Refine
Year of Publication
Document Type
- Peer-Reviewed Article (28) (remove)
Language
- English (28) (remove)
Division
The production of commodities by energy-intensive industry is responsible for 1/3 of annual global greenhouse gas (GHG) emissions. The climate goal of the Paris Agreement, to hold the increase in the global average temperature to well below 2 °C above pre-industrial levels while pursuing efforts to limit the temperature increase to 1.5 °C, requires global GHG emissions reach net-zero and probably negative by 2055-2080. Given the average economic lifetime of industrial facilities is 20 years or more, this indicates all new investment must be net-zero emitting by 2035-2060 or be compensated by negative emissions to guarantee GHG-neutrality. We argue, based on a sample portfolio of emerging and near-commercial technologies for each sector (largely based on zero carbon electricity & heat sources, biomass and carbon capture, and catalogued in an accompanying database), that reducing energy-intensive industrial GHG emissions to Paris Agreement compatible levels may not only be technically possible, but can be achieved with sufficient prioritization and policy effort. We then review policy options to drive innovation and investment in these technologies. From this we synthesize a preliminary integrated strategy for a managed transition with minimum stranded assets, unemployment, and social trauma that recognizes the competitive and globally traded nature of commodity production. The strategy includes: an initial policy commitment followed by a national and sectoral stakeholder driven pathway process to build commitment and identify opportunities based on local zero carbon resources; penetration of near-commercial technologies through increasing valuation of GHG material intensity through GHG pricing or flexible regulations with protection for competitiveness and against carbon leakage; research and demand support for the output of pilot plants, including some combination of guaranteed above-market prices that decline with output and an increasing requirement for low carbon inputs in government procurement; and finally, key supporting institutions.
Given large potentials of the MENA region for renewable energy production, transitions towards renewables-based energy systems seem a promising way for meeting growing energy demand while contributing to greenhouse gas emissions reductions according to the Paris Agreement at the same time. Supporting and steering transitions to a low-carbon energy system require a clear understanding of socio-technical interdependencies in the energy system as well as of the principle dynamics of system innovations. For facilitating such understanding, a phase model for renewables-based energy transitions in MENA countries, which structures the transition process over time through the differentiation of a set of sub-sequent distinct phases, is developed in this article. The phase model builds on a phase model depicting the German energy transition, which was complemented by insights about transition governance and adapted to reflect characteristics of the MENA region. The resulting model includes four phases ("Take-off renewables", "System integration", "Power to fuel/gases”, "Towards 100% renewables”), each of which is characterized by a different cluster of innovations. These innovations enter the system via three stages of development which describe different levels of maturity and market penetration, and which require appropriate governance. The phase model has the potential to support strategy development and governance of energy transitions in MENA countries in two complementary ways: it provides an overview of techno-economic developments as orienting guidelines for decision-makers, and it adds some guidance as to which governance approaches are suitable for supporting those developments.
At current primary steel production levels, the iron and steel industry will fail to meet the 80% emission reduction target without introduction of breakthrough technologies (Wörtler et al., 2013: 19). The current research analyses the technical and economical long-term potential of innovative primary steel production technologies in Germany throughout 2100. Techno-economic models are used to simulate three innovative ore-based steelmaking routes verses the reference blast furnace route (BF-BOF). The innovative routes in focus are blast furnace with CCS (BF-CCS), hydrogen direct reduction (H-DR), and iron ore electrolysis (EW). Energy and mass flows for the production of one tonne of crude steel (CS) are combined with hypothetical price, cost, and revenue data to evaluate the production routes economically, technically, and environmentally. This is a purely theoretical analysis and hence further external factors that may influence practical implementation or profitability are not considered.
Different future developments are considered by using three scenarios, representing an ambitious, a moderate, and a conservative transformation of the German energy sector. In general, looking into the future bares various uncertainties which should be reflected in a suitable manner.
According to the present scenario analysis, chances are that with rising prices for coal and CO2 allowances BF-BOF and even BF-CCS become unprofitable by mid-century. With a high share of renewable energy sources and high prices for CO2 allowances, H-DR and EW become economically attractive in the second half of the current century, when BF-based routes are long unprofitable. Energy and raw material efficiency is significantly higher for H-DR and EW and furthermore, the 80% reduction target by 2050 can be achieved in the ambitious scenario. However, high investment costs and high dependency on electricity prices prohibit a profitable implementation before 2030–2040 without further subsidies. EW is the most energy and resource efficient production route. Since continuous electricity is needed for the continuous operation, the electricity costs are 20–40% higher than for H-DR (with high-capacity hydrogen storage units). Even though hydrogen production implies efficiency losses compared to the EW route, the decoupling of hydrogen production from continuous operation of the steel plant through hydrogen storage offers the opportunity to use cheap excess renewable electricity. This makes the H-DR economically and environmentally the most attractive route and provides a crucial contribution to stabilize the grid and to store excess energy in a 100% renewable energy system.
Based on different current long-term energy scenarios the paper discusses the future perspectives of hydrogen in the German energy system as a representative example for the development of sustainable energy systems. The scenario analysis offers varying outlines of the future energy system that determine the possible role of hydrogen. The paper discusses the possibilities of expanding the share of renewable energy and the resulting prospects for establishing clean hydrogen production from renewable energy sources. Emphasis is given to the questions of an ecologically efficient allocation of limited renewable energy resources that can only be assessed from asystems analysis perspective. Findings from recent studies for Germany reveal a strong competition between the direct input into the electricity system and an indirect use as fuel in the transport sector. Moreover, the analysis underlines the paramount importance of reducing energy demand as the inevitable prerequisite for any renewable energy system.
The role of hydrogen in long run sustainable energy scenarios for the world and for the case of Germany is analysed, based on key criteria for sustainable energy systems. The possible range of hydrogen within long-term energy scenarios is broad and uncertain depending on assumptions on used primary energy, technology mix, rate of energy efficiency increase and costs degression ("learning effects"). In any case, sustainable energy strategies must give energy efficiency highest priority combined with an accelerated market introduction of renewables ("integrated strategy"). Under these conditions hydrogen will play a major role not before 2030 using natural gas as a bridge to renewable hydrogen. Against the background of an ambitious CO2-reduction goal which is under discussion in Germany the potentials for efficiency increase, the necessary structural change of the power plant system (corresponding to the decision to phase out nuclear energy, the transformation of the transportation sector and the market implementation order of renewable energies ("following efficiency guidelines first for electricity generation purposes, than for heat generation and than for the transportation sector")) are analysed based on latest sustainable energy scenarios.
New energy technologies may fail to make the transition to the market once research funding has ended due to a lack of private engagement to conclude their development. Extending public funding to cover such experimental developments could be one way to improve this transition. However, identifying promising research and development (R&D) proposals for this purpose is a difficult task for the following reasons: Close-to-market implementations regularly require substantial resources while public budgets are limited; the allocation of public funds needs to be fair, open, and documented; the evaluation is complex and subject to public sector regulations for public engagement in R&D funding. This calls for a rigorous evaluation process. This paper proposes an operational three-staged decision support system (DSS) to assist decision-makers in public funding institutions in the ex-ante evaluation of R&D proposals for large-scale close-to-market projects in energy research. The system was developed based on a review of literature and related approaches from practice combined with a series of workshops with practitioners from German public funding institutions. The results confirm that the decision-making process is a complex one that is not limited to simply scoring R&D proposals. Decision-makers also have to deal with various additional issues such as determining the state of technological development, verifying market failures or considering existing funding portfolios. The DSS that is suggested in this paper is unique in the sense that it goes beyond mere multi-criteria aggregation procedures and addresses these issues as well to help guide decision-makers in public institutions through the evaluation process.
New options are needed to reduce the impact of motor vehicles on climate change and declining fossil fuel resources. Cars which are fueled by hydrogen could be a sustainable method of transportation if suitable technologies can be devised to produce hydrogen in an environmentally benign manner along with the provision of the necessary fueling infrastructure. This paper assesses size, space, and cost requirements of bioreactors as a decentralized option to supply hydrogen powered cars with biohydrogen produced from algae or cyanobacteria on a theoretical basis. Decentralized supply of biohydrogen could help to reduce the problems that hydrogen cars face regarding market penetration. A feasibility study for decentralized biohydrogen production is conducted, taking the quantity of hydrogen which is needed to fuel current hydrogen cars into account. While this technology is, in theory, feasible, sizes, and costs of such reactors are currently too high for widespread adoption. Thus, more R&D is needed to close the gap and to approach marketability.
Because of high efficiency, low environmental impacts and a potential role in transforming our energy system into a hydrogen economy, fuel cells are often considered as a key technology for a sustainable energy supply. However, the future framing conditions under which stationary fuel cells have to prove their technical and economic competitiveness are most likely characterised by a reduced demand for space heating, and a growing contribution of renewable energy sources to heat and electricity supply, which both directly limit the potential for combined heat and power generation, and thus also for fuelcells. Taking Germany as a case study, this paper explores the market potential of stationaryfuelcells under the structural changes of the energy demand and supply system required to achieve asustainable energy supply. Results indicate that among the scenarios analysed it is in particular a strategy oriented towards ambitious CO2-reduction targets, which due to its changes in the supply structure is in a position to mobilise a market potential that might be large enough for a successful fuel cell commercialisation. However, under the conditions of a business-as-usual trajectory the sales targets of fuel cell manufacturers cannot be met.
The Russian natural gas industry is the world's largest producer and transporter of natural gas. This paper aims to characterize the methane emissions from Russian natural gas transmission operations, to explain projects to reduce these emissions, and to characterize the role of emissions reduction within the context of current GHG policy. It draws on the most recent independent measurements at all parts of the Russian long distance transport system made by the Wuppertal Institute in 2003 and combines these results with the findings from the US Natural Gas STAR Program on GHG mitigation options and economics.
With this background the paper concludes that the methane emissions from the Russian natural gas long distance network are approximately 0.6% of the natural gas delivered. Mitigating these emissions can create new revenue streams for the operator in the form of reduced costs, increased gas throughput and sales, and earned carbon credits. Specific emissions sources that have cost-effective mitigation solutions are also opportunities for outside investment for the Joint Implementation Kyoto Protocol flexibility mechanism or other carbon markets.