Refine
Year of Publication
Document Type
- Peer-Reviewed Article (24) (remove)
Division
- Nachhaltiges Produzieren und Konsumieren (24) (remove)
Resource use of wind farms in the German North Sea : the example of Alpha Ventus and Bard Offshore I
(2013)
The German government aims to obtain at least 40 percent of its electricity from renewable sources by 2030. One of the central steps to reach this target is the construction of deep sea offshore wind farms. The paper presents a material intensity analysis of the offshore wind farms "Alpha Ventus" and "Bard Offshore I" under consideration of the grid connection. An additional onshore scenario is considered for comparison. The results show that offshore wind farms have higher resource consumption than onshore farms. In general, and in respect to the resource use of other energy systems, both can be tagged as resource efficient.
Assessing the natural resource use and the resource efficiency potential of the Desertec concept
(2013)
Considering global warming, increasing commodity prices, and the dramatic consequences of the over-exploitation and overuse of resources, a transition to a renewable energy supply is necessary. This requires an (resource) efficient and renewable supply of operating reserve. In this article, a possible solution to this problem is analysed: the Desertec concept. It is meant to convert solar energy in areas with high solar irradiation into electrical energy by means of Concentrated Solar Power (CSP) transferring this energy by High Voltage Direct Current (HVDC) lines into the whole European Union Middle East and North Africa (EU-MENA) area. In order to assess the resource efficiency potential of Desertec, three different kinds of CSP plants (parabolic trough, Fresnel collector and central receiver of the building classes Inditep, Novatec and Solar Tres) including heat storage systems (Molten Salt and Phase-Changing-Material) and the necessary HVDC are analysed using the Material Input per Service Unit (MIPS) methodology. The assessment is accomplished for three different locations (Morocco, Tunisia and Egypt) and two points of time (2025 and 2050). With these results, a scenario of electricity supply in Germany in 2050 with a 20% share of solar power import is calculated. Central receivers are the most resource efficient ones: their consumption of abiotic materials is only half of parabolic trough plants and two thirds of Fresnel trough plants. Water and air consumption is the lowest of all analyzed CSP plants as well. The scenario for Germany's fuel mix in 2050 shows that a predominantly renewable fuel mix reduces the consumption of abiotic materials by 75%, of water by 60% and of air by 45%. Only the consumption of biotic materials rises due to the higher share of biomass conversion.
Despite rising prices for natural resources during the past 30 years, global consumption of natural resources is still growing. This leads to ecological, economical and social problems. So far, however, limited effort has been made to decrease the natural resource use of goods and services. While resource efficiency is already on the political agenda (EU and national resource strategies), there are still substantial knowledge gaps on the effectiveness of resource efficiency improvement strategies in different fields. In this context and within the project "Material Efficiency and Resource Conservation", the natural resource use of 22 technologies, products and strategies was calculated and their resource efficiency potential analysed. In a preliminary literature- and expert-based identification process, over 250 technologies, strategies, and products, which are regarded as resource efficient, were identified. Out of these, 22 subjects with high resource efficiency potential were selected. They cover a wide range of relevant technologies, products and strategies, such as energy supply and storage, Green IT, transportation, foodstuffs, agricultural engineering, design strategies, lightweight construction, as well as the concept "Using Instead of Owning". To assess the life-cycle-wide resource use of the selected subjects, the material footprint has been applied as a reliable indicator. In addition, sustainability criteria on a qualitative basis were considered. The results presented in this paper show significant resource efficiency potential for many technologies, products and strategies.
The food and agricultural sector will face numerous challenges in the next decades, arising from changing global production and consumption patterns, which currently go along with high resource use, causing ecological and socio-economic impacts. The aim of this paper is to illustrate and evaluate the practical applicability of the Hot Spot Analysis methodology in the context of supply chain management in companies. The HSA is a method to identify social and ecological problems along the entire life cycle of a product. Special emphasis is put on a customized implementation in the value chain beef of McDonald's Germany. The HSA of McDonald's beef value chain shows that the main ecological problems arise in the phase of raw material extraction, whereas the main social problems can be identified in the phase of slaughtering. Finally, the paper shows potentials and shortcomings of such a customized application and how the results can be implemented in the sustainability management of a company.
The article estimates the natural resource consumption due to nutrition from the supply and demand sides. Using the MIPS (Material Input per Service Unit) methodology, we analyzed the use of natural resources along the supply chains of three Italian foodstuffs: wheat, rice and orange-based products. These figures were then applied for evaluating the sustainability of diets in 13 European countries. The results outline which phases in food production are more natural resource demanding than others. We also observed different levels of sustainability in the European diets and the effect of different foodstuffs in the materials, water and air consumption.
Aufgrund seiner starken Umweltauswirkungen gilt der Lebensmittelsektor durch Effekte in Produktion, Verarbeitung, Konsum und Entsorgung gemeinhin als ein wichtiges Handlungsfeld, soll eine gesellschaftliche Transformation in Richtung Nachhaltigkeit weiter vorangetrieben werden. Da Ernährungsgewohnheiten sowohl ökologische Auswirkungen induzieren als auch gesundheitliche Folgen für die Verbraucher haben, sind Konzepte gefragt, die ökologische mit gesundheitlichen Indikatoren kombinieren; diese sind jedoch bislang rar. Das vorgestellte Instrument des Nutritional Footprint greift diese Problemstellung auf und verbindet in einem innovativen Konzept jeweils vier Kernindikatoren beider Dimensionen. Mithilfe des Konzepts erhalten Verbraucher einen Überblick zu Umwelt- und Gesundheitswirkungen ihrer Ernährung. Unternehmen können wiederum interne Datensätze verwalten, Benchmarking betreiben und ihre externe Kommunikationsleistung erweitern.
The field of nutrition will face numerous challenges in coming decades; these arise from changing lifestyles and global consumption patterns accompanied by a high use of resources. Against this background, this paper presents a newly designed tool to decrease the effect on nutrition, the so-called Nutritional Footprint. The tool is based on implementing the concept of a sustainable diet in decision-making processes, and supporting a resource-light society. The concept integrates four indicators in each of the two nutrition-related fields of health and environment, and condenses them into an easily communicable result, which limits its results to one effect level. Applied to eight lunch meals, the methodology and its calculations procedures are presented in detail. The results underline the general scientific view of food products; animal-protein based meals are more relevant considering their health and environmental effects. The concept seems useful for consumers to evaluate their own choices, and companies to expand their internal data, their benchmarking processes, or their external communication performance. Methodological shortcomings and the interpretation of results are discussed, and the conclusion shows the tools' potential for shaping transition processes, and for the reduction of natural resource use by supporting food suppliers' and consumers' decisions and choice.
Purpose - The purpose of this paper is to summarize and discuss the results from the LIVING LAB design study, a project within the 7th Framework Programme of the European Union. The aim of this project was to develop the conceptual design of the LIVING LAB Research Infrastructure that will be used to research human interaction with, and stimulate the adoption of, sustainable, smart and healthy innovations around the home.
Design/methodology/approach - A LIVING LAB is a combined lab-/household system, analysing existing product-service-systems as well as technical and socioeconomic influences focused on the social needs of people, aiming at the development of integrated technical and social innovations and simultaneously promoting the conditions of sustainable development (highest resource efficiency, highest user orientation, etc.). This approach allows the development and testing of sustainable domestic technologies, while putting the user on centre stage.
Findings - As this paper discusses the design study, no actual findings can be presented here but the focus is on presenting the research approach.
Originality/value - The two elements (real homes and living laboratories) of this approach are what make the LIVING LAB research infrastructure unique. The research conducted in LIVING LAB will be innovative in several respects. First, it will contribute to market innovation by producing breakthroughs in sustainable domestic technologies that will be easy to install, user friendly and that meet environmental performance standards in real life. Second, research from LIVING LAB will contribute to innovation in practice by pioneering new forms of in-context, user-centred research, including long-term and cross-cultural research.
The concept Material Input per Service Unit (MIPS) was developed 20 years ago as a measure for the overall natural resource use of products and services. The material intensity analysis is used to calculate the material footprint of any economic activities in production and consumption. Environmental assessment has developed extensive databases for life cycle inventories, which can additionally be adopted for material intensity analysis. Based on practical experience in measuring material footprints on the micro level, this paper presents the current state of research and methodology development: it shows the international discussions on the importance of accounting methodologies to measure progress in resource efficiency. The MIPS approach is presented and its micro level application for assessing value chains, supporting business management, and operationalizing sustainability strategies is discussed. Linkages to output-oriented Life Cycle Assessment as well as to Material Flow Analysis (MFA) at the macro level are pointed out. Finally we come to the conclusion that the MIPS approach provides relevant knowledge on resource and energy input at the micro level for fact-based decision-making in science, policy, business, and consumption.