Refine
Year of Publication
- 2019 (23) (remove)
Document Type
- Report (9)
- Contribution to Periodical (6)
- Peer-Reviewed Article (5)
- Working Paper (2)
- Doctoral Thesis (1)
Division
- Kreislaufwirtschaft (23) (remove)
Der Anlass für die Evaluation des Deutschen Ressourceneffizienzprogramms ProgRess ist seine Fortschreibung im Jahr 2020. In zahlreichen Interviews identifizieren die Autorinnen und Autoren Stärken und Schwächen und zeigen Wege für eine institutionelle und strategische Weiterentwicklung auf. Die Bedeutung des Programms wird als überwiegend positiv, die bisherigen Ressourceneffizienzwirkungen hingegen als durchwachsen bewertet. Den Umsetzungsstand konnten die Befragten wenig beurteilen, da Indikatoren bislang nur für einen Teil der Maßnahmen vorhanden sind. Eine Priorisierung der Aktivitäten, verbindlichere Instrumente und Zielvorgaben sowie eine bessere Mittelausstattung gehören zu den Empfehlungen.
Eine sich vorrangig auf technologische Innovationen und Entlastungsgewinne stützende Wirtschafts- und Umweltpolitik wird für die dauerhafte Senkung der Ressourcennutzung nicht ausreichen. Es bedarf auch kultureller Veränderungen im Umgang mit Ressourcen und ambitionierter und wegweisender politischer Maßnahmen.
The key objective of this deliverable is to gain insights on and assess how CE is being implemented and R&I is being funded at regional level, e.g., via the RIS3 strategy and Structural Funds. As such it sets the scope for the project and provides the background against which programmes and measures can be understood, assessed, developed and recommended in succinct tasks and work packages. The objective of this report is to provide a concise overview of the current R&I priorities, as expressed in running and newly introduced funding and legislative measures with respect to Circular Economy in European countries and regions.
On the basis of a literature research, this subtask develops a conceptional framework for a common understanding of CE within the project team and for the following work packages and tasks. After a brief introduction into the objectives and the context of a circular economy, a more elaborated look into the necessity of an explicit understanding of CE, the objectives, the spatial perspective of CE and the specific challenges within the CICERONE context will be done, in order to develop a basis for a common understanding within the project context. Circular economy can and has to be understood as an (eco-)innovation agenda. Therefore, the paper investigates the role policy has to play to support innovation for a CE transition, for creating the framework conditions and why CE has also to be build from the ground up. Finally, the paper looks from two perspectives at emerging trends and business models in a CE to sketch next steps towards the transition in a selection of central sectors. Conclusions are drawn on the basis of the insights gained by the preceding chapters.
The earth as we know it can only continue to exist if humanity finds a way to switch to a sustainable use of energy and resources. This work contributes to the research carried out to achieve this goal by improving the coating of adsorptive materials. These are used in heat transformation and drying processes that allow for efficient temperature and humidity control in buildings. A central component of these adsorptive coatings is the binder that acts as "glue" in the manufacturing of the coating. In this work the methods to evaluate binder performance regarding their thermal stability under the process conditions, their mechanical stability and their influence on the adsorptive properties of the coating were established. The coatings have to meet special requirements due to the thermal stresses and low pressure atmosphere they experience in these applications. A selection of silicone binders was then characterized with the established tests according to these requirements. Additionally a selection of inorganic binders was investigated because they allow for the use of high desorption temperatures and thus a high energy efficiency of the process. Out of these binders Silres® MP50E emerged as the most promising one due to very good adsorptive properties of the coating, its good temperature stability and ease of use. While some of the inorganic binders showed very good adsorptive properties and temperature stability the mechanical stability of all inorganic binders was not sufficient for their use in adsorption heat transformation technology. This is the first time that a broad selection of binders was evaluated with regards to adsorptive coatings and the results published in literature. With a suitable binder identified, the next step was to optimize the coating of the heat exchangers in order to work out how to manufacture the most efficient and powerful heat exchangers. Samples with different coating thicknesses were manufactured in small scale and full scale and their adsorption behavior was characterized. It could be shown for the first time that it is possible to increase energy efficiency by improving the mass ration of adsorber to coating and increase the delivered power at the same time. This was shown for small and full scale samples. It was shown that under the corresponding conditions the heat transfer from the coating layer to the adsorber metal substrate is the limiting step in the process. These results can now be used for the planning and construction of adsorbers. With knowledge of a suitable binder and how to coat efficient, powerful adsorbers, the coating process itself was improved to allow for industrial scale manufacturing. A central point here is the ability to control slurry rheology. Out of many rheology additives those that are suited for the application in adsorption heat transformation were identified and their influence on the slurry rheology thoroughly characterized. Additionally the process of slurry preparation could be simplified for several different adsorbents. Here it was shown that the supersonic deagglomeration step is not necessary to prepare a slurry. Extending the possible coating techniques and in addition to the dip coating process used so far, the spray coating of adsorptive coatings was established for the first time in literature. This process is widely used in the industry and allows for easier plugin into existing coating processes. For the coating of high resolution patterns a proof of concept of the screen printing process was carried out.
Digital platforms may yield a host of advantages in putting circular economy into effect. This paper analyses the related chances and discusses requirements of digital platforms for the realization of a circular economy. It specifically points to potential solutions offered by digital platforms for existing barriers. From there it identifies issues that need specific attendance to create economically and ecologically functional platforms. Three economically relevant perspectives are discussed for this: a management perspective, a legislative perspective and a social/systems perspective.
With the introduction of the Roadmap to a Resource Efficient Europe (2011) and the more recent commitment of The Action Plan towards the Circular Economy (2015), the European Commission (EC) has expressed its fundamental interest to substantially improve the resource efficiency of the European economy and enable the transition towards the Circular Economy (CE). This policy push has meanwhile been complemented by some quite ambitious national programmes for RE and CE and institutional advances but it is not yet bound to targets or mandatory reporting.
Against this background, the objective of this paper is to give a comprehensive overview of the current policy frameworks at EU and a selection of MSs and provide insights into the elements shaping policy processes. The analytical framework relies on three essential interconnected components: the policy framework, the economic incentive system and economic side policies which are relevant in the context of RE and CE and actor constellations. The paper does this looking at the interface between EU-MSs. The analysis is based on different empirical surveys in which the policy development is observed and discussed (EEA 2011, 2016a, 2016b, EIO 2013, 2014, 2016) and a comprehensive review of legislative and policy frameworks at the EU and selected MSs, undertaken as part of the project POLFREE (Policy option for a Resource-Efficient Economy) (Domenech et al., 2014, Bahn-Walkowiak et al., 2014). The analysis reveals that policy frameworks for RE/CE are complex and fragmented as competing goals and visions reduce effectiveness of measures. The paper makes recommendations as to how EU and MS policies could improve RE in a coordinated way, but recognizes that achieving such coordination will be challenging in the current political context.