Zukünftige Energie- und Industriesysteme
Refine
Has Fulltext
- yes (76) (remove)
Year of Publication
Document Type
- Peer-Reviewed Article (31)
- Report (27)
- Contribution to Periodical (6)
- Part of a Book (4)
- Conference Object (3)
- Working Paper (3)
- Book (2)
Ende Dezember 2008 wurde im Europäischen Parlament die "Richtlinie über die geologische Speicherung von CO2" (auch als CCS-Richtlinie bezeichnet) verabschiedet, die eine Schlüsselrolle für die Entwicklung und die Umsetzung von Projekten der CO2-Abscheidung und -Speicherung (CCS) spielt. Der Artikel erläutert den Zusammenhang der CCS-Richtlinie mit dem Energie- und Klimapaket der EU, stellt die wesentlichen Inhalte der Richtlinie vor, zeigt die energiewirtschaftlichen Implikationen auf und arbeitet heraus, welche Regelungen zur Umsetzung der Richtlinie nun vom deutschen Gesetzgeber erfolgen müssen.
Carbon capture and storage
(2009)
Considering the traditional coal-based energy infrastructure in the German state North Rhine-Westphalia the question arises how to face the needs of embanking climate change. To reduce greenhouse gas intensive electricity generation in the Ruhr area, the introduction of carbon capture and storage (CCS) is an option of particular relevance. The paper investigates and discusses possibilities of setting up a CCS infrastructure in NRW. It shall clarify whether, and possibly how, highly efficient conventional fossil fired power plants could be refitted with CO2 capture to flexibly react to potentially changing climate policy conditions and to keep up with the market.
It is now widely recognized that effective communication and demand-side policies for alternative energy require sound knowledge of preferences and determinants of demand of the public and consumers. To date, public attitudes towards new transport technologies have been studied under very different conceptual frameworks. This paper gives an overview of the various conceptual frameworks and methodologies used, where four main approaches can be distinguished: general attitudinal surveys, risk perception studies, non-market economic valuation studies, and other approaches such as those based on semiotic theory. We then review the findings of the recent literature on acceptance, attitudes and preferences for hydrogen and fuelcell end-use technologies, focusing on vehicles. These studies are then contrasted with related research into alternative fuel vehicles. The paper finally discusses the main trends in research and avenues for further work in this field. We recommend, among other things, the use of approaches that build knowledge and familiarity with the technology prior to the exploration of attitudes, and the set up of studies that take a whole-systems perspective of hydrogen technologies and that look at hydrogen in the context of other competing clean technologies.
Several energy scenario studies consider concentrated solar power (CSP) plants as an important technology option to reduce the world's CO2 emissions to a level required for not letting the global average temperature exceed a threshold of 2–2.4 °C. A global ramp up of CSP technologies offers great economic opportunities for technology providers as CSP technologies include highly specialised components. This paper analyses possible value creation effects resulting from a global deployment of CSP until 2050 as projected in scenarios of the International Energy Agency (IEA) and Greenpeace International. The analysis focuses on the economic opportunities of German technology providers since companies such as Schott Solar, Flabeg or Solar Millennium are among the leading suppliers of CSP technologies on the global market.
Concentrated solar power (CSP) plants are one of several renewable energy technologies with significant potential to meet a part of future energy demand. An integrated technology assessment shows that CSP plants could play a promising role in Africa and Europe, helping to reach ambitious climate protection goals. Based on the analysis of driving forces and barriers, at first three future envisaged technology scenarios are developed. Depending on the underlying assumptions, an installed capacity of 120 GWel, 405 GWel or even 1,000 GWel could be reached globally in 2050. In the latter case, CSP would then meet 13–15% of global electricity demand. Depending on these scenarios, cost reduction curves for North Africa and Europe are derived. The cost assessment conducted for two virtual sites in Algeria and in Spain shows a long-term reduction of electricity generating costs to figures between 4 and 6 ct/kWhel in 2050. The paper concludes with an ecological analysis based on life cycle assessment. Although the greenhouse gas emissions of current (solar only operated) CSP systems show a good performance (31 g CO2-equivalents/kWhel) compared with advanced fossil-fired systems (130–900 CO2-eq./kWhel), they could further be reduced to 18 g CO2-eq./kWhel in 2050, including transmission from North Africa to Europe.
Um das vom Weltklimarat (IPCC) geforderte 2°C-Ziel einhalten zu können, ist eine Reduktion der globalen CO2-Emissionen um 80% bis 2050 gegenüber dem Stand von 1990 zwingend notwendig. Hierbei wird auch solarthermischen Kraftwerken eine immer größere Bedeutung beigemessen. Im BLUE Map-Szenario der Internationalen Energieagentur (IEA), das von einer CO2-Reduktion um 50% bis 2050 gegenüber 2005 ausgeht, müssen im Jahr 2050 ca. 11% (4.754 TWh) des weltweiten Strombedarfs durch Sonnenenergie gedeckt werden (IEA 2008). Neben Photovoltaik sollen solarthermische Kraftwerke (Concentrated Solar Power, CSP) etwa 46% (ca. 2.200 TWh) der prognostizierten Menge an Solarstrom erzeugen. Im Energy[R]evolution Szenario von Greenpeace International und EREC (European Renewable Energy Council) aus dem Jahr 2008 werden rund 6.000 TWh an CSP-Strom im Jahr 2050 angenommen (bei einer installierten Leistung von 801 GW), während andere Studien bis zu 1.000 GW installierter Leistung in 2050 betrachten (Viebahn et al. 2010). Die DESERTEC-Initiative gibt ein Ziel von 5.000 GW installierter Leistung im Jahr 2050 vor.
Der Export von CSP-Technologien in die "Sunbelt"-Regionen bietet große Chancen für deutsche Anlagenbauer. So sind u.a. Schott Solar, die Ferrostaal Group mit ihrem Geschäftssegment "Solar Energy", Flagsol, die Solar Power Group, Solar Millenium und Fichtner Solar auf dem Gebiet CSP aktiv. Schott Solar (Receiver) und Flabeg (Spiegel) haben eine weltweit führende Markstellung inne. Große deutsche Energieversorger und Anlagenbauer wie E.On, RWE und Siemens gehören zum Industriekonsortium der Desertec Industrial Initiative, die den Ausbau von CSP in der MENA-Region vorantreiben will. Die Initiative wurde von der Münchener Rück angestoßen.
In diesem Artikel wird dargestellt, welche Aktivitäten deutsche Unternehmen entlang der Wertschöpfungskette bislang aufweisen und wie ihre Marktstellung im Vergleich zu führenden internationalen Unternehmen zu bewerten ist. Anschließend wird auf Basis von vorliegenden Energieszenarien ermittelt, welche messbaren ökonomischen Effekte für deutsche Unternehmen, z.B. zusätzliche Wertschöpfung und die Schaffung neuer Arbeitsplätze, aus den genannen Potentialen resultieren. Die Ergebnisse basieren auf einer Studie des Wuppertal Instituts, die im Auftrag von Greenpeace Deutschland und der DESERTEC Foundation erstellt wurde.
CCS is discussed in a broad sense throughout Europe. In this paper a cautious, conservative estimate of CO2 storage capacity for Germany and its neighbouring countries where CO2 emissions from Germany could possibly be stored (Netherlands, France, Denmark, Norway, UK and Poland) is presented. Such a lower limit calculation is necessary for orientation purposes for potential investors and political decision-makers.
Conservative CO2 sequestration capacity in deep saline aquifers for Germany is derived by the volumetric approach where parameters such as efficiency factor, CO2 density, porosity of the geological formation are of interest. It is assumed that every geological system is closed and thus an efficiency factor of 0.1 per cent (based on maximum pressure increase and total compressibility) for saline aquifers is applied. The capacity of German depleted oil and gas fields is based on cumulative recovery data and a sweep efficiency of 75 per cent. The storage capacity in the other considered countries, adjacent to Germany, are based on a critical review and adjustment of the results of the European reports JOULE II, GESTCO and GeoCapacity.
The conservative capacities for all countries together amount to 49 Gt CO2, from which Norway and the UK provide 36 Gt, all offshore in the North Sea. Compared to the emissions from large point sources in these countries during 40 years (47.6 Gt of CO2), a virtual balance is achieved. This can only be reached, if a large scale CO2 pipeline system is installed to connect these countries, especially Germany, to the large sinks in the North Sea. If additional restrictions like source-sink matching, acceptance issues and injection rates constraints are taken into account, the available storage space gets increasingly scarce.
Carbon capture and storage (CCS) might be an important climate protection technology for coal-rich countries. This paper presents first results of a systemic and long-term analysis of a future CCS implementation in India. It focuses on potential storage formations in the geological subsurface and the geographic match of these sinks with CO2 emissions of current and future largepoint power plants. The analysis is framed by an overview on India’s position on CCS, ongoing Indian research and development projects as well as its international activities.
The geological potential for CO2 sequestration in India is subject to large uncertainty because, so far, only few studies estimated it in a vague manner. A first meta-analysis shows that there is a huge variation between 48 Gt and 572 Gt of CO2. The main differences between the evaluated studies are the assumed capacities for deep saline aquifers and basalt formations. Taking the ongoing discussion and the existing uncertainties into account, the storage potential might be provided only by aquifers (in the range of 44 to 360 Gt of CO2) and hydrocarbon fields (2 to 7 Gt of CO2).
The amount of CO2 emissions possibly available for sequestration is assessed by applying three substantially different long-term energy scenarios for India. These scenarios, indicating pathways between a "low carbon" and a "high carbon" development until 2050, result in cumulated CO2 emissions between 30 and 171 Gt if all new large-scaled power plants will be based on CCS from 2020 on. Compared with the sink capacities, only the CO2 emissions of scenario S2 (30 Gt) could theoretically be stored with high certainty. Considering the scenarios S3 and S1, their CO2 emissions (94 Gt and 171 Gt, respectively) could only be sequestered if the aquifer capacity would prove to be usable. Geological storage sites do not appear to be located close to sources in South West, Central, North and North East India. This first rough analysis means that only those CO2 emissions occurring in the Western parts of North and West India, the Eastern part of South India as well as the South part of East India might be suited for sequestration nearby.
A more detailed source-sink matching will follow in the next phase of the project, including results of expert meetings in India. Furthermore, this analysis will be complemented by an additional assessment from economic, ecological and resource-strategic points of view, which might further affect the potential for CCS.
The study presents the results of an integrated assessment of carbon capture and storage (CCS) in the power plant sector in Germany, with special emphasis on the competition with renewable energy technologies. Assessment dimensions comprise technical, economic and environmental aspects, long-term scenario analysis, the role of stakeholders and public acceptance and regulatory issues. The results lead to the overall conclusion that there might not necessarily be a need to focus additionally on CCS in the power plant sector. Even in case of ambitious climate protection targets, current energy policy priorities (expansion of renewable energies and combined heat and power plants as well as enhanced energy productivity) result in a limited demand for CCS. In case that the large energy saving potential aimed for can only partly be implemented, the rising gap in CO2 reduction could only be closed by setting up a CCS-maximum strategy. In this case, up to 22% (41 GW) of the totally installed load in 2050 could be based on CCS. Assuming a more realistic scenario variant applying CCS to only 20 GW or lower would not be sufficient to reach the envisaged climate targets in the electricity sector. Furthermore, the growing public opposition against CO2 storage projects appears as a key barrier, supplemented by major uncertainties concerning the estimation of storage potentials, the long-term cost development as well as the environmental burdens which abound when applying a life-cycle approach. However, recently, alternative applications are being increasingly considered–that is the capture of CO2 at industrial point sources and biomass based energy production (electricity, heat and fuels) where assessment studies for exploring the potentials, limits and requirements for commercial use are missing so far. Globally, CCS at power plants might be an important climate protection technology: coal-consuming countries such as China and India are increasingly moving centre stage into the debate. Here, similar investigations on the development and the integration of both, CCS and renewable energies, into the individual energy system structures of such countries would be reasonable.
If the current energy policy priorities are retained, there may be no need to focus additionally on carbon capture and storage (CCS) in the power plant sector of Germany. This applies even in the case of ambitious climate protection targets, according to the results of the presented integrated assessment study. These cover a variety of aspects: Firstly, the technology is not expected to become available on a large scale in Germany before 2025. Secondly, if renewable energies and combined heat and power are expanded further and energy productivity is enhanced, there is likely to be only a limited demand for CCS power plants, as a scenario analysis of CCS deployment in Germany shows. Thirdly, cost analysis using the learning curve approach shows that the electricity generation costs of renewable electricity approach those of CCS power plants. This leads to the consequence that, from 2020, several renewable technologies may well be in a position to offer electricity at a cheaper rate than CCS power plants. In addition, a review of new life cycle assessments for CO2 separation in the power plant sector indicates that the greenhouse gas emissions from 1 kW h of electricity generated by first-generation CCS power plants could only be reduced by 68 % to 87 % (95 % in individual cases). Finally, a cautious, conservative estimate of the effective German CO2 storage capacity of approximately 5 billion tonnes of CO2 is calculated, including a fluctuation range yielding values between 4 and 15 billion tonnes of CO2. Therefore, the total CO2 emissions caused by large point sources in Germany could be stored for 12 years (basic value) or for 8 or 33 years (sensitivity values).
Eine oft kontrovers diskutierte Frage ist, ob eine massive Dämmung von Häusern in der Gesamtbilanz nicht mehr Ressourcenverbrauch und Emissionen verursacht, als sie im Endeffekt einspart. Zur Untersuchung dieser Frage wurde nun erstmals eine trade-off Analyse durchgeführt. Hierzu wurde ein bottom-up Wirkungsanalyse-Modell entwickelt, dessen Kern ein Emissions- und Energiemodell für den Haushaltssektor bildet, gekoppelt mit einem Ökobilanzierungs-Tool. Den Rahmen für beide Modelle bilden Energieszenarien bis 2050, die für jede Dekade Sanierungsraten und Energiemixe vorgeben. Damit können "reine" Energieszenarien um ressourcenpolitische Analysen erweitert und die Auswirkungen verschiedener Dämmstrategien ermittelt werden.
Das zentrale Ergebnis der Modellierung ist, dass zusätzliche Aufwendungen für Dämmstoffe (untersucht wurden extrudierter Polystyrolhartschaum XPS und Zellulose) sowohl ressourcen- als auch emissionsseitig in fast allen Umweltwirkungskategorien durch erhebliche Einsparungen bei der Gebäudebeheizung überkompensiert werden. Im Wesentlichen sind keine Trade-offs erkennbar und der prozentuale Beitrag der Dämmstoffe an den Umweltwirkungsindikatoren ist gering. Relevant ist dagegen die Wahl des Treibmittels bei den aufgeschäumten XPS-Dämmstoffen: Gegenüber dem in Deutschland verwendeten XPS, das weitgehend mit CO2 aufgeschäumt wird, führt ein Dämmstoff, der hohe Anteile an Fluorkohlenwasserstoffen aufweist, zu einem hohen Trade-off bezüglich der Wirkungskategorie "stratosphärischer Ozonabbau" und zu einer erkennbaren, jedoch nicht so deutlichen Wirkung auf das Treibhaus-Potenzial. Eine Sensitivitätsanalyse mit dem alternativen Dämmmaterial Zellulose zeigt, dass sich die an sich schon geringen Anteile der Dämmstoffe an den Umweltwirkungsindikatoren weiter verringern. Hinsichtlich der Materialintensität sind XPS- und Zellulose-Dämmung jedoch mit vergleichbaren Auswirkungen verbunden.
Zusammenfassend lässt sich festhalten, dass für beide Materialien ambitionierte Dämmstoffstrategien im Hinblick auf alle in dieser Studie analysierten Faktoren einen wesentlichen Beitrag sowohl zu Materialeffizienz- als auch zu Emissionsminderungszielen leisten können.
Il Wuppertal Institute ha condotto uno studio per valutare quali materiali sono da considerare critici in relazione al previsto incremento di energie rinnovabili in Germania. I problemi relativi a materiali come terre rare e vanadio riguardano la dipendenza da pochi paesi fornitori e gli usi competitivi.
The main objective of this article is to evaluate CO2 mitigation potential and to calculate costs avoided by the use of different CO2 mitigation technologies in China's cement sector, namely energy efficiency improvements, use of alternative fuels, clinker substitution and carbon capture and storage (CCS). Three scenarios are designed based on the projection of cement output and technology development over the next 40 years (2010–2050). 2.5, 4.7 and 4.3 Gt tonnes of CO2 will be saved totally in basic scenario and two low carbon scenarios up to 2050. By comparing these technologies along the scenarios, it can be concluded that CO2 emissions can mainly be reduced by energy efficiency improvements and use of alternative fuels. Clinker substitution, which reduces the clinker-to-cement ratio as well as energy intensity, results in significant cost advantages. CCS, including post-combustion capture and oxy-fuel combustion capture, could play an important role in the capture of CO2 in the cement industry, and is expected to be in commercial use by 2030.
Prospects of carbon capture and storage (CCS) in India's power sector : an integrated assessment
(2014)
Objective: The aim of the present article is to conduct an integrated assessment in order to explore whether CCS could be a viable technological option for significantly reducing future CO2 emissions in India. Methods: In this paper, an integrated approach covering five assessment dimensions is chosen. However, each dimension is investigated using specific methods (graphical abstract).
Results: The most crucial precondition that must be met is a reliable storage capacity assessment based on site-specific geological data since only rough figures concerning the theoretical capacity exist at present. Our projection of different trends of coal-based power plant capacities up to 2050 ranges between 13 and 111 Gt of CO2 that may be captured from coal-fired power plants to be built by 2050. If very optimistic assumptions about the country's CO2 storage potential are applied, 75 Gt of CO2 could theoretically be stored as a result of matching these sources with suitable sinks. If a cautious approach is taken by considering the country's effective storage potential, only a fraction may potentially be sequestered. In practice, this potential will decrease further with the impact of technical, legal, economic and social acceptance factors. Further constraints may be the delayed commercial availability of CCS in India, a significant barrier to achieving the economic viability of CCS, an expected net maximum reduction rate of the power plant’s greenhouse gas emissions of 71-74%, an increase of most other environmental and social impacts, and a lack of governmental, industrial or societal CCS advocates.
Conclusion and practice implications: Several preconditions need to be fulfilled if CCS is to play a future role in reducing CO2 emissions in India, the most crucial one being to determine reliable storage capacity figures. In order to overcome these barriers, the industrialised world would need to make a stronger commitment in terms of CCS technology demonstration, cooperation and transfer to emerging economies like India. The integrated assessment might also be extended by a comparison with other low-carbon technology options to draw fully valid conclusions on the most suitable solution for a sustainable future energy supply in India.
Eine zukünftige Herausforderung der Energiewende wird darin bestehen, zunehmende Stromnetzeinspeisungen von fluktuierenden erneuerbaren Energien (FEE) in das Energiesystem zu integrieren. Neben den Flexibilitäten im Stromsystem sollten dabei auch die Möglichkeiten des Wärmemarktes zur Stabilisierung des Strommarktes berücksichtigt werden. So können Kraft-Wärme-Kopplungs-Anlagen (KWK), Elektroheizer und Wärmepumpen als Verbindungstechnologien zwischen Strom- und Wärmemarkt abhängig vom FEE-Dargebot und damit auch den Preissignalen des Strommarktes zu- bzw. abgeschaltet werden. Dazu werden Wärmespeicher benötigt, da die Flexibilisierung nur möglich ist, wenn die Produktion von der Wärmenutzung entkoppelt werden kann. Eine besonders aussichtsreiche Kopplung von Strom- und Wärmemarkt ist im Bereich der Fernwärmesysteme möglich, da sich hier große Energiemengen in Fernwärmespeichern im Vergleich zu dezentralen Lösungen kostengünstiger und effizienter speichern lassen.
Für die Umsetzung der Energiewende und speziell den Ausbau erneuerbarer Energien sind nicht nur energiewirtschaftliche oder Klimaschutz-Kriterien maßgeblich. Zu einer umfassenden Nachhaltigkeitsbewertung gehört unter anderem auch die Ressourcenbewertung. Hier ist unstrittig, dass die Gesamt-Ressourceninanspruchnahme eines Energiesystems generell erheblich niedriger ist, wenn dieses nicht auf fossilen, sondern auf erneuerbaren Energien basiert (und dabei nicht hauptsächlich auf Biomasse ausgerichtet ist). Bisher wurde jedoch insbesondere der Verbrauch und die langfristige Verfügbarkeit der mineralischen Rohstoffe, die in der Regel zur Herstellung von Energiewandlern und Infrastruktur benötigt werden, wenig untersucht.
Im Rahmen des Projekts KRESSE wurde daher erstmals analysiert, welche "kritischen" mineralischen Rohstoffe für die Herstellung von Technologien, die Strom, Wärme und Kraftstoffe aus erneuerbaren Energien erzeugen, bei einer zeitlichen Perspektive bis zum Jahr 2050 in Deutschland relevant sind. Die Einschätzung als "kritisch" umfasst dabei die langfristige Verfügbarkeit der identifizierten Rohstoffe, die Versorgungssituation, die Recyclingfähigkeit und die Umweltbedingungen der Förderung. Die Studie macht deutlich, dass die geologische Verfügbarkeit mineralischer Rohstoffe für den geplanten Ausbau der erneuerbaren Energien in Deutschland grundsätzlich keine limitierende Größe darstellt. Dabei kann jedoch möglicherweise nicht jede Technologievariante unbeschränkt zum Einsatz kommen.
This study conducted by Wuppertal Institute and Germanwatch explores how the social pillar of sustainability at the local level could be met in Concentrated Solar Power (CSP) projects. For this purpose, the authors evaluate the livelihood dimension of CSP technology based on a case study conducted on the 160 MW pilot CSP plant Nooro I in Ouarzazate, Morocco.
The German government has set itself the target of reducing the country's GHG emissions by between 80 and 95% by 2050 compared to 1990 levels. Alongside energy efficiency, renewable energy sources are set to play the main role in this transition. However, the large-scale deployment of renewable energies is expected to cause increased demand for critical mineral resources. The aim of this article is therefore to determine whether the transformation of the German energy system by 2050 ("Energiewende") may possibly be restricted by a lack of critical minerals, focusing primarily on the power sector (generating, transporting and storing electricity from renewable sources). For the relevant technologies, we create roadmaps describing a number of conceivable quantitative market developments in Germany. Estimating the current and future specific material demand of the options selected and projecting them along a range of long-term energy scenarios allows us to assess potential medium- or long-term mineral resource restrictions. The main conclusion we draw is that the shift towards an energy system based on renewable sources that is currently being pursued is principally compatible with the geological availability and supply of mineral resources. In fact, we identified certain sub-technologies as being critical with regard to potential supply risks, owing to dependencies on a small number of supplier countries and competing uses. These sub-technologies are certain wind power plants requiring neodymium and dysprosium, thin-film CIGS photovoltaic cells using indium and selenium, and large-scale redox flow batteries using vanadium. However, non-critical alternatives to these technologies do indeed exist. The likelihood of supplies being restricted can be decreased further by cooperating even more closely with companies in the supplier countries and their governments, and by establishing greater resource efficiency and recyclability as key elements of technology development.
The CO2 utilisation is discussed as one of the future low-carbon technologies in order to accomplish a full decarbonisation in the energy intensive industry. CO2 is separated from the flue gas stream of power plants or industrial plants and is prepared for further processing as raw material. CO2 containing gas streams from industrial processes exhibit a higher concentration of CO2 than flue gases from power plants; consequentially, industrial CO2 sources are used as raw material for the chemical industry and for the synthesis of fuel on the output side. Additionally, fossil resources can be replaced by substitutes of reused CO2 on the input side. If set up in a right way, this step into a CO2-based circular flow economy could make a contribution to the decarbonisation of the industrial sector and according to the adjusted potential, even rudimentarily to the energy sector.
In this study, the authors analyse potential CO2 sources, the potential demand and the range of applications of CO2. In the last chapter of the final report, they give recommendations for research, development, politics and economics for an appropriate future designing of CO2 utilisation options based upon their previous analysis.
Der Ergebnisbericht dokumentiert in Kapitel 2 die in diesem Forschungsvorhaben durchgeführten Arbeiten an dem von der TU Delft entwickelten agentenbasierten Strommarktmodell EMLab-Generation, das als Open-Source Modell konzipiert ist. Einen zentralen Aspekt bildet die Übertragung des Modells, das ursprünglich die beiden Regionen CWE (Central-Western- Europe) und UK umfasste, auf ein Modell mit den beiden Regionen Deutschland und Europa (ohne Deutschland), im Wesentlichen in den Grenzen der EU28. Diese Übertragung ist die Grundlage für die Untersuchung unterschiedlicher Fragestellungen hinsichtlich der zukünftigen Entwicklung des Strommarkts in Deutschland innerhalb des europäischen Verbundnetzes bei hohen Anteilen fluktuierender erneuerbarer Energien an der Stromerzeugung.
Nach der Darstellung der konkreten Zielsetzung und der Grundlagen des vorhandenen Modells werden im Hauptteil (Kapitel 2.3) die eigenen Modellierungsarbeiten (Datenaufbereitung, Modellierung und "lessons learned") beschrieben. Im Anschluss erfolgt eine kurze Darstellung einer noch in Erarbeitung befindlichen Masterarbeit zur Berücksichtigung von Risikoaspekten innerhalb des Investitionsalgorithmus' von EMLab-Generation, die sich aus dem internationalen ABM-Workshop als offene methodische Fragestellung von Strommarktmodellen ergeben hat (Kapitel 2.4). Kapitel 2.5 gibt eine kritische Einschätzung der erreichten Modellierungsergebnisse sowie weitere mögliche Anwendungen der neu konzipierten Modellregionen.
Kapitel 3 gibt anschließend einen Überblick über die in diesem Vorhaben durchgeführten gemeinsamen Workshops zwischen TU Delft und Wuppertal Institut sowie den internationalen Workshop, an dem fünf Forschungseinrichtungen aus Deutschland sowie die TU Delft erstmals ihre Erfahrungen mit ABM-Strommarktmodellierung austauschten und methodischen Forschungsbedarf aufarbeiteten.
Der Bericht schließt mit einer kurzen Zusammenfassung sowie einem Ausblick auf weitere Forschungsarbeiten, mit denen die im Rahmen dieser Anbahnungsmaßnahme begonnene Kooperation zwischen Wuppertal Institut und TU Delft fortgesetzt werden soll.
Prospects of carbon capture and storage (CCS) in China's power sector : an integrated assessment
(2015)
Objective: The aim of the present article is to conduct an integrated assessment in order to explore whether CCS could be a viable technological option for significantly reducing future CO2 emissions in China. Methods: In this paper, an integrated approach covering five assessment dimensions is chosen. Each dimension is investigated using specific methods (graphical abstract). Results: The most crucial precondition that must be met is a reliable storage capacity assessment based on site-specific geological data. Our projection of different trends of coal-based power plant capacities up to 2050 ranges between 34 and 221 Gt of CO2 that may be captured from coal-fired power plants to be built by 2050. If very optimistic assumptions about the country’s CO2 storage potential are applied, 192 Gt of CO2 could theoretically be stored as a result of matching these sources with suitable sinks. If a cautious approach is taken, this figure falls to 29 Gt of CO2. In practice, this potential will decrease further with the impact of technical, legal, economic and social acceptance factors. Further constraints may be the delayed commercial availability of CCS in China; a significant barrier to achieving the economic viability of CCS due to a currently non-existing nation-wide CO2 pricing scheme that generates a sufficiently strong price signal; an expected life-cycle reduction rate of the power plant's greenhouse gas emissions of 59-60%; and an increase in most other negative environmental and social impacts. Conclusion and practice implications: Most experts expect a striking dominance of coal-fired power generation in the country's electricity sector, even if the recent trend towards a flattened deployment of coal capacity and reduced annual growth rates of coal-fired generation proves to be true in the future. In order to reduce fossil fuel-related CO2 emissions to a level that would be consistent with the long-term climate protection target of the international community to which China is increasingly committing itself, this option may require the introduction of CCS. However, a precondition for opting for CCS would be finding robust solutions to the constraints highlighted in this article. Furthermore, a comparison with other low-carbon technology options may be useful in drawing completely valid conclusions on the economic, ecological and social viability of CCS in a low-carbon policy environment. The assessment dimensions should be integrated into macro-economic optimisation models by combining qualitative with quantitative modelling, and the flexible operation of CCS power plants should be analysed in view of a possible role of CCS for balancing fluctuating renewable energies.
This article presents an integrated assessment conducted in order to explore whether carbon capture and storage (CCS) could be a viable technological option for significantly reducing future CO2 emissions in South Africa. The methodological approach covers a commercial availability analysis, an analysis of the long-term usable CO2 storage potential (based on storage capacity assessment, energy scenario analysis and source-sink matching), an economic and ecological assessment and a stakeholder analysis. The findings show, that a reliable storage capacity assessment is needed, since only rough figures concerning the effective capacity currently exist. Further constraints on the fast deployment of CCS may be the delayed commercial availability of CCS, significant barriers to increasing the economic viability of CCS, an expected net maximum reduction rate of the power plant's greenhouse gas emissions of 67%-72%, an increase in other environmental and social impacts, and low public awareness of CCS. One precondition for opting for CCS would be to find robust solutions to these constraints, taking into account that CCS could potentially conflict with other important policy objectives, such as affordable electricity rates to give the whole population access to electricity.
Die Transformationsprozesse hin zu einer nachhaltigen Entwicklung sind komplex.
Wie kann Wissenschaft dazu beitragen, dass neue Lösungen und Ideen in der Praxis zu Veränderung führen? Dieser Frage gehen die Autorinnen und Autoren am Beispiel der Gebäudeenergiewende nach. Eine transformative Forschung, die den neutralen Beobachterposten verlässt, braucht entsprechende Konzepte und Methoden: Wie kann Wissen aus unterschiedlichen Disziplinen und aus der Praxis integriert werden, um komplexe Sachverhalte und Zusammenhänge zu erklären und zu verstehen? Welche Rolle spielen komplexe (agentenbasierte) Modelle und Experimente dabei? Wie sieht der Methodenmix einer transformativen Wissenschaft aus, die Akteure bei Transformationsprozessen aktiv unterstützt? Illustriert werden diese Fragen am Beispiel des vom BMBF geförderten Forschungsprojektes "EnerTransRuhr".
Facing the uncertainty of CO2 storage capacity in China by developing different storage scenarios
(2016)
China is very active in the research and development of CO2 capture and storage technologies (CCS). However, existing estimates for CO2 storage capacity are very uncertain. This uncertainty is due to limited geological knowledge, a lack of large-scale research on CO2 injection, and different assessment approaches and parameter settings. Hence storage scenarios represent a method that can be used by policy makers to demonstrate the range of possible storage capacity developments, to help interpret uncertain results and to identify the limitations of existing assessments. In this paper, three storage scenarios are developed for China by evaluating China-wide studies supplemented with more detailed site- and basin-specific assessments. It is estimated that the greatest storage potential can be found in deep saline aquifers. Oil and gas fields may also be used. Coal seams are only included in the highest storage scenario. In total, the scenarios presented demonstrate that China has an effective storage capacity of between 65 and 1551 Gt of CO2. Furthermore, the authors emphasise a need for action to harmonise storage capacity assessment approaches due to the uncertainties involved in the capacity assessments analysed in this study.
In dem Forschungsprojekt "Technologien für die Energiewende" (TF_Energiewende) bewertet ein Konsortium von drei Verbundpartnern und zehn Technologiepartnern unter der Federführung des Wuppertal Instituts seit Herbst 2016 den mittelfristigen Forschungs- und Entwicklungsbedarf für die zentralen Technologien, die im Rahmen der Energiewende derzeit und zukünftig benötigt werden.
One of the main objectives of impact assessments is to identify potentially significant impacts. However, determining this significance has received very limited attention as a procedural step in social impact assessments. Consequently, only limited research and documentation exists on approaches, survey tools and evaluation methods, especially with regard to participatory approaches and combined participatory-technical approaches. This study aims to address this research gap by developing and applying a joined participatory and technical impact significance evaluation. The approach is applied in a case study which analysed the livelihood impacts of the large-scale concentrated solar power plant NOORO I in Ouarzazate, Morocco.
The analysis shows that although different approaches and significance criteria must be applied when involving both local stakeholders and experts, the linked analysis offers more robust results and an improved basis for decision-making. Furthermore, it was observed in the case study that impacts affecting the social, cultural and political spheres were more often considered significant than impacts affecting the physical and material livelihood dimensions. Regarding sustainability assessments of large-scale renewable energy plants, these findings underline the importance (as for other large-scale infrastructure developments) of placing greater emphasis on the inclusion of social aspects in impact assessments.
The transformation processes towards a sustainable development are complex. How can science contribute towards new solutions and ideas leading to change in practice? The authors of this book discuss these questions along the energy transition in the building sector.
A transformative research that leaves the neutral observer position needs appropriate concepts and methods: how can knowledge from different disciplines and from practice be integrated in order to be able to explain and understand complex circumstances and interrelations? What role do complex (agent-based) models and experiments play in this respect? Which mix of methods is required in transformative science in order to actively support the actors in transformation processes?
Theses questions are illustrated by the example of the BMBF funded project "EnerTransRuhr".
There is an increasing pressure that enhanced and novel energy technologies are swiftly adopted by the market to ensure meeting the energy and climate targets. An important issue with such novel developments is their risk to be stuck in the "valley of death", i.e. that their transition to the market is delayed or unsuccessful. Publicly supported demonstration projects could help to bridge the valley of death by reducing barriers to the adoption caused by missing information and perceived risks. A challenge for technology demonstrations in the industrial context is their often high investments that are required to prove their real-world benefits. Given the magnitude of such investments, it becomes crucial that public funding focuses on the most promising demonstration proposals. Structured evaluation processes can help to facilitate the identification of promising proposals and to improve the quality and transparency of decisions. This paper deals with a corresponding multi-staged multi-criteria decision support system (DSS) suggested to the German Federal Ministry for Economic Affairs and Energy. It deals with the evaluation of demonstration proposals across three stages: The first stage represents a filtering stage to identify those proposals relevant for further considerations. The second stage comprises a multi-criteria scoring method drawing on an evaluation against nineteen criteria. The final third stage serves to critically review the need for public funding of well-scored proposals. This contribution outlines the development of the DSS and its design and thus provides insights on proposal evaluating in energy research.
Der Politikbericht ist ein Ergebnis des Forschungsvorhabens "Technologien für die Energiewende", das vom Bundesministerium für Wirtschaft und Energie (BMWi) als Teil des strategischen Leitprojekts "Trends und Perspektiven der Energieforschung" von 2016 bis 2018 gefördert wurde. Er enthält neben einer kurzen deutschen und englischen Einleitung vierseitige Zusammenfassungen zu jedem der 31 analysierten Technologiefelder und eine Kurzdarstellung der Bewertungsmethodik. Die Zusammenfassungen sind gegliedert nach Definition des Technologiefeldes, aktueller Stand der Technologie, ausgewählte Bewertungskriterien und F&E-Empfehlungen.
For many years, carbon capture and storage (CCS) has been discussed as a technology that may make a significant contribution to achieving major reductions in greenhouse gas emissions. At present, however, only two large-scale power plants capture a total of 2.4 Mt CO2/a. Several reasons are identified for this mismatch between expectations and realised deployment. Applying bibliographic coupling, the research front of CCS, understood to be published peer-reviewed papers, is explored to scrutinise whether the current research is sufficient to meet these problems. The analysis reveals that research is dominated by technical research (69%). Only 31% of papers address non-technical issues, particularly exploring public perception, policy, and regulation, providing a broader view on CCS implementation on the regional or national level, or using assessment frameworks. This shows that the research is advancing and attempting to meet the outlined problems, which are mainly non-technology related. In addition to strengthening this research, the proportion of papers that adopt a holistic approach may be increased in a bid to meet the challenges involved in transforming a complex energy system. It may also be useful to include a broad variety of stakeholders in research so as to provide a more resilient development of CCS deployment strategies.