of infrastructure re-use and net investment needs. Possible symbiotic relations between sectors are also included. The robustness of the three conceptualised future carbon-neutral industry systems is then analysed using a multi-criteria approach, including e.g. energy security issues and lock-ins on the way to 2050.
This report was prepared by the Wuppertal Institute in cooperation with the German Economic Institute as part of the SCI4climate.NRW project. The report aims to shed light on the possible phenomenon that the availability and costs of "green" energy sources may become a relevant location factor for basic materials produced in a climate-neutral manner in the future.
For this purpose, we introduce the term "Renewables Pull". We define Renewables Pull as the initially hypothetical phenomenon of a shift of industrial production from one region to another as a result of different marginal costs of renewable energies (or of secondary energy sources or feedstocks based on renewable energies).
Shifts in industrial production in the sense of Renewables Pull can in principle be caused by differences in the stringency of climate policies in different countries, as in the case of Carbon Leakage. Unlike Carbon Leakage, however, Renewables Pull can also occur if similarly ambitious climate policies are implemented in different countries. This is because Renewables Pull is primarily determined by differences in the costs and availability of renewable energies. In addition, Renewables Pull can also be triggered by cost reductions of renewable energies and by changing preferences on the demand side towards climate-friendly products. Another important difference to Carbon Leakage is that the Renewables Pull effect does not necessarily counteract climate policy.
Similar to Carbon Leakage, it is to be expected that Renewables Pull could become relevant primarily for very energy-intensive products in basic materials industries. In these sectors (e.g. in the steel or chemical industry), there is also the possibility that relocations of specific energy-intensive parts of the production process could trigger domino effects. As a result, large parts of the value chains previously existing in a country or region could also be subjected to an (indirect) Renewables Pull effect.
For the federal state of NRW, in which the basic materials industry plays an important role, the possible emergence of Renewables Pull is associated with significant challenges as climate policy in Germany, the EU and also worldwide is expected to become more ambitious in the future.
This report aims to enable and initiate a deeper analysis of the potential future developments and challenges associated with the Renewables Pull effect. Thus, in the final chapter of the report, several research questions are formulated that can be answered in the further course of the SCI4climate.NRW project as well as in other research projects.
Will climate change stay below the 2 degree target in the 21st century on the basis of the COP 21 results? Looking into challenges and opportunities, this paper answers: To stay below the global 2dt is neither a real choice for the world society nor for businesses and civil societies in specific countries. It is a global guideline, scientifically developed for global negotiations, which should be broken down to national interests and actors. Key questions concerning the energy sector from the perspective of national interests are how to create and sustain a momentum for the inevitable energy transition, how to encourage disruptive innovations, avoid lock in effects, enable rapid deployment of energy efficiency and renewable energies etc. Or in other words: how to get to a competitive, economically benign, inclusive, low carbon and risk minimising energy system. With this background the paper argues that "burden sharing" is a misleading perception of strong climate mitigation strategies. It is more realistic to talk about "benefit sharing", using the monetary benefits and co-benefits of climate mitigation (e.g. energy cost savings, revenues from CO2-tax or emission trading systems) to help vulnerable national and international actors to adapt to the unavoidable climate risks. It has to be demonstrated on country level that the technologies and policy mix of strong climate mitigation and risk-minimising actions are indeed "benefit sharing" strategies which should be chosen anyhow, even if there was no climate change. For China and Germany this paper includes basic findings supporting this view.
Corporate energy and material efficiency ... makes good business sense : WISIONS of sustainability
(2006)
In this brochure, WISIONS focuses on corporate strategies for improving energy and material efficiency. WISIONS presents projects from Slovakia, Germany, the UK and Peru that have been successfully implemented, with the intention of further promoting the particular approaches used by these projects. Using a key number of internationally accepted criteria, the main consideration for the selection of the projects was energy and resource efficiency, but social aspects were also of relevance. The assessment of the projects also included the consideration of regional factors acknowledging different needs and potentials.
Technological breakthroughs and policy measures targeting energy efficiency and clean energy alone will not suffice to deliver Paris Agreement-compliant greenhouse gas emissions trajectories in the next decades. Strong cases have recently been made for acknowledging the decarbonisation potential lying in transforming linear economic models into closed-loop industrial ecosystems and in shifting lifestyle patterns towards this direction. This perspective highlights the research capacity needed to inform on the role and potential of the circular economy for climate change mitigation and to enhance the scientific capabilities to quantitatively explore their synergies and trade-offs. This begins with establishing conceptual and methodological bridges amongst the relevant and currently fragmented research communities, thereby allowing an interdisciplinary integration and assessment of circularity, decarbonisation, and sustainable development. Following similar calls for science in support of climate action, a transdisciplinary scientific agenda is needed to co-create the goals and scientific processes underpinning the transition pathways towards a circular, net-zero economy with representatives from policy, industry, and civil society. Here, it is argued that such integration of disciplines, methods, and communities can then lead to new and/or structurally enhanced quantitative systems models that better represent critical industrial value chains, consumption patterns, and mitigation technologies. This will be a crucial advancement towards assessing the material implications of, and the contribution of enhanced circularity performance to, mitigation pathways that are compatible with the temperature goals of the Paris Agreement and the transition to a circular economy.
The need for deep decarbonisation in the energy intensive basic materials industry is increasingly recognised. In light of the vast future potential for renewable electricity the implications of electrifying the production of basic materials in the European Union is explored in a what-if thought-experiment. Production of steel, cement, glass, lime, petrochemicals, chlorine and ammonia required 125 TW-hours of electricity and 851 TW-hours of fossil fuels for energetic purposes and 671 TW-hours of fossil fuels as feedstock in 2010. The resulting carbon dioxide emissions were equivalent to 9% of total greenhouse gas emissions in EU28. A complete shift of the energy demand as well as the resource base of feedstocks to electricity would result in an electricity demand of 1713 TW-hours about 1200 TW-hours of which would be for producing hydrogen and hydrocarbons for feedstock and energy purposes. With increased material efficiency and some share of bio-based materials and biofuels the electricity demand can be much lower. Our analysis suggest that electrification of basic materials production is technically possible but could have major implications on how the industry and the electric systems interact. It also entails substantial changes in relative prices for electricity and hydrocarbon fuels.
Germany's current efforts to decarbonize its electricity system are analysed. As nuclear power and fossil power plants equipped with carbon capture and storage were ruled out in 2011, renewable electricity generation (RES) together with electricity savings are the primary focus for achieving decarbonization. Germany aims to have RES account for at least 80% of its electricity by 2050. Achieving renewable generation needs strong political support and regulatory provisions for its market integration. Four main technical and regulatory challenges are the maintenance of a steady and efficient expansion of RES, the provision of balancing capacities, the realization of the targeted electricity savings, and the smart adaptation of the transport and distribution grid. An overview of the existing and planned regulatory provisions for decarbonization are described, and some gaps identified, particularly with regard to the overall management of the process, the inclusion of electricity savings and the interference of Germany's decarbonization strategies with neighbouring countries. Policies that both accelerate grid expansion and direct RES expansion should immediately be put in place and can be supported by a targeted mobilization of balancing capacities. Electricity savings are a significant and cost-efficient strategy for low-carbon electricity. Policy relevance: Germany is actively converting its national electricity system towards a fully renewable one. As renewable electricity has reached about a quarter of total consumption, a number of technical and regulatory challenges arise. Current discussions and plans are described for the four main challenges: maintaining and optimizing high investment rates into RES generation technologies, providing balancing capacities, reducing demand, and adapting the grid to the changing needs. Policy recommendations for these four tasks highlight the need to intensify electricity demand reduction and also consider the potential interactions between the German electricity system and its neighbouring countries.
On behalf of the Port of Rotterdam Authority, the Wuppertal Institute developed three possible pathways for a decarbonised port of Rotterdam until 2050. The port area is home to about 80 per cent of the Netherlands' petrochemical industry and significant power plant capacities. Consequently, the port of Rotterdam has the potential of being an international leader for the global energy transition, playing an important role when it comes to reducing CO2 emissions in order to deliver on the EU's long-term climate goals.
The three decarbonisation scenarios all built on the increasing use of renewables (wind and solar power) and the adoption of the best available technologies (efficiency). The analysis focuses on power plants, refineries and the chemical industry, which together are responsible for more than 90 per cent of the port area's current CO2 emissions.
The decarbonisation scenarios describe how CO2 emissions could be reduced by 75 to 98 per cent in 2050 (compared to 2015). Depending on the scenario, different mitigation strategies are relied upon, including electrification, closure of carbon cycles or carbon capture and storage (CCS). The study includes recommendations for local companies, the Port Authority as well as policy makers. In addition, the study includes a reference scenario, which makes it clear that a "business as usual" mentality will fall well short of contributing adequately to the EU's long-term climate goals.
The Port of Rotterdam is an important industrial cluster mainly comprising of oil refining, chemical manufacturing and power and steam generation. In 2015, the area accounted for 18 % of the Netherlands' total CO2 emissions. The Port of Rotterdam Authority is aware that the port's economy is heavily exposed to future global and EU decarbonization policies, as the bulk of its activities focuses on trading, handling, converting and using fossil fuels. Based on a study for the Port Authority, our paper explores possible pathways of how the industrial cluster can keep its strong market position in Europe and still reduce its CO2 emissions by 98 % by 2050. The "Biomass and CCS" scenario assumes that large amounts of biomass can be supplied sustainably and will be used in the port for power generation as well as for feedstock for refineries and the chemical industry. Fischer-Tropsch fuel generation plays an important role in this scenario, allowing the port to become a key cluster for the production of synthetic fuels and feedstocks in Western Europe. The "Closed Carbon Cycle" scenario assumes that renewables-based electricity will be used at the port to supply heat and hydrogen for the synthetic generation of feedstock for the chemical industry. The carbon required for the chemicals will stem from recycled waste. Technologies particularly needed in this scenario are water electrolysis and gasification or pyrolysis to capture carbon from waste, as well as technologies for the production of base chemicals from syngas. The paper compares both scenarios with regard to their respective technological choices and infrastructural changes. The scenarios’ particular opportunities and challenges are also discussed. Using possible future pathways of a major European petrochemical cluster as an example, the paper illustrates options for deep decarbonisation of energy intensive industries in the EU and beyond.