Refine
Year of Publication
- 2007 (16) (remove)
Document Type
- Peer-Reviewed Article (16) (remove)
Language
- English (16) (remove)
The material stocks in the anthroposphere are growing faster than ever due to urbanization and growing per capita use. Owing to the growing potential insecurity of raw material supply the evaluation of resources gains increasing attention. Despite growing utilization of anthropogenic deposits, ‘urban mining’ has not yet sufficiently been supported by specific exploration methods. An exploration method for anthropogenic deposits is proposed and described by application to the copper stocks of Switzerland. The method combines material flow analysis with a bottom‐up analysis of material stocks. The stock composition and temporal characteristics are analysed by surveys and literature analysis. The stock amounts to 269±31 kg capita -1 for the year 2000. The retrospective data are used as parameters to construct a dynamic stock model, which is calibrated by historical trade statistics. The potential for drafting scenarios is discussed. The stock situation in Switzerland is reviewed and compared with that of other regions.
The enhanced use of biomass for the production of energy, fuels, and materials is one of the key strategies towards sustainable production and consumption. Various life cycle assessment (LCA) studies demonstrate the great potential of bio-based products to reduce both the consumption of non-renewable energy resources and greenhouse gas emissions. However, the production of biomass requires agricultural land and is often associated with adverse environmental effects such as eutrophication of surface and ground water. Decision making in favor of or against bio-based and conventional fossil product alternatives therefore often requires weighing of environmental impacts. In this article, we apply distance-to-target weighing methodology to aggregate LCA results obtained in four different environmental impact categories (i.e., non-renewable energy consumption, global warming potential, eutrophication potential, and acidification potential) to one environmental index. We include 45 bio- and fossil-based product pairs in our analysis, which we conduct for Germany. The resulting environmental indices for all product pairs analyzed range from -19.7 to +0.2 with negative values indicating overall environmental benefits of bio-based products. Except for three options of packaging materials made from wheat and cornstarch, all bio-based products (including energy, fuels, and materials) score better than their fossil counterparts. Comparing the median values for the three options of biomass utilization reveals that bio-energy (-1.2) and bio-materials (-1.0) offer significantly higher environmental benefits than bio-fuels (-0.3). The results of this study reflect, however, subjective value judgments due to the weighing methodology applied. Given the uncertainties and controversies associated not only with distance-to-target methodologies in particular but also with weighing approaches in general, the authors strongly recommend using weighing for decision finding only as a supplementary tool separately from standardized LCA methodology.
For the option of “carbon capture and storage”, an integrated assessment in the form of a life cycle analysis and a cost assessment combined with a systematic comparison with renewable energies regarding future conditions in the power plant market for the situation in Germany is done. The calculations along the whole process chain show that CCS technologies emit per kWh more than generally assumed in clean-coal concepts (total CO2 reduction by 72-90% and total greenhouse gas reduction by 65-79%) and considerable more if compared with renewable electricity. Nevertheless, CCS could lead to a significant absolute reduction of GHG-emissions within the electricity supply system. Furthermore, depending on the growth rates and the market development, renewables could develop faster and could be in the long term cheaper than CCS based plants. Especially, in Germany, CCS as a climate protection option is phasing a specific problem as a huge amount of fossil power plant has to be substituted in the next 15 years where CCS technologies might be not yet available. For a considerable contribution of CCS to climate protection, the energy structure in Germany requires the integration of capture ready plants into the current renewal programs. If CCS retrofit technologies could be applied at least from 2020, this would strongly decrease the expected CO2 emissions and would give a chance to reach the climate protection goal of minus 80% including the renewed fossil-fired power plants.
The United Nations climate change conference in Nairobi came at the end of a year where public awareness of climate change had reached unprecedented heights. Nonetheless, the conference proceeded with its usual diplomatic ritual, apparently unaffected by time pressure. While it did see some progress on important issues for developing countries such as the Adaptation Fund, the Nairobi Work Programme on Impacts, Vulnerability, and Adaptation to Climate Change, and the Clean Development Mechanism (CDM), on questions regarding the future of the regime it proved to be at best a confidence-building session that served to hear further views. More serious work on the future of the regime must therefore be expected of the next Conferences of the Parties.
This article by Wolfgang Sterk, Hermann E. Ott, Rie Watanabe and Bettina Wittneben summarises the results of the conference.
National welfare is no longer an effective frame of reference for enlightened foreign policy. Policy consideration must encompass the common welfare of a world society. Environmental and resource crises are inextricably tied to security and justice. Sixty years after the founding of the United Nations there should be a new effort to establish a genuinely sustainable global order - a "San Francisco 2.0".
Global climate
(2007)
The use of materials and the generation of waste are linked to economic activities and in many projections these are assumed to be a constant ratio of the economic activities. This may be the case considering detailed economic activities and unchanged technology. However, the assumption of constant coefficients is questionable when linking material use and waste generation to aggregated economic activities. Therefore, in this paper, econometrics is used to test the assumption of constant waste coefficients empirically. The analyses show that an assumption of constant waste coefficients is not supported, generally, and amodel allowing for trendwise changing coefficients is developed and used for projections of waste and material flows in 25 European countries.
Approaches to address unsustainable ways of societal development constantly proliferate, but total consumption of resources and aggregate environmental impacts continue rising. This could partially be explained by weak attempts to develop comprehensive sustainability strategies that address the entire life cycle of products and especially resource extraction and use phases. This paper seeks to explore to what extent these life cycle stages and associated impacts are taken into account when various actors employ life cycle thinking and how these concerns can be better attended to in policy-making, business strategies and lifestyle choices. To accomplish this, we evaluate the efforts of the main stakeholders in reaching sustainable consumption and sustainable resource management, and impediments to further progress, and study whether and how deficits in these phases coincide and can potentially contribute to more holistic practical realization of life cycle thinking. We demonstrate that new approaches are needed to be able to tackle the international dimension of production and consumption.
Scenarios for the future of renewable energy through 2050 are reviewed to explore how much renewable energy is considered possible or desirable and to inform policymaking. Existing policy targets for 2010 and 2020 are also reviewed for comparison. Common indicators are shares of primary energy, electricity, heat, and transport fuels from renewables. Global, Europe-wide, and country-specific scenarios show 10% to 50% shares of primary energy from renewables by 2050. By 2020, many targets and scenarios show 20% to 35% share of electricity from renewables, increasing to the range 50% to 80% by 2050 under the highest scenarios. Carbon-constrained scenarios for stabilization of emissions or atmospheric concentration depict trade-offs between renewables, nuclear power, and carbon capture and storage (CCS) from coal, most with high energy efficiency. Scenario outcomes differ depending on degree of future policy action, fuel prices, carbon prices, technology cost reductions, and aggregate energy demand, with resource constraints mainly for biomass and biofuels.
The Russian natural gas industry is the world's largest producer and transporter of natural gas. This paper aims to characterize the methane emissions from Russian natural gas transmission operations, to explain projects to reduce these emissions, and to characterize the role of emissions reduction within the context of current GHG policy. It draws on the most recent independent measurements at all parts of the Russian long distance transport system made by the Wuppertal Institute in 2003 and combines these results with the findings from the US Natural Gas STAR Program on GHG mitigation options and economics.
With this background the paper concludes that the methane emissions from the Russian natural gas long distance network are approximately 0.6% of the natural gas delivered. Mitigating these emissions can create new revenue streams for the operator in the form of reduced costs, increased gas throughput and sales, and earned carbon credits. Specific emissions sources that have cost-effective mitigation solutions are also opportunities for outside investment for the Joint Implementation Kyoto Protocol flexibility mechanism or other carbon markets.