Zukünftige Energie- und Industriesysteme
Refine
Year of Publication
Document Type
- Peer-Reviewed Article (35)
- Report (33)
- Contribution to Periodical (13)
- Part of a Book (12)
- Conference Object (11)
- Working Paper (4)
- Book (2)
- Habilitation (1)
The energy sector today accounts for about 10% to 15% of global freshwater withdrawal. Most water in the energy sector is used for generating electricity, especially for cooling processes in thermal power plants. At the same time the demand for electricity is expected to increase significantly due to population growth and economic development in emerging and developing economies. Growing demand is also driven by electrification strategies pursued by industrialized countries to decarbonize their economies. With the global demand for electricity expected to increase significantly in the coming decades also the water demand in the power sector is expected to rise. However, due to the on-going global energy transition, the future structure of the power supply - and hence future water demand for power generation - is subject to high levels of uncertainty because the volume of water required for electricity generation varies significantly depending on both the generation technology and cooling system. In light of these challenges the objective of this analysis is to provide more systematic and robust answers in terms of the impacts of different decarbonization strategies in the electricity sector on water demand at global and regional level. The focus is on operational water use for electricity generation.
This report was prepared by the Wuppertal Institute in cooperation with the German Economic Institute as part of the SCI4climate.NRW project. The report aims to shed light on the possible phenomenon that the availability and costs of "green" energy sources may become a relevant location factor for basic materials produced in a climate-neutral manner in the future.
For this purpose, we introduce the term "Renewables Pull". We define Renewables Pull as the initially hypothetical phenomenon of a shift of industrial production from one region to another as a result of different marginal costs of renewable energies (or of secondary energy sources or feedstocks based on renewable energies).
Shifts in industrial production in the sense of Renewables Pull can in principle be caused by differences in the stringency of climate policies in different countries, as in the case of Carbon Leakage. Unlike Carbon Leakage, however, Renewables Pull can also occur if similarly ambitious climate policies are implemented in different countries. This is because Renewables Pull is primarily determined by differences in the costs and availability of renewable energies. In addition, Renewables Pull can also be triggered by cost reductions of renewable energies and by changing preferences on the demand side towards climate-friendly products. Another important difference to Carbon Leakage is that the Renewables Pull effect does not necessarily counteract climate policy.
Similar to Carbon Leakage, it is to be expected that Renewables Pull could become relevant primarily for very energy-intensive products in basic materials industries. In these sectors (e.g. in the steel or chemical industry), there is also the possibility that relocations of specific energy-intensive parts of the production process could trigger domino effects. As a result, large parts of the value chains previously existing in a country or region could also be subjected to an (indirect) Renewables Pull effect.
For the federal state of NRW, in which the basic materials industry plays an important role, the possible emergence of Renewables Pull is associated with significant challenges as climate policy in Germany, the EU and also worldwide is expected to become more ambitious in the future.
This report aims to enable and initiate a deeper analysis of the potential future developments and challenges associated with the Renewables Pull effect. Thus, in the final chapter of the report, several research questions are formulated that can be answered in the further course of the SCI4climate.NRW project as well as in other research projects.
In the Paris Accord to the UN Climate Change Conference COP21 in 2015, the international community agreed to "make every effort" to reach a significant reduction in greenhouse gas (GHG) emissions and to limit global average temperature rise to preferably 1.5°C by 2100 (UNFCC 2018). A transition to a climate-friendly energy supply, however, would come largely at the expense of coal - a fossil fuel with large global reserves that are also widely dispersed regionally. Therefore, especially since the turn of the millennium, the question has been raised as to how coal could be used in a climate-friendly way in the future. So far, the only way to do this is to apply CCS technology or CCU. CCS involves the capture of carbon dioxide (CO2) emissions from fossil fuel-fired power plants or industrial sources and its storage underground, such as in deep saline aquifers or in depleted oil and natural gas fields, or their use for enhanced oil or gas recovery (EOR/EGR). When carbon capture and utilisation (CCU) is applied, the CO2 is further used, for example as feedstock for the production of durable plastics. Due to the relatively low potential of CCU compared to CCS (IPCC 2005), only CCS is considered in this thesis.
The majority of studies and roadmaps have discussed CCS as a technology option that could make a significant contribution to achieving the objective of decreasing GHG emissions for many years (IPCC 2014a, 2018). Particularly in the power sector, however, these expectations have not yet been met. As of November 2019, worldwide only two small base-load power plants, capturing a total of 2.4 Mt CO2/year and mainly using it for EOR, are in operation, together with a few pilots in industrial applications and, in particular, natural gas processing (in total 30 Mt CO2/year) (Global CCS Institute 2019).
Early on, it became clear that the predicted high deployment targets and their underlying studies should be critically questioned for various reasons. Particularly due to the lack of a systems-analytical evaluation of this technology (which was relatively new at the time), no reliable answers could be given about the ecological, economic, social and structural effects of its large-scale application. Such analyses are, however, a pre-condition for comprehensively classifying the contribution of a new technology as a promising option for a sustainable energy supply system and assessing it in comparison to other technologies.
To address these challenges, several studies, most of which initiated by the author, were conducted on this topic between 2004 and 2018. The resulting papers became the basis for this thesis.
Damit sich die weltweit zunehmend ambitionierten Klimaschutzziele erreichen lassen, müssen auch im Industriesektor weitgehende Emissionsreduktionen innerhalb weniger Jahrzehnte realisiert werden. Expertinnen und Experten sind sich einig, dass dies nicht ohne den Umstieg von fossilen auf erneuerbare Energieträger und Rohmaterialien - sogenannte Feedstocks - umsetzbar ist. Im Zuge der verstärkten Nutzung dieser grünen Energieträger ist denkbar, dass sich deren Verfügbarkeit und Kosten zu immer wichtigeren Standortfaktoren für die Produktion industrieller Güter entwickeln werden. Dies könnte dazu führen, dass zukünftig Standorte mit kostengünstiger Verfügbarkeit von erneuerbaren Energien attraktiver gegenüber anderen Standorten werden und es dann zu Standortverlagerungen kommt - insbesondere im Bereich der energieintensiven Industrie.
In dem vorliegenden Artikel greifen die Autoren diese möglichen Verlagerungen industrieller Produktion auf. In diesem Zusammenhang führen sie auch den Begriff "Renewables Pull" ein. Die in bestimmten Regionen der Welt kostengünstig und in großen Mengen verfügbaren erneuerbaren Energien könnten nach Ansicht der Autoren künftig eine Sogwirkung auslösen und bestimmte Teile der industriellen Produktion anziehen - auch Pull-Effekt genannt.
The development of digital technologies is accelerating, enabling increasingly profound changes in increasingly short time periods. The changes affect almost all areas of the economy as well as society. The energy sector has already seen some effects of digitalization, but more drastic changes are expected in the next decades. Besides the very positive impacts on costs, system stability, and environmental effects, potential obstacles and risks need to be addressed to ensure that advantages can be exploited while adverse effects are avoided. A good understanding of available and future digital applications from different stakeholders' perspectives is necessary. This study proposes a framework for the holistic evaluation of digital applications in the energy sector. The framework consists of a combination of well-established methods, namely the multi-criteria analysis (MCA), the life cycle assessment (LCA), and expert interviews. The objective is to create transparency on benefits, obstacles, and risks as a basis for societal and political discussions and to supply the necessary information for the sustainable development and implementation of digital applications. The novelty of the proposed framework is the specific combination of the three methods and its setup to enable sound applicability to the wide variety of digital applications in the energy sector. The framework is tested subsequently on the example of the German smart meter roll-out. The results reveal that, on the one hand, the smart meter roll-out clearly offers the potential to increase the system stability and decrease the carbon emission intensity of the energy system. Therefore, the overall evaluation from an environmental perspective is positive. However, on the other hand, close attention needs to be paid to the required implementation and operational effort, the IT (information technology) and data security, the added value for the user, the social acceptance, and the realization of energy savings. Therefore, the energy utility perspective in particular results in an overall negative evaluation. Several areas with a need for action are identified. Overall, the proposed framework proves to be suitable for the holistic evaluation of this digital application.
Innerhalb des Projekts TFE-NRW bewertete das Wuppertal Institut den Forschungsbedarf für Energiewende-Technologien in Nordrhein-Westfalen. Ziel war es herauszufinden, welche Technologien und Forschungsbereiche im Rahmen der Energieforschung für Nordrhein-Westfalen (NRW) einen besonders hohen Stellenwert in Relation zur Bewertung für Deutschland haben könnten und für die eine besondere Unterstützung innerhalb der Energieforschung gerechtfertigt erscheint. Dabei sollten die speziellen Anforderungen des Bundeslandes berücksichtigt werden.
Betrachtet wurden 31 Technologiefelder aus den Bereichen erneuerbare Energien, konventionelle Kraftwerke, Infrastruktur, Technologien für die Sektorenkopplung (Power-to-X, P2X), energie- und ressourceneffiziente Gebäude, Energie- und Ressourceneffizienz in der Industrie und integrative Aspekte, die mithilfe eines Kriterienrasters qualitativ bewertet wurden.
The German Energiewende is a deliberate transformation of an established industrial economy towards a nearly CO2-free energy system accompanied by a phase out of nuclear energy. Its governance requires knowledge on how to steer the transition from the existing status quo to the target situation (transformation knowledge). The energy system is, however, a complex socio-technical system whose dynamics are influenced by behavioural and institutional aspects, which are badly represented by the dominant techno-economic scenario studies. In this paper, we therefore investigate and identify characteristics of model studies that make agent-based modelling supportive for the generation of transformation knowledge for the Energiewende. This is done by reflecting on the experiences gained from four different applications of agent-based models. In particular, we analyse whether the studies have improved our understanding of policies' impacts on the energy system, whether the knowledge derived is useful for practitioners, how valid understanding derived by the studies is, and whether the insights can be used beyond the initial case-studies. We conclude that agent-based modelling has a high potential to generate transformation knowledge, but that the design of projects in which the models are developed and used is of major importance to reap this potential. Well-informed and goal-oriented stakeholder involvement and a strong collaboration between data collection and model development are crucial.
Electricity generation requires water. With the global demand for electricity expected to increase significantly in the coming decades, the water demand in the power sector is also expected to rise. However, due to the ongoing global energy transition, the future structure of the power supply - and hence future water demand for power generation - is subject to high levels of uncertainty, because the volume of water required for electricity generation varies significantly depending on both the generation technology and the cooling system. This study shows the implications of ambitious decarbonization strategies for the direct water demand for electricity generation. To this end, water demand scenarios for the electricity sector are developed based on selected global energy scenario studies to systematically analyze the impact up to 2040. The results show that different decarbonization strategies for the electricity sector can lead to a huge variation in water needs. Reducing greenhouse gas emissions (GHG) does not necessarily lead to a reduction in water demand. These findings emphasize the need to take into account not only GHG emission reductions, but also such aspects as water requirements of future energy systems, both at the regional and global levels, in order to achieve a sustainable energy transition.
Many countries are increasingly investing in renewable energy technologies to meet growing energy demands and increase the security of their energy supply. This development is also evident in the Middle East and North Africa (MENA) region, where renewable energy targets and policies have evolved rapidly in recent years. There is a steady increase in both the number of planned and implemented solar photovoltaic (PV) but also of solar thermal projects in form of Concentrating Solar Power (CSP) plants. Many of these installations are designed as large utility-scale systems. Despite the fact that these types of large-scale projects can have significant effects on local communities and their livelihoods, the existing research into the social impacts of such large-scale renewable energy infrastructures at local level is limited. However, assessing and managing these impacts is becoming increasingly important to reduce risks to both the affected communities and to the project and businesses activities. In order to provide more robust evidence on the local effects, this research study reviews the social impacts of large-scale renewable energy infrastructure in the MENA region based on a case study of the NOORo I CSP plant in Ouarzazate, Morocco. Data collected during two empirical field studies, in combination with expert interviews and secondary data analysis, provides detailed evidence on the type and significance of livelihood impacts of the NOORo I CSP plant. The analysis results in a consolidated list of 30 impacts and their significance levels for different stakeholder groups including farmers, young people, women, community representatives and owners of small and medium enterprises. The results show that, overall, the infrastructure development was received positively. The review also indicates that factors identified as having effects on the sustainability of local livelihoods are mainly related to information management and benefit distribution, rather than physical or material aspects.
Als Direct Air Capture (DAC) werden Technologien zur Abscheidung von Kohlendioxid aus der Atmosphäre bezeichnet. Diese könnten zunehmend zum Einsatz kommen, um CO2 für Power-to-X-Prozesse (PtX) oder zur Erzielung "negativer Emissionen" bereitzustellen. Die Ergebnisse einer multidimensionalen Bewertung im Rahmen der BMWi-Studie "Technologien für die Energiewende" (et 09/2018) zeigen, dass noch große Unsicherheiten bestehen und die Entwicklung überwiegend an Deutschland vorbeigeht.